Commit graph

25079 commits

Author SHA1 Message Date
Michal Simek
2036621a61 arm64: zynqmp: Fix Siva's email address format
Some patches didn't have his full name and also there was one more ">" at
the end of email address. That's why correct both of these issues.

Fixes: 174d728471 ("arm64: zynqmp: Switch to amd.com emails")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/e970cc0dfabe293c2baf6b231d34f3af0386f1eb.1695378830.git.michal.simek@amd.com
2023-10-09 10:25:32 +02:00
Michal Simek
1b273a960a arm64: zynqmp: Describe bus-width for SD card on KV260
SD card is connected with 4 data lines which should be described properly.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/065cb9f1c6706eb4d70066e25cfc30d17b9f875d.1695378830.git.michal.simek@amd.com
2023-10-09 10:25:32 +02:00
Michal Simek
1aa867094b arm64: xilinx: Use lower case for partition address
Lower case should be used for register address.
Issue is reported as:
flash@0: partitions: Unevaluated properties are not allowed
('partition@22A0000' was unexpected)

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/66b3361df883ecab4f36ce3b4196fb606c802598.1695378830.git.michal.simek@amd.com
2023-10-09 10:25:32 +02:00
Michal Simek
0ece85e452 arm64: xilinx: Remove address/size-cells from flash node
Partitions are described via fixed-partitions that's why there is no need
to have address/size-cells in flash node.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/c704be9d9f3d09c1cc55b092efeb9c73fcda6451.1695378830.git.michal.simek@amd.com
2023-10-09 10:25:32 +02:00
Tanmay Shah
f4681b1e8c arm64: dts: xilinx: zynqmp: Add RPU subsystem device node
RPU subsystem can be configured in cluster-mode or split mode.
Also each r5 core has separate power domains.

Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/dde364939b4fbe3f7be7b6f5dff42e7d8b2f5c46.1695378830.git.michal.simek@amd.com
2023-10-09 10:25:32 +02:00
Michal Simek
6b049190c9 arm64: zynqmp: Describe interrupts by using macros
Use arm-gic.h and irq.h for interrupt description. It helps to improve
readability of device tree file.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/e0db567e1eb4e4e90e59270f41708919682dacf4.1695378830.git.michal.simek@amd.com
2023-10-09 10:25:32 +02:00
Michal Simek
ec38d95f75 arm64: zynqmp: Rename dt overlay file names from dts to dtso
Use dtso suffix instead of dts. Build option was introduced by
commit a0f9a77912 ("kbuild: Allow DTB overlays to built from .dtso named
source files").

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/1dce37e72428c14a3ccbb5dc674b90dfe56b75ac.1695046155.git.michal.simek@amd.com
2023-10-09 10:25:32 +02:00
Michal Simek
2e495fb537 arm64: zynqmp: Describe assigned-clocks for uarts
Describe assigned-clocks for both uarts. SOM is using this functionality.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/bddbb81209a4567b0939c5d2d0ecb42fdfcd71ea.1695036114.git.michal.simek@amd.com
2023-10-09 10:25:32 +02:00
Tom Rini
d9bb6d779b Merge tag 'u-boot-rockchip-20231007' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Add Board: rk3568 Bananapi R2Pro;
- Update pcie bifurcation support;
- dwc_eth_qos controller support for rk3568 and rk3588;
- Compressed binary support for U-Boot on rockchip platform;
- dts and config updates for different board and soc;

[ trini: Fix conflict on include/spl.h ]
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-08 09:58:55 -04:00
Jonas Karlman
dd8d52c934 rockchip: rk356x-u-boot: Add bootph-all to i2c0_xfer pinctrl node
A RK8XX PMIC is typically using i2c0 on RK356x devices. Add bootph-all
to required pinctrl nodes to simplify use of the prevent booting on
power plug-in option in SPL.

With the following Kconfig options and nodes in u-boot.dtsi the prevent
booting on power plug-in option can work in SPL.

  CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y
  CONFIG_SPL_I2C=y
  CONFIG_SPL_POWER=y
  CONFIG_SPL_PINCTRL=y
  CONFIG_SPL_PMIC_RK8XX=y

  &i2c0 {
  	bootph-pre-ram;
  };

  &rk817 {
  	bootph-pre-ram;

  	regulators {
  		bootph-pre-ram;
  	};
  };

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 16:52:48 +08:00
FUKAUMI Naoki
8952b3857b arm: dts: rockchip: rock-5b: add support for PCIe3 and NVMe
this patch adds support for PCIe3 (M.2 M key) and enables NVMe.

 => pci
 BusDevFun  VendorId   DeviceId   Device Class       Sub-Class
 _____________________________________________________________
 00.00.00   0x1d87     0x3588     Bridge device           0x04
 01.00.00   0x10ec     0x8125     Network controller      0x00
 02.00.00   0x1d87     0x3588     Bridge device           0x04
 03.00.00   0x1179     0x011a     Mass storage controller 0x08
 => nvme scan
 => nvme info
 Device 0: Vendor: 0x1179 Rev: AGHA4101 Prod: 79CA20WPKRYN
             Type: Hard Disk
             Capacity: 488386.3 MB = 476.9 GB (1000215216 x 512)

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 16:49:41 +08:00
FUKAUMI Naoki
74273f1d9c arm: dts: rockchip: sync DT for RK3588 series with Linux
Sync the device tree for RK3588 series with Linux 6.6-rc1.

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 16:49:41 +08:00
Frank Wunderlich
3d96c3f5ec board: rockchip: Add Bananapi R2Pro Board
Add Bananapi R2 Pro board.

tested:
- sdcard
- both front usb-ports
- sata
- wan-port

lan-ports are connected to mt7531 switch where driver needs to be
separated from mtk ethernet-driver.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
2023-10-07 16:49:41 +08:00
Manoj Sai
42a956e9d6 rockchip: Add support to generate LZMA compressed U-boot binary
Add support for generating a LZMA-compressed U-boot binary with the
help of binman, if CONFIG_SPL_LZMA is selected.

Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 16:49:41 +08:00
Manoj Sai
439bd73336 rockchip: Add support to generate GZIP compressed U-boot binary
Add support for generating a GZIP-compressed U-boot binary with the
help of binman, if CONFIG_SPL_GZIP is selected.

Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 16:49:41 +08:00
Massimo Pegorer
9e13fef00b rockchip: Kconfig: Enable external TPL binary for rk3308
There is no support to initialize DRAM on rk3308 SoC using U-Boot
TPL or SPL, and therefore an external TPL binary must be used to
package a bootable u-boot-rockchip.bin image.

Default ROCKCHIP_EXTERNAL_TPL to yes if ROCKCHIP_RK3308.
Remove useless TPL_SERIAL.

Signed-off-by: Massimo Pegorer <massimo.pegorer+oss@gmail.com>
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 16:49:41 +08:00
Jonas Karlman
683f61a13f rockchip: board: Add minimal generic RK3566/RK3568 board
Add a minimal generic RK3566/RK3568 board that only have eMMC and SDMMC
enabled. This defconfig can be used to boot from eMMC or SD-card on most
RK3566/RK3568 boards that follow reference board design.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 16:49:41 +08:00
Jonas Karlman
a9e9445ea2 rockchip: rk3568-nanopi-r5: Enable PCIe on NanoPi R5C and R5S
Enable missing PCIe Kconfig options now that PCIe bifurcation is fixed
to make use of the two on-board RTL8125B and the M.2 slot on NanoPi R5C
and NanoPi R5S.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 10:23:32 +08:00
Jonas Karlman
5b155997d4 rockchip: rk3568-nanopi-r5: Update defconfig for NanoPi R5C and R5S
Update and sync Kconfig options for NanoPi R5C and NanoPi R5S with other
RK3568 boards.

SPL_FIT_SIGNATURE is enabled to add a checksum validation of the FIT
payload, also add LEGACY_IMAGE_FORMAT to keep boot scripts working.

OF_SPL_REMOVE_PROPS, SPL_DM_SEQ_ALIAS and SPL_PINCTRL change ensure
pinctrl for eMMC, SD-card and UART2 is applied in SPL.

MMC_HS200_SUPPORT and SPL counterpart is enabled to speed up eMMC load
times from on-board eMMC 5.1 modules.

Drop remaining unused or unsupported options to sync with other RK3568
boards.

Also sync device tree from linux v6.4 and drop u-boot,spl-boot-order and
use the default from rk356x-u-boot.dtsi.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 10:23:32 +08:00
Simon Glass
f69d3d6d10 pci: serial: Support reading PCI-register size with base
The PCI helpers read only the base address for a PCI region. In some cases
the size is needed as well, e.g. to pass along to a driver which needs to
know the size of its register area.

Update the functions to allow the size to be returned. For serial, record
the information and provided it with the serial_info() call.

A limitation still exists in that the size is not available when OF_LIVE
is enabled, so take account of that in the tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-10-06 14:38:13 -04:00
Simon Glass
97192937bf sandbox: Only read the state if we have a state file
We should not read this unless requested. Make it conditional on the
option being provided.

Add some debugging to show the state being written.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-10-06 14:38:13 -04:00
Simon Glass
d02c6f57ab sandbox: Move reading the RAM buffer into a better place
This should not happen in the argument-parsing function. Move it to the
main program.

Add some debugging for reading/writing.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-10-06 14:38:13 -04:00
Simon Glass
3d6d507514 spl: Use SYS_MALLOC_F instead of SYS_MALLOC_F_LEN
Use the new SPL/TPL/VPL_SYS_MALLOC_F symbols to determine whether the
malloc pool exists.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
2023-10-06 14:38:12 -04:00
Simon Glass
a572041807 tpl: Enable CONFIG_TPL_SYS_MALLOC_F where needed
Enable CONFIG_TPL_SYS_MALLOC_F for boards which have a non-zero value
for CONFIG_TPL_SYS_MALLOC_F_LEN

Note that the default is yes in most cases, so no changes are needed to
board defconfig options.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-10-06 14:38:12 -04:00
Simon Glass
7431b0ad54 spl: Enable CONFIG_SPL_SYS_MALLOC_F where needed
Enable CONFIG_SPL_SYS_MALLOC_F for boards which have a non-zero value
for CONFIG_SPL_SYS_MALLOC_F_LEN

Note that the default is yes in most cases, so no changes are needed to
board defconfig options.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-10-06 14:38:12 -04:00
Simon Glass
9cbdc3a0fc spl: Rename SYS_SPL_ARGS_ADDR to SPL_PAYLOAD_ARGS_ADDR
Rename this so that SPL is first, as per U-Boot convention. Also add
PAYLOAD_ since this is where in memory the parameters for the payload
have been stored.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-10-06 14:38:11 -04:00
Simon Glass
82e26e0d68 spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_...
We like to put the SPL first so it is clear that it relates to SPL. Rename
various malloc-related options which have crept in, to stick to this
convention.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-10-06 14:38:11 -04:00
Tom Rini
be2abe73df Merge https://source.denx.de/u-boot/custodians/u-boot-riscv
+ ae350: modify memory layout and target name
+ ae350: use generic RISC-V timer driver in S-mode
+ Support bootstage report for RISC-V
+ Support C extension exception command for RISC-V
+ Add Starfive timer support
2023-10-05 13:26:44 -04:00
Neha Malcom Francis
69b19ca67b arm: dts: k3-j721e: Sync with v6.6-rc1
Sync k3-j721e DTS with kernel.org v6.6-rc1.

	* Use mcu_timer0 defined in k3-j721e-mcu-wakeup.dtsi and remove
	  timer0, we have its clocks set up in clk-data now
	* Remove hbmc node as support is buggy and needs to be fixed
	* Remove aliases and chosen node, use them from Kernel
	* Remove /delete-property/ and clock-frequency from sdhci,
	  usbss, and mcu_uart nodes as we have them in clk and dev data
	* Remove dummy_clocks as they are not needed
	* Remove cpsw node as it is not required since it has been fixed
	  in U-Boot
	* Remove pcie nodes, they are not needed
	* Remove mcu_i2c0 as it is used for tps659413 PMIC in j721e-sk
	  for which support is not yet added
	* Change secproxy nodes to their Linux definitions
	* Remove overriding of ti,cluster-mode in MAIN R5 to default to
	  lockstep mode same as Kernel
	* Retain tps6594 node as TPS6594 PMIC support is still under
	  review in the Kernel [1], cleanup will be taken post its merge

[1] https://lore.kernel.org/all/20230810-tps6594-v6-0-2b2e2399e2ef@ti.com/

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-10-04 14:16:01 -04:00
Neha Malcom Francis
d73851be43 arm: dts: k3-j721e-r5: Clean up inclusion hierarchy
Get rid of k3-j721e-r5-*-u-boot.dtsi as it is not
necessary. Change the inclusion hierarchy to be as follows:

	k3-j721e-<board>.dts---
			       -
			        -->k3-j721e-r5-<board>.dts
			       -
k3-j721e-<board>-u-boot.dtsi---

Reason for explicitly mentioning the inclusion of -u-boot.dtsi in code
although it could've been automatically done by U-Boot is to resolve
some of the dependencies that R5 file requires.

Also remove duplicate phandles while making this shift as well as remove
firmware-loader as it serves no purpose without "phandlepart" property.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
2023-10-04 14:16:01 -04:00
Neha Malcom Francis
50fa67d091 arm: mach-k3: j721e_init: Move clk_k3 probe before loading TIFS
When setting boot media to load the TIFS binary in legacy boot flow
(followed by J721E), get_timer() is called which eventually calls
dm_timer_init() to grab the tick-timer, which is mcu_timer0. Since we
need to set up the clocks before using the timer, move clk_k3 driver
probe before k3_sysfw_loader to ensure we have all necessary clocks set
up before.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-10-04 14:16:01 -04:00
Neha Malcom Francis
dd0169f033 arm: mach-k3: j721e: dev-data: Add mcu_timer0 ID
U-Boot uses mcu_timer0 as the tick-timer, so add it to device list.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-10-04 14:16:01 -04:00
Nishanth Menon
0cb6515cda arm: dts: k3-am625-beagleplay: Fix Boot
Since commit [1] A53 u-boot proper is broken. This is because nodes
marked as 'bootph-pre-ram' are not available at u-boot proper before
relocation.

To fix this we mark all nodes in u-boot.dtsi as 'bootph-all'.

[1]
9e644284ab ("dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation")

Reported-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
2023-10-04 14:16:01 -04:00
Roger Quadros
6d35682fb6 arm: dts: k3-am625-sk: Mark dependent nodes for pre-relocation phase
CPSW node needs PHY, MDIO, pinmux, DMA and INTC nodes.
main_conf is required for phy_gmii_sel.
Mark them as 'bootph-all' so they are available in all
pre-relocation phases.

Fixes the below dts warnings:

<stdout>: Warning (reg_format): /bus@f0000/syscon@100000/phy@4044:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
<stdout>: Warning (reg_format): /bus@f0000/ethernet@8000000/ethernet-ports/port@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
<stdout>: Warning (unit_address_vs_reg): /bus@f0000/syscon@100000: node has a unit name, but no reg or ranges property
<stdout>: Warning (pci_device_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
<stdout>: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (avoid_default_addr_size): /bus@f0000/syscon@100000/phy@4044: Relying on default #address-cells value
<stdout>: Warning (avoid_default_addr_size): /bus@f0000/syscon@100000/phy@4044: Relying on default #size-cells value
<stdout>: Warning (avoid_default_addr_size): /bus@f0000/ethernet@8000000/ethernet-ports/port@1: Relying on default #address-cells value
<stdout>: Warning (avoid_default_addr_size): /bus@f0000/ethernet@8000000/ethernet-ports/port@1: Relying on default #size-cells value
<stdout>: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
<stdout>: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-10-04 14:16:01 -04:00
Roger Quadros
7e5b6f1cff arm: dts: k3-am625-sk: Fix boot
Since commit [1] A53 u-boot proper is broken.
This is because nodes marked as 'bootph-pre-ram' are
not available at u-boot proper before relocation.

To fix this we mark all nodes in sk-u-boot.dtsi as
'bootph-all'.

[1]
9e644284ab ("dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation")

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-10-04 14:16:01 -04:00
Roger Quadros
2f35889298 arm: dts: k3-am642-sk: Mark dependent nodes for pre-relocation phase
CPSW node needs PHY, MDIO, pinmux, DMA and INTC nodes.
Mark them as 'bootph-all' so they are available in all
pre-relocation phases.

Fixes below dts warnings:

<stdout>: Warning (reg_format): /bus@f4000/ethernet@8000000/mdio@f00/ethernet-phy@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
<stdout>: Warning (unit_address_vs_reg): /bus@f4000/ethernet@8000000/mdio@f00: node has a unit name, but no reg or ranges property
<stdout>: Warning (pci_device_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
<stdout>: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (avoid_default_addr_size): /bus@f4000/ethernet@8000000/mdio@f00/ethernet-phy@1: Relying on default #address-cells value
<stdout>: Warning (avoid_default_addr_size): /bus@f4000/ethernet@8000000/mdio@f00/ethernet-phy@1: Relying on default #size-cells value
<stdout>: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
<stdout>: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
<stdout>: Warning (msi_parent_property): /bus@f4000/bus@48000000/dma-controller@485c0100:msi-parent: Could not get phandle node for (cell 0)
<stdout>: Warning (msi_parent_property): /bus@f4000/bus@48000000/dma-controller@485c0000:msi-parent: Could not get phandle node for (cell 0)
<stdout>: Warning (phys_property): /bus@f4000/ethernet@8000000/ethernet-ports/port@2:phys: Could not get phandle node for (cell 0)

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-10-04 14:16:01 -04:00
Roger Quadros
f3285deeca arm: dts: k3-am642-sk: Fix boot
Since commit [1] A53 u-boot proper is broken.
This is because nodes marked as 'bootph-pre-ram' are
not available at u-boot proper before relocation.

To fix this we mark all nodes in sk-u-boot.dtsi as
'bootph-all'.

Move cbass_mcu node to -r5-sk.dts as it is only required
for R5 SPL.

[1]
9e644284ab ("dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation")

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-10-04 14:16:01 -04:00
Roger Quadros
398bd2965c arm: dts: k3-am64-evm: Mark dependent nodes for pre-relocation phase
CPSW node needs PHY, MDIO, pinmux, DMA and INTC nodes.
USB and MMC nodes need pinmux.

Mark them as 'bootph-all' so they are available in all
pre-relocation phases.

Fixes below dts warning:

<stdout>: Warning (dmas_property): /bus@f4000/ethernet@8000000:dmas: Could not get phandle node for (cell 0)

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-10-04 14:16:01 -04:00
Roger Quadros
c043ba97d8 arm: dts: k3-am64-evm: Fix boot
Since commit [1] A53 u-boot proper is broken.
This is because nodes marked as 'bootph-pre-ram' are
not available at u-boot proper before relocation.

To fix this we mark all nodes in sk-u-boot.dtsi as
'bootph-all'.

Move vtt_supply and cbass_mcu node to -r5-evm.dts as
it is only required for R5 SPL.

[1]
9e644284ab ("dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation")

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-10-04 14:16:01 -04:00
Tom Rini
b83e285866 STM32 MCU:
_ alignment with kernel DT v6.5 for stm32f429 and stm32f746
   _ rework way of displaying ST logo for stm32f746-disco and stm32f769-disco
 
 STM32 MPU:
   _ alignment with kernel DT v6.6-rc1
   _ add RNG support for stm32mp13
   _ add USB, USB boot and stm32prog command support for stm32mp13
   _ add support of USART1 clock for stm32mp1
   _ only print RAM and board code with SPL_DISPLAY_PRINT flag for
     stm32mp1
   _ rename update_sf to dh_update_sd_to_sf and add dh_update_sd_to_emmc
     for stm32mp15xx DHCOR
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmUdaJccHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/ptHxEACdibF5EoRb40qhQCWB
 mwW50s76xWOyHGOGjSe3l18zxPdBjQ+9rnT8/A+mjaa8he4kMX9EZJyYRogcz7eR
 QcnSeu9Q4L8bKbqnPBOpKF6TN7rFOIUcu+BWp3o8jZ+7/q7OSJrVLsjbXtCuCLnB
 q5Pie/in7hmHJsQr6LJ4r31chW6Zm4VDuFiXquuxyE/c94Q8Ue27ag1/RfXL8b/g
 Ir9aO+PAldGnVdnhPz4e6PZhzMfCVafw+DR7GVx3Zfnx2bg/dajo38UaLBDdEIS1
 EIKONU2CBT/W1kPkLFiz+NdaYCzK9EL+RIbN/iG7ms+ds1+wc3zXpWwqZFASfIod
 ZF788Up+wW+3SrKI2ySFjhQroNzDascn+bbHm4yJuAsORqY0XkxjSuWcSz++q8Hs
 eMTw/R4uMfEiDvN1A7xlhBMuBrBHk4/6bdCRx2R6nkWes542fsgjXy8tGRWyUgnY
 nbpTfYU07N8ck6arZ36KThedD7whJHHRcBYtLjhRG+lKbD0epWy67pXgTr9edTLf
 U6ddH+Tndn4qhx067VhZ8vEXTCzypt4lY61MLcM0b9z8S1nJDn8b8jmiii7IR76L
 /ocXzuLvNWHfmwNnB2hj/YY+n78vlZhegUxL5/6sH9lNebnewyEzCkVENNELUSYf
 8M6vEZprvuhN44Z6hBUWZxXk0w==
 =1mUx
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20231004' of https://source.denx.de/u-boot/custodians/u-boot-stm

STM32 MCU:
  _ alignment with kernel DT v6.5 for stm32f429 and stm32f746
  _ rework way of displaying ST logo for stm32f746-disco and stm32f769-disco

STM32 MPU:
  _ alignment with kernel DT v6.6-rc1
  _ add RNG support for stm32mp13
  _ add USB, USB boot and stm32prog command support for stm32mp13
  _ add support of USART1 clock for stm32mp1
  _ only print RAM and board code with SPL_DISPLAY_PRINT flag for
    stm32mp1
  _ rename update_sf to dh_update_sd_to_sf and add dh_update_sd_to_emmc
    for stm32mp15xx DHCOR

[ Fix merge conflict at board/st/common/stm32mp_dfu.c ]
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-04 10:49:30 -04:00
Fabrice Gasnier
46b4d6fe18 ARM: dts: stm32: force b-session-valid for otg on stm32mp135f-dk board
stm32mp135f-dk board has a type-c connector to retrieve the connection
state. For now, simply force an active peripheral mode in u-boot for
flashing.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-10-04 13:32:41 +02:00
Patrice Chotard
f959118b66 ARM: dts: stm32mp: alignment with v6.6-rc1
Device tree alignment with Linux kernel v6.6.rc1.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-10-04 13:32:41 +02:00
Gatien Chevallier
1937fdbd47 ARM: dts: stm32: add RNG node for STM32MP13x platforms
Add RNG node for STM32MP13x platforms.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:03 +02:00
Dario Binacchi
388f872691 ARM: dts: stm32f429: put can2 in secondary mode
commit 6b443faa313c519db755ff90be32758fd9c66453 Linux upstream.

This is a preparation patch for the upcoming support to manage CAN
peripherals in single configuration.

The addition ensures backwards compatibility.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230427204540.3126234-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
3fd60a4f43 ARM: dts: stm32: add pin map for CAN controller on stm32f4
commit 559a6e75b4bcf0fc9e41d34865e72cf742f67d8e Linux upstream.

Add pin configurations for using CAN controller on stm32f469-disco
board. They are located on the Arduino compatible connector CN5 (CAN1)
and on the extension connector CN12 (CAN2).

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230328073328.3949796-5-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
78692e51dd ARM: dts: stm32: add CAN support on stm32f429
commit 7355ad1950f41e755e6dc451834be3b94f82acd4 Linux upstream.

Add support for bxcan (Basic eXtended CAN controller) to STM32F429. The
chip contains two CAN peripherals, CAN1 the primary and CAN2 the secondary,
that share some of the required logic like clock and filters. This means
that the secondary CAN can't be used without the primary CAN.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230328073328.3949796-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
1e4d99549f ARM: dts: stm32: support display on stm32f746-disco board
The patch applies the changes from Linux commit 10a970bc3ebfa ("ARM: dts:
stm32: support display on stm32f746-disco board") and removes the same
settings from stm32f746-disco-u-boot.dtsi.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
f0c76e7731 ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
commit e4e724099f04072053cf411456e3e9aae48c4af1 Linux upstream.

In the schematics of document UM1907, the power supply for the micro SD
card is the same 3v3 voltage that is used to power other devices on the
board. By generalizing the name of the voltage regulator, it can be
referenced by other nodes in the device tree without creating
misunderstandings.

This patch is preparatory for future developments.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
92ddff674d ARM: dts: stm32: add pin map for LTDC on stm32f7
commit ba287d1a0137702a224b1f48673d529257b3c4bf Linux upstream.

Add pin configurations for using LTDC (LCD-tft Display Controller) on
stm32f746-disco board.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
f479f5dbb7 ARM: dts: stm32: add ltdc support on stm32f746 MCU
The patch applies the changes from Linux commit 008ef8b3a1a00 ("Add LTDC
(Lcd-tft Display Controller) support") and removes the same settings
from stm32f746-disco-u-boot.dtsi.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
5b9e395726 ARM: dts: stm32: add touchscreen on stm32f746-disco board
commit f0215440069c4fb12958d2d321e05faa2708a11d Linux upstream.

The patch adds support for touchscreen on the stm32f746-disco board.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
f37cf077ac ARM: dts: stm32: add pin map for i2c3 controller on stm32f7
commit 0637e66f8250c61f75042131fcb7f88ead2ad436 Linux upstream.

Add pin configurations for using i2c3 controller on stm32f7.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
3175c73b04 ARM: dts: stm32: use RCC macro for CRC node on stm32f746
commit 7a5f349e592c254f3c1ac34665b6c3905576efc2 Linux upstream.

The patch replaces the number 12 with the appropriate numerical constant
already defined in the file stm32f7-rcc.h.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
a5fc0bebef ARM: dts: stm32: add CAN support on stm32f746
commit 0920ccdf41e3078a4dd2567eb905ea154bc826e6 Linux upstream.

Add support for bxcan (Basic eXtended CAN controller) to STM32F746. The
chip contains three CAN peripherals, CAN1 and CAN2 in dual peripheral
configuration and CAN3 in single peripheral configuration:
- Dual CAN peripheral configuration:
  * CAN1: Primary bxCAN for managing the communication between a secondary
    bxCAN and the 512-byte SRAM memory.
  * CAN2: Secondary bxCAN with no direct access to the SRAM memory.
  This means that the two bxCAN cells share the 512-byte SRAM memory and
  CAN2 can't be used without enabling CAN1.
- Single CAN peripheral configuration:
  * CAN3: Primary bxCAN with dedicated Memory Access Controller unit and
    512-byte SRAM memory.

 -------------------------------------------------------------------------
| features | CAN1              | CAN2               | CAN 3               |
 -------------------------------------------------------------------------
| SRAM     | 512-byte shared between CAN1 & CAN2    | 512-byte            |
 -------------------------------------------------------------------------
| Filters  | 26 filters shared between CAN1 & CAN2  | 14 filters          |
 -------------------------------------------------------------------------

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230427204540.3126234-6-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
3d82c74be7 ARM: dts: stm32: add pin map for CAN controller on stm32f7
commit 011644249686f2675e142519cd59e81e04cfc231 Linux upstream.

Add pin configurations for using CAN controller on stm32f7.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230427204540.3126234-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Yu Chien Peter Lin
8a0d5f2f51 riscv: andesv5: Prefer using the generic RISC-V timer driver in S-mode
The Andes PLMT driver directly accesses the mtime MMIO region,
indicating its intended use in the M-mode boot stage. However,
since U-Boot proper (S-mode) also uses the PLMT driver, we need
to specifically mark the region as readable through PMPCFGx (or
S/U-mode read-only shared data region for Smepmp) in OpenSBI.

Granting permission for this case doesn't make sense. Instead,
we should use the generic RISC-V timer driver to read the mtime
through the TIME CSR. Therefore, we add the SPL_ANDES_PLMT_TIMER
config, which ensures that the PLMT driver is linked exclusively
against M-mode U-Boot or U-Boot SPL binaries.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
2023-10-04 18:23:54 +08:00
Randolph
b68bf22fbb configs: andes: add vender prefix for target name
Modify "CONFIG_TARGET_AE350" to "CONFIG_TARGET_ANDES_AE350"

Signed-off-by: Randolph <randolph@andestech.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-10-04 18:00:51 +08:00
Heinrich Schuchardt
e637e455ca riscv: enable CONFIG_DEBUG_UART by default
Most boards don't enable the pre-console buffer. So we will not see any
early messages. OpenSBI 1.3 provides us with the debug console extension
that can fill this gap.

For S-Mode U-Boot enable CONFIG_DEBUG_UART by default.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-04 17:59:49 +08:00
Chanho Park
9bcf9e49a2 riscv: bootstage: correct bootstage_report guard
Below warning can be occurred when CONFIG_BOOTSTAGE and
!CONFIG_SPL_BOOTSTAGE. It should be guarded by using CONFIG_IS_ENABLED
for SPL build.

arch/riscv/lib/bootm.c:46:9: warning: implicit declaration of
function 'bootstage_report'
   46 |         bootstage_report();
      |         ^~~~~~~~~~~~~~~~
      |         bootstage_error

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-04 17:55:17 +08:00
Tom Rini
65b9b3462b Merge branch 'next_pinctrl_sync' of https://source.denx.de/u-boot/custodians/u-boot-sh
- pinctrl re-sync for Renesas chips
2023-10-02 15:19:02 -04:00
Tom Rini
ac897385bb Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-02 10:55:44 -04:00
Marek Vasut
2501fd979e ARM: dts: renesas: Synchronize RZ R8A774E1 RZ/G2H DTs with Linux 6.5.3
Synchronize RZ R8A774E1 RZ/G2H DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
be06fe57a3 ARM: dts: renesas: Synchronize RZ R8A774C0 RZ/G2E DTs with Linux 6.5.3
Synchronize RZ R8A774C0 RZ/G2E DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
6da842bbac ARM: dts: renesas: Synchronize RZ R8A774B1 RZ/G2N DTs with Linux 6.5.3
Synchronize RZ R8A774B1 RZ/G2N DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
7177dcf773 ARM: dts: renesas: Synchronize RZ R8A774A1 RZ/G2M DTs with Linux 6.5.3
Synchronize RZ R8A774A1 RZ/G2M DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Adam Ford <aford173@gmail.com>
2023-10-01 00:08:29 +02:00
Marek Vasut
ec2faaab65 ARM: dts: renesas: Synchronize RZ R7S72100 RZ/A1 DTs with Linux 6.5.3
Synchronize RZ R7S72100 RZ/A1 DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
90e6730808 ARM: dts: renesas: Synchronize R-Car R8A779G0 V4H DTs with Linux 6.5.3
Synchronize R-Car R8A779G0 V4H DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
9c61a0fdc2 ARM: dts: renesas: Synchronize R-Car R8A779F0 S4 DTs with Linux 6.5.3
Synchronize R-Car R8A779F0 S4 DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
61128cff1d ARM: dts: renesas: Synchronize R-Car R8A779A0 E3 DTs with Linux 6.5.3
Synchronize R-Car R8A779A0 E3 DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
a9513a0ae5 ARM: dts: renesas: Synchronize R-Car R8A77995 D3 DTs with Linux 6.5.3
Synchronize R-Car R8A77995 D3 DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
a7be3fb54a ARM: dts: renesas: Synchronize R-Car R8A77990 E3 DTs with Linux 6.5.3
Synchronize R-Car R8A77990 E3 DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
f8c24dabda ARM: dts: renesas: Synchronize R-Car R8A77980 V3H DTs with Linux 6.5.3
Synchronize R-Car R8A77980 V3H DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
14fb8dc576 ARM: dts: renesas: Synchronize R-Car R8A77970 V3M DTs with Linux 6.5.3
Synchronize R-Car R8A77970 V3M DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
01e0e5e53d ARM: dts: renesas: Synchronize R-Car R8A77965 M3-N DTs with Linux 6.5.3
Synchronize R-Car R8A77965 M3-N DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
d1051fde6e ARM: dts: renesas: Synchronize R-Car R8A77960 M3-W and R8A77961 M3-W+ DTs with Linux 6.5.3
Synchronize R-Car R8A77960 M3-W and R8A77961 M3-W+ DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
f984d3889c ARM: dts: renesas: Synchronize R-Car R8A77951 H3 DTs with Linux 6.5.3
Synchronize R-Car R8A77951 H3 DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
89932045ef ARM: dts: renesas: Synchronize R-Car R8A7794 E2 DTs with Linux 6.5.3
Synchronize R-Car R8A7794 E2 DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
9ef28a83fe ARM: dts: renesas: Synchronize R-Car R8A7791 M2-W and R8A7793 M2-N DTs with Linux 6.5.3
Synchronize R-Car R8A7791 M2-W and R8A7793 M2-N DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
2a0070b90e ARM: dts: renesas: Synchronize R-Car R8A7790 H2 DTs with Linux 6.5.3
Synchronize R-Car R8A7790 H2 DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
9d59be752c ARM: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs on Salvator-X boards
Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ9031 PHYs on R-Car Gen3 Salvator-X boards. This allows software
to identify the PHY model at any time, regardless of the state of
the PHY reset line.

This is a fix for missed addition of these properties on Salvator-X
boards.

Ported from Linux kernel commit 722d55f3a9bd810f3a1a31916cc74e2915a994ce .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:28 +02:00
Jesse Taube
6ab77bb14f Convert CFG_SYS_UBOOT_START to Kconfig
Commit 65cc0e2a65 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*")
renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UBOOT_START. Unfortunately,
this meant that the value was no longer available to the Makefile. This
caused imxrt to fail to boot. All the other boards that used this
variable were unaffected because they were using the default value
which is CONFIG_TEXT_BASE.

This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default
value to CONFIG_TEXT_BASE.

Suggested-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Suggested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-09-30 15:24:43 -04:00
Heinrich Schuchardt
16dbe3d9d4 riscv: set fdtfile on VisionFive 2
Multiple revisions of the StarFive VisionFive 2 board exist. They can be
identified by reading their EEPROM.

Linux uses two differently named device-tree files. To load the correct
device-tree we need to set $fdtfile to the device-tree file name that
matches the board revision.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Tested-by: Milan P. Stanić <mps@arvanta.net>
2023-09-26 10:43:02 +08:00
Tom Rini
15155ab0a3 Fixes for 2023.10
-----------------
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/17831
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCZQ8y/Q8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76bRnwCeN/lFw2CmKAZLEc+DLpcnAyUiOfgAn2ezNdBX
 cHEPyB+vpft0OQGa/rg7
 =YCX0
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20230923' of https://source.denx.de/u-boot/custodians/u-boot-imx

Fixes for 2023.10
-----------------

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/17831
2023-09-24 17:15:31 -04:00
Tom Rini
90c81f407d buildman file-keeping and build-progress improvements
dm tree enhancement
 adjust meaning of bootph-pre-ram/sram
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmUPQXURHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreY1TAf+LeDzKKMhJmyo5ImQWlKPdFt9UGlWqthL
 PBngUWV7GdQ5Kn+dLmKmySAmnQC4XNid565nJt8okmMfpHYUBhOnrnJmrXTZdDPJ
 lYrpEAR7fTyTTTwjSVFcIXJ56bIT07AUX6jQATh383+Plm0U15tRBMguNsrTy1wL
 EmJBVdeT0BZkpSkJyqAIkVuwjOYP+KSuVCectL5LRIpKtjOA+HmMGmELUirjuL00
 uN2h/uucuSGFnjCmKW4l9sYrxxYgd/zN2Y8SOJwBebKyHxSgyvNdbjZxeG5o3gSS
 ruUSEx4DHYVIRHeDBAnwB4wLdCOqfC2dy0ACReTg0Li+iSQN9qYtEg==
 =Sl3P
 -----END PGP SIGNATURE-----

Merge tag 'dm-next-23sep23' of https://source.denx.de/u-boot/custodians/u-boot-dm into next

buildman file-keeping and build-progress improvements
dm tree enhancement
adjust meaning of bootph-pre-ram/sram
2023-09-24 12:43:00 -04:00
Simon Glass
1e94b46f73 common: Drop linux/printk.h from common header
This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-09-24 09:54:57 -04:00
Simon Glass
ae84514fee kontron_sl28: Use u-boot-update.bin instead of u-boot.update
A '.update' extension does not get preserved by buildman, so change it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Michael Walle <michael@walle.cc>
2023-09-23 12:31:25 -06:00
Fabio Estevam
45651a3d69 imx7: Disable CAAM Job Ring 0
Trying to boot a fitImage after a successful hab_auth_img operation
causes the following error:

 ## Loading kernel from FIT Image at 88000000 ...
   Using 'conf-imx7d-smegw01.dtb' configuration
   Trying 'kernel-1' kernel subimage
     Description:  Linux kernel
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0x8800010c
     Data Size:    9901752 Bytes = 9.4 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80800000
     Entry Point:  0x80800000
     Hash algo:    sha256
     Hash value:   28f8779bbf010780f16dd3d84ecb9b604c44c5c2cf7acd098c264a2d3f68e969
   Verifying Hash Integrity ... sha256Error in SEC deq
   CAAM was not setup properly or it is faulty error!

The reason for this error is that the BootROM uses the CAAM Job Ring 0,
so disable its node in U-Boot to avoid the resource conflict.

imx8m dtsi files also have the Job Ring 0 disable since the following
kernel commit:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch?h=v6.5&id=dc9c1ceb555ff661e6fc1081434600771f29657c

For a temporary solution, disable the Job Ring 0 in imx7s-u-boot.dtsi.

Reported-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-09-23 18:45:34 +02:00
Fabio Estevam
5ae4f74a1b imx: hab: Explain that ivt_offset is optional
The ivt_offset parameter is optional for both hab_auth_img_or_fail
and hab_auth_img commands.

Document it in their usage texts to make it clearer.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-09-23 18:45:34 +02:00
Fabio Estevam
ade6e375c3 imx: hab: Improve the hab_auth_img_or_fail usage text
Split the hab_auth_img_or_fail usage text in two sentences to make it
clearer.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-09-23 18:45:34 +02:00
Eduard Strehlau
2ec9ebc72a imx: hab: Allow hab_auth_img_or_fail to be called without ivt_offset
Since commit ea91031b22 ("imx: hab: extend hab_auth_img to calculate
ivt_offset"), it is possible to call the hab_auth_img command without the
last ivt_offset argument.

Currently, calling hab_auth_img_or_fail without the last
ivt_offset parameter causes a failure and the command usage text is shown.

Fix this problem by adjusting the argc logic to allow
calling hab_auth_img_or_fail with only the address and size parameters.

This way, both hab_auth_img and hab_auth_img_or_fail have the same
behavior with respect to the allowed number of command parameters.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-09-23 18:45:33 +02:00
Oleksandr Suvorov
71dfe179cd mach-imx: bootaux: fix building with disabled bootelf
If CMD_ELF disabled and IMX_BOOTAUX enabled, the u-boot building ends
up with a linking error [1]. Select LIB_ELF to fix the building
issue.

[1]
ld: /tmp/ccaF1rpv.ltrans0.ltrans.o: in function `do_bootaux':
arch/arm/mach-imx/imx_bootaux.c:108: undefined reference to `valid_elf_image'

Fixes: c0f037f6a2 ("mach-imx: bootaux: elf firmware support")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2023-09-23 18:45:33 +02:00
Michal Simek
92271d6104 sandbox: test: Fix typo in test.dts
s/parititon/partition/

Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-09-23 09:00:37 -06:00
Simon Glass
9354330935 x86: coreboot: Record the position of the SMBIOS tables
Make a note of where coreboot installed the SMBIOS tables so that we can
pass this on to EFI.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:05:40 +08:00
Simon Glass
50834884a8 Record the position of the SMBIOS tables
Remember where these end up so that we can pass this information on to
the EFI layer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:05:40 +08:00
Simon Glass
3fef0def84 x86: coreboot: Enable VIDEO_COPY
At least on modern machines the write-back mechanism for the frame buffer
is quite slow when scrolling, since it must read the entire frame buffer
and write it back.

Enable the VIDEO_COPY feature to resolve this problem.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:05:40 +08:00
Simon Glass
9a1447d85e x86: coreboot: Drop USB init on startup
This is very annoying as it is quite slow on many machines. Also, U-Boot
has an existing 'preboot' mechanism to enable this feature if desired.

Drop this code so that it is possible to choose whether to init USB or
not.

Use the existing USE_PREBOOT mechanism instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:05:40 +08:00
Simon Glass
8ebca32b2d x86: Set the CPU vendor in SPL
We don't read this information in 64-bit mode, since we don't have the
macros for doing it. Set it to Intel by default. This allows the TSC timer
to work correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:03:46 +08:00
Simon Glass
2c6b979ec1 x86: coreboot: Rearrange arch_cpu_init()
Init errors in SPL are currently ignored by this function.

Change the code to init the CPU, reporting an error if something is wrong.
After that, look for the coreboot table.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:03:46 +08:00
Simon Glass
7739b2793b x86: coreboot: Document cbmem console struct
Coreboot changed a few years ago to include an overflow flag. Update the
structure to match this.

This comes from coreboot commit:

   6f5ead14b4 ("mb/google/nissa/var/joxer: Update eMMC DLL settings")

Note: There are several implementations of this in coreboot. I have chosen
to follow the one in src/lib/cbmem_console.c

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:03:46 +08:00
Simon Glass
6acc072365 x86: dm: Mark driver model as dead when disabling CAR
When turning off CAR, set the flag to make sure that nothing tries to use
driver model in SPL before jumping to U-Bot proper, since its tables are
in CAR.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:03:46 +08:00