mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-24 21:54:01 +00:00
board: freescale: ls1088a: remove code under !CONFIG_DM_ETH
Now that DM_ETH is enabled by default, there is no point in keeping the non-DM_ETH code which initialized the ethernet interfaces. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
This commit is contained in:
parent
6bd026d7f7
commit
a33b8baf20
3 changed files with 4 additions and 830 deletions
|
@ -3,742 +3,9 @@
|
|||
* Copyright 2017 NXP
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <command.h>
|
||||
#include <env.h>
|
||||
#include <log.h>
|
||||
#include <net.h>
|
||||
#include <netdev.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/fsl_serdes.h>
|
||||
#include <hwconfig.h>
|
||||
#include <fsl_mdio.h>
|
||||
#include <malloc.h>
|
||||
#include <phy.h>
|
||||
#include <fm_eth.h>
|
||||
#include <i2c.h>
|
||||
#include <miiphy.h>
|
||||
#include <fsl-mc/fsl_mc.h>
|
||||
#include <fsl-mc/ldpaa_wriop.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#include "../common/qixis.h"
|
||||
|
||||
#include "ls1088a_qixis.h"
|
||||
|
||||
#ifndef CONFIG_DM_ETH
|
||||
#ifdef CONFIG_FSL_MC_ENET
|
||||
|
||||
#define SFP_TX 0
|
||||
|
||||
/* - In LS1088A A there are only 16 SERDES lanes, spread across 2 SERDES banks.
|
||||
* Bank 1 -> Lanes A, B, C, D,
|
||||
* Bank 2 -> Lanes A,B, C, D,
|
||||
*/
|
||||
|
||||
/* Mapping of 8 SERDES lanes to LS1088A QDS board slots. A value of '0' here
|
||||
* means that the mapping must be determined dynamically, or that the lane
|
||||
* maps to something other than a board slot.
|
||||
*/
|
||||
|
||||
static u8 lane_to_slot_fsm1[] = {
|
||||
0, 0, 0, 0, 0, 0, 0, 0
|
||||
};
|
||||
|
||||
/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs
|
||||
* housed.
|
||||
*/
|
||||
|
||||
static int xqsgii_riser_phy_addr[] = {
|
||||
XQSGMII_CARD_PHY1_PORT0_ADDR,
|
||||
XQSGMII_CARD_PHY2_PORT0_ADDR,
|
||||
XQSGMII_CARD_PHY3_PORT0_ADDR,
|
||||
XQSGMII_CARD_PHY4_PORT0_ADDR,
|
||||
XQSGMII_CARD_PHY3_PORT2_ADDR,
|
||||
XQSGMII_CARD_PHY1_PORT2_ADDR,
|
||||
XQSGMII_CARD_PHY4_PORT2_ADDR,
|
||||
XQSGMII_CARD_PHY2_PORT2_ADDR,
|
||||
};
|
||||
|
||||
static int sgmii_riser_phy_addr[] = {
|
||||
SGMII_CARD_PORT1_PHY_ADDR,
|
||||
SGMII_CARD_PORT2_PHY_ADDR,
|
||||
SGMII_CARD_PORT3_PHY_ADDR,
|
||||
SGMII_CARD_PORT4_PHY_ADDR,
|
||||
};
|
||||
|
||||
/* Slot2 does not have EMI connections */
|
||||
#define EMI_NONE 0xFF
|
||||
#define EMI1_RGMII1 0
|
||||
#define EMI1_RGMII2 1
|
||||
#define EMI1_SLOT1 2
|
||||
|
||||
static const char * const mdio_names[] = {
|
||||
"LS1088A_QDS_MDIO0",
|
||||
"LS1088A_QDS_MDIO1",
|
||||
"LS1088A_QDS_MDIO2",
|
||||
DEFAULT_WRIOP_MDIO2_NAME,
|
||||
};
|
||||
|
||||
struct ls1088a_qds_mdio {
|
||||
u8 muxval;
|
||||
struct mii_dev *realbus;
|
||||
};
|
||||
|
||||
struct reg_pair {
|
||||
uint addr;
|
||||
u8 *val;
|
||||
};
|
||||
|
||||
static void sgmii_configure_repeater(int dpmac)
|
||||
{
|
||||
struct mii_dev *bus;
|
||||
uint8_t a = 0xf;
|
||||
int i, j, k, ret;
|
||||
unsigned short value;
|
||||
const char *dev = "LS1088A_QDS_MDIO2";
|
||||
int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
|
||||
int i2c_phy_addr = 0;
|
||||
int phy_addr = 0;
|
||||
|
||||
uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
|
||||
uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
|
||||
uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
|
||||
uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
|
||||
|
||||
u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20};
|
||||
struct reg_pair reg_pair[10] = {
|
||||
{6, ®_val[0]}, {4, ®_val[1]},
|
||||
{8, ®_val[2]}, {0xf, NULL},
|
||||
{0x11, NULL}, {0x16, NULL},
|
||||
{0x18, NULL}, {0x23, ®_val[3]},
|
||||
{0x2d, ®_val[4]}, {4, ®_val[5]},
|
||||
};
|
||||
#if CONFIG_IS_ENABLED(DM_I2C)
|
||||
struct udevice *udev;
|
||||
#endif
|
||||
|
||||
/* Set I2c to Slot 1 */
|
||||
#if !CONFIG_IS_ENABLED(DM_I2C)
|
||||
ret = i2c_write(0x77, 0, 0, &a, 1);
|
||||
#else
|
||||
ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev);
|
||||
if (!ret)
|
||||
ret = dm_i2c_write(udev, 0, &a, 1);
|
||||
#endif
|
||||
if (ret)
|
||||
goto error;
|
||||
|
||||
switch (dpmac) {
|
||||
case 1:
|
||||
i2c_phy_addr = i2c_addr[1];
|
||||
phy_addr = 4;
|
||||
break;
|
||||
case 2:
|
||||
i2c_phy_addr = i2c_addr[0];
|
||||
phy_addr = 0;
|
||||
break;
|
||||
case 3:
|
||||
i2c_phy_addr = i2c_addr[3];
|
||||
phy_addr = 0xc;
|
||||
break;
|
||||
case 7:
|
||||
i2c_phy_addr = i2c_addr[2];
|
||||
phy_addr = 8;
|
||||
break;
|
||||
}
|
||||
|
||||
/* Check the PHY status */
|
||||
ret = miiphy_set_current_dev(dev);
|
||||
if (ret > 0)
|
||||
goto error;
|
||||
|
||||
bus = mdio_get_current_dev();
|
||||
debug("Reading from bus %s\n", bus->name);
|
||||
|
||||
ret = miiphy_write(dev, phy_addr, 0x1f, 3);
|
||||
if (ret > 0)
|
||||
goto error;
|
||||
|
||||
mdelay(10);
|
||||
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
||||
if (ret > 0)
|
||||
goto error;
|
||||
|
||||
mdelay(10);
|
||||
|
||||
if ((value & 0xfff) == 0x401) {
|
||||
miiphy_write(dev, phy_addr, 0x1f, 0);
|
||||
printf("DPMAC %d:PHY is ..... Configured\n", dpmac);
|
||||
return;
|
||||
}
|
||||
|
||||
#if CONFIG_IS_ENABLED(DM_I2C)
|
||||
i2c_get_chip_for_busnum(0, i2c_phy_addr, 1, &udev);
|
||||
#endif
|
||||
|
||||
for (i = 0; i < 4; i++) {
|
||||
for (j = 0; j < 4; j++) {
|
||||
reg_pair[3].val = &ch_a_eq[i];
|
||||
reg_pair[4].val = &ch_a_ctl2[j];
|
||||
reg_pair[5].val = &ch_b_eq[i];
|
||||
reg_pair[6].val = &ch_b_ctl2[j];
|
||||
for (k = 0; k < 10; k++) {
|
||||
#if !CONFIG_IS_ENABLED(DM_I2C)
|
||||
ret = i2c_write(i2c_phy_addr,
|
||||
reg_pair[k].addr,
|
||||
1, reg_pair[k].val, 1);
|
||||
#else
|
||||
ret = i2c_get_chip_for_busnum(0,
|
||||
i2c_phy_addr,
|
||||
1, &udev);
|
||||
if (!ret)
|
||||
ret = dm_i2c_write(udev,
|
||||
reg_pair[k].addr,
|
||||
reg_pair[k].val, 1);
|
||||
#endif
|
||||
if (ret)
|
||||
goto error;
|
||||
}
|
||||
|
||||
mdelay(100);
|
||||
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
||||
if (ret > 0)
|
||||
goto error;
|
||||
|
||||
mdelay(100);
|
||||
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
||||
if (ret > 0)
|
||||
goto error;
|
||||
|
||||
if ((value & 0xfff) == 0x401) {
|
||||
printf("DPMAC %d :PHY is configured ",
|
||||
dpmac);
|
||||
printf("after setting repeater 0x%x\n",
|
||||
value);
|
||||
i = 5;
|
||||
j = 5;
|
||||
} else {
|
||||
printf("DPMAC %d :PHY is failed to ",
|
||||
dpmac);
|
||||
printf("configure the repeater 0x%x\n", value);
|
||||
}
|
||||
}
|
||||
}
|
||||
miiphy_write(dev, phy_addr, 0x1f, 0);
|
||||
error:
|
||||
if (ret)
|
||||
printf("DPMAC %d ..... FAILED to configure PHY\n", dpmac);
|
||||
return;
|
||||
}
|
||||
|
||||
static void qsgmii_configure_repeater(int dpmac)
|
||||
{
|
||||
uint8_t a = 0xf;
|
||||
int i, j, k;
|
||||
int i2c_phy_addr = 0;
|
||||
int phy_addr = 0;
|
||||
int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
|
||||
|
||||
uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
|
||||
uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
|
||||
uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
|
||||
uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
|
||||
|
||||
u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20};
|
||||
struct reg_pair reg_pair[10] = {
|
||||
{6, ®_val[0]}, {4, ®_val[1]},
|
||||
{8, ®_val[2]}, {0xf, NULL},
|
||||
{0x11, NULL}, {0x16, NULL},
|
||||
{0x18, NULL}, {0x23, ®_val[3]},
|
||||
{0x2d, ®_val[4]}, {4, ®_val[5]},
|
||||
};
|
||||
|
||||
const char *dev = mdio_names[EMI1_SLOT1];
|
||||
int ret = 0;
|
||||
unsigned short value;
|
||||
#if CONFIG_IS_ENABLED(DM_I2C)
|
||||
struct udevice *udev;
|
||||
#endif
|
||||
|
||||
/* Set I2c to Slot 1 */
|
||||
#if !CONFIG_IS_ENABLED(DM_I2C)
|
||||
ret = i2c_write(0x77, 0, 0, &a, 1);
|
||||
#else
|
||||
ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev);
|
||||
if (!ret)
|
||||
ret = dm_i2c_write(udev, 0, &a, 1);
|
||||
#endif
|
||||
if (ret)
|
||||
goto error;
|
||||
|
||||
switch (dpmac) {
|
||||
case 7:
|
||||
case 8:
|
||||
case 9:
|
||||
case 10:
|
||||
i2c_phy_addr = i2c_addr[2];
|
||||
phy_addr = 8;
|
||||
break;
|
||||
|
||||
case 3:
|
||||
case 4:
|
||||
case 5:
|
||||
case 6:
|
||||
i2c_phy_addr = i2c_addr[3];
|
||||
phy_addr = 0xc;
|
||||
break;
|
||||
}
|
||||
|
||||
/* Check the PHY status */
|
||||
ret = miiphy_set_current_dev(dev);
|
||||
ret = miiphy_write(dev, phy_addr, 0x1f, 3);
|
||||
mdelay(10);
|
||||
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
||||
mdelay(10);
|
||||
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
||||
mdelay(10);
|
||||
if ((value & 0xf) == 0xf) {
|
||||
miiphy_write(dev, phy_addr, 0x1f, 0);
|
||||
printf("DPMAC %d :PHY is ..... Configured\n", dpmac);
|
||||
return;
|
||||
}
|
||||
|
||||
#if CONFIG_IS_ENABLED(DM_I2C)
|
||||
i2c_get_chip_for_busnum(0, i2c_phy_addr, 1, &udev);
|
||||
#endif
|
||||
|
||||
for (i = 0; i < 4; i++) {
|
||||
for (j = 0; j < 4; j++) {
|
||||
reg_pair[3].val = &ch_a_eq[i];
|
||||
reg_pair[4].val = &ch_a_ctl2[j];
|
||||
reg_pair[5].val = &ch_b_eq[i];
|
||||
reg_pair[6].val = &ch_b_ctl2[j];
|
||||
|
||||
for (k = 0; k < 10; k++) {
|
||||
#if !CONFIG_IS_ENABLED(DM_I2C)
|
||||
ret = i2c_write(i2c_phy_addr,
|
||||
reg_pair[k].addr,
|
||||
1, reg_pair[k].val, 1);
|
||||
#else
|
||||
ret = i2c_get_chip_for_busnum(0,
|
||||
i2c_addr[dpmac],
|
||||
1, &udev);
|
||||
if (!ret)
|
||||
ret = dm_i2c_write(udev,
|
||||
reg_pair[k].addr,
|
||||
reg_pair[k].val, 1);
|
||||
#endif
|
||||
if (ret)
|
||||
goto error;
|
||||
}
|
||||
|
||||
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
||||
if (ret > 0)
|
||||
goto error;
|
||||
mdelay(1);
|
||||
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
||||
if (ret > 0)
|
||||
goto error;
|
||||
mdelay(10);
|
||||
if ((value & 0xf) == 0xf) {
|
||||
miiphy_write(dev, phy_addr, 0x1f, 0);
|
||||
printf("DPMAC %d :PHY is ..... Configured\n",
|
||||
dpmac);
|
||||
return;
|
||||
}
|
||||
}
|
||||
}
|
||||
error:
|
||||
printf("DPMAC %d :PHY ..... FAILED to configure PHY\n", dpmac);
|
||||
return;
|
||||
}
|
||||
|
||||
static const char *ls1088a_qds_mdio_name_for_muxval(u8 muxval)
|
||||
{
|
||||
return mdio_names[muxval];
|
||||
}
|
||||
|
||||
struct mii_dev *mii_dev_for_muxval(u8 muxval)
|
||||
{
|
||||
struct mii_dev *bus;
|
||||
const char *name = ls1088a_qds_mdio_name_for_muxval(muxval);
|
||||
|
||||
if (!name) {
|
||||
printf("No bus for muxval %x\n", muxval);
|
||||
return NULL;
|
||||
}
|
||||
|
||||
bus = miiphy_get_dev_by_name(name);
|
||||
|
||||
if (!bus) {
|
||||
printf("No bus by name %s\n", name);
|
||||
return NULL;
|
||||
}
|
||||
|
||||
return bus;
|
||||
}
|
||||
|
||||
static void ls1088a_qds_enable_SFP_TX(u8 muxval)
|
||||
{
|
||||
u8 brdcfg9;
|
||||
|
||||
brdcfg9 = QIXIS_READ(brdcfg[9]);
|
||||
brdcfg9 &= ~BRDCFG9_SFPTX_MASK;
|
||||
brdcfg9 |= (muxval << BRDCFG9_SFPTX_SHIFT);
|
||||
QIXIS_WRITE(brdcfg[9], brdcfg9);
|
||||
}
|
||||
|
||||
static void ls1088a_qds_mux_mdio(u8 muxval)
|
||||
{
|
||||
u8 brdcfg4;
|
||||
|
||||
if (muxval <= 5) {
|
||||
brdcfg4 = QIXIS_READ(brdcfg[4]);
|
||||
brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
|
||||
brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
|
||||
QIXIS_WRITE(brdcfg[4], brdcfg4);
|
||||
}
|
||||
}
|
||||
|
||||
static int ls1088a_qds_mdio_read(struct mii_dev *bus, int addr,
|
||||
int devad, int regnum)
|
||||
{
|
||||
struct ls1088a_qds_mdio *priv = bus->priv;
|
||||
|
||||
ls1088a_qds_mux_mdio(priv->muxval);
|
||||
|
||||
return priv->realbus->read(priv->realbus, addr, devad, regnum);
|
||||
}
|
||||
|
||||
static int ls1088a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
|
||||
int regnum, u16 value)
|
||||
{
|
||||
struct ls1088a_qds_mdio *priv = bus->priv;
|
||||
|
||||
ls1088a_qds_mux_mdio(priv->muxval);
|
||||
|
||||
return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
|
||||
}
|
||||
|
||||
static int ls1088a_qds_mdio_reset(struct mii_dev *bus)
|
||||
{
|
||||
struct ls1088a_qds_mdio *priv = bus->priv;
|
||||
|
||||
return priv->realbus->reset(priv->realbus);
|
||||
}
|
||||
|
||||
static int ls1088a_qds_mdio_init(char *realbusname, u8 muxval)
|
||||
{
|
||||
struct ls1088a_qds_mdio *pmdio;
|
||||
struct mii_dev *bus = mdio_alloc();
|
||||
|
||||
if (!bus) {
|
||||
printf("Failed to allocate ls1088a_qds MDIO bus\n");
|
||||
return -1;
|
||||
}
|
||||
|
||||
pmdio = malloc(sizeof(*pmdio));
|
||||
if (!pmdio) {
|
||||
printf("Failed to allocate ls1088a_qds private data\n");
|
||||
free(bus);
|
||||
return -1;
|
||||
}
|
||||
|
||||
bus->read = ls1088a_qds_mdio_read;
|
||||
bus->write = ls1088a_qds_mdio_write;
|
||||
bus->reset = ls1088a_qds_mdio_reset;
|
||||
sprintf(bus->name, ls1088a_qds_mdio_name_for_muxval(muxval));
|
||||
|
||||
pmdio->realbus = miiphy_get_dev_by_name(realbusname);
|
||||
|
||||
if (!pmdio->realbus) {
|
||||
printf("No bus with name %s\n", realbusname);
|
||||
free(bus);
|
||||
free(pmdio);
|
||||
return -1;
|
||||
}
|
||||
|
||||
pmdio->muxval = muxval;
|
||||
bus->priv = pmdio;
|
||||
|
||||
return mdio_register(bus);
|
||||
}
|
||||
|
||||
/*
|
||||
* Initialize the dpmac_info array.
|
||||
*
|
||||
*/
|
||||
static void initialize_dpmac_to_slot(void)
|
||||
{
|
||||
struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
|
||||
u32 serdes1_prtcl, cfg;
|
||||
|
||||
cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
|
||||
FSL_CHASSIS3_SRDS1_PRTCL_MASK;
|
||||
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
|
||||
serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
|
||||
|
||||
switch (serdes1_prtcl) {
|
||||
case 0x12:
|
||||
printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
|
||||
serdes1_prtcl);
|
||||
lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
|
||||
lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
|
||||
lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
|
||||
lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
|
||||
break;
|
||||
case 0x15:
|
||||
case 0x1D:
|
||||
printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
|
||||
serdes1_prtcl);
|
||||
lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
|
||||
lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
|
||||
lane_to_slot_fsm1[2] = EMI_NONE;
|
||||
lane_to_slot_fsm1[3] = EMI_NONE;
|
||||
break;
|
||||
case 0x1E:
|
||||
printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
|
||||
serdes1_prtcl);
|
||||
lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
|
||||
lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
|
||||
lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
|
||||
lane_to_slot_fsm1[3] = EMI_NONE;
|
||||
break;
|
||||
case 0x3A:
|
||||
printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
|
||||
serdes1_prtcl);
|
||||
lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
|
||||
lane_to_slot_fsm1[1] = EMI_NONE;
|
||||
lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
|
||||
lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
|
||||
break;
|
||||
|
||||
default:
|
||||
printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
|
||||
__func__, serdes1_prtcl);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void ls1088a_handle_phy_interface_sgmii(int dpmac_id)
|
||||
{
|
||||
struct mii_dev *bus;
|
||||
struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
|
||||
u32 serdes1_prtcl, cfg;
|
||||
|
||||
cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
|
||||
FSL_CHASSIS3_SRDS1_PRTCL_MASK;
|
||||
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
|
||||
serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
|
||||
|
||||
int *riser_phy_addr;
|
||||
char *env_hwconfig = env_get("hwconfig");
|
||||
|
||||
if (hwconfig_f("xqsgmii", env_hwconfig))
|
||||
riser_phy_addr = &xqsgii_riser_phy_addr[0];
|
||||
else
|
||||
riser_phy_addr = &sgmii_riser_phy_addr[0];
|
||||
|
||||
switch (serdes1_prtcl) {
|
||||
case 0x12:
|
||||
case 0x15:
|
||||
case 0x1E:
|
||||
case 0x3A:
|
||||
switch (dpmac_id) {
|
||||
case 1:
|
||||
wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[1]);
|
||||
break;
|
||||
case 2:
|
||||
wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[0]);
|
||||
break;
|
||||
case 3:
|
||||
wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[3]);
|
||||
break;
|
||||
case 7:
|
||||
wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[2]);
|
||||
break;
|
||||
default:
|
||||
printf("WRIOP: Wrong DPMAC%d set to SGMII", dpmac_id);
|
||||
break;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
|
||||
__func__, serdes1_prtcl);
|
||||
return;
|
||||
}
|
||||
dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
|
||||
bus = mii_dev_for_muxval(EMI1_SLOT1);
|
||||
wriop_set_mdio(dpmac_id, bus);
|
||||
}
|
||||
|
||||
void ls1088a_handle_phy_interface_qsgmii(int dpmac_id)
|
||||
{
|
||||
struct mii_dev *bus;
|
||||
struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
|
||||
u32 serdes1_prtcl, cfg;
|
||||
|
||||
cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
|
||||
FSL_CHASSIS3_SRDS1_PRTCL_MASK;
|
||||
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
|
||||
serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
|
||||
|
||||
switch (serdes1_prtcl) {
|
||||
case 0x1D:
|
||||
case 0x1E:
|
||||
switch (dpmac_id) {
|
||||
case 3:
|
||||
case 4:
|
||||
case 5:
|
||||
case 6:
|
||||
wriop_set_phy_address(dpmac_id, 0, dpmac_id + 9);
|
||||
break;
|
||||
case 7:
|
||||
case 8:
|
||||
case 9:
|
||||
case 10:
|
||||
wriop_set_phy_address(dpmac_id, 0, dpmac_id + 1);
|
||||
break;
|
||||
}
|
||||
|
||||
dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
|
||||
bus = mii_dev_for_muxval(EMI1_SLOT1);
|
||||
wriop_set_mdio(dpmac_id, bus);
|
||||
break;
|
||||
default:
|
||||
printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
|
||||
serdes1_prtcl);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void ls1088a_handle_phy_interface_xsgmii(int i)
|
||||
{
|
||||
struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
|
||||
u32 serdes1_prtcl, cfg;
|
||||
|
||||
cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
|
||||
FSL_CHASSIS3_SRDS1_PRTCL_MASK;
|
||||
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
|
||||
serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
|
||||
|
||||
switch (serdes1_prtcl) {
|
||||
case 0x15:
|
||||
case 0x1D:
|
||||
case 0x1E:
|
||||
wriop_set_phy_address(i, 0, i + 26);
|
||||
ls1088a_qds_enable_SFP_TX(SFP_TX);
|
||||
break;
|
||||
default:
|
||||
printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
|
||||
serdes1_prtcl);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
static void ls1088a_handle_phy_interface_rgmii(int dpmac_id)
|
||||
{
|
||||
struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
|
||||
u32 serdes1_prtcl, cfg;
|
||||
struct mii_dev *bus;
|
||||
|
||||
cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
|
||||
FSL_CHASSIS3_SRDS1_PRTCL_MASK;
|
||||
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
|
||||
serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
|
||||
|
||||
switch (dpmac_id) {
|
||||
case 4:
|
||||
wriop_set_phy_address(dpmac_id, 0, RGMII_PHY1_ADDR);
|
||||
dpmac_info[dpmac_id].board_mux = EMI1_RGMII1;
|
||||
bus = mii_dev_for_muxval(EMI1_RGMII1);
|
||||
wriop_set_mdio(dpmac_id, bus);
|
||||
break;
|
||||
case 5:
|
||||
wriop_set_phy_address(dpmac_id, 0, RGMII_PHY2_ADDR);
|
||||
dpmac_info[dpmac_id].board_mux = EMI1_RGMII2;
|
||||
bus = mii_dev_for_muxval(EMI1_RGMII2);
|
||||
wriop_set_mdio(dpmac_id, bus);
|
||||
break;
|
||||
default:
|
||||
printf("qds: WRIOP: Unsupported RGMII SerDes Protocol 0x%02x\n",
|
||||
serdes1_prtcl);
|
||||
break;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
int board_eth_init(struct bd_info *bis)
|
||||
{
|
||||
int error = 0, i;
|
||||
#ifdef CONFIG_FSL_MC_ENET
|
||||
struct memac_mdio_info *memac_mdio0_info;
|
||||
char *env_hwconfig = env_get("hwconfig");
|
||||
|
||||
initialize_dpmac_to_slot();
|
||||
|
||||
memac_mdio0_info = (struct memac_mdio_info *)malloc(
|
||||
sizeof(struct memac_mdio_info));
|
||||
memac_mdio0_info->regs =
|
||||
(struct memac_mdio_controller *)
|
||||
CFG_SYS_FSL_WRIOP1_MDIO1;
|
||||
memac_mdio0_info->name = DEFAULT_WRIOP_MDIO1_NAME;
|
||||
|
||||
/* Register the real MDIO1 bus */
|
||||
fm_memac_mdio_init(bis, memac_mdio0_info);
|
||||
/* Register the muxing front-ends to the MDIO buses */
|
||||
ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII1);
|
||||
ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII2);
|
||||
ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1);
|
||||
|
||||
for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
|
||||
switch (wriop_get_enet_if(i)) {
|
||||
case PHY_INTERFACE_MODE_RGMII:
|
||||
case PHY_INTERFACE_MODE_RGMII_ID:
|
||||
ls1088a_handle_phy_interface_rgmii(i);
|
||||
break;
|
||||
case PHY_INTERFACE_MODE_QSGMII:
|
||||
ls1088a_handle_phy_interface_qsgmii(i);
|
||||
break;
|
||||
case PHY_INTERFACE_MODE_SGMII:
|
||||
ls1088a_handle_phy_interface_sgmii(i);
|
||||
break;
|
||||
case PHY_INTERFACE_MODE_XGMII:
|
||||
ls1088a_handle_phy_interface_xsgmii(i);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
|
||||
if (i == 16)
|
||||
i = NUM_WRIOP_PORTS;
|
||||
}
|
||||
}
|
||||
|
||||
error = cpu_eth_init(bis);
|
||||
|
||||
if (hwconfig_f("xqsgmii", env_hwconfig)) {
|
||||
for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
|
||||
switch (wriop_get_enet_if(i)) {
|
||||
case PHY_INTERFACE_MODE_QSGMII:
|
||||
qsgmii_configure_repeater(i);
|
||||
break;
|
||||
case PHY_INTERFACE_MODE_SGMII:
|
||||
sgmii_configure_repeater(i);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
if (i == 16)
|
||||
i = NUM_WRIOP_PORTS;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
error = pci_eth_init(bis);
|
||||
return error;
|
||||
}
|
||||
#endif // !CONFIG_DM_ETH
|
||||
|
||||
#if defined(CONFIG_RESET_PHY_R)
|
||||
void reset_phy(void)
|
||||
|
@ -747,10 +14,10 @@ void reset_phy(void)
|
|||
}
|
||||
#endif /* CONFIG_RESET_PHY_R */
|
||||
|
||||
#if defined(CONFIG_DM_ETH) && defined(CONFIG_MULTI_DTB_FIT)
|
||||
#if defined(CONFIG_MULTI_DTB_FIT)
|
||||
|
||||
/* Structure to hold SERDES protocols supported in case of
|
||||
* CONFIG_DM_ETH enabled (network interfaces are described in the DTS).
|
||||
/* Structure to hold SERDES protocols supported (network interfaces are
|
||||
* described in the DTS).
|
||||
*
|
||||
* @serdes_block: the index of the SERDES block
|
||||
* @serdes_protocol: the decimal value of the protocol supported
|
||||
|
|
|
@ -3,100 +3,7 @@
|
|||
* Copyright 2017 NXP
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <command.h>
|
||||
#include <net.h>
|
||||
#include <netdev.h>
|
||||
#include <malloc.h>
|
||||
#include <fsl_mdio.h>
|
||||
#include <miiphy.h>
|
||||
#include <phy.h>
|
||||
#include <fm_eth.h>
|
||||
#include <asm/io.h>
|
||||
#include <exports.h>
|
||||
#include <asm/arch/fsl_serdes.h>
|
||||
#include <fsl-mc/fsl_mc.h>
|
||||
#include <fsl-mc/ldpaa_wriop.h>
|
||||
|
||||
#ifndef CONFIG_DM_ETH
|
||||
int board_eth_init(struct bd_info *bis)
|
||||
{
|
||||
#if defined(CONFIG_FSL_MC_ENET)
|
||||
int i, interface;
|
||||
struct memac_mdio_info mdio_info;
|
||||
struct mii_dev *dev;
|
||||
struct ccsr_gur *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
|
||||
struct memac_mdio_controller *reg;
|
||||
u32 srds_s1, cfg;
|
||||
|
||||
cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
|
||||
FSL_CHASSIS3_SRDS1_PRTCL_MASK;
|
||||
cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
|
||||
|
||||
srds_s1 = serdes_get_number(FSL_SRDS_1, cfg);
|
||||
|
||||
reg = (struct memac_mdio_controller *)CFG_SYS_FSL_WRIOP1_MDIO1;
|
||||
mdio_info.regs = reg;
|
||||
mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME;
|
||||
|
||||
/* Register the EMI 1 */
|
||||
fm_memac_mdio_init(bis, &mdio_info);
|
||||
|
||||
reg = (struct memac_mdio_controller *)CFG_SYS_FSL_WRIOP1_MDIO2;
|
||||
mdio_info.regs = reg;
|
||||
mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME;
|
||||
|
||||
/* Register the EMI 2 */
|
||||
fm_memac_mdio_init(bis, &mdio_info);
|
||||
|
||||
switch (srds_s1) {
|
||||
case 0x1D:
|
||||
/*
|
||||
* 10GBase-R does not need a PHY to work, but to avoid U-boot
|
||||
* use default PHY address which is zero to a MAC when it found
|
||||
* a MAC has no PHY address, we give a PHY address to 10GBase-R
|
||||
* MAC error.
|
||||
*/
|
||||
wriop_set_phy_address(WRIOP1_DPMAC1, 0, 0x0a);
|
||||
wriop_set_phy_address(WRIOP1_DPMAC2, 0, AQ_PHY_ADDR1);
|
||||
wriop_set_phy_address(WRIOP1_DPMAC3, 0, QSGMII1_PORT1_PHY_ADDR);
|
||||
wriop_set_phy_address(WRIOP1_DPMAC4, 0, QSGMII1_PORT2_PHY_ADDR);
|
||||
wriop_set_phy_address(WRIOP1_DPMAC5, 0, QSGMII1_PORT3_PHY_ADDR);
|
||||
wriop_set_phy_address(WRIOP1_DPMAC6, 0, QSGMII1_PORT4_PHY_ADDR);
|
||||
wriop_set_phy_address(WRIOP1_DPMAC7, 0, QSGMII2_PORT1_PHY_ADDR);
|
||||
wriop_set_phy_address(WRIOP1_DPMAC8, 0, QSGMII2_PORT2_PHY_ADDR);
|
||||
wriop_set_phy_address(WRIOP1_DPMAC9, 0, QSGMII2_PORT3_PHY_ADDR);
|
||||
wriop_set_phy_address(WRIOP1_DPMAC10, 0,
|
||||
QSGMII2_PORT4_PHY_ADDR);
|
||||
|
||||
break;
|
||||
default:
|
||||
printf("SerDes1 protocol 0x%x is not supported on LS1088ARDB\n",
|
||||
srds_s1);
|
||||
break;
|
||||
}
|
||||
|
||||
for (i = WRIOP1_DPMAC3; i <= WRIOP1_DPMAC10; i++) {
|
||||
interface = wriop_get_enet_if(i);
|
||||
switch (interface) {
|
||||
case PHY_INTERFACE_MODE_QSGMII:
|
||||
dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
|
||||
wriop_set_mdio(i, dev);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
|
||||
wriop_set_mdio(WRIOP1_DPMAC2, dev);
|
||||
|
||||
cpu_eth_init(bis);
|
||||
#endif /* CONFIG_FMAN_ENET */
|
||||
|
||||
return pci_eth_init(bis);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_RESET_PHY_R)
|
||||
void reset_phy(void)
|
||||
|
|
|
@ -824,7 +824,7 @@ int board_init(void)
|
|||
ppa_init();
|
||||
#endif
|
||||
|
||||
#if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH)
|
||||
#if !defined(CONFIG_SYS_EARLY_PCI_INIT)
|
||||
pci_init();
|
||||
#endif
|
||||
|
||||
|
|
Loading…
Reference in a new issue