Commit graph

51 commits

Author SHA1 Message Date
Simon Glass
55171aedda dm: Emit the arch_cpu_init_dm() even only before relocation
The original function was only called once, before relocation. The new
one is called again after relocation. This was not the intent of the
original call. Fix this by renaming and updating the calling logic.

With this, chromebook_link64 makes it through SPL.

Fixes: 7fe32b3442 ("event: Convert arch_cpu_init_dm() to use events")
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-05-11 10:25:29 +08:00
Ye Li
8b956bdddd imx: imx8ulp: Adjust handshake to sync TRDC and XRDC completion
To fit the DBD_EN fused part, we re-design the TRDC and XRDC assignment.
M33 will be the TRDC owner and needs to configure TRDC. A35 is the
XRDC owner, ATF will configure XRDC.

The handshake between U-boot and M33 image is used to sync TRDC and
XRDC configuration completion. Once the handshake is done, A35 and M33
can access the allowed resources in others domain.

The handshake is needed when M33 is booted or DBD_EN fused, because both
cases will enable the TRDC. If handshake is timeout, the boot will hang.
We use SIM GPR0 to pass the info from SPL to u-boot, because before the
handshake, u-boot can't access SEC SIM and FSB.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
2023-03-29 20:15:42 +02:00
Ye Li
aec9b5de44 imx: imx8ulp: Remove the TRDC configure from A35
As M33 is responsible for TRDC configuration, the settings for A35
nonsecure world access and DMA0 access are moved to M33 image.
So remove the codes to release TRDC and configure it. Just keep
the configurations for reference.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
2023-03-29 20:15:42 +02:00
Ye Li
bf9866d265 imx: imx8ulp: Limit the eMMC ROM API workaround to A0.1 part
Since A1 ROM has fixed the ROM API eMMC issue, we should only use
the workaround for A0.1 part. Add a SOC revision check.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-03-29 20:15:42 +02:00
Ye Li
f3272355cd imx: imx8ulp: Get chip revision from Sentinel
In both SPL and u-boot, after probing the S400 MU, get the chip revision,
lifecycle and UID from Sentinel.
Update get_cpu_rev to use the chip revision not hard coded it for A0

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-03-29 20:15:41 +02:00
Ye Li
9d89dcfcb1 imx: imx8ulp: Fix MU device probe failure
Since latest DTS has added multiple MU nodes, using compatible
string to find the device node is not proper. It finds the first
node with the compatible string matched even the node is disabled.

Signed-off-by: Ye Li <ye.li@nxp.com>
2023-03-29 20:15:41 +02:00
Tom Rini
aa6e94deab global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Ye Li
03fcf96651 misc: imx: S400_API: Move S400 MU and API to a common place
Since iMX9 uses S401 which shares the API with iMX8ULP. So move S400
MU driver and API to a common place and selected by CONFIG_IMX_SENTINEL

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:00 +02:00
Peng Fan
b0a284a7c9 imx: move get_boot_device to common file
i.MX8MN/P/ULP supports ROM API, they have almost same get_boot_device
implementation, so move to a common file. And when support i.MX9,
no need to include the other function copy.

Since sys_proto.h is included in imx_romapi.c, there will be build
warning for i.MX8M because wdog_regs not defined, so include imx-regs.h
in i.MX8M sys_proro.h

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:00 +02:00
Rasmus Villemoes
5809d764a9 imx8ulp: soc.c: use rom_api_query_boot_infor() wrapper
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2022-07-25 15:35:34 +02:00
Ye Li
c41ffaa253 imx: imx8ulp_evk: Enable multiple env storage devices
Enable multiple storages for u-boot env:
MMC or SPI flash or NOWHERE for usb
so u-boot can runtime select the storage flash according to boot device.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 19:10:43 +02:00
Ji Luo
112b777849 imx: imx8ulp: reserve tee memory
The TEE memory should be reserved when TEE is present, so need
to runtime update dram bank and memory information according to
tee present or not.

Signed-off-by: Ji Luo <ji.luo@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 19:10:43 +02:00
Peng Fan
8c453e9d3d imx: imx8ulp: enable wdog_ad interrupt in CMC1
Enable wdog_ad interrupt being triggered by CMC1 to CM33 to let CM33
know A35 reset and reinitialize rpmsg.
Clear wdog_ad and AD_PERIPH reset interrupt after A35 up, otherwise
M33 will always receive interrupt.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 19:10:43 +02:00
Ye Li
c916fb1747 imx: imx8ulp: Change LPAV assignment for dual boot
Assign the LPAV owner to RTD, and assign LPAV masters and peripherals
to APD. So except the masters and peripherals, other resources
(like DDR, cgc2, pcc5) in LPAV won't be reset during reboot and suspend.

No needs to initialize DDR again after reboot.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 17:33:56 +02:00
Peng Fan
c628016c12 imx: imx8ulp: enable MU0_B clk by default
Enable MU0_B clk by default. When M33 image is loaded by Jlink,
the previous method not enable MU0_B clk and not able to communicate
with M33, so let's enable it by default.

And we not put it under kernel dts, because it conflicts with i.MX8QM
suspend/resume logic which requires large change.

Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 17:33:56 +02:00
Peng Fan
a092f33305 imx: imx8ulp: add ND/LD clock
Add a new ddr script, defconfig for ND
Configure the clock for ND mode
changing A35 to 960MHz for OD mode
Update NIC CLK for the various modes
Introduce clock_init_early/late, late is used after pmic voltage
setting, early is used in the very early stage for upower mu, lpuart and
etc.

Note: NIC runs at 324MHz, 442MHz has some random kernel hang issue with
cpuidle enabled now.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 17:33:56 +02:00
Ye Li
5579d66e37 imx: imx8ulp: Add M33 handshake functions
Add functions to check if M33 image is booted and handshake with M33
image via MU. A core notifies M33 to start init by FCR F0, then wait
M33 init done signal by checking FSR F0.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 17:33:56 +02:00
Simon Glass
7fe32b3442 event: Convert arch_cpu_init_dm() to use events
Instead of a special function, send an event after driver model is inited
and adjust the boards which use this function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-10 08:28:36 -05:00
Alice Guo
6293b73d0f imx8ulp: implement to obtain the SoC current temperature
Obatin the SoC current temperature in print_cpuinfo().

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:39 +01:00
Ye Li
484b306b9e imx8ulp: Update ethernet mac to get from fuse
Get the MAC address from fuse bank5 word 3 and 4. It has
MSB first at lowest address, so have a reverse order with other
iMX used in mac.c

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:39 +01:00
Ye Li
9c7fbebe5d imx8ulp: Workaround LPOSC_TRIM fuse load issue
8ULP ROM should read the LPOSC trim BIAS fuse to fill the CGC0
LPOSCCTRL[7:0], but it writes a fixed value on A0.1 revision.

A0.2 will fix the issue in ROM. But A0.1 we have to workaround
it in SPL by setting LPOSCCTRL BIASCURRENT again.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:39 +01:00
Ye Li
112b4cac9d imx8ulp: Remove freescale name from CPU revision
Remove the freescale vendor name from CPU revision print to align
with other i.MX platforms

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Ye Li
bd8b673003 imx8ulp: Fix DCNANO QoS setting
The setting does not have effect because we should set it after
power on the PS16 for NIC AV.

So move it after upower_init which has powered on all PS

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Ye Li
16062f9b0a imx8ulp: Set DCNANO read QoS on NIC_LPAV to highest
To avoid DCNANO underrun issue on high loading test, set its
read Qos on NIC_LPAV to highest

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Ye Li
9dde390be6 imx8ulp_evk: Control LPI2C0 PCA6416 and TPM0 for display
The board use IO9 of PCA6416 on LPI2C0 and TPM0 for MIPI DSI MUX and
backlight. However the LPI2C0 and TPM0 are M33 resources, in this
patch we simply access them, but this is a temporary solution.
We will modify it when M33 FW changes to set MIPI DSI panel as default
path and enable backlight after reset.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Ye Li
608ed200f1 imx8ulp: rdc: allow A35 access flexspi0 mem
For singel boot, set flexspi0 mem to be accessed by A35

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Peng Fan
99de168f7e imx8ulp: assign PXP/HIFI4/EPDC to APD domain
Assign the PXP/HIFI4/EPDC to APD domain, otherwise APD not
able to receive interrupts from the modules.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Ye Li
d563d29203 arm: imx8ulp: Allocate LPAV resources to AP domain
When single boot, assign AP domain as the master domain of the LPAV.
Allocates LPAV master and slave resources like GPU, DCNano, MIPI-DSI
eDMA channel and eDMA request to APD

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Ye Li
961ac78735 imx8ulp: soc: Check the DBD_EN fuse before setting RDC
S400 enables RDC only when the DBD_EN is fused. Otherwise, the RDC
is allowed by all masters.

Current S400 has issue if the XRDC has released to A35, then A35 reset
will fail in ROM due to S400 fails to get XRDC.
So temp work around is checking the DBD_EN, if it is not fused, we
don't need to call release XRDC or TRDC.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Tom Rini
b9d66a061b imx: Convert SERIAL_TAG support to ENV_VARS_UBOOT_RUNTIME_CONFIG
No iMX platforms have supported ATAG-based booting.  They have however
re-used the CONFIG_SERIAL_TAG option as a way to enable support of
reading the OTP fuses and setting the serial# environment variable in
some cases.  Change the warp7 support to use this symbol, use this for
updating the rest of the imx7 code, and update the imx8 conditionals.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-07 13:04:52 -04:00
Ye Li
e8b68048e1 imx8ulp: Add workaround for eMMC boot
When booting from boot part1/2, the image offset should be 0, but
ROM has a bug to return 0x8000. Has to workaround the issue before
ROM fix it.

Use a ROM function to know boot from emmc boot part or user part
So we can set the image offset accordingly.

Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
27b6a4504e imx8ulp: Use DGO_GP5 to get boot config
Since CMC1 MR0 only reflects high 16 bits boot cfg used for AP domian,
it does not connect to low 16 bits for RTD. So we can't get the correct
boot mode.
Change to use DGO_GP5 of SEC_SIM which is set by ROM.

Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
8a58897e0e imx8ulp: soc: correct reset cause
The CMC1 SRS reflects the current reset cause, not SSRS.

Then you could get "Reset cause: WARM-WDG" when issue reset in U-Boot.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
525a28c47f arm: imx8ulp: add dummy imx_get_mac_from_fuse
Add imx_get_mac_from_fuse for enet build pass

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
16243a1735 arm: imx8ulp: Allocate DCNANO and MIPI_DSI to AD domain
Configure DCNANO and MIPI_DSI to be controlled by AD for single boot

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
619412ab54 arm: iMX8ULP: Add boot device relevant functions
Read from ROM API to get current boot device.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
a7990a88b9 arm: imx8ulp: Probe the S400 MU device in arch init
Need probe the S400 MU device in arch_cpu_init_dm, so we can use
S400 API in u-boot

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
3912d4b273 imx8ulp: unify rdc functions
Unify rdc function to rdc.c
Update soc.c to use new rdc function

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
a443ec2355 arm: imx8ulp: release trdc and assign lpav from RTD to APD
Rlease LPAV from RTD to APD
Release gpu2D/3D to APD
Set TRDC MBC2 MEM1 for iomuxc0 access
Since upower depends AP/M33 SW to configure IOMUX for its PMIC i2c
and MODE pins. we have to open iomuxc0 access for A35 core (domain 7)
in single boot.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
3df564993e arm: imx8ulp: add trdc release request
Add TRDC release request, then we could configure resources to be
accessible by A35 Domain.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
ba472a209b arm: imx8ulp: release and configure XRDC at early phase
Since S400 will set the memory of SPL image to R/X. We can't write
to any data in SPL image.

1. Set the parameters save/restore only for u-boot, not for SPL. to
   avoid write data.
2. Not use MU DM driver but directly call MU API to send release XRDC
   to S400 at early phase.
3. Configure the SPL image memory of SRAM2 to writable (R/W/X)

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
aadd6ca158 arm: imx8ulp: Update the reset vector in u-boot
Because we have set reset vector to ATF in SPL, have to set it back
to ROM for any reset in u-boot

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
3a01f723ab arm: imx8ulp: disable wdog3
Disable wdog3 which is configured by ROM

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
610083e547 arm: imx8ulp: Enable full L2 cache in SPL
SRAM2 is half L2 cache and default to SRAM after system boot.
To enable the full l2 cache (512KB), it needs to reset A35 to make
the change happen.

So re-implement the jump entry function in SPL:
1. configure the core0 reset vector to entry (ATF)
2. enable the L2 full cache
3. reset A35
So when core0 up, it runs into ATF. And we have 512KB L2 cache working.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
981f040a9a arm: imx8ulp: soc: Change to use CMC1 to get bootcfg
CMC1 also has a MR register for bootcfg

Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09 14:46:51 +02:00
Peng Fan
a84dab4f70 arm: imx8ulp: add clock support
Add i.MX8ULP clock support

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:51 +02:00
Ye Li
6f3858d732 arm: imx8ulp: add container support
i.MX8ULP support using ROM API to load container image,
it use same ROM API as i.MX8MN/MP, and use same container format
as i.MX8QM/QXP.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:50 +02:00
Peng Fan
9ef89ea9b0 arm: imx: basic i.MX8ULP support
Add basic i.MX8ULP support

For the MMU part, Using a simple way the calculate the MMU size to avoid
default heavy calcaulation. And align address and size in the table
settings to 2MB or 4GB as much as possible. So we can reduce the 4K page
allocations in MMU table which will spends much time in create the
page table

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:50 +02:00
Peng Fan
c17f5935cf imx: imx8ulp: add get reset cause
Add get reset cause function to show what triggerred reset.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:50 +02:00
Peng Fan
77c3b9cc98 arm: imx8ulp: support print cpu info
Support print cpu info. the clock function has not been added, it will
be added in following patches.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09 14:46:50 +02:00