Commit graph

1973 commits

Author SHA1 Message Date
Heinrich Schuchardt
29a8a2828e efi_loader: add a README.iscsi describing booting via iSCSI
The appended README explains how U-Boot and iPXE can be used
to boot a diskless system from an iSCSI SAN.

The maintainer for README.efi and README.iscsi is set.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[agraf: s/Adress/Address/]
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28 21:37:13 +01:00
Tom Rini
1d12a7c8cd Merge git://git.denx.de/u-boot-spi 2018-01-26 07:46:34 -05:00
Ezequiel Garcia
fe3dfb2324 doc: Update the zynq u-boot status
NAND and QSPI devices are now supported, so mark
them as such.

Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-24 11:45:06 +01:00
Jason Rush
c58f300628 dts: cadence_spi: Update documentation for DT bindings
Update documentation to reflect adopting the Linux DT bindings.

Tested on TI K2G platform:
Tested-by: Vignesh R <vigneshr@ti.com>

Tested on a socfpga-cyclonev board:
Tested-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>

Signed-off-by: Jason Rush <jarush@gmail.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Acked-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
Acked-by: Marek Vasut <marex@denx.de>
2018-01-24 12:07:50 +05:30
Tuomas Tynkkynen
3d22bae57f fs: Migrate ext4 to Kconfig
Migrate the following symbols to Kconfig:

CONFIG_FS_EXT4
CONFIG_EXT4_WRITE

The definitions in config_fallbacks.h can now be expressed in Kconfig.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-22 16:43:30 -05:00
Tuomas Tynkkynen
e6e5ecc5e2 m68k: Drop unreferenced CONFIG_* defines
The following config symbols are only defined once and never referenced
anywhere else:

CONFIG_AMCORE
CONFIG_ASTRO5373L
CONFIG_M52277EVB
CONFIG_M5253DEMO
CONFIG_M5253EVBE
CONFIG_M5275EVB
CONFIG_M54418TWR
CONFIG_STMARK2

Most of them are config symbols named after the respective boards which
seems to have been a standard practice at some point.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-19 15:49:32 -05:00
Tuomas Tynkkynen
e7ba41c653 ARM: Document AArch64 version of qemu-arm
It's mostly obvious, except that QEMU is annoying and requires an
explicit '-cpu cortex-a57' (or some other 64-bit core) to actually run
in 64-bit mode.

While at it, remove the references to setting the ARCH environment
variable; that is not used in U-Boot.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-19 15:49:31 -05:00
Andre Przywara
971a54193c doc: fix incorrect usage of DT node unit address
The DT spec demands a unit-address in a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Fix all occurences in various documentation files where this was not
observed, to not give bad examples to the reader.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15 18:29:21 -07:00
Andre Przywara
b8790ebeec doc: FIT image: fix incorrect examples of DT node unit address
The DT spec demands a unit-address of a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Fix all occurences in the FIT image example files where this was not
observed, to not give bad examples to the reader.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15 18:29:21 -07:00
Andre Przywara
838404054e doc: FIT image: fix incorrect description of DT node unit address
The DT spec demands a unit-address in a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Fix all occurences in the FIT image documentation files where this was not
observed, to not give bad examples to the reader.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-15 18:29:21 -07:00
Rick Chen
3fafced74d riscv: doc: Add relative doc to describe RISC-V
Add documents to describe NX25 and AE250.
Also update other documents for RISC-V.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Signed-off-by: Greentime Hu <green.hu@gmail.com>
2018-01-12 08:05:12 -05:00
Eddie Cai
1c977772a6 rockchip:usb: add a simple readme for rockusb
add a simple readme to introduce rockusb and tell people how to use it

Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-10 11:11:06 +01:00
Miquel Raynal
32466c445c doc: bindings: soft-spi: update documentation to match the code
Linux bindings have been introduced in the code (removing the U-Boot
specific ones) without documentation update. Compatible string has
changed, as well as the four GPIO properties. Reflect this by updating
the soft-spi.txt documentation.

Fixes: 102412c415 ("dm: spi: soft_spi: switch to use linux compatible string")
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2018-01-10 12:06:15 +05:30
Tom Rini
15616a0aa5 Merge git://git.denx.de/u-boot-dm 2017-12-14 15:46:07 -05:00
Felix Brack
bf802f5d54 power: extend prefix match to regulator-name property
This patch extends pmic_bind_children prefix matching. In addition to
the node name the property regulator-name is used while trying to match
prefixes. This allows assigning different drivers to regulator nodes
named regulator@1 and regulator@10 for example.
I have discarded the idea of using other properties then regulator-name
as I do not see any benefit in using property compatible or even
regulator-compatible. Of course I am open to change this if there are
good reasons to do so.

Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Peng Fan
a1be94b654 SPL: Add FIT data-position property support
For external data, FIT has a optional property "data-position" which
can set the external data to a fixed offset to FIT beginning.
Add the support for this property in SPL FIT.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tomas Melin <tomas.melin@vaisala.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: "Andrew F. Davis" <afd@ti.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: "tomas.melin@vaisala.com" <tomas.melin@vaisala.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: "Cooper Jr., Franklin" <fcooper@ti.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
Cc: Rick Altherr <raltherr@google.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-12 21:33:38 -05:00
Eugeniy Paltsev
e80dac0ab8 ARC: clk: introduce HSDK CGU clock driver
Synopsys HSDK clock controller generates and supplies clocks to various
controllers and peripherals within the SoC.

Each clock has assigned identifier and client device tree nodes can use
this identifier to specify the clock which they consume. All available
clocks are defined as preprocessor macros in the
dt-bindings/clock/snps,hsdk-cgu.h header and can be used in device
tree sources.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-12-11 11:36:23 +03:00
Simon Glass
1d0f30a8e0 log: Add documentation
Add documentation for the log system.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-12-07 15:17:00 -05:00
Philipp Tomsich
ae0d33a729 rockchip: rk3399-puma: add code to allow forcing a power-on reset
The reset circuitry in the RK3399 only resets 'almost all logic' when
a software reset is performed.  To make our software maintenance
easier in the future, we want to have the option (controlled by a DTS
property) to force all reset causes other than a power-on reset to
trigger a power-on reset via a GPIO trigger.

This adds the necessary support to the rk3399-puma (i.e. RK3399-Q7)
board-support and the documentation for the new property
(sysreset-gpio) within the /config-node.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-30 22:59:54 +01:00
Rick Chen
872cd42e70 dt-bindings: spi: Add andestech atcspi200 spi binding doc
Add a document to describe Andestech atcspi200 spi and
binding information.

Signed-off-by: Rick Chen <rick@andestech.com>
2017-11-30 09:45:29 +08:00
Rick Chen
410d129e8c dt-bindings: timer: Add andestech atcpit100 timer
Add a document to describe Andestech atcpit100 timer and
binding information.

Signed-off-by: rick <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-30 09:39:12 +08:00
Tom Rini
65972a0b62 Merge git://git.denx.de/u-boot-socfpga 2017-11-28 09:30:36 -05:00
Tien Fong Chee
772f8765d7 ARM: socfpga: add bindings doc for arria10 fpga manager
This DT binding doc is porting from Linux DT binding doc.
commit 1adcbea4201a6852362aa5ece573f1f169b28113

Add a device tree bindings document for the SoCFPGA Arria10
FPGA Manager driver.

Signed-off-by: Alan Tull <atull@opensource.altera.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-By: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2017-11-26 02:34:10 +01:00
Bin Meng
c0c5f910ad MAINTAINERS: Update maintainer for USB xHCI
As discussed with Marek, this adds myself as the maintainer to
offload the USB xHCI part.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-11-26 02:22:36 +01:00
Philipp Tomsich
4d9253fb76 rockchip: rk3188: use boot0 hook to load up SPL in 2 steps
For the RK3188, the BROM will attempt to load up the first stage
image (SPL for the RK3188) in two steps: first 1KB to offset 0x800
in the SRAM and then the remainder to offset 0xc00 in the SRAM.
It always enters at 0x804, though.

With this changeset, the RK3188 boot removes the TPL (stub) stage and
builds a single SPL binary that utilizes the early back-to-bootrom via
the boot0-hook.

Consequently, the passing of the saved boot params via pmu->os_reg[2]
is also removed.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21 23:57:22 +01:00
Faiz Abbas
8502f9f6d7 thermal: ti-bandgap: Add support for temperature sensor
The dra7xx series of SOCs contain a temperature sensor and an
associated analog-to-digital converter (ADC) which produces
an output which is proportional to the SOC temperature.
Add support for this temperature sensor.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-21 08:03:38 -05:00
Heinrich Schuchardt
8a28caf02b Makefile: add coccicheck target
Coccinelle is a program for static code analysis.
For details on Coccinelle see

	http://coccinelle.lip6.fr/

Add scripts/coccicheck copied from Linux kernel v4.14.

The coccicheck script executes the tests *.cocci in
directory scripts/coccinelle by calling spatch.

In Makefile add a coccicheck target. You can use it with

	make coccicheck MODE=<mode>

	where mode in patch, report, context, org.

Add a copy of Linux v4.14 file Documentation/dev-tools/coccinelle.rst
as doc/README.coccinelle.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-11-20 20:18:38 -05:00
Jorge Ramirez-Ortiz
c9e87ba665 env: Save environment at the end of an MMC partition
Allow the platform to define a partition by name at the end of which
the environment data will be located.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2017-11-17 07:44:13 -05:00
Jagan Teki
d80599e894 rockchip: doc: Fix U-Boot proper location for falcon
This patch fixed U-Boot proper location has been
missed to update in bewlo commit
"rockchip: doc: update U-Boot location info"
(sha1: 73e6dbe855)

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-10 14:08:21 +01:00
Goldschmidt Simon
341e44ed66 rockchip: doc: update U-Boot location info
The U-Boot location has been moved to block 16384.
This is 8MB, not 4MB.

Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-10 14:08:20 +01:00
Kever Yang
73e6dbe855 rockchip: doc: update U-Boot location info
Update rockchip U-Boot location to 0x4000/16384.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-07 09:16:57 +01:00
Angelo Dureghello
6ba2da90de m68k: doc: update outdated documentation
Update m68k documentation to reflect the current ColdFire
architecture support status.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2017-11-06 09:59:02 -05:00
Masahiro Yamada
6af5520fe1 doc: verified-boot: fix crypto algorithm examples
As you see in crypto_algos in common/image-sig.c, the algorithm
should be either "rsa2048" or "rsa4096".  "rs2048" is a typo.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-23 17:28:18 -04:00
Masahiro Yamada
9e19031ca3 doc: uniphier: add simple guide to Verified Boot
Add a simple documentation about how to use the Verified Boot on
UniPhier boards.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-23 01:09:22 +09:00
Heinrich Schuchardt
871aa41d4c x86: provide CONFIG_BUILD_ROM
Up to now we depended on an exported variable to build u-boot.rom.
We should be able to specify it in the configuration file, too.

With this patch this becomes possible using the new Kconfig option
CONFIG_BUILD_ROM.

This option depends on CONFIG_X86 and is selected in
qemu-x86_defconfig and qemu-x86_64_defconfig.

Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-19 11:37:51 +08:00
Bin Meng
917d3565b5 x86: minnowmax: Adjust VGA rom address
Adjust VGA rom address to 0xfffb0000 so that u-boot.rom image
can be built again.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-10-19 11:37:51 +08:00
Tuomas Tynkkynen
d5587fa308 ARM: Add documentation for the qemu-arm board
Add brief documentation for the recently merged qemu-arm board.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-16 09:42:51 -04:00
Stefan Agner
accb428402 doc: update imx_usb_loader URL
The changes required to use U-Boot's Serial Download Protocol
implementation are now available in upstream imx_usb_loader
repository. Update the URL accordingly.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-12 17:31:16 +02:00
Fabio Estevam
626365b4f7 README.imx6: Prefer loading SPL via the new SDP mechanism
Now that it is possible to load SPL and u-boot.img via imx_usb_loader
tool, mention this method instead of the old one that relied on ymodem.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12 17:31:16 +02:00
Tom Rini
2ee87b0c1a Merge branch 'rmobile' of git://git.denx.de/u-boot-sh 2017-10-10 20:14:38 -04:00
Felix Brack
bd2259e3c4 doc: Fix statements on case sensitivity for regulator prefix
The regulator bindings state that regulator prefixes are allowd to be
in upper or lower case. However pmic_bind_children from pmic_uclass uses
strncmp to compare DT node name against prefix. This comparison is case
sensitive hence the regulator driver prefix case matters.

Signed-off-by: Felix Brack <fb@ltec.ch>
2017-10-06 11:28:17 -04:00
Jean-Jacques Hiblot
2f57c95100 spl: dm: Make it possible for the SPL to pick its own DTB from a FIT
u-boot can be embedded within a FIT image with multiple DTBs. It then
selects at run-time  which one is best suited for the platform.
Use the same principle here for the SPL: put the DTBs in a FIT image,
compress it (LZO, GZIP, or no compression) and append it at the end of the
SPL.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
[trini: Move default y of SPL_MULTI_DTB_FIT_DYN_ALLOC to it being the
default choice if SYS_MALLOC_F, drop spl.h include from lib/fdtdec.c
it's unused.]
Signed-off-by Tom Rini <trini@konsulko.com>
2017-10-06 11:26:41 -04:00
Jean-Jacques Hiblot
11955590a2 dts: renamed FIT_EMBED to MULTI_DTB_FIT and moved it to the dts Kconfig
CONFIG_FIT_EMBED might be confused with CONFIG_OF_EMBED, rename it
MULTI_DTB_FIT as it is able to get a DTB from a FIT image containing
multiple DTBs. Also move the option to the Kconfig dedicated to the DTS
options and create a README for this feature.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-05 21:31:04 -04:00
Marek Vasut
fd107e32ee doc: rmobile: Update README
Update the README with build instructions for R8A7795/R8A7796 boards.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-10-04 08:50:43 +09:00
Maxime Ripard
a95aee6af7 usb: gadget: Make g_dnl USB settings common
The g_dnl USB settings for the vendor ID, product ID and manufacturer are
actually common settings that can and should be shared by all the gadgets.

Make them common by renaming them, and convert all the users.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03 19:12:05 +02:00
Philipp Tomsich
80e9f88e67 rockchip: spl: support a 'same-as-spl'-specifier in the spl-boot-order
It is often desirable to configure the spl-boot-order (i.e. the order
that SPL probes devices to find the FIT image containing a full U-Boot)
such that it contains 'the same device the SPL stage was booted from'
early on.  To support this, we introduce the 'same-as-spl' specifier
for the spl-boot-order property.

This commit adds:
 - documentation for the new board_spl_was_booted_from() function that
   individual SoCs/boards should provide, if they can determine where
   the SPL was booted from
 - implements the new board_spl_was_booted_from() stub function
 - adds support for handling the 'same-as-spl' specifier and calling
   into the per-SoC/per-board support code.

This also updates the documentation for the 'u-boot,spl-boot-order'
property.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-01 00:33:34 +02:00
Jagan Teki
532cb7f5ad rk3288: vyasa: Add TPL support
Since the size of SPL can't be exceeded 0x8000 bytes in RK3288,
it is not possible add new SPL features like Falcon mode or etc.

So add TPL stage so-that adding new features to SPL is possible.
- TPL: DRAM init, clocks
- SPL: MMC, falcon, etc

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01 00:33:33 +02:00
Patrice Chotard
23a0641685 dm: reset: add stm32 reset driver
This driver is adapted from linux drivers/reset/reset-stm32.c
It's compatible with STM32 F4/F7/H7 SoCs.

This driver doesn't implement .of_match as it's binded
by MFD RCC driver.

To add support for each SoC family, a SoC's specific
include/dt-binfings/mfd/stm32xx-rcc.h file must be added.

This patch only includes stm32h7-rcc.h dedicated for STM32H7 SoCs.
Other SoCs support will be added in the future.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-22 07:40:01 -04:00
Patrice Chotard
4c3aebd56a dm: clk: add clk driver support for stm32h7 SoCs
This driver implements basic clock setup, only clock gating
is implemented.

This driver doesn't implement .of_match as it's binded
by MFD RCC driver.

Files include/dt-bindings/clock/stm32h7-clks.h and
doc/device-tree-bindings/clock/st,stm32h7-rcc.txt
will be available soon in a kernel tag, as all the
bindings have been acked by Rob Herring [1].

[1] http://lkml.iu.edu/hypermail/linux/kernel/1704.0/00935.html

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-22 07:40:01 -04:00
Patrice Chotard
40d1a31e63 usb: dwc3: Add dwc3 glue driver support for STi
This patch adds the ST glue logic to manage the DWC3 HC
on STiH407 SoC family. It configures the internal glue
logic and syscfg registers.

Part of this code been extracted from kernel.org driver
(drivers/usb/dwc3/dwc3-st.c)

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-22 07:39:59 -04:00
Patrice Chotard
b7ca56dcda usb: phy: Add STi USB2 PHY
This is the generic phy driver for the picoPHY ports
used by USB2/1.1 controllers. It is found on STiH407 SoC
family from STMicroelectronics.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-22 07:39:57 -04:00
Tom Rini
45d19acb2f Merge git://git.denx.de/u-boot-uniphier 2017-09-18 10:58:10 -04:00
Masahiro Yamada
81b9bb5fcb ARM: uniphier: merge two defconfig files into uniphier_v7_defconfig
The main difference between Pro4 and PXs2/LD6b is the Denali NAND
IP version.  This is now distinguished by DT.  Merge the two defconfig
files into uniphier_v7_defconfig.

Update the README.uniphier too.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-18 20:26:06 +09:00
Tom Rini
c07f38208a Merge git://git.denx.de/u-boot-x86 2017-09-17 11:46:51 -04:00
Bin Meng
eb45787b39 x86: Support Intel Cherry Hill board
This adds support to Intel Cherry Hill board, a board based on
Intel Braswell SoC. The following devices are validated:

- serial port as the serial console
- on-board Realtek 8169 ethernet controller
- SATA AHCI controller
- EMMC/SDHC controller
- USB 3.0 xHCI controller
- PCIe x1 slot with a graphics card
- ICH SPI controller with an 8MB Macronix SPI flash
- Integrated graphics device as the video console

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-16 14:57:44 +08:00
Franklin S Cooper Jr
56fc7032e1 doc: overlays: Tweak documentation regarding overlays
Pull some information regarding overlays from commit messages and
put them directly within the documentation. Also add some information
regarding required dtc version to properly use overlays.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-09-15 05:27:49 -06:00
Pantelis Antoniou
d80162cfc5 doc: Document how to apply fdt overlays
We have the capability to apply overlays on the command line but
we didn't have a document explaining how.

Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Reviewed-by: Łukasz Majewski
Acked-by: Simon Glass <sjg@chromium.org>
2017-09-15 05:27:49 -06:00
Pantelis Antoniou
6b54e50b5a fit: fdt overlays doc
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Reviewed-by: Łukasz Majewski
Acked-by: Simon Glass <sjg@chromium.org>
2017-09-15 05:27:49 -06:00
Simon Glass
0d15463c05 dtoc: Rename the phandle struct
Rather than naming the phandle struct according to the number of cells it
uses (e.g. struct phandle_2_cell) name it according to the number of
arguments it has (e.g. struct phandle_1_arg). This is a more intuitive
naming.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-15 05:27:47 -06:00
Tom Rini
8a33cb8b6b Merge git://git.denx.de/u-boot-fsl-qoriq 2017-09-12 12:02:50 -04:00
Chris Packham
e11aa602ab patman: add support for omitting bouncing addresses
Add support for reading a list of bouncing addresses from a in-tree file
(doc/bounces) and from the ~/.patman config file. These addresses are
stripped from the Cc list.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com <mailto:philipp.tomsich@theobroma-systems.com>>
2017-09-11 21:43:58 -06:00
York Sun
c8bc3c0c9f spl: fit: Add booting OS first
If CONFIG_SPL_OS_BOOT is enabled, boot OS if kernel image is found
in FIT structure.

Signed-off-by: York Sun <york.sun@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-11 07:55:36 -07:00
York Sun
5fd13d9736 spl: fit: Support both external and embedded data
SPL supports U-Boot image in FIT format which has data outside of
FIT structure. This adds support for embedded data for normal FIT
images.

Signed-off-by: York Sun <york.sun@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-11 07:55:36 -07:00
Chris Packham
0683fb7242 usb: doc: update README.usb for new config options
A number of the config options for USB networking have been migrated to
Kconfig. Update README.usb to reflect this.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
2017-09-08 10:23:01 -04:00
Alison Chaiken
2105f34843 doc: remove duplicate text in README.gpt
Signed-off-by: Alison Chaiken <alison@she-devel.com>
2017-09-07 10:44:34 -04:00
Tom Rini
ced0fd938d Merge git://git.denx.de/u-boot-dm 2017-09-04 14:56:45 -04:00
Lukasz Majewski
4b51a89170 git: mailrc: Update e-mail address
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-09-04 09:02:06 -04:00
Simon Glass
d944bf6b5e dm: core: Add livetree documentation
Add some documentation for the live device tree support in U-Boot. This
was missing from the initial series.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
2017-09-04 02:10:06 -06:00
Simon Glass
302466d07f dm: Add migration plan for CONFIG_BLK
The CONFIG_BLK conversion involves quite invasive changes in the U-Boot
code, with #ifdefs and different code paths. We should try to move over to
this soon so we can drop the old code.

Set a deadline of 9 months for this work, rounded up to the next release.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-04 02:10:06 -06:00
Adam Ford
6ef2f90108 Convert CONFIG_BCH to Kconfig
This converts the following to Kconfig:
   CONFIG_BCH

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-01 20:45:26 -04:00
Tom Rini
6aee2ab68c Merge git://git.denx.de/u-boot-imx
Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	configs/imx6qdl_icore_mmc_defconfig
	configs/imx6qdl_icore_rqs_defconfig
2017-09-01 10:40:59 -04:00
Bin Meng
fceadc1459 nvme: Adjust the 'nvme' command to use blk_common_cmd()
Instead of having separate code in the 'nvme' command, adjust it to use
the common function.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-28 07:17:15 -04:00
Tom Rini
cc0427d269 Merge git://git.denx.de/u-boot-i2c 2017-08-26 15:10:38 -04:00
Masahiro Yamada
e43f74ac0b doc: verified-boot: fix typos
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-26 14:56:14 -04:00
Anatolij Gustschin
767cb74a00 cmd: spl: provide address and size of prepared FDT in environment
Writing prepared FDT to persistent storage should be possible in
scripts. Create environment variables containing address and size
of the updated FDT. Scripts can use these variables after running
'spl export fdt ...' command to write the new blob to persistent
storage.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-08-26 14:56:12 -04:00
Stefan Agner
f9c39d95f1 doc: add Serial Download Protocol documentation
Document the U-Boot Serial Download Protocol implementation and
some typical use cases.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
2017-08-23 10:41:58 +02:00
Patrice Chotard
4fadcaf097 i2c: add i2c driver for stm32
Add i2c driver which can be used on both STM32F7 and STM32H7.
This I2C block supports the following features:
 _ Slave and master modes
 _ Multimaster capability
 _ Standard-mode (up to 100 kHz)
 _ Fast-mode (up to 400 kHz)
 _ Fast-mode Plus (up to 1 MHz)
 _ 7-bit and 10-bit addressing mode
 _ Multiple 7-bit slave addresses (2 addresses, 1 with configurable mask)
 _ All 7-bit addresses acknowledge mode
 _ General call
 _ Programmable setup and hold times
 _ Easy to use event management
 _ Optional clock stretching
 _ Software reset

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-23 07:04:40 +02:00
Tom Rini
09b6a6dd01 Merge git://git.denx.de/u-boot-usb 2017-08-21 07:16:56 -04:00
Lukasz Majewski
5bf4475f1d doc: license: Add license header to the README.dfutftp file
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-08-21 11:31:11 +02:00
Masahiro Yamada
00aa453ebf ARM: uniphier: remove sLD3 SoC support
This SoC is too old.  It is difficult to maintain any longer.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20 23:05:39 +09:00
Simon Glass
35affd7a2f env: Rename eth_getenv_enetaddr() to eth_env_get_enetaddr()
Rename this function for consistency with env_get().

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:30:44 -04:00
Simon Glass
fd1e959e91 env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr()
Rename this function for consistency with env_set().

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:23:56 -04:00
Simon Glass
382bee57f1 env: Rename setenv() to env_set()
We are now using an env_ prefix for environment functions. Rename setenv()
for consistency. Also add function comments in common.h.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:22:18 -04:00
Sam Protsenko
5abc1a4523 common: Move CONFIG_BOOTARGS to Kconfig
Also introduce CONFIG_USE_BOOTARGS option so we can control if
CONFIG_BOOTARGS defined at all.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
[trini: Resync r8a779[56]_ulcb, various ls10xx targets]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 17:06:06 -04:00
Tom Rini
c1b62ba9ca Merge branch 'master' of git://git.denx.de/u-boot-rockchip 2017-08-14 10:40:01 -04:00
Bin Meng
7088a36598 x86: qemu: Enable NVMe driver
QEMU supports NVMe emulation. Enable the NVMe driver on QEMU x86.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13 15:17:33 -04:00
Zhikang Zhang
0adc38be3d nvme: Add nvme commands
Add nvme commands in U-Boot command line.

1. "nvme scan" - scan NVMe blk devices
2. "nvme list" - show all available NVMe blk devices
3. "nvme info" - show current or a specific NVMe blk device
4. "nvme device" - show or set current device
5. "nvme part" - print partition table
6. "nvme read" - read data from NVMe blk device
7. "nvme write" - write data to NVMe blk device

Signed-off-by: Zhikang Zhang <zhikang.zhang@nxp.com>
Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13 15:17:32 -04:00
Zhikang Zhang
982388eaa9 nvme: Add NVM Express driver support
NVM Express (NVMe) is a register level interface that allows host
software to communicate with a non-volatile memory subsystem. This
interface is optimized for enterprise and client solid state drives,
typically attached to the PCI express interface.

This adds a U-Boot driver support of devices that follow the NVMe
standard [1] and supports basic read/write operations.

Tested with a 400GB Intel SSD 750 series NVMe card with controller
id 8086:0953.

[1] http://www.nvmexpress.org/resources/specifications/

Signed-off-by: Zhikang Zhang <zhikang.zhang@nxp.com>
Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13 15:17:31 -04:00
Philipp Tomsich
403e9cbcd5 rockchip: rk3368: add DRAM controller driver with DRAM initialisation
This adds a DRAM controller driver for the RK3368 and places it in
drivers/ram/rockchip (where the other DM-enabled DRAM controller
drivers for rockchip devices should also be moved eventually).

At this stage, only the following feature-set is supported:
 - DDR3
 - 32-bit configuration (i.e. fully populated)
 - dual-rank (i.e. no auto-detection of ranks)
 - DDR3-1600K speed-bin

This driver expects to run from a TPL stage that will later return to
the RK3368 BROM.  It communicates with later stages through the
os_reg2 in the pmugrf (i.e. using the same mechanism as Rockchip's DDR
init code).

Unlike other DMC drivers for RK32xx and RK33xx parts, the required
timings are calculated within the driver based on a target frequency
and a DDR3 speed-bin (only the DDR3-1600K speed-bin is support at this
time).

The RK3368 also has the DDRC0_CON0 (DDR ch. 0, control-register 0)
register for controlling the operation of its (single-channel) DRAM
controller in the GRF block.  This provides for selecting DDR3, mobile
DDR modes, and control low-power operation.
As part of this change, DDRC0_CON0 is also added to the GRF structure
definition (at offset 0x600).

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13 17:12:33 +02:00
Philipp Tomsich
ee14d29db0 rockchip: back-to-bootrom: split BACK_TO_BOOTROM for TPL/SPL
The back-to-bootrom option is rather unfortunately named
  CONFIG_ROCKCHIP_SPL_BACK_TO_BOOTROM
instead of
  CONFIG_SPL_ROCKCHIP_BACK_TO_BOOTROM

To make is selectable through CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BOOTROM),
we need to rename it.  At the same time, we introduce a TPL_ variant of
the option to give us finer-grained control over when it should be used.

This change is motivated by our RK3368 boot process, which returns to
the boot ROM only from the TPL stage, but not from the SPL stage.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[added fix-up for evb-rk3229_defconfig and phycore-rk3288_defconfig:]
[fixed inverted CONFIG_IS_ENABLED test for rk3288:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

include/configs/rock.h: undef
2017-08-13 17:12:19 +02:00
Alison Chaiken
203f9b48ad GPT: provide commands to selectively rename partitions
This patch provides support in u-boot for renaming GPT
partitions.  The renaming is accomplished via new 'gpt swap'
and 'gpt rename' commands.

The 'swap' mode returns an error if no matching partition names
are found, or if the number of partitions with one name does not equal
the number with the second name.   The 'rename' variant always
succeeds as long as a partition with the provided number exists.

Rewriting the partition table has the side-effect that all partitions
end up with "msftdata" flag set.  The reason is that partition type
PARTITION_BASIC_DATA_GUID is hard-coded in the gpt_fill_pte()
function.  This does not appear to cause any harm.

Signed-off-by: Alison Chaiken <alison@peloton-tech.com>
2017-08-04 20:35:27 -04:00
Alison Chaiken
73d6d18b71 GPT: add accessor function for disk GUID
In order to read the GPT, modify the partition name strings, and then
write out a new GPT, the disk GUID is needed.  While there is an
existing accessor for the partition UUIDs, there is none yet for the
disk GUID.

Changes since v6: none.

Signed-off-by: Alison Chaiken <alison@peloton-tech.com>
2017-08-04 09:56:04 -04:00
Alison Chaiken
52791db74f cmd gpt: test in sandbox
Make minor changes to README.gpt and sandbox_defconfig to support
testing of the gpt command's functionality in the sandbox.

Changes since v6: none.

Signed-off-by: Alison Chaiken <alison@peloton-tech.com>
2017-08-04 09:56:02 -04:00
Alison Chaiken
0a24238625 GPT: fix error in partitions string doc
The existing partitions-list parsing in cmd/gpt.c passes a value
from gpt_default() to set_gpt_info() that README.gpt suggests
should begin with 'partitions='.  Partition-list strings should
in fact begin with 'uuid_disk', as otherwise the call from
set_gpt_info() to extract_val() to find 'uuid_disk' will fail.
Change README.gpt accordingly.

Changes since v6: none.

Signed-off-by: Alison Chaiken <alison@peloton-tech.com>
2017-08-04 09:55:30 -04:00
Andy Shevchenko
495f3774be x86: Add Intel Edison board files
Add Intel Edison board which is using U-Boot.

The patch is based on work done by the following people (in alphabetical
order):
	Aiden Park <aiden.park@intel.com>
	Dukjoon Jeon <dukjoon.jeon@intel.com>
	eric.park <eric.park@intel.com>
	Fabien Chereau <fabien.chereau@intel.com>
	Felipe Balbi <felipe.balbi@linux.intel.com>
	Scott D Phillips <scott.d.phillips@intel.com>
	Sebastien Colleur <sebastienx.colleur@intel.com>
	Steve Sakoman <steve.sakoman@intel.com>
	Vincent Tinelli <vincent.tinelli@intel.com>

In case we're building for Intel Edison, we must have 4096 bytes of
zeroes in the beginning on u-boot.bin. This is done in
board/intel/edison/config.mk.

First run sets hardware_id environment variable which is read from
System Controller Unit (SCU).

Serial number (serial# environment variable) is generated based on eMMC
CID.

MAC address on USB network interface is unique to the board but kept the
same all over the time.

Set mac address from U-Boot using following scheme:
	OUI = 02:00:86
	next 3 bytes of MAC address set from eMMC serial number

This allows to have a unique mac address across reboot and flashing.

Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[bmeng: Add MAINTAINERS file for Intel Edison board]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30 10:30:25 +08:00
Tom Rini
f19955a014 Merge git://git.denx.de/u-boot-uniphier 2017-07-26 11:29:25 -04:00
Tom Rini
25fa0b930f FIT: List kernel_noload in the list of types
In the source_file_format.txt file we talk about how to construct a
valid FIT image.  While it already says to look at the source for the
full list, add kernel_noload to the explicit list of types.  This is
arguably the most important type to use as most often we are including a
kernel that will run from wherever it is loaded into memory and execute.

This for example, allows you to create a single FIT image for Linux that
can be used on both OMAP and i.MX devices as the kernel will not need to
be moved in memory.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-26 11:29:15 -04:00
Patrice Chotard
f303aaf21b ram: stm32: add second SDRAM bank management
FMC is able to manage 2 SDRAM banks, but the current driver
implementation is only able to manage the first SDRAM bank.

Even if only bank2 is used, some bank1 registers must be
configured.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-26 11:29:15 -04:00
Masahiro Yamada
673ac334fc doc: uniphier: rework README.uniphier
Rework the readme to reflect the latest boot mechanism on ARMv8 SoCs.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-07-26 22:27:15 +09:00
Masahiro Yamada
ee8d037ce7 ARM: uniphier: remove SPL support for ARMv8 SoCs
It has been a while since ARM Trusted Firmware supported UniPhier SoC
family.  U-Boot SPL was intended as a temporary loader that runs in
secure world.  It is a maintenance headache to support two different
boot mechanisms.  Secure firmware is realm of ARM Trusted Firmware
and now U-Boot only serves as a non-secure boot loader for UniPhier
ARMv8 SoCs.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-07-26 22:27:15 +09:00
Tom Rini
39632b4a01 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2017-07-18 08:42:48 -04:00
Stefano Babic
552a848e4f imx: reorganize IMX code as other SOCs
Change is consistent with other SOCs and it is in preparation
for adding SOMs. SOC's related files are moved from cpu/ to
mach-imx/<SOC>.

This change is also coherent with the structure in kernel.

Signed-off-by: Stefano Babic <sbabic@denx.de>

CC: Fabio Estevam <fabio.estevam@nxp.com>
CC: Akshay Bhat <akshaybhat@timesys.com>
CC: Ken Lin <Ken.Lin@advantech.com.tw>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Heiko Schocher <hs@denx.de>
CC: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com>
CC: Christian Gmeiner <christian.gmeiner@gmail.com>
CC: Stefan Roese <sr@denx.de>
CC: Patrick Bruenn <p.bruenn@beckhoff.com>
CC: Troy Kisky <troy.kisky@boundarydevices.com>
CC: Nikita Kiryanov <nikita@compulab.co.il>
CC: Otavio Salvador <otavio@ossystems.com.br>
CC: "Eric Bénard" <eric@eukrea.com>
CC: Jagan Teki <jagan@amarulasolutions.com>
CC: Ye Li <ye.li@nxp.com>
CC: Peng Fan <peng.fan@nxp.com>
CC: Adrian Alonso <adrian.alonso@nxp.com>
CC: Alison Wang <b18965@freescale.com>
CC: Tim Harvey <tharvey@gateworks.com>
CC: Martin Donnelly <martin.donnelly@ge.com>
CC: Marcin Niestroj <m.niestroj@grinn-global.com>
CC: Lukasz Majewski <lukma@denx.de>
CC: Adam Ford <aford173@gmail.com>
CC: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr>
CC: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Soeren Moch <smoch@web.de>
CC: Richard Hu <richard.hu@technexion.com>
CC: Wig Cheng <wig.cheng@technexion.com>
CC: Vanessa Maegima <vanessa.maegima@nxp.com>
CC: Max Krummenacher <max.krummenacher@toradex.com>
CC: Stefan Agner <stefan.agner@toradex.com>
CC: Markus Niebel <Markus.Niebel@tq-group.com>
CC: Breno Lima <breno.lima@nxp.com>
CC: Francesco Montefoschi <francesco.montefoschi@udoo.org>
CC: Jaehoon Chung <jh80.chung@samsung.com>
CC: Scott Wood <oss@buserror.net>
CC: Joe Hershberger <joe.hershberger@ni.com>
CC: Anatolij Gustschin <agust@denx.de>
CC: Simon Glass <sjg@chromium.org>
CC: "Andrew F. Davis" <afd@ti.com>
CC: "Łukasz Majewski" <l.majewski@samsung.com>
CC: Patrice Chotard <patrice.chotard@st.com>
CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Hans de Goede <hdegoede@redhat.com>
CC: Masahiro Yamada <yamada.masahiro@socionext.com>
CC: Stephen Warren <swarren@nvidia.com>
CC: Andre Przywara <andre.przywara@arm.com>
CC: "Álvaro Fernández Rojas" <noltari@gmail.com>
CC: York Sun <york.sun@nxp.com>
CC: Xiaoliang Yang <xiaoliang.yang@nxp.com>
CC: Chen-Yu Tsai <wens@csie.org>
CC: George McCollister <george.mccollister@gmail.com>
CC: Sven Ebenfeld <sven.ebenfeld@gmail.com>
CC: Filip Brozovic <fbrozovic@gmail.com>
CC: Petr Kulhavy <brain@jikos.cz>
CC: Eric Nelson <eric@nelint.com>
CC: Bai Ping <ping.bai@nxp.com>
CC: Anson Huang <Anson.Huang@nxp.com>
CC: Sanchayan Maity <maitysanchayan@gmail.com>
CC: Lokesh Vutla <lokeshvutla@ti.com>
CC: Patrick Delaunay <patrick.delaunay@st.com>
CC: Gary Bisson <gary.bisson@boundarydevices.com>
CC: Alexander Graf <agraf@suse.de>
CC: u-boot@lists.denx.de
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-07-12 10:17:44 +02:00
Peng Fan
f34ccce50a mmc: fsl_esdhc: drop CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT is not the correct method
to set I/O to 1.8. To boards that does not support vqmmc-supply,
use vs18_enable in fsl_esdhc_cfg. If regulator is supported,
use fixed 1.8V regulator for vqmmc-supply.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2017-07-12 09:44:22 +02:00
Igal Liberman
b6518b1ea3 arm64: mvebu: use single defconfig for Armada8K development boards
Currently, Marvell Armada8k development board use 3 different
defconfigs:
        mvebu_db-88f7040-nand_defconfig
        mvebu_db-88f7040_defconfig
        mvebu_db-88f8040_defconfig
Having 3 different defconfigs makes maintenance difficult.

This patch removes the defconfigs mentioned above and introduce
a new defconfig which represents the Armada8k family.

NOTE:
In order not to break automatic tools compilation,
a default device-tree is set in the defconfig (armada-8040-db).
However, when compiling u-boot, the user MUST explicitly export
the DEVICE_TREE for the requested board because using A80x0
device-tree on A70x0 might break the device.

For more information, refer to "doc/README.marvell" (intoduced
in this patch).

Change-Id: I98515b6306498358f3722ecf7ac4c87f236ebbd8
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-07-12 06:57:55 +02:00
Tom Rini
8d3a25685e Merge git://git.denx.de/u-boot-dm 2017-07-11 20:28:46 -04:00
Simon Glass
2cce586651 dtoc: Support multiple compatible strings in a node
Sometimes a node will have multiple compatible strings. Drivers may use
one or the other so the best approach seems to be to #define them to be
equivalent.

Update dtoc to support this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-07-11 10:08:19 -06:00
Alison Chaiken
564cf25d5b cmd gpt: test in sandbox
Make minor changes to README.gpt and sandbox_defconfig to support
testing of the gpt command's functionality in the sandbox.

Signed-off-by: Alison Chaiken <alison@peloton-tech.com>
2017-07-11 10:08:19 -06:00
Wadim Egorov
a84b589e5d doc: rockchip: Add phyCORE-RK3288 RDK to board list
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11 15:23:38 +02:00
Andy Shevchenko
daab59ac05 avr32: Retire AVR32 for good
AVR32 is gone. It's already more than two years for no support in Buildroot,
even longer there is no support in GCC (last version is heavily patched 4.2.4).

Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully).

There is no good point to keep this support in U-Boot either.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-06 16:17:19 -04:00
Heiko Schocher
98f705c9ce powerpc: remove 4xx support
There was for long time no activity in the 4xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 4xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2017-07-03 17:35:28 -04:00
Christophe Leroy
7826669df8 doc: restore doc/README.fsl-clk
doc/README.fsl-clk was removed in commit
5b8e76c35e ("powerpc, 8xx: remove support for 8xx")
allthought CONFIG_SYS_FSL_CLK is defined in
arch/arm/cpu/armv8/fsl-layerscape/Kconfig and still in use
in the following configs:

./include/configs/mx53loco.h:21:#define CONFIG_SYS_FSL_CLK
./include/configs/m53evk.h:16:#define CONFIG_SYS_FSL_CLK
./include/configs/mx25pdk.h:17:#define CONFIG_SYS_FSL_CLK
./include/configs/usbarmory.h:14:#define CONFIG_SYS_FSL_CLK
./include/configs/ls1021aqds.h:14:#define CONFIG_SYS_FSL_CLK
./include/configs/mx53cx9020.h:22:#define CONFIG_SYS_FSL_CLK
./include/configs/colibri_vf.h:17:#define CONFIG_SYS_FSL_CLK
./include/configs/mx35pdk.h:21:#define CONFIG_SYS_FSL_CLK
./include/configs/woodburn_common.h:19:#define CONFIG_SYS_FSL_CLK
./include/configs/mx7_common.h:25:#define CONFIG_SYS_FSL_CLK
./include/configs/ls1021aiot.h:12:#define CONFIG_SYS_FSL_CLK
./include/configs/ls1021atwr.h:14:#define CONFIG_SYS_FSL_CLK
./include/configs/mx53ard.h:21:#define CONFIG_SYS_FSL_CLK
./include/configs/mx53smd.h:21:#define CONFIG_SYS_FSL_CLK
./include/configs/mx51evk.h:16:#define CONFIG_SYS_FSL_CLK
./include/configs/mx6_common.h:31:#define CONFIG_SYS_FSL_CLK
./include/configs/vf610twr.h:14:#define CONFIG_SYS_FSL_CLK
./include/configs/mx53evk.h:21:#define CONFIG_SYS_FSL_CLK

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Heiko Schocher <hs@denx.de>
2017-06-29 21:30:16 -04:00
Philipp Tomsich
f8714372ed MAINTAINERS, git-mailrc: update the maintainer for rockchip
Adding myself to MAINTAINERS and git-mailrc for the rockchip
sub-architecture.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-06-23 10:38:09 -04:00
Heiko Schocher
064b55cfcb powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x
There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16 10:14:55 -04:00
Tom Rini
4f58002013 Merge git://git.denx.de/u-boot-mpc85xx 2017-06-14 18:53:03 -04:00
York Sun
3913191c8a powerpc: mpc8540ads: mpc8560ads: Drop support for MPC8540/60ADS
Drop support for these two legacy boards.

Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12 11:30:00 -07:00
Heiko Schocher
5025897774 powerpc, 5xx: remove support for 5xx
There was for long time no activity in the 5xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 5xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12 08:38:05 -04:00
Heiko Schocher
2eb48ff7a2 powerpc, 8260: remove support for mpc8260
There was for long time no activity in the 8260 area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8260,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12 08:38:02 -04:00
Heiko Schocher
5b8e76c35e powerpc, 8xx: remove support for 8xx
There was for long time no activity in the 8xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8xx,
so remove it (with a heavy heart, knowing that I remove
here the root of U-Boot).

Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12 08:37:55 -04:00
Simon Glass
fe67eaccd0 README: Add instructions for chain-loading U-Boot on jerry
Add instructions for chromebook_jerry.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-09 13:45:34 -06:00
Simon Glass
ed54b1918e rockchip: jerry: Add a .its file for chromium
Add a sample .its file for booting U-Boot on a jerry Chromebook.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-09 13:45:33 -06:00
Simon Glass
c9af6673e8 README: Add instructions for chain-loading U-Boot
Most Chromebooks support chain-loading U-Boot but instructions are
somewhat scattered. Add a README to hold this information within the
U-Boot tree. Also add the standard developer keys to simplify the
instructions, since they are small.

For now this only supports nyan-big.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-09 13:39:34 -06:00
Simon Glass
13bdce8f8c tegra: nyan-big: Add a .its file for chromium
Add a sample .its file for booting U-Boot on a nyan-big Chromebook.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-09 13:39:34 -06:00
Kever Yang
4f3dc8806e MAINTAINERS: git-mailrc: update maintainer for Rockchip
Send patch to Kever Yang instead of Lin Huang for Rockchip patches,
for Lin is not always working on upstream U-Boot.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Changed , to : in subject:
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-07 07:29:22 -06:00
Bin Meng
f8f291b096 x86: baytrail: Change lpe/lpss-sio/scc FSP properties to integer
At present lpe/lpss-sio/scc FSP properties are all boolean, but in
fact for "enable-lpe" it has 3 possible options. This adds macros
for these options and change the property from a boolean type to
an integer type, and change their names to explicitly indicate what
the property is really for.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05 08:55:22 +08:00
Bin Meng
5e74e5a682 x86: baytrail: Use macros instead of magic numbers for FSP settings
Introduce various meaningful macros for FSP settings and switch over
to use them instead of magic numbers.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05 08:55:22 +08:00
Bin Meng
6702488cfa x86: baytrail: Remove "serial-debug-port-*" settings
"serial-debug-port-address" and "serial-debug-port-type" settings
are actually reserved in the FSP UPD data structure. Remove them.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05 08:55:22 +08:00
Philipp Tomsich
de59d10cd0 doc: document u-boot, mmc-env-offset and u-boot, mmc-env-offset-redund
Adding documentation on the new config properties:
       'u-boot,mmc-env-offset' - overrides CONFIG_ENV_OFFSET
       'u-boot,mmc-env-offset-redundant'
                               - overrides CONFIG_ENV_OFFSET_REDUND

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-05-29 17:28:52 +09:00
Tom Rini
711391131c Merge git://git.denx.de/u-boot-sunxi
trini: Make Kconfig SPL_xxx entires only show if SPL, so that we don't
get Kconfig errors on platforms without SPL, ie sandbox (without SPL).

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22 19:20:28 +00:00
Simon Glass
59e12a4a8c fs: Kconfig: Add a separate option for FS_JFFS2
Rather than using CMD_JFFS2 for both the filesystem and its command, we
should have a separate option for each. This allows us to enable JFFS2
support without the command, if desired, which reduces U-Boot's size
slightly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-22 12:45:31 -04:00
Andre Przywara
411cf32d20 SPL: FIT: allow loading multiple images
So far we were not using the FIT image format to its full potential:
The SPL FIT loader was just loading the first image from the /images
node plus one of the listed DTBs.
Now with the refactored loader code it's easy to load an arbitrary
number of images in addition to the two mentioned above.
As described in the FIT image source file format description, iterate
over all images listed at the "loadables" property in the configuration
node and load every image at its desired location.
This allows to load any kind of images:
- firmware images to execute before U-Boot proper (for instance
  ARM Trusted Firmware (ATF))
- firmware images for management processors (SCP, arisc, ...)
- firmware images for devices like WiFi controllers
- bit files for FPGAs
- additional configuration data
- kernels and/or ramdisks
The actual usage of this feature would be platform and/or board specific.

Also update the FIT documentation to mention the new SPL feature and
provide an example .its file to demonstrate its features.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-05-17 23:15:43 +05:30
Bin Meng
13c9d84825 x86: Document ACPI S3 support
Now that we have ACPI S3 support on Intel MinnowMax board, document
some generic information of S3 and how to test it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Stefan Roese <sr@denx.de>
2017-05-17 17:11:46 +08:00
Tom Rini
d87f82967f omap5: Migrate CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC to Kconfig
While in theory this value could be used in places outside of "omap5"
(such as OMAP4), we only make use of it today in OMAP5, so place the
Kconfig entry there.  Given that Kconfig lets us provide a default, we
drop CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC entirely.  The contents of
doc/README.omap-reset-time make a good help entry, so adjust them
slightly and delete the file.  Move the comment about range to where we
use the value now, and have Kconfig enforce the upper bound.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-15 10:39:57 -04:00
Philipp Tomsich
f222b36751 doc: document /config/u-boot, spl-payload-offset property
This adds documentation on the u-boot,spl-payload-offset property
(which overrides CONFIG_SYS_SPI_U_BOOT_OFFS during the SPI loading in
the SPL stage, if present).

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-05-11 22:03:40 -04:00
Tom Rini
1f5541c881 Merge git://git.denx.de/u-boot-rockchip
This adds a new firefly-rk3399 board, MIPI support for rk3399 and
rk3288, rk818 pmic support, mkimage improvements for rockchip and a few
other things.
2017-05-10 17:40:11 -04:00
Tom Rini
102d86552a Merge branch 'master' of git://git.denx.de/u-boot-mips 2017-05-10 15:50:21 -04:00
Kever Yang
1df7ee573e doc: dtbinding: add pwm binding file
This is a copy from kernel.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-05-10 13:37:21 -06:00
Álvaro Fernández Rojas
632889cfe5 dm: led: add BCM6358 led driver
This driver is a simplified version of linux/drivers/leds/leds-bcm6358.c

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10 16:16:09 +02:00
Álvaro Fernández Rojas
28300dc526 dm: led: add BCM6328 led driver
This driver is a simplified version of linux/drivers/leds/leds-bcm6328.c,
simplified to remove HW leds and blink fallbacks.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10 16:16:09 +02:00
Alex Deymo
82f766d1d2 Allow boards to initialize the DT at runtime.
In some boards like the Raspberry Pi the initial bootloader will pass
a DT to the kernel. When using U-Boot as such kernel, the board code in
U-Boot should be able to provide U-Boot with this, already assembled
device tree blob.

This patch introduces a new config option CONFIG_OF_BOARD to use instead
of CONFIG_OF_EMBED or CONFIG_OF_SEPARATE which will initialize the DT
from a board-specific funtion instead of bundling one with U-Boot or as
a separated file. This allows boards like the Raspberry Pi to reuse the
device tree passed from the bootcode.bin and start.elf firmware
files, including the run-time selected device tree overlays.

Signed-off-by: Alex Deymo <deymo@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-09 20:35:06 -04:00
Vikas Manocha
fd198ee1a8 ARM: DT: stm32f7: add sdram pin contol node
Also added DT binding doc for stm32 fmc(flexible memory controller).

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08 11:39:03 -04:00
Tom Rini
3fea953698 Merge branch 'master' of git://git.denx.de/u-boot-video 2017-04-14 22:05:17 -04:00
Songjun Wu
e6a419c5f7 at91: video: DT binding for HLCDC driver
DT binding documentation for atmel HLCDC driver.

Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
2017-04-14 15:42:42 +02:00
Tom Rini
c1a16c3ab5 Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2017-04-14 09:05:57 -04:00
Stephen Arnold
8baa17832f ARM: socfpga: add fpga build and bsp handoff instructions to readme
This patch adds the steps to manually (re)build a Quartus FPGA project,
generate the required BSP glue, and update u-boot handoff files for
mainline SPL support. Requires Quartus toolchain and current U-Boot.

Signed-off-by: Steve Arnold <stephen.arnold42@gmail.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
2017-04-14 14:06:38 +02:00
Tom Rini
1622559066 Merge branch 'master' of git://www.denx.de/git/u-boot-imx
Drop CONFIG_STACKSIZE from include/configs/imx6_logic.h

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-13 11:19:00 -04:00
Simon Glass
f1683aa73c board_f: Rename initdram() to dram_init()
This allows us to use the same DRAM init function on all archs. Add a
dummy function for arc, which does not use DRAM init here.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Dummy function on nios2]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-13 09:40:57 -04:00
Madan Srinivas
4fce6554dc doc: Updates info on using Keystone2 secure devices
Add a section describing the secure boot image used on
Keystone2 secure devices.

Signed-off-by: Madan Srinivas <madans@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-04-08 21:35:06 -04:00
Marek Vasut
fcea480d1d ARM: mxs: Rename M28EVK
The board is now manufactured by Aries Embedded GmbH , rename it.

Signed-off-by: Marek Vasut <marex@denx.de>
2017-04-05 18:12:04 +02:00
Jernej Skrabec
7da8680b26 rockchip: Add support for MiQi rk3288 board
MiQi is rk3288 based development board with 1 or 2 GB SDRAM, 16 GB eMMC,
micro SD card interface, 4 USB 2.0 ports, HDMI, gigabit Ethernet and
expansion ports.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Eddie Cai <eddie.cai.linux@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-04-04 20:01:57 -06:00
Jernej Skrabec
43b5c78d8d rockchip: cosmetic: Sort RK3288 boards
Sort rk3288 boards in alphabetical order.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Eddie Cai <eddie.cai.linux@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-04-04 20:01:57 -06:00
Philipp Tomsich
d02d11f8ae rockchip: rk3399: spl: make SPL boot-order configurable via /chosen
The RK3399 does not have any boot selection pins and the BootROM probes
the boot interfaces using the following boot-order:
    1. SPI
    2. eMMC (sdhci in DTS)
    3. SD card (sdmmc in DTS)
    4. USB loader
For ease of deployment, the SPL stage should mirror the boot order of
the ROM and use the same probing order (assuming that valid images can
be detected by SPL) unless instructed otherwise.  The boot-order can
then be configured via the 'u-boot,spl-boot-order' property in the
chosen-node of the DTS.

While this approach is easily extensible to other boards, it is only
implemented for the RK3399 for now, as the large SRAM on the RK3399
makes this easy to fit the needed infrastructure into SPL and our
production setup already runs with DM, OF_CONTROL and BLK in SPL.

The new boot-order property is expected to be used in conjunction with
FIT images (and all legacy image formats disabled via Kconfig).

A boot-sequence with probing and fallthroughs from SPI via eMMC to SD
card (i.e. &spiflash, &sdhci, &sdmmc) has been validated on the RK3399-Q7.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-04-04 20:01:57 -06:00
Heiko Stübner
f46b859bfb rockchip: rk3188: add README.rockchip paragraph describing sd boot
Building sd images for rk3188 requires more steps due to the needed split
into TPL and SPL as loaders. Describe how to build an image for it in a
separate paragraph in the READER.rockchip file.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2017-04-04 20:01:57 -06:00
Hannes Schmelzer
db40c1aa1c drivers/net/phy: add fixed-phy / fixed-link support
This patch adds support for having a "fixed-link" to some other MAC
(like some embedded switch-device).

For this purpose we introduce a new phy-driver, called "Fixed PHY".

Fixed PHY works only with CONFIG_DM_ETH enabled, since the fixed-link is
described with a subnode below ethernet interface.

Most ethernet drivers (unfortunately not all are following same scheme
for searching/attaching phys) are calling "phy_connect(...)" for getting
a phy-device.
At this point we link in, we search here for a subnode called "fixed-
link", once found we start phy_device_create(...) with the special phy-
id PHY_FIXED_ID (0xa5a55a5a).

During init the "Fixed PHY" driver has registered with this id and now
gets probed, during probe we get all the details about fixed-link out of
dts, later on the phy reports this values.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-03-26 09:58:26 -05:00
Tom Rini
5cf618ee60 Merge git://git.denx.de/u-boot-arc
This replaces legacy arch/arc/lib/timer.c implementation and allows us
to describe ARC Timers in Device Tree. Among other things that way we
may properly inherit Timer's clock from CPU's clock s they really run
synchronously.
2017-03-24 08:19:30 -04:00
Vlad Zakharov
ad9b5f77df drivers: timer: Introduce ARC timer driver
This commit introduces timer driver for ARC.

ARC timers are configured via ARC AUX registers so we use special
functions to access timer control registers.

This driver allows utilization of either timer0 or timer1
depending on which one is available in real hardware. Essentially
only existing timers should be mentioned in board's Device Tree
description.

Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-24 14:20:55 +03:00
mario.six@gdsys.cc
2a792753d6 dm: Add callback to modify the device tree
Certain boards come in different variations by way of utilizing daughter
boards, for example. These boards might contain additional chips, which
are added to the main board's busses, e.g. I2C.

The device tree support for such boards would either, quite naturally,
employ the overlay mechanism to add such chips to the tree, or would use
one large default device tree, and delete the devices that are actually
not present.

Regardless of approach, even on the U-Boot level, a modification of the
device tree is a prerequisite to have such modular families of boards
supported properly.

Therefore, we add an option to make the U-Boot device tree (the actual
copy later used by the driver model) writeable, and add a callback
method that allows boards to modify the device tree at an early stage,
at which, hopefully, also the application of device tree overlays will
be possible.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-03-23 15:46:23 +01:00
Konstantin Porotchkin
81192b7966 mvebu: usb: xhci: Add VBUS regulator supply to the host driver
The USB device should linked to VBUS regulator through "vbus-supply"
DTS property.
This patch adds handling for "vbus-supply" property inside the USB
device entry for turning on the VBUS regulator upon the host adapter probe.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-03-23 08:45:25 +01:00
Konstantin Porotchkin
130b53ec79 mvebu: pcie: Add support for GPIO reset for PCIe device
Add support for "marvell,reset-gpio" property to mvebu DW PCIe
driver.
This option is valid when CONFIG_DM_GPIO=y

Change-Id: Ic17c500449050c2fbb700731f1a9ca8b83298986
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-03-23 08:45:25 +01:00
Philipp Tomsich
e7dd02e377 part_efi: document device-tree binding for part_efi configuration
This adds documentation on the u-boot,efi-partition-entries-offset
property (which overrides CONFIG_EFI_PARTITION_ENTRIES_OFF, if
present).

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-20 18:04:40 -04:00
Philipp Tomsich
399f3afa37 doc: move documentation for /config node into a separate file
This moves the description of the /config node from README.fdt-control
into a separate file doc/device-tree-bindings/config.txt.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-20 18:04:35 -04:00
Tom Rini
f9515756b6 Merge git://git.denx.de/u-boot-rockchip
This includes support for rk3188 from Heiko Stübner and and rk3328 from
Kever Yang.  Also included is SPL support for rk3399 and a fix for
rk3288 to get it booting again (spl_early_init()).
2017-03-17 14:15:17 -04:00
Vikas Manocha
94d5308412 PINCTRL: stm32f7: add pin control driver
This driver uses the same pin control binding as that of linux, binding
document of this patch is copied from linux. One addition done is for
GPIO input and output mode configuration which was missing.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-17 14:15:14 -04:00
Vikas Manocha
712f99a5dd clk: stm32f7: add clock driver for stm32f7 family
add basic clock driver support for stm32f7 to enable clocks required by
the peripherals.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-17 14:15:12 -04:00
Kever Yang
fa437430ad rockchip: arm64: rk3399: add ddr controller driver
RK3399 support DDR3, LPDDR3, DDR4 sdram, this patch is porting from
coreboot, support 4GB lpddr3 in this version.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Added rockchip: tag:
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-03-16 16:03:45 -06:00
Heiko Stübner
27326c7ee2 dm: allow limiting pre-reloc markings to spl or tpl
Right now the u-boot,dm-pre-reloc flag will make each marked node
always appear in both spl and tpl. But systems needing an additional
tpl might have special constraints for each, like the spl needing to
be very tiny.

So introduce two additional flags to mark nodes for only spl or tpl
environments and introduce a function dm_fdt_pre_reloc to automate
the necessary checks in code instances checking for pre-relocation
flags.

The behaviour of the original flag stays untouched and still marks
a node for both spl and tpl.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-03-16 16:03:44 -06:00
Masahiro Yamada
cf3175bcd8 ARM: uniphier: update README.uniphier for latest build instruction
Since commit c0efc3140e ("ARM: uniphier: change CONFIG_SPL_PAD_TO
to 128KB"), the u-boot.bin should be burned at the offset 0x20000.
I missed to update README.uniphier in that commit.  Now updating.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-23 08:37:56 +09:00
Eddie Cai
6f27976455 rockchip: rename miniarm to tinker board
Miniarm is the internal project code. Now it is officially named Tinker board.
So rename it.

Signed-off-by: Eddie Cai <eddie.cai@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-09 12:10:59 -07:00
Simon Glass
e160f7d430 dm: core: Replace of_offset with accessor
At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-08 06:12:14 -07:00
Tom Rini
43ade93bdb Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2017-02-01 16:34:25 -05:00
Tom Rini
f77309d343 Merge git://www.denx.de/git/u-boot-marvell 2017-02-01 06:57:35 -05:00
Mario Six
a1b6b0a9c1 arm: mvebu: Implement secure boot
The patch implements secure booting for the mvebu architecture.

This includes:
- The addition of secure headers and all needed signatures and keys in
  mkimage
- Commands capable of writing the board's efuses to both write the
  needed cryptographic data and enable the secure booting mechanism
- The creation of convenience text files containing the necessary
  commands to write the efuses

The KAK and CSK keys are expected to reside in the files kwb_kak.key and
kwb_csk.key (OpenSSL 2048 bit private keys) in the top-level directory.

Signed-off-by: Reinhard Pfau <reinhard.pfau@gdsys.cc>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-01 09:04:18 +01:00
Masahiro Yamada
54925327fa mmc: move CONFIG_GENERIC_MMC to Kconfig
Now, CONFIG_GENERIC_MMC seems equivalent to CONFIG_MMC.

Let's create an entry for "config GENERIC_MMC" with "default MMC",
then convert all macro defines in headers to Kconfig.  Almost all
of the defines will go away.

I see only two exceptions:
  configs/blanche_defconfig
  configs/sandbox_noblk_defconfig

They define CONFIG_GENERIC_MMC, but not CONFIG_MMC.  Something
might be wrong with these two boards, so should be checked later.

Anyway, this is the output of the moveconfig tool.

This commit was created as follows:

[1] create a config entry in drivers/mmc/Kconfig

[2] tools/moveconfig.py -r HEAD GENERIC_MMC

[3] manual clean-up of garbage comments in doc/README.* and
    include/configs/*.h

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-31 21:50:47 +09:00
Michael Kurz
b1a8de7e07 ARM: DTS: stm32: add stm32f746-disco device tree files
This patch adds the DTS source files needed for stm32f746-disco board
The files are based on the stm32f429/469 files from current linux
kernel.

Source for "arch/arm/dts/armv7-m.dtsi": Linux: "arch/arm/boot/dts/armv7-m.dtsi"

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
2017-01-28 14:04:42 -05:00
Fabio Estevam
7a037cc91f README: mxc_hab: Adapt the CONFIG_SECURE_BOOT text to Kconfig
Commit 6e1f4d2652 ("arm: imx-common: add SECURE_BOOT option to
Kconfig") moved the CONFIG_SECURE_BOOT option to Kconfig, so update
the mxc_hab README file to reflect that.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
2017-01-27 10:34:14 +01:00
Masahiro Yamada
2c2ab3d495 ARM: uniphier: add PXs3 SoC support
Initial support for PXs3 SoC.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22 16:49:34 +09:00
Uri Mashiach
79267edd10 status_led: Kconfig migration - introduction
Move all of the status LED feature to drivers/led/Kconfig.
doc/README.LED updated to reflect the Kconfig implementation.

Tested boards: CL-SOM-AM57x, CM-T335

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2017-01-21 15:12:33 -05:00
Tom Rini
f253f2933b Merge branch 'master' of git://git.denx.de/u-boot-video 2017-01-16 20:23:14 -05:00
George McCollister
f1ca1fdebf mkimage: Add support for signing with pkcs11
Add support for signing with the pkcs11 engine. This allows FIT images
to be signed with keys securely stored on a smartcard, hardware security
module, etc without exposing the keys.

Support for other engines can be added in the future by modifying
rsa_engine_get_pub_key() and rsa_engine_get_priv_key() to construct
correct key_id strings.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
2017-01-14 16:47:13 -05:00
tomas.melin@vaisala.com
db1b79b886 splash: add support for loading splash from a FIT image
Enable support for loading a splash image from within a FIT image.
The image is assumed to be generated with mkimage -E flag to hold
the data external to the FIT.

Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2017-01-13 17:40:38 +01:00
Sjoerd Simons
35a05761a1 rockchip: Drop Ethernet from the TODO
Now that ethernet support works, it can be dropped from the rockchip
TODO

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-01-11 20:24:19 -07:00
Masahiro Yamada
ae4c81e942 mmc: move DesignWare-based drivers to Kconfig
Move (and rename) the following CONFIG options to Kconfig:

  CONFIG_EXYNOS_DWMMC  (renamed to CONFIG_MMC_DW_EXYNOS)
  CONFIG_HIKEY_DWMMC   (renamed to CONFIG_MMC_DW_K3)
  CONFIG_SOCFPGA_DWMMC (renamed to CONFIG_MMC_DW_SOCFPGA)

The "HIKEY" is a board name, so it is not suitable for the MMC
controller name.  I am following the name used in Linux.

This commit was generated as follows:

[1] Rename the config options with the following command:
find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e '
s/CONFIG_EXYNOS_DWMMC/CONFIG_MMC_DW_EXYNOS/g
s/CONFIG_HIKEY_DWMMC/CONFIG_MMC_DW_K3/g
s/CONFIG_SOCFPGA_DWMMC/CONFIG_MMC_DW_SOCFPGA/g
'

[2] Commit the changes

[3] Create the entries in drivers/mmc/Kconfig
    (with default y for EXYNOS and SOCFPGA)

[4] Run the following:
tools/moveconfig.py -y -r HEAD MMC_DW_EXYNOS MMC_DW_K3 MMC_DW_SOCFPGA

[5] Sort and align drivers/mmc/Makefile for readability

[6] Clean-up doc/README.socfpga by hand

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2017-01-11 19:40:15 +09:00
Masahiro Yamada
55ed3b4698 mmc: move CONFIG_DWMMC to Kconfig, renaming to CONFIG_MMC_DW
This commit was created as follows:

[1] Rename the option with the following command:
find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e 's/CONFIG_DWMMC/CONFIG_MMC_DW/g'

[2] create the entry for MMC_DW in drivers/mmc/Kconfig
    (the prompt and help were copied from Linux)

[3] run "tools/moveconfig.py -y MMC_DW"

[4] add "depends on MMC_DW" to the MMC_DW_ROCKCHIP entry

[5] Clean-up doc/README.socfpga by hand

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2017-01-11 19:40:14 +09:00
Masahiro Yamada
b1b1add38c ARM: socfpga: remove unused CONFIG option and cleanup README.socfpga
CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH is defined in the socfpga_common.h,
but not referenced at all.  Remove.

Also, clean-up the README.socfpga.  CONFIG_MMC should not be defined
in the header since it was moved to Kconfig by commit c27269953b
("mmc: complete unfinished move of CONFIG_MMC").  I see no grep hit
for the others.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2017-01-11 19:40:14 +09:00
Tom Rini
516457013e Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2017-01-02 16:32:05 -05:00
Robert P. J. Day
66723eda4e doc/README.cfi: Update code snippet, and add example.
First, update the code snippet referenced in the README file. And
since there are only two boards that override flash_cmd_reset(),
might as well show them both.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2017-01-02 11:14:01 -05:00
Sven Ebenfeld
1f6a664802 Makefile: preserve output for images that can contain HAB Blocks
To being able to sign created binaries, we need to know the HAB Blocks
for that image. Especially for the imximage type the HAB Blocks are
only available during creation of the image. We want to preserve the
information until we get to sign the files.
In the verbose case we still get them printed out instead of writing
to log files.

Cc: sbabic@denx.de

v2-Changes:
 - No usage of MKIMAGEOUTPUT_$(@F) macro.
 - Predefine default value /dev/null in every involved Makefile.

Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
2017-01-02 17:07:39 +01:00
Sven Ebenfeld
3de6c7fc00 doc: imx6: add section for secure boot with SPL
Cc: sbabic@denx.de

Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
2017-01-02 17:07:21 +01:00
Jaehoon Chung
6e1cfb099a MAINTAINERS, git-mailrc: update the Power maintainer
Przemyslaw didn't maintain the PMIC anymore.
Update the pmic maintainer from Przeymyslaw to me.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-27 11:24:15 -05:00
Vignesh R
bd2e9714c8 regulator: fixed: Add support to handle enable-active-high DT property
Add support to handle enable-active-high DT property. This property is
used to drive the gpio controlling fixed regulator as active high when
claiming gpio line.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-12-27 08:22:57 -05:00
Konstantin Porotchkin
0d92f2141a arm64: mvebu: Fix A8K memory mapping and add documentation
Fix the MMU mapping for A8K device family:
 - Separate A7K and A8K memory mappings
 - Fix memory regions by including IO mapping for all
   3 PCIe interfaces existing on each connected CP110 controller
Add A8K memory mapping documentation with all regions
configured by Marvell ATF.

Change-Id: I9c930569b1853900f5fba2d5db319b092cc7a2a6
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
2016-12-21 09:52:35 +01:00
Konstantin Porotchkin
f99386c5b1 arm64: mvebu: Add pin control nodes to A8K family DTS files
Add pin control nodes to APN806, CP-master, CP-slave and
Armada-7040 and Armada-8040 boards DTS files

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-12 09:04:52 +01:00
Konstantin Porotchkin
656e6cc86b arm64: mvebu: pinctrl: Add pin control driver for A8K family
Add a DM port of Marvell pin control driver.
The A8K SoC family contains several silicone dies interconnected
in a single package. Every die is normally equipped with its own
pin controller unit.
There are 2 pin controllers in A70x0 SoC and 3 in A80x0 SoC.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-12 09:04:52 +01:00
Konstantin Porotchkin
fa61ef6b49 arm64: mvebu: Add bubt command for flash image burn
Add support for mvebu bubt command for flash image
load, check and burn on boot device.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-12 09:04:52 +01:00
Dinh Nguyen
6fa0d34572 MAINTAINERS: socfpga: update email address for Dinh Nguyen
With the acquisition of Altera by Intel, my Altera email may be going
away soon. Update the contact to a more reliable address.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2016-12-06 01:45:58 +01:00
Simon Glass
6ccb410124 dm: Add timeline and guide for porting I2C drivers
Add a README with a brief guide to porting i2c drivers over to use driver
model.

Add a timeline also. All I2C drivers should be converted by the end
of June 2017.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2016-12-05 13:28:12 +01:00
Tom Rini
194eded14c Merge git://git.denx.de/u-boot-mpc85xx 2016-12-04 13:55:15 -05:00
Simon Glass
ebb2c53585 serial: Drop the s3c24x0 serial driver
This is not used by any boards. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Müller <d.mueller@elsoft.ch>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-12-04 13:55:00 -05:00
Simon Glass
8ff89f8db8 serial: Update docs to indicate mcfuart supports DM_SERIAL
This driver was converted so we should remove it from the list.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-04 13:54:59 -05:00
Andrew F. Davis
d7be50921e image: Add FIT image loadable section custom processing
To help automate the loading of custom image types we add the ability
to define custom handlers for the loadable section types. When we find
a compatible type while loading a "loadable" image from a FIT image we
run its associated handlers to perform any additional steps needed for
loading this image.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-03 13:21:19 -05:00
York Sun
830fc1bfe7 powerpc: mpc85xx: Convert CONFIG_SYS_CCSRBAR_DEFAULT to Kconfig option
Move default value definitions to to Kconfig SYS_CCSRBAR_DEFAULT.

Signed-off-by: York Sun <york.sun@nxp.com>
2016-12-02 08:52:34 -08:00