Stefan Roese
8f085e324a
Merge with git://www.denx.de/git/u-boot.git
2007-07-16 13:28:47 +02:00
Stefan Roese
c883f6ea32
Coding style cleanup
...
Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-16 13:11:12 +02:00
Stefan Roese
c7e8410e3c
Merge with /home/stefan/git/u-boot/u-boot-coldfire-freescale
2007-07-16 11:51:41 +02:00
Stefan Roese
8848ec858f
ppc4xx: Code cleanup
...
Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-16 10:02:12 +02:00
Stefan Roese
2a49fc17d0
ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
...
Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-16 10:01:38 +02:00
Stefan Roese
df3f17422a
ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
...
The new boardspecific DDR2 controller configuration is used for the Yucca
board. Now the Yucca board with 440SPe Rev. A chips is also supported.
Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-16 10:00:43 +02:00
Heiko Schocher
9079024723
[PCS440EP] - The DIAG LEDs are now blinking, if an error occur
...
- fix compile error, if BUILD_DIR is used
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-07-13 08:26:05 +02:00
Wolfgang Denk
fd3635190b
Merge with /home/tur/git/u-boot#cm1_qp1
2007-07-12 01:42:41 +02:00
Ed Swarthout
bfb37b32d1
8544ds: Fix Makefile after moving pixis to board/freescale.
...
The OBJTREE != SRCTREE build scenario was broken.
This fixes it.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-11 18:19:06 -05:00
Andy Fleming
ccc091aac6
Add support for CPM device tree configuration to 8560 ADS
...
* Adds code to modify CPM frequencies
* Cleans up the config file to #define TSEC and (for now) #undef FCC
* Adds the MII command for all 8560 ADS configurations
* Updates config file to provide convenience commands for booting
with a device tree
Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-07-11 18:17:58 -05:00
Bartlomiej Sieka
fa1df30892
CM1.QP1: Support for the Schindler CM1.QP1 board.
...
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-07-11 20:11:07 +02:00
Heiko Schocher
96e1d75be8
[PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
...
- now the Flash ST M29W040B is supported (not tested)
- fix the "led" command
- fix compile error, if BUILD_DIR is used
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-07-11 18:39:11 +02:00
John Rigby
98c80b462f
Merge branch 'master' into u-boot-5329-early
2007-07-10 14:58:41 -06:00
TsiChungLiew
3b635492c9
Update for flash.o and mii.o
...
Removed flash.o and added mii.o
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10 14:29:09 -06:00
TsiChungLiew
c5ded275d8
MII functions calls.
...
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10 14:29:09 -06:00
TsiChungLiew
427c814104
Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
...
The removed MII routines will be placed in mii.c.
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10 14:29:08 -06:00
TsiChungLiew
01a793fda0
Duplicate code
...
There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2007-07-10 14:29:08 -06:00
Jon Loeliger
d39b574158
board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
...
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
Those always evaluated TRUE, and thus were always compiled
even when IDE really wasn't defined/wanted.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 10:48:22 -05:00
Jon Loeliger
77a318545d
board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
...
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
Those always evaluated TRUE, and thus were always compiled
even when IDE really wasn't defined/wanted.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 10:39:10 -05:00
Jon Loeliger
079a136c35
include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
...
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
used to be included but CONFIG_BOOTP_MASK was not defined.
Remove lingering references to CFG_CMD_* symbols.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 10:12:10 -05:00
Jon Loeliger
ab3abcbabd
board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09 18:48:11 -05:00
Jon Loeliger
3fe00109a5
board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09 18:48:09 -05:00
Jon Loeliger
c508a4cefd
board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09 18:48:06 -05:00
Jon Loeliger
b9307262f8
board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09 18:48:04 -05:00
Jon Loeliger
fcec2eb93e
board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09 18:47:45 -05:00
Wolfgang Denk
4ef218f6fd
Coding style cleanup; update CHANGELOG.
...
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-07-10 00:01:28 +02:00
Wolfgang Denk
bf6a9ca9b2
Merge with /home/hs/Atronic/u-boot
2007-07-09 23:41:45 +02:00
Stefan Roese
c8603cfbd4
Small coding style cleanup
...
Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-09 11:00:24 +02:00
Matthias Fuchs
bd84ee4c20
Migrate esd 405EP boards to new NAND subsystem
...
Migrate esd 405EP boards to new NAND subsystem
-cleanup
-use correct io accessors (in/out_be32())
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2007-07-09 10:55:51 +02:00
Matthias Fuchs
e09f7ab574
Migrate esd 405EP boards to new NAND subsystem
...
This patch prepares the migration from the legacy NAND driver
to U-Boot's new NAND subsystem for esd boards.
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2007-07-09 10:55:39 +02:00
Jon Loeliger
498ff9a228
include/configs: Use new CONFIG_CMD_* in various A* named board config files.
...
Since ADS860.h includes "board/fads/fads.h" with ramifications
on the CONFIG_COMMAND treatment, it too has to be adjusted to
exclude already configured commands in this same commit.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-07 20:28:28 -05:00
Wolfgang Denk
e80955f07d
Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xx
2007-07-06 02:50:34 +02:00
Wolfgang Denk
f1152f8c28
Code cleanup and default config update for STC GP3 SSA board.
...
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-07-06 02:50:19 +02:00
Niklaus Giger
f780b83316
resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
...
Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
2007-07-04 10:14:07 +02:00
Stefan Roese
04e6c38b76
ppc4xx: Update lwmon5 board
...
- Add optional ECC generation routine to preserve existing
RAM values. This is needed for the Linux log-buffer support
- Add optional DDR2 setup with CL=4
- GPIO50 not used anymore
- Lime register setup added
Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-04 10:06:30 +02:00
Grant Likely
5af61b2f4b
Correct fixup relocation for mpc8260
...
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:08:27 +02:00
Grant Likely
f3a52fe059
Correct fixup relocation for mpc824x
...
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:08:19 +02:00
Grant Likely
e1a6144c32
Remove obsolete mpc83xx linker scripts
...
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:07:13 +02:00
Grant Likely
17e32fc390
Consolidate mpc8260 linker scripts
...
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:06:59 +02:00
Grant Likely
af7d38b393
Remove obsolete mpc824x linker scripts
...
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:06:49 +02:00
Grant Likely
f94a3aeceb
Remove obsolete mpc824x linker scripts (3 of 4)
...
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:06:41 +02:00
Grant Likely
a71c084f3a
Remove obsolete mpc824x linker scripts (2 of 4)
...
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:06:31 +02:00
Grant Likely
f670a15468
Remove obsolete mpc824x linker scripts (1 of 4)
...
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:06:14 +02:00
Grant Likely
09555bd45a
Remove obsolete mpc8220 linker scripts
...
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:06:03 +02:00
Grant Likely
5efb992f04
Remove obsolete mpc5xxx linker scripts (3 of 3)
...
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:05:53 +02:00
Grant Likely
07c13dfef6
Remove obsolete mpc5xxx linker scripts (2 of 3)
...
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:05:44 +02:00
Grant Likely
b4f67513a6
Remove obsolete mpc5xxx linker scripts (1 of 3)
...
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:05:31 +02:00
Grant Likely
b7d8e05f86
Remove obsolete mpc5xx linker scripts
...
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:05:23 +02:00
Grant Likely
5fc59175b9
Consolidate mpc8260 linker scripts
...
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:05:04 +02:00
Grant Likely
737f9eb02d
Consolidate mpc824x linker scripts
...
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04 01:04:52 +02:00