Commit graph

450 commits

Author SHA1 Message Date
Simon Glass
7b51b576d6 env: Move env_get() to env.h
Move env_get() over to the new header file.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Tom Rini
fe4243870d Pull request for UEFI sub-system for v2019.10-rc1 (2)
* Implement the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event.
 * Address errors of type -Werror=address-of-packed-member when building
   with GCC9.1
 * Fix an error when adding memory add addres 0x00000000.
 * Rework some code comments for Sphinx compliance.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl0vSQEACgkQxIHbvCwF
 GsQfxQ//d/i5Ix7V5rtm9U1ew2lkaQw5O1/E//Ta//0AeWLaEnFf0ln1Fx5jLF6E
 f70uE6iDRgnxfZWD/rnCqv7HZrokpy3GuXnUfAZTgEvsngqicw8dAAU9Ql9Q62i9
 N302GhaCGkbBp3MBOLRBXJmKuTnnzfU7jkeYo1tZbZe3AoqSNtI8ND86DHSotuUM
 9Ck5367LdcG5O86N8gIxBtCcnthq94GgS/tY69iuPhhKqN3oV6MbzjqmI4wtkVH6
 RhJSQspTsmyKTSivbcgpgIPXJJnTwh0nZcQWmzC81ehU3LF9i1M1J4SAqsZ7kpgt
 jWY959iXnd7iNfwFiCTLpf+mDrviyPzntt/aE8ras5IwbQdiwZONeQ/mhkP2Snoo
 RDX+dB3JqpyO/T+4uMdq+2saYBtKZ9CUKclqqh/xwvv5Bs63qHGC3KKYnjQx1sKA
 k5QD3XSOPDLYbqQBIcgiB9T5TWkO1igJVEWRxPtExl31DTkSXy6f7G1F7sZ+Ey+5
 gugIhNeTCme4a9bSIc7FjFaZSvPR2SNd8azUkSfso6Vqd9bNRShBF7pImlrCRmj8
 Xc0sknW824LOdeM6ZC54J7lYKyLfL3HljzYSiM7KExt21mAjNHWXt312hINr6SOA
 gz+/Osdyrv8GniP86Zw3kACto6Chaw51PEV1WReYPT3LNwinvoU=
 =aj4j
 -----END PGP SIGNATURE-----

Merge tag 'efi-2019-10-rc1-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for v2019.10-rc1 (2)

* Implement the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event.
* Address errors of type -Werror=address-of-packed-member when building
  with GCC9.1
* Fix an error when adding memory add addres 0x00000000.
* Rework some code comments for Sphinx compliance.
2019-07-23 22:29:53 -04:00
Andreas Dannenberg
a5a5d997b4 spl: Allow performing BSS init early before board_init_f()
On some platform we have sufficient memory available early on to allow
setting up and using a basic BSS prior to entering board_init_f(). Doing
so can for example be used to carry state over to board_init_r() without
having to resort to extending U-Boot's global data structure.

To support such scenarios add a Kconfig option called CONFIG_SPL_EARLY_BSS
to allow moving the initialization of BSS prior to entering board_init_f(),
if enabled. Note that using this option usually should go along with using
CONFIG_SPL_SEPARATE_BSS and configuring BSS to be located in memory
actually available prior to board_init_f().

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-17 11:12:54 -04:00
Heinrich Schuchardt
a35c33c0dc efi_loader: use predefined constants in crt0_*_efi.S
We should use predefined constants instead of magic numbers.

Move some constant definitions from include/pe.h to
include/asm-generic/pe.h.

Use these constants in crt0_*_efi.S.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16 22:17:14 +00:00
Masahiro Yamada
382de4a7e9 arm64: add an option to switch visibility of CONFIG_SYS_INIT_SP_BSS_OFFSET
By default, CONFIG_SYS_INIT_SP_BSS_OFFSET was made invisible by not
giving a prompt to it.

The only way to define it is to hard-code an extra entry in SoC/board
Kconfig, like arch/arm/mach-tegra/tegra{186,210}/Kconfig.

Add a prompt to it in order to allow defconfig files to specify the
value of CONFIG_SYS_INIT_SP_BSS_OFFSET.

With this, CONFIG_SYS_INIT_SP_BSS_OFFSET would become always visible.
So, we need a new bool option to turn it off by default.

I move the 'default 524288' to the common place. This value is not too
big, but is big enough to avoid the overwrap of DT in most platforms.
If 512KB is not a suitable choice for your platform, you can change it
from your defconfig or menuconfig etc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2019-07-10 22:37:23 +09:00
Trevor Woerner
1001502545 CONFIG_SPL_SYS_[DI]CACHE_OFF: add
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-18 08:15:35 -04:00
Christoph Fritz
02c038ddb3 arm: zimage: add barebox image magic number
For chainboot configurations or test environments, this patch allows
booting barebox images by using command bootz.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
2019-05-09 20:21:59 -04:00
Kever Yang
a0a0d04f32 arm: add a separate stack for TPL
TPL stack may different from SPL and sys stack, add support for
separate one when the board defines it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:12 +08:00
Kever Yang
dc23c27aa5 arm: remove ARCH_ROCKCHIP macro in common code
This is fix to:
e2a12f590d rockchip: use 'arch-rockchip' as header file path

The V2 of origin patch set has fix this, but we merge V1 by
mistake, so lets correct it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:12 +08:00
Kever Yang
6916dad511 rockchip: arm: use 'arch-rockchip' for common header
rockchip platform header file is in 'arch-rockchip'
instead of arch-$(SOC) for all SoCs.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 00:00:05 +02:00
Ibai Erkiaga
98ffbb78e1 arm: arm64 32bit address relocation
Current relocation code is limited to 21bit PC-relative addressing
which might not be enough for bigger code sizes. The following patch
increases the addressing to 32bit PC-relative. This feature is
specially interesting if U-Boot is build without optimiation (-O0) as
the text section is increased significativelly.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
2019-04-22 18:13:24 -04:00
Heinrich Schuchardt
bba8165690 arm: print information about loaded UEFI images
If an exception occurs in a UEFI loaded image we need the start address of
the image to determine the relocation offset.

This patch adds the necessary lines after the registers in the crash dump
for armv8. A possible output would be:

UEFI image [0x00000000bffe6000:0x00000000bffe631f] pc=0x138 '/\snp.efi'

With the offset 0x138 we can now find the relevant instruction in the
disassembled 'snp.efi' binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-12 22:00:42 +02:00
Keerthy
6dad56d733 arm: lib: bootm: Push the Starting kernel print to the end
Push the Starting kernel print to the end just before the
dm_remove_devices call.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-22 08:35:50 -04:00
Marek Vasut
86dc480d73 ARM: cache: Fix incorrect bitwise operation
The loop implemented in the code is supposed to check whether the
PL310 operation register has any bit from the mask set. Currently,
the code checks whether the PL310 operation register has any bit
set AND whether the mask is non-zero, which is incorrect. Fix the
conditional.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dalon Westergreen <dwesterg@gmail.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Tom Rini <trini@konsulko.com>
Fixes: 93bc21930a ("armv7: add PL310 support to u-boot")
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2019-02-28 14:21:46 -05:00
Meenakshi Aggarwal
b3b7706b2f arch: arm: lib: Flush L3 after relocation to DDR
Flush L3 cache after uboot relocated to DDR.

Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19 10:26:43 +05:30
Heinrich Schuchardt
e4fd695645 efi_selftest: allow building on ARMv7-M
ARMv7-M only supports the Thumb instruction set. Our current crt0 code does
not support it. With the patch we can build all unit tests of the EFI
subsystem that do not require crt0.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2019-02-13 09:40:05 +01:00
Simon Goldschmidt
f8878da557 arm: bootm: fix sp detection at end of address range
This fixes  'arch_lmb_reserve()' for ARM that tries to detect in which
DRAM bank 'sp' is in.

This code failed if a bank was at the end of physical address range
(i.e. size + length overflowed to 0).

To fix this, calculate 'bank_end' as 'size + length - 1' so that such
banks end at 0xffffffff, not 0.

Fixes: 15751403b6 ("ARM: bootm: don't assume sp is in DRAM bank 0")
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2019-01-16 23:16:25 -05:00
Bin Meng
fb8ebf52a4 arm: efi: Generate Microsoft PE format compliant images
Per Microsoft PE Format documentation [1], PointerToSymbolTable and
NumberOfSymbols should be zero for an image in the COFF file header.
Currently the COFF file header is hardcoded on ARM and these two
members are not zero.

This updates the hardcoded structure to clear these two members, as
well as setting the flag IMAGE_FILE_LOCAL_SYMS_STRIPPED so that we
can generate compliant *.efi images.

[1] https://docs.microsoft.com/zh-cn/windows/desktop/Debug/pe-format

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:36 +01:00
Klaus Goger
ba08afe837 arm: Make arch specific memcpy thumb-safe.
The current arch implementation of memcpy cannot be called
from thumb code, because it does not use bx instructions on return.
This patch addresses that. Note, that this patch does not touch
the hot loop of memcpy, so performance is not affected.

Tested on MXS (arm926ejs) with and without thumb-mode enabled.

Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
2018-11-16 16:51:57 -05:00
Tom Rini
e3beca3a2f Patch queue for efi - 2018-10-17
A few bug fixes for the 2018.11 release:
 
   - Fix block seeking on 32bit
   - Fix execution with DEBUG set
   - Fix a few Coverity found bugs
   - Fix warnings
 
 Heinrich Schuchardt (13):
       efi_loader: fix relocation on x86_64
       efi_loader: correct signature of GetPosition, SetPosition
       efi_loader: execute efi_save_gd() first
       efi_loader: efi_allocate_pool(EFI_ALLOCATE_ANY_PAGES, ...)
       efi_loader: error handling in read_console()
       efi_loader: return type efi_console_register()
       efi_loader: superfluous statement in is_dir()
       efi_loader: memory leak in efi_set_variable()
       efi_loader: remove lcd.h from efi_net.c
       arm: do not include efi_loader.h twice
       efi_loader: fix typo in efi_boottime.c
       efi_selftest: creating new handle in controller test
       efi_loader: efi_dp_get_next_instance() superfluous statement
 
 Tom Rini (2):
       efi_loader: Fix warning in efi_load_image()
       fs: fat: Fix warning in normalize_longname()
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJbxuNeAAoJECszeR4D/txgI0gP/j26hOIDGYqrzm043Y8eA21b
 +R5TkqgvrNF8eu0Zfgl2Wf9WqqYuTDaNVFbyOQDmppb9brhqeKtsimBNFJhWNa42
 5hoEh8lWuOU3rTpvF2PQikNMwTjtVuOyf09UdBrmCYf2QB5s3UznyKLqzKTSvqYS
 zmwptfgpCIPhXfAxfPb9UmVpFrmnTaVuDDOmtDlSW8PdggI8EEASS7KTYRR1oJ3w
 nBybxnyCIJY71t7Rttf5zjDvr2avXzliEUe5PaWekjKab5IUr2V6C2Eeq+zWfKn4
 xTYXdzpcVpJKJ+PMWFot0gr46SizqwytWC0vYmlKjXT8ZJvkxhFkdFPSwJa+ihZC
 WKDQwF20VZBL46HOPJ1AvEp8G3weMGONgyYoiy8uyHXkxYxKDGAs8qBo2qM+vZEb
 dg/DBk5u9z+deJQn3SW7QwF8AuIWLhpXrXQRQ35ZhGwJck9I34Bxdm/s667J0J57
 fEU6s4r41ZT7X4V9CEjSRh5UTv1N3acA0Y5GUMUpEf4zrocRn1XpOMZRVF9s0lqs
 gZJdZ44hSRn0RxrzdyUim239nEU2iPZoCB3xggSBCyUxPtZJnOIKkTEtXGs4KEW3
 Cvuc4EXS6jfIhqInuAEThFTk/rhHLpbfXd4fGA6cN/Q18Ad0txSqEs09lNXilrgq
 VW7JkaqIsvSjwkuPgO0B
 =CIpq
 -----END PGP SIGNATURE-----

Merge tag 'signed-efi-2018.11' of git://github.com/agraf/u-boot

Patch queue for efi - 2018-10-17

A few bug fixes for the 2018.11 release:

  - Fix block seeking on 32bit
  - Fix execution with DEBUG set
  - Fix a few Coverity found bugs
  - Fix warnings

Heinrich Schuchardt (13):
      efi_loader: fix relocation on x86_64
      efi_loader: correct signature of GetPosition, SetPosition
      efi_loader: execute efi_save_gd() first
      efi_loader: efi_allocate_pool(EFI_ALLOCATE_ANY_PAGES, ...)
      efi_loader: error handling in read_console()
      efi_loader: return type efi_console_register()
      efi_loader: superfluous statement in is_dir()
      efi_loader: memory leak in efi_set_variable()
      efi_loader: remove lcd.h from efi_net.c
      arm: do not include efi_loader.h twice
      efi_loader: fix typo in efi_boottime.c
      efi_selftest: creating new handle in controller test
      efi_loader: efi_dp_get_next_instance() superfluous statement

Tom Rini (2):
      efi_loader: Fix warning in efi_load_image()
      fs: fat: Fix warning in normalize_longname()
2018-10-17 07:20:52 -04:00
Heinrich Schuchardt
b417d475b2 arm: do not include efi_loader.h twice
We should not include the same include twice.

Fixes: 99b8db7291 ("arm: print information about loaded UEFI images")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16 16:41:01 +02:00
Michal Simek
e6149576e8 arm64: gic: Do gicv3 secure initialization based on EL level
Do gic cpu initialization based on EL level which u-boot enters.
U-Boot can't access EL3 regs when runs in EL2/EL1, etc.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16 14:58:46 +02:00
Lokesh Vutla
f70b72e353 arm: K3: Update _start instruction
On K3 family SoCs, once the ROM loads image on R5, M3 resets R5 and
expects to start executing from 0x0. In order to handle this ROM
updates the boot vector of R5 such that first 64 bytes of image load
address are mapped to 0x0.

In this case, it is SPL's responsibility to jump to the proper image
location. So, update the PC with address of reset vector(like how
other exception vectors are handled), instead of branching to reset.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-09-11 08:32:55 -04:00
Vikas Manocha
d22336aad9 arm: armv7m: clean up armv7m unified code compilation
unified syntax should be selected by config ARM_ASM_UNIFIED

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2018-09-10 21:19:33 -04:00
Vikas Manocha
680223a2da arm: armv7m: remove un-necessary If then instruction
With gas option -mimplicit-it=always, IT block is inserted by the assembler
for thumb2.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2018-09-10 21:19:33 -04:00
Stephen Warren
74c69cdcc0 ARM: PSCI: Enable the PSCI node
When fixing up the DT to report PSCI support, explicitly enable the node.
DTs may ship with the node disabled in case a PSCI implementation is not
present, and expect any PSCI implementation to enable the node if they are
actually present.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-07-26 13:15:30 -07:00
Stephen Warren
326bd726d0 ARM: PSCI: Support PSCI v0.2
Enhance the PSCI DT editing code to allow setting a PSCI v0.2 compatible
value in the DT. The CONFIG_ option is added to the whitelist to match the
existing PSCI_1_0 option. While not adding new options to Kconfig isn't
ideal, I figure it's better to keep related options together.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-07-26 13:15:30 -07:00
Ivan Gorinov
b966e5dc54 arm: Remove unused _relocate arguments
EFI image handle and system table are not used in _relocate().

Signed-off-by: Ivan Gorinov <ivan.gorinov@intel.com>
2018-07-19 16:31:36 -04:00
Marek Vasut
7f13b374fd ARM: image: Add option for ignoring ep bit 3
Add option to the booti_setup() which indicates to it that the caller
requires the image to be relocated to the beginning of the RAM and
that the information whether the image can be located anywhere in RAM
at 2 MiB aligned boundary or not is to be ignored. This is useful ie.
in case the Image is wrapped in another envelope, ie. fitImage and not
relocating it but moving it would corrupt the envelope.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Bin Chen <bin.chen@linaro.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-By: Bin Chen <bin.chen@linaro.org>
2018-06-19 07:31:45 -04:00
Andrew F. Davis
a1b73c1872 arm: Do not clear LR on exception in SPL
When an exception or interrupt occurs the link register (LR) may
contain the source of the exception, although we do not print the
value it may still be extracted with a debugger. When in SPL we
loop on getting and exception, but use a linking branch, which
over-writes the LR value, use a regular branch instruction here.

Signed-off-by: Andrew F. Davis <afd@ti.com>
2018-06-18 14:43:13 -04:00
Heinrich Schuchardt
bd2a13f329 arm: print instructions pointed to by pc
If an exception occurs in a loaded image and the relocation offset is
unknown, it is helful to know the instructions pointed to by the
program counter. This patch adds the missing output.

A possible output is:
    Code: e1c560d0 e12fff1e e120077b e12fff1e (e7f7defb)

The parentheses indicate the instruction causing the exception.

The output can be disassembled using the decodecode script provided
by the Linux kernel project.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-05-23 22:06:41 -04:00
Hannes Schmelzer
7f1cb1d588 bootm: fix 'memory-fixup' for vxWorks boot
The check for having a memory node within the fdt blob is made wrong, we
fix this here.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2018-05-10 20:38:34 -04:00
Lokesh Vutla
a43d46a73c arm: v7R: Add support for enabling caches
Cache maintenance procedure is same for v7A and v7R
processors. So re-use cache-cp15.c file except for
mmu parts.

Tested-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-07 15:53:29 -04:00
Lokesh Vutla
f4bcd767bd arm: v7: Kconfig: Introduce SYS_ARM_CACHE_CP15
Certain ARM architectures like ARMv7-A, ARMv7-R has support for
enabling caches using CP15 registers. To have a common support
for all these architectures, introduce a Kconfig symbol
SYS_ARM_CACHE_CP15 that selects cache-cp15.c

Tested-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-05-07 15:53:28 -04:00
Lokesh Vutla
acf1500138 arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A
Currently CPU_V7 kconfig symbol supports only ARMv7A architectures under
armv7 folder. This led to a misconception of creating separate folders
for armv7m and armv7r. There is no reason to create separate folder for
other armv7 based architectures when it can co-exist with few Kconfig
symbols.

As a first step towards a common folder, rename CPU_V7 as CPUV7A. Later
separate Kconfig symbols can be added for CPU_V7R and CPU_V7M and
can co exist in the same folder.

Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Suggested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-05-07 15:53:24 -04:00
Tom Rini
4549e789c1 SPDX: Convert all of our multiple license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have multiple licenses (in
these cases, dual license) declared in the SPDX-License-Identifier tag.
In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A
or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B"
as per the Linux Kernel style document.  Note that parenthesis are
allowed so when they were used before we continue to use them.

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 10:24:31 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Tom Rini
d024236e5a Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27 14:54:48 -04:00
Vasyl Vavrychuk
3194daa10b vxworks: fixed cpu enable using PSCI on armv8
Without armv8_setup_psci register VBAR_EL3 is not set up property which
makes SMC calls jump to invalid location.

smp_kick_all_cpus is required to make slave cpus leave gic_wait_for_interrupt.
Without this they will never pursue booting process.

Fix was applied to the two ways of booting VxWorks: bootvx and bootm commands.

This implementation is very similar to what is done in boot_jump_linux
in arch/arm/lib/bootm.c file.

Tested on VxWorks 7 release SR0520 2017-12-08 Intel Stratix 10 SX SoC
Development Kit board.

Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@globallogic.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-04-13 17:06:05 -04:00
Marek Vasut
a821a77aa7 ARM: Fix Makefile during SPL and TPL build
The tiny variants of memset and memcpy implementations can be
built for TPL as well, check whether a TPL build is in progress
and avoid including the default variants.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2018-04-11 13:22:06 -04:00
Heinrich Schuchardt
99b8db7291 arm: print information about loaded UEFI images
If an exception occurs in a UEFI loaded image we need the start address of
the image to determine the relocation offset.

This patch adds the necessary lines after the registers in the crash dump.
A possible output would be:

UEFI image [0xbffe6000:0xbffe631f] pc=0x138 '/\snp.efi'

With the offset 0x138 we can now find the relevant instruction in the
disassembled 'snp.efi' binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-05 15:24:01 +02:00
Masahiro Yamada
b08c8c4870 libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>
Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
  include/libfdt.h         -> include/linux/libfdt.h
  include/libfdt_env.h     -> include/linux/libfdt_env.h

and replaces include directives:
  #include <libfdt.h>      -> #include <linux/libfdt.h>
  #include <libfdt_env.h>  -> #include <linux/libfdt_env.h>

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05 10:16:28 -05:00
Karl Beldan
fa7b8eae7c arm64: show_regs: Dump the LRs HW values
These were dropped in [1], after relocation, for their values offset by
reloc_off.
Unconditionally show the HW values and add a '(reloc)' hint for the
offset values showed after relocation.
Also, the LRs' dumps are now formatted the same way the other regs' are.

[1] Commit 082693f4 ("arm64 :show_regs: show the address before relocation")

Signed-off-by: Karl Beldan <karl.beldan+oss@gmail.com>
2018-02-23 10:40:51 -05:00
Andre Heider
678382c73a arm/PSCI: support PSCI versions greater than 1.0
ATF recently began announcing PSCI v1.1. Since that version is unknown
to u-boot, the PSCI device nodes were not updated.

Switch from the case statement to a greater/less-than comparison so that
v1.1, as well as future versions, get at least the compatible nodes of
known versions.

PSCI v1.1 doesn't seem to have introduced a new corresponding compatible.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2018-02-14 12:14:15 -05:00
Masahiro Yamada
6becd9de6b ARM: image: indent with tab instead of 4 spaces
Commit 6808ef9ac2 ("move booti_setup to arch/arm/lig/image.c")
not only moved the code, but also replaced a tab with 4 spaces
to break the Linux coding style.

Restore tab indentation.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Bin Chen <bin.chen@linaro.org>
2018-02-13 23:24:22 -05:00
Heinrich Schuchardt
268ec6e00e efi_loader: fix building crt0 on arm
Before the patch an undefined constant EFI_SUBSYSTEM was used in the
crt0 code. The current version of binutils does not swallow the error.

https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=888403

The necessary constant IMAGE_SUBSYSTEM_EFI_APPLICATION is already
defined in pe.h. So let's factor out asm-generic/pe.h for the
image subsystem constants and use it in our assembler code.

IMAGE_SUBSYSTEM_SAL_RUNTIME_DRIVER does not exist in the specification
let's use IMAGE_SUBSYSTEM_EFI_ROM instead.

The include pe.h is only used in code maintained by Alex so let him be the
maintainer here too.

Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10 00:24:00 +01:00
Bin Chen
6808ef9ac2 move booti_setup to arch/arm/lig/image.c
Follow bootz's pattern by moving the booti_setup to arch/arm/lib.
This allows to use booti_setup in other paths, e.g booting
an Android image containing Image format.

Note that kernel relocation is move out of booti_setup and it is the
caller's responsibility to do it and allows them do it differently. say,
cmd/booti.c just do a manually, while in the bootm path, we can use
bootm_load_os(with some changes).

Signed-off-by: Bin Chen <bin.chen@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-02-07 22:06:11 -05:00
Heiko Schocher
020da843fc arm: bootm-fdt.c: fix compiler warning
compiling U-Boot with bosch_mpcxxxxd_sd_defconfig
drops warning:

arch/arm/lib/bootm-fdt.c: In function ‘arch_fixup_fdt’:
arch/arm/lib/bootm-fdt.c:37:6: warning: unused variable ‘ret’ [-Wunused-variable]
  int ret = 0;
      ^~~

Fix it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2018-01-28 09:39:05 -05:00
Heinrich Schuchardt
8218f7b5fc efi_selftest: test start image
This pair of tests checks the StartImage boot service.

Each test loads an EFI application into memory and starts it.
One returns by calling the Exit boot service. The other returns directly.

The tests are not built on x86_64 because the relocation code for the efi
binary cannot be created.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22 23:09:14 +01:00
Stephen Warren
15751403b6 ARM: bootm: don't assume sp is in DRAM bank 0
arch_lmb_reserve() currently assumes that the stack pointer is within DRAM
bank 0. This is not necessarily true. Enhance the code to search through
DRAM banks until the bank that does contain SP is found, and then reserve
the tail of that bank.

Fixes: 2d1916e48b ("ARM: add flat device tree support")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-01-12 10:12:31 -07:00