Commit graph

19 commits

Author SHA1 Message Date
Simon Glass
effcf067df x86: Add initial video device init for Intel GMA
Intel's Graphics Media Accelerator (GMA) is a generic name for a wide range
of video devices. Add code to set up the hardware on ivybridge. Part of the
init happens in native code, part of it happens in a 16-bit option ROM for
those nostalgic for the 1970s.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 07:11:16 -07:00
Simon Glass
24774278c9 x86: ivybridge: Add northbridge init functions
Add init for the northbridge, another part of the platform controller hub.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 06:34:14 -07:00
Simon Glass
bb80be3916 x86: Add init for model 206AX CPU
Add the setup code for the CPU so that it can be used at full speed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 06:34:14 -07:00
Simon Glass
a6d4c45306 x86: ivybridge: Set up XHCI USB
Add init for XHCI so that high-speed USB can be used.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 06:34:02 -07:00
Simon Glass
9baeca4b89 x86: ivybridge: Set up EHCI USB
Add init for EHCI so that USB can be used.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 06:34:01 -07:00
Simon Glass
3ac839352d x86: ivybridge: Add SATA init
Add code to set up the SATA interfaces on boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 06:34:01 -07:00
Simon Glass
72cd085aae x86: ivybridge: Add additional LPC init
Set up all the remaining pieces of the LPC (low-pin-count) peripheral in
PCH (Peripheral Controller Hub).

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 06:34:01 -07:00
Simon Glass
8c74a57318 x86: ivybridge: Add PCH init
Add required init for the Intel Platform Controller Hub in ivybridge.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 06:34:00 -07:00
Simon Glass
4e7a6acac7 x86: ivybridge: Add support for BD82x6x PCH
Add basic setup for the PCH.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 06:34:00 -07:00
Simon Glass
65dd74a674 x86: ivybridge: Implement SDRAM init
Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in
the board directory and the SDRAM SPD information in the device tree. This
also needs the Intel Management Engine (me.bin) to work. Binary blobs
everywhere: so far we have MRC, ME and microcode.

SDRAM init works by setting up various parameters and calling the MRC. This
in turn does some sort of magic to work out how much memory there is and
the timing parameters to use. It also sets up the DRAM controllers. When
the MRC returns, we use the information it provides to map out the
available memory in U-Boot.

U-Boot normally moves itself to the top of RAM. On x86 the RAM is not
generally contiguous, and anyway some RAM may be above 4GB which doesn't
work in 32-bit mode. So we relocate to the top of the largest block of
RAM we can find below 4GB. Memory above 4GB is accessible with special
functions (see physmem).

It would be possible to build U-Boot in 64-bit mode but this wouldn't
necessarily provide any more memory, since the largest block is often below
4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large
ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit
kernels directly so this does not pose a limitation in that area. Also there
are probably parts of U-Boot that will not work correctly in 64-bit mode.
The MRC is one.

There is some work remaining in this area. Since memory init is very slow
(over 500ms) it is possible to save the parameters in SPI flash to speed it
up next time. Suspend/resume support is not fully implemented, or at least
it is not efficient.

With this patch, link boots to a prompt.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:15 +01:00
Simon Glass
3eafce0527 x86: ivybridge: Add LAPIC support
The local advanced programmable interrupt controller is not used much in
U-Boot but we do need to set it up. Add basic support for this, which will
be extended as needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:15 +01:00
Simon Glass
8e0df066ff x86: ivybridge: Add early init for PCH devices
Many PCH devices are hard-coded to a particular PCI address. Set these
up early in case they are needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:14 +01:00
Simon Glass
77f9b1fb62 x86: ivybridge: Perform Intel microcode update on boot
Microcode updates are stored in the device tree. Work through these and
apply any that are needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:14 +01:00
Simon Glass
94060ff278 x86: ivybridge: Check BIST value on boot
The built-in self test value should be checked before we continue booting.
Refuse to continue if there is something wrong.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:14 +01:00
Simon Glass
f5fbbe9579 x86: ivybridge: Perform initial CPU setup
Set up the flex ratio (controls speed versus heat output) and a few other
very early things.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:13 +01:00
Simon Glass
2b6051541b x86: ivybridge: Add early LPC init so that serial works
The PCH (Platform Controller Hub) includes an LPC (Low Pin Count) device
which provides a serial port. This is accessible on Chromebooks, so enable
it early in the boot process.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:12 +01:00
Simon Glass
6e5b12b614 x86: ivybridge: Enable PCI in early init
Enable PCI so we can access devices that need to be set up before relocation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:12 +01:00
Simon Glass
70a09c6c3d x86: chromebook_link: Implement CAR support (cache as RAM)
Add support for CAR so that we have memory to use prior to DRAM init.
On link there is a total of 128KB of CAR available, although some is
used for the memory reference code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:11 +01:00
Simon Glass
8ef07571a0 x86: Add chromebook_link board
This board is a 'bare' version of the existing 'link 'board. It does not
require coreboot to run, but is intended to start directly from the reset
vector.

This initial commit has place holders for a wide range of features. These
will be added in follow-on patches and series. So far it cannot be booted
as there is no ROM image produced, but it does build without errors.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:11 +01:00