Commit graph

721 commits

Author SHA1 Message Date
Weijie Gao
76880b08c4 mips: mtmips: add two reference boards for mt7620
The mt7620_rfb board supports integrated 10/100M PHYs plus two external
giga PHYs. It also has 8MB SPI-NOR, mini PCI-e x1 slot, SDHC and USB.

The mt7620_mt7530_rfb boards supports an external MT7530 giga switch and a
16MB SPI-NOR flash.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24 21:39:26 +01:00
Weijie Gao
dd4fdc0b14 mips: mtmips: add support for MediaTek MT7620 SoC
This patch adds support for MediaTek MT7620 SoC.
All files are dedicated for u-boot.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24 21:39:26 +01:00
Weijie Gao
f0a865bd55 mips: mtmips: add support to initialize SDRAM
This patch adds support for mtmips SoCs to initialize the SDRAM.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24 21:39:26 +01:00
Weijie Gao
50d34f0eaa mips: enable _machine_restart for spl
The sysreset driver has a config CONFIG_SPL_SYSRESET for the spl stage.
Change CONFIG_SYSRESET to CONFIG_IS_ENABLED(SYSRESET) will give spl a
chance to use _machine_restart instead of the sysreset driver.

Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24 21:39:26 +01:00
Weijie Gao
9bf72ba6f6 mips: mtmips: fix dram size detection in dram_init
CONFIG_SYS_SDRAM_BASE points to cached memory, i.e. KSEG0, which is not
suitable for detecting memory size.

Replace CONFIG_SYS_SDRAM_BASE with KSEG1, and make dram_init() always do
memory size detection in any stage.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24 21:39:26 +01:00
Weijie Gao
7fcc740ffe mips: mtmips: select SYSRESET for mt7628 only
Currently only mt7628 needs the sysreset driver, do not select it for
mt7620.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24 21:39:26 +01:00
Weijie Gao
451abbbedd mips: mtmips: move mt7628 related Kconfig into mt7628 subdirectory
This patch is a preparation for add a new soc fot mtmips.

Move all mt7628 related Kconfig (boards and UART selection) into mt7628
subdirectory and make sure the top directory of mtmips contains only
selection for SoCs.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24 21:39:26 +01:00
Weijie Gao
da41a56059 mips: dts: switch to board defines for dtb for mtmips
Previous the dts files for gardena-smart-gateway-mt7688 and
linkit-smart-7688 are set to be built when mtmips is selected.

This can lead to a compilation error if another soc is added to this arch
with different dtsi files.

So it's better to build the dtb only if their board is selected.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24 21:39:26 +01:00
Ovidiu Panait
130845bac1 common: board_r: Drop arch-specific ifdefs around initr_trap
In order to remove the arch-specific ifdefs around initr_trap, introduce
arch_initr_trap weak initcall. Implementations for ppc/m68k/mips have
been moved to arch/<arch>/lib/traps.c

Default implementation is a nop stub.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-01-15 14:36:12 -05:00
Tom Rini
b11f634b1c Driver model: make some udevice fields private
Driver model: Rename U_BOOT_DEVICE et al.
 dtoc: Tidy up and add more tests
 ns16550 code clean-up
 x86 and sandbox minor fixes for of-platdata
 dtoc prepration for adding build-time instantiation
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl/09LURHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrebjwwf/fHRjYsAY/Yj/+y1xgo3L3sphIvQUqTDF
 KkLl+kHdV5r8W/HJULxLQcF2r7pcPEI6TAQxuj3qQ5SUvm2HviS8GHGPawDEwyht
 HgBp9VD56+HUadMfnbG//DVS73ycbL4XSKlYqpkINEejtnlttsCIawUXX5cTyGM/
 59VkgnKrKvJQRUXvYLa8MTugTs4fkPJGDqhActBk/7SP1SImj+rfalNSqA2/dx6y
 2RnPCSzB1x2231KSj+B1NgGlR3Xb8P8zgh20ijcEU/hrlXBTZyi7K7f4SJR30Efu
 LYkkuj4VbxcV/25RozR0fmknqCs0QyAI+/dql6TNtbTSPC/jAfj0jQ==
 =9kN3
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into next

Driver model: make some udevice fields private
Driver model: Rename U_BOOT_DEVICE et al.
dtoc: Tidy up and add more tests
ns16550 code clean-up
x86 and sandbox minor fixes for of-platdata
dtoc prepration for adding build-time instantiation
2021-01-05 22:34:43 -05:00
Simon Glass
65e25bea59 dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()
In the spirit of using the same base name for all of these related macros,
rename this to have the operation at the end. This is not widely used so
the impact is fairly small.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:26:35 -07:00
Sean Anderson
237e5880f8 spi: dw: Add SoC-specific compatible strings
This adds SoC-specific compatible strings to all users of the designware
spi device. This will allow for the correct driver to be selected for each
device. Where it is publicly documented, a compatible string for the
specific device version has also been added. Devices without
publicly-documented device versions include MSCC SoCs, and Arc Socs. All
compatible strings except those for SoCFPGAs and some of the versioned
strings have been taken from Linux.

Since SSI_MAX_XFER_SIZE is determined at runtime, this is not strictly
necessary. However, it is a good cleanup and brings things closer to Linux.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Tested-by Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:16:37 +05:30
Stefan Roese
540a2bcec1 mips: octeon: tools: Add update_octeon_header tool
Add a tool to update or insert an Octeon specific header into the U-Boot
image. This is needed e.g. for booting via SPI NOR, eMMC and NAND.

While working on this, move enum cvmx_board_types_enum and
cvmx_board_type_to_string() to cvmx-bootloader.h and remove the
unreferenced (unsupported) board definition.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-11-30 18:32:09 +01:00
Stefan Roese
b7eac19a3d mips: octeon: bootoctlinux: Use gd->ram_size instead of ram_get_info()
Using ram_get_info() is complicated and does not work after relocation.
Now that gd->ram_size holds the full RAM size, let's use it instead and
remove the ram_get_size logic completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-11-30 18:31:56 +01:00
Stefan Roese
8bab2c893c mips: octeon: Report full DDR size in dram_init() to gd->ram_size
With this patch, gd->ram_size now holds to full RAM size detected by the
DDR init code. It introduces the get_effective_memsize() function to
report the maximum usable RAM size in U-Boot to the system instead.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-11-30 18:31:56 +01:00
Stefan Roese
de24bc7e0e mips: start.S: Add Octeon boot header compatibility
Octeon has a specific boot header, when booted via SPI NOR, NAND or MMC.
Here the only 2 instructions are allowed in the first few bytes of the
image. And these instructions need to be one branch and a nop. This
patch adds the necessary nop after the nop, to that the common MIPS
image is compatible with this Octeon header.

The tool to patch the Octeon boot header into the image will be send in
a follow-up patch.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-11-30 18:31:56 +01:00
Aaron Williams
e602dd5238 mips: octeon: Add bootoctlinux command
Octeon needs a platform specific cmd to boot the Linux kernel, as
specific parameters need to be passed and special handling for the
multiple cores (SMP) is needed.

Co-developed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
[use gd->ram_base instead of gd->bd->bi_memstart]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-10-07 20:25:58 +02:00
Aaron Williams
4b43e7e210 mips: octeon: Add bootmem support
This is needed for Linux booting, as the memory infos need to be passed
in this bootmem format to the Linux kernel.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:58 +02:00
Aaron Williams
b0ce80588d mips: octeon: Add coremask support
This patch adds the coremask handling functions.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:58 +02:00
Aaron Williams
afb4828ede mips: octeon: Add header cvmx-bootinfo.h
Add header to handle bootinfo support, needed for Octeon Linux kernel
booting.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:58 +02:00
Aaron Williams
99b937e568 mips: octeon: Add header cvmx-fuse.h
Add header to handle Octeon fuse access.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:58 +02:00
Aaron Williams
5d7282195a mips: octeon: Add header octeon-feature.h
This header includes the Octeon feature detection used in many Octeon
drivers.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:58 +02:00
Aaron Williams
b1fed50a43 mips: octeon: Add header cvmx-regs.h
This header includes common register defines and accessor functions.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:57 +02:00
Stefan Roese
7c6f274a36 mips: octeon: lowlevel_init.S: Add NMI handling code for SMP Linux booting
This patch adds the necessary lowlevel init code, to enable SMP Linux
booting. This code will be used with the platform specific Octeon Linux
boot command "bootoctlinux", which starts a configurable number of cores
into Linux.

Additionally some erratas and lowlevel register initializations are
copied from the original Cavium / Marvell U-Boot source code, enabling
booting into the Linux kernel.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:57 +02:00
Stefan Roese
97e795ccca mips: octeon: octeon-model.h: Enable inclusion from assembler files
Add the #ifdef __ASSEMBLY__ checks to enable inclusion of this header
from assembler files.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:57 +02:00
Stefan Roese
d25d2db847 mips: octeon: Add USB DT nodes
Add the USB device tree nodes to the Octeon dts/dtsi files.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-07 20:25:57 +02:00
Stefan Roese
399b867fac mips: octeon: cache.c: Flush all pending writes in flush_dcache_range()
As noticed while working on the USB xHCI support, Octeon needs to flush
all pending writes so that the values are present in the memory. Add
this "syncw" instruction (twice) to flush_dcache_range().

Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:57 +02:00
Stefan Roese
b28d35234c mips: octeon: Add mangle-port.h
Import platform specific mangle-port.h header, allowing a area specific
swapping, which is needed on Octeon for USB & PCI areas.

Imported from Linux v5.7.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:57 +02:00
Stefan Roese
fd569c878b mips: octeon: cpu.c: Add table for selective swapping
Import octeon_should_swizzle_table[] which is needed for the area
specific swapping. It will be used by the platform specific
mangle-port.h header.

Imported from Linux v5.7.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:57 +02:00
Stefan Roese
590d48e9d1 mips: octeon: dram.c: Add RAM driver support
This patch adds the initialization call for the Octeon RAM driver to
the Octeon platforms code. So if enabled via Kconfig, the DDR driver
will be called and the RAM will be configured and used. If the RAM
driver is not enabled, the L2 cache is still used as RAM.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:57 +02:00
Aaron Williams
073e8ee5df mips: octeon: Add octeon_ddr.h header
This header will be used by the DDR driver (lmc). Its ported from the
2013 Cavium / Marvell U-Boot repository.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:57 +02:00
Aaron Williams
91e34fcb41 mips: octeon Add cvmx/cvmx-lmcx-defs.h header
This header will be used by the DDR driver (lmc). Its ported from the
2013 Cavium / Marvell U-Boot repository.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:57 +02:00
Aaron Williams
75168b4aa7 mips: octeon: Add octeon-model.h header
This header is used by the upcoming DDR driver and potentially by other
drivers ported from the 2013 Cavium / Marvell U-Boot repository.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:57 +02:00
Stefan Roese
a23c279059 mips: octeon: dts: mrvl, cn73xx.dtsi: Add memory controller DT node
This patch adds the memory controller (LMC) DT node to the Octeon 3 dtsi
file. It also adds the L2C DT node, as this is referenced by the DDR
driver.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-07 20:25:56 +02:00
Tom Rini
b7e7831e5d Merge branch 'next'
Bring in the assorted changes that have been staged in the 'next' branch
prior to release.

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-05 14:10:59 -04:00
Mauro Condarelli
7d1538cc9b mips: vocore2: fix various issues
- fix SPL image generation
- fix incorrect console output
- increase malloc_f and malloc_r space to fix LZMA decompression errors
- increase SPI flash clock

Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
[squashed to one patch, fix commit subject and description]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-09-23 00:14:56 +02:00
John Robertson
bd25f9a69f mips: dts: Fix PIC32MZDA GPIO register definitions
The GPIO bank name for banks J and K are not correct when using the
'gpio' command from the console.

The driver derives the bank name from the device tree instance string by
using the instance value and adding 'A': gpio0@xxaddrxx is Bank A,
gpio1@yyaddryy is Bank B and so on.

On the PIC32, there is no Bank I so instances 8 and 9 need to be
incremented as a minimum change.

An alternative (less opaque) implementation would be to use a bank-name
property instead but this would require modifying the driver code too.

Signed-off-by: John Robertson <john.robertson@simiatec.com>
2020-09-23 00:14:29 +02:00
John Robertson
81b543a4e6 mips: dts: Fix PIC32MZDA GPIO register definitions
GPIO state cannot be changed via the device tree (e.g. with gpio-hog) or
using the 'gpio' command from the console.

The root cause is a discrepancy between the driver and the device tree:
the driver code expects an absolute I/O address in the <reg> property,
while the device tree defines the address relative to a declaration in
the parent pinctrl node.

Changing the device tree to fix a driver issue would normally be wrong,
however:
- I have run the first version of U-Boot in which this driver appears
  (v2016.03) and the same problem exists, so this is not a regression;
- There is no code that references a parent device tree node that might
  suggest the intent of the author was to parse the DT as it exists now;
- The equivalent Linux PIC32 GPIO driver also uses absolute addresses
  for the GPIO <reg> property. This change brings the U-Boot DT more
  into line with Linux.

Additionally, the data sheet (Microchip ref. 60001361H) shows that the
register set to control a GPIO bank spans 0xE0 bytes, but the device
tree specified size is only 0x48 bytes.

Signed-off-by: John Robertson <john.robertson@simiatec.com>
2020-09-23 00:14:28 +02:00
John Robertson
0723c2ddeb mips: dts: Fix device tree warnings for PIC32MZDA
Signed-off-by: John Robertson <john.robertson@simiatec.com>
2020-09-23 00:14:28 +02:00
John Robertson
69af033fb9 mips: pic32mzdask: disable SDHCI SDCD signal workaround
The PIC32MZ DA Starter Kit does not need the card detect workaround
because the SDCD signal line is connected properly. Disable the
workaround in this case.

Signed-off-by: John Robertson <john.robertson@simiatec.com>
2020-09-23 00:14:14 +02:00
Stefan Roese
e207f2256f global: Move from bi_memstart/memsize -> gd->ram_base/ram_size
With the planned removal of bi_memstart & bi_memsize, this patch now
moves the references to the better suiting gd->ram_base/ram_size
variables.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-26 09:19:34 +02:00
Tom Rini
bb3694d5b1 - doc: fix qemu-mips build instructions
- MIPS: add GPIO, CLK and SPI drivers for Octeon MIPS64
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAl8oYscACgkQKPlOlyTy
 XBhMSxAAtCdGKSU1cBLvLhoHi9zHfJ9fXKwrSTikSWJ5SotinY8ICdR95PDDChnv
 BL5FH1TYMi6cwLxoT7XuOzSjUvYFx+y7drT5Cj78Udzfw3J0OF2mVhJTLkV0adnK
 beT6srAgM/Sli19ewXquWqzE/s9fSwjjNfZH43ySxDb3S35llYcBaoOIZ+o1EUO5
 So8Vvi31W5H6MpxioTGGH9CJLHU7Xa6hCeLg/h6P1AUAyyQICFMraFfG6nt90k5k
 2z0Lc7D5I5JQi074nAChSo/D91p75Z5pLYx+h3MFWjwafr5QddqjZ/hL+gixubWg
 yW0QX4TA92X1p/wXioYleTldLbbhz23OvjYJyfvmEsNIvTuAj/opi+Im5Lg0T0TT
 QJPNenxKwnURfYwI2woSk6xFBZqMgZ5eo1FacTUebRCkkW/YTKpcOn7K2pNzQfJn
 c/rKo9/rJVyb+1X/EglUEJ07ARUWRTq8dgOYbGe25qqTjYlwES4xd4AQrqQaYpkF
 OGzMGezzw5HejtqMa1x01VsPQZgcKTTS3gmnLYkfs8j7WD0+f5V2Ba9gnrblSXeR
 Vwfc8yWU0fIYW7I4kX9hsugqEqUOlXeUJ1yylNdeenBn6Hvs4Ros5GgNco1n8lhi
 lcEy/DzAcVw5cAZafeR0ZIMj2r3hTs4jW+TUFKEuuNW9W+KV2ZI=
 =Kv/C
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2020-08-03' of https://gitlab.denx.de/u-boot/custodians/u-boot-mips

- doc: fix qemu-mips build instructions
- MIPS: add GPIO, CLK and SPI drivers for Octeon MIPS64
2020-08-04 11:07:16 -04:00
Simon Glass
dcd7c906d0 mscc: Drop dm.h header file
This header file should not be included in other header files. Remove it
from each one and use a forward declaration instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03 22:19:54 -04:00
Stefan Roese
1015540d70 mips: octeon: Update Octeon Kconfig
This patch selects DM_SPI & DM_I2C for MIPS Octeon. DM_GPIO, DM_SERIAL
and DM_ETH are already selected.

Additionally the selections are now alphabetically sorted.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-03 21:14:48 +02:00
Stefan Roese
9044ed2c68 mips: octeon: mrvl, octeon-ebb7304.dts: Add SPI flash DT node
Add the SPI flash DT node for the EBB7304.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-03 21:14:48 +02:00
Stefan Roese
1032491904 mips: octeon: mrvl,cn73xx.dtsi: Add SPI DT node
Add the Octeon SPI DT node to the dtsi file.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-03 21:14:48 +02:00
Stefan Roese
a078c65172 mips: octeon: dts: Add Octeon clock driver DT nodes
This patch adds the DT nodes for the Octeon clock support via the
common clk_ API.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-03 21:11:41 +02:00
Stefan Roese
7ab932825d mips: octeon: dts: Add I2C DT nodes
Add I2C DT nodes to the Octeon dts / dtsi files.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-03 21:11:41 +02:00
Stefan Roese
fad5ec5ecd mips: octeon: mrvl,cn73xx.dtsi: Add GPIO DT nodes
Add the Octeon GPIO DT node to the dtsi file.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-03 21:11:41 +02:00
Stefan Roese
5fef24c912 mips: octeon: Add minimal Octeon 3 EBB7304 EVK support
This patch adds very basic minimal support for the Marvell Octeon 3
CN73xx based EBB7304 EVK. Please note that the basic Octeon port does
not support DDR3/4 initialization yet. To still use U-Boot on with this
port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot
to the prompt on this board.

Supported devices:
- UART
- reset
- CFI parallel NOR flash

Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18 15:47:50 +02:00