u-boot/arch/powerpc/cpu/ppc4xx/speed.c

1210 lines
32 KiB
C
Raw Normal View History

2002-11-03 00:24:07 +00:00
/*
* (C) Copyright 2000-2008
2002-11-03 00:24:07 +00:00
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
2002-11-03 00:24:07 +00:00
*/
#include <common.h>
#include <ppc_asm.tmpl>
#include <asm/ppc4xx.h>
2002-11-03 00:24:07 +00:00
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
2002-11-03 00:24:07 +00:00
#define ONE_BILLION 1000000000
#ifdef DEBUG
#define DEBUGF(fmt,args...) printf(fmt ,##args)
#else
#define DEBUGF(fmt,args...)
#endif
2002-11-03 00:24:07 +00:00
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#if defined(CONFIG_405GP)
2002-11-03 00:24:07 +00:00
void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
2002-11-03 00:24:07 +00:00
{
unsigned long pllmr;
unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
uint pvr = get_pvr();
unsigned long psr;
unsigned long m;
/*
* Read PLL Mode register
*/
pllmr = mfdcr (CPC0_PLLMR);
2002-11-03 00:24:07 +00:00
/*
* Read Pin Strapping register
*/
psr = mfdcr (CPC0_PSR);
2002-11-03 00:24:07 +00:00
/*
* Determine FWD_DIV.
*/
sysInfo->pllFwdDiv = 8 - ((pllmr & PLLMR_FWD_DIV_MASK) >> 29);
/*
* Determine FBK_DIV.
*/
sysInfo->pllFbkDiv = ((pllmr & PLLMR_FB_DIV_MASK) >> 25);
if (sysInfo->pllFbkDiv == 0) {
sysInfo->pllFbkDiv = 16;
}
/*
* Determine PLB_DIV.
*/
sysInfo->pllPlbDiv = ((pllmr & PLLMR_CPU_TO_PLB_MASK) >> 17) + 1;
/*
* Determine PCI_DIV.
*/
sysInfo->pllPciDiv = ((pllmr & PLLMR_PCI_TO_PLB_MASK) >> 13) + 1;
/*
* Determine EXTBUS_DIV.
*/
sysInfo->pllExtBusDiv = ((pllmr & PLLMR_EXB_TO_PLB_MASK) >> 11) + 2;
/*
* Determine OPB_DIV.
*/
sysInfo->pllOpbDiv = ((pllmr & PLLMR_OPB_TO_PLB_MASK) >> 15) + 1;
/*
* Check if PPC405GPr used (mask minor revision field)
*/
2003-04-04 16:00:33 +00:00
if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
2002-11-03 00:24:07 +00:00
/*
* Determine FWD_DIV B (only PPC405GPr with new mode strapping).
*/
sysInfo->pllFwdDivB = 8 - (pllmr & PLLMR_FWDB_DIV_MASK);
/*
* Determine factor m depending on PLL feedback clock source
*/
if (!(psr & PSR_PCI_ASYNC_EN)) {
if (psr & PSR_NEW_MODE_EN) {
/*
* sync pci clock used as feedback (new mode)
*/
m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllPciDiv;
} else {
/*
* sync pci clock used as feedback (legacy mode)
*/
m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllPciDiv;
}
} else if (psr & PSR_NEW_MODE_EN) {
if (psr & PSR_PERCLK_SYNC_MODE_EN) {
/*
* PerClk used as feedback (new mode)
*/
m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllExtBusDiv;
} else {
/*
* CPU clock used as feedback (new mode)
*/
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
}
} else if (sysInfo->pllExtBusDiv == sysInfo->pllFbkDiv) {
/*
* PerClk used as feedback (legacy mode)
*/
m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllExtBusDiv;
} else {
/*
* PLB clock used as feedback (legacy mode)
*/
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv;
}
sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
(unsigned long long)sysClkPeriodPs;
sysInfo->freqProcessor = sysInfo->freqVCOHz / sysInfo->pllFwdDiv;
sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDivB * sysInfo->pllPlbDiv);
2002-11-03 00:24:07 +00:00
} else {
/*
* Check pllFwdDiv to see if running in bypass mode where the CPU speed
* is equal to the 405GP SYS_CLK_FREQ. If not in bypass mode, check VCO
* to make sure it is within the proper range.
* spec: VCO = SYS_CLOCK x FBKDIV x PLBDIV x FWDDIV
* Note freqVCO is calculated in MHz to avoid errors introduced by rounding.
2002-11-03 00:24:07 +00:00
*/
if (sysInfo->pllFwdDiv == 1) {
sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ;
sysInfo->freqPLB = CONFIG_SYS_CLK_FREQ / sysInfo->pllPlbDiv;
} else {
sysInfo->freqVCOHz = ( 1000000000000LL *
(unsigned long long)sysInfo->pllFwdDiv *
(unsigned long long)sysInfo->pllFbkDiv *
(unsigned long long)sysInfo->pllPlbDiv
) / (unsigned long long)sysClkPeriodPs;
sysInfo->freqPLB = (ONE_BILLION / ((sysClkPeriodPs * 10) /
sysInfo->pllFbkDiv)) * 10000;
sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
2002-11-03 00:24:07 +00:00
}
}
sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
sysInfo->freqUART = sysInfo->freqProcessor;
2002-11-03 00:24:07 +00:00
}
/********************************************
* get_PCI_freq
* return PCI bus freq in Hz
*********************************************/
ulong get_PCI_freq (void)
{
ulong val;
PPC4xx_SYS_INFO sys_info;
2002-11-03 00:24:07 +00:00
get_sys_info (&sys_info);
val = sys_info.freqPLB / sys_info.pllPciDiv;
return val;
}
#elif defined(CONFIG_440)
#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_460SX) || defined(CONFIG_APM821XX)
static u8 pll_fwdv_multi_bits[] = {
/* values for: 1 - 16 */
0x00, 0x01, 0x0f, 0x04, 0x09, 0x0a, 0x0d, 0x0e, 0x03, 0x0c,
0x05, 0x08, 0x07, 0x02, 0x0b, 0x06
};
u32 get_cpr0_fwdv(unsigned long cpr_reg_fwdv)
{
u32 index;
for (index = 0; index < ARRAY_SIZE(pll_fwdv_multi_bits); index++)
if (cpr_reg_fwdv == (u32)pll_fwdv_multi_bits[index])
return index + 1;
return 0;
}
static u8 pll_fbdv_multi_bits[] = {
/* values for: 1 - 100 */
0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4,
0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb,
0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96,
0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde,
0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb,
0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91,
0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b,
0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95,
0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4,
0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc,
/* values for: 101 - 200 */
0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe,
0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,
0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6,
0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9,
0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e,
0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf,
/* values for: 201 - 255 */
0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae,
0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2,
0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2,
0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98,
0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81,
0x03, 0x87, 0x0f, 0x9f, 0x3f /* END */
};
u32 get_cpr0_fbdv(unsigned long cpr_reg_fbdv)
{
u32 index;
for (index = 0; index < ARRAY_SIZE(pll_fbdv_multi_bits); index++)
if (cpr_reg_fbdv == (u32)pll_fbdv_multi_bits[index])
return index + 1;
return 0;
}
#if defined(CONFIG_APM821XX)
void get_sys_info(sys_info_t *sysInfo)
{
unsigned long plld;
unsigned long temp;
unsigned long mul;
unsigned long cpudv;
unsigned long plb2dv;
unsigned long ddr2dv;
/* Calculate Forward divisor A and Feeback divisor */
mfcpr(CPR0_PLLD, plld);
temp = CPR0_PLLD_FWDVA(plld);
sysInfo->pllFwdDivA = get_cpr0_fwdv(temp);
temp = CPR0_PLLD_FDV(plld);
sysInfo->pllFbkDiv = get_cpr0_fbdv(temp);
/* Calculate OPB clock divisor */
mfcpr(CPR0_OPBD, temp);
temp = CPR0_OPBD_OPBDV(temp);
sysInfo->pllOpbDiv = temp ? temp : 4;
/* Calculate Peripheral clock divisor */
mfcpr(CPR0_PERD, temp);
temp = CPR0_PERD_PERDV(temp);
sysInfo->pllExtBusDiv = temp ? temp : 4;
/* Calculate CPU clock divisor */
mfcpr(CPR0_CPUD, temp);
temp = CPR0_CPUD_CPUDV(temp);
cpudv = temp ? temp : 8;
/* Calculate PLB2 clock divisor */
mfcpr(CPR0_PLB2D, temp);
temp = CPR0_PLB2D_PLB2DV(temp);
plb2dv = temp ? temp : 4;
/* Calculate DDR2 clock divisor */
mfcpr(CPR0_DDR2D, temp);
temp = CPR0_DDR2D_DDR2DV(temp);
ddr2dv = temp ? temp : 4;
/* Calculate 'M' based on feedback source */
mfcpr(CPR0_PLLC, temp);
temp = CPR0_PLLC_SEL(temp);
if (temp == 0) {
/* PLL internal feedback */
mul = sysInfo->pllFbkDiv;
} else {
/* PLL PerClk feedback */
mul = sysInfo->pllFwdDivA * sysInfo->pllFbkDiv * cpudv
* plb2dv * 2 * sysInfo->pllOpbDiv *
sysInfo->pllExtBusDiv;
}
/* Now calculate the individual clocks */
sysInfo->freqVCOMhz = (mul * CONFIG_SYS_CLK_FREQ) + (mul >> 1);
sysInfo->freqProcessor = sysInfo->freqVCOMhz /
sysInfo->pllFwdDivA / cpudv;
sysInfo->freqPLB = sysInfo->freqVCOMhz /
sysInfo->pllFwdDivA / cpudv / plb2dv / 2;
sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
sysInfo->freqDDR = sysInfo->freqVCOMhz /
sysInfo->pllFwdDivA / cpudv / ddr2dv / 2;
sysInfo->freqUART = sysInfo->freqPLB;
}
#else
/*
* AMCC_TODO: verify this routine against latest EAS, cause stuff changed
* with latest EAS
*/
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long strp0;
unsigned long strp1;
unsigned long temp;
unsigned long m;
unsigned long plbedv0;
/* Extract configured divisors */
mfsdr(SDR0_SDSTP0, strp0);
mfsdr(SDR0_SDSTP1, strp1);
temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 4);
sysInfo->pllFwdDivA = get_cpr0_fwdv(temp);
temp = (strp0 & PLLSYS0_FWD_DIV_B_MASK);
sysInfo->pllFwdDivB = get_cpr0_fwdv(temp);
temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 8;
sysInfo->pllFbkDiv = get_cpr0_fbdv(temp);
temp = (strp1 & PLLSYS0_OPB_DIV_MASK) >> 26;
sysInfo->pllOpbDiv = temp ? temp : 4;
/* AMCC_TODO: verify the SDR0_SDSTP1.PERDV0 value sysInfo->pllExtBusDiv */
temp = (strp1 & PLLSYS0_PERCLK_DIV_MASK) >> 24;
sysInfo->pllExtBusDiv = temp ? temp : 4;
temp = (strp1 & PLLSYS0_PLBEDV0_DIV_MASK) >> 29;
plbedv0 = temp ? temp: 8;
/* Calculate 'M' based on feedback source */
temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
if (temp == 0) {
/* PLL internal feedback */
m = sysInfo->pllFbkDiv;
} else {
/* PLL PerClk feedback */
m = sysInfo->pllFwdDivA * plbedv0 * sysInfo->pllOpbDiv *
sysInfo->pllExtBusDiv;
}
/* Now calculate the individual clocks */
sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
sysInfo->freqPLB = sysInfo->freqVCOMhz / sysInfo->pllFwdDivA / plbedv0;
sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
sysInfo->freqDDR = sysInfo->freqPLB;
sysInfo->freqUART = sysInfo->freqPLB;
return;
}
#endif
#elif defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
void get_sys_info (sys_info_t *sysInfo)
{
unsigned long temp;
unsigned long reg;
unsigned long lfdiv;
unsigned long m;
unsigned long prbdv0;
/*
WARNING: ASSUMES the following:
ENG=1
PRADV0=1
PRBDV0=1
*/
/* Decode CPR0_PLLD0 for divisors */
mfcpr(CPR0_PLLD, reg);
temp = (reg & PLLD_FWDVA_MASK) >> 16;
sysInfo->pllFwdDivA = temp ? temp : 16;
temp = (reg & PLLD_FWDVB_MASK) >> 8;
sysInfo->pllFwdDivB = temp ? temp: 8 ;
temp = (reg & PLLD_FBDV_MASK) >> 24;
sysInfo->pllFbkDiv = temp ? temp : 32;
lfdiv = reg & PLLD_LFBDV_MASK;
mfcpr(CPR0_OPBD0, reg);
temp = (reg & OPBDDV_MASK) >> 24;
sysInfo->pllOpbDiv = temp ? temp : 4;
mfcpr(CPR0_PERD, reg);
temp = (reg & PERDV_MASK) >> 24;
sysInfo->pllExtBusDiv = temp ? temp : 8;
mfcpr(CPR0_PRIMBD0, reg);
temp = (reg & PRBDV_MASK) >> 24;
prbdv0 = temp ? temp : 8;
mfcpr(CPR0_SPCID, reg);
temp = (reg & SPCID_MASK) >> 24;
sysInfo->pllPciDiv = temp ? temp : 4;
/* Calculate 'M' based on feedback source */
mfsdr(SDR0_SDSTP0, reg);
temp = (reg & PLLSYS0_SEL_MASK) >> 27;
if (temp == 0) { /* PLL output */
/* Figure which pll to use */
mfcpr(CPR0_PLLC, reg);
temp = (reg & PLLC_SRC_MASK) >> 29;
if (!temp) /* PLLOUTA */
m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
else /* PLLOUTB */
m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
}
else if (temp == 1) /* CPU output */
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
else /* PerClk */
m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
/* Now calculate the individual clocks */
sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
sysInfo->freqEBC = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
sysInfo->freqUART = sysInfo->freqPLB;
/* Figure which timer source to use */
if (mfspr(SPRN_CCR1) & 0x0080) {
/* External Clock, assume same as SYS_CLK */
temp = sysInfo->freqProcessor / 2; /* Max extern clock speed */
if (CONFIG_SYS_CLK_FREQ > temp)
sysInfo->freqTmrClk = temp;
else
sysInfo->freqTmrClk = CONFIG_SYS_CLK_FREQ;
}
else /* Internal clock */
sysInfo->freqTmrClk = sysInfo->freqProcessor;
}
/********************************************
* get_PCI_freq
* return PCI bus freq in Hz
*********************************************/
ulong get_PCI_freq (void)
{
sys_info_t sys_info;
get_sys_info (&sys_info);
return sys_info.freqPCI;
}
#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) \
&& !defined(CONFIG_XILINX_440)
2002-11-03 00:24:07 +00:00
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long strp0;
unsigned long temp;
unsigned long m;
/* Extract configured divisors */
strp0 = mfdcr( CPC0_STRP0 );
2002-11-03 00:24:07 +00:00
sysInfo->pllFwdDivA = 8 - ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 15);
sysInfo->pllFwdDivB = 8 - ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 12);
temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 18;
sysInfo->pllFbkDiv = temp ? temp : 16;
sysInfo->pllOpbDiv = 1 + ((strp0 & PLLSYS0_OPB_DIV_MASK) >> 10);
sysInfo->pllExtBusDiv = 1 + ((strp0 & PLLSYS0_EPB_DIV_MASK) >> 8);
/* Calculate 'M' based on feedback source */
if( strp0 & PLLSYS0_EXTSL_MASK )
m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
else
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
/* Now calculate the individual clocks */
sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
sysInfo->freqPLB >>= 1;
2002-11-03 00:24:07 +00:00
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
sysInfo->freqUART = sysInfo->freqPLB;
2002-11-03 00:24:07 +00:00
}
#else
#if !defined(CONFIG_XILINX_440)
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long strp0;
unsigned long strp1;
unsigned long temp;
unsigned long temp1;
unsigned long lfdiv;
unsigned long m;
unsigned long prbdv0;
#if defined(CONFIG_YUCCA)
unsigned long sys_freq;
unsigned long sys_per=0;
unsigned long msr;
unsigned long pci_clock_per;
unsigned long sdr_ddrpll;
/*-------------------------------------------------------------------------+
| Get the system clock period.
+-------------------------------------------------------------------------*/
sys_per = determine_sysper();
msr = (mfmsr () & ~(MSR_EE)); /* disable interrupts */
/*-------------------------------------------------------------------------+
| Calculate the system clock speed from the period.
+-------------------------------------------------------------------------*/
sys_freq = (ONE_BILLION / sys_per) * 1000;
#endif
/* Extract configured divisors */
mfsdr( SDR0_SDSTP0,strp0 );
mfsdr( SDR0_SDSTP1,strp1 );
temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 8);
sysInfo->pllFwdDivA = temp ? temp : 16 ;
temp = ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 5);
sysInfo->pllFwdDivB = temp ? temp: 8 ;
temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 12;
sysInfo->pllFbkDiv = temp ? temp : 32;
temp = (strp0 & PLLSYS0_OPB_DIV_MASK);
sysInfo->pllOpbDiv = temp ? temp : 4;
temp = (strp1 & PLLSYS1_PERCLK_DIV_MASK) >> 24;
sysInfo->pllExtBusDiv = temp ? temp : 4;
prbdv0 = (strp0 >> 2) & 0x7;
/* Calculate 'M' based on feedback source */
temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
temp1 = (strp1 & PLLSYS1_LF_DIV_MASK) >> 26;
lfdiv = temp1 ? temp1 : 64;
if (temp == 0) { /* PLL output */
/* Figure which pll to use */
temp = (strp0 & PLLSYS0_SRC_MASK) >> 30;
if (!temp)
m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
else
m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
}
else if (temp == 1) /* CPU output */
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
else /* PerClk */
m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
/* Now calculate the individual clocks */
#if defined(CONFIG_YUCCA)
sysInfo->freqVCOMhz = (m * sys_freq) ;
#else
sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
#endif
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
#if defined(CONFIG_YUCCA)
/* Determine PCI Clock Period */
pci_clock_per = determine_pci_clock_per();
sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000;
mfsdr(SDR0_DDR0, sdr_ddrpll);
sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
#endif
sysInfo->freqUART = sysInfo->freqPLB;
}
#endif
#endif /* CONFIG_XILINX_440 */
#if defined(CONFIG_YUCCA)
unsigned long determine_sysper(void)
{
unsigned int fpga_clocking_reg;
unsigned int master_clock_selection;
unsigned long master_clock_per = 0;
unsigned long fb_div_selection;
unsigned int vco_div_reg_value;
unsigned long vco_div_selection;
unsigned long sys_per = 0;
int extClkVal;
/*-------------------------------------------------------------------------+
| Read FPGA reg 0 and reg 1 to get FPGA reg information
+-------------------------------------------------------------------------*/
fpga_clocking_reg = in16(FPGA_REG16);
/* Determine Master Clock Source Selection */
master_clock_selection = fpga_clocking_reg & FPGA_REG16_MASTER_CLK_MASK;
switch(master_clock_selection) {
case FPGA_REG16_MASTER_CLK_66_66:
master_clock_per = PERIOD_66_66MHZ;
break;
case FPGA_REG16_MASTER_CLK_50:
master_clock_per = PERIOD_50_00MHZ;
break;
case FPGA_REG16_MASTER_CLK_33_33:
master_clock_per = PERIOD_33_33MHZ;
break;
case FPGA_REG16_MASTER_CLK_25:
master_clock_per = PERIOD_25_00MHZ;
break;
case FPGA_REG16_MASTER_CLK_EXT:
if ((extClkVal==EXTCLK_33_33)
&& (extClkVal==EXTCLK_50)
&& (extClkVal==EXTCLK_66_66)
&& (extClkVal==EXTCLK_83)) {
/* calculate master clock period from external clock value */
master_clock_per=(ONE_BILLION/extClkVal) * 1000;
} else {
/* Unsupported */
DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
hang();
}
break;
default:
/* Unsupported */
DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
hang();
break;
}
/* Determine FB divisors values */
if ((fpga_clocking_reg & FPGA_REG16_FB1_DIV_MASK) == FPGA_REG16_FB1_DIV_LOW) {
if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
fb_div_selection = FPGA_FB_DIV_6;
else
fb_div_selection = FPGA_FB_DIV_12;
} else {
if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
fb_div_selection = FPGA_FB_DIV_10;
else
fb_div_selection = FPGA_FB_DIV_20;
}
/* Determine VCO divisors values */
vco_div_reg_value = fpga_clocking_reg & FPGA_REG16_VCO_DIV_MASK;
switch(vco_div_reg_value) {
case FPGA_REG16_VCO_DIV_4:
vco_div_selection = FPGA_VCO_DIV_4;
break;
case FPGA_REG16_VCO_DIV_6:
vco_div_selection = FPGA_VCO_DIV_6;
break;
case FPGA_REG16_VCO_DIV_8:
vco_div_selection = FPGA_VCO_DIV_8;
break;
case FPGA_REG16_VCO_DIV_10:
default:
vco_div_selection = FPGA_VCO_DIV_10;
break;
}
if (master_clock_selection == FPGA_REG16_MASTER_CLK_EXT) {
switch(master_clock_per) {
case PERIOD_25_00MHZ:
if (fb_div_selection == FPGA_FB_DIV_12) {
if (vco_div_selection == FPGA_VCO_DIV_4)
sys_per = PERIOD_75_00MHZ;
if (vco_div_selection == FPGA_VCO_DIV_6)
sys_per = PERIOD_50_00MHZ;
}
break;
case PERIOD_33_33MHZ:
if (fb_div_selection == FPGA_FB_DIV_6) {
if (vco_div_selection == FPGA_VCO_DIV_4)
sys_per = PERIOD_50_00MHZ;
if (vco_div_selection == FPGA_VCO_DIV_6)
sys_per = PERIOD_33_33MHZ;
}
if (fb_div_selection == FPGA_FB_DIV_10) {
if (vco_div_selection == FPGA_VCO_DIV_4)
sys_per = PERIOD_83_33MHZ;
if (vco_div_selection == FPGA_VCO_DIV_10)
sys_per = PERIOD_33_33MHZ;
}
if (fb_div_selection == FPGA_FB_DIV_12) {
if (vco_div_selection == FPGA_VCO_DIV_4)
sys_per = PERIOD_100_00MHZ;
if (vco_div_selection == FPGA_VCO_DIV_6)
sys_per = PERIOD_66_66MHZ;
if (vco_div_selection == FPGA_VCO_DIV_8)
sys_per = PERIOD_50_00MHZ;
}
break;
case PERIOD_50_00MHZ:
if (fb_div_selection == FPGA_FB_DIV_6) {
if (vco_div_selection == FPGA_VCO_DIV_4)
sys_per = PERIOD_75_00MHZ;
if (vco_div_selection == FPGA_VCO_DIV_6)
sys_per = PERIOD_50_00MHZ;
}
if (fb_div_selection == FPGA_FB_DIV_10) {
if (vco_div_selection == FPGA_VCO_DIV_6)
sys_per = PERIOD_83_33MHZ;
if (vco_div_selection == FPGA_VCO_DIV_10)
sys_per = PERIOD_50_00MHZ;
}
if (fb_div_selection == FPGA_FB_DIV_12) {
if (vco_div_selection == FPGA_VCO_DIV_6)
sys_per = PERIOD_100_00MHZ;
if (vco_div_selection == FPGA_VCO_DIV_8)
sys_per = PERIOD_75_00MHZ;
}
break;
case PERIOD_66_66MHZ:
if (fb_div_selection == FPGA_FB_DIV_6) {
if (vco_div_selection == FPGA_VCO_DIV_4)
sys_per = PERIOD_100_00MHZ;
if (vco_div_selection == FPGA_VCO_DIV_6)
sys_per = PERIOD_66_66MHZ;
if (vco_div_selection == FPGA_VCO_DIV_8)
sys_per = PERIOD_50_00MHZ;
}
if (fb_div_selection == FPGA_FB_DIV_10) {
if (vco_div_selection == FPGA_VCO_DIV_8)
sys_per = PERIOD_83_33MHZ;
if (vco_div_selection == FPGA_VCO_DIV_10)
sys_per = PERIOD_66_66MHZ;
}
if (fb_div_selection == FPGA_FB_DIV_12) {
if (vco_div_selection == FPGA_VCO_DIV_8)
sys_per = PERIOD_100_00MHZ;
}
break;
default:
break;
}
if (sys_per == 0) {
/* Other combinations are not supported */
DEBUGF ("%s[%d] *** sys period compute failed ***\n", __FUNCTION__,__LINE__);
hang();
}
} else {
/* calcul system clock without cheking */
/* if engineering option clock no check is selected */
/* sys_per = master_clock_per * vco_div_selection / fb_div_selection */
sys_per = (master_clock_per/fb_div_selection) * vco_div_selection;
}
return(sys_per);
}
/*-------------------------------------------------------------------------+
| determine_pci_clock_per.
+-------------------------------------------------------------------------*/
unsigned long determine_pci_clock_per(void)
{
unsigned long pci_clock_selection, pci_period;
/*-------------------------------------------------------------------------+
| Read FPGA reg 6 to get PCI 0 FPGA reg information
+-------------------------------------------------------------------------*/
pci_clock_selection = in16(FPGA_REG16); /* was reg6 averifier */
pci_clock_selection = pci_clock_selection & FPGA_REG16_PCI0_CLK_MASK;
switch (pci_clock_selection) {
case FPGA_REG16_PCI0_CLK_133_33:
pci_period = PERIOD_133_33MHZ;
break;
case FPGA_REG16_PCI0_CLK_100:
pci_period = PERIOD_100_00MHZ;
break;
case FPGA_REG16_PCI0_CLK_66_66:
pci_period = PERIOD_66_66MHZ;
break;
default:
pci_period = PERIOD_33_33MHZ;;
break;
}
return(pci_period);
}
#endif
2002-11-03 00:24:07 +00:00
#elif defined(CONFIG_XILINX_405)
extern void get_sys_info (sys_info_t * sysInfo);
extern ulong get_PCI_freq (void);
2002-11-03 00:24:07 +00:00
#elif defined(CONFIG_405)
void get_sys_info (sys_info_t * sysInfo)
{
2002-11-03 00:24:07 +00:00
sysInfo->freqVCOMhz=3125000;
sysInfo->freqProcessor=12*1000*1000;
sysInfo->freqPLB=50*1000*1000;
sysInfo->freqPCI=66*1000*1000;
}
2003-05-23 11:18:02 +00:00
#elif defined(CONFIG_405EP)
void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
2003-05-23 11:18:02 +00:00
{
unsigned long pllmr0;
unsigned long pllmr1;
unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
unsigned long m;
unsigned long pllmr0_ccdv;
/*
* Read PLL Mode registers
*/
pllmr0 = mfdcr (CPC0_PLLMR0);
pllmr1 = mfdcr (CPC0_PLLMR1);
2003-05-23 11:18:02 +00:00
/*
* Determine forward divider A
*/
sysInfo->pllFwdDiv = 8 - ((pllmr1 & PLLMR1_FWDVA_MASK) >> 16);
/*
* Determine forward divider B (should be equal to A)
*/
sysInfo->pllFwdDivB = 8 - ((pllmr1 & PLLMR1_FWDVB_MASK) >> 12);
/*
* Determine FBK_DIV.
*/
sysInfo->pllFbkDiv = ((pllmr1 & PLLMR1_FBMUL_MASK) >> 20);
if (sysInfo->pllFbkDiv == 0)
2003-05-23 11:18:02 +00:00
sysInfo->pllFbkDiv = 16;
/*
* Determine PLB_DIV.
*/
sysInfo->pllPlbDiv = ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) >> 16) + 1;
/*
* Determine PCI_DIV.
*/
sysInfo->pllPciDiv = (pllmr0 & PLLMR0_PCI_TO_PLB_MASK) + 1;
/*
* Determine EXTBUS_DIV.
*/
sysInfo->pllExtBusDiv = ((pllmr0 & PLLMR0_EXB_TO_PLB_MASK) >> 8) + 2;
/*
* Determine OPB_DIV.
*/
sysInfo->pllOpbDiv = ((pllmr0 & PLLMR0_OPB_TO_PLB_MASK) >> 12) + 1;
/*
* Determine the M factor
*/
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
/*
* Determine VCO clock frequency
*/
sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
(unsigned long long)sysClkPeriodPs;
2003-05-23 11:18:02 +00:00
/*
* Determine CPU clock frequency
*/
pllmr0_ccdv = ((pllmr0 & PLLMR0_CPU_DIV_MASK) >> 20) + 1;
if (pllmr1 & PLLMR1_SSCS_MASK) {
/*
* This is true if FWDVA == FWDVB:
* sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv)
* / pllmr0_ccdv;
*/
sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv * sysInfo->pllFwdDivB)
/ sysInfo->pllFwdDiv / pllmr0_ccdv;
2003-05-23 11:18:02 +00:00
} else {
sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv;
}
/*
* Determine PLB clock frequency
*/
sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
sysInfo->freqUART = sysInfo->freqProcessor * pllmr0_ccdv;
2003-05-23 11:18:02 +00:00
}
/********************************************
* get_PCI_freq
* return PCI bus freq in Hz
*********************************************/
ulong get_PCI_freq (void)
{
ulong val;
PPC4xx_SYS_INFO sys_info;
2003-05-23 11:18:02 +00:00
get_sys_info (&sys_info);
val = sys_info.freqPLB / sys_info.pllPciDiv;
return val;
}
#elif defined(CONFIG_405EZ)
void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
{
unsigned long cpr_plld;
unsigned long cpr_pllc;
unsigned long cpr_primad;
unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000);
unsigned long primad_cpudv;
unsigned long m;
unsigned long plloutb;
/*
* Read PLL Mode registers
*/
mfcpr(CPR0_PLLD, cpr_plld);
mfcpr(CPR0_PLLC, cpr_pllc);
/*
* Determine forward divider A
*/
sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
/*
* Determine forward divider B
*/
sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
if (sysInfo->pllFwdDivB == 0)
sysInfo->pllFwdDivB = 8;
/*
* Determine FBK_DIV.
*/
sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
if (sysInfo->pllFbkDiv == 0)
sysInfo->pllFbkDiv = 256;
/*
* Read CPR_PRIMAD register
*/
mfcpr(CPR0_PRIMAD, cpr_primad);
/*
* Determine PLB_DIV.
*/
sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
if (sysInfo->pllPlbDiv == 0)
sysInfo->pllPlbDiv = 16;
/*
* Determine EXTBUS_DIV.
*/
sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
if (sysInfo->pllExtBusDiv == 0)
sysInfo->pllExtBusDiv = 16;
/*
* Determine OPB_DIV.
*/
sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
if (sysInfo->pllOpbDiv == 0)
sysInfo->pllOpbDiv = 16;
/*
* Determine the M factor
*/
if (cpr_pllc & PLLC_SRC_MASK)
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
else
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
/*
* Determine VCO clock frequency
*/
sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
(unsigned long long)sysClkPeriodPs;
/*
* Determine CPU clock frequency
*/
primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
if (primad_cpudv == 0)
primad_cpudv = 16;
sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * m) /
sysInfo->pllFwdDiv / primad_cpudv;
/*
* Determine PLB clock frequency
*/
sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * m) /
sysInfo->pllFwdDiv / sysInfo->pllPlbDiv;
sysInfo->freqOPB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
sysInfo->pllOpbDiv;
sysInfo->freqEBC = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
sysInfo->pllExtBusDiv;
plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
sysInfo->pllFwdDivB : sysInfo->pllFwdDiv) * sysInfo->pllFbkDiv) /
sysInfo->pllFwdDivB);
sysInfo->freqUART = plloutb;
}
#elif defined(CONFIG_405EX)
/*
* TODO: We need to get the CPR registers and calculate these values correctly!!!!
* We need the specs!!!!
*/
static unsigned char get_fbdv(unsigned char index)
{
unsigned char ret = 0;
/* This is table should be 256 bytes.
* Only take first 52 values.
*/
unsigned char fbdv_tb[] = {
0x00, 0xff, 0x7f, 0xfd,
0x7a, 0xf5, 0x6a, 0xd5,
0x2a, 0xd4, 0x29, 0xd3,
0x26, 0xcc, 0x19, 0xb3,
0x67, 0xce, 0x1d, 0xbb,
0x77, 0xee, 0x5d, 0xba,
0x74, 0xe9, 0x52, 0xa5,
0x4b, 0x96, 0x2c, 0xd8,
0x31, 0xe3, 0x46, 0x8d,
0x1b, 0xb7, 0x6f, 0xde,
0x3d, 0xfb, 0x76, 0xed,
0x5a, 0xb5, 0x6b, 0xd6,
0x2d, 0xdb, 0x36, 0xec,
};
if ((index & 0x7f) == 0)
return 1;
while (ret < sizeof (fbdv_tb)) {
if (fbdv_tb[ret] == index)
break;
ret++;
}
ret++;
return ret;
}
#define PLL_FBK_PLL_LOCAL 0
#define PLL_FBK_CPU 1
#define PLL_FBK_PERCLK 5
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
unsigned long m = 1;
unsigned int tmp;
unsigned char fwdva[16] = {
1, 2, 14, 9, 4, 11, 16, 13,
12, 5, 6, 15, 10, 7, 8, 3,
};
unsigned char sel, cpudv0, plb2xDiv;
mfcpr(CPR0_PLLD, tmp);
/*
* Determine forward divider A
*/
sysInfo->pllFwdDiv = fwdva[((tmp >> 16) & 0x0f)]; /* FWDVA */
/*
* Determine FBK_DIV.
*/
sysInfo->pllFbkDiv = get_fbdv(((tmp >> 24) & 0x0ff)); /* FBDV */
/*
* Determine PLBDV0
*/
sysInfo->pllPlbDiv = 2;
/*
* Determine PERDV0
*/
mfcpr(CPR0_PERD, tmp);
tmp = (tmp >> 24) & 0x03;
sysInfo->pllExtBusDiv = (tmp == 0) ? 4 : tmp;
/*
* Determine OPBDV0
*/
mfcpr(CPR0_OPBD0, tmp);
tmp = (tmp >> 24) & 0x03;
sysInfo->pllOpbDiv = (tmp == 0) ? 4 : tmp;
/* Determine PLB2XDV0 */
mfcpr(CPR0_PLBD, tmp);
tmp = (tmp >> 16) & 0x07;
plb2xDiv = (tmp == 0) ? 8 : tmp;
/* Determine CPUDV0 */
mfcpr(CPR0_CPUD, tmp);
tmp = (tmp >> 24) & 0x07;
cpudv0 = (tmp == 0) ? 8 : tmp;
/* Determine SEL(5:7) in CPR0_PLLC */
mfcpr(CPR0_PLLC, tmp);
sel = (tmp >> 24) & 0x07;
/*
* Determine the M factor
* PLL local: M = FBDV
* CPU clock: M = FBDV * FWDVA * CPUDV0
* PerClk : M = FBDV * FWDVA * PLB2XDV0 * PLBDV0(2) * OPBDV0 * PERDV0
*
*/
switch (sel) {
case PLL_FBK_CPU:
m = sysInfo->pllFwdDiv * cpudv0;
break;
case PLL_FBK_PERCLK:
m = sysInfo->pllFwdDiv * plb2xDiv * 2
* sysInfo->pllOpbDiv * sysInfo->pllExtBusDiv;
break;
case PLL_FBK_PLL_LOCAL:
break;
default:
printf("%s unknown m\n", __FUNCTION__);
return;
}
m *= sysInfo->pllFbkDiv;
/*
* Determine VCO clock frequency
*/
sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
(unsigned long long)sysClkPeriodPs;
/*
* Determine CPU clock frequency
*/
sysInfo->freqProcessor = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * cpudv0);
/*
* Determine PLB clock frequency, ddr1x should be the same
*/
sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * plb2xDiv * 2);
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
sysInfo->freqDDR = sysInfo->freqPLB;
sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
sysInfo->freqUART = sysInfo->freqPLB;
}
2002-11-03 00:24:07 +00:00
#endif
int get_clocks (void)
{
sys_info_t sys_info;
get_sys_info (&sys_info);
gd->cpu_clk = sys_info.freqProcessor;
gd->bus_clk = sys_info.freqPLB;
return (0);
}
/********************************************
* get_bus_freq
* return PLB bus freq in Hz
*********************************************/
ulong get_bus_freq (ulong dummy)
{
ulong val;
#if defined(CONFIG_405GP) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
defined(CONFIG_405EX) || defined(CONFIG_405) || \
defined(CONFIG_440)
2002-11-03 00:24:07 +00:00
sys_info_t sys_info;
get_sys_info (&sys_info);
val = sys_info.freqPLB;
#else
# error get_bus_freq() not implemented
#endif
return val;
}
ulong get_OPB_freq (void)
{
PPC4xx_SYS_INFO sys_info;
get_sys_info (&sys_info);
return sys_info.freqOPB;
}