Commit graph

186 commits

Author SHA1 Message Date
Tom Rini
4c97c8cd42 powerpc: Switch to using CONFIG_SYS_INIT_SP_OFFSET from CONFIG_SYS_GBL_DATA_OFFSET
In the places where PowerPC references CONFIG_SYS_GBL_DATA_OFFSET it
does so as (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET).  And
it defines CONFIG_SYS_GBL_DATA_OFFSET in the same manner that other
architectures define CONFIG_SYS_INIT_SP_OFFSET. Other architectures
define CONFIG_SYS_INIT_SP_ADDR as (CONFIG_SYS_INIT_RAM_ADDR +
CONFIG_SYS_INIT_SP_OFFSET) typically.  Rename things within PowerPC for
consistency with other architectures.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:12 -04:00
Tom Rini
388de0fa8b Convert CONFIG_DIMM_SLOTS_PER_CTLR to Kconfig
This converts the following to Kconfig:
   CONFIG_DIMM_SLOTS_PER_CTLR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
e4d741f8ab Convert CONFIG_SYS_MONITOR_BASE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MONITOR_BASE

Note that for how this is re-used on some PowePC platforms, we introduce
CONFIG_SPL_SYS_MONITOR_BASE and CONFIG_TPL_SYS_MONITOR_BASE and use the
CONFIG_VAL macro to get the correct value at build time, in the code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
11f077bb20 mpc8548cds: Rework CONFIG_LEGACY usage
This CONFIG option is used in one place, so pick a more direct name and
migrate to Kconfig.  Rework the code slightly.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
0e14cdfaf3 Convert CONFIG_ETHPRIME to Kconfig
This converts the following to Kconfig:
   CONFIG_ETHPRIME

This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME
similar to other options that are not always set and control environment
variables.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
5d6a64f71d Remove CONFIG_HAS_ETH0 et al symbols
This converts removes the following symbols:
   CONFIG_HAS_ETH0
   CONFIG_HAS_ETH1
   CONFIG_HAS_ETH2
   CONFIG_HAS_ETH3

This is because at this point, only the ids8313 platform was using the
code which was controlled by these symbols.  In turn, this code already
performs error checking on being able to perform the device tree fixup.
Rather than convert these to Kconfig for a single platform, update the
code to not need these checks and remove them from all the platforms
they were unused on.

Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
f9147d636c Convert CONFIG_CHIP_SELECTS_PER_CTRL to Kconfig
This converts the following to Kconfig:
   CONFIG_CHIP_SELECTS_PER_CTRL

Cc: Alison Wang <alison.wang@nxp.com>
Cc: Pramod Kumar <pramod.kumar_1@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03 16:51:20 -05:00
Tom Rini
a542e4307d Convert CONFIG_BOOTP_MAY_FAIL et al to Kconfig
This converts the following to Kconfig:
   CONFIG_BOOTP_MAY_FAIL
   CONFIG_BOOTP_VENDOREX
   CONFIG_BOOTP_BOOTFILESIZE
   CONFIG_BOOTP_NISDOMAIN
   CONFIG_BOOTP_TIMEOFFSET

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03 16:51:20 -05:00
Tom Rini
fdfb17b1f5 Convert CONFIG_BOOTFILE to Kconfig
This converts the following to Kconfig:
   CONFIG_BOOTFILE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03 16:51:20 -05:00
Tom Rini
a3041d934f Convert CONFIG_BTB to Kconfig
This converts the following to Kconfig:
   CONFIG_BTB

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03 16:51:19 -05:00
Patrick Delaunay
0f9595b9fa configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig
Use moveconfig.py script to convert define CONFIG_SYS_MAX_FLASH_BANKS
and CONFIG_SYS_MAX_FLASH_BANKS_DETECT to Kconfig and move these entries
to defconfigs.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
[trini: Re-switch to IS_ENABLED check in spi-nor-core.c, re-run migration]
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-21 14:01:35 -05:00
Tom Rini
2f8a6db5d8 Finish conversion of CONFIG_SYS_CLK_FREQ to Kconfig
In order to finish moving this symbol to Kconfig for all platforms, we
need to do a few more things.  First, for all platforms that define this
to a function, introduce CONFIG_DYNAMIC_SYS_CLK_FREQ, similar to
CONFIG_DYNAMIC_DDR_CLK_FREQ and populate clock_legacy.h.  This entails
also switching all users from CONFIG_SYS_CLK_FREQ to get_board_sys_clk()
and updating a few preprocessor tests.

With that done, all platforms that define a value here can be converted
to Kconfig, and a fall-back of zero is sufficiently safe to use (and
what is used today in cases where code may or may not have this
available).  Make sure that code which calls this function includes
<clock_legacy.h> to get the prototype.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
e4c3ce7e28 CONFIG_SYS_CLK_FREQ: Consistently be static or get_board_sys_clk()
This CONFIG option is used in one of two ways.  The first way is that it
is defined to a static value, of an unsigned long size.  The second way
is that it is defined to something, typically a function, to determine
this value at run time.

However, in a few cases that function returns a static value.  Change
that to using the static value directly.

In the case of using something at run time, convert everything to using
a function of the same name and prototype.  This will allow for further
cleanups.

Finally, we have a few cases where the function is just not used, so
drop it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
7856cd5a6d Convert CONFIG_SYS_PCI_64BIT to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_PCI_64BIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:17 -05:00
Tom Rini
3847ba94f0 Finish converting CONFIG_WATCHDOG, HW_WATCHDOG and WDT to Kconfig
Because of how these symbols work, and the remaining board config.h file
uses, we need to do these at the same time.  In some cases we just get
to move rather directly to the defconfigs.  A few cases require manual
intervention.

For the case of the eb_cpu5282 we need to select HW_WATCHDOG for the
target, given how it's implemented.

For the cases of m53menlo, dh_imx6, display5, and display5_factory we
disable SPL watchdog support as the particular combination of options
they want would require either more symbols or enabling SPL_DM.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:41:38 -05:00
Tom Rini
c7fad78ec0 Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_BR0_PRELIM
   CONFIG_SYS_OR1_PRELIM
   CONFIG_SYS_BR1_PRELIM
   CONFIG_SYS_OR2_PRELIM
   CONFIG_SYS_BR2_PRELIM
   CONFIG_SYS_OR2_PRELIM
   CONFIG_SYS_BR3_PRELIM
   CONFIG_SYS_OR3_PRELIM
   CONFIG_SYS_BR4_PRELIM
   CONFIG_SYS_OR4_PRELIM
   CONFIG_SYS_BR5_PRELIM
   CONFIG_SYS_OR5_PRELIM
   CONFIG_SYS_BR6_PRELIM
   CONFIG_SYS_OR6_PRELIM
   CONFIG_SYS_BR7_PRELIM
   CONFIG_SYS_OR7_PRELIM

This also introduces CONFIG_SYS_BR0_PRELIM_BOOL as not all platforms
that can set these values do so.  Add the relevant SYS_BRx_PRELIM_BOOL
to platforms that had not been previously migrated.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-01 10:58:10 -05:00
Tom Rini
970bf8603b Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig
This converts the following to Kconfig:
   CONFIG_USE_BOOTCOMMAND
   CONFIG_BOOTCOMMAND
   CONFIG_RAMBOOTCOMMAND
   CONFIG_NFSBOOTCOMMAND

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-01 10:58:10 -05:00
Tom Rini
cc1386b0d3 kgdb: Remove unused serial related options
We have a few CONFIG options for KGDB that are not referenced, remove
them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-01 21:08:19 -04:00
Tom Rini
7cfbba36e9 Convert CONFIG_SYS_MALLOC_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MALLOC_LEN

Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-31 17:47:49 -04:00
Tom Rini
49c8ef0e45 Convert CONFIG_SYS_LOAD_ADDR to Kconfig
Now that we have consistent usage, migrate this symbol to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-31 17:46:37 -04:00
Tom Rini
72d81360aa global: Convert CONFIG_LOADADDR to CONFIG_SYS_LOADADDR
- In most of the codebase, we reference CONFIG_SYS_LOAD_ADDR and not
  CONFIG_LOADADDR.
- Generally, CONFIG_SYS_LOADADDR is set to CONFIG_LOADADDR and then as
  noted, we use CONFIG_SYS_LOADADDR.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:46:37 -04:00
Tom Rini
95372165ae nxp: Migrate a number of DDR related symbols to Kconfig
- Guard most of the options in drivers/ddr/fsl/Kconfig with
  SYS_FSL_DDR || SYS_FSL_MMDC.
- Migrate FSL_DMA, DDR_ECC, DDR_ECC_CMD, and ECC_INIT_VIA_DDRCONTROLLER
  to Kconfig.
- Clean up the logic for including the DDR_ECC_CMD code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:46:37 -04:00
Tom Rini
7ae1b0804d ppc: Rework some hard-coded BOOTCOMMANDS
There are an assortment of hard-coded CONFIG_BOOTCOMMAND options in some
board headers.  Rework these so that they do not add to the CONFIG
namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:13:28 -04:00
Tom Rini
fc8d3b9a2f Convert CONFIG_I2C_SET_DEFAULT_BUS_NUM et al to Kconfig
This converts the following to Kconfig:
   CONFIG_I2C_SET_DEFAULT_BUS_NUM
   CONFIG_I2C_DEFAULT_BUS_NUMBER

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:08 -04:00
Tom Rini
6d5d0c955e i2c: fsl_i2c: Migrate to Kconfig
- As there are no boards that use different values for speed / slave on
  different buses, use a single option.
- Switch to using the common SYS_I2C_SPEED / SYS_I2C_SLAVE options.
- Introduce _HAS_ options for additional buses as only the first one is
  common to all users.
- Convert all remaining symbols to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:07 -04:00
Tom Rini
55dabcc8f2 Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACY
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig.  Next, as you cannot
have SYS_I2C_LEGACY and DM_I2C at the same time, introduce
CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only
in SPL.  Finally, for some PowerPC cases we also need
CONFIG_TPL_SYS_I2C_LEGACY support.  Convert all of the existing users to
one or more symbols.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:07 -04:00
Tom Rini
88cd7d0ea9 Convert CONFIG_SYS_I2C_EEPROM_ADDR et al to Kconfig
- Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR
  based on current usage.
- Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
  CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE
  CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
  to Kconfig.  We move these symbols around a bit and add appropriate
  dependencies to them.  In some cases, we now add a correct default value
  as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:06 -04:00
Tom Rini
d7d40f614d Convert CONFIG_ID_EEPROM to Kconfig
This converts the following to Kconfig:
   CONFIG_ID_EEPROM

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:05 -04:00
Simon Glass
5ccee855f2 ppc: Drop DM_PCI from config files
Now that DM_PCI is always enabled we don't need to check it. Drop this
old code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-05 16:14:36 -04:00
Heinrich Schuchardt
e02c082287 config: MPC8548CDS: eliminate symbol CONFIG_SYS_ID_EEPROM
Symbol CONFIG_SYS_ID_EEPROM is defined in include/configs/MPC8548CDS.h
but never used. Remove it here and from the whitelist.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-04 15:58:31 -04:00
Simon Glass
69d9eda4da i2c: Rename CONFIG_SYS_I2C to CONFIG_SYS_I2C_LEGACY
It is quite confusing that CONFIG_SYS_I2C selects the legacy I2C and
CONFIG_DM_I2C selects the current I2C. The deadline to migrate I2C is less
than a year away.

Also we want to have a CONFIG_I2C for U-Boot proper just like we have
CONFIG_SPL_I2C for SPL, so we can simplify the Makefile rules.

Rename this symbol so it is clear it is going away.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-28 14:29:37 -04:00
Rajesh Bhagat
c8c0170f19 configs: fsl: move via specific defines to Kconfig
Moves below via specific defines to Kconfig:

	CONFIG_FSL_VIA

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:41 +05:30
Igor Opaniuk
2147a16983 dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO
Use CONFIG_IS_ENABLED() macro, which provides more convenient
way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs
for both SPL and U-Boot proper.

CONFIG_IS_ENABLED(DM_I2C) expands to:
- 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y',
- 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y',
- 0 otherwise.

All occurences were replaced automatically using these bash cmds:
$ find . -type f -exec sed -i
     's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
    's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
    's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +

Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-21 06:08:00 +01:00
Adam Ford
e91907a146 Convert CONFIG_ENV_OVERWRITE to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_OVERWRITE

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Rerun migration, remove some comments]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28 16:18:06 -04:00
Marek Vasut
a410f13dfe net: dc2114x: Add Kconfig entries
Add Kconfig entries for the dc2114x driver and convert various boards.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
2020-07-25 11:24:02 +02:00
Marek Szyprowski
69be8fd164 powerpc: move ADDR_MAP to Kconfig
Move ADDR_MAP related config options from include/configs/*.h to the
proper place in lib/Kconfig. This has been done using
./tools/moveconfig.py and manual inspection of the generated changes.
This is a preparation to use ADDR_MAP helper on ARM 32bit Raspberry Pi4
board for mapping the PCIe XHCI MMIO, which is above the 4GiB identity
mapping limit.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-10 14:10:43 -04:00
Tom Rini
2254f13216 Kconfig: Remove CONFIG_CLOCKS_IN_MHZ
This variable is unset anywhere and only unset on a number of platforms.
Remove all relevant code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26 10:29:26 -04:00
Marek Vasut
6463b73e0b net: eepro100: Add Kconfig entries
Add Kconfig entries for the eepro100 driver and convert various boards.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2020-06-18 19:34:40 +02:00
Simon Glass
1af3c7f422 common: Drop linux/stringify.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Ashok Reddy Soma
702de89cc6 treewide: mem: Move mtest related defines to Kconfig
Move below defines which are used by mtest utility to Kconfig.
CONFIG_SYS_MEMTEST_START
CONFIG_SYS_MEMTEST_END

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[trini: Fix kmcoge5ne board, re-run migration as well]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-08 12:02:56 -04:00
Biwen Li
01d97d5f18 dm: ppc: MPC8548CDS: add i2c DM support
This supports i2c DM for board MPC8548CDS

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Tom Rini
a09fea1d28 env: Finish migration of common ENV options
- In ARMv8 NXP Layerscape platforms we also need to make use of
  CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
  to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
  SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
  for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
  rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
  CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
  ENV_IS_IN_FLASH.
- Migrate all platforms.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20 18:32:09 -05:00
Hou Zhiqiang
2056121d67 powerpc: MPC8548CDS: Disable legacy PCIe driver when DM_PCI is enabled
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-28 13:47:47 +05:30
Hou Zhiqiang
7bb72855b3 powerpc: mpc8548cds: extend the reserved length for monitor
Extend the reserved length for monitor to fix the following
build error:

BINMAN  u-boot-with-dtb.bin
Wrote map file './image.map' to show errors
binman: Section '/binman': contents size 0x80000 (524288)
exceeds section size 0x40000 (262144)
Makefile:1373: recipe for target 'u-boot-with-dtb.bin' failed
make: *** [u-boot-with-dtb.bin] Error 1

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-26 21:33:45 +05:30
Hou Zhiqiang
2b12f6cfe6 powerpc: mpc85xx: Move CONFIG_FSL_PCIE_RESET to Kconfig
Use the Kconfig option to select the PCIe reset errata.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-20 10:44:09 +05:30
Rajesh Bhagat
32413125b3 configs: fsl: move DDR specific defines to Kconfig
Moves below DDR specific defines to Kconfig:

CONFIG_FSL_DDR_BIST
CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
CONFIG_FSL_DDR_INTERACTIVE
CONFIG_FSL_DDR_SYNC_REFRESH

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03 20:56:01 +05:30
Adam Ford
2fe88d4522 Convert CONFIG_FLASH_CFI_DRIVER et al to Kconfig
This converts the following to Kconfig:
   CONFIG_FLASH_CFI_DRIVER
   CONFIG_SYS_FLASH_USE_BUFFER_WRITE
   CONFIG_FLASH_CFI_MTD
   CONFIG_SYS_FLASH_PROTECTION
   CONFIG_SYS_FLASH_CFI

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Re-migrate]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-19 19:19:50 -04:00
Adam Ford
d7869b2183 Convert CONFIG_MII et al to Kconfig
This converts the following to Kconfig:
   CONFIG_MII
   CONFIG_DRIVER_TI_EMAC

Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-08-17 13:03:54 -04:00
Mario Six
a8ca5c8adb treewide: Move CONFIG_PHY_MARVELL to Kconfig
The CONFIG_PHY_MARVELL has already been migrated to Kconfig (some boards
already had it in their Kconfig), but had not been moved for older
boards.

Move it to the defconfigs for all boards.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-14 21:28:38 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00