Commit graph

51 commits

Author SHA1 Message Date
Sumit Garg
0ddabb6830 arm: dts: qcom: Sync pinctrl DT nodes with Linux bindings
Currently for all Qcom SoCs/boards there are separate compatibles for
GPIO and pinctrl. But this is inconsistent with official (upstream) Linux
bindings which requires only a single compatible "qcom,<SoC name>-pinctrl"
and there is no such compatible property as "qcom,tlmm-<SoC name>".

So fix this inconsistency for Qcom SoCs in order to comply with upstream
DT bindings. This is done via removing compatibles from "msm_gpio" driver
and via binding to "msm_gpio" driver from pinctrl driver in case
"gpio-controller" property is specified for pinctrl node.

Suggested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26 10:55:46 -04:00
Sumit Garg
a4b99582bb pinctrl: sdm845: Remove redundant CONFIG_SDM845 check
DT compatible is sufficient to make platform specific differentiation,
so remove redundant CONFIG_SDM845 check.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-08-26 10:55:46 -04:00
Sumit Garg
968597b85c clocks: qcs404: Add support for USB clocks
Add support for USB controller and PHY clocks for QCS404 SoC.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26 10:55:45 -04:00
Sumit Garg
c9e384e9b6 clocks: qcom: Add clock enable callback support
Drivers like USB, ethernet etc. uses ".enable" hook to enable clocks.
So add corresponding support for Qcom clock drivers.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26 10:55:45 -04:00
Sumit Garg
bf95d17809 board: qualcomm: Add support for QCS404 EVB
Add support for Qualcomm QCS404 SoC based evaluation board.

Features:
- Qualcomm Snapdragon QCS404 SoC
- 1GiB RAM
- 8GiB eMMC, uSD slot

U-boot is chain loaded by ABL in 64-bit mode as part of boot.img.
For detailed build and boot instructions, refer to
doc/board/qualcomm/qcs404.rst.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-07-25 13:02:04 -04:00
Sumit Garg
a4a9d9e874 clocks: qcom: Add clock driver for QCS404 SoC
Currently this clock driver initializes clocks for UART and eMMC. Along
with this import "qcom,gcc-qcs404.h" header from Linux mainline to
support DT bindings.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-07-25 13:02:04 -04:00
Sumit Garg
a8effc2ee4 pinctrl: qcom: Add pinctrl driver for QCS404 SoC
Currently this pinctrl driver only supports BLSP UART2 specific pin
configuration.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-07-25 13:02:04 -04:00
Sumit Garg
d35b211374 board: qualcomm: Add support for dragonboard845c
Add support for 96Boards Dragonboard 845C aka Robotics RB3 development
platform. This board complies with 96Boards Open Platform Specifications.

Features:
- Qualcomm Snapdragon SDA845 SoC
- 4GiB RAM
- 64GiB UFS drive

U-boot is chain loaded by ABL in 64-bit mode as part of boot.img.
For detailed build and boot instructions, refer to
doc/board/qualcomm/sdm845.rst, board: dragonboard845c.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-07-25 13:02:04 -04:00
Sumit Garg
ffa7928719 clocks: sdm845: Import qcom,gcc-sdm845.h
Rather than using magic numbers as clock ids for peripherals import
qcom,gcc-sdm845.h from Linux to be used standard macros for clock ids.
So start using corresponding clk-id macro for debug UART.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-07-25 13:02:04 -04:00
Dzmitry Sankouski
80565ec6f0 board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) board
Samsung S9 SM-G9600 - Snapdragon SDM845 version of the phone,
for China \ Hong Kong markets.
Has unlockable bootloader, unlike SM-G960U (American market version),
which allows running u-boot as a chain-loaded bootloader.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2021-10-31 11:25:38 -04:00
Dzmitry Sankouski
4cbc16ceb2 SoC: qcom: add support for SDM845
Hi-end qualcomm chip, introduced in late 2017.
Mostly used in flagship phones and tablets of 2018.
Features:
- arm64 arch
- total of 8 Kryo 385 Gold / Silver cores
- Hexagon 685 DSP
- Adreno 630 GPU

Tested only as second-stage bootloader.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Stephan Gerhold <stephan@gerhold.net>
2021-10-31 08:46:44 -04:00
Dzmitry Sankouski
90496afc27 clocks: qcom: add clocks for SDM845 debug uart
Allows to change clock frequency of debug uart,
thus supporting wide range of baudrates.
Enable / disable functionality is not implemented yet.
In most use cases of SDM845 (i.e. mobile phones and tablets)
it's not needed, because qualcomm first stage bootloader leaves it
initialized, and on the other hand there's no possibility to
replace signed first stage bootloader with u-boot.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2021-10-31 08:46:44 -04:00
Dzmitry Sankouski
7964c30541 pinctrl: qcom: add pinctrl and gpio drivers for SDM845 SoC
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Stephan Gerhold <stephan@gerhold.net>
[trini: Add CONFIG_SDM845 around sdm845_data usage]
2021-10-31 08:46:44 -04:00
Wolfgang Denk
66356b4c06 WS cleanup: remove trailing empty lines
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30 08:08:56 -04:00
Stephan Gerhold
15dd941202 arm: mach-snapdrgon: misc: Simplify msm_generate_mac_addr()
The logic in msm_generate_mac_addr() was originally taken from the LK
bootloader where the serial number is a string and must be parsed first.
However, in U-Boot msm_board_serial() returns an u32 and
msm_generate_mac_addr() has quite complicated code that will first
print it as a hex string and then immediately parse it again.

What this function actually does at the end is to put the serial number
encoded as big endian (the order used for the hex string) into the u8 *mac.
Use put_unaligned_be32() to do that with bit shifts instead of going
through the string format.

This should be slightly more efficient and cleaner but does not result
in any functional difference.

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-09-02 09:48:20 -04:00
Stephan Gerhold
1eb006249e arm: mach-snapdragon: misc: Initialize eMMC if necessary
At the moment U-Boot produces an empty MAC address (02:00:00:00:00:00)
if the eMMC is not used by anything in U-Boot (e.g. with
CONFIG_ENV_IS_NOWHERE=y instead of having the environment on eMMC).
This happens because then there is nothing that actually initializes
the eMMC and reads the "cid" that is later accessed.

To fix this, call mmc_init() to ensure the eMMC is initialized.
There is no functional difference if the eMMC is already initialized
since then mmc_init() will just return without doing anything.

Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-09-02 09:48:20 -04:00
Simon Glass
7e5f460ec4 global: Convert simple_strtoul() with hex to hextoul()
It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02 13:32:14 -04:00
Stephan Gerhold
0204d1b56b board: dragonboard410c: Load U-Boot directly without LK
At the moment the U-Boot port for the DragonBoard 410c is designed
to be loaded as an Android boot image after Qualcomm's Little Kernel (LK)
bootloader. This is simple to set up but LK is redundant in this case,
since everything done by LK can be also done directly by U-Boot.

Dropping LK entirely has at least the following advantages:
  - Easier installation/board code (no need for Android boot images)
  - (Slightly) faster boot
  - Boot directly in 64-bit without a round trip to 32-bit for LK

So far this was not possible yet because of unsolved problems:

  1. Signing tool: The firmware expects a "signed" ELF image with extra
     (Qualcomm-specific) ELF headers, usually used for secure boot.
     The DragonBoard 410c does not have secure boot by default but the
     extra ELF headers are still required.

  2. PSCI bug: There seems to be a bug in the PSCI implementation
     (part of the TrustZone/tz firmware) that causes all other CPU cores
     to be started in 32-bit mode if LK is missing in the boot chain.
     This causes Linux to hang early during boot.

There is a solution for both problems now:

  1. qtestsign (https://github.com/msm8916-mainline/qtestsign)
     can be used as a "signing" tool for U-Boot and other firmware.

  2. A workaround for the "PSCI bug" is to execute the TZ syscall when
     entering U-Boot. That way PSCI is made aware of the 64-bit switch
     and starts all other CPU cores in 64-bit mode as well.

Simplify the dragonboard410c board by removing all the extra code that
is only used to build an Android boot image that can be loaded by LK.
This allows dropping the custom linker script, special image magic,
as well as most of the special build/installation instructions.

CONFIG_REMAKE_ELF is used to build a new ELF image that has both U-Boot
and the appended DTB combined. The resulting u-boot.elf can then be
passed to the "signing" tool (e.g. qtestsign).

The PSCI workaround is placed in the "boot0" hook that is enabled
with CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK. The extra check for EL1 allows
compatibility with custom firmware that enters U-Boot in EL2 or EL3,
e.g. qhypstub (https://github.com/msm8916-mainline/qhypstub).

As a first step these changes apply only to DragonBoard410c.
Similar changes could likely also work for the DragonBoard 820c.

Note that removing LK wouldn't be possible that easily without a lot of
work already done three years ago by Ramon Fried. A lot of missing
initialization, pinctrl etc was already added back then even though
it was not strictly needed yet.

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-07-23 18:53:45 -04:00
Stephan Gerhold
548b89f8ad arm: mach-snapdragon: pinctrl: Place pin_name in .data section
According to arch/arm/lib/crt0_64.S, the BSS section is "UNAVAILABLE"
and uninitialized before relocation. Also, it overlaps with the
appended DTB before relocation, so writing data into a variable
in the BSS section might corrupt the appended DTB.

Unfortunately, pinctrl-apq8016.c and pinctrl-apq8096.c do place the
"pin_name" variable in the BSS section (since it's uninitialized).
It's also used before relocation, when setting up the pinctrl for
the serial driver.

On DB410c this causes "GPIO_5" to be written into some part of an
appended DTB, e.g.:

80111820: edfe0dd0 9f100000 38000000 c00e0000    ...........8....
80111830: 28000000 11000000 10000000 00000000    ...(............
80111840: 4f495047 8800355f 00000000 00000000    GPIO_5..........
80111850: 00000000 00000000 01000000 00000000    ................
80111860: 03000000 04000000 00000000 02000000    ................
80111870: 03000000 04000000 0f000000 02000000    ................
80111880: 03000000 2d000000 1b000000 6c617551    .......-....Qual
80111890: 6d6d6f63 63655420 6c6f6e68 6569676f    comm Technologie

Depending on the part of the DTB that is corrupted this might not
cause any problems, but it can also result in strange reboots
without any serial output.

Fortunately, in practice this does not cause issues on DB410c yet
because board_fdt_blob_setup() in dragonboard410c.c currently
overrides the appended DTB with the one passed by the previous
bootloader (LK) (which does not get corrupted).

DB820c does not have board_fdt_blob_setup() so I would expect it to
be affected by this problem. Perhaps everyone was just fortunate to
not compile an U-Boot configuration where the pin_name corrupts an
important part of the DTB.

Make sure "pin_name" is explicitly placed in the .data section
instead of .bss to fix this.

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-07-14 16:48:01 -04:00
Sheep Sun
6d430e11a8 arm: snapdragon: Fix typo in clk_bcr_update()
Fix typo in clock-snapdragon.c

Signed-off-by: Sheep Sun <sunxiaoyang2003@gmail.com>
2021-07-06 14:12:15 -04:00
Sheep Sun
9b6b25c635 arm: snapdragon: Use correct GICC register on APQ8016
The GICC register used by u-boot is 0x0a20c000, which is actually a GICC
for WCNSS, the WLAN processor. U-boot runs on the Application Processor,
therefore it should use APCS GICC instead. Hence, correct it with APCS GICC
register address.

Signed-off-by: Sheep Sun <sunxiaoyang2003@gmail.com>
2021-07-06 14:12:15 -04:00
Simon Glass
401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00
Simon Glass
41575d8e4c dm: treewide: Rename auto_alloc_size members to be shorter
This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 08:00:25 -07:00
Masahiro Yamada
2548493ab4 treewide: convert devfdt_get_addr() to dev_read_addr()
When you enable CONFIG_OF_LIVE, you will end up with a lot of
conversions.

To generate this commit, I used coccinelle excluding drivers/core/,
include/dm/, and test/

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  expression dev;
  @@
  -devfdt_get_addr(dev)
  +dev_read_addr(dev)
  </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-25 14:46:57 -06:00
Tom Rini
7208396bbf Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"
This reverts commit 5d3a21df66, reversing
changes made to 56d37f1c56.

Unfortunately this is causing CI failures:
https://travis-ci.org/github/trini/u-boot/jobs/711313649

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24 08:42:06 -04:00
Masahiro Yamada
60e7fa8b3b treewide: convert devfdt_get_addr() to dev_read_addr()
When you enable CONFIG_OF_LIVE, you will end up with a lot of
conversions.

To generate this commit, I used coccinelle excluding drivers/core/,
include/dm/, and test/

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  expression dev;
  @@
  -devfdt_get_addr(dev)
  +dev_read_addr(dev)
  </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-20 11:37:47 -06:00
Simon Glass
cd93d625fd common: Drop linux/bitops.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
Simon Glass
e6f6f9e648 common: Drop part.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Jan-Christoph Tebbe
740370282e mach-snapdragon: Fix overwriting last digit of serial number
When generating the MAC address based on the boards serial number
the last digit was overwritten with the null termination. That way
boards with serial numbers close to each other would use the same
MAC address.

Signed-off-by: Jan-Christoph Tebbe <Jan-Christoph.Tebbe@ithinx.io>
2020-04-03 11:47:47 -04:00
Ramon Fried
ea7bf8fb08 arm: mach-snapdragon: pinctrl: clarify gpio disable bit
The TLMM_GPIO_ENABLE bit is actually use to disable
the GPIO. change it to TLMM_GPIO_DISABLE so it's clearer.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2019-01-25 12:12:56 -05:00
Ramon Fried
94268f1ab2 arm: mach-snapdragon: add pinctrl driver for db820c
Add pinctrl driver for Dragonboard820c, currently with only
one mux func to initialize pins for serial console.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2019-01-25 12:12:55 -05:00
Ramon Fried
604aa9d30b arm: mach-snapdragon: db820c: Actually init PLL for serial
The PLL for the UART was not set, and relied on previous
initializtion made by LK. add the appropriate initialization.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2019-01-25 12:12:55 -05:00
Ramon Fried
8d24a4776a mach-snapdragon: db410: pinctrl: fix pin count
Pin count in APQ8016 was wrong, fix that.

Fixes: ad97051b7f ("mach-snapdragon: Introduce pinctrl driver")
Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2019-01-18 09:16:15 -05:00
Ramon Fried
2df573e6a5 db410c: serial# env using msm board serial
The serial# environment variable needs to be
defined so it will be used by fastboot as serial
for the endpoint descriptor.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30 13:00:35 -04:00
Ramon Fried
e0b04a1525 snapdragon: added MAC generation functions
Add support for generation of unique MAC address
that is derived from board serial.
Algorithm for generation of MAC taken from LK.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-08-13 14:04:04 -04:00
Ramon Fried
86e5e42946 snapdragon: added msm_board_serial() func
This commit adds a function to get the board
serial number.
In snapdragon it's actually the eMMC serial number.

Function added in a new file misc.c that will
include further snapdragon miscellaneous functions.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-08-13 14:04:04 -04:00
Ramon Fried
36adb7c9e8 snapdragon: Add DRAM detection & FDT fixup
Fixup the Linux FDT with the detection of onboard DRAM as
provided by SBL (Secondary boot loader) by reading
the shared-memory region.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-08-10 13:45:35 -04:00
Ramon Fried
f035526624 mach-snapdragon: increase size of malloc pool
Pool size must be increased to support new additionals
drivers.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-05-29 11:01:37 -04:00
Ramon Fried
ad97051b7f mach-snapdragon: Introduce pinctrl driver
This patch adds pinmux and pinctrl driver for TLMM
subsystem in snapdragon chipsets.
Currently, supporting only 8016, but implementation is
generic and 8096 can be added easily.

Driver is using the generic dt-bindings and doesn't
introduce any new bindings (yet).

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-26 18:19:16 -04:00
Ramon Fried
640dc34942 mach-snapdragon: Fix UART clock flow
UART clock enabling flow was wrong.
Changed the flow according to downstream implementation in LK.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-05-26 18:19:11 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Jorge Ramirez-Ortiz
4b684a6b82 db820c: add qualcomm dragonboard 820C support
This commit adds support for 96Boards Dragonboard820C.

The board is based on APQ8086 Qualcomm Soc, complying with the
96Boards specification.

Features
 - 4x Kyro CPU (64 bit) up to 2.15GHz
 - USB2.0
 - USB3.0
 - ISP
 - Qualcomm Hexagon DSP
 - SD 3.0 (UHS-I)
 - UFS 2.0
 - Qualcomm Adreno 530 GPU
 - GPS
 - BT 4.2
 - Wi-Fi 2.4GHz, 5GHz (802.11ac)
 - PCIe 2.0
 - MIPI-CSI, MIPI-DSI
 - I2S

U-Boot boots chained from LK (LK implements the fastboot protocol) in
64-bit mode.

For detailed build instructions see readme.txt in the board directory.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 16:29:02 -05:00
Jorge Ramirez-Ortiz
7c75f7f1b2 arm: mach-snapdragon: refactor clock driver
In preparation to add support for the Dragonboard820c (APQ8096),
refactor the current Snapdragon clock driver.

No new functionality has been added.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2018-01-15 16:29:02 -05:00
Simon Glass
a821c4af79 dm: Rename dev_addr..() functions
These support the flat device tree. We want to use the dev_read_..()
prefix for functions that support both flat tree and live tree. So rename
the existing functions to avoid confusion.

In the end we will have:

   1. dev_read_addr...()    - works on devices, supports flat/live tree
   2. devfdt_get_addr...()  - current functions, flat tree only
   3. of_get_address() etc. - new functions, live tree only

All drivers will be written to use 1. That function will in turn call
either 2 or 3 depending on whether the flat or live tree is in use.

Note this involves changing some dead code - the imx_lpi2c.c file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:01 -06:00
Max Filippov
b25732c22b drivers/sysreset: group sysreset drivers
Create drivers/sysreset and move sysreset-uclass and all sysreset
drivers there.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-08-12 09:22:17 -04:00
York Sun
cd4b0c5fea armv8: mmu: Add support of non-identical mapping
Introduce virtual and physical addresses in the mapping table. This change
have no impact on existing boards because they all use idential mapping.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-07-15 09:01:43 -07:00
Stephen Warren
135aa95002 clk: convert API to match reset/mailbox style
The following changes are made to the clock API:
* The concept of "clocks" and "peripheral clocks" are unified; each clock
  provider now implements a single set of clocks. This provides a simpler
  conceptual interface to clients, and better aligns with device tree
  clock bindings.
* Clocks are now identified with a single "struct clk", rather than
  requiring clients to store the clock provider device and clock identity
  values separately. For simple clock consumers, this isolates clients
  from internal details of the clock API.
* clk.h is split so it only contains the client/consumer API, whereas
  clk-uclass.h contains the provider API. This aligns with the recently
  added reset and mailbox APIs.
* clk_ops .of_xlate(), .request(), and .free() are added so providers
  can customize these operations if needed. This also aligns with the
  recently added reset and mailbox APIs.
* clk_disable() is added.
* All users of the current clock APIs are updated.
* Sandbox clock tests are updated to exercise clock lookup via DT, and
  clock enable/disable.
* rkclk_get_clk() is removed and replaced with standard APIs.

Buildman shows no clock-related errors for any board for which buildman
can download a toolchain.

test/py passes for sandbox (which invokes the dm clk test amongst
others).

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-06-19 17:05:55 -06:00
Stephen Warren
1163625898 Rename reset to sysreset
The current reset API implements a method to reset the entire system.
In the near future, I'd like to introduce code that implements the device
tree reset bindings; i.e. the equivalent of the Linux kernel's reset API.
This controls resets to individual HW blocks or external chips with reset
signals. It doesn't make sense to merge the two APIs into one since they
have different semantic purposes. Resolve the naming conflict by renaming
the existing reset API to sysreset instead, so the new reset API can be
called just reset.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-05-26 20:48:31 -06:00
Mateusz Kulikowski
626f048bbc board: Add Qualcomm Dragonboard 410C support
This commit add support for 96Boards Dragonboard410C.
It is board based on APQ8016 Qualcomm SoC, complying with
96boards specification.
Features (present out of the box):
- 4x Cortex A53 (ARMv8)
- 2x USB Host port
- 1x USB Device port
- 4x LEDs
- 1x HDMI connector
- 1x uSD connector
- 3x buttons (Power, Vol+, Vol-/Reset)
- WIFI, Bluetooth with integrated antenna
- 8GiB eMMC

U-Boot boots chained with fastboot in 64-bit mode.
For detailed build instructions see readme.txt in board directory.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:27 -04:00