Commit graph

1004 commits

Author SHA1 Message Date
Neil Armstrong
c823f2438c video: add TDO tl070wsh30 panel driver
This adds support for the TDO TL070WSH30 TFT-LCD panel module.
The panel has a 1024×600 resolution and uses 24 bit RGB per pixel.
It provides a MIPI DSI interface to the host, a built-in LED backlight
and touch controller.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Patrice Chotard
0f8106f8e0 treewide: Update email address Patrick Delaunay and Patrice Chotard
Update Patrick and my email address with the one dedicated to
upstream activities.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-12-09 10:57:50 +01:00
Tom Rini
530dcdd07c - Clock fix MMC driver for SM1 based platforms
- sync SOC Ids from Linux 5.10-rc1
 - fix potential build warning on meson_dw_hdmi and meson-g12a-usb2 phy
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl+yUlUACgkQd9zb2sjI
 SdE/qg/+LFGSw26m9u0G9Umfpogy0DW73aJv/MOA3xcEyk7k2Cc6lJ6agk2oll7v
 6Uus8zZXWnPOQ/M2utELGIXBqP9J9i+I6JdGb5t7e0NqpzJqJiVUWIeuuDg9zSqP
 ZZmw3JoNRsMsrUBxJREOM2ERFYhYUkNM0EK7mRzoKs7kKYiJ4TsjeXpuDyxvZQ1o
 La9BGyiAAB+n3hRs1mjQ/lwO5M1nZgSNt3Krw61L9YOV+ahP7+F5FRJksW7Sgv5X
 /3DGm8eqsqVP8mNqZW55yp45uUVE4ZL98yibBLRJONW5/cKjUyGlnxy6Vy6OXDP4
 eXZzYct2nlIMNAbCjB49WoUxxbjg4eLPxSIGGLRdVJliYNOFXIgqEnsFCq7Zlare
 rLQc+TSl0pM+mWKjGchLxMxrA6D5F6ERjIwTukDEjkNQcsXNQkUGC0IKcUM0x7Rf
 N6+eMXBgWYIjgFLXju+B+dZgrDA0BdXs9oaok1idIxBgWqIQ3o4EyIk1sWIHcb/1
 8HL9XEd8oC3G1G4T3Ze++9sUd4MgA3ELOiCQapx7zh/gPDYaYr9yfr2WyRcoMcqK
 Dwlo9os2q0nfOmg6qcmyN5R0flGEDEtBB6/hj2v2mvj9qMA66kSfsMfkqSVbYSZg
 6Kt+ScmKYNpCZiFHX1yUygBHgexvWxxPqhm5eV4gd4/7cNWkCwM=
 =oTd7
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20201116' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- Clock fix MMC driver for SM1 based platforms
- sync SOC Ids from Linux 5.10-rc1
- fix potential build warning on meson_dw_hdmi and meson-g12a-usb2 phy
2020-11-16 10:50:32 -05:00
Alper Nebi Yasak
a355ece8e6 video: rockchip: Restrict EDP, VOP, MIPI files to GPL-2.0
These files have a lot of code in common with their counterparts in
coreboot, especially in their earlier revisions:

                  U-Boot                  |                  coreboot
    --------------------------------------|--------------------------------------------
    drivers/video/rockchip/:              | src/soc/rockchip/:
    - rk_edp.c          (GPL-2.0+)        | - common/edp.c          (GPL-2.0-only)
       "                                  | - rk3288/display.c      (GPL-2.0-only)
       "                                  | - rk3399/display.c      (GPL-2.0-only)
    - rk_hdmi.h         (GPL-2.0+)        | (none)
    - rk_hdmi.c         (GPL-2.0+)        | - rk3288/hdmi.c         (GPL-2.0-or-later)
    - rk3288_hdmi.c     (GPL-2.0+)        | - rk3288/hdmi.c         (GPL-2.0-or-later)
    - rk3399_hdmi.c     (GPL-2.0+)        | (none)
    - rk_mipi.h         (GPL-2.0+)        | (none)
    - rk_mipi.c         (GPL-2.0+)        | - rk3399/mipi.c         (GPL-2.0-only)
    - rk3288_mipi.c     (GPL-2.0+)        | - rk3399/mipi.c         (GPL-2.0-only)
    - rk3399_mipi.c     (GPL-2.0+)        | - rk3399/mipi.c         (GPL-2.0-only)
    - rk_lvds.c         (GPL-2.0+)        | (none)
    - rk_vop.h          (GPL-2.0+)        | (none)
    - rk_vop.c          (GPL-2.0+)        | - common/vop.c          (GPL-2.0-only)
    - rk3288_vop.c      (GPL-2.0+)        | - common/vop.c          (GPL-2.0-only)
    - rk3399_vop.c      (GPL-2.0+)        | (none)
                                          |
    arch/arm/include/asm/arch-rockchip/:  | src/soc/rockchip/*/include/soc/*:
    - edp_rk3288.h      (GPL-2.0+)        | - common/.../edp.h      (GPL-2.0-only)
       "                                  | - rk3288/.../display.h  (GPL-2.0-only)
       "                                  | - rk3399/.../display.h  (GPL-2.0-only)
    - vop_rk3288.h      (GPL-2.0+)        | - common/.../vop.h      (GPL-2.0-only)

Restrict the licenses to match coreboot's so that changes from coreboot
can be imported to U-Boot as necessary. HDMI files are already 2.0+
there and rk_lvds.c has no counterpart, so keep them as is.

Cc: Simon Glass <sjg@chromium.org>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Eric Gao <eric.gao@rock-chips.com>
Cc: Jacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-11-13 18:16:11 +08:00
Jaehoon Chung
fe76c4207e video: meson: meson_dw_hdmi: fix the potential build warning
Fix the potential build warning.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-11-12 14:27:38 +01:00
Tom Rini
2c31d7e746 Merge tag 'u-boot-rockchip-20201031' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- New PX30 board: Engicam PX30.Core;
- Fix USB HID support for rock960;
- Remove host endianness dependency for rockchip mkimage;
- dts update for rk3288-tinker;
- Enable console MUX for some ROCKPi boards;
- Add config-based ddr selection for px30;
2020-10-30 23:13:13 -04:00
Jagan Teki
9abece3985 video: rockchip: Support 4K resolution for rk3288, HDMI
Like, rk3399 the rk3288 also supports 4K resolution.

So, enable it for rk3288 with HDMI platforms.

Right now, rockchip video drivers are supporting for rk3288,
rk3399 SoC families, so mark the 4K resolution by default
if it's an HDMI video out.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Cc: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30 23:09:01 +08:00
Alper Nebi Yasak
127c8d85cf video: rockchip: Add missing dpcd_write() call to link_train_ce()
Found this by comparing it to the coreboot driver, a form of this call
was introduced there in their commit b9a7877568cf ("rockchip/*: refactor
edp driver"). This is copy-pasted from U-Boot's link_train_cr() slightly
above it.

Without this on a gru-kevin chromebook, I have:

    clock recovery at voltage 0 pre-emphasis 0
    requested signal parameters: lane 0 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 1 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 2 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 3 voltage 0.4V pre_emph 3.5dB
    using signal parameters: voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 0 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 1 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 2 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 3 voltage 0.4V pre_emph 3.5dB
    using signal parameters: voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 0 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 1 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 2 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 3 voltage 0.4V pre_emph 3.5dB
    using signal parameters: voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 0 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 1 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 2 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 3 voltage 0.4V pre_emph 3.5dB
    using signal parameters: voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 0 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 1 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 2 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 3 voltage 0.4V pre_emph 3.5dB
    using signal parameters: voltage 0.4V pre_emph 3.5dB
    channel eq failed, ret=-5
    link train failed!
    rk_vop_probe() Device failed: ret=-5

With this, it looks like training succeeds:

    clock recovery at voltage 0 pre-emphasis 0
    requested signal parameters: lane 0 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 1 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 2 voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 3 voltage 0.4V pre_emph 3.5dB
    using signal parameters: voltage 0.4V pre_emph 3.5dB
    requested signal parameters: lane 0 voltage 0.4V pre_emph 6dB
    requested signal parameters: lane 1 voltage 0.4V pre_emph 6dB
    requested signal parameters: lane 2 voltage 0.4V pre_emph 6dB
    requested signal parameters: lane 3 voltage 0.4V pre_emph 6dB
    using signal parameters: voltage 0.4V pre_emph 6dB
    requested signal parameters: lane 0 voltage 0.4V pre_emph 0dB
    requested signal parameters: lane 1 voltage 0.4V pre_emph 0dB
    requested signal parameters: lane 2 voltage 0.4V pre_emph 0dB
    requested signal parameters: lane 3 voltage 0.4V pre_emph 0dB
    using signal parameters: voltage 0.4V pre_emph 0dB
    channel eq at voltage 0 pre-emphasis 0
    config video failed
    rk_vop_probe() Device failed: ret=-110

The "config video failed" error also goes away when I disable higher
log levels, and it claims to have successfully probed the device.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30 18:20:03 +08:00
Anatolij Gustschin
9dec5a0ea1 nokia_rx51: disable obsolete VIDEO config
Disable VIDEO config to fix DM_VIDEO conversion
deadline warning.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-10-26 20:55:51 +01:00
Anatolij Gustschin
8c9940d5ec eb_cpu5282: fix CONFIG_DM_VIDEO build warnings
Remove CONFIG_VIDEO dependency to fix board removal warnings.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Jens Scharsig <esw@bus-elektronik.de>
2020-10-26 20:55:29 +01:00
Patrick Delaunay
8fc78fc73b configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs
Done with:
./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18 15:27:01 +02:00
Patrick Delaunay
f9a48654ee configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigs
Done with:
./tools/moveconfig.py VIDEO_BMP_RLE8

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18 15:26:14 +02:00
Patrick Delaunay
0ed6c0f9cb configs: migrate CONFIG_VIDEO_BMP_GZIP to defconfigs
Done with:
./tools/moveconfig.py VIDEO_BMP_GZIP

The 3 suspicious migration because CMD_BMP and SPLASH_SCREEN
are not activated in these defconfigs:
- trats_defconfig
- s5pc210_universal_defconfig
- trats2_defconfig

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18 15:25:28 +02:00
Dario Binacchi
76c2ff3e5f video: backlight: fix pwm's duty cycle calculation
For levels equal to the maximum value, the duty cycle must be equal to
the period.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18 15:07:33 +02:00
Dario Binacchi
f9b94055bd video: backlight: fix pwm data structure description
The description of the 'max_level' field was incorrectly assigned to the
'min_level' field.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-10-18 15:06:56 +02:00
Neil Armstrong
01c9857fa8 video: dw-mipi-dsi: permit configuring the escape clock rate
The Amlogic D-PHY in the Amlogic AXG SoC Family does support a frequency
higher than 10MHz for the TX Escape Clock, thus make the target rate
configurable.

This is based on the Linux commit [1] and adapted to the U-Boot driver.

[1] a328ca7e4af3 ("drm/bridge: dw-mipi-dsi: permit configuring the escape clock rate")

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-18 10:36:05 +02:00
Neil Armstrong
b53c122631 video: dw-mipi-dsi: driver-specific configuration of phy timings
The timing values for dw-dsi are often dependent on the used display and
according to Philippe Cornu will most likely also depend on the used phy
technology in the soc-specific implementation.

To solve this and allow specific implementations to define them as needed
add a new get_timing callback to phy_ops and call this from the dphy_timing
function to retrieve the necessary values for the specific mode.

This is based on the Linux commit [1] and adapted to the U-Boot driver.

[1] 25ed8aeb9c39 ("drm/bridge/synopsys: dsi: driver-specific configuration of phy timings")

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-18 10:35:06 +02:00
Tom Rini
b7e7831e5d Merge branch 'next'
Bring in the assorted changes that have been staged in the 'next' branch
prior to release.

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-05 14:10:59 -04:00
Patrick Delaunay
a04616be1b video: stm32_dsi: Convert to use APIs which support live DT
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the
driver can support live DT.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
2020-10-02 15:05:14 +02:00
Patrick Delaunay
28c6ba861c video: stm32_ltdc: Convert to use APIs which support live DT
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the
driver can support live DT.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-10-02 15:05:14 +02:00
Sean Anderson
4723fd58dc video: stm32: Fix not calling dev_xxx with a device
There is no member `dev` in dw_mipi_dsi, but there is one in mipi_dsi_host,
so use that.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-30 08:54:03 -04:00
Heinrich Schuchardt
f644081d38 video: typo Normlly
%s/Normlly/Normally/

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-29 13:19:08 -04:00
Stefan Roese
063d547cac video: cfb_console.c: Use bi_dram[] values on all platforms
All platforms support bi_dram[] since quite some time. Lets remove the
and bi_memsize values completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-26 09:19:50 +02:00
Simon Glass
35bd70c510 Convert CONFIG_SPLASH_SCREEN et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPLASH_SCREEN
   CONFIG_SPLASH_SCREEN_ALIGN
   CONFIG_SPLASHIMAGE_GUARD
   CONFIG_SPLASH_SOURCE

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23 13:43:10 -04:00
Tom Rini
f1c0b7cd4b For 2020.10
-----------
 
 - fixes for Toradex board
 - fix warnings from previous PR
 - HAB: reset instead of panic after failure
 - new board:  MYiR Tech MYS-6ULX
 - mx6cuboxi: use OF_PLATDATA
 - further changes for DM
 
 Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/714513163
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCXykjtQ8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76a1WQCcD+objdS+90mDdT0yTpW3jHS4YiwAn2V2rTTo
 4hKj5yxRg3cvb/pBAmbQ
 =TyRs
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200804' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

For 2020.10
-----------

- fixes for Toradex board
- fix warnings from previous PR
- HAB: reset instead of panic after failure
- new board:  MYiR Tech MYS-6ULX
- mx6cuboxi: use OF_PLATDATA
- further changes for DM

Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/714513163
2020-08-04 11:11:02 -04:00
Anatolij Gustschin
3ce83ee012 video: ipuv3: fix framebuffer base address init with multiple IPUs
Since commit 7812bbdc37 ("video: Correctly handle multiple
framebuffers") the vidconsole output is missing on the primary
display on boards with two IPU units (all i.MX6Q/D based boards).
The base address of the allocated framebuffer is not correctly
programmed in the display controller. Fix it.

Reported-by: Soeren Moch <smoch@web.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Soeren Moch <smoch@web.de>
2020-08-03 23:37:31 +02:00
Walter Lozano
24968d9e5f drivers: rename more drivers to match compatible string
Continuing with the approach in commit <addf358bac1d2bd0> rename
additional drivers to allow the OF_PLATDATA support.

Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-02 14:51:08 +02:00
Stefan Bosch
e1e96ba6a2 video: add nexell video driver (display/video driver)
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- nexell_display.c: Changed to DM, CONFIG_FB_ADDR can not be used
  anymore because framebuffer is allocated by video_reserve() in
  video-uclass.c. Therefore code changed appropriately.
- '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where
  possible (and similar).
- livetree API (dev_read_...) is used instead of fdt one (fdt...).

Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29 08:43:40 -04:00
Stefan Bosch
9c5d377583 video: add nexell video driver (soc: dpc, makefile)
Low level functions for DPC (Display Controller) and Makefile for all
nexell video low level functions.

Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29 08:43:40 -04:00
Stefan Bosch
ee647449c0 video: add nexell video driver (soc: lvds, hdmi)
Low level functions for LVDS and HDMI display interfaces.

Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29 08:43:40 -04:00
Stefan Bosch
6390378408 video: add nexell video driver (soc: mlc, mipi)
Low level functions for MLC (Multi Layer Control) and MIPI (Mobile
Industry Processor Interface).

Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29 08:43:40 -04:00
Stefan Bosch
af65f28a3a video: add nexell video driver (soc: displaytop)
Low level functions for DisplayTop (Display Topology).

Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29 08:43:40 -04:00
Masahiro Yamada
2548493ab4 treewide: convert devfdt_get_addr() to dev_read_addr()
When you enable CONFIG_OF_LIVE, you will end up with a lot of
conversions.

To generate this commit, I used coccinelle excluding drivers/core/,
include/dm/, and test/

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  expression dev;
  @@
  -devfdt_get_addr(dev)
  +dev_read_addr(dev)
  </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-25 14:46:57 -06:00
Masahiro Yamada
8613c8d897 treewide: convert (void *)devfdt_get_addr() to dev_read_addr_ptr()
Use the _ptr suffixed variant instead of casting. Also, convert it to
dev_read_addr_ptr(), which is safe to CONFIG_OF_LIVE.

One curious part is an error check like follows in
drivers/watchdog/omap_wdt.c:

    priv->regs = (struct wd_timer *)devfdt_get_addr(dev);
    if (!priv->regs)
            return -EINVAL;

devfdt_get_addr() returns FDT_ADDR_T_NONE (i.e. -1) on error.
So, this code does not catch any error in DT parsing.

dev_read_addr_ptr() returns NULL on error, so this error check
will work.

I generated this commit by the following command:

 $ find . -name .git -prune -o -name '*.[ch]' -type f -print | \
   xargs sed -i -e 's/([^*)]*\*)devfdt_get_addr(/dev_read_addr_ptr(/'

I manually fixed drivers/usb/host/ehci-mx6.c

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-25 14:46:57 -06:00
Tom Rini
7208396bbf Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"
This reverts commit 5d3a21df66, reversing
changes made to 56d37f1c56.

Unfortunately this is causing CI failures:
https://travis-ci.org/github/trini/u-boot/jobs/711313649

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24 08:42:06 -04:00
Masahiro Yamada
60e7fa8b3b treewide: convert devfdt_get_addr() to dev_read_addr()
When you enable CONFIG_OF_LIVE, you will end up with a lot of
conversions.

To generate this commit, I used coccinelle excluding drivers/core/,
include/dm/, and test/

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  expression dev;
  @@
  -devfdt_get_addr(dev)
  +dev_read_addr(dev)
  </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-20 11:37:47 -06:00
Masahiro Yamada
3c12c62ba5 treewide: convert (void *)devfdt_get_addr() to dev_read_addr_ptr()
Use the _ptr suffixed variant instead of casting. Also, convert it to
dev_read_addr_ptr(), which is safe to CONFIG_OF_LIVE.

One curious part is an error check like follows in
drivers/watchdog/omap_wdt.c:

    priv->regs = (struct wd_timer *)devfdt_get_addr(dev);
    if (!priv->regs)
            return -EINVAL;

devfdt_get_addr() returns FDT_ADDR_T_NONE (i.e. -1) on error.
So, this code does not catch any error in DT parsing.

dev_read_addr_ptr() returns NULL on error, so this error check
will work.

I generated this commit by the following command:

 $ find . -name .git -prune -o -name '*.[ch]' -type f -print | \
   xargs sed -i -e 's/([^*)]*\*)devfdt_get_addr(/dev_read_addr_ptr(/'

I manually fixed drivers/usb/host/ehci-mx6.c

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-20 11:37:47 -06:00
Masahiro Yamada
b75d8dc564 treewide: convert bd_t to struct bd_info by coccinelle
The Linux coding style guide (Documentation/process/coding-style.rst)
clearly says:

  It's a **mistake** to use typedef for structures and pointers.

Besides, using typedef for structures is annoying when you try to make
headers self-contained.

Let's say you have the following function declaration in a header:

  void foo(bd_t *bd);

This is not self-contained since bd_t is not defined.

To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h>

  #include <asm/u-boot.h>
  void foo(bd_t *bd);

Then, the include direcective pulls in more bloat needlessly.

If you use 'struct bd_info' instead, it is enough to put a forward
declaration as follows:

  struct bd_info;
  void foo(struct bd_info *bd);

Right, typedef'ing bd_t is a mistake.

I used coccinelle to generate this commit.

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  typedef bd_t;
  @@
  -bd_t
  +struct bd_info
  </smpl>

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-17 09:30:13 -04:00
Walter Lozano
e3e2470fdd drivers: rename drivers to match compatible string
When using OF_PLATDATA, the bind process between devices and drivers
is performed trying to match compatible string with driver names.
However driver names are not strictly defined, and also there are different
names used when declaring a driver with U_BOOT_DRIVER, the name of the
symbol used in the linker list and the used in the struct driver_info.

In order to make things a bit more clear, rename the drivers names. This
will also help for further OF_PLATDATA improvements, such as checking
for valid driver names.

Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add a fix for sandbox of-platdata to avoid using an invalid ANSI colour:
Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-09 18:57:22 -06:00
Simon Glass
6c74ee30bb minnowmax: Enable the copy framebuffer
Update the video driver to support this feature and enable it on
minnowmax to speed up the display.

With this change, the time taken to print the environment to the display
without CONFIG_CONSOLE_SCROLL_LINES is reduced from over 13 seconds to
300ms, at 1280x1024.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09 12:33:24 +08:00
Simon Glass
a67b0db24e chromebook_link: Enable the copy framebuffer
Update the video driver to support this feature and enable it on link.
Also remove the multi-line scrolling since normal scrolling is fast enough
now.

With this change, the time taken to print the environment to the display
without CONFIG_CONSOLE_SCROLL_LINES is reduced from about 930ms to 29ms.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09 12:33:24 +08:00
Simon Glass
08b7b65168 chromebook_samus: Enable the copy framebuffer
Update the video driver to support this feature and enable it on samus.
Also remove the multi-line scrolling since normal scrolling is fast enough
now.

With this change, the time taken to print the environment to the display
without CONFIG_CONSOLE_SCROLL_LINES is reduced from about 430ms to 12ms.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09 12:33:24 +08:00
Simon Glass
551ca0e647 x86: video: Support copy framebuffer with probed devices
For PCI video devices that are not mentioned in the devicetree, U-Boot
does not bind a driver before relocation, since PCI is not fully probed
at that point. Furthermore it is possible for the video device to be on
a secondary bus which is not even scanned.

This is fine if the framebuffer is allocated in fixed memory, as it
normally is on x86. But when using this as a copy framebuffer, we also
need U-Boot to allocate its own cached framebuffer for working in. Since
the video driver is never bound before relocation, the framebuffer size
is never set and U-Boot does no allocation.

Add a new CONFIG option to reserve 16MB of memory for this eventuality.
This allows vesa devices to use the copy framebuffer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09 12:33:24 +08:00
Simon Glass
7812bbdc37 video: Correctly handle multiple framebuffers
At present video_bottom is set to the bottom of each framebuffer when it
is allocated. This is not correct, since it should hold the bottom of the
entire area available for framebuffers.

Fix this by adding a private address in the uclass which keeps track of
the next available spot for a framebuffer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09 12:33:24 +08:00
Simon Glass
f578ca799e video: sandbox: Add support for the copy framebuffer
Enable this feature on sandbox by updating the SDL driver to have two
framebuffers.

Update the video tests to check that the copy framebuffer is kept in sync.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-07-09 12:33:24 +08:00
Simon Glass
2b1412c8c0 video: Update the copy framebuffer when writing bitmaps
Adjust the bitmap code to sync to the copy framebuffer when done.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09 12:33:24 +08:00
Simon Glass
c30c5f275b video: Update rotated console to support copy buffer
Update the implementation to keep a track of what it changes in the frame
buffer and then tell the copy buffer about it. Use the special
vidconsole_memmove() helper so that memmove() operations are also
reflected in the copy buffer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09 12:33:24 +08:00
Simon Glass
3ad740ac66 video: Update truetype console to support copy buffer
Update the implementation to keep a track of what it changes in the frame
buffer and then tell the copy buffer about it. Use the special
vidconsole_memmove() helper so that memmove() operations are also
reflected in the copy buffer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09 12:33:24 +08:00
Simon Glass
68f3fc767c video: Update normal console to support copy buffer
Update the implementation to keep a track of what it changes in the frame
buffer and then tell the copy buffer about it. Use the special
vidconsole_memmove() helper so that memmove() operations are also
reflected in the copy buffer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09 12:33:24 +08:00
Simon Glass
8c0b5d268d video: Add helpers for vidconsole for the copy framebuffer
Add a convenience function to call video_sync_copy() for a vidconsole.
Also add a memmove() helper, which does the memmove() as well as the sync.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09 12:33:24 +08:00