mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 14:14:32 +00:00
ba472a209b
Since S400 will set the memory of SPL image to R/X. We can't write to any data in SPL image. 1. Set the parameters save/restore only for u-boot, not for SPL. to avoid write data. 2. Not use MU DM driver but directly call MU API to send release XRDC to S400 at early phase. 3. Configure the SPL image memory of SRAM2 to writable (R/W/X) Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
455 lines
10 KiB
C
455 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2021 NXP
|
|
*/
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/armv8/mmu.h>
|
|
#include <asm/mach-imx/boot_mode.h>
|
|
#include <efi_loader.h>
|
|
#include <spl.h>
|
|
#include <asm/arch/s400_api.h>
|
|
#include <asm/arch/mu_hal.h>
|
|
#include <cpu_func.h>
|
|
#include <asm/setup.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct rom_api *g_rom_api = (struct rom_api *)0x1980;
|
|
|
|
u32 get_cpu_rev(void)
|
|
{
|
|
return (MXC_CPU_IMX8ULP << 12) | CHIP_REV_1_0;
|
|
}
|
|
|
|
enum bt_mode get_boot_mode(void)
|
|
{
|
|
u32 bt0_cfg = 0;
|
|
|
|
bt0_cfg = readl(CMC1_BASE_ADDR + 0xa0);
|
|
bt0_cfg &= (BT0CFG_LPBOOT_MASK | BT0CFG_DUALBOOT_MASK);
|
|
|
|
if (!(bt0_cfg & BT0CFG_LPBOOT_MASK)) {
|
|
/* No low power boot */
|
|
if (bt0_cfg & BT0CFG_DUALBOOT_MASK)
|
|
return DUAL_BOOT;
|
|
else
|
|
return SINGLE_BOOT;
|
|
}
|
|
|
|
return LOW_POWER_BOOT;
|
|
}
|
|
|
|
#define CMC_SRS_TAMPER BIT(31)
|
|
#define CMC_SRS_SECURITY BIT(30)
|
|
#define CMC_SRS_TZWDG BIT(29)
|
|
#define CMC_SRS_JTAG_RST BIT(28)
|
|
#define CMC_SRS_CORE1 BIT(16)
|
|
#define CMC_SRS_LOCKUP BIT(15)
|
|
#define CMC_SRS_SW BIT(14)
|
|
#define CMC_SRS_WDG BIT(13)
|
|
#define CMC_SRS_PIN_RESET BIT(8)
|
|
#define CMC_SRS_WARM BIT(4)
|
|
#define CMC_SRS_HVD BIT(3)
|
|
#define CMC_SRS_LVD BIT(2)
|
|
#define CMC_SRS_POR BIT(1)
|
|
#define CMC_SRS_WUP BIT(0)
|
|
|
|
static u32 reset_cause = -1;
|
|
|
|
static char *get_reset_cause(char *ret)
|
|
{
|
|
u32 cause1, cause = 0, srs = 0;
|
|
void __iomem *reg_ssrs = (void __iomem *)(CMC1_BASE_ADDR + 0x88);
|
|
void __iomem *reg_srs = (void __iomem *)(CMC1_BASE_ADDR + 0x80);
|
|
|
|
if (!ret)
|
|
return "null";
|
|
|
|
srs = readl(reg_srs);
|
|
cause1 = readl(reg_ssrs);
|
|
|
|
reset_cause = cause1;
|
|
|
|
cause = cause1 & (CMC_SRS_POR | CMC_SRS_WUP | CMC_SRS_WARM);
|
|
|
|
switch (cause) {
|
|
case CMC_SRS_POR:
|
|
sprintf(ret, "%s", "POR");
|
|
break;
|
|
case CMC_SRS_WUP:
|
|
sprintf(ret, "%s", "WUP");
|
|
break;
|
|
case CMC_SRS_WARM:
|
|
cause = cause1 & (CMC_SRS_WDG | CMC_SRS_SW |
|
|
CMC_SRS_JTAG_RST);
|
|
switch (cause) {
|
|
case CMC_SRS_WDG:
|
|
sprintf(ret, "%s", "WARM-WDG");
|
|
break;
|
|
case CMC_SRS_SW:
|
|
sprintf(ret, "%s", "WARM-SW");
|
|
break;
|
|
case CMC_SRS_JTAG_RST:
|
|
sprintf(ret, "%s", "WARM-JTAG");
|
|
break;
|
|
default:
|
|
sprintf(ret, "%s", "WARM-UNKN");
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
sprintf(ret, "%s-%X", "UNKN", cause1);
|
|
break;
|
|
}
|
|
|
|
debug("[%X] SRS[%X] %X - ", cause1, srs, srs ^ cause1);
|
|
return ret;
|
|
}
|
|
|
|
#if defined(CONFIG_DISPLAY_CPUINFO)
|
|
const char *get_imx_type(u32 imxtype)
|
|
{
|
|
return "8ULP";
|
|
}
|
|
|
|
int print_cpuinfo(void)
|
|
{
|
|
u32 cpurev;
|
|
char cause[18];
|
|
|
|
cpurev = get_cpu_rev();
|
|
|
|
printf("CPU: Freescale i.MX%s rev%d.%d at %d MHz\n",
|
|
get_imx_type((cpurev & 0xFF000) >> 12),
|
|
(cpurev & 0x000F0) >> 4, (cpurev & 0x0000F) >> 0,
|
|
mxc_get_clock(MXC_ARM_CLK) / 1000000);
|
|
|
|
printf("Reset cause: %s\n", get_reset_cause(cause));
|
|
|
|
printf("Boot mode: ");
|
|
switch (get_boot_mode()) {
|
|
case LOW_POWER_BOOT:
|
|
printf("Low power boot\n");
|
|
break;
|
|
case DUAL_BOOT:
|
|
printf("Dual boot\n");
|
|
break;
|
|
case SINGLE_BOOT:
|
|
default:
|
|
printf("Single boot\n");
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#define UNLOCK_WORD0 0xC520 /* 1st unlock word */
|
|
#define UNLOCK_WORD1 0xD928 /* 2nd unlock word */
|
|
#define REFRESH_WORD0 0xA602 /* 1st refresh word */
|
|
#define REFRESH_WORD1 0xB480 /* 2nd refresh word */
|
|
|
|
static void disable_wdog(void __iomem *wdog_base)
|
|
{
|
|
u32 val_cs = readl(wdog_base + 0x00);
|
|
|
|
if (!(val_cs & 0x80))
|
|
return;
|
|
|
|
dmb();
|
|
__raw_writel(REFRESH_WORD0, (wdog_base + 0x04)); /* Refresh the CNT */
|
|
__raw_writel(REFRESH_WORD1, (wdog_base + 0x04));
|
|
dmb();
|
|
|
|
if (!(val_cs & 800)) {
|
|
dmb();
|
|
__raw_writel(UNLOCK_WORD0, (wdog_base + 0x04));
|
|
__raw_writel(UNLOCK_WORD1, (wdog_base + 0x04));
|
|
dmb();
|
|
|
|
while (!(readl(wdog_base + 0x00) & 0x800))
|
|
;
|
|
}
|
|
writel(0x0, (wdog_base + 0x0C)); /* Set WIN to 0 */
|
|
writel(0x400, (wdog_base + 0x08)); /* Set timeout to default 0x400 */
|
|
writel(0x120, (wdog_base + 0x00)); /* Disable it and set update */
|
|
|
|
while (!(readl(wdog_base + 0x00) & 0x400))
|
|
;
|
|
}
|
|
|
|
void init_wdog(void)
|
|
{
|
|
disable_wdog((void __iomem *)WDG3_RBASE);
|
|
}
|
|
|
|
static struct mm_region imx8ulp_arm64_mem_map[] = {
|
|
{
|
|
/* ROM */
|
|
.virt = 0x0,
|
|
.phys = 0x0,
|
|
.size = 0x40000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
PTE_BLOCK_OUTER_SHARE
|
|
},
|
|
{
|
|
/* FLEXSPI0 */
|
|
.virt = 0x04000000,
|
|
.phys = 0x04000000,
|
|
.size = 0x08000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE |
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
|
},
|
|
{
|
|
/* SSRAM (align with 2M) */
|
|
.virt = 0x1FE00000UL,
|
|
.phys = 0x1FE00000UL,
|
|
.size = 0x400000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
PTE_BLOCK_OUTER_SHARE |
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
|
}, {
|
|
/* SRAM1 (align with 2M) */
|
|
.virt = 0x21000000UL,
|
|
.phys = 0x21000000UL,
|
|
.size = 0x200000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
PTE_BLOCK_OUTER_SHARE |
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
|
}, {
|
|
/* SRAM0 (align with 2M) */
|
|
.virt = 0x22000000UL,
|
|
.phys = 0x22000000UL,
|
|
.size = 0x200000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
PTE_BLOCK_OUTER_SHARE |
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
|
}, {
|
|
/* Peripherals */
|
|
.virt = 0x27000000UL,
|
|
.phys = 0x27000000UL,
|
|
.size = 0x3000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE |
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
|
}, {
|
|
/* Peripherals */
|
|
.virt = 0x2D000000UL,
|
|
.phys = 0x2D000000UL,
|
|
.size = 0x1600000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE |
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
|
}, {
|
|
/* FLEXSPI1-2 */
|
|
.virt = 0x40000000UL,
|
|
.phys = 0x40000000UL,
|
|
.size = 0x40000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE |
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
|
}, {
|
|
/* DRAM1 */
|
|
.virt = 0x80000000UL,
|
|
.phys = 0x80000000UL,
|
|
.size = PHYS_SDRAM_SIZE,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
PTE_BLOCK_OUTER_SHARE
|
|
}, {
|
|
/*
|
|
* empty entrie to split table entry 5
|
|
* if needed when TEEs are used
|
|
*/
|
|
0,
|
|
}, {
|
|
/* List terminator */
|
|
0,
|
|
}
|
|
};
|
|
|
|
struct mm_region *mem_map = imx8ulp_arm64_mem_map;
|
|
|
|
/* simplify the page table size to enhance boot speed */
|
|
#define MAX_PTE_ENTRIES 512
|
|
#define MAX_MEM_MAP_REGIONS 16
|
|
u64 get_page_table_size(void)
|
|
{
|
|
u64 one_pt = MAX_PTE_ENTRIES * sizeof(u64);
|
|
u64 size = 0;
|
|
|
|
/*
|
|
* For each memory region, the max table size:
|
|
* 2 level 3 tables + 2 level 2 tables + 1 level 1 table
|
|
*/
|
|
size = (2 + 2 + 1) * one_pt * MAX_MEM_MAP_REGIONS + one_pt;
|
|
|
|
/*
|
|
* We need to duplicate our page table once to have an emergency pt to
|
|
* resort to when splitting page tables later on
|
|
*/
|
|
size *= 2;
|
|
|
|
/*
|
|
* We may need to split page tables later on if dcache settings change,
|
|
* so reserve up to 4 (random pick) page tables for that.
|
|
*/
|
|
size += one_pt * 4;
|
|
|
|
return size;
|
|
}
|
|
|
|
void enable_caches(void)
|
|
{
|
|
/* TODO: add TEE memmap region */
|
|
|
|
icache_enable();
|
|
dcache_enable();
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = PHYS_SDRAM_SIZE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SERIAL_TAG
|
|
void get_board_serial(struct tag_serialnr *serialnr)
|
|
{
|
|
/* TODO */
|
|
}
|
|
#endif
|
|
|
|
static void set_core0_reset_vector(u32 entry)
|
|
{
|
|
/* Update SIM1 DGO8 for reset vector base */
|
|
writel(entry, SIM1_BASE_ADDR + 0x5c);
|
|
|
|
/* set update bit */
|
|
setbits_le32(SIM1_BASE_ADDR + 0x8, 0x1 << 24);
|
|
|
|
/* polling the ack */
|
|
while ((readl(SIM1_BASE_ADDR + 0x8) & (0x1 << 26)) == 0)
|
|
;
|
|
|
|
/* clear the update */
|
|
clrbits_le32(SIM1_BASE_ADDR + 0x8, (0x1 << 24));
|
|
|
|
/* clear the ack by set 1 */
|
|
setbits_le32(SIM1_BASE_ADDR + 0x8, (0x1 << 26));
|
|
}
|
|
|
|
static int release_xrdc(void)
|
|
{
|
|
ulong s_mu_base = 0x27020000UL;
|
|
struct imx8ulp_s400_msg msg;
|
|
int ret;
|
|
|
|
msg.version = AHAB_VERSION;
|
|
msg.tag = AHAB_CMD_TAG;
|
|
msg.size = 2;
|
|
msg.command = AHAB_RELEASE_RDC_REQ_CID;
|
|
msg.data[0] = (0x78 << 8) | 0x2; /* A35 XRDC */
|
|
|
|
mu_hal_init(s_mu_base);
|
|
mu_hal_sendmsg(s_mu_base, 0, *((u32 *)&msg));
|
|
mu_hal_sendmsg(s_mu_base, 1, msg.data[0]);
|
|
|
|
ret = mu_hal_receivemsg(s_mu_base, 0, (u32 *)&msg);
|
|
if (!ret) {
|
|
ret = mu_hal_receivemsg(s_mu_base, 1, &msg.data[0]);
|
|
if (!ret)
|
|
return ret;
|
|
|
|
if ((msg.data[0] & 0xff) == 0)
|
|
return 0;
|
|
else
|
|
return -EIO;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void xrdc_mrc_region_set_access(int mrc_index, u32 addr, u32 access)
|
|
{
|
|
ulong xrdc_base = 0x292f0000, off;
|
|
u32 mrgd[5];
|
|
u8 mrcfg, j, region_num;
|
|
u8 dsel;
|
|
|
|
mrcfg = readb(xrdc_base + 0x140 + mrc_index);
|
|
region_num = mrcfg & 0x1f;
|
|
|
|
for (j = 0; j < region_num; j++) {
|
|
off = 0x2000 + mrc_index * 0x200 + j * 0x20;
|
|
|
|
mrgd[0] = readl(xrdc_base + off);
|
|
mrgd[1] = readl(xrdc_base + off + 4);
|
|
mrgd[2] = readl(xrdc_base + off + 8);
|
|
mrgd[3] = readl(xrdc_base + off + 0xc);
|
|
mrgd[4] = readl(xrdc_base + off + 0x10);
|
|
|
|
debug("MRC [%u][%u]\n", mrc_index, j);
|
|
debug("0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
|
|
mrgd[0], mrgd[1], mrgd[2], mrgd[3], mrgd[4]);
|
|
|
|
/* hit */
|
|
if (addr >= mrgd[0] && addr <= mrgd[1]) {
|
|
/* find domain 7 DSEL */
|
|
dsel = (mrgd[2] >> 21) & 0x7;
|
|
if (dsel == 1) {
|
|
mrgd[4] &= ~0xFFF;
|
|
mrgd[4] |= (access & 0xFFF);
|
|
} else if (dsel == 2) {
|
|
mrgd[4] &= ~0xFFF0000;
|
|
mrgd[4] |= ((access & 0xFFF) << 16);
|
|
}
|
|
|
|
/* not handle other cases, since S400 only set ACCESS1 and 2 */
|
|
writel(mrgd[4], xrdc_base + off + 0x10);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
int arch_cpu_init(void)
|
|
{
|
|
if (IS_ENABLED(CONFIG_SPL_BUILD)) {
|
|
/* Disable wdog */
|
|
init_wdog();
|
|
|
|
/* release xrdc, then allow A35 to write SRAM2 */
|
|
release_xrdc();
|
|
xrdc_mrc_region_set_access(2, CONFIG_SPL_TEXT_BASE, 0xE00);
|
|
|
|
clock_init();
|
|
} else {
|
|
/* reconfigure core0 reset vector to ROM */
|
|
set_core0_reset_vector(0x1000);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
|
|
{
|
|
debug("image entry point: 0x%lx\n", spl_image->entry_point);
|
|
|
|
set_core0_reset_vector((u32)spl_image->entry_point);
|
|
|
|
/* Enable the 512KB cache */
|
|
setbits_le32(SIM1_BASE_ADDR + 0x30, (0x1 << 4));
|
|
|
|
/* reset core */
|
|
setbits_le32(SIM1_BASE_ADDR + 0x30, (0x1 << 16));
|
|
|
|
while (1)
|
|
;
|
|
}
|
|
#endif
|