u-boot/tools/Makefile

297 lines
8.9 KiB
Makefile
Raw Normal View History

2002-07-20 20:14:13 +00:00
#
# (C) Copyright 2000-2006
2002-07-20 20:14:13 +00:00
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
2002-07-20 20:14:13 +00:00
#
# Enable all the config-independent tools
ifneq ($(HOST_TOOLS_ALL),)
CONFIG_LCD_LOGO = y
CONFIG_CMD_LOADS = y
CONFIG_CMD_NET = y
CONFIG_XWAY_SWAP_BYTES = y
CONFIG_NETCONSOLE = y
CONFIG_SHA1_CHECK_UB_IMG = y
CONFIG_ARCH_SUNXI = y
endif
subdir-$(HOST_TOOLS_ALL) += easylogo
subdir-$(HOST_TOOLS_ALL) += gdb
# Merge all the different vars for envcrc into one
ENVCRC-$(CONFIG_ENV_IS_EMBEDDED) = y
ENVCRC-$(CONFIG_ENV_IS_IN_DATAFLASH) = y
ENVCRC-$(CONFIG_ENV_IS_IN_EEPROM) = y
ENVCRC-$(CONFIG_ENV_IS_IN_FLASH) = y
ENVCRC-$(CONFIG_ENV_IS_IN_ONENAND) = y
ENVCRC-$(CONFIG_ENV_IS_IN_NAND) = y
ENVCRC-$(CONFIG_ENV_IS_IN_NVRAM) = y
ENVCRC-$(CONFIG_ENV_IS_IN_SPI_FLASH) = y
CONFIG_BUILD_ENVCRC ?= $(ENVCRC-y)
hostprogs-$(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER) += atmel_pmecc_params
hostprogs-$(CONFIG_LCD_LOGO) += bmp_logo
hostprogs-$(CONFIG_VIDEO_LOGO) += bmp_logo
HOSTCFLAGS_bmp_logo.o := -pedantic
hostprogs-$(CONFIG_BUILD_ENVCRC) += envcrc
envcrc-objs := envcrc.o lib/crc32.o env/embedded.o lib/sha1.o
hostprogs-$(CONFIG_CMD_NET) += gen_eth_addr
HOSTCFLAGS_gen_eth_addr.o := -pedantic
hostprogs-$(CONFIG_CMD_NET) += gen_ethaddr_crc
gen_ethaddr_crc-objs := gen_ethaddr_crc.o lib/crc8.o
HOSTCFLAGS_gen_ethaddr_crc.o := -pedantic
hostprogs-$(CONFIG_CMD_LOADS) += img2srec
HOSTCFLAGS_img2srec.o := -pedantic
hostprogs-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes
HOSTCFLAGS_xway-swap-bytes.o := -pedantic
hostprogs-y += mkenvimage
mkenvimage-objs := mkenvimage.o os_support.o lib/crc32.o
hostprogs-y += dumpimage mkimage
hostprogs-$(CONFIG_FIT_SIGNATURE) += fit_info fit_check_sign
FIT_SIG_OBJS-$(CONFIG_FIT_SIGNATURE) := common/image-sig.o
# Flattened device tree objects
LIBFDT_CSRCS := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c \
fdt_empty_tree.c fdt_addresses.c fdt_overlay.c \
fdt_region.c
# Unfortunately setup.py below cannot handle srctree being ".." which it often
# is. It fails with an error like:
# Fatal error: can't create build/temp.linux-x86_64-2.7/../lib/libfdt/fdt.o:
# No such file or directory
# To fix this, use an absolute path.
libfdt_tree := $(shell readlink -f $(srctree)/lib/libfdt)
LIBFDT_SRCS := $(addprefix $(libfdt_tree)/, $(LIBFDT_CSRCS))
LIBFDT_SWIG := $(addprefix $(libfdt_tree)/, pylibfdt/libfdt.i)
LIBFDT_OBJS := $(addprefix lib/libfdt/, $(patsubst %.c, %.o, $(LIBFDT_CSRCS)))
RSA_OBJS-$(CONFIG_FIT_SIGNATURE) := $(addprefix lib/rsa/, \
rsa-sign.o rsa-verify.o rsa-checksum.o \
rsa-mod-exp.o)
ROCKCHIP_OBS = lib/rc4.o rkcommon.o rkimage.o rksd.o rkspi.o
# common objs for dumpimage and mkimage
dumpimage-mkimage-objs := aisimage.o \
atmelimage.o \
$(FIT_SIG_OBJS-y) \
common/bootm.o \
lib/crc32.o \
default_image.o \
lib/fdtdec_common.o \
lib/fdtdec.o \
fit_common.o \
fit_image.o \
common/image-fit.o \
image-host.o \
common/image.o \
imagetool.o \
imximage.o \
kwbimage.o \
lib/md5.o \
lpc32xximage.o \
mxsimage.o \
omapimage.o \
os_support.o \
pblimage.o \
pbl_crc32.o \
vybridimage.o \
$(ROCKCHIP_OBS) \
socfpgaimage.o \
lib/sha1.o \
lib/sha256.o \
common/hash.o \
ublimage.o \
zynqimage.o \
zynqmpimage.o \
$(LIBFDT_OBJS) \
gpimage.o \
gpimage-common.o \
$(RSA_OBJS-y)
dumpimage-objs := $(dumpimage-mkimage-objs) dumpimage.o
mkimage-objs := $(dumpimage-mkimage-objs) mkimage.o
fit_info-objs := $(dumpimage-mkimage-objs) fit_info.o
fit_check_sign-objs := $(dumpimage-mkimage-objs) fit_check_sign.o
# Unfortunately setup.py (or actually the Python distutil implementation)
# puts files into the same directory as the .i file. We cannot touch the source
# directory, so we copy the .i file into the tools/ build subdirectory before
# calling setup. This directory is safe to write to. This ensures that we get
# all three files in $(obj)/tools: _libfdt.so, libfdt.py and libfdt_wrap.c
# The latter is a temporary file which we could actually remove.
tools/_libfdt.so: $(LIBFDT_SRCS) $(LIBFDT_SWIG)
$(Q)cp $(LIBFDT_SWIG) tools/.
$(Q)unset CC; \
unset CROSS_COMPILE; \
LDFLAGS="$(HOSTLDFLAGS)" CFLAGS= VERSION="u-boot-$(UBOOTVERSION)" \
CPPFLAGS="$(_hostc_flags)" OBJDIR=tools \
SOURCES="$(LIBFDT_SRCS) tools/libfdt.i" \
SWIG_OPTS="-I$(srctree)/lib/libfdt -I$(srctree)/lib" \
$(PYTHON) $(libfdt_tree)/pylibfdt/setup.py --quiet build_ext \
--build-lib tools
ifneq ($(CONFIG_MX23)$(CONFIG_MX28),)
# Add CONFIG_MXS into host CFLAGS, so we can check whether or not register
# the mxsimage support within tools/mxsimage.c .
HOSTCFLAGS_mxsimage.o += -DCONFIG_MXS
endif
ifdef CONFIG_FIT_SIGNATURE
# This affects include/image.h, but including the board config file
# is tricky, so manually define this options here.
HOST_EXTRACFLAGS += -DCONFIG_FIT_SIGNATURE
endif
ifdef CONFIG_SYS_U_BOOT_OFFS
HOSTCFLAGS_kwbimage.o += -DCONFIG_SYS_U_BOOT_OFFS=$(CONFIG_SYS_U_BOOT_OFFS)
endif
ifneq ($(CONFIG_ARMADA_38X)$(CONFIG_ARMADA_39X),)
HOSTCFLAGS_kwbimage.o += -DCONFIG_KWB_SECURE
endif
# MXSImage needs LibSSL
ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_ARMADA_38X)$(CONFIG_ARMADA_39X)$(CONFIG_FIT_SIGNATURE),)
HOSTLOADLIBES_mkimage += \
$(shell pkg-config --libs libssl libcrypto 2> /dev/null || echo "-lssl -lcrypto")
# OS X deprecate openssl in favour of CommonCrypto, supress deprecation
# warnings on those systems
ifeq ($(HOSTOS),darwin)
HOSTCFLAGS_mxsimage.o += -Wno-deprecated-declarations
HOSTCFLAGS_image-sig.o += -Wno-deprecated-declarations
HOSTCFLAGS_rsa-sign.o += -Wno-deprecated-declarations
endif
endif
HOSTCFLAGS_fit_image.o += -DMKIMAGE_DTC=\"$(DTC)\"
HOSTLOADLIBES_dumpimage := $(HOSTLOADLIBES_mkimage)
HOSTLOADLIBES_fit_info := $(HOSTLOADLIBES_mkimage)
HOSTLOADLIBES_fit_check_sign := $(HOSTLOADLIBES_mkimage)
hostprogs-$(CONFIG_EXYNOS5250) += mkexynosspl
hostprogs-$(CONFIG_EXYNOS5420) += mkexynosspl
HOSTCFLAGS_mkexynosspl.o := -pedantic
ifdtool-objs := $(LIBFDT_OBJS) ifdtool.o
hostprogs-$(CONFIG_X86) += ifdtool
hostprogs-$(CONFIG_MX23) += mxsboot
hostprogs-$(CONFIG_MX28) += mxsboot
HOSTCFLAGS_mxsboot.o := -pedantic
hostprogs-$(CONFIG_ARCH_SUNXI) += mksunxiboot
hostprogs-$(CONFIG_ARCH_SUNXI) += sunxi-spl-image-builder
sunxi-spl-image-builder-objs := sunxi-spl-image-builder.o lib/bch.o
hostprogs-$(CONFIG_NETCONSOLE) += ncb
hostprogs-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1
ubsha1-objs := os_support.o ubsha1.o lib/sha1.o
HOSTCFLAGS_ubsha1.o := -pedantic
hostprogs-$(CONFIG_KIRKWOOD) += kwboot
hostprogs-$(CONFIG_ARCH_MVEBU) += kwboot
hostprogs-y += proftool
hostprogs-$(CONFIG_STATIC_RELA) += relocate-rela
hostprogs-y += fdtgrep
fdtgrep-objs += $(LIBFDT_OBJS) fdtgrep.o
MIPS: Stop building position independent code U-Boot has up until now built with -fpic for the MIPS architecture, producing position independent code which uses indirection through a global offset table, making relocation fairly straightforward as it simply involves patching up GOT entries. Using -fpic does however have some downsides. The biggest of these is that generated code is bloated in various ways. For example, function calls are indirected through the GOT & the t9 register: 8f998064 lw t9,-32668(gp) 0320f809 jalr t9 Without -fpic the call is simply: 0f803f01 jal be00fc04 <puts> This is more compact & faster (due to the lack of the load & the dependency the jump has on its result). It is also easier to read & debug because the disassembly shows what function is being called, rather than just an offset from gp which would then have to be looked up in the ELF to discover the target function. Another disadvantage of -fpic is that each function begins with a sequence to calculate the value of the gp register, for example: 3c1c0004 lui gp,0x4 279c3384 addiu gp,gp,13188 0399e021 addu gp,gp,t9 Without using -fpic this sequence no longer appears at the start of each function, reducing code size considerably. This patch switches U-Boot from building with -fpic to building with -fno-pic, in order to gain the benefits described above. The cost of this is an extra step during the build process to extract relocation data from the ELF & write it into a new .rel section in a compact format, plus the added complexity of dealing with multiple types of relocation rather than the single type that applied to the GOT. The benefit is smaller, cleaner, more debuggable code. The relocate_code() function is reimplemented in C to handle the new relocation scheme, which also makes it easier to read & debug. Taking maltael_defconfig as an example the size of u-boot.bin built using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils 2.24.90) shrinks from 254KiB to 224KiB. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: u-boot@lists.denx.de Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-06-19 18:53:47 +00:00
hostprogs-$(CONFIG_MIPS) += mips-relocs
# We build some files with extra pedantic flags to try to minimize things
# that won't build on some weird host compiler -- though there are lots of
# exceptions for files that aren't complaint.
HOSTCFLAGS_crc32.o := -pedantic
HOSTCFLAGS_crc8.o := -pedantic
HOSTCFLAGS_md5.o := -pedantic
HOSTCFLAGS_sha1.o := -pedantic
HOSTCFLAGS_sha256.o := -pedantic
quiet_cmd_wrap = WRAP $@
kbuild: sync top Makefile with Linux 3.18-rc1 Since Linux 3.15, relative path feature and related fixes, cleanups have been merged to the top Makefile. The relative path feature looks stable enough, so let's import it to U-Boot along with various cleanups. Commits imported from Linux (some need adjustment) are: [1] commit 7e1c04779efd by Michal Marek kbuild: Use relative path for $(objtree) [2] commit 890676c65d69 by Michal Marek kbuild: Use relative path when building in the source tree [3] commit 9da0763bdd82 by Michal Marek kbuild: Use relative path when building in a subdir of the source tree [4] commit c2e28dc975ea by Michal Marek kbuild: Print the name of the build directory [5] commit 066b7ed95580 by Michal Marek kbuild: Do not print the build directory with make -s [6] commit 3f1d9a6cec01 by Michal Marek kbuild: make -s should be used with kernelrelease/kernelversion/image_name [7] commit 7ff525712acf by Masahiro Yamada kbuild: fake the "Entering directory ..." message more simply [8] commit 745a254322c8 by Masahiro Yamada kbuild: use $(Q) for sub-make target [9] commit aa55c8e2f7a3 by Masahiro Yamada kbuild: handle C=... and M=... after entering into build directory [10] commit ab7474ea5361 by Borislav Petkov Kbuild: Ignore GREP_OPTIONS env variable To use relative path feature, tools/Makefile and scripts/Makefile.autoconf must be tweaked. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-30 02:06:11 +00:00
cmd_wrap = echo "\#include <../$(patsubst $(obj)/%,%,$@)>" >$@
$(obj)/lib/%.c $(obj)/common/%.c $(obj)/env/%.c:
$(call cmd,wrap)
clean-dirs := lib common
always := $(hostprogs-y)
# Build a libfdt Python module if swig is available
# Use 'sudo apt-get install swig libpython-dev' to enable this
always += $(if $(shell which swig 2> /dev/null),_libfdt.so)
# Generated LCD/video logo
LOGO_H = $(objtree)/include/bmp_logo.h
LOGO_DATA_H = $(objtree)/include/bmp_logo_data.h
LOGO-$(CONFIG_LCD_LOGO) += $(LOGO_H)
LOGO-$(CONFIG_LCD_LOGO) += $(LOGO_DATA_H)
LOGO-$(CONFIG_VIDEO_LOGO) += $(LOGO_H)
LOGO-$(CONFIG_VIDEO_LOGO) += $(LOGO_DATA_H)
# Generic logo
ifeq ($(LOGO_BMP),)
LOGO_BMP= $(srctree)/$(src)/logos/denx.bmp
# Use board logo and fallback to vendor
ifneq ($(wildcard $(srctree)/$(src)/logos/$(BOARD).bmp),)
LOGO_BMP= $(srctree)/$(src)/logos/$(BOARD).bmp
else
ifneq ($(wildcard $(srctree)/$(src)/logos/$(VENDOR).bmp),)
LOGO_BMP= $(srctree)/$(src)/logos/$(VENDOR).bmp
endif
endif
endif # !LOGO_BMP
2002-07-20 20:14:13 +00:00
#
# Use native tools and options
# Define __KERNEL_STRICT_NAMES to prevent typedef overlaps
# Define _GNU_SOURCE to obtain the getline prototype from stdio.h
2002-07-20 20:14:13 +00:00
#
HOST_EXTRACFLAGS += -include $(srctree)/include/libfdt_env.h \
kconfig: switch to Kconfig This commit enables Kconfig. Going forward, we use Kconfig for the board configuration. mkconfig will never be used. Nor will include/config.mk be generated. Kconfig must be adjusted for U-Boot because our situation is a little more complicated than Linux Kernel. We have to generate multiple boot images (Normal, SPL, TPL) from one source tree. Each image needs its own configuration input. Usage: Run "make <board>_defconfig" to do the board configuration. It will create the .config file and additionally spl/.config, tpl/.config if SPL, TPL is enabled, respectively. You can use "make config", "make menuconfig" etc. to create a new .config or modify the existing one. Use "make spl/config", "make spl/menuconfig" etc. for spl/.config and do likewise for tpl/.config file. The generic syntax of configuration targets for SPL, TPL is: <target_image>/<config_command> Here, <target_image> is either 'spl' or 'tpl' <config_command> is 'config', 'menuconfig', 'xconfig', etc. When the configuration is done, run "make". (Or "make <board>_defconfig all" will do the configuration and build in one time.) For futher information of how Kconfig works in U-Boot, please read the comment block of scripts/multiconfig.py. By the way, there is another item worth remarking here: coexistence of Kconfig and board herder files. Prior to Kconfig, we used C headers to define a set of configs. We expect a very long term to migrate from C headers to Kconfig. Two different infractructure must coexist in the interim. In our former configuration scheme, include/autoconf.mk was generated for use in makefiles. It is still generated under include/, spl/include/, tpl/include/ directory for the Normal, SPL, TPL image, respectively. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:17 +00:00
$(patsubst -I%,-idirafter%, $(filter -I%, $(UBOOTINCLUDE))) \
-I$(srctree)/lib/libfdt \
-I$(srctree)/tools \
-DUSE_HOSTCC \
-D__KERNEL_STRICT_NAMES \
-D_GNU_SOURCE
__build: $(LOGO-y)
2002-07-20 20:14:13 +00:00
$(LOGO_H): $(obj)/bmp_logo $(LOGO_BMP)
$(obj)/bmp_logo --gen-info $(LOGO_BMP) > $@
$(LOGO_DATA_H): $(obj)/bmp_logo $(LOGO_BMP)
$(obj)/bmp_logo --gen-data $(LOGO_BMP) > $@
# Let clean descend into subdirs
subdir- += env
ifneq ($(CROSS_BUILD_TOOLS),)
override HOSTCC = $(CC)
quiet_cmd_crosstools_strip = STRIP $^
cmd_crosstools_strip = $(STRIP) $^; touch $@
$(obj)/.strip: $(call objectify,$(filter $(always),$(hostprogs-y)))
$(call cmd,crosstools_strip)
always += .strip
endif
clean-files += .strip