Commit graph

72038 commits

Author SHA1 Message Date
Bin Meng
53a97d22f1 clk: mpfs_clk: Enable DM_FLAG_PRE_RELOC flag
This driver is needed in the pre-relocation phase as the serial
driver depends on it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Tested-by: Padmarao Begari <padmarao.begari@microchip.com>
2021-04-08 15:37:30 +08:00
Bin Meng
e9b62617fa riscv: mpfs-icicle-kit: Increase SYS_MALLOC_F_LEN
The RISC-V architecture default value of CONFIG_SYS_MALLOC_F_LEN
(0x1000) would not provide enough memory for devices like mpfs
clock and ns16550 serial to bind well before relocation.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Tested-by: Padmarao Begari <padmarao.begari@microchip.com>
2021-04-08 15:37:29 +08:00
Bin Meng
9c02e50fa1 timer: sifive_clint: Support the official clint DT bindings
Linux kernel commit a2770b57d083 ("dt-bindings: timer: Add CLINT bindings")
adds the official DT bindings for CLINT, which uses "sifive,clint0"
as the compatible string. "riscv,clint0" is now legacy and has to
be kept for backward compatibility of legacy systems.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-04-08 15:37:29 +08:00
Heinrich Schuchardt
8f0dc4cfd1 riscv: assembler versions of memcpy, memmove, memset
Provide optimized versions of memcpy(), memmove(), memset() copied from
the Linux kernel.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-04-08 15:37:29 +08:00
Heinrich Schuchardt
f709a0b6f9 test: unit test for longjmp
Provide a unit test for the longjmp() library function

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Sean Anderson <seanga2@gmail.com>
2021-04-08 15:37:29 +08:00
Heinrich Schuchardt
a718e2aed5 riscv: simplify longjmp
The value returned by setjmp must be nonzero. If zero is passed as
parameter it must be replaced by 1.

This patch reduces the code size a bit.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-04-08 15:37:29 +08:00
Bin Meng
ae2d9506a3 riscv: sifive: Rename fu540 board to unleashed
In preparation to add SiFive Unmatched board support, let's rename
the existing fu540 board to unleashed.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-04-08 15:37:29 +08:00
Heinrich Schuchardt
be5c442a15 configs: EXT4, FAT, hush shell, env on S-mode MAIX
* enable storing the environment in the SPI flash
* enable EXT4 and FAT file system
* enable hush shell
* run k210_bootcmd as default boot command

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-04-08 15:37:28 +08:00
Sean Anderson
6eef9c9a23 riscv: Remove unused define in maix header
This define was left over from a previous revision, and was never used.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
2021-04-08 15:37:28 +08:00
Sean Anderson
e3282b1bba riscv: Enable watchdog for the k210
This enables the necessary config options.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-08 15:37:28 +08:00
Sean Anderson
b0479d1bf1 riscv: Add watchdog bindings for the k210
This adds the necessary bindings. Most of them are already there.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Acked-by: Rick Chen <rick@andestech.com>
2021-04-08 15:37:27 +08:00
Sean Anderson
97bcdd28ad wdt: dw: Free the clock on error
The clock subsystem requires that clk_free be called on clocks obtained via
clk_get_*.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-08 15:37:27 +08:00
Sean Anderson
4cb0ab4ebc wdt: dw: Enable the clock before using it
The watchdog won't work if the clock isn't enabled.

Fixes: cf89ef8d10
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-08 15:37:27 +08:00
Sean Anderson
7d8394366a wdt: dw: Switch to if(CONFIG()) instead of using #if
This is preferred over #if because the compiler can check syntax even if
the feature is disabled. This cannot be used for CONFIG_CLK because
CONFIG_DW_WDT_CLOCK_KHZ is not defined on all platforms.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-08 15:37:27 +08:00
Sean Anderson
cb57811fbc wdt: dw: Switch to using fls for log2
log_2_n_round_up is only found in arm. fls performs the same job and is
generic.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-08 15:37:27 +08:00
Tom Rini
e9c99db778 Merge branch '2021-04-07-CI-improvements'
- Assorted Azure/GitLab improvements
- Move the Dockerfile used for making containers in CI in to this
  repository.
2021-04-07 15:54:07 -04:00
Tom Rini
a64322548c tools: Integrate the Dockerfile used for CI
Integrate the Dockerfile from
https://source.denx.de/u-boot/gitlab-ci-runner.git as of
commit bc6130d572f1 ("Dockerfile: Remove high UID/GID") and introduce a
short rST on how to build the container.

Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-07 14:47:05 -04:00
Heinrich Schuchardt
b6b35fd2a1 Azure/GitLab: bump OpenSBI version to 0.9
Version 0.9 of OpenSBI provides the system reset extension which allows us
to reset and power off boards without board specific code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-07 14:47:05 -04:00
Tom Rini
4ace446e5e Merge branch '2021-04-07-fs-updates'
- JFFS2 updates
2021-04-07 11:14:13 -04:00
Tom Rini
978a4daba1 pytest: Lower pygit2 requirement
The latest versions of pygit2 are not available in practically any
distribution at this time.  Furthermore, we don't need the latest in
order to run all of our testsuites.  Reduce this version requirement to
something older that meets our needs while still supporting running our
tests on older hosts (and so, test labs).

Reported-by: Tom Warren <twarren@nvidia.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-07 11:13:54 -04:00
Tom Rini
712cc962b7 GitLab: Remove "tags" stanzas
Given the structure of our current GitLab tests, we don't make real use
of the tags.  Furthermore, these tags prevent the automatic usage of the
default GitLab runners.  Remove these tags.

Reported-by: Roger Meier <r.meier@siemens.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-07 11:13:54 -04:00
Tom Rini
31289c7de0 Azure: Rework SH / Renesas job
Now that there is a single SuperH platform, rework the Azure job
slightly.  Azure build time limits mean that we need to split the world
build up still.  Make a single build job for the single Renesas SuperH
platform as well as all of the ARM platforms from Renesas.

Cc: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-07 11:13:54 -04:00
Wagner Popov dos Santos
fc25ffe7d2 JFFS2: fix jffs2 summary datacrc status uninitialized
The function jffs2_1pass_read_inode() was discarding the summary
inodes and dirent because the value in datacrc flag wasn't
initialized in function jffs2_sum_process_sum_data().

This fix initializes the status of all summary records to indicate
that the CRC needs to be verified when they are loaded.

Before this fix, the behaviors produced by the undefined value of
datacrc was:
- Summary's registries were discarded when 'b->datacrc' is equal
  as 'CRC_BAD'.
- Summary's registries were not checked when b->datacrc differs of
  'CRC_BAD' and 'CRC_UNKNOWN'

So, almost all of the time the crc just isn't checked, and in some
cases the registries are discarded.

Signed-off-by: Wagner Popov dos Santos <wpopov@gmail.com>
2021-04-07 10:22:22 -04:00
Wagner Popov dos Santos
610a2cc7a3 JFFS2: fix the reading address over nand's limit
Fixes address violation in functions read_nand_cached() and
read_onenand_cached(). This happens because these functions
try to read a fixed amount
of data even when the offset+length
is above the nand's limit.

Signed-off-by: Wagner Popov dos Santos <wpopov@gmail.com>
2021-04-07 10:22:22 -04:00
Tom Rini
02395fec00 Merge tag 'mmc-2021-4-6' of https://source.denx.de/u-boot/custodians/u-boot-mmc
Update hwpartition usage
Check bootbus's arguments
workaround for erratum A-011334 for fsl_esdhc driver
add pulse width detection workaround for fsl_esdhc driver
Use alias num before checking mmc index when creating device
2021-04-06 22:42:55 -04:00
Tom Rini
2e216be8cf Merge https://source.denx.de/u-boot/custodians/u-boot-usb
- XHCI fixes
2021-04-06 14:11:21 -04:00
Stefan Roese
82e4e198ed usb: xhci: Make debug output better readable and checkpatch clean
This change makes debugging a bit easier as the output is better
readable with the added space. The explicit le16_to_cpu() is not
needed in the output. Also this patch moves the strings into one line
to make the patch checkpatch clean.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
2021-04-06 16:38:58 +02:00
Aaron Williams
cf868772dd usb: xhci: Add missing xhci_readl()
Accessing the xHCI controller registers should be done via the
xhci_readl/writel functions. This patch adds this to a few missing
places.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
2021-04-06 16:38:57 +02:00
Aaron Williams
c1125bad6c usb: hub: Fix usb_get_port_status() for big-endian platforms
Add missing endianness conversions to usb_get_port_status(). This
(amongst others) is necessary to enable the use of USB 3 hubs on
big-endian platforms like MIPS Octeon.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
2021-04-06 16:38:57 +02:00
Tom Rini
1883652c8e - Add MMIO MDIO mux driver
- Add Amlogic G12A MDIO mux driver
 - Add DM_MDIO support for designware ethernet driver
 - Add Amlogic Meson8b and later designware ethernet glue driver
 - Switch all amlogic boards to Amlogic designware ethernet glue driver
 - Switch all amlogic boards to DM_MDIO when necessary
 - Remove all static ethernet setup code
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmBsLu8ACgkQd9zb2sjI
 SdFj4RAArL8OHCGzyAXrV95fnOnl76koOFnJJ0q6PREwvLWQh3GMpN4CBYtAn95a
 nbakXGN30pHlprrRrYi8nsGHWJX2MW1k8hDWGUJ4f+r2AuvCxMT7h3CHbKY0/pKZ
 h8s7Kwy1ze53ljAbQBUnF3anzYJFPpX3nvjbNo2o5ao0gCUNilEuz1RVn2R72v8R
 kp1iZb0bBhMN3mmNeOs670oXyDoRtX4eWyhbAdrTDhofxTvxfRlQJQrxJ6/I90ex
 IueCsRaT40vl9B5I+JJsanJFDPUTFeZIAc/6DchqPVlXxQjLYP/RjUIxaZbAbnFc
 vyXSWYhoK4GAmgNmXzL00VUVLfKvWvMVMncSgRKRqVY+YBkmoFrP4sYbFrZAPqsB
 yaUoWWnuKurWGRiqbEOlvK+AmQ7So0wWLE/cImmHaadpUDFow3JseeMdZphBdaOp
 4BevvSUNE2k8LazXKyPPlm73Po7uDZmTHYc9ADemBjIj0wvdROvgTdbOdtCAPwnv
 sNVP08l51fskueFYKAkWg1/5hu9YEqzb3C+n9QyZoDNmKaGxQ102HH2gHdXkFqBD
 EciaThsIogUOxYzz7zwU4a44bzzQBuh+yp6C4Ixxe9tOyFyknNppontMUUm41Blk
 HzOvBZjzxqpQOnuVfl1k7xORFXGehCnxwLhZvDIoLYhaqFzgLUc=
 =uQEZ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20210406' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

- Add MMIO MDIO mux driver
- Add Amlogic G12A MDIO mux driver
- Add DM_MDIO support for designware ethernet driver
- Add Amlogic Meson8b and later designware ethernet glue driver
- Switch all amlogic boards to Amlogic designware ethernet glue driver
- Switch all amlogic boards to DM_MDIO when necessary
- Remove all static ethernet setup code
2021-04-06 08:37:28 -04:00
Tom Rini
7168bcdefc Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- Enhance WDT handling (starting / stopping) and introduce
  CONFIG_WATCHDOG_AUTOSTART to allow disabling of autostart of
  the WDT (Pali)
2021-04-06 08:37:06 -04:00
Tom Rini
b74f45e2e5 Merge https://source.denx.de/u-boot/custodians/u-boot-cfi-flash
- Fix detection of 8-bit bus flash devices via address shift
2021-04-06 08:36:49 -04:00
Tom Rini
779786dac3 ENOSYS clean-up
Minor dtoc improvements
 Convert CONFIG_MISC_INIT_F to Kconfig
 Allow unit tests to run on any board
 pylibfdt build-rule fix
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmBr+AgRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrebnqQf/dZUk4cpj4q29icFJhAhG3wUkzKdKywWu
 wOwHPIaUIetytpjwKTbkv0cUdel5Jhp9mvnJ2O5cRUZlVdgCH+lEQmFiq1O74Jf5
 IwYBN74xZuP7+rno3ZxuKhjj2ixbpeg2A5R/o7gaevIgtu4vCK71qrj3y+unjnnt
 Rd5BGaVzouMya0lS9cdkrzE1vmuLXs7ZJBvKdppaNda0VScJj+JP3NqooFKRKPU+
 OeyblmtfL5lGOXFdY7Wfjg0pzv5L8fJxDaYDxf6iRWWG/X6RO6zV26MWAo28Ga+J
 E3fuvl0mBqr1eAg3Cf17j4s9gRZv1tMtS6Mol1scIcBrldalVFA44g==
 =x75X
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-6apr21' of https://source.denx.de/u-boot/custodians/u-boot-dm

ENOSYS clean-up
Minor dtoc improvements
Convert CONFIG_MISC_INIT_F to Kconfig
Allow unit tests to run on any board
pylibfdt build-rule fix
2021-04-06 08:36:11 -04:00
Aswath Govindraju
2243d19e56 mmc: mmc-uclass: Use dev_seq() to read aliases node's index
Use dev_seq() to read aliases node's index and pass it as device number
for creating bulk device.

Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-06 18:36:39 +08:00
Aswath Govindraju
2153a08a24 mmc: Check for device with a seq number equal to num before checking against index
First check if there is an alias for the device tree node defined with the
given num before checking against device index.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-06 18:36:27 +08:00
Michael Walle
1fc9346af4 board: sl28: enable HS400 mode again
Now that it is working reliable on the LS1028A SoC, reenable support for
it.

Signed-off-by: Michael Walle <michael@walle.cc>
2021-04-06 18:36:11 +08:00
Michael Walle
d3b745f7d0 mmc: fsl_esdhc: add pulse width detection workaround
HS400 mode on the LS1028A SoC isn't reliable. The linux driver has a
workaroung for the pulse width detection. Apply this workaround in
u-boot, too.

This will make HS400 mode work reliably on the LS1028A SoC.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-06 18:36:04 +08:00
Michael Walle
bd7b8505f2 mmc: fsl_esdhc: add workaround for erratum A-011334
LS1028A SoCs are restricted in what divider values are allowed for HS400
mode. This is basically a port from the corresponding linux driver.

Signed-off-by: Michael Walle <michael@walle.cc>
2021-04-06 18:35:55 +08:00
Jaehoon Chung
e9978b17cd cmd: mmc: check whether bootbus's arguments is valid or not
According to Specification, each bit have valid value.
But it doesn't check whether arguments is valid or not.
It has potential bug with arguments passed by wrong value.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-06 18:08:26 +08:00
Jaehoon Chung
8ae82c4b12 cmd: mmc: modify more readable about hwpartition usage
Modified more readable about hwpartition usage.
Because it's difficult to understand how to use its command.
The arguments didn't optional.
mmc hwpartition needs to pass <USER> <GP> <MODE> as arguments.
Description about each arguments what is required is the below:
 USER - <user> <enh> <start> <cnt> <wrrel> <{on|off}>
 GP   - <{gp1|gp2|gp3|gp4}> <cnt> <enh> <wrrel> <{on|off}>
 MODE - <{check|set|complete}>

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-06 18:08:14 +08:00
Neil Armstrong
2fbd37001c arm: meson: remove static ethernet link setup
The static ethernet link type config code is no more needed because now handled by
the meson8b glue driver, delete it.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06 11:10:29 +02:00
Neil Armstrong
775998d451 arm: meson: remove static ethernet memory power domain enable
The ethernet memory power domain is handled by the meson-ee-pwrc driver,
delete the static code.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06 11:10:29 +02:00
Neil Armstrong
6f3cd174a3 net: designware: remove amlogic compatibles
These compatibles are now handled by the dwmac_meson8b glue driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06 11:10:29 +02:00
Neil Armstrong
888422ea17 configs: meson: use Designware glue driver for Amlogic Meson8b & later SoCs
Use the proper Synopsys DWMAC Meson8b glue to handle the ethernet link type.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06 11:10:29 +02:00
Neil Armstrong
81233abf73 arm: meson: remove static MDIO mux handling
The static MDIO mux handling in mach-meson is no more needed, delete it.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06 11:10:29 +02:00
Neil Armstrong
1f636d8cb1 configs: update Amlogic Meson G12A, G12B & SM1 configs for MDIO MUX
Use DM_MDIO and the new G12A MDIO MUX driver for G12A, G12B & SM1 boards.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06 11:10:29 +02:00
Neil Armstrong
6950ba4680 configs: update Amlogic Meson GXL & GXM config for MDIO MUX
Use DM_MDIO and the new MMIOREG MDIO MUX driver for GXL & GXM board.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06 11:10:29 +02:00
Neil Armstrong
798424e857 net: designware: add Amlogic Meson8b & later glue driver
This adds a proper glue driver for the Designware DWMAC ethernet MAC IP
found in the Amlogic Meson8, GXBB, GXL, GXM, G12A, G12B & SM1 SoCs.

This is aimed to replace the static ethernet link setup found on the board
init code for the Amlogic SoC based boards.

Tested on a libretech-cc (S905x Internal RMII 10/100 PHY) and Khadas VIM3 (A113d
with external 10/100/1000 RGMII PHY) to cover the most extreme setups.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06 11:10:29 +02:00
Neil Armstrong
8120ce17bf net: add Amlogic Meson G12A MDIO MUX driver
The Amlogic G12A & compatible SoCs embeds a mux to either communicate with
the external PHY or the internal 10/100 PHY.

This adds support for this mux as a MDIO MUX device.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-06 11:10:29 +02:00
Neil Armstrong
5160b4567c net: designware: add DM_MDIO support
Add support for DM_MDIO to connect to PHY and expose a MDIO device for the
internal MDIO bus in order to dynamically connect to MDIO PHYs with DT
with eventual MDIO muxes in between.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-06 11:10:29 +02:00