Commit graph

1320 commits

Author SHA1 Message Date
Marek Vasut
65186977ee mmc: renesas-sdhi: Use priv directly
The dev_get_priv(dev) is used twice in the probe function.
Replace the second invocation with priv variable.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-08-30 15:32:59 +02:00
Marek Vasut
12ea13ad43 mmc: socfpga: Add clock framework support
Add support for fetching the clock frequency both using the legacy
method in case clock framework is disabled as well as via the clock
framework if it is enabled. This allows for migration to the clock
framework on platforms which supports it while not breaking legacy
platforms. That said, the legacy method must be removed eventually.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
2018-08-13 22:35:42 +02:00
Tom Rini
fc82e7684b Merge branch 'master' of git://git.denx.de/u-boot-samsung 2018-08-07 21:36:20 -04:00
Lukasz Majewski
0acdb2cc8a ARM: Odroid XU3: Modify exynos dw_mmc driver to support Odroid XU3 in DM MMC
This commit enables support for Exynos Designware MMC driver based on DM.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-08-06 10:53:53 +09:00
Lukasz Majewski
7c350a2a0f ARM: Odroid XU3: Fix the dwmci_exynos *priv data assignment for DM_MMC (sdr_timing)
By convention for DM_MMC the host->priv is used to store struct udevice
*dev pointer.

Unfortunately, the legacy Exynos DW MMC code uses this field to
store pointer to dwmci_exynos_priv_data struct
Hence, we do need to get data in other way - namely by using container_of
when host pointer is present.
In this way the sdr_timing data is properly accessed.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-08-06 10:53:53 +09:00
Lukasz Majewski
b88c1efadb ARM: dw_mmc: Exclude dwmci Exynos priv_data allocation from exynos_dwmci_get_config()
This commit prevents memory leak when this function is used with DM_MMC
as the struct dwmci_exynos_priv_data is already allocated by DM.

It is necessary for NON DM aware devices to allocate this struct first.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-08-06 10:53:53 +09:00
Tom Rini
0cba6e906a Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2018-08-04 19:41:30 -04:00
Patrice Chotard
fa91156165 mmc: arm_pl180_mmci: Remove cd_inverted host's struct field
As platform uses GPIOs for card detection, it's
simpler and more readable to use GPIO_ACTIVE_(LOW|HIGH)
in the gpio flags instead of using the cd-inverted
property.

Reported-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-03 19:53:54 -04:00
Patrice Chotard
43d36a0bae mmc: arm_pl180_mmci: Add missing clk_free
Add missing clk_free() call in case of failure
when enabling the clock.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-03 19:53:54 -04:00
Patrice Chotard
8015093874 mmc: arm_pl180_mmci: Update to support CONFIG_BLK
Config flag CONFIG_BLK becomes mandatory, update arm_pl180_mmci
to support this config.

This driver is used by STM32Fx and by Vexpress platforms.
Only STM32Fx are DM ready. No DM code is isolated and will be
removed easily when wexpress will be converted to DM.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-03 19:53:54 -04:00
Icenowy Zheng
42956f1b85 sunxi: add MMC support for H6
The Allwinner H6 SoC has 3 MMC controllers like the ones in A64, with
the MMC2 come with the capability to do crypto by EMCE.

Add MMC support for H6. EMCE support is not added yet.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-31 11:38:13 +05:30
Jon Nettleton
6c09eba507 mmc: break out get_op_cond code to its own function
This code is useful for testing the existance of devices that
do not have card detect capabilities.  This breaks out the core
functionality and leaves the actual init logic and error reporting
in mmc_start_init().

Signed-off-by: Jon Nettleton <jon@solid-run.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-07-23 10:17:04 +02:00
Patrick Delaunay
7d118161bb mmc: stm32_sdmmc2: update pwron management
Correctly manage the SDMMC reset and card cycle power
to fully handle the power cycle added in the MMC uclass
and avoid issue with level-shifter with some uSDCARD.

3 states managed in driver:
  1/ reset: SDMMC disable, signal HiZ
  2/ power-cycle: SDMMC disable, signals drive to 0
  3/ power-on: SDMMC enabled

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-07-19 16:31:35 -04:00
Adam Sampson
979b239b4c dm: mmc: sunxi: Add A10/A20 compatible strings
Commit dd27918c22 ("dm: mmc: sunxi: Add support for driver model")
only added the allwinner,sun5i-a13-mmc compatible string for this
driver. The DM initialisation code here also works with (at least) A10
and A20, so add the appropriate compatible strings as per Linux 4.17's
driver.

Tested on A10 Cubieboard and A20 pcDuino3 Nano with CONFIG_DM_MMC.
(A20 worked already, because sun7i-a20.dtsi specifies both the A13 and
A20 strings.)

Signed-off-by: Adam Sampson <ats@offog.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2018-07-16 12:25:47 +05:30
Thomas Fitzsimmons
894c3ad27f board: arm: Add support for Broadcom BCM7445
Add support for loading U-Boot on the Broadcom 7445 SoC.  This port
assumes Broadcom's BOLT bootloader is acting as the second stage
bootloader, and U-Boot is acting as the third stage bootloader, loaded
as an ELF program by BOLT.

Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org>
Cc: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
2018-07-10 16:55:57 -04:00
Ley Foon Tan
2d4d693772 mmc: dwmmc: socfpga: Add reset ctrl to driver
Add code to reset all reset signals as in mmc DT node. A reset property
is an optional feature, so only print out a warning and do not fail if a
reset property is not present.

If a reset property is discovered, then use it to deassert, thus
bringing the IP out of reset.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-09 15:28:24 -04:00
Michal Simek
b6911780b5 mmc: zynq: Fix tuning_loop_counter type in arasan_sdhci_execute_tuning()
Code around tuning_loop_counter variable expects to go below zero.
That's why this variable can't use unsigned type.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-15 08:54:04 +02:00
Siva Durga Prasad Paladugu
1a7414f626 mmc: sdhci: Fix MMC HS200 tuning command failures
This patch fixes the mmc tuning command failures
when tuning pattern data needs to read back for
comparision against the expected bit pattern.

Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-15 08:54:04 +02:00
Tom Rini
040b2583c3 Merge branch 'master' of git://git.denx.de/u-boot-sh 2018-06-02 16:58:27 -04:00
Tom Rini
582d97b6d3 Xilinx changes for v2018.07 second pull
zynqmp:
 - Show reset reason
 - Remove emulation platform
 - Update pmufw version
 - Simplify mmc bootmode
 - Remove dc2 useless configuration file
 - Cleanup mini config
 - Defconfig syncup
 - zcu100, zcu104 and zcu111 dts fixes
 
 xilinx:
 - Use live-tree functions in some drivers
 - Add support for Avnet Minized and Antminer S9
 
 fpga:
 - Add secure bitstream loading support
 
 mmc:
 - Add hs200 mode support
 
 usb xhci:
 - Header fix
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlsRRy4ACgkQykllyylKDCEovgCdGWsr4XFQfDZxCEMmsg2vyJF2
 0egAnj6Td1k6yTzQPDXwCtExZJfS/vgl
 =QxUz
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2018.07-2' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.07 second pull

zynqmp:
- Show reset reason
- Remove emulation platform
- Update pmufw version
- Simplify mmc bootmode
- Remove dc2 useless configuration file
- Cleanup mini config
- Defconfig syncup
- zcu100, zcu104 and zcu111 dts fixes

xilinx:
- Use live-tree functions in some drivers
- Add support for Avnet Minized and Antminer S9

fpga:
- Add secure bitstream loading support

mmc:
- Add hs200 mode support

usb xhci:
- Header fix
2018-06-01 13:50:15 -04:00
Marek Vasut
d629152a9a mmc: renesas-sdhi: Add R8A77990 E3 compatible
Add new compatible to the Uniphier SD driver for R8A77990 E3 SoC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01 09:47:02 +02:00
Siva Durga Prasad Paladugu
843337089e mmc: zynqmp: Add HS200 modes support for ZynqMP
This patch adds HS200 suuport for ZynqMP and enables
the same for ZC1751 DC1 board which has eMMC on it.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31 13:50:39 +02:00
Siva Durga Prasad Paladugu
434f9d454e mmc: sdhci: Update sdhci_send_command() to handle HS200
This patch updates sdhci_send_command() to handle MMC
HS200 tuning command.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31 13:50:39 +02:00
Michal Simek
458e8d8071 mmc: zynq: Use live-tree functions
Use live-tree functions.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-31 13:50:39 +02:00
Rick Chen
cf3922dddc mmc: ftsdc010_mci: Sync compatible with DT mmc node
The compatible string of ftsdc010_mci.c is different from
the mmc driver in Linux Kernel. Modify it for consistency.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
2018-05-29 14:45:03 +08:00
Patrice Chotard
635159a090 mmc: stm32_sdmmc2: Fix stm32_sdmmc2_start_cmd()
SDMMC_CMD_CPSMEN bit is wrongly check and set in
SDMMC_ARG register instead of SDMMC_CMD register.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-26 18:19:19 -04:00
Tom Rini
7049f62000 Patch queue for rpi - 2018-05-24
Some minor fixes for the Raspberry Pi:
 
   - Fix SD writes on new sdhost controller
   - Sanitize default load addresses, allowing for better payload placement
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJbBnlXAAoJECszeR4D/txghsYP/2n48vz7VwWI/gAGLvEzZl2T
 ZPVX/RKgMrWcGmEZiJVTE02OovbU9ybECOZXOAqLToQAXcGAl0OHNi+h2F/AH9+S
 WUZbv1wQeHD42Q3ivNjtNZY0U5D7rvVRL+33FmrHuBiLq1mUbq3uHBn7NTrCORX5
 byZvQXis4JeUNefIrAynrelI7uuyaQEtwcOWbEFlh9S1tnXjbJkkaleU5TQs3tpl
 yjlCrFthhi9uOW/cKoqWs0GxxNsWF9/RDapTXkLvfGOS+0noHKfeYypmDuD3q1CM
 FmicN0t459s3H5ft/ACSa/HyAuxzkP4Zqn8vDMG+MsxYLOiklwKDLzRNj1GcvmYd
 Z6UmnWPII4ZRyEC8xjyL5e7ovb/RW+9g4ZVVctP+PHJCHjIMxiAdxGQ+DjYRn2Q5
 T25HPXH1KTqxGwMI1LcEWfHaI7FoBSyTHy7CQrMvb7cuSDSg1lyTYSwdzsAmTX1J
 4++DLpTAqi2XSNNt+DIb938xKYXwbfhSCMH3Z9oTsOfxcqiWIudqbPyMwdxsOJ73
 tn6Ql2aivq9TyP5tByszQbf3Y8KoXoCtufWg8Lj2fCgsC0wAtDpEEhWI8QT2zY7q
 Rs+UX+eWRWKO5UOLqG1aAhJayoP2/12f9oTbo+Q1VmCgqG696J2UkezMmUjDNv/D
 IAXemClUO1MMY7yax8Ls
 =te7/
 -----END PGP SIGNATURE-----

Merge tag 'signed-rpi-next' of git://github.com/agraf/u-boot

Patch queue for rpi - 2018-05-24

Some minor fixes for the Raspberry Pi:

  - Fix SD writes on new sdhost controller
  - Sanitize default load addresses, allowing for better payload placement
2018-05-24 09:54:14 -04:00
Alex Kiernan
5a7b11e65a Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig
Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig. Split the command handling
from the underlying support and expose this through CMD_MMC_RPMB.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-05-23 17:30:02 -04:00
Alexander Graf
79fd08f745 mmc: Unirqify bcm2835_sdhost and fix writes
The bcm2835 sdhost driver has a problem with "write multiple" commands.
It seems to boil down to the fact that the controller dislikes its FIFO
to get drained at the end of a block when a write multiple blocks command
is in flight.

The easy fix is to simply get rid of all the IRQ driven logic and make
the driver push as much data into the FIFO as it can. That way we never
drain and we never run into the problem.

Reported-by: Jan Leonhardt <jan@cyberdesigner.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-05-23 22:31:42 +02:00
Ramon Fried
b70fe965bb mmc: sdhci: Check that ops are defined
The check is necessary to avoid NULL pointer dereference.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2018-05-14 21:28:38 -04:00
Marek Vasut
62d77cea31 mmc: Improve tinification
Drop all the extra content from the MMC core, so that tiny MMC support
is really tiny, no fancy anything. That means the tiny MMC support does
only 1-bit transfers at default speed settings. Moreover, this patch
drops duplicate instance of struct mmc mmc_static, which wasted about
360 bytes. Furthermore, since MMC tiny supports only one controller
at all times, get rid of mallocating the ext csd backup and replace
it with static array. All in all, this patch saves ~4 kiB of bloat
from the MMC core, which on platforms with severe limitations can be
beneficial.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
[trini: Fixup checkpatch.pl style warnings]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-13 07:57:32 -04:00
Siva Durga Prasad Paladugu
d1f4e39d58 mmc: zynq_sdhci: Add support for SD3.0
This patch adds support of SD3.0 for ZynqMP.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 11:13:51 +02:00
Siva Durga Prasad Paladugu
b8e25ef16a mmc: sdhci: Read capabilities register1 and update host caps
This patch reads the capabilities register1 and update the host
caps accordingly for mmc layer usage. This patch mainly reads
for UHS capabilities inorder to support SD3.0.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 10:22:26 +02:00
Siva Durga Prasad Paladugu
ca992e82e4 mmc: sdhci: Invoke platform specific tuning and delay routines
This patch adds support to invoke any platform specific tuning
and delay routines if available.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:38:27 +02:00
Siva Durga Prasad Paladugu
b88a7a4c56 mmc: sdhci: Handle execute tuning command in sdhci_send_command
This patch upadted sdhci_send_command to handle execute tuning
command.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:38:27 +02:00
Siva Durga Prasad Paladugu
2a2d7efe77 mmc: sdhci: Add support for disabling clock
This patch adds support to disable clock if clk_disable
was set and then enable or set clock if the clock was changed
or clock was disabled when clock needs to be enabled.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:38:27 +02:00
Vipul Kumar
36332b6e4b mmc: Changed the datatype of the variable to handle 64-bit arch
This patch changed the datatype of variable "start" from uint to ulong
to work properly on 64-bit machines as well. Also the return type of
get_timer() function is ulong.

Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:38:27 +02:00
Patrick Bruenn
55118ec90c dm: mmc: socfpga: call dwmci_probe()
On a socfpga_cyclone5 based board the SD card, was never powered up. For
other dw_mmc based SoCs dwmci_probe() is called in the platform specific
probe(). It seems this call is missing for socfpga_dw_mmc.

With this change DWMCI_PWREN is set by dmwci_init().

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-05-08 13:12:33 +09:00
Jaehoon Chung
72b5a0371d mmc: Kconfig: add the MMC_TRACE config in Kconfig
Add the MMC_TRACE config in Kconfig.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-05-08 13:12:33 +09:00
Jaehoon Chung
d2faadb59c mmc: add the debug message in mmc_set_clock
Add the debug message for checking the mmc clock status.
It's helpful to debug the controlling clock.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-05-08 13:12:33 +09:00
Jaehoon Chung
6511718254 mmc: add the MMC_CLK_ENABLE/DISABLE macro in mmc.h
mmc_set_clock() function has the disable argument as bool type.
When mmc_set_clock is called, it might be passed to "true" or "false".
But it's too confusion whether clock is enabled or disabled with only
"true" and "false".
To prevent the confusion, replace to MMC_CLK_ENABLE/DISABLE macro from
true/false.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-05-08 13:12:33 +09:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Hannes Schmelzer
4781921630 mmc: zynq_sdhci: use correct quirk if CONFIG_ZYNQ_HISPD_BROKEN is defined
The 'SDHCI_QUIRK_NO_HISPD_BIT' is used wrong here. The purpose of this
quirk is to tell the sdhci-driver that the IP-core doesn't have a "high-
speed-enable" bit in its registers.

With this commit we change this to the correct quirk:
SDHCI_QUIRK_BROKEN_HISPD_MODE

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2018-05-02 10:57:43 +09:00
Hannes Schmelzer
88a57125fa mmc: sdhci: add SDHCI_QUIRK_BROKEN_HISPD_MODE
Some IP-core implementations of the SDHCI have different troubles on the
silicon where they are placed.

On ZYNQ platform for example Xilinx doesn't accept the hold timing of an
eMMC chip which operates in High-Speed mode and must be forced to
operate in non high-speed mode. To get rid of this
"SDHCI_QUIRK_BROKEN_HISPD_MODE" is introduced.

For more details about this refer to the Xilinx answer-recor #59999
https://www.xilinx.com/support/answers/59999.html

This commit:
- doesn't set HISPD bit on the host-conroller
- reflects this fact within the host-controller capabilities

Upon this the layer above (mmc-driver) can setup the card correctly.

Otherwise the MMC card will be switched into high-speed mode and causes
possible timing violation on the host-controller side.

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2018-05-02 10:57:43 +09:00
Peng Fan
0a4c2b099e mmc: fix return value check condition
sd_read_ssr returns 0, means no error.
Fixes: 5b2e72f32721484("mmc: read ssr only if MMC write support is enabled")

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-05-02 10:57:43 +09:00
Tom Rini
abeb9d7897 Merge git://git.denx.de/u-boot-sunxi 2018-04-30 06:52:32 -04:00
Tom Rini
d024236e5a Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27 14:54:48 -04:00
Philipp Tomsich
5ff8e54888 sunxi: improve throughput in the sunxi_mmc driver
Throughput tests have shown the sunxi_mmc driver to take over 10s to
read 10MB from a fast eMMC device due to excessive delays in polling
loops.

This commit restructures the main polling loops to use get_timer(...)
to determine whether a (millisecond) timeout has expired.  We choose
not to use the wait_bit function, as we don't need interruptability
with ctrl-c and have at least one case where two bits (one for an
error condition and another one for completion) need to be read and
using wait_bit would have not added to the clarity.

The observed speedup in testing on a A31 is greater than 10x (e.g. a
10MB write decreases from 9.302s to 0.884s).

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Mylène Josserand <mylene.josserand@bootlin.com>
Acked-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-04-25 10:29:38 +05:30
Marek Vasut
ec360e6486 mmc: Staticize sd_select_bus_width
Staticize the function since it's only used in mmc.c .

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Tom Rini <trini@konsulko.com>
2018-04-23 16:07:46 -04:00
Tom Rini
3853c650e4 Merge git://git.denx.de/u-boot-uniphier 2018-04-23 12:21:20 -04:00
Masahiro Yamada
fc2d0302b6 mmc: uniphier-sd: skip clock set-up for SPL
The size of SPL is hitting the limit (64KB) for uniphier_v7_defconfig.
When booting from SD/eMMC, obviously its clock has been properly set up
by the boot ROM.  Acutually, no need to re-initialize the clock in SPL.

Using a clock driver would generalize the SoC specific code, but
solving the memory footprint problem would win.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-24 00:35:34 +09:00
Masahiro Yamada
30b5d9aa9a mmc: tmio: move clk_enable() to each driver's probe function
I need to differentiate the clock handling for uniphier-sd.  Move it
to each driver's probe function from the tmio common code so that
renesas-sdhi will not be affected.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-24 00:35:34 +09:00
Heinrich Schuchardt
f6549c8541 mmc: avoid division by zero in meson_mmc_config_clock
The Odroid C2 fails to read from mmc with U-Boot v2018.03.
The change avoids a division by zero.

The fix was suggested by Jaehoon in
https://lists.denx.de/pipermail/u-boot/2018-January/318577.html

Reported-by: Vagrant Cascadian <vagrant@debian.org>
Suggested-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Vagrant Cascadian <vagrant@debian.org>
2018-04-23 10:49:58 -04:00
Stefan Mavrodiev
4744d81cc0 sunxi: mmc: Fix phase delays
U-boot driver for sunxi-mmc uses PLL6, unlike linux kernel where
PLL5 is used, with clock rates respectively 600MHz and 768MHz.
Thus there are different phase degree steps - 24 for the kernel and
30 for u-boot.

In the kernel driver the phase is set 90 deg for output and 120 for
sample. Dividing by 30 will result values 3 and 4. Those are the
values set in the u-boot driver.

However, the condition defining delays is wrong. MMC core driver
requests clock of 52MHz, sunxi-driver sets clock of 50MHz, but
phase is set 30 deg for output and 120 deg for sample.

Apparently this works for most cards.
On A20-SOM204-EVB-eMMC there is eMMC card (KLMAG2GEND) which complains
about it. Maybe there is other boards with similar problem?
So the fix is to match delays for both u-boot and kernel.

Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-23 12:12:56 +05:30
Marek Vasut
f3dca4aac6 mmc: sh_mmcif: Add Kconfig entry
Add Kconfig entry for SH MMCIF driver.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
2018-04-21 18:33:30 +02:00
Marek Vasut
48f54a2d74 mmc: sh_mmcif: Add DM and DT probing support
Add MMC DM and DT probing support into the SH MMCIF driver.
This patch abstracts out the common bits of the send command
and set ios functions, so they can be used both by DM and non
DM setups and adds the DM probe support.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
2018-04-21 18:33:19 +02:00
Matt Pelland
ca4e7d674e mmc: mv_sdhci: zero out sdhci_host structure
The mv_sdhci driver was not zeroing the sdhci_host structure it
allocates causing random access violations in parts of the mmc core
where the "ops" member pointers are checked and called if not NULL.

Signed-off-by: Matt Pelland <mpelland@starry.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-04-17 10:39:30 +02:00
Marek Vasut
cb0b6b035a mmc: tmio: Rename Matsushita to TMIO
Synchronize the naming with Linux, call the common code TMIO.
No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-14 00:03:30 +02:00
Marek Vasut
cf39f3f304 mmc: renesas-sdhi: Wait after reconfiguring pins
The IP requires some time to recuperate after the IO pin
properties were changed. Add a delay to assure this.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:12:00 +02:00
Marek Vasut
5ee7c9dc77 mmc: matsushita-common: Add missing else
Fix minor rebase omission, the else was missing which triggered
two accesses to the register on 64bit variant of the IP.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:12:00 +02:00
Marek Vasut
f23b208ebe mmc: matsushita-common: Wait for command completion
Make sure to wait for the command to complete altogether, including
the trailing 8 clock cycles. This prevents the driver for accidentally
writing the CMD register too fast before the previous command fully
completed.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:12:00 +02:00
Marek Vasut
8dc9a10e49 mmc: matsushita-common: Correctly set mode in 16bit
The HOST_MODE register must be set to 0 when the IP is operated in 16bit
mode, otherwise 16bit access to the data FIFO may fail.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:12:00 +02:00
Marek Vasut
01c0151a36 mmc: matsushita-common: Special case only select registers in 16bit
There are only a few registerse used in the 16bit mode which are
32bit internally. Special-case only those in the IO accessors and
always write both halves. Any other register access is protected
from accidentally overwriting neighboring register.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:11:59 +02:00
Marek Vasut
f63968ba26 mmc: renesas-sdhi: Add Renesas SDR104/HS200 tuning support
Add code for PHY tuning required for SDR104/HS200 support on Renesas RCar.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:11:59 +02:00
Marek Vasut
0e2bd5aa49 mmc: matsushita-common: Export register access functions
Export the matsu_sd_{read,write}l() common register access
functions, so that they can be used by other drivers sharing
the common code.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:11:59 +02:00
Marek Vasut
e10422f108 mmc: matsushita-common: Properly handle pin voltage configuration
Factor out the regulator handling into set_ios and add support for
selecting pin configuration based on the voltage to support UHS modes.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:11:59 +02:00
Marek Vasut
58c35b17aa mmc: matsushita-common: Always check controller version
Handle the controller version even if quirks are set. The controller in
Renesas Gen3 SoCs does provide the version register, which indicates a
controller v10 and the controller does support internal DMA and /1024
divider.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:11:59 +02:00
Marek Vasut
a7b7401c78 mmc: matsushita-common: Handle bus width 0
Handle bus width 0 as 1-bit bus to assure valid content of
MATSU_SD_OPTION register WIDTH field.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:11:58 +02:00
Marek Vasut
635ae6fefa mmc: matsushita-common: Handle DMA completion flag differences
The DMA READ completion flag position differs on Socionext and Renesas
SoCs. It is bit 20 on Socionext SoCs and using bit 17 is a hardware bug
and forbidden. It is bit 17 on Renesas SoCs and bit 20 does not work on
them.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:11:58 +02:00
Marek Vasut
78773f1467 mmc: matsushita-common: Handle Renesas div-by-1
On the Renesas version of the IP, the /1 divider is realized by
setting the clock register [7:0] to 0xff instead of setting bit
10 of the register. Check the quirk and handle accordingly.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:11:58 +02:00
Marek Vasut
f98833dbe6 mmc: matsushita-common: Add Renesas RCar quirks
Add a quirk to identify that the controller is Renesas RCar variant
of the Matsushita SD IP and another quirk indicating it can support
Renesas RCar HS200/HS400/SDR104 modes.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:11:58 +02:00
Marek Vasut
147169d9c9 mmc: matsushita-common: Use mmc_of_parse()
Drop the ad-hoc DT caps parsing in favor of common framework function.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:11:58 +02:00
Marek Vasut
7cf7ef81ed mmc: renesas-sdhi: Handle 16bit IP
The Renesas RCar Gen2 chips have a mix of 32bit and 16bit variants
of the IP. There is no DT property which allows discerning those,
so what Linux does is it checks the size of the register area and
if it is 0x100, the IP is 16bit, otherwise the IP is 32bit. Handle
the distinction the same way.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:11:57 +02:00
Marek Vasut
c769e60990 mmc: uniphier: Allow passing quirks to the probe function
Certain instances of the SD IP require more elaborate digging
in the DT to figure out which variant of the SD IP is in use.
Allow explicit passing of the quirks into the probe function.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:11:57 +02:00
Marek Vasut
db1266d696 mmc: uniphier: Add support for 16bit variant
Add support for 16bit mutation of the Matsushita SD IP. Since some
registers are internally 32bit, the matsu_sd_{read,write}l() has
to special-case this 16bit variant a bit.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:11:57 +02:00
Marek Vasut
620fd85c0b mmc: uniphier: Drop useless check
Drop useless check in matsu_sd_{read,write}q(), this is only ever
called to read the data from FIFO and only when 64bit variant of
the block is used anyway.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:11:57 +02:00
Marek Vasut
12a510e23f mmc: uniphier: Factor out FIFO accessors
Add macros to generate the FIFO accessors, since the code is almost
the same with only minor differences. This is done in preparation
for adding 16bit variant of the IP.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:11:56 +02:00
Marek Vasut
7dfddc099d mmc: renesas-sdhi: Add Renesas SDHI Kconfig entry
Add Kconfig entry for the Renesas SDHI variant of the controller
and split the Makefile entries accordingly.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:11:56 +02:00
Marek Vasut
e94cad93b7 mmc: uniphier: Split out SoC specific bits from the driver
Factor out common code from the uniphier SD driver, change the prefix
of the functions from uniphier_sd_ to matsu_sd_ and create separate
renesas-sdhi.c driver. Thus far, all the code is still compiled when
CONFIG_UNIPHIER_MMC is selected and there is no functional change.
This patch is a preparation for further split of the SoC specific
parts of the Matsushita SD driver, used both on Uniphier and R-Car.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 23:11:56 +02:00
Mario Six
07dea2e737 treewide: Migrate CONFIG_FSL_ESDHC to Kconfig
Migrate the CONFIG_FSL_ESDHC option to Kconfig.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-04-08 18:31:05 -04:00
Jonathan Gray
8ae1f82988 mmc: use core clock frequency in bcm2835 sdhost
In raspberrypi-firmware 7fdcd00e00a42a1c91e8bd6f5eb8352fe9358557 and
later start.elf now sets the EMMC clock to 200 MHz.

According to Phil Elwell in
https://github.com/raspberrypi/firmware/issues/953
the SDHost controller shares the core/VPU clock and doesn't use
the EMMC clock.

Use the core clock id when determining the frequency to allow
U-Boot to work with recent versions of raspberrypi-firmware.
Otherwise U-Boot hangs at:

U-Boot 2018.03 (Mar 14 2018 - 20:36:00 +1100)

DRAM:  948 MiB
RPI 3 Model B (0xa02082)
MMC:   mmc@7e202000: 0, sdhci@7e300000: 1
Loading Environment from FAT...

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-05 13:17:43 +02:00
Tom Rini
80a66a55fa Merge git://git.denx.de/u-boot-x86 2018-03-30 18:17:23 -04:00
Tom Rini
0ca0a546b1 Merge git://git.denx.de/u-boot-riscv 2018-03-30 18:16:56 -04:00
Bernhard Messerklinger
0851f344d7 x86: mmc: Fix mapping of BAR memory
Use dm_pci_map_bar function for BAR mapping. This has the advantage
of clearing BAR flags and and only accepting mapped memory.

Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-03-30 16:05:08 +08:00
Rick Chen
bf9ba4dbb0 mmc: ftsdc010: Merge nds32_mmc to ftsdc010
nsd32_mmc was created to support ftsdc010 dm.
It is not necessary to separate both, so merge it
to ftsdc010.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
2018-03-30 13:13:45 +08:00
Rick Chen
095c9f35d5 mmc: ftsdc010: Migrate CONFIG_FTSDC010_SDIO to Kconfig
Convert CONFIG_FTSDC010_SDIO to Kconfig.
So CONFIG_FTSDC010_SDIO can also be
removed from config_whitelist.txt.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
2018-03-30 13:13:45 +08:00
Rick Chen
cf52231a93 mmc: ftsdc010: Drop non-dm code
Only three defconfig(adp-ag101p_defconfig,
adp-ae3xx_defconfig, nx25-ae250_defconfig)
set CONFIG_FTSDC010=y. And they all also
enable CONFIG_DM_MMC. So the non-dm code
of ftsdc010 can be dropped now.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
2018-03-30 13:13:45 +08:00
Rick Chen
7459c887c5 mmc: ftsdc010: Support High-Speed mode
ftsdc010 dm driver has been disable High-Speed mode
as default to work around Andes AE3XX platform's problem,
because of it does not support High-Speed mode in
commit id 73cd56b2df.

But other platforms or SoCs maybe support this function.
So High-Speed mode can be enabled from dts with
cap-mmc-highspeed or cap-sd-highspeed property.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30 13:13:34 +08:00
Philipp Tomsich
6837c58666 rockchip: sdhci: support 8bit bus-width
The Rockchip-specific SDHCI wrapper does not process the 'bus-width'
property in the SDHCI node. Consequently, the bus is always kept in
4bit mode, even if 8bit wide operation is available, supported and
requested in the DTS.

This change adds processing of the 'bus-width' property and sets the
host capability flag for an 8bit wide bus, if set to 8. As the logic
in sdhci.c does not support clearing the 4bit capability, we assume
that 4bit operation is always supported.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:47:08 +02:00
Tom Rini
b75643ad0a Merge git://git.denx.de/u-boot-sunxi 2018-03-14 13:27:14 -04:00
Patrick Delaunay
167f2c90f6 mmc: stm32: sdmmc2: add support for st, pin-ckinsdmmc_ckin
This patch adds "st,pin-ckin" support to activate sdmmc_ckin feature.
When using an external driver (a voltage switch transceiver),
it's advised to select SDMMC_CKIN feedback clock input to sample
the received data.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13 21:45:37 -04:00
Patrick Delaunay
a72dd8ed95 mmc: stm32: sdmmc2: add hardware flow control support
The hardware flow control functionality is used to avoid
FIFO underrun (TX mode) and overrun (RX mode) errors.
The behavior is to stop SDMMC_CK during data transfer and
freeze the SDMMC state machines.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13 21:45:37 -04:00
Heinrich Schuchardt
8be4e61d01 mmc: sunxi: support cd-inverted
With CONFIG_DM_MMC the BananaPi does not detect SD cards.

The sunxi device trees use the cd-inverted property to indicate that
the card detect is inverted.

This property is documented in Linux kernel devicetree/bindings/mmc/mmc.txt
The property is not marked as deprecated.

A similar patch was posted by Tuomas but is in status "Changes Requested".
https://patchwork.ozlabs.org/patch/850377/

This patch is a stripped down version of his patch.

Suggested-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-03-13 20:12:31 +05:30
Tom Rini
81f077f40f Merge git://git.denx.de/u-boot-sh 2018-03-05 20:24:17 -05:00
Masahiro Yamada
b08c8c4870 libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>
Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
  include/libfdt.h         -> include/linux/libfdt.h
  include/libfdt_env.h     -> include/linux/libfdt_env.h

and replaces include directives:
  #include <libfdt.h>      -> #include <linux/libfdt.h>
  #include <libfdt_env.h>  -> #include <linux/libfdt_env.h>

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05 10:16:28 -05:00
Marek Vasut
d6eb25c2f1 mmc: uniphier-sd: Add R8A77965 M3N entries
Add entries for the R8A77965 M3N SoC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05 10:59:37 +01:00
Vipul Kumar
3ccc207a30 mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MIN_FREQ
This patch added Kconfig support for CONFIG_ZYNQ_SDHCI_MIN_FREQ
and enabled it in respective defconfig.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-01 16:44:10 +01:00
Vipul Kumar
5dc5a53c5e mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ
This patch added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ
and enabled it in respective defconfig.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-01 16:44:10 +01:00
Tom Rini
4bafceff0e Merge git://git.denx.de/u-boot-mmc 2018-02-25 22:28:59 -05:00
Jean-Jacques Hiblot
beac7d33d9 mmc: omap_hsmmc: use a default 52MHz max clock rate if none is specified
mmc_of_parse() doesn't set a default value if none is available in DT.
In that case, use a default 52MHz clock rate.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-02-26 10:52:15 +09:00
Jean-Jacques Hiblot
27a4b3bc4c mmc: omap_hsmmc: make it possible to compile out ADMA support
Some platforms don't have ADMA controllers. For those platforms, compiling
it out reduces the size of the binary by about 600 bytes.
Leaving the support in doesn't break things as the driver checks at runtime
if the ADMA2 controller is present.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-02-26 10:52:15 +09:00
Jean-Jacques Hiblot
c7d08d80c3 mmc: omap_hsmmc: compile out write support if not needed
This reduces the size of the binary by about 196 bytes.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-02-26 10:52:15 +09:00
Jean-Jacques Hiblot
45530e3943 mmc: omap_hsmmc: do not embed struct mmc in struct omap_hsmmc_plat
The area for struct mmc can be allocated dynamically. It greatly reduces
the size of struct omap_hsmmc_plat. This is useful in cases where the board
level code declares one or two struct omap_hsmmc_plat because it doesn't
use the Driver Model.

This saves around 740 bytes for the am335x_evm SPL.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-02-26 10:52:15 +09:00
Alexander Kochetkov
76584e3398 mmc: fix off-by-one bug in mmc_startup_v4()
MMC card with EXT_CSD_REV value 9 will trigger off-by-one
bug while accessing mmc_versions array. The patch fix that.

Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
2018-02-23 15:57:41 +09:00
Faiz Abbas
8a856db238 mmc: Drop unnecessary case for mmc_probe()
Drop the unnecessary empty function case for mmc_probe().

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2018-02-23 15:56:33 +09:00
Marek Vasut
0b75cc3f13 mmc: uniphier-sd: Add compatible strings for RCar Gen2
Add DT compatible strings for RCar Gen2 SoCs, so that this driver
can bind with them. Unlike Gen3, which uses 64bit FIFO, the Gen2
uses 16bit FIFO.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-23 00:06:05 +01:00
Jaehoon Chung
1b313aa3e3 mmc: synchronize the sequence with enum bus_mode in mmc.h
If some configs are disabled, number of freqs array will not assigned to
correct value with bus_mode.
Synchornize the ordering with enum bus_mode in mmc.h.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-02-21 18:04:25 +09:00
Alex Kiernan
4a41fec589 mmc: Fix uninitialised priv member
When using omap_hsmmc without the device model then the allocation
of mmc->priv ends up uninitialised.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2018-02-19 17:00:33 +09:00
Jean-Jacques Hiblot
ace1bed327 mmc: fix bug in mmc_startup_v4()
The correspondence between mmc versions as used in u-boot and the version
numbers reported in register EXT_CSD_REV is wrong for versions above and
including MMC_VERSION_4_41. All those versions were shifted by one:
real 4.5 hardware appeared to be MMC_VERSION_5_0.

Fix this by adding the missing version in the correspondence table.

Reported-by: eil Eilmsteiner Heribert <eil@keba.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2018-02-19 16:59:33 +09:00
Jean-Jacques Hiblot
a0276f3eee mmc: Fix bug in sd_set_card_speed()
After settings the speed of the sd with the switch command, a check is
done to make sure that the new speed has been set. The current check has a
masking error: speed are encoded on 4 bits only.
Fix it by masking the upper bits.

This fixes a problem seen with QEmu emulating a vexpress-a15.

Reported-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Tested-by: Jonathan Gray <jsg@jsg.id.au>
2018-02-19 16:59:21 +09:00
Jean-Jacques Hiblot
04f9f8be83 mmc: omap_hsmmc: add signal voltage selection support
I/O data lines of UHS SD card operates at 1.8V when in UHS speed
mode (same is true for eMMC in DDR and HS200 modes). Add support
to switch signal voltage to 1.8V in order to support
UHS cards and eMMC HS200 and DDR modes.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19 16:58:55 +09:00
Kishon Vijay Abraham I
90321dce0d mmc: omap_hsmmc: allow mmc clock to be gated
mmc core has defined a new parameter *clk_disable* to gate the clock.
Disable the clock here if *clk_disable* is set.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19 16:58:55 +09:00
Jean-Jacques Hiblot
42182c9b9c mmc: omap_hsmmc: implement send_init_stream callback
This callback is used to send the 74 clock cycles after power up.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19 16:58:55 +09:00
Jean-Jacques Hiblot
3149c13ac3 mmc: omap_hsmmc: update mmc->clock with the actual bus speed
When the clock is applied, compute the actual value of the clock. It may be
slightly different from the requested value (max freq, divisor threshold)

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19 16:58:55 +09:00
Jean-Jacques Hiblot
bcc6bd84d4 mmc: omap_hsmmc: allow the simple HS modes to use the default pinctrl
The default configuration is usually working fine for the the HS modes.
Don't enforce the presence of a dedicated pinmux for the HS modes.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19 16:58:55 +09:00
Kishon Vijay Abraham I
2d28eeda33 mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions
AM572x SR1.1 requires different IODelay values to be used than that used
in AM572x SR2.0. These values are populated in device tree. Add
capability in omap_hsmmc driver to extract IOdelay values for different
silicon revision. The maximum frequency is also reduced when using a ES1.1.
To keep the ability to boot both revsions with the same dtb, those values
can be provided by the platform code.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19 16:58:55 +09:00
Kishon Vijay Abraham I
33c1d77f4a mmc: omap_hsmmc: Add support to set IODELAY values
The data manual of J6/J6 Eco recommends to set different IODELAY values
depending on the mode in which the MMC/SD is enumerated in order to
ensure IO timings are met.

Add support to parse mux values and iodelay values from device tree
and set these depending on the enumerated MMC mode.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19 16:58:55 +09:00
Kishon Vijay Abraham I
2d7482cf79 mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config
Use the mmc_of_parse library function to populate mmc_config instead of
repeating the same code in host controller driver.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19 16:58:55 +09:00
Jean-Jacques Hiblot
a4efd73773 mmc: omap_hsmmc: Reduce the max timeout for reset controller fsm
>From OMAP3 SoCs (OMAP3, OMAP4, OMAP5, AM572x, AM571x), the DAT/CMD lines
reset procedure section in TRM suggests to first poll the SRD/SRC bit
until it is set to 0x1. But looks like that bit is never set to 1 and there
is an observable delay of 1sec everytime the driver tries to reset DAT/CMD.
(The same is observed in linux kernel).

Reduce the time the driver waits for the controller to set the SRC/SRD bits
to 1 so that there is no observable delay.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19 16:58:54 +09:00
Jean-Jacques Hiblot
2faa1a302b mmc: omap_hsmmc: Workaround for errata id i802
According to errata i802, DCRC error interrupts
(MMCHS_STAT[21] DCRC=0x1) can occur during the tuning procedure.

The DCRC interrupt, occurs when the last tuning block fails
(the last ratio tested). The delay from CRC check until the
interrupt is asserted is bigger than the delay until assertion
of the tuning end flag. Assertion of tuning end flag is what
masks the interrupts. Because of this race, an erroneous DCRC
interrupt occurs.

The suggested  workaround is to disable DCRC interrupts during
the tuning procedure which is implemented here.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19 16:58:54 +09:00
Jean-Jacques Hiblot
14761caeee mmc: omap_hsmmc: Add tuning support
HS200/SDR104 requires tuning command to be sent to the card. Use
the mmc_send_tuning library function to send the tuning
command and configure the internal DLL.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19 16:58:54 +09:00
Kishon Vijay Abraham I
9b3fc21837 mmc: omap_hsmmc: Enable DDR mode support
In order to enable DDR mode, Dual Data Rate mode bit has to be set in
MMCHS_CON register. Set it here.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19 16:58:54 +09:00
Jean-Jacques Hiblot
8fc238bfad mmc: omap_hsmmc: set MMC mode in the UHSMS bit field
Use the timing parameter set in the MMC core to set the
mode in UHSMS  bit field. This is in preparation for
adding HS200 support in omap hsmmc driver.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19 16:58:54 +09:00
Kishon Vijay Abraham I
b594481709 mmc: omap_hsmmc: add support to set default io voltage
"ti,dual-volt" is used in linux kernel to set the voltage capabilities.
For host controller dt nodes that doesn't have "ti,dual-volt",
it's assumed 1.8v is the io voltage. This is not always true (like in
the case of beagle-x15 where the io lines are connected to 3.3v).
Hence if "no-1-8-v" property is set, io voltage will be set to 3v.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19 16:58:54 +09:00
Kishon Vijay Abraham I
48a2f11443 mmc: omap_hsmmc: cleanup omap_hsmmc_set_ios
No functional change. Move bus width configuration setting to a
separate function and invoke it only if there is a change in the
bus width.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19 16:58:54 +09:00
Jean-Jacques Hiblot
5baf543e52 mmc: omap_hsmmc: cleanup clock configuration
Add a separate function for starting the clock, stopping the clock and
setting the clock. Starting the clock and stopping the clock can
be used irrespective of setting the clock (For example during iodelay
recalibration).
Also set the clock only if there is a change in frequency.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19 16:58:54 +09:00
Masahiro Yamada
d4d64889b0 mmc: use pr_* log functions
Use pr_* log functions from Linux.  They can be enabled/disabled
via CONFIG_LOGLEVEL.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-02-19 16:56:54 +09:00
Adam Ford
1811a928c6 Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig
config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE
based on a list of enabled options.  Moving HAVE_BLOCK_DEVICE to
Kconfig allows us to drastically shrink the logic in
config_fallbacks.h

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-08 19:09:03 -05:00
Adam Ford
99bec1aead Convert CONFIG_APBH_DMA et al to Kconfig
This converts the following to Kconfig:
   CONFIG_APBH_DMA
   CONFIG_APBH_DMA_BURST
   CONFIG_APBH_DMA_BURST8

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
[trini: Add in MMC as well]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-08 12:48:11 -05:00
Peng Fan
51313b49f2 mmc: fsl_esdhc: support SDR104 and HS200
Introduce SDR104 and HS200 support
The implementation takes linux kernel sdhci.c and sdhci-esdhc-imx.c
as reference.
 - Implement esdhc_change_pinstate to dynamically change pad settings
 - Implement esdhc_set_timing
 - Implement esdhc_set_voltage to switch voltage
 - Implement fsl_esdhc_execute_tuning to execute time process
 - Enlarge the cfg->f_max to 200MHz.
 - Parse fsl,tuning-step, fsl,tuning-start-tap and
   fsl,strobe-dll-delay-target from device tree.
 - Parse no-1-8-v property
 - Introduce esdhc_soc_data to indicate the flags and caps

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-02-04 12:00:58 +01:00
Peng Fan
59d3782cda mmc: fsl_esdhc: add strobe and tuning entry
Add entries that will be used for tuning control.
The whole layout not changed, just expand reserved3[84] and
rename other reservedx in sequence.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-02-04 12:00:58 +01:00
Peng Fan
eec2d43795 mmc: fsl_esdhc: support i.MX8M
Support i.MX8M in fsl esdhc driver.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-04 12:00:58 +01:00
Alexander Graf
c8a73a26d6 mmc: Add bcm2835 sdhost controller
The BCM2835 family of SoCs has 2 different SD controllers: One based on
the SDHCI spec and a custom, home-grown one.

This patch implements a driver for the latter based on the Linux driver.
This is needed so that we can make use of device trees that assume driver
presence of both SD controllers.

Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28 12:27:32 -05:00
Tom Rini
1d12a7c8cd Merge git://git.denx.de/u-boot-spi 2018-01-26 07:46:34 -05:00
Jun Nie
2f516e4aa2 mmc: Poll for broken card detection case
Poll for broken card detection case instead of return
no card detected.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
2018-01-24 16:12:03 +09:00
Jaehoon Chung
c0fafe64a5 mmc: fix to assign to correct clock value when clock is enabling
When clock is enabling, it's assigned to 0 as mmc->clock.
Then it can't initialize any card.
Fix to assign to correct clock value as mmc->cfg->f_min or f_max.

Fixes: 9546eb92cb ("mmc: fix the wrong disabling clock")
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Guillaume GARDET <guillaume.gardet@free.fr>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2018-01-24 16:08:27 +09:00
Álvaro Fernández Rojas
48263504c8 wait_bit: use wait_for_bit_le32 and remove wait_for_bit
wait_for_bit callers use the 32 bit LE version

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-24 12:03:43 +05:30
Benoît Thébaudeau
b9b4f146c9 mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock
Commit 4f425280fa ("mmc: fsl_esdhc: Allow all supported prescaler
values") made it possible to set SYSCTL.SDCLKFS to 0 in SDR mode on
i.MX, thus bypassing the SD clock frequency prescaler, in order to be
able to get higher SD clock frequencies in some contexts. However, that
commit missed the fact that this value is illegal on the eSDHCv3
instance of the i.MX53. This seems to be the only exception on i.MX,
this value being legal even for the eSDHCv2 instances of the i.MX53.

Fix this issue by changing the minimum prescaler value for the single
instance of the i.MX53 eSDHCv3 controller.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-22 14:17:13 +09:00
Jaehoon Chung
9546eb92cb mmc: fix the wrong disabling clock
When power is off, clock is not disabling.
Because it's passed to 1, mmc->clock should be set to f_min value.
Some drivers can't initialize the eMMC/SD card with current status.

This patch is to fix the disabling clock value to 0.

Fixes: 2e7410d76a ("mmc: disable the mmc clock during power off")

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Tested-by: Guillaume GARDET <guillaume.gardet@free.fr>
Tested-by: Anand Moon <linux.amoon@gmail.com>
2018-01-22 14:15:34 +09:00
Masahiro Yamada
61f2e5ee12 mmc: sdhci: change data transfer failure into debug message
During the tuning, drivers repeat data transfer, changing timing
parameters in the controller hardware.  So, the tuning commands
(CMD19 for SD, CMD21 for eMMC) fail, and this is not a problem
at all.

Showing "Error detected..." in normal operation just make users
upset.  This should not be shown.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22 14:11:58 +09:00
Masahiro Yamada
dd43e2a6bd mmc: sdhci-cadence: add HS200 support
Add HS200 timing setting and the MMC tuning callback.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-01-22 14:11:58 +09:00
Masahiro Yamada
4041bf7f8a mmc: sdhci-cadence: call mmc_of_parse()
This is needed to parse more capabilities such as mmc-hs200-1_8v.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22 14:11:58 +09:00
Masahiro Yamada
954a963146 mmc: sdhci-cadence: use bitfield access macros for cleanup
This driver is a counterpart from the one in Linux.  Follow the
clean-up I did in Linux.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22 14:11:58 +09:00
Masahiro Yamada
be165fbbf1 mmc: sdhci: do not overwrite host_caps in sdhci_setup_cfg()
This line overwrites host_cap that has been set by drivers and/or
helpers like mmc_of_parse().  Accumulate capabilities flags.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22 14:11:58 +09:00
Masahiro Yamada
4b28f7bc93 mmc: let mmc_of_parse() fail for insane bus-width value
You must fix your DT if it specifies insane bus-width, for example,
  bus-width = <3>;

debug() is not displayed in usual configuration, so people will not
even notice weirdness.  Use dev_err() instead, then let it fail.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22 14:11:58 +09:00
Masahiro Yamada
c42ee367fd mmc: do not overwrite cfg->f_max if "max-frequency" if missing
mmc_of_parse() in U-Boot is a pussy helper; it sets cfg->f_max to
52MHz even if DT does not provide "max-frequency" at all.  This can
overwrite cfg->f_max that may have been set to a reasonable default.

As the DT binding says, "max-frequency" is an optional property.
Do nothing if DT does not specify it.  This is the behavior of
mmc_of_parse() in Linux.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22 14:11:58 +09:00
Kishon Vijay Abraham I
29171dcfaa mmc: omap_hsmmc: Fix incorrect bit operations for disabling a bit
omap_hsmmc driver uses "|" in a couple of places for disabling a bit.
While it's okay to use it in "mmc_reg_out" (since mmc_reg_out has a
_mask_ argument to take care of resetting a bit), it's incorrectly used
for resetting flags in "omap_hsmmc_send_cmd".

Fix it here by using "&= ~()" to reset a bit.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-19 15:49:23 -05:00
Kishon Vijay Abraham I
866bb98468 mmc: omap_hsmmc: Enable Auto command (CMD12) enable
Instead of sending STOP TRANSMISSION command from MMC core, enable
the auto command feature so that the Host Controller issues CMD12
automatically when last block transfer is completed.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-19 15:49:23 -05:00
Kishon Vijay Abraham I
f0d53e88a6 mmc: omap_hsmmc: Add support for DMA (ADMA2)
The omap hsmmc host controller can have the ADMA2 feature. It brings better
read and write throughput.
On most SOC, the capability is read from the hl_hwinfo register. On OMAP3,
DMA support is compiled out.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-19 15:49:17 -05:00
Jean-Jacques Hiblot
741726ae4c Revert "omap_hsmmc: update struct hsmmc to accommodate omap3 from DT"
This reverts commit 46831c1a4c.
This reserved area at the beginning of struct hsmm, will be used later to
support ADMA

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-18 22:04:21 -05:00