Commit graph

85220 commits

Author SHA1 Message Date
Hai Pham
72eb1f5e19 ARM: renesas: falcon: Initialize ARM generic timer and GICv3 if EL3
U-Boot executes at EL3 is required to initalize those settings.
In other cases, they will be done by prior-stage firmware instead.

This fixes crash when U-Boot is at non-secure exception level.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-18 11:59:45 +01:00
Marek Vasut
143bd4e315 ARM: renesas: Enable DTO support by default on R-Car Gen3
All R-Car Gen3 defconfigs present in U-Boot do enable DTO support,
enable it for all of R-Car Gen3 by default in Kconfig instead, so
that no new boards would miss this functionality.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-18 11:59:45 +01:00
Hai Pham
ca9299747f ARM: renesas: Demote overlap memory nodes message to debug on Gen3
The R-Car DTs might contains multiple /memory@* nodes from various
sources, i.e. prior firmware, u-boot itself or the OS

The duplicates are likely to happen so the messages are not meaningful
in the default setting since we have already handled that.

Reduce the message to debug level.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-18 11:59:45 +01:00
Hai Pham
74fad8bd2d ARM: renesas: Remove defines for USB on Eagle/Condor
The Eagle board based on R-Car V3M, which does not support any USB
interfaces. The same applies for the Condor board based on R-Car V3H.

Remove the defines.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-18 11:59:45 +01:00
Tom Rini
cefd0449d6 Xilinx changes for v2023.07-rc1
cmd:
 - Print results in hex instead of dec in smc command
 
 firmware:
 - Cover missing ZYNQMP_FIRMWARE dependencies
 
 fpga:
 - fix loads for unencrypted use case
 
 relocation
 - Add support for BE systems
 
 spi:
 - Fix xilinx_spi init reset sequence
 
 arasan nand:
 - Remove hardcoded bbt option
 - Set ofnode value
 
 xilinx:
 - Enable SMC command
 - Fix some sparse issues
 
 zynqmp:
 - Remove cdns,zynq-gem compatible string
 - Add optee node
 - Some DT cleanups
 
 zynq:
 - Some DT cleanups
 
 microblaze
 - Remove MANUAL_RELOC option
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZBHCfAAKCRDKSWXLKUoM
 ITcJAKCF8qmG8QPZptsoMj4dcceoaSJnyACfSGgH4ytUY8QkP8Yp0Z5U8HoY6a8=
 =eAAF
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2023.07-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2023.07-rc1

cmd:
- Print results in hex instead of dec in smc command

firmware:
- Cover missing ZYNQMP_FIRMWARE dependencies

fpga:
- fix loads for unencrypted use case

relocation
- Add support for BE systems

spi:
- Fix xilinx_spi init reset sequence

arasan nand:
- Remove hardcoded bbt option
- Set ofnode value

xilinx:
- Enable SMC command
- Fix some sparse issues

zynqmp:
- Remove cdns,zynq-gem compatible string
- Add optee node
- Some DT cleanups

zynq:
- Some DT cleanups

microblaze
- Remove MANUAL_RELOC option
2023-03-16 12:18:30 -04:00
Tom Rini
e63828bf35 Merge tag 'fsl-qoriq-next-2023-3-14' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next
Enable DM_SERIAL for freescale ls2080a
Drop non DM_ETH code for freescale:
  lx2160a/ls2080rdb/ls2080aqds/ls1088a
2023-03-16 12:17:48 -04:00
Tom Rini
f6546c7822 Revert 9f62a472df ("video: Remove duplicate cursor-positioning function")
This reverts commit 9f62a472df.

The changes here aren't quite right, and on platforms such as Raspberry
Pi where we can have both serial and video output, the change above
causes output to change. This can be seen as the hush tests we have now
fail.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-16 12:17:02 -04:00
Tom Rini
cb90ddb2a6 More tests and fixes for fdt command
binman signing feature
 fix buildman -A bug introduced recently
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmQQ8KIRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreYRmwgA1XAHafEOfhaya54nalUgW9qYZe5Ntfqd
 4Tg7zj3gadZuv82LuyskEyBKptwRCzgX0Tyx62V3Oop9vJ/cCwjIB4AGhCsMKERf
 NqcMd8fbGbJ9jJzOp7gNTHzV4vSmwKM0lRkxbClMFcvMsfVdKcBRPswLLghk5/xL
 Uu4Ww4yfe7UCqgBm9uouVaIbcNNcl8p0QnSJT9HvwjGKawPT6uSHOHK9Wpkud0q1
 ZyrPpCMA29mifhIU8aH5CJH5G61UbGcVSDhm9lIKwqZg+KJGuYf64JbZoY9JI2/z
 pOUHLZx7fVHoFyWKWfVkA9l6HRjZTRc0nJhYFx5HyNUOU50hMENeTQ==
 =ko2P
 -----END PGP SIGNATURE-----

Merge tag 'dm-next-12mar23a' of git://git.denx.de/u-boot-dm into next

More tests and fixes for fdt command
binman signing feature
fix buildman -A bug introduced recently

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-16 12:16:14 -04:00
Simon Glass
c3cea95fd2 buildman: Fix CROSS_COMPILE output for sandbox
The previous attempt at fixing this broke the normal usage of the -A
flag.

At present, 'buildman -A sandbox' adds the path containing the
toolchain. We can assume that this is in the path and we don't want to
set CROSS_COMPILE=/bin/

Change this to align with what MakeEnvironment() does, but only for
sandbox boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-14 16:08:52 -06:00
Simon Glass
2dbfcf439a Revert "buildman: Correct CROSS_COMPILE output for sandbox"
This reverts commit bd0a548ad4.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-14 16:08:52 -06:00
Roman Kopytin
30238e9961 tools: add fdt_add_pubkey
Having to use the -K option to mkimage to populate U-Boot's .dtb with the
public key while signing the kernel FIT image is often a little
awkward. In particular, when using a meta-build system such as
bitbake/Yocto, having the tasks of the kernel and U-Boot recipes
intertwined, modifying deployed artifacts and rebuilding U-Boot with
an updated .dtb is quite cumbersome. Also, in some scenarios one may
wish to build U-Boot complete with the public key(s) embedded in the
.dtb without the corresponding private keys being present on the same
build host.

So this adds a simple tool that allows one to disentangle the kernel
and U-Boot builds, by simply copy-pasting just enough of the mkimage
code to allow one to add a public key to a .dtb. When using mkimage,
some of the information is taken from the .its used to build the
kernel (algorithm and key name), so that of course needs to be
supplied on the command line.

Signed-off-by: Roman Kopytin <Roman.Kopytin@kaspersky.com>
Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2023-03-14 16:08:52 -06:00
Ivan Mikhaylov
5b34efe865 binman: add tests for sign option
Add the test which provides sequence of actions:
  1. create the image from binman dts
  2. create public and private keys
  3. add public key into dtb with fdt_add_pubkey
  4. 1. sign FIT container with new sign option with extracting from
        image
     2. sign exact FIT container with replacing of it in image
  5. check with fit_check_sign

Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
Renumber test file from 277 to 280;
   Move UpdateSignatures() to Entry base class;
   Don't allow missing mkimage as it doesn't make sense;
   Propagate --toolpath for CI;
   Call mark_build_done() to avoid regenerating FIT:
Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-14 16:08:52 -06:00
Ivan Mikhaylov
4023dc9c95 binman: add sign option for binman
Introduce proof of concept for binman's new option which provides sign
and replace FIT containers in binary images.

Usage as example:

from:
mkimage -G privateky -r -o sha256,rsa4096 -F fit
binman replace -i flash.bin -f fit.fit fit

to:
binman sign -i flash.bin -k privatekey -a sha256,rsa4096 -f fit.fit fit

and to this one if it's need to be extracted, signed with key and put it
back in image:
binman sign -i flash.bin -k privatekey -a sha256,rsa4096 fit

Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
2023-03-14 16:08:51 -06:00
Ivan Mikhaylov
0f40e23fd2 binman: add documentation for binman sign option
Add the documentation about binman sign option and providing an
example.

Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
Add a section about 'binman sign' at the bottom:
Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-14 16:08:51 -06:00
Marek Vasut
c5fe73ecb4 test: cmd: fdt: Test fdt apply
Add 'fdt chosen' test which works as follows:
- Create basic DT, map it to sysmem
- Apply DTO which adds single property via fragment (without address spec)
- Apply DTO which adds more properties (string, u32, empty) and a subnode,
  with phandle via frament@0 and thus tests /__symbols__ node
- Apply DTO which modifies property of the previous DTO via phandle and thus
  tests the /__fixups__ node
- Print modified DT, verify it contains updates from DTOs

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-14 16:08:51 -06:00
Marek Vasut
77291e6e90 test: cmd: fdt: Test fdt chosen
Add 'fdt chosen' test which works as follows:
- Create basic DT, map it to sysmem
- Print /chosen node, verify it is nonexistent
- Create chosen node
- Print /chosen node, verify it contains only version
- Create /chosen node with initrd entries
- Print /chosen node, verify it contains version and initrd entries

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-14 16:08:51 -06:00
Marek Vasut
50daa2e615 test: cmd: fdt: Test fdt rsvmem
Add 'fdt rsvmem' test which works as follows:
- Create custom FDT with single reserved memory (rsvmem) entry, map it to sysmem
- Add new rsvmem entry
- Delete existing older rsvmem entry
- Add new rsvmem entry again
- Always print the rsvmem list and validate it

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-14 16:08:51 -06:00
Marek Vasut
d9b4c9fc94 test: cmd: fdt: Test fdt memory
Add 'fdt memory' test which works as follows:
- Create custom FDT with /memory node, with select #*cells, map it to sysmem
- Perform memory fixup
- Read back the /memory node and validate its content

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-14 16:08:51 -06:00
Marek Vasut
927e03b4f6 test: cmd: fdt: Test fdt header
Add 'fdt header' test which works as follows:
- Create basic FDT, map it to sysmem
- Print the FDT header
- Get all members of the FDT header into variable and
  verify the variables contain correct data

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Merged in test: cmd: fdt: Drop unused fdt_test_header_get() fdt parameter:
Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-14 16:08:51 -06:00
Marek Vasut
b0cd7ccebd test: cmd: fdt: Test fdt print and list
Add 'fdt print' and 'fdt list' test which works as follows:
- Create fuller FDT, map it to sysmem
- Print the entire FDT, parts of the FDT and select properties
- Compare output from the print or list

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-14 16:08:51 -06:00
Marek Vasut
ed4dcb1f9b cmd: fdt: Drop the 0x prefix
The 'fdt get addr' is always assumed to be hex value, drop the prefix.
Since this might break existing users who depend on the existing
behavior with 0x prefix, this is a separate patch. Revert if this
breaks anything.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-14 16:08:51 -06:00
Marek Vasut
97d6d7e360 console: Use only 0x00 as line separator for console recording
In case character 0x20 (space) is used as line separator,
character 0x9 (tab) is treated end of line. Commands which
output a lot of tabs, i.e. various tree printing commands
like 'fdt print' then end up generating a lot of newlines
in the recorded output, and the recorded output is corrupted.

Use character 0x00 (NUL) as separator instead to treat the
tabs as valid part of recorded line.

Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-14 16:08:51 -06:00
Marek Vasut
a96dea2569 test: cmd: fdt: Drop new unneeded curly brackets
Drop no longer needed { } around ut_assert*() functions in FDT test.
No functional change.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-14 16:08:51 -06:00
Marek Vasut
fa847bb409 test: Wrap assert macros in ({ ... }) and fix missing semicolons
Wrap the assert macros in ({ ... }) so they can be safely used both as
right side argument as well as in conditionals without curly brackets
around them. In the process, find a bunch of missing semicolons, fix
them.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-14 16:08:51 -06:00
Tom Rini
a5faa4a9eb Prepare v2023.04-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmQPxXsACgkQFHw5/5Y0
 tyzRWgwAlpwF0u0Xtfs+isnwy/2wb1uMKSeZTiMWkP8he48DX/+db1LHyxnb5apX
 5ULLLKnxZGDviFNw6F/Vuq/BlL8aK+K6wJm+HxdN4Df+sQZgP0kZVnZH1DcDGyJ7
 2I5mYxXCQiRfl3lG8uHdfQyGT5BOm1ZYTIBgXPzpdp/PS6Es74aIHfHS4UdsnpZ2
 dw5APUHnXsSeycbvgiZZEAQphRGplTgSmEDLZTCHD6+oIFoyJVMRr4QWc+KjYPR8
 MgfykqaITO7xKg1V2GwEWJA7LpU4L3HrK+8upSjdx0kfKw4jZoBTU5LE3dnk+6fz
 rgisMfyDGZ+w467uk9BSAO9smRRRI7GFMSkvi+kMQtVCFWCSaddkfYPlpFu1PND7
 nHfxkzoIjxeEOG8yIFF8P199w2lEorKTxlXuNBStfozvAz1wfhgq3o3WQGpvDmqF
 E+FoC7t73qVu6DVMiCXCOyUYNyI7d1tFlUhlbZPVCelVL8RX3JjMF/0uhLsOSDMc
 s4z/6fVq
 =xK+J
 -----END PGP SIGNATURE-----

Merge tag 'v2023.04-rc4' into next

Prepare v2023.04-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-14 12:06:35 -04:00
Tom Rini
20aaff677d Merge branch '2023-03-14-revert-two-TI-patches' into next
Per request of the author, these two patches weren't quite ready to be
applied yet, so revert them.
2023-03-14 10:53:50 -04:00
Tom Rini
c4e4fd2916 Revert "configs: j721s2: merge HS and non-HS defconfigs"
This reverts commit c714045cc3.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-14 10:53:44 -04:00
Tom Rini
db160b47d8 Revert "configs: j7200: Merge HS and non-HS defconfigs"
This reverts commit e352e1061f.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-14 10:53:38 -04:00
Ioana Ciornei
b07a62c021 configs: ls208x: enable DM_SERIAL
Now that the DT nodes for the serial devices are in place for these
boards, enable DM_SERIAL in the associated configs.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-03-14 18:56:28 +08:00
Ioana Ciornei
5a2416fd99 arch: arm: dst: fsl-ls2080a.dts: tag serial nodes with bootph-all
Tag the serial nodes with bootph-all in order to have these nodes and
the drivers available before relocation.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-03-14 18:56:28 +08:00
Ioana Ciornei
1d37e4a18b arch: arm: dst: fsl-ls2080a.dts: sync serial nodes with Linux
Sync the serial nodes of the LS208XA RDB/QDS boards with their
representation in Linux. We also imported the clockgen and sysclk nodes
which are dependencies.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-03-14 18:56:28 +08:00
Ioana Ciornei
853c3124cd arch: arm: dst: fsl-ls2080a.dtsi: move the serial nodes under soc
Move the serial nodes under the soc node. No changes are made to the
nodes, just their location is changed.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-03-14 18:56:28 +08:00
Ioana Ciornei
c445af6d23 arch: arm: dst: fsl-ls2080a.dtsi: add an 'soc' node
The u-boot dts for these boards do not have an soc node, unlike its
Linux counterpart. This patch just adds the soc node as seen in Linux,
the next patches will move some nodes under it.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-03-14 18:56:28 +08:00
Ioana Ciornei
73ba0371a1 arm: dts: ls1088a-rdb: replace 'xgmii' with '10gbase-r'
When the first device tree description was added for the ethernet nodes,
the 2 10G ports on the LS1088ARDB were wrongly described as 'xgmii'.

Fix this by replacing the two last occurrences of 'xgmii' in the device
trees of the Layerscape DPAA2 devices.

Fixes: 68c7c008e8 ("arm: dts: ls1088ardb: add DPMAC and PHY nodes")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-03-14 18:56:27 +08:00
Ioana Ciornei
a33b8baf20 board: freescale: ls1088a: remove code under !CONFIG_DM_ETH
Now that DM_ETH is enabled by default, there is no point in keeping the
non-DM_ETH code which initialized the ethernet interfaces.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-03-14 18:56:27 +08:00
Ioana Ciornei
6bd026d7f7 board: freescale: ls2080aqds: remove code under !CONFIG_DM_ETH
Now that DM_ETH is enabled by default, there is no point in keeping the
non-DM_ETH code which initialized the ethernet interfaces.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-03-14 18:56:27 +08:00
Ioana Ciornei
c45e8fe3bf board: freescale: ls2080rdb: remove code under !CONFIG_DM_ETH
Now that DM_ETH is enabled by default, there is no point in keeping the
non-DM_ETH code which initialized the ethernet interfaces.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-03-14 18:56:27 +08:00
Ioana Ciornei
6419072880 board: freescale: lx2160a: remove code under !CONFIG_DM_ETH
Now that DM_ETH is enabled by default, there is no point in keeping the
non-DM_ETH code which initialized the ethernet interfaces.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-03-14 18:56:27 +08:00
Ioana Ciornei
e083a47297 board: freescale: lx2160a: remove hardcoded ethernet initialization
The LX2160ARDB board has support for DM_ETH probed devices, which means
that we do not need to manually create an MDIO controller, register it,
create PHYs on it etc.

In order to cleanup the board file a bit, just remove this code entirely.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-03-14 18:56:27 +08:00
Tom Rini
88e08fc5f6 Prepare v2023.04-rc4
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-13 20:52:48 -04:00
Tom Rini
2684aad483 Pull request efi-next-20230313
UEFI:
 
 * Improve graphics support in EFI app
 
 Others:
 
 * x86: Add a few more items to bdinfo
 * video: Remove duplicate cursor-positioning function
 * video: Clear the vidconsole rather than the video
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmQPNQsACgkQxIHbvCwF
 GsTDcQ//V1UUQWmZGgWtref6cbG6RlVV4SZjvaVosfWazQY8fK3TC5LEV6dXjs2L
 gJZpHBAU8unCwsnQueYy2HumgEb/9ruyTVLCeO7s7Mqc7jBrHVEaFQf7E+FxAPOg
 ibQ5bx5MI36KaqcQ7fZmQtEIOvOIJXkxbdrlFPh/b3oE08GzVDnkryLXC9xykW2Z
 Y4HJxNhchz2labGuTInuGnst6qnhy3Oo8WHUSBdOJW04Dd0GVLyY11qjBsy4lttt
 uDmb48WouTfLBz6JquDZX9EY97KZA0ThVu6GDAr2BNqVmF/f0/Js5+5KdKYSBy44
 jYR8MTG+BOQ2luIwy+YvLKcANOMYXB2HeN5pIemUOkrJA9cEAv4ru1yPR7fp4sse
 2u+XZ7P9BosCyOpTErH4GMIdz4kYsT9lhiusVD2QyBgSco6vTD+7atRwH1pEptoS
 Hthqn5dnlQvGmMUlrlG4tCRGhu7tCEzPc6Z4MBzxUiOWkWxPvNg3nzjdK/OhSm62
 zkznU8xOeoq2XwE6PA29vXAaXlVoPyfOVwTE7s1Zdq/tpZcIGeZqj5DtOqRYiufw
 YYWTb667rAcSEM0t/YfnzkuU1xA+rqSd2KrmjXhM6TfGRnyLWRnInr3e6FKaFcmE
 Q/bHfzdHHGl5WRfyBd6F0Bg5BIEuyDNew+pSfxXKPLoyJkvNJOg=
 =7BR5
 -----END PGP SIGNATURE-----

Merge tag 'efi-next-20230313' of https://source.denx.de/u-boot/custodians/u-boot-efi into next

Pull request efi-next-20230313

UEFI:

* Improve graphics support in EFI app

Others:

* x86: Add a few more items to bdinfo
* video: Remove duplicate cursor-positioning function
* video: Clear the vidconsole rather than the video
2023-03-13 15:36:52 -04:00
Tom Rini
218cf0e096 Pull request for efi-2023-04-rc4
Documentation:
 
 * man-page for panic command
 
 UEFI:
 
 * Correct parameter check for SetVariable()
 
 Other:
 
  * Provide unit test for crc8
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmQPMpwACgkQxIHbvCwF
 GsQVQA//WHuCAJg1mjVjGtmhMS/eWMgJun4fipZhUbmCZ9cxnB3EXfyZxnQo3o1G
 huYbIB5zVMZSDiJdRk0v3xlOjjq/YQETygURdVZ+biXYbY2ggdJQy5ulGaWKXTnR
 ISczFvNr/1UyoS9r2lJkG4+xgetRDzhGx05iFUkIIDEJi6UlKzTq9yHrtsUViL42
 9XuNmRmWk/RMRUmO+tGLqASvDkPxDeltjLIL+sQEN8BAhKckRhhiGt7Ft/KNXBTz
 kHutHVsKhPSqrQRFbn9sUEmNoTZIVoa4zJlvAzKRD5leFt878SKPRCptmiXL90ao
 I2QKQBwINhrUFFxX+giut5FAtLNu4ut8zXo16mX65iefQ64Q8q4H7RQm+x8IDu77
 4L4qxu7RWFSgD971Kl2O8VSm0J5OAHFpaE7S9n8M34Dc++clC5dX7ooApzUCjBTT
 idQxxEn7RLDcqfIfg+3Fw+4zeNUAG8g6bSg3w5jnxfk+CCuJecxyzOzxXvZwcYFe
 lmnt3aZNv47jaDWLOGLAOnVpGn9d9nHeRItK7In1tfQt1dfkg3bJUa3aBLloEQ/w
 TdQDBrWll3IEMOZCFRjYzY+i6my5Os+Zuw+1Sb7KJnNjjg+DI14wMvMADvZFB4an
 rls8Amm8RMkOeVVufB+nDB/9qyvdtxZCudg2cjwFZmnvtE6nJvY=
 =0URM
 -----END PGP SIGNATURE-----

Merge tag 'efi-2023-04-rc4' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2023-04-rc4

Documentation:

* man-page for panic command

UEFI:

* Correct parameter check for SetVariable()

Other:

 * Provide unit test for crc8
2023-03-13 11:39:21 -04:00
Heinrich Schuchardt
d3970e04e7 efi_loader: describe term_get_char()
Add a function description.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-03-13 13:56:14 +01:00
Masahisa Kojima
26a35023c4 efi_loader: update SetVariable attribute check
UEFI specification v2.10 says that
EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS is deprecated and
EFI_UNSUPPORTED should be returned in SetVariable variable service.
Current implementation returns EFI_INVALID_PARAMETER,
let's fix the return value.

Together with above change, this commit also updates the SetVariable
attribute check to be aligned with the EDK2 reference implementation.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-03-13 13:56:14 +01:00
Heinrich Schuchardt
5ee8d90f54 doc: man-page for panic command
Provide a man-page for the panic command.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:56:14 +01:00
Vincent Stehlé
ac2ac69080 doc: uefi: fix links
Fix a couple of links so that they are rendered correctly with sphinx.

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-03-13 13:56:14 +01:00
Heinrich Schuchardt
3080ddf970 test: unit test for crc8
Add a unit test for the crc8() function.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:56:14 +01:00
Simon Glass
61a6210541 video: Add a note about the broken implementation
The cls command is broken. Previous discussion about this was at [1] and
[2]. For now, add a note to the source code.

[1] https://patchwork.ozlabs.org/project/uboot/patch/
       20221022092058.106052-1-heinrich.schuchardt@canonical.com/
[2] https://patchwork.ozlabs.org/project/uboot/patch/
       20230106145243.411626-12-sjg@chromium.org/

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:53:01 +01:00
Simon Glass
b7adb69e9a efi: Add dhrystone, dcache and scroll lines to app
Add these options to provide some performance measurement, see cache
status and slightly speed up the appallingly slow console.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:53:01 +01:00
Simon Glass
a76b60f820 video: Clear the vidconsole rather than the video
It is better to clear the console device rather than the video device,
since the console has the text display. We also need to reset the cursor
position with the console, but not with the video device.

Add a new function to handle this and update the 'cls' command to use it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-13 13:53:01 +01:00