u-boot/tools/Makefile

329 lines
9.7 KiB
Makefile
Raw Normal View History

# SPDX-License-Identifier: GPL-2.0+
2002-07-20 20:14:13 +00:00
#
# (C) Copyright 2000-2006
2002-07-20 20:14:13 +00:00
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
tools: Use a single target-independent config to enable OpenSSL Host tool features, such as mkimage's ability to sign FIT images were enabled or disabled based on the target configuration. However, this misses the point of a target-agnostic host tool. A target's ability to verify FIT signatures is independent of mkimage's ability to create those signatures. In fact, u-boot's build system doesn't sign images. The target code can be successfully built without relying on any ability to sign such code. Conversely, mkimage's ability to sign images does not require that those images will only work on targets which support FIT verification. Linking mkimage cryptographic features to target support for FIT verification is misguided. Without loss of generality, we can say that host features are and should be independent of target features. While we prefer that a host tool always supports the same feature set, we recognize the following - some users prefer to build u-boot without a dependency on OpenSSL. - some distros prefer to ship mkimage without linking to OpenSSL To allow these use cases, introduce a host-only Kconfig which is used to select or deselect libcrypto support. Some mkimage features or some host tools might not be available, but this shouldn't affect the u-boot build. I also considered setting the default of this config based on FIT_SIGNATURE. While it would preserve the old behaviour it's also contrary to the goals of this change. I decided to enable it by default, so that the default build yields the most feature-complete mkimage. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-14 22:05:47 +00:00
# A note on target vs host configuration:
#
# Host tools can be used across multiple targets, or different configurations
# of the same target. Thus, host tools must be able to handle any combination
# of target configurations. To prevent having different variations of the same
# tool, the tool build options may not depend on target configuration.
#
# Some linux distributions package these utilities as u-boot-tools, and it
# would be unmaintainable to have a different tool variation for each
# arch or configuration.
#
# A couple of simple rules:
#
# 1) Do not use target CONFIG_* options to enable or disable features in host
# tools. Only use the configs from tools/Kconfig
# 2) It's okay to use target configs to disable building specific tools.
# That's as long as the features of those tools aren't modified.
#
# Enable all the config-independent tools
ifneq ($(HOST_TOOLS_ALL),)
CONFIG_ARCH_KIRKWOOD = y
CONFIG_LCD_LOGO = y
CONFIG_CMD_LOADS = y
CONFIG_CMD_NET = y
CONFIG_XWAY_SWAP_BYTES = y
CONFIG_NETCONSOLE = y
CONFIG_SHA1_CHECK_UB_IMG = y
CONFIG_ARCH_SUNXI = y
endif
subdir-$(HOST_TOOLS_ALL) += gdb
# Merge all the different vars for envcrc into one
ENVCRC-$(CONFIG_ENV_IS_EMBEDDED) = y
ENVCRC-$(CONFIG_ENV_IS_IN_EEPROM) = y
ENVCRC-$(CONFIG_ENV_IS_IN_FLASH) = y
ENVCRC-$(CONFIG_ENV_IS_IN_ONENAND) = y
ENVCRC-$(CONFIG_ENV_IS_IN_NAND) = y
ENVCRC-$(CONFIG_ENV_IS_IN_NVRAM) = y
ENVCRC-$(CONFIG_ENV_IS_IN_SPI_FLASH) = y
CONFIG_BUILD_ENVCRC ?= $(ENVCRC-y)
hostprogs-$(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER) += atmel_pmecc_params
hostprogs-$(CONFIG_LCD_LOGO) += bmp_logo
hostprogs-$(CONFIG_VIDEO_LOGO) += bmp_logo
HOSTCFLAGS_bmp_logo.o := -pedantic
hostprogs-$(CONFIG_BUILD_ENVCRC) += envcrc
envcrc-objs := envcrc.o lib/crc32.o env/embedded.o lib/sha1.o
hostprogs-$(CONFIG_CMD_NET) += gen_eth_addr
HOSTCFLAGS_gen_eth_addr.o := -pedantic
hostprogs-$(CONFIG_CMD_NET) += gen_ethaddr_crc
gen_ethaddr_crc-objs := gen_ethaddr_crc.o lib/crc8.o
HOSTCFLAGS_gen_ethaddr_crc.o := -pedantic
hostprogs-$(CONFIG_CMD_LOADS) += img2srec
HOSTCFLAGS_img2srec.o := -pedantic
hostprogs-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes
HOSTCFLAGS_xway-swap-bytes.o := -pedantic
hostprogs-y += mkenvimage
mkenvimage-objs := mkenvimage.o os_support.o lib/crc32.o
hostprogs-y += dumpimage mkimage
tools: Use a single target-independent config to enable OpenSSL Host tool features, such as mkimage's ability to sign FIT images were enabled or disabled based on the target configuration. However, this misses the point of a target-agnostic host tool. A target's ability to verify FIT signatures is independent of mkimage's ability to create those signatures. In fact, u-boot's build system doesn't sign images. The target code can be successfully built without relying on any ability to sign such code. Conversely, mkimage's ability to sign images does not require that those images will only work on targets which support FIT verification. Linking mkimage cryptographic features to target support for FIT verification is misguided. Without loss of generality, we can say that host features are and should be independent of target features. While we prefer that a host tool always supports the same feature set, we recognize the following - some users prefer to build u-boot without a dependency on OpenSSL. - some distros prefer to ship mkimage without linking to OpenSSL To allow these use cases, introduce a host-only Kconfig which is used to select or deselect libcrypto support. Some mkimage features or some host tools might not be available, but this shouldn't affect the u-boot build. I also considered setting the default of this config based on FIT_SIGNATURE. While it would preserve the old behaviour it's also contrary to the goals of this change. I decided to enable it by default, so that the default build yields the most feature-complete mkimage. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-14 22:05:47 +00:00
hostprogs-$(CONFIG_TOOLS_LIBCRYPTO) += fit_info fit_check_sign
hostprogs-$(CONFIG_CMD_BOOTEFI_SELFTEST) += file2include
FIT_OBJS-y := fit_common.o fit_image.o image-host.o boot/image-fit.o
FIT_SIG_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := image-sig-host.o boot/image-fit-sig.o
FIT_CIPHER_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := boot/image-cipher.o
# The following files are synced with upstream DTC.
# Use synced versions from scripts/dtc/libfdt/.
LIBFDT_OBJS := $(addprefix libfdt/, fdt.o fdt_ro.o fdt_wip.o fdt_sw.o fdt_rw.o \
fdt_strerror.o fdt_empty_tree.o fdt_addresses.o fdt_overlay.o)
tools: Use a single target-independent config to enable OpenSSL Host tool features, such as mkimage's ability to sign FIT images were enabled or disabled based on the target configuration. However, this misses the point of a target-agnostic host tool. A target's ability to verify FIT signatures is independent of mkimage's ability to create those signatures. In fact, u-boot's build system doesn't sign images. The target code can be successfully built without relying on any ability to sign such code. Conversely, mkimage's ability to sign images does not require that those images will only work on targets which support FIT verification. Linking mkimage cryptographic features to target support for FIT verification is misguided. Without loss of generality, we can say that host features are and should be independent of target features. While we prefer that a host tool always supports the same feature set, we recognize the following - some users prefer to build u-boot without a dependency on OpenSSL. - some distros prefer to ship mkimage without linking to OpenSSL To allow these use cases, introduce a host-only Kconfig which is used to select or deselect libcrypto support. Some mkimage features or some host tools might not be available, but this shouldn't affect the u-boot build. I also considered setting the default of this config based on FIT_SIGNATURE. While it would preserve the old behaviour it's also contrary to the goals of this change. I decided to enable it by default, so that the default build yields the most feature-complete mkimage. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-14 22:05:47 +00:00
RSA_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := $(addprefix lib/rsa/, \
rsa-sign.o rsa-verify.o \
rsa-mod-exp.o)
tools: Use a single target-independent config to enable OpenSSL Host tool features, such as mkimage's ability to sign FIT images were enabled or disabled based on the target configuration. However, this misses the point of a target-agnostic host tool. A target's ability to verify FIT signatures is independent of mkimage's ability to create those signatures. In fact, u-boot's build system doesn't sign images. The target code can be successfully built without relying on any ability to sign such code. Conversely, mkimage's ability to sign images does not require that those images will only work on targets which support FIT verification. Linking mkimage cryptographic features to target support for FIT verification is misguided. Without loss of generality, we can say that host features are and should be independent of target features. While we prefer that a host tool always supports the same feature set, we recognize the following - some users prefer to build u-boot without a dependency on OpenSSL. - some distros prefer to ship mkimage without linking to OpenSSL To allow these use cases, introduce a host-only Kconfig which is used to select or deselect libcrypto support. Some mkimage features or some host tools might not be available, but this shouldn't affect the u-boot build. I also considered setting the default of this config based on FIT_SIGNATURE. While it would preserve the old behaviour it's also contrary to the goals of this change. I decided to enable it by default, so that the default build yields the most feature-complete mkimage. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-14 22:05:47 +00:00
ECDSA_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := $(addprefix lib/ecdsa/, ecdsa-libcrypto.o)
tools: Use a single target-independent config to enable OpenSSL Host tool features, such as mkimage's ability to sign FIT images were enabled or disabled based on the target configuration. However, this misses the point of a target-agnostic host tool. A target's ability to verify FIT signatures is independent of mkimage's ability to create those signatures. In fact, u-boot's build system doesn't sign images. The target code can be successfully built without relying on any ability to sign such code. Conversely, mkimage's ability to sign images does not require that those images will only work on targets which support FIT verification. Linking mkimage cryptographic features to target support for FIT verification is misguided. Without loss of generality, we can say that host features are and should be independent of target features. While we prefer that a host tool always supports the same feature set, we recognize the following - some users prefer to build u-boot without a dependency on OpenSSL. - some distros prefer to ship mkimage without linking to OpenSSL To allow these use cases, introduce a host-only Kconfig which is used to select or deselect libcrypto support. Some mkimage features or some host tools might not be available, but this shouldn't affect the u-boot build. I also considered setting the default of this config based on FIT_SIGNATURE. While it would preserve the old behaviour it's also contrary to the goals of this change. I decided to enable it by default, so that the default build yields the most feature-complete mkimage. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-14 22:05:47 +00:00
AES_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := $(addprefix lib/aes/, \
aes-encrypt.o aes-decrypt.o)
# Cryptographic helpers that depend on openssl/libcrypto
tools: Use a single target-independent config to enable OpenSSL Host tool features, such as mkimage's ability to sign FIT images were enabled or disabled based on the target configuration. However, this misses the point of a target-agnostic host tool. A target's ability to verify FIT signatures is independent of mkimage's ability to create those signatures. In fact, u-boot's build system doesn't sign images. The target code can be successfully built without relying on any ability to sign such code. Conversely, mkimage's ability to sign images does not require that those images will only work on targets which support FIT verification. Linking mkimage cryptographic features to target support for FIT verification is misguided. Without loss of generality, we can say that host features are and should be independent of target features. While we prefer that a host tool always supports the same feature set, we recognize the following - some users prefer to build u-boot without a dependency on OpenSSL. - some distros prefer to ship mkimage without linking to OpenSSL To allow these use cases, introduce a host-only Kconfig which is used to select or deselect libcrypto support. Some mkimage features or some host tools might not be available, but this shouldn't affect the u-boot build. I also considered setting the default of this config based on FIT_SIGNATURE. While it would preserve the old behaviour it's also contrary to the goals of this change. I decided to enable it by default, so that the default build yields the most feature-complete mkimage. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-14 22:05:47 +00:00
LIBCRYPTO_OBJS-$(CONFIG_TOOLS_LIBCRYPTO) := $(addprefix lib/, \
fdt-libcrypto.o)
ROCKCHIP_OBS = lib/rc4.o rkcommon.o rkimage.o rksd.o rkspi.o
# common objs for dumpimage and mkimage
dumpimage-mkimage-objs := aisimage.o \
atmelimage.o \
$(FIT_OBJS-y) \
$(FIT_SIG_OBJS-y) \
$(FIT_CIPHER_OBJS-y) \
boot/fdt_region.o \
boot/bootm.o \
lib/crc32.o \
default_image.o \
lib/fdtdec_common.o \
lib/fdtdec.o \
boot/image.o \
boot/image-host.o \
imagetool.o \
imximage.o \
imx8image.o \
imx8mimage.o \
kwbimage.o \
lib/md5.o \
lpc32xximage.o \
mxsimage.o \
omapimage.o \
os_support.o \
pblimage.o \
pbl_crc32.o \
vybridimage.o \
stm32image.o \
$(ROCKCHIP_OBS) \
socfpgaimage.o \
sunxi_egon.o \
lib/crc16.o \
lib/hash-checksum.o \
lib/sha1.o \
lib/sha256.o \
lib/sha512.o \
common/hash.o \
ublimage.o \
zynqimage.o \
zynqmpimage.o \
zynqmpbif.o \
$(LIBCRYPTO_OBJS-y) \
$(LIBFDT_OBJS) \
gpimage.o \
gpimage-common.o \
mtk_image.o \
$(ECDSA_OBJS-y) \
$(RSA_OBJS-y) \
$(AES_OBJS-y)
dumpimage-objs := $(dumpimage-mkimage-objs) dumpimage.o
mkimage-objs := $(dumpimage-mkimage-objs) mkimage.o
fit_info-objs := $(dumpimage-mkimage-objs) fit_info.o
fit_check_sign-objs := $(dumpimage-mkimage-objs) fit_check_sign.o
file2include-objs := file2include.o
tools: Use a single target-independent config to enable OpenSSL Host tool features, such as mkimage's ability to sign FIT images were enabled or disabled based on the target configuration. However, this misses the point of a target-agnostic host tool. A target's ability to verify FIT signatures is independent of mkimage's ability to create those signatures. In fact, u-boot's build system doesn't sign images. The target code can be successfully built without relying on any ability to sign such code. Conversely, mkimage's ability to sign images does not require that those images will only work on targets which support FIT verification. Linking mkimage cryptographic features to target support for FIT verification is misguided. Without loss of generality, we can say that host features are and should be independent of target features. While we prefer that a host tool always supports the same feature set, we recognize the following - some users prefer to build u-boot without a dependency on OpenSSL. - some distros prefer to ship mkimage without linking to OpenSSL To allow these use cases, introduce a host-only Kconfig which is used to select or deselect libcrypto support. Some mkimage features or some host tools might not be available, but this shouldn't affect the u-boot build. I also considered setting the default of this config based on FIT_SIGNATURE. While it would preserve the old behaviour it's also contrary to the goals of this change. I decided to enable it by default, so that the default build yields the most feature-complete mkimage. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-14 22:05:47 +00:00
ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_TOOLS_LIBCRYPTO),)
# Add CONFIG_MXS into host CFLAGS, so we can check whether or not register
# the mxsimage support within tools/mxsimage.c .
HOSTCFLAGS_mxsimage.o += -DCONFIG_MXS
endif
tools: Use a single target-independent config to enable OpenSSL Host tool features, such as mkimage's ability to sign FIT images were enabled or disabled based on the target configuration. However, this misses the point of a target-agnostic host tool. A target's ability to verify FIT signatures is independent of mkimage's ability to create those signatures. In fact, u-boot's build system doesn't sign images. The target code can be successfully built without relying on any ability to sign such code. Conversely, mkimage's ability to sign images does not require that those images will only work on targets which support FIT verification. Linking mkimage cryptographic features to target support for FIT verification is misguided. Without loss of generality, we can say that host features are and should be independent of target features. While we prefer that a host tool always supports the same feature set, we recognize the following - some users prefer to build u-boot without a dependency on OpenSSL. - some distros prefer to ship mkimage without linking to OpenSSL To allow these use cases, introduce a host-only Kconfig which is used to select or deselect libcrypto support. Some mkimage features or some host tools might not be available, but this shouldn't affect the u-boot build. I also considered setting the default of this config based on FIT_SIGNATURE. While it would preserve the old behaviour it's also contrary to the goals of this change. I decided to enable it by default, so that the default build yields the most feature-complete mkimage. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-14 22:05:47 +00:00
ifdef CONFIG_TOOLS_LIBCRYPTO
# This affects include/image.h, but including the board config file
# is tricky, so manually define this options here.
HOST_EXTRACFLAGS += -DCONFIG_FIT_SIGNATURE
tools: Use a single target-independent config to enable OpenSSL Host tool features, such as mkimage's ability to sign FIT images were enabled or disabled based on the target configuration. However, this misses the point of a target-agnostic host tool. A target's ability to verify FIT signatures is independent of mkimage's ability to create those signatures. In fact, u-boot's build system doesn't sign images. The target code can be successfully built without relying on any ability to sign such code. Conversely, mkimage's ability to sign images does not require that those images will only work on targets which support FIT verification. Linking mkimage cryptographic features to target support for FIT verification is misguided. Without loss of generality, we can say that host features are and should be independent of target features. While we prefer that a host tool always supports the same feature set, we recognize the following - some users prefer to build u-boot without a dependency on OpenSSL. - some distros prefer to ship mkimage without linking to OpenSSL To allow these use cases, introduce a host-only Kconfig which is used to select or deselect libcrypto support. Some mkimage features or some host tools might not be available, but this shouldn't affect the u-boot build. I also considered setting the default of this config based on FIT_SIGNATURE. While it would preserve the old behaviour it's also contrary to the goals of this change. I decided to enable it by default, so that the default build yields the most feature-complete mkimage. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-14 22:05:47 +00:00
HOST_EXTRACFLAGS += -DCONFIG_FIT_SIGNATURE_MAX_SIZE=0xffffffff
HOST_EXTRACFLAGS += -DCONFIG_FIT_CIPHER
endif
# MXSImage needs LibSSL
tools: Use a single target-independent config to enable OpenSSL Host tool features, such as mkimage's ability to sign FIT images were enabled or disabled based on the target configuration. However, this misses the point of a target-agnostic host tool. A target's ability to verify FIT signatures is independent of mkimage's ability to create those signatures. In fact, u-boot's build system doesn't sign images. The target code can be successfully built without relying on any ability to sign such code. Conversely, mkimage's ability to sign images does not require that those images will only work on targets which support FIT verification. Linking mkimage cryptographic features to target support for FIT verification is misguided. Without loss of generality, we can say that host features are and should be independent of target features. While we prefer that a host tool always supports the same feature set, we recognize the following - some users prefer to build u-boot without a dependency on OpenSSL. - some distros prefer to ship mkimage without linking to OpenSSL To allow these use cases, introduce a host-only Kconfig which is used to select or deselect libcrypto support. Some mkimage features or some host tools might not be available, but this shouldn't affect the u-boot build. I also considered setting the default of this config based on FIT_SIGNATURE. While it would preserve the old behaviour it's also contrary to the goals of this change. I decided to enable it by default, so that the default build yields the most feature-complete mkimage. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-14 22:05:47 +00:00
ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_ARMADA_38X)$(CONFIG_TOOLS_LIBCRYPTO),)
HOSTCFLAGS_kwbimage.o += \
$(shell pkg-config --cflags libssl libcrypto 2> /dev/null || echo "")
kconfig / kbuild: Re-sync with Linux 4.19 Align Kconfig and Kbuild logic to Linux 4.19 release with minimal impact on files outside of this scope. Our previous Kconfig sync was done by commit 5972ff077e0f ("kconfig / kbuild: re-sync with Linux 4.18"). In this particular re-sync in order to keep clang support working a number of related changes needed to be pulled in that had been missed previously. Not all of these changes we easily traceable and so have been omitted from the list below. The imported Linux commits are: [From prior to v4.18] 9f3f1fd29976 kbuild: Add __cc-option macro d7f14c66c273 kbuild: Enable Large File Support for hostprogs 6d79a7b424a5 kbuild: suppress warnings from 'getconf LFS_*' 24403874316a Shared library support 86a9df597cdd kbuild: fix linker feature test macros when cross compiling with Clang 0294e6f4a000 kbuild: simplify ld-option implementation [From v4.18 to v4.19] 96f14fe738b6 kbuild: Rename HOSTCFLAGS to KBUILD_HOSTCFLAGS 10844aebf448 kbuild: Rename HOSTCXXFLAGS to KBUILD_HOSTCXXFLAGS b90a368000ab kbuild: Rename HOSTLDFLAGS to KBUILD_HOSTLDFLAGS 8377bd2b9ee1 kbuild: Rename HOST_LOADLIBES to KBUILD_HOSTLDLIBS f92d19e0ef9b kbuild: Use HOST*FLAGS options from the command line 4ab3b80159d4 kconfig: check for pkg-config on make {menu,n,g,x}config 693359f7ac90 kconfig: rename SYMBOL_AUTO to SYMBOL_NO_WRITE f60b992e30ff kbuild: replace $(LDFLAGS) $(ldflags-y) with $(ld_flags) 2fb9279f2c3e kbuild: change ld_flags to contain LDFLAGS_$(@F) c931d34ea085 arm64: build with baremetal linker target instead of Linux when available 5accd7f3360e kconfig: handle format string before calling conf_message_callback() a2ff4040151a kconfig: rename file_write_dep and move it to confdata.c 0608182ad542 kconfig: split out useful helpers in confdata.c adc18acf42a1 kconfig: remove unneeded directory generation from local*config 79123b1389cc kconfig: create directories needed for syncconfig by itself 16952b77d8b5 kconfig: make syncconfig update .config regardless of sym_change_count d6c6ab93e17f kbuild: remove deprecated host-progs variable 56869d45e364 kconfig: fix the rule of mainmenu_stmt symbol c151272d1687 kconfig: remove unused sym_get_env_prop() function 1880861226c1 kconfig: remove P_ENV property type e3fd9b5384f3 scripts/dtc: consolidate include path options in Makefile 4bf6a9af0e91 kconfig: add build-only configurator targets f1575595d156 kconfig: error out when seeing recursive dependency 5e8c5299d315 kconfig: report recursive dependency involving 'imply' f498926c47aa kconfig: improve the recursive dependency report 98a4afbfafd2 kconfig: fix "Can't open ..." in parallel build 9a9ddcf47831 kconfig: suppress "configuration written to .config" for syncconfig 87a32e624037 kbuild: pass LDFLAGS to recordmcount.pl d503ac531a52 kbuild: rename LDFLAGS to KBUILD_LDFLAGS 217c3e019675 disable stringop truncation warnings for now bc8d2e20a3eb kconfig: remove a spurious self-assignment fd65465b7016 kconfig: do not require pkg-config on make {menu,n}config 5a4630aadb9a ftrace: Build with CPPFLAGS to get -Qunused-arguments Note that this adds new cleanup work to do in that we should adapt the shared library support we have to what is now upstream. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-27 15:46:27 +00:00
HOSTLDLIBS_mkimage += \
$(shell pkg-config --libs libssl libcrypto 2> /dev/null || echo "-lssl -lcrypto")
# OS X deprecate openssl in favour of CommonCrypto, supress deprecation
# warnings on those systems
ifeq ($(HOSTOS),darwin)
HOSTCFLAGS_mxsimage.o += -Wno-deprecated-declarations
HOSTCFLAGS_image-sig.o += -Wno-deprecated-declarations
HOSTCFLAGS_rsa-sign.o += -Wno-deprecated-declarations
endif
endif
HOSTCFLAGS_fit_image.o += -DMKIMAGE_DTC=\"$(CONFIG_MKIMAGE_DTC_PATH)\"
kconfig / kbuild: Re-sync with Linux 4.19 Align Kconfig and Kbuild logic to Linux 4.19 release with minimal impact on files outside of this scope. Our previous Kconfig sync was done by commit 5972ff077e0f ("kconfig / kbuild: re-sync with Linux 4.18"). In this particular re-sync in order to keep clang support working a number of related changes needed to be pulled in that had been missed previously. Not all of these changes we easily traceable and so have been omitted from the list below. The imported Linux commits are: [From prior to v4.18] 9f3f1fd29976 kbuild: Add __cc-option macro d7f14c66c273 kbuild: Enable Large File Support for hostprogs 6d79a7b424a5 kbuild: suppress warnings from 'getconf LFS_*' 24403874316a Shared library support 86a9df597cdd kbuild: fix linker feature test macros when cross compiling with Clang 0294e6f4a000 kbuild: simplify ld-option implementation [From v4.18 to v4.19] 96f14fe738b6 kbuild: Rename HOSTCFLAGS to KBUILD_HOSTCFLAGS 10844aebf448 kbuild: Rename HOSTCXXFLAGS to KBUILD_HOSTCXXFLAGS b90a368000ab kbuild: Rename HOSTLDFLAGS to KBUILD_HOSTLDFLAGS 8377bd2b9ee1 kbuild: Rename HOST_LOADLIBES to KBUILD_HOSTLDLIBS f92d19e0ef9b kbuild: Use HOST*FLAGS options from the command line 4ab3b80159d4 kconfig: check for pkg-config on make {menu,n,g,x}config 693359f7ac90 kconfig: rename SYMBOL_AUTO to SYMBOL_NO_WRITE f60b992e30ff kbuild: replace $(LDFLAGS) $(ldflags-y) with $(ld_flags) 2fb9279f2c3e kbuild: change ld_flags to contain LDFLAGS_$(@F) c931d34ea085 arm64: build with baremetal linker target instead of Linux when available 5accd7f3360e kconfig: handle format string before calling conf_message_callback() a2ff4040151a kconfig: rename file_write_dep and move it to confdata.c 0608182ad542 kconfig: split out useful helpers in confdata.c adc18acf42a1 kconfig: remove unneeded directory generation from local*config 79123b1389cc kconfig: create directories needed for syncconfig by itself 16952b77d8b5 kconfig: make syncconfig update .config regardless of sym_change_count d6c6ab93e17f kbuild: remove deprecated host-progs variable 56869d45e364 kconfig: fix the rule of mainmenu_stmt symbol c151272d1687 kconfig: remove unused sym_get_env_prop() function 1880861226c1 kconfig: remove P_ENV property type e3fd9b5384f3 scripts/dtc: consolidate include path options in Makefile 4bf6a9af0e91 kconfig: add build-only configurator targets f1575595d156 kconfig: error out when seeing recursive dependency 5e8c5299d315 kconfig: report recursive dependency involving 'imply' f498926c47aa kconfig: improve the recursive dependency report 98a4afbfafd2 kconfig: fix "Can't open ..." in parallel build 9a9ddcf47831 kconfig: suppress "configuration written to .config" for syncconfig 87a32e624037 kbuild: pass LDFLAGS to recordmcount.pl d503ac531a52 kbuild: rename LDFLAGS to KBUILD_LDFLAGS 217c3e019675 disable stringop truncation warnings for now bc8d2e20a3eb kconfig: remove a spurious self-assignment fd65465b7016 kconfig: do not require pkg-config on make {menu,n}config 5a4630aadb9a ftrace: Build with CPPFLAGS to get -Qunused-arguments Note that this adds new cleanup work to do in that we should adapt the shared library support we have to what is now upstream. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-27 15:46:27 +00:00
HOSTLDLIBS_dumpimage := $(HOSTLDLIBS_mkimage)
HOSTLDLIBS_fit_info := $(HOSTLDLIBS_mkimage)
HOSTLDLIBS_fit_check_sign := $(HOSTLDLIBS_mkimage)
hostprogs-$(CONFIG_EXYNOS5250) += mkexynosspl
hostprogs-$(CONFIG_EXYNOS5420) += mkexynosspl
HOSTCFLAGS_mkexynosspl.o := -pedantic
ifdtool-objs := $(LIBFDT_OBJS) ifdtool.o
hostprogs-$(CONFIG_X86) += ifdtool
ifwitool-objs := ifwitool.o
hostprogs-$(CONFIG_X86)$(CONFIG_SANDBOX) += ifwitool
hostprogs-$(CONFIG_MX23) += mxsboot
hostprogs-$(CONFIG_MX28) += mxsboot
HOSTCFLAGS_mxsboot.o := -pedantic
hostprogs-$(CONFIG_ARCH_SUNXI) += mksunxiboot
hostprogs-$(CONFIG_ARCH_SUNXI) += sunxi-spl-image-builder
sunxi-spl-image-builder-objs := sunxi-spl-image-builder.o lib/bch.o
hostprogs-$(CONFIG_NETCONSOLE) += ncb
hostprogs-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1
ubsha1-objs := os_support.o ubsha1.o lib/sha1.o
HOSTCFLAGS_ubsha1.o := -pedantic
hostprogs-$(CONFIG_ARCH_KIRKWOOD) += kwboot
hostprogs-$(CONFIG_ARCH_MVEBU) += kwboot
hostprogs-y += proftool
hostprogs-$(CONFIG_STATIC_RELA) += relocate-rela
hostprogs-$(CONFIG_RISCV) += prelink-riscv
hostprogs-$(CONFIG_ARCH_OCTEON) += update_octeon_header
update_octeon_header-objs := update_octeon_header.o lib/crc32.o
hostprogs-y += fdtgrep
fdtgrep-objs += $(LIBFDT_OBJS) boot/fdt_region.o fdtgrep.o
ifneq ($(TOOLS_ONLY),y)
hostprogs-y += spl_size_limit
endif
MIPS: Stop building position independent code U-Boot has up until now built with -fpic for the MIPS architecture, producing position independent code which uses indirection through a global offset table, making relocation fairly straightforward as it simply involves patching up GOT entries. Using -fpic does however have some downsides. The biggest of these is that generated code is bloated in various ways. For example, function calls are indirected through the GOT & the t9 register: 8f998064 lw t9,-32668(gp) 0320f809 jalr t9 Without -fpic the call is simply: 0f803f01 jal be00fc04 <puts> This is more compact & faster (due to the lack of the load & the dependency the jump has on its result). It is also easier to read & debug because the disassembly shows what function is being called, rather than just an offset from gp which would then have to be looked up in the ELF to discover the target function. Another disadvantage of -fpic is that each function begins with a sequence to calculate the value of the gp register, for example: 3c1c0004 lui gp,0x4 279c3384 addiu gp,gp,13188 0399e021 addu gp,gp,t9 Without using -fpic this sequence no longer appears at the start of each function, reducing code size considerably. This patch switches U-Boot from building with -fpic to building with -fno-pic, in order to gain the benefits described above. The cost of this is an extra step during the build process to extract relocation data from the ELF & write it into a new .rel section in a compact format, plus the added complexity of dealing with multiple types of relocation rather than the single type that applied to the GOT. The benefit is smaller, cleaner, more debuggable code. The relocate_code() function is reimplemented in C to handle the new relocation scheme, which also makes it easier to read & debug. Taking maltael_defconfig as an example the size of u-boot.bin built using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils 2.24.90) shrinks from 254KiB to 224KiB. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: u-boot@lists.denx.de Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-06-19 18:53:47 +00:00
hostprogs-$(CONFIG_MIPS) += mips-relocs
hostprogs-$(CONFIG_ASN1_COMPILER) += asn1_compiler
HOSTCFLAGS_asn1_compiler.o = -idirafter $(srctree)/include
HOSTLDLIBS_mkeficapsule += -lgnutls
hostprogs-$(CONFIG_TOOLS_MKEFICAPSULE) += mkeficapsule
# We build some files with extra pedantic flags to try to minimize things
# that won't build on some weird host compiler -- though there are lots of
# exceptions for files that aren't complaint.
HOSTCFLAGS_crc32.o := -pedantic
HOSTCFLAGS_crc8.o := -pedantic
HOSTCFLAGS_md5.o := -pedantic
HOSTCFLAGS_sha1.o := -pedantic
HOSTCFLAGS_sha256.o := -pedantic
HOSTCFLAGS_sha512.o := -pedantic -DCONFIG_SHA512 -DCONFIG_SHA384
quiet_cmd_wrap = WRAP $@
kbuild: sync top Makefile with Linux 3.18-rc1 Since Linux 3.15, relative path feature and related fixes, cleanups have been merged to the top Makefile. The relative path feature looks stable enough, so let's import it to U-Boot along with various cleanups. Commits imported from Linux (some need adjustment) are: [1] commit 7e1c04779efd by Michal Marek kbuild: Use relative path for $(objtree) [2] commit 890676c65d69 by Michal Marek kbuild: Use relative path when building in the source tree [3] commit 9da0763bdd82 by Michal Marek kbuild: Use relative path when building in a subdir of the source tree [4] commit c2e28dc975ea by Michal Marek kbuild: Print the name of the build directory [5] commit 066b7ed95580 by Michal Marek kbuild: Do not print the build directory with make -s [6] commit 3f1d9a6cec01 by Michal Marek kbuild: make -s should be used with kernelrelease/kernelversion/image_name [7] commit 7ff525712acf by Masahiro Yamada kbuild: fake the "Entering directory ..." message more simply [8] commit 745a254322c8 by Masahiro Yamada kbuild: use $(Q) for sub-make target [9] commit aa55c8e2f7a3 by Masahiro Yamada kbuild: handle C=... and M=... after entering into build directory [10] commit ab7474ea5361 by Borislav Petkov Kbuild: Ignore GREP_OPTIONS env variable To use relative path feature, tools/Makefile and scripts/Makefile.autoconf must be tweaked. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-30 02:06:11 +00:00
cmd_wrap = echo "\#include <../$(patsubst $(obj)/%,%,$@)>" >$@
$(obj)/boot/%.c $(obj)/common/%.c $(obj)/env/%.c $(obj)/lib/%.c:
$(call cmd,wrap)
clean-dirs := lib common
always := $(hostprogs-y)
# Generated LCD/video logo
LOGO_H = $(objtree)/include/bmp_logo.h
LOGO_DATA_H = $(objtree)/include/bmp_logo_data.h
LOGO-$(CONFIG_LCD_LOGO) += $(LOGO_H)
LOGO-$(CONFIG_LCD_LOGO) += $(LOGO_DATA_H)
LOGO-$(CONFIG_VIDEO_LOGO) += $(LOGO_H)
LOGO-$(CONFIG_VIDEO_LOGO) += $(LOGO_DATA_H)
# Generic logo
ifeq ($(LOGO_BMP),)
LOGO_BMP= $(srctree)/$(src)/logos/denx.bmp
# Use board logo and fallback to vendor
ifneq ($(wildcard $(srctree)/$(src)/logos/$(BOARD).bmp),)
LOGO_BMP= $(srctree)/$(src)/logos/$(BOARD).bmp
else
ifneq ($(wildcard $(srctree)/$(src)/logos/$(VENDOR).bmp),)
LOGO_BMP= $(srctree)/$(src)/logos/$(VENDOR).bmp
endif
endif
endif # !LOGO_BMP
2002-07-20 20:14:13 +00:00
#
# Use native tools and options
# Define __KERNEL_STRICT_NAMES to prevent typedef overlaps
# Define _GNU_SOURCE to obtain the getline prototype from stdio.h
2002-07-20 20:14:13 +00:00
#
HOST_EXTRACFLAGS += -include $(srctree)/include/compiler.h \
kconfig: switch to Kconfig This commit enables Kconfig. Going forward, we use Kconfig for the board configuration. mkconfig will never be used. Nor will include/config.mk be generated. Kconfig must be adjusted for U-Boot because our situation is a little more complicated than Linux Kernel. We have to generate multiple boot images (Normal, SPL, TPL) from one source tree. Each image needs its own configuration input. Usage: Run "make <board>_defconfig" to do the board configuration. It will create the .config file and additionally spl/.config, tpl/.config if SPL, TPL is enabled, respectively. You can use "make config", "make menuconfig" etc. to create a new .config or modify the existing one. Use "make spl/config", "make spl/menuconfig" etc. for spl/.config and do likewise for tpl/.config file. The generic syntax of configuration targets for SPL, TPL is: <target_image>/<config_command> Here, <target_image> is either 'spl' or 'tpl' <config_command> is 'config', 'menuconfig', 'xconfig', etc. When the configuration is done, run "make". (Or "make <board>_defconfig all" will do the configuration and build in one time.) For futher information of how Kconfig works in U-Boot, please read the comment block of scripts/multiconfig.py. By the way, there is another item worth remarking here: coexistence of Kconfig and board herder files. Prior to Kconfig, we used C headers to define a set of configs. We expect a very long term to migrate from C headers to Kconfig. Two different infractructure must coexist in the interim. In our former configuration scheme, include/autoconf.mk was generated for use in makefiles. It is still generated under include/, spl/include/, tpl/include/ directory for the Normal, SPL, TPL image, respectively. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:17 +00:00
$(patsubst -I%,-idirafter%, $(filter -I%, $(UBOOTINCLUDE))) \
-I$(srctree)/scripts/dtc/libfdt \
-I$(srctree)/tools \
-DUSE_HOSTCC \
-D__KERNEL_STRICT_NAMES \
-D_GNU_SOURCE
__build: $(LOGO-y)
2002-07-20 20:14:13 +00:00
$(LOGO_H): $(obj)/bmp_logo $(LOGO_BMP)
$(obj)/bmp_logo --gen-info $(LOGO_BMP) > $@
ifeq ($(CONFIG_DM_VIDEO),y)
$(LOGO_DATA_H): $(obj)/bmp_logo $(LOGO_BMP)
$(obj)/bmp_logo --gen-bmp $(LOGO_BMP) > $@
else
$(LOGO_DATA_H): $(obj)/bmp_logo $(LOGO_BMP)
$(obj)/bmp_logo --gen-data $(LOGO_BMP) > $@
#endif
endif
# Let clean descend into subdirs
subdir- += env
ifneq ($(CROSS_BUILD_TOOLS),)
override HOSTCC = $(CC)
override HOSTCFLAGS = $(CFLAGS)
quiet_cmd_crosstools_strip = STRIP $^
cmd_crosstools_strip = $(STRIP) $^; touch $@
$(obj)/.strip: $(call objectify,$(filter $(always),$(hostprogs-y)))
$(call cmd,crosstools_strip)
always += .strip
endif
clean-files += .strip