Commit graph

210 commits

Author SHA1 Message Date
Kumar Gala
396f635b8f bootm: refactor image detection and os load steps
Created a bootm_start() that handles the parsing and detection of all
the images that will be used by the bootm command (OS, ramdisk, fdt).
As part of this we now tract all the relevant image offsets in the
bootm_headers_t struct. This will allow us to have all the needed
state for future sub-commands and lets us reduce a bit of arch
specific code on SPARC.

Created a bootm_load_os() that deals with decompression and loading
the OS image.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-26 23:41:43 +02:00
Kumar Gala
e906cfae08 bootm: move lmb into the bootm_headers_t structure
To allow for persistent state between future bootm subcommands we
need the lmb to exist in a global state.
Moving it into the bootm_headers_t allows us to do that.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-26 23:38:48 +02:00
Kumar Gala
06a09918f3 bootm: refactor fdt locating and relocation code
Move the code that handles finding a device tree blob and relocating
it (if needed) into common code so all arch's have access to it.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-26 23:37:12 +02:00
Kumar Gala
c4f9419c6b bootm: refactor ramdisk locating code
Move determing if we have a ramdisk and where its located into the
common code. Keep track of the ramdisk start and end in the
bootm_headers_t image struct.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-26 23:35:24 +02:00
Kumar Gala
c160a95447 bootm: refactor entry point code
Move entry point code out of each arch and into common code.
Keep the entry point in the bootm_headers_t images struct.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-26 23:31:33 +02:00
Wolfgang Denk
0bf202ec58 Revert "[new uImage] Add autostart flag to bootm_headers structure"
This reverts commit f5614e7926.

The commit was based on a misunderstanding of the (documented)
meaning of the 'autostart' environment variable. It might cause
boards to hang if 'autostart' was used, with the potential to brick
them. Go back to the documented behaviour.

Conflicts:

	common/cmd_bootm.c
	common/image.c
	include/image.h

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-08-10 01:26:26 +02:00
Becky Bruce
391fd93ab2 Change lmb to use phys_size_t/phys_addr_t
This updates the lmb code to use phys_size_t
and phys_addr_t instead of unsigned long.  Other code
which interacts with this code, like getenv_bootm_size()
is also updated.

Booted on MPC8641HPCN, build-tested ppc, arm, mips.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-12 00:56:39 +02:00
Bartlomiej Sieka
7590378fb9 Use watchdog-aware functions when calculating hashes of images - take two
Some files didn't get updated properly with the "Use watchdog-aware
functions when calculating hashes of images" commit, this commit
fixes this.

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-25 14:05:21 +02:00
Bartlomiej Sieka
edbed247a1 Memory footprint optimizations
As suggested by Wolfgang Denk:
- image printing functions:
  - remove wrappers
  - remove indentation prefix from functions' signatures
- merge getenv_verify and getenv_autostart into one parametrized function

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-04-24 17:21:55 +02:00
Marian Balakowicz
cb1c489690 Restore the ability to continue booting after legacy image overwrite
Before new uImage code was merged, bootm code allowed for the kernel image to
get overwritten during decompresion. new uImage introduced a check for image
overwrites and refused to boot the image that got overwritten. This patch
restores the old behavior. It also adds a warning when the image overwriten is
a multi-image file, because in such case accessing componentes other than the
first one will fail.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-04-17 23:59:05 -07:00
Daniel Hellstrom
bf3d8b3116 SPARC: added SPARC support for new uimage in common code.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2008-04-08 07:58:32 +00:00
Bartlomiej Sieka
95f4ec2b9c [new uImage] Do not compile new uImage format support by default
Disable default building of new uImage format support in preparation
for merge with the master. Support for new format can be enabled on
a per-board basis, by defining the following in the board's config file:

#define CONFIG_FIT             1
#define CONFIG_OF_LIBFDT       1

This can be optionally defined to give more verbose output:

#define CONFIG_FIT_VERBOSE     1 /* enable fit_format_{error,warning}() */

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-03-20 23:23:13 +01:00
Bartlomiej Sieka
766529fccc Add MD5 support to the new uImage format
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-03-14 16:22:34 +01:00
Marian Balakowicz
1ec73761d2 [new uImage] Fix definition of common bootm_headers_t fields
verify, autostart and lmb fields are used regardless of CONFIG_FIT
setting, move their definitions to common section.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-03-12 10:35:52 +01:00
Marian Balakowicz
f773bea8e1 [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used
Save FIT configuration provied in the first bootm argument and use it
when to get ramdisk/FDT subimages when second and third (ramdisk/FDT)
arguments are not specified.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-03-12 10:35:46 +01:00
Marian Balakowicz
3dfe110149 [new uImage] Add node offsets for FIT images listed in struct bootm_headers
This patch adds new node offset fields to struct bootm_headers
and updates bootm_headers processing code to make use of them.
Saved node offsets allow to avoid repeating fit_image_get_node() calls.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-03-12 10:32:59 +01:00
Marian Balakowicz
d985c8498c [new uImage] Remove unnecessary arguments passed to ramdisk routines
boot_get_ramdisk() and image_get_ramdisk() do not need all
cmdtp, flag, argc and argv arguments. Simplify routines definition.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-03-12 10:14:38 +01:00
Bartlomiej Sieka
9d25438fe7 [new uImage] Add support for new uImage format to mkimage tool
Support for the new uImage format (FIT) is added to mkimage tool.
Commandline syntax is appropriately extended:

mkimage [-D dtc_options] -f fit-image.its fit-image

mkimage (together with dtc) takes fit-image.its and referenced therein
binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the
final image that can be transferred to the target (e.g., via tftp) and then
booted using the bootm command in U-Boot.

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-03-11 12:34:47 +01:00
Marian Balakowicz
eb6175edd6 [new uImage] Make node unit names const in struct bootm_headers
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-03-10 17:53:49 +01:00
Marian Balakowicz
5dfb521386 [new uImage] New uImage low-level API
Add FDT-based functions for handling new format component images,
configurations, node operations, property get/set, etc.

fit_        - routines handling global new format uImage operations
              like get/set top level property, process all nodes, etc.
fit_image_  - routines handling component images subnodes
fit_conf_   - routines handling configurations node

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-03-10 17:51:07 +01:00
Marian Balakowicz
570abb0ad1 [new uImage] Share common uImage code between mkimage and U-boot
This patch adds the following common routines:

1) Dedicated mkimage print_header() is replaced with common
image_print_contents()
image_print_contents_noindent()

2) Common os/arch/type/comp fields name <--> id translation routines
genimg_get_os_name()
genimg_get_arch_name()
genimg_get_type_name()
genimg_get_comp_name()
genimg_get_os_id()
genimg_get_arch_id()
genimg_get_type_id()
genimg_get_comp_id()

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-29 15:59:59 +01:00
Marian Balakowicz
9a4daad0a3 [new uImage] Update naming convention for bootm/uImage related code
This patch introduces the following prefix convention for the
image format handling and bootm related code:

genimg_		- dual format shared code
image_		- legacy uImage format specific code
fit_		- new uImage format specific code
boot_		- booting process related code

Related routines are renamed and a few pieces of code are moved around and
re-grouped.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-29 14:58:34 +01:00
Kumar Gala
d3f2fa0d27 [new uImage] Provide ability to restrict region used for boot images
Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way
to restrict what memory range is used for bootm.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Marian Balakowicz <m8@semihalf.com>
2008-02-29 13:15:56 +01:00
Kumar Gala
e822d7fc4d [new uImage] Use lmb for bootm allocations
Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd()
functions over to using lmb for allocation of the ramdisk, command line
and kernel bd info.

Convert PPC specific fdt_relocate() to use lmb for allocation of the device
tree.

Provided a weak function that board code can call to do additional
lmb reserves if needed.

Also introduce the concept of bootmap_base to specify the offset in
physical memory that the bootmap is located at.  This is used for
allocations of the cmdline, kernel bd, and device tree as they should
be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-29 13:15:56 +01:00
Kumar Gala
f5614e7926 [new uImage] Add autostart flag to bootm_headers structure
The autostart env variable was dropped as part of the initial new uImage
cleanup.  Add it back here so the arch specific code can decide if it
wants to really boot or not.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Marian Balakowicz <m8@semihalf.com>
2008-02-29 13:15:56 +01:00
Kumar Gala
4ed6552f71 [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images
Introduce the LMB lib used on PPC in the kernel as a clean way to manage
the memory spaces used by various boot images and structures.  This code
will allow us to simplify the code in bootm and its support functions.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-29 13:15:55 +01:00
Kumar Gala
274cea2bdd [new uImage] rework error handling so common functions don't reset
Changed image_get_ramdisk() to just return NULL on error and have
get_ramdisk() propogate that error to the caller.  It's left to the
caller to call do_reset() if it wants to.

Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
to a common location.  In the future we will change get_fdt() and
fdt_relocate() to return success/failure and not call do_reset() at all.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Marian Balakowicz <m8@semihalf.com>
2008-02-29 12:32:50 +01:00
Kumar Gala
a6612bdfe7 [new uImage] Don't pass kdb to ramdisk_high since we may not have one
We don't actually need the kdb param as we are just using it to get
bd->bi_memsize which we can get from gd->bd->bi_memsize.  Also, if we
boot via OF we might not actually fill out a kdb.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Marian Balakowicz <m8@semihalf.com>
2008-02-29 12:27:21 +01:00
Marian Balakowicz
4efbe9dbb1 [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled
Dual format image code must properly handle all three FDT passing methods:
- raw FDT blob passed
- FDT blob embedded in the legacy uImage
- FDT blob embedded in the new uImage

This patch enables proper raw FDT handling when no FIT imaeg support
is compiled in. This is a bit tricky as we must dected FIT format even
when FIT uImage handling is not enabled as both FIT uImages and raw FDT
blobs use tha same low level format (libfdt).

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-27 11:02:26 +01:00
Marian Balakowicz
8a5ea3e616 [new uImage] Move image verify flag to bootm_headers structure
Do not pass image verification flag directly to related routines.
Simplify argument passing and move it to the bootm_header structure which
contains curently processed image specific data and is already being passed
on the argument list.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-27 11:01:04 +01:00
Marian Balakowicz
d5934ad775 [new uImage] Add dual format uImage support framework
This patch adds framework for dual format images. Format detection is added
and the bootm controll flow is updated to include cases for new FIT format
uImages.

When the legacy (image_header based) format is detected appropriate
legacy specific handling is invoked. For the new (FIT based) format uImages
dual boot framework has a minial support, that will only print out a
corresponding debug messages. Implementation of the FIT specific handling will
be added in following patches.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-25 15:53:49 +01:00
Marian Balakowicz
2242f53698 [new uImage] Rename and move print_image_hdr() routine
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-21 17:27:41 +01:00
Marian Balakowicz
f50433d670 [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines
Introducing routines for parsing new uImage format bootm arguments:
[<addr>]#<conf>		- configuration specification
[<addr>]:<subimg>	- subimage specification

New format images can contain multiple subimages of the same type. For example
a single new format image file can contain three kernels, two ramdisks and a
couple of FDT blobs. Subimage and configuration specifications are extensions
to bootm (and other image-related commands) arguments' syntax that allow to
specify which particular subimage should be operated on.

Subimage specification is used to denote a particular subimage. Configurations
are a bit more complex -- they are used to define a particualr booting setup,
for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple,
etc.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-21 17:20:20 +01:00
Marian Balakowicz
fff888a199 [new uImage] Add gen_get_image() routine
This routine assures that image (whether legacy or FIT) is not
in a special dataflash storage.

If image address is a dataflash address image is moved to system RAM.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-21 17:20:19 +01:00
Marian Balakowicz
75d3e8fbd9 [new uImage] Pull in libfdt if CONFIG_FIT is enabled
New uImage format (Flattened Image Tree) requires libfdt
functionality, print out error message if CONFIG_OF_LIBFDT
is not defined.

New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
This commit turns it on by default.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-21 17:20:18 +01:00
Marian Balakowicz
b6b0fe6460 [new uImage] Cleanup do_botm_linux() boot allocations
This patch moves common pre-boot allocation steps shared between PPC
and M68K to a helper routines:

common:
- get_boot_sp_limit()
- get_boot_cmline()
- get_boot_kbd()

platform:
- set_clocks_in_mhz()

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:13:00 +01:00
Marian Balakowicz
ceaed2b1e5 [new uImage] Move ramdisk loading to a common routine
Ramdisk loading code, including initrd_high variable handling,
was duplicated for PPC and M68K platforms. This patch creates
common helper routine that is being called from both platform
do_bootm_linux() routines.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:13:00 +01:00
Marian Balakowicz
5ad03eb385 [new uImage] Factor out common image_get_ramdisk() routine
Architecture specific do_bootm_linux() routines share common
ramdisk image processing code. Move this code to a common
helper routine.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:59 +01:00
Marian Balakowicz
42b73e8ee0 [new uImage] Factor out common routines for getting os/arch/type/comp names
Move numeric-id to name translation for image os/arch/type/comp header
fields to a helper routines: image_get_os_name(), image_get_arch_name(),
image_get_type_name(), image_get_comp_name().

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:58 +01:00
Marian Balakowicz
f13e7b2e99 [new uImage] Cleanup image header pointer use in bootm code
- use single image header pointer instead of a set of auxilliary variables.
- add multi component image helper routines: get component size/data address

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:57 +01:00
Marian Balakowicz
af13cdbc01 [new uImage] Add memmove_wd() common routine
Move common, watchdog sensible memmove code to a helper memmmove_wd() routine.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:56 +01:00
Marian Balakowicz
559316faf7 [new uImage] Move CHUNKSZ definition to image.h
CHUNKSZ defined for PPC and M68K is set to the same value of 64K,
move this definition to a common header.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:55 +01:00
Marian Balakowicz
b97a2a0a21 [new uImage] Define a API for image handling operations
- Add inline helper macros for basic header processing
- Move common non inline code common/image.c
- Replace direct header access with the API routines
- Rename IH_CPU_* to IH_ARCH_*

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
2008-02-07 01:12:53 +01:00
Sean MCGOOGAN
38c1ef728d Allocate CPU Architecture Code for STMicroelectronics' ST200.
Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
---------------------------------------------------
2007-09-10 22:24:23 +02:00
Wolfgang Denk
fb883a521e Merge with /home/wd/git/u-boot/master 2006-10-11 14:15:21 +02:00
Stefan Roese
1a1b7374b8 Define IH_CPU_AVR32
Make it possible to generate AVR32 uImage files with mkimage and
make cmd_bootm recognize them.
Patch by Haavard Skinnemoen, 22 Sep 2006
2006-10-09 13:02:00 +02:00
Matthew McClintock
25c751e9ad * Support for FDT in uImage format, error when using FDT from flash
Signed-off-by: Matthew McClintock <msm@freescale.com>
2006-08-16 10:54:09 -05:00
Wolfgang Denk
0afe519a43 Add ADI Blackfin support
- add support for Analog Devices Blackfin BF533 CPU
- add support for the ADI BF533 Stamp uClinux board
- add support for the ADI BF533 EZKit board
Patches by Richard Klingler, June 11th 2005:
2006-03-12 02:10:00 +01:00
Wolfgang Denk
f08abe311b Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h 2005-11-25 16:38:03 +01:00
wdenk
e1599e83d6 * Patch by Gridish Shlomi, 30 Aug 2004:
- Add support to revA version of PQ27 and PQ27E.
  - Reverted MPC8260ADS baudrate back to original 115200

* Patch by Hojin, 17 Sep 2004:
  Fix typo in cfi_flash.c

* Patch by Mark Jonas, 09 September 2004:
  mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
  error message

* Patch by Mark Jonas, 31 August 2004:
  Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
  improves FTP performance for MPC5200 systems. Enabled for IceCube
  by default.
2004-10-10 23:27:33 +00:00
wdenk
5c952cf024 Patches by Scott McNutt, 24 Aug 2004:
- Add support for Altera Nios-II processors.
- Add support for Psyent PCI-5441 board.
- Add support for Psyent PK1C20 board.
2004-10-10 21:27:30 +00:00
wdenk
507bbe3e80 * Patch by Yasushi Shoji, 07 Apr 2004:
- add support for microblaze processors
  - add support for AtmarkTechno "suzaku" board
2004-04-18 21:13:41 +00:00
wdenk
4a5517094d * Patch by Scott McNutt, 04 Oct 2003:
- add support for Altera Nios-32 CPU
  - add support for Nios Cyclone Development Kit (DK-1C20)

* Patch by Steven Scholz, 29 Sep 2003:
  - A second parameter for bootm overwrites the load address for
    "Standalone Application" images.
  - bootm sets environment variable "filesize" to the resulting
    (uncompressed) data length for "Standalone Application" images
    when autostart is set to "no". Now you can do something like
       if bootm $fpgadata $some_free_ram ; then
               fpga load 0 $some_free_ram $filesize
       fi

* Patch by Denis Peter, 25 Sept 2003:
  add support for the MIP405 Rev. C board
2003-10-08 23:26:14 +00:00
wdenk
ef1464cc01 * Patch by Anders Larsen, 18 Sep 2003:
allow mkimage to build and run on Cygwin-hosted systems

* Patch by Frank Müller, 18 Sep 2003:
  use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
  cpu/mpc8xx/fec.c

* Patch by Pantelis Antoniou, 16 Sep 2003:
  add tool to compute fileds in the PLPRCR register for MPC86x
2003-10-08 22:14:02 +00:00
wdenk
fbe4b5cbde * Update TRAB auto update code
* Make fatload set filesize environment variable
  fix potential buffer overlow problem

* enable basic / medium / high-end configurations for PPChameleonEVB
  board; fix NAND code

* enable TFTP client code to specify to the server the desired
  timeout value (see RFC-2349)
2003-10-06 21:55:32 +00:00
wdenk
27b207fd0a * Implement new mechanism to export U-Boot's functions to standalone
applications: instead of using (PPC-specific) system calls we now
  use a jump table; please see doc/README.standalone for details

* Patch by Dave Westwood, 24 Jul 2003:
  added support for Unity OS (a proprietary OS)
2003-07-24 23:38:38 +00:00
wdenk
8564acf936 * Patches by Yuli Barcohen, 13 Jul 2003:
- Correct flash and JFFS2 support for MPC8260ADS
  - fix PVR values and clock generation for PowerQUICC II family
    (8270/8275/8280)

* Patch by Bernhard Kuhn, 08 Jul 2003:
  - add support for M68K targets

* Patch by Ken Chou, 3 Jul:
  - Fix PCI config table for A3000
  - Fix iobase for natsemi.c
    (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)

* Allow to enable "slow" POST routines by key press on power-on
* Fix temperature dependend switching of LCD backlight on LWMON
* Tweak output format for LWMON
2003-07-14 22:13:32 +00:00
wdenk
7f70e85309 * Patch by David Updegraff, 22 Apr 2003:
update for CrayL1 board

* Patch by Pantelis Antoniou, 21 Apr 2003:
  add boot support for ARTOS (a proprietary OS)

* Patch by Steven Scholz, 11 Apr 2003:
  Add support for RTC DS1338

* Patch by Rod Boyce, 24 Jan 2003:
  Fix counting of extended partitions in diskboot command
2003-05-20 14:25:27 +00:00
wdenk
d791b1dc3e * Make sure Block Lock Bits get cleared in R360MPI flash driver
* MPC823 LCD driver: Fill color map backwards, to allow for steady
  display when Linux takes over

* Patch by Erwin Rol, 27 Feb 2003:
  Add support for RTEMS (this time for real).

* Add support for "bmp info" and "bmp display" commands to load
  bitmap images; this can be used (for example in a "preboot"
  command) to display a splash screen very quickly after poweron.

* Add support for 133 MHz clock on INCA-IP board
2003-04-20 14:04:18 +00:00
wdenk
5b1d713721 Initial revision 2002-11-03 00:07:02 +00:00