Commit graph

274 commits

Author SHA1 Message Date
Wenyou Yang
37dadbca0c board: atmel: sama5d2_xplained: add SPL support
The sama5d2 Xplained SPL supports the boot medias: spi flash
and SD Card.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-02-02 11:49:13 +01:00
Wenyou Yang
7e8702a00f arm: at91/spl: mpddrc: add struct atmel_mpddrc_config
Add struct atmel_mpddrc_config to accommodate the mpddrc register
configurations, not using the mpddrc register map structure,
struct atmel_mpddrc, in order to increase readability and reduce
run-time memory use.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-02-02 11:49:11 +01:00
Wenyou Yang
75238f2367 arm: atmel: Add SAMA5D2 Xplained board
The board supports following features:
 - Boot media support: SD card/e.MMC/SPI flash,
 - Support LCD display (optional, disabled by default),
 - Support ethernet,
 - Support USB mass storage.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
[fix checkpatch warnings]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-11-30 22:27:53 +01:00
Andreas Bießmann
610751e94f at91sam9260ek: add missing files to MAINTAINERS
This fixes the following genboardscfg.py warnings:

---8<---
WARNING: no status for 'at91sam9g20ek_2mmc'
WARNING: no maintainers for 'at91sam9g20ek_2mmc'
--->8---

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-08-28 12:33:18 -04:00
Andreas Bießmann
7751604ca9 at91sam9rlek: add missing files to MAINTAINERS
This fixes following genboardscfg.py warning:

---8<---
WARNING: no status for 'at91sam9rlek_mmc'
WARNING: no maintainers for 'at91sam9rlek_mmc'
--->8---

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-08-28 12:33:18 -04:00
Wu, Josh
89a3658ac0 ARM: at91: sama5d3xek: use a $dtb_name to load dtb
Since sama5d3xek boards has different type of dtb blobs, so we need to detect
the cpu type in runtime.

So we add a new variable $dtb_name. if $dtb_name is not defined, we just use
	at91-${board_name}.dtb

as the $dtb_name. Otherwise, we will just load the dtb with
	$dtb_name.

For sama5d3xek, we will detect cpu type and make up $dtb_name in
runtime.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
2015-08-21 15:47:04 +02:00
Erik van Luijk
c982f6b9bf arm: at91: pmc: replace the constant with a define in at91_pmc.h
To enable the clocks on the at91 boards a constant (0x4) is used.
This is replaced with a define in at91_pmc.h (1 <<  2).

Signed-off-by: Erik van Luijk <evanluijk@interact.nl>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-08-21 15:47:03 +02:00
Erik van Luijk
6560491fe5 arm: at91: at91sam9m10g45ek/corvus remove useless chip select 1 init
On these boards the DDR is connected to a dedicated controller and not
to chip select 1 of the EBI.

Signed-off-by: Erik van Luijk <evanluijk@interact.nl>
Tested-by: Erik van Luijk <evanluijk@interact.nl>
2015-08-21 15:47:03 +02:00
Erik van Luijk
0c01c3e876 arm: at91: mpddr: allow multiple DDR controllers
The mpddr.c depends on ATMEL_BASE_MPDDRC for the base address to configure the controller.
This cannot be used when there is more than one controller (i.e. AT91SAM9G45, AT91SAM9M10).

Signed-off-by: Erik van Luijk <evanluijk@interact.nl>
[remove 'new blank line at EOF']
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-08-21 15:47:02 +02:00
Andreas Bießmann
80d3d4ae93 avr32: take maintainership for atstk1002
I have this board at work, so I can trun tests on it.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-06-10 14:03:25 +02:00
Andreas Bießmann
e5354b8a9e avr32: delete non generic board's atstk100{3, 4, 6}
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-06-10 14:03:23 +02:00
Joe Hershberger
d2eaec6006 net: Remove the bd* parameter from net stack functions
This value is not used by the network stack and is available in the
global data, so stop passing it around.  For the one legacy function
that still expects it (init op on old Ethernet drivers) pass in the
global pointer version directly to avoid changing that interface.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reported-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
(Trival fix to remove an unneeded variable declaration in 4xx_enet.c)
2015-04-18 11:11:11 -06:00
Bo Shen
ff255e836a ARM: atmel: at91sam9n12ek: enable spl support
Enable SPL support for at91sam9n12ek boards, now it supports
boot up from NAND flash, serial flash.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-04-01 01:04:31 +02:00
Bo Shen
d85e8914b3 ARM: atmel: at91sam9x5ek: enable spl support
Enable SPL support for at91sam9x5ek board. Now, it supports
boot up from NAND flash and SPI flash.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-04-01 01:04:31 +02:00
Bo Shen
41d41a93fb ARM: atmel: at91sam9m10g45ek: enable spl support
Supports boot up from NAND flash with software ECC eanbled.
And supports boot up from SD/MMC card with FAT file system.

As the boot from SD/MMC card with FAT file system, the BSS
segment is too big to fit into SRAM, so, use the lds to put
it into SDRAM.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-04-01 01:04:30 +02:00
Wu, Josh
02fc64d1d9 ARM: at91: sama5d4: display the U-Boot version on LCD
This patch will display the U-Boot version on LCD.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
2015-04-01 01:04:26 +02:00
Bo Shen
66bfce55f1 ARM: atmel: sama5d4 xplained: enable mmc power
Enable the power for MMC/SD port.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-03-18 23:36:04 +01:00
Wu, Josh
111ec4c652 ARM: at91: at91sam9rlek: add mci support
This patch enable the MCI support for at91sam9rlek board.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
[rebase on ToT]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-03-18 23:36:01 +01:00
Masahiro Yamada
4614b89134 ARM: at91: move board select menu and common settings
The board select menu in arch/arm/Kconfig is still big.
To slim down it, this commit moves AT91 boards to
arch/arm/mach-at91/Kconfig.
Also, consolidate "config SYS_SOC" in each board Kconfig.

The Kconfig files under board/ directory were modified with the
following command:

    find board -name Kconfig | xargs sed -i -e '
    /config SYS_SOC/ {
        N
        /default "at91"/ {
            N
            d
        }
    }
    '

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Andreas Bießmann <andreas.devel@googlemail.co>
2015-02-21 08:23:51 -05:00
Andreas Bießmann
186678600a avr32: convert to dram_init()
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-02-17 22:52:41 +01:00
Andreas Bießmann
e9ed41cc5c avr32: rename mmu.h definitions
Prefix mmu.h PAGE_xxx definitions with MMU_ in order to prevent a naming
conflict with other definitions.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-02-17 22:52:40 +01:00
Bo Shen
0b2a982420 ARM: atmel: sama5d4_xplained: enable spl support
Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-02-07 23:42:55 +01:00
Bo Shen
5a4c9c2287 ARM: atmel: sama5d4ek: enable SPL support
The sama5d4ek support boot up from NAND flash, SD/MMC card and
also the SPI flash.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-02-07 23:42:53 +01:00
Bo Shen
4f26c8cac1 ARM: atmel: sama5d4_xplained: add option for usb ethernet gadget
Add the option for USB Ethernet gadget based on atmel usb
device.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-01-19 15:02:47 +01:00
Bo Shen
da08d791d9 ARM: atmel: sama5d4ek: add option for usb ethernet gadget
Add the option for USB Ethernet gadget based on atmel usb
device.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-01-19 15:02:45 +01:00
Masahiro Yamada
13e55b358e ARM: remove redudant information from Kconfig files
- "string" type for SYS_* is defined in arch/Kconfig
 - SYS_CPU "armv7" has been replaced with "select CPU_V7"
 - SYS_SOC "tegra124" is already defined in tegra124/Kconfig

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
2015-01-12 09:38:47 -05:00
Bo Shen
41e82da12a ARM: atmel: sama5d3xek: fix the LCD parameters
Remove unused vsync parameter, and correct the include file.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-01-11 02:16:04 +01:00
Bo Shen
f8009a7a67 ARM: atmel: sama5d4xek: fix the LCD parameters
Remove unused vsync parameter, and correct the include file.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-01-11 02:16:03 +01:00
Bo Shen
77d5b40705 ARM: atmel: sama5d4 xplained: fix the LCD parameters
Correct the LCD pixel clock, remove unused vsync parameter,
and also correct the include file.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2015-01-11 02:16:01 +01:00
Bo Shen
f196044dfd ARM: atmel: add sama5d4 xplained ultra board support
The code for this board supports following features:
  - Boot media support: NAND flash/SD card/SPI flash
  - Support LCD display (optional, disabled by default)
  - Support ethernet
  - Support USB mass storage

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-11-17 08:47:18 -05:00
Bo Shen
927b901b47 ARM: atmel: add sama5d4ek board support
The code for this board supports following features:
  - Boot media support: NAND flash/SD card/SPI flash
  - Support LCD display
  - Support ethernet
  - Support USB mass storage

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-11-17 08:47:18 -05:00
Georges Savoundararadj
2e07c249a6 kconfig: arm: introduce symbol for ARM CPUs
This commit introduces a Kconfig symbol for each ARM CPU:
CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136,
CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100.
Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selected
for CPU_ARM1176 and CPU_V7.

For each target, the corresponding CPU is selected and the definition of
SYS_CPU in the corresponding Kconfig file is removed.

Also, it removes redundant "string" type in some Kconfig files.

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-29 09:02:09 -04:00
Jeroen Hofstee
52422e37bb leds: missing include
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 15:27:35 -04:00
Andreas Bießmann
b719a08863 sama5d3xek: run PHY's config
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Bo Shen <voice.shen@atmel.com>
2014-10-10 21:51:17 +02:00
Masahiro Yamada
e5a504eb3d MAINTAINERS: comment out invalid maintainers
The "S:    Orphan" in MAINTAINERS means that the maintainer in the
"M:" field is unreachable (i.e. the email address is not working).
(Refer to the definition of "Orphan" adopted in U-Boot
in the log of commit 31f1b654b2,
"boards.cfg: move boards with invalid emails to Orphan")

For patch files adding global changes, scripts/get_maintainer.pl
adds bunch of such invalid email addresses, which results in
tons of annoying bounce emails.

This commit can be reproduced by the following command:

find . -name MAINTAINERS | xargs sed -i -e '
/^M:[[:blank:]]/ {
      N
      /S:[[:blank:]]Orphan/s/^/#/
}
'

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-09-24 18:30:28 -04:00
Bo Shen
a931b13774 ARM: atmel: sama5d3xek: add nor flash init function
Add NOR flash hardware init function, including SMC and PIO
configuration.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-09-19 00:11:15 +02:00
Masahiro Yamada
461be2f96e kconfig: remove redundant "string" type in arch and board Kconfigs
Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}
are specified in arch/Kconfig.

We can delete the ones in arch and board Kconfig files.

This commit can be easily reproduced by the following command:

find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '
/config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ {
    N
    s/\n[[:space:]]*string//
}
'

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-09-13 16:43:55 -04:00
Masahiro Yamada
93d4334f7f Add board MAINTAINERS files
We have switched to Kconfig and the boards.cfg file is going to
be removed. We have to retrieve the board status and maintainers
information from it.

The MAINTAINERS format as in Linux Kernel would be nice
because we can crib the scripts/get_maintainer.pl script.

After some discussion, we chose to put a MAINTAINERS file under each
board directory, not the top-level one because we want to collect
relevant information for a board into a single place.

TODO:
Modify get_maintainer.pl to scan multiple MAINTAINERS files.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Suggested-by: Tom Rini <trini@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 08:48:06 -04:00
Masahiro Yamada
dd84058d24 kconfig: add board Kconfig and defconfig files
This commit adds:
 - arch/${ARCH}/Kconfig
    provide a menu to select target boards
 - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
 - configs/${TARGET_BOARD}_defconfig
    default setting of each board

(This commit was automatically generated by a conversion script
based on boards.cfg)

In Linux Kernel, defconfig files are located under
arch/${ARCH}/configs/ directory.
It works in Linux Kernel since ARCH is always given from the
command line for cross compile.

But in U-Boot, ARCH is not given from the command line.
Which means we cannot know ARCH until the board configuration is done.
That is why all the "*_defconfig" files should be gathered into a
single directory ./configs/.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 08:48:01 -04:00
Jeroen Hofstee
c346e466e0 cosmetic: atmel: replace old style struct init
This prevents some warnings when building with clang.
cc:: andreas.devel@googlemail.com
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-06-11 16:27:05 -04:00
Wu, Josh
cf874c190e ARM: at91sam9m10g45ek: enable mci0 support
Also we enable the mmc command in configuration file.

As both CONFIG_CMD_MMC and CONFIG_CMD_USB use the CONFIG_DOS_PARTITION,
so remove the redundant CONFIG_DOS_PARTITION definition.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-05-27 00:10:54 +02:00
Bo Shen
cd23aac4bf ARM: atmel: enable SPL on sama5d3_xplained board
It supports boot from NAND and SD/MMC card.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-05-27 00:10:41 +02:00
Tom Rini
5495dae7aa Merge branch 'master' of git://git.denx.de/u-boot-arm 2014-03-10 14:22:54 -04:00
Bo Shen
27019e4a94 arm: atmel: sama5d3: add nand spl boot support
Add NAND SPL boot support with hardware PMECC.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-03-09 19:19:13 +01:00
Bo Shen
8a45b0ba87 arm: atmel: sama5d3: add spi spl boot support
Add SPI SPL boot support for sama5d3xek board.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-03-09 19:18:33 +01:00
Bo Shen
7ca6f36325 ARM: atmel: add sama5d3 Xplained board support
Add sama5d3 Xplained board support which use Atmel SAMA5D36 SoC.
Now it supports boot from NAND flash and SD/MMC card.
Features support:
  - NAND flash
  - SD/MMC card
  - Two USB hosts
  - Ethernet (one GMAC, one EMAC)

Signed-off-by: Bo Shen <voice.shen@atmel.com>
[reorder boards.cfg]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-03-09 19:09:50 +01:00
Andreas Henriksson
81724e09a0 at91sam9263ek: add mmc support
Add support for using the Atmel MCI driver on at91sam9263ek.
This change is modeled after the existing at91sam9260ek support.

Please note that this hooks up slot1 (MCI1) for SD. Not both.

Tested with at91bootstrap and u-boot on dataflash in slot 0
and fat-formatted 8GB SDHC in slot 1 on first revision
at91sam9263ek (which must use dataflash in slot0 to boot).

CONFIG_ATMEL_MCI_PORTB not tested.

Signed-off-by: Andreas Henriksson <andreas.henriksson@endian.se>
[remove empty line]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-03-09 18:24:52 +01:00
Alexey Brodkin
1ace402239 sizes.h - consolidate for all architectures
Copied from Linux sources "include/linux/sizes.h" commit
413541dd66d51f791a0b169d9b9014e4f56be13c

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Tom Rini <trini@ti.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Acked-by: Tom Rini <trini@ti.com>
Acked-by: Stefan Roese <sr@denx.de>
[trini: Add bcm Kona platforms to the patch]
Signed-off-by: Tom Rini <trini@ti.com>
2014-03-04 12:15:01 -05:00
Bo Shen
8d7b3638e9 arm: atmel: at91sam9x5: cleanup cs configure for spi
As the cs for spi is worked in gpio mode, so no need to configure
it as peripheral and then configure to gpio. Configure it to gpio
directly.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-12-17 17:21:14 +01:00
Albert ARIBAUD
f15ea6e1d6 Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts:
	arch/arm/cpu/armv7/rmobile/Makefile
	doc/README.scrapyard

Needed manual fix:
	arch/arm/cpu/armv7/omap-common/Makefile
	board/compulab/cm_t335/u-boot.lds
2013-12-10 22:23:59 +01:00
Heiko Schocher
4535a24c0c arm926ejs, at91: add common phy_reset function
add common phy reset code into a common function.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Jens Scharsig <esw@bus-elektronik.de>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Stelian Pop <stelian@popies.net>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Eric Benard <eric@eukrea.com>
Cc: Markus Hubig <mhubig@imko.de>
Acked-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
Tested-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
Tested-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-12-01 22:38:52 +01:00
Bo Shen
c5e8885aab arm: atmel: sama5d3: spl boot from fat fs SD card
Enable Atmel sama5d3xek boart spl boot support, which can load u-boot
from SD card with FAT file system.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-12-01 22:38:51 +01:00
Bo Shen
d2acb986db arm: atmel: sama5d3: early enable PIO peripherals
Enable the PIO peripherals early than other peripherals.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-12-01 22:38:45 +01:00
Wu, Josh
d02a60a16e sama5d3xek: support larger than 4G nand flash
Signed-off-by: Josh Wu <josh.wu@atmel.com>
2013-11-21 13:33:41 -06:00
Albert ARIBAUD
85b8c5c4bf Merge branch 'iu-boot/master' into 'u-boot-arm/master'
Conflicts:
	arch/arm/cpu/arm926ejs/mxs/Makefile
	board/compulab/cm_t35/Makefile
	board/corscience/tricorder/Makefile
	board/ppcag/bg0900/Makefile
	drivers/bootcount/Makefile
	include/configs/omap4_common.h
	include/configs/pdnb3.h

Makefile conflicts are due to additions/removals of
object files on the ARM branch vs KBuild introduction
on the main branch. Resolution consists in adjusting
the list of object files in the main branch version.
This also applies to two files which are not listed
as conflicting but had to be modified:

	board/compulab/common/Makefile
	board/udoo/Makefile

include/configs/omap4_common.h conflicts are due to
the OMAP4 conversion to ti_armv7_common.h on the ARM
side, and CONFIG_SYS_HZ removal on the main side.
Resolution is to convert as this icludes removal of
CONFIG_SYS_HZ.

include/configs/pdnb3.h is due to a removal on ARM side.
Trivial resolution is to remove the file.

Note: 'git show' will also list two files just because
they are new:

	include/configs/am335x_igep0033.h
	include/configs/omap3_igep00x0.h
2013-11-09 22:59:47 +01:00
Bo Shen
d9bef0ad2d arm: atmel: at91sam9n12ek: add usb host support
Add usb host support for at91sam9n12ek board.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-11-04 20:32:35 +01:00
Masahiro Yamada
a79854a90f board: arm: convert makefiles to Kbuild style
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Vipin Kumar <vipin.kumar@st.com>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Tom Rini <trini@ti.com>
2013-11-01 11:42:12 -04:00
Masahiro Yamada
8fb80a8bb4 avr32: convert makefiles to Kbuild style
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
2013-10-31 13:26:45 -04:00
Bo Shen
3668ce3c80 ARM: atmel: add RNDIS gadget support
Add RNDIS gadget support to test atmel usba udc driver

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2013-09-24 17:51:35 +02:00
Bo Shen
77461a6538 arm: atmel: remove the config.mk file
remove the config.mk file
move text base define to board config file for following boards
  - at91sam9m10g45ek
  - at91sam9x5ek

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-08-22 16:51:15 +02:00
Bo Shen
e08d6f3aaf arm: atmel: add gmac support for sama5d3xek board
add gmac support for sama5d3xek board, the gmac embedded in:
  - sama5d33, sama5d34, sama5d35

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-08-22 16:49:54 +02:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Bo Shen
b899fa3901 arm: at91sam9n12: change EBI IO to high drive mode
As both the DDR SDRAM and NAND flash connect to EBI on at91sam9n12
and share the lower 8 bits data line. If use low drive of the data
line, it will cause DDR data access corrupt in lower address, so
change the data line to high drive mode

This will fix the Linux kernel boot issue when use Lower address

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-07-22 08:20:14 -04:00
Bo Shen
162762205f ARM: at91sam9n12: add network support with ksz8851_16mll
add network support with ksz8851_16mll on at91sam9n12ek board

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-06-24 19:11:14 -05:00
Bo Shen
3225f34e5c ARM: atmel: add sama5d3xek support
Add sama5d3xek support with following feature
  - boot from NAND flash, PMECC support, 4bit ECC @ 512 bytes sector
  - boot from SPI flash support
  - boot from SD card support
  - LCD support
  - EMAC support
  - USB OHCI support

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-05-21 11:54:16 +02:00
Andreas Bießmann
d0a5137313 at91sam9260ek: move board id setup to config header
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
2013-05-12 16:49:14 +02:00
Wu, Josh
a73267a7ce arm: at91: enable mci support for at91sam9g20ek.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-05-12 16:42:24 +02:00
Wu, Josh
9e33690389 arm: at91: add at91sam9n12ek board support
Add support for following features:
  - nand boot, with PMECC 2bit ECC for 512 bytes sector
  - SPI flash boot
  - SD card boot
  - LCD support

Signed-off-by: Josh Wu <josh.wu@atmel.com>
[fix -Wimplicit-function-declaration for at91_lcd_hw_init()]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-05-12 16:40:42 +02:00
Bo Shen
8495faf525 ARM: atmel: add at91sam9g20ek_2mmc nand boot support
Add at91sam9g20_2mmc nand boot support. on this board, there is no
dataflash, so disable it

change one commet for at91sam9g20ek board

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-02-19 11:54:06 +01:00
Richard Genoud
bcfc8976e5 at91sam9x5: enable USB support for 9x5ek board.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-12-09 22:38:27 +01:00
Wu, Josh
3a49cd7e1a ARM: at91sam9x5: enable MCI0 support for 9x5ek board.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-10-17 11:29:25 +02:00
Albert ARIBAUD
1c27059a2f Merge remote-tracking branch 'u-boot/master' 2012-09-30 23:49:17 +02:00
Wu, Josh
1c5794a13e at91sam9x5: set default EBI I/O drive configuration.
This patch configure at91sam9x5's EBI drive I/O. Without this, When SD card boot, the nand flash read/write are not stable. Which will cause kernel MTD test fail (Since mainline kernel doesn't configure the EBI register).

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-09-13 14:27:28 +02:00
Andreas Bießmann
a420dfe2b0 avr32: add atngw100mkii board
This patch is derived from an older patch provided by atmel in its
buildroot-avr32-v3.0.0.tar.bz2

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
2012-09-13 13:33:11 +02:00
Wu, Josh
2ab4c74604 at91: 9x5: change SMC config timing that both works for PMECC & non-PMECC.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Tested-by: voice.shen@atmel.com
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-09-01 17:06:14 +02:00
Andreas Bießmann
bfc325ed38 arm:at91-boards: remove console_init_f where unnecessary
A lot of at91 boards have the console_init_f in board_init. This is useless
cause it was called before by generic code in lib/board.c.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
cc: Jens Scharsig <esw@bus-elektronik.de>
cc: Stelian Pop <stelian@popies.net>
cc: Sedji Gaouaou<sedji.gaouaou@atmel.com>
cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
cc: Eric Benard <eric@eukrea.com>
Tested-by: voice.shen@atmel.com
Tested-by: voice.shen@atmel.com
Acked-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
Tested-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
2012-09-01 17:06:14 +02:00
Andreas Bießmann
82c4c64526 at91sam9263ek: remove unnecessary console_init_f
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
cc: Stelian Pop <stelian@popies.net>
2012-09-01 17:06:14 +02:00
Bo Shen
4ed9c88603 arm : at91sam9x5 : fix a small bug for NAND
fix a bug:
  when not boot from NAND, the NAND flash can not be detected.
  Using this to fix it

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-09-01 17:06:13 +02:00
Bo Shen
f7fa2f3740 arm : Atmel : add at91sam9x5ek board support
Add at91sam9x5ek board support, this board support the following SoCs
  AT91SAM9G15, AT91SAM9G25, AT91SAM9G35, AT91SAM9X25, AT91SAM9X35

Using at91sam9x5ek_nandflash to configure for the board
Now only supports NAND with software ECC boot up

Signed-off-by: Bo Shen <voice.shen@atmel.com>
[move MAINTAINERS entry to right place]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-09-01 14:58:14 +02:00
Alexandre Belloni
e139cb31d3 AT91SAM9*: Change kernel address in dataflash to match u-boot's size
On at91sam platforms, u-boot grew larger than the allocated size in
dataflash, the layout was:
bootstrap  0x00000000
ubootenv   0x00004200
uboot      0x00008400
kernel     0x00042000
fs         0x00252000

u-boot with the defconfig doesn't seem to fit in 0x42000 - 0x8400 =
0x39C00 bytes anymore.

Now, the layout is:
bootstrap  0x00000000
ubootenv   0x00004200
uboot      0x00008400
kernel     0x00084000
fs         0x00294000

Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-07-07 14:07:30 +02:00
esw@bus-elektronik.de
2feb736661 Fix: broken boot message at serial line on AT91SAM9263-EK board
Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-07-07 14:07:29 +02:00
Stelian Pop
c9e798d35a Fix Stelian's email address
Change my old email address which is no longer valid.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-29 15:43:38 +01:00
Mike Frysinger
464c79207c punt unused clean/distclean targets
The top level Makefile does not do any recursion into subdirs when
cleaning, so these clean/distclean targets in random arch/board dirs
never get used.  Punt them all.

MAKEALL didn't report any errors related to this that I could see.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-15 22:20:36 +02:00
Jason Kridner
2d3be7c456 led: remove camel casing of led identifiers globally
Result of running the following command to address Wolfgang's
comment about camel case:

for file in `find . | grep '\.[chS]$'`; do perl -i -pe
's/(green|yellow|red|blue)_LED_(on|off)/$1_led_$2/g' $file; done

Discussion:
http://patchwork.ozlabs.org/patch/84988/

Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Joel A Fernandes <agnel.joel@gmail.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-13 08:30:52 +02:00
Wolfgang Denk
1c85752258 ARM: remove broken "at91rm9200dk" board
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04 11:36:15 +02:00
Wolfgang Denk
b550834458 ARM: remove broken "at91cap9adk" board
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stelian Pop <stelian.pop@leadtechdesign.com>
2011-09-04 11:36:14 +02:00
Thomas Petazzoni
5cfeec5125 atmel: Update support of board AT91SAM9M10G45-EK to new style
Based on earlier work by Alex Waterman <awaterman@dawning.com>.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2011-09-03 22:40:45 +02:00
Xu, Hong
cd46b0f2b9 AT91: Makes AT91SAM9263-EK build correctly against u-boot-atmel/master
Rework for AT91SAM9263-EK, makes it build again.
Based on the work for AT91SAM9260-EK.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Reinhard Meyer <uboot@emk-elektronik.de>
2011-08-03 13:00:56 +02:00
Xu, Hong
f7aea46d6a AT91: Board fix for AT91SAM9261-EK
Fix board part of AT91SAM9261-EK according to the new scheme

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-08-03 13:00:56 +02:00
Xu, Hong
21d671d0c4 AT91: Makes AT91SAM9RL-EK build correctly against u-boot-atmel/master
Rework for AT91SAM9RL-EK, makes it build again.
Based on the work for AT91SAM9260-EK.
V4: added changes to MAKEALL

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-08-03 13:00:56 +02:00
Albert ARIBAUD
a55d23ccf6 Remove volatile qualifier in get_ram_size() calls
Checkpatch.pl complains about the volatile qualifier in calls to
get_ram_size(). Remove this qualifier in the prototype and in the
calls where it is useless, and leave it only in the function body
where it is needed.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-07-17 17:11:53 +02:00
Graeme Russ
a60d1e5b8e Timer: Fix misuse of ARM *timer_masked() functions outside arch/arm
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-07-16 11:55:00 +02:00
Andreas Bießmann
221786525f atstk100x: switch to common cfi driver
This patch removes the board implemenatation for flash driver which can now
safely switched to the common cfi driver.

Compile tested for all atstk100x boards, runtime tested on atstk1002.

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-07-04 10:55:27 +02:00
Andreas Bießmann
3432a93bcd at91rm9200ek: use atmel_usart
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2011-07-04 10:55:27 +02:00
Reinhard Meyer
8c6407fce3 AT91 rework: fix at91sam(9260/9g20/9xe)ek board port to build again:
Make ATMEL's at91sam9260/9g20/9xe-ek boards build again

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-06-21 22:26:22 +02:00
Jens Scharsig
8073399444 update arm/at91rm9200 work with rework rework110202
* convert at91rm9200ek and eb_cpux9k2 board to ATMEL_xxx name scheme
 * Fix: timer.c compile error io.h not found with arm/at91rm9200
 * update arm920t/at91 to ATMEL_xxx name scheme
 * update arm920t/at91 soc lib
 * update at91_emac driver

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
Tested-by: Andreas Bießmann <andreas.devel@gmail.com>
2011-06-21 22:26:21 +02:00
Andreas Bießmann
47293c18ba atstk100x: move CONFIG_SYS_TEXT_BASE to header
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18 07:56:54 +02:00
Andreas Bießmann
da48437230 atngw100: move CONFIG_SYS_TEXT_BASE to header
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18 07:56:54 +02:00
Andreas Bießmann
bb7dc6af20 avr32: use single linker script
This patch move the atstk100x linker script to $(CPUDIR) and delete other
pure copies of this file in each board directory.

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18 07:56:53 +02:00
Andreas Bießmann
758472cc7b avr32/config.mk: simplify PLATFORM_RELFLAGS
This patch removes PLATFORM_RELFLAGS from board specific config.mk files and
define them in arch specific config.mk file.

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
2011-05-18 07:56:53 +02:00