u-boot/arch/arm/mach-imx/mx6/Kconfig

749 lines
14 KiB
Text
Raw Normal View History

if ARCH_MX6
config MX6_SMP
bool
select ARM_ERRATA_751472
select ARM_ERRATA_761320
select ARM_ERRATA_794072
select ARM_ERRATA_845369
select MP
config MX6
bool
default y
select ARM_ERRATA_743622 if !MX6UL && !MX6ULL
select GPT_TIMER if !MX6UL && !MX6ULL
imply CMD_FUSE
config MX6D
bool
select HAS_CAAM
select MX6_SMP
config MX6DL
bool
select HAS_CAAM
select MX6_SMP
config MX6Q
bool
select HAS_CAAM
select MX6_SMP
config MX6QDL
bool
select HAS_CAAM
select MX6_SMP
config MX6S
bool
select HAS_CAAM
config MX6SL
bool
config MX6SX
bool
select HAS_CAAM
select ROM_UNIFIED_SECTIONS
config MX6SLL
bool
select ROM_UNIFIED_SECTIONS
config MX6UL
bool
select HAS_CAAM
select ROM_UNIFIED_SECTIONS
select SYSCOUNTER_TIMER
select SYS_L2CACHE_OFF
config MX6UL_LITESOM
bool
select DM
select DM_THERMAL
select MX6UL
select SUPPORT_SPL
imply CMD_DM
config MX6UL_OPOS6UL
bool
select BOARD_LATE_INIT
select DM
select DM_GPIO
select DM_MMC
select DM_THERMAL
select MX6UL
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
select SPL_PINCTRL if SPL
select SPL_SEPARATE_BSS if SPL
select SUPPORT_SPL
imply CMD_DM
config MX6ULL
bool
select ROM_UNIFIED_SECTIONS
select SYSCOUNTER_TIMER
select SYS_L2CACHE_OFF
config MX6_OCRAM_256KB
bool "Support 256KB OCRAM"
depends on MX6D || MX6Q
help
Allows using the full 256KB size of the OCRAM on the MX6Q/MX6D series
of chips, such as for SPL. The OCRAM of the Lite series of chips is
only 128KB, so using this option will prevent the resulting code from
working on those chips.
config MX6_DDRCAL
bool "Include dynamic DDR calibration routines"
depends on SPL
default n
help
Say "Y" if your board uses dynamic (per-boot) DDR calibration.
If unsure, say N.
choice
prompt "MX6 board select"
optional
config TARGET_ADVANTECH_DMS_BA16
bool "Advantech dms-ba16"
select BOARD_LATE_INIT
select MX6Q
imply CMD_SATA
config TARGET_APALIS_IMX6
bool "Toradex Apalis iMX6 board"
select BOARD_LATE_INIT
select MX6Q
select DM
select DM_SERIAL
select DM_THERMAL
select SUPPORT_SPL
imply CMD_DM
imply CMD_SATA
config TARGET_ARISTAINETOS2
bool "aristainetos2"
select BOARD_LATE_INIT
select MX6DL
select SYS_I2C_MXC
select MXC_UART
select FEC_MXC
select DM
imply CMD_SATA
imply CMD_DM
config TARGET_ARISTAINETOS2B
bool "Support aristainetos2-revB"
select BOARD_LATE_INIT
select MX6DL
select SYS_I2C_MXC
select MXC_UART
select FEC_MXC
select DM
imply CMD_SATA
imply CMD_DM
config TARGET_ARISTAINETOS2BCSL
bool "Support aristainetos2-revB CSL"
select BOARD_LATE_INIT
select MX6DL
select SYS_I2C_MXC
select MXC_UART
select FEC_MXC
select DM
imply CMD_SATA
imply CMD_DM
config TARGET_ARISTAINETOS2C
bool "Support aristainetos2-revC"
select BOARD_LATE_INIT
select MX6DL
select SYS_I2C_MXC
select MXC_UART
select FEC_MXC
select DM
imply CMD_SATA
imply CMD_DM
config TARGET_CGTQMX6EVAL
bool "cgtqmx6eval"
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select MX6QDL
select SUPPORT_SPL
imply CMD_DM
config TARGET_CM_FX6
bool "CM-FX6"
select BOARD_LATE_INIT
select DM
select DM_GPIO
select DM_SERIAL
select MX6QDL
select SUPPORT_SPL
imply CMD_DM
config TARGET_COLIBRI_IMX6
bool "Toradex Colibri iMX6 board"
select BOARD_LATE_INIT
select DM
select DM_SERIAL
select DM_THERMAL
select SUPPORT_SPL
imply CMD_DM
config TARGET_COLIBRI_IMX6ULL
bool "Toradex Colibri iMX6ULL"
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select MX6ULL
config TARGET_DART_6UL
bool "Variscite imx6ULL dart(DART-SOM-6ULL)"
select MX6ULL
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_SERIAL
select DM_THERMAL
select SUPPORT_SPL
config TARGET_DHCOMIMX6
bool "dh_imx6"
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select MX6QDL
select SUPPORT_SPL
imply CMD_DM
imply CMD_SPL
config TARGET_DISPLAY5
bool "LWN DISPLAY5 board"
select DM
select DM_ETH
select DM_I2C
select DM_MMC
select DM_SPI
select DM_GPIO
select DM_SERIAL
select SUPPORT_SPL
imply CMD_DM
config TARGET_EMBESTMX6BOARDS
bool "embestmx6boards"
select BOARD_LATE_INIT
select SUPPORT_SPL
config TARGET_GE_BX50V3
bool "General Electric Bx50v3"
select BOARD_LATE_INIT
select MX6Q
config TARGET_GW_VENTANA
bool "gw_ventana"
select MX6QDL
select SUPPORT_SPL
imply CMD_SATA
imply CMD_SPL
config TARGET_KOSAGI_NOVENA
bool "Kosagi Novena"
select BOARD_LATE_INIT
select DM_ETH
select DM_GPIO
select DM_MMC
select DM_PCI
select DM_SCSI
select DM_USB
select DM_VIDEO
select OF_CONTROL
select SUPPORT_SPL
imply CMD_DM
config TARGET_MCCMON6
bool "mccmon6"
select MX6QDL
select SUPPORT_SPL
select DM
select DM_GPIO
select DM_ETH
select DM_SERIAL
select DM_I2C
select DM_SPI
imply CMD_DM
config TARGET_MX6CUBOXI
bool "Solid-run mx6 boards"
select BOARD_LATE_INIT
select MX6QDL
select SUPPORT_SPL
config TARGET_MX6LOGICPD
bool "Logic PD i.MX6 SOM"
select MX6Q
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_PMIC
select OF_CONTROL
imply CMD_DM
config TARGET_MX6MEMCAL
bool "mx6memcal"
select SUPPORT_SPL
help
The mx6memcal board is a virtual board that can be used to validate
and characterize the memory layout of a new design during the initial
development and pre-production stages.
config TARGET_MX6QARM2
bool "mx6qarm2"
config TARGET_MX6DL_MAMOJ
bool "Support BTicino Mamoj"
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_PMIC
select DM_PMIC_PFUZE100
select DM_THERMAL
select MX6QDL
select OF_CONTROL
select PINCTRL
select SPL
select SPL_DM if SPL
select SPL_GPIO_SUPPORT if SPL
select SPL_LIBCOMMON_SUPPORT if SPL
select SPL_LIBDISK_SUPPORT if SPL
select SPL_LIBGENERIC_SUPPORT if SPL
select SPL_MMC_SUPPORT if SPL
select SPL_OF_CONTROL if SPL
select SPL_OF_LIBFDT if SPL
select SPL_PINCTRL if SPL
select SPL_SEPARATE_BSS if SPL
select SPL_SERIAL_SUPPORT if SPL
select SPL_USB_GADGET if SPL
select SPL_USB_HOST_SUPPORT if SPL
select SPL_USB_SDP_SUPPORT if SPL
select SPL_WATCHDOG_SUPPORT if SPL
select SUPPORT_SPL
imply CMD_DM
config TARGET_MX6Q_ENGICAM
bool "Support Engicam i.Core(RQS)"
select BOARD_LATE_INIT
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_THERMAL
select MX6QDL
select OF_CONTROL
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
select SPL_OF_LIBFDT
select SPL_PINCTRL if SPL
select SPL_SEPARATE_BSS if SPL
select SUPPORT_SPL
imply CMD_DM
config TARGET_MX6SABREAUTO
bool "mx6sabreauto"
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select MX6QDL
select SUPPORT_SPL
imply CMD_DM
config TARGET_MX6SABRESD
bool "mx6sabresd"
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select MX6QDL
select SUPPORT_SPL
imply CMD_DM
config TARGET_MX6SLEVK
bool "mx6slevk"
select MX6SL
select SUPPORT_SPL
config TARGET_MX6SLLEVK
bool "mx6sll evk"
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select MX6SLL
imply CMD_DM
config TARGET_MX6SXSABRESD
bool "mx6sxsabresd"
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select MX6SX
select SUPPORT_SPL
config TARGET_MX6SXSABREAUTO
bool "mx6sxsabreauto"
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select MX6SX
imply CMD_DM
imx: mx6ul: support mx6ul 9x9 evk board This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk, the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are: 1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC. 2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk supports 512MB DDR3 3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package. This patch add the following: 1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size() 2. Introduce a macro is_mx6ul_9x9_evk using CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work, so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with mx6ul_14x14_evk. And we have no way to dymaically checking this chip is 9x9 or 14x14. 3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations. POWER related configurations also effect for mx6ul_14x14_evk. But power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk. 4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM configurations. 5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file according to board_rev and board_name. 6. Add TARGET_MX6UL_9X9_EVK Kconfig entry Boot Log: U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53) reading u-boot.img reading u-boot.img U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 41C Reset cause: POR Board: MX6UL 9x9 EVK I2C: ready DRAM: 256 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: FEC1 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2015-09-06 07:02:34 +00:00
config TARGET_MX6UL_9X9_EVK
bool "mx6ul_9x9_evk"
select BOARD_LATE_INIT
imx: mx6ul: support mx6ul 9x9 evk board This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk, the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are: 1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC. 2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk supports 512MB DDR3 3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package. This patch add the following: 1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size() 2. Introduce a macro is_mx6ul_9x9_evk using CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work, so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with mx6ul_14x14_evk. And we have no way to dymaically checking this chip is 9x9 or 14x14. 3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations. POWER related configurations also effect for mx6ul_14x14_evk. But power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk. 4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM configurations. 5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file according to board_rev and board_name. 6. Add TARGET_MX6UL_9X9_EVK Kconfig entry Boot Log: U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53) reading u-boot.img reading u-boot.img U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 41C Reset cause: POR Board: MX6UL 9x9 EVK I2C: ready DRAM: 256 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: FEC1 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2015-09-06 07:02:34 +00:00
select DM
select DM_THERMAL
select MX6UL
imx: mx6ul: support mx6ul 9x9 evk board This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk, the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are: 1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC. 2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk supports 512MB DDR3 3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package. This patch add the following: 1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size() 2. Introduce a macro is_mx6ul_9x9_evk using CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work, so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with mx6ul_14x14_evk. And we have no way to dymaically checking this chip is 9x9 or 14x14. 3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations. POWER related configurations also effect for mx6ul_14x14_evk. But power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk. 4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM configurations. 5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file according to board_rev and board_name. 6. Add TARGET_MX6UL_9X9_EVK Kconfig entry Boot Log: U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53) reading u-boot.img reading u-boot.img U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 41C Reset cause: POR Board: MX6UL 9x9 EVK I2C: ready DRAM: 256 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: FEC1 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2015-09-06 07:02:34 +00:00
select SUPPORT_SPL
imply CMD_DM
imx: mx6ul: support mx6ul 9x9 evk board This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk, the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are: 1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC. 2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk supports 512MB DDR3 3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package. This patch add the following: 1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size() 2. Introduce a macro is_mx6ul_9x9_evk using CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work, so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with mx6ul_14x14_evk. And we have no way to dymaically checking this chip is 9x9 or 14x14. 3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations. POWER related configurations also effect for mx6ul_14x14_evk. But power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk. 4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM configurations. 5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file according to board_rev and board_name. 6. Add TARGET_MX6UL_9X9_EVK Kconfig entry Boot Log: U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53) reading u-boot.img reading u-boot.img U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 41C Reset cause: POR Board: MX6UL 9x9 EVK I2C: ready DRAM: 256 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: FEC1 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2015-09-06 07:02:34 +00:00
config TARGET_MX6UL_14X14_EVK
bool "mx6ul_14x14_evk"
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select MX6UL
select SUPPORT_SPL
imply CMD_DM
config TARGET_MX6UL_ENGICAM
bool "Support Engicam GEAM6UL/Is.IoT"
select BOARD_LATE_INIT
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_THERMAL
select MX6UL
select OF_CONTROL
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
select SPL_PINCTRL if SPL
select SPL_SEPARATE_BSS if SPL
select SUPPORT_SPL
imply CMD_DM
config TARGET_MX6ULL_14X14_EVK
bool "Support mx6ull_14x14_evk"
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select MX6ULL
imply CMD_DM
config TARGET_NITROGEN6X
bool "nitrogen6x"
imply USB_ETHER_ASIX
imply USB_ETHER_MCS7830
imply USB_ETHER_SMSC95XX
imply USB_HOST_ETHER
select MX6QDL
config TARGET_OPOS6ULDEV
bool "Armadeus OPOS6ULDev board"
select MX6UL_OPOS6UL
config TARGET_OT1200
bool "Bachmann OT1200"
select SUPPORT_SPL
imply CMD_SATA
config TARGET_PICO_IMX6
bool "PICO-IMX6"
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select MX6QDL
select SUPPORT_SPL
imply CMD_DM
config TARGET_PICO_IMX6UL
bool "PICO-IMX6UL-EMMC"
select MX6UL
select DM
select SUPPORT_SPL
imply CMD_DM
config TARGET_LITEBOARD
bool "Grinn liteBoard (i.MX6UL)"
select BOARD_LATE_INIT
select MX6UL_LITESOM
config TARGET_PLATINUM_PICON
bool "platinum-picon"
select SUPPORT_SPL
config TARGET_PLATINUM_TITANIUM
bool "platinum-titanium"
select SUPPORT_SPL
config TARGET_PCM058
bool "Phytec PCM058 i.MX6 Quad"
select BOARD_LATE_INIT
select SUPPORT_SPL
select MX6Q
select DM
select OF_CONTROL
imply CMD_DM
config TARGET_PFLA02
bool "Phytec PFLA02 (PhyFlex) i.MX6 Quad"
select BOARD_LATE_INIT
select MX6QDL
select SUPPORT_SPL
config TARGET_PCL063
bool "PHYTEC PCL063 (phyCORE-i.MX6UL)"
select MX6UL
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_SERIAL
select DM_THERMAL
select SUPPORT_SPL
config TARGET_PCL063_ULL
bool "PHYTEC PCL063 (phyCORE-i.MX6ULL)"
select MX6ULL
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_SERIAL
select DM_THERMAL
select SUPPORT_SPL
config TARGET_SECOMX6
bool "secomx6 boards"
config TARGET_SKSIMX6
bool "sks-imx6"
select SUPPORT_SPL
config TARGET_SOMLABS_VISIONSOM_6ULL
bool "visionsom-6ull"
select MX6ULL
select BOARD_LATE_INIT
select DM
select DM_ETH
select DM_GPIO
select DM_MMC
select DM_SERIAL
select DM_THERMAL
imply CMD_DM
config TARGET_TBS2910
bool "TBS2910 Matrix ARM mini PC"
config TARGET_TITANIUM
bool "titanium"
config TARGET_KP_IMX6Q_TPC
bool "K+P KP_IMX6Q_TPC i.MX6 Quad"
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select DM
select SPL_DM if SPL
select DM_THERMAL
select DM_MMC
select DM_ETH
select DM_REGULATOR
select SPL_DM_REGULATOR if SPL
select DM_SERIAL
select DM_I2C
select DM_GPIO
select DM_USB
select MX6QDL
select SUPPORT_SPL
select SPL_SEPARATE_BSS if SPL
imply CMD_DM
imply CMD_SPL
config TARGET_TQMA6
bool "TQ Systems TQMa6 board"
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select MXC_SPI
select SPI
imply DM
imply DM_GPIO
imply DM_MMC
imply DM_SPI
imply DM_SPI_FLASH
imply DM_I2C
imply CMD_SF
imply CMD_DM
config TARGET_UDOO
bool "udoo"
select BOARD_LATE_INIT
select MX6QDL
select SUPPORT_SPL
config TARGET_UDOO_NEO
bool "UDOO Neo"
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select MX6SX
select SUPPORT_SPL
imply CMD_DM
config TARGET_SOFTING_VINING_2000
bool "Softing VIN|ING 2000"
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select MX6SX
select SUPPORT_SPL
imply CMD_DM
config TARGET_WANDBOARD
bool "wandboard"
select BOARD_LATE_INIT
select MX6QDL
select SUPPORT_SPL
config TARGET_WARP
bool "WaRP"
select BOARD_LATE_INIT
select MX6SL
config TARGET_XPRESS
bool "CCV xPress"
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select MX6UL
select SUPPORT_SPL
imply CMD_DM
config TARGET_ZC5202
bool "zc5202"
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select SUPPORT_SPL
imply CMD_DM
config TARGET_ZC5601
bool "zc5601"
select BOARD_LATE_INIT
select DM
select DM_THERMAL
select SUPPORT_SPL
imply CMD_DM
config TARGET_BRPPT2
bool "brppt2"
select BOARD_LATE_INIT
select MX6QDL
select OF_CONTROL
select SPL_OF_LIBFDT
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select SUPPORT_SPL
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
help
Support
B&R BRPPT2 platform
based on Freescale's iMX6 SoC
endchoice
config SYS_SOC
default "mx6"
source "board/ge/bx50v3/Kconfig"
source "board/advantech/dms-ba16/Kconfig"
source "board/aristainetos/Kconfig"
source "board/armadeus/opos6uldev/Kconfig"
source "board/bachmann/ot1200/Kconfig"
source "board/barco/platinum/Kconfig"
source "board/barco/titanium/Kconfig"
source "board/boundary/nitrogen6x/Kconfig"
source "board/bticino/mamoj/Kconfig"
source "board/ccv/xpress/Kconfig"
source "board/compulab/cm_fx6/Kconfig"
source "board/congatec/cgtqmx6eval/Kconfig"
source "board/dhelectronics/dh_imx6/Kconfig"
source "board/el/el6x/Kconfig"
source "board/embest/mx6boards/Kconfig"
source "board/engicam/imx6q/Kconfig"
source "board/engicam/imx6ul/Kconfig"
source "board/freescale/mx6qarm2/Kconfig"
source "board/freescale/mx6memcal/Kconfig"
source "board/freescale/mx6sabreauto/Kconfig"
source "board/freescale/mx6sabresd/Kconfig"
source "board/freescale/mx6slevk/Kconfig"
source "board/freescale/mx6sllevk/Kconfig"
source "board/freescale/mx6sxsabresd/Kconfig"
source "board/freescale/mx6sxsabreauto/Kconfig"
source "board/freescale/mx6ul_14x14_evk/Kconfig"
source "board/freescale/mx6ullevk/Kconfig"
source "board/grinn/liteboard/Kconfig"
source "board/phytec/pcm058/Kconfig"
source "board/phytec/pfla02/Kconfig"
source "board/phytec/pcl063/Kconfig"
source "board/gateworks/gw_ventana/Kconfig"
source "board/kosagi/novena/Kconfig"
source "board/softing/vining_2000/Kconfig"
source "board/liebherr/display5/Kconfig"
source "board/liebherr/mccmon6/Kconfig"
source "board/logicpd/imx6/Kconfig"
source "board/seco/Kconfig"
source "board/sks-kinkel/sksimx6/Kconfig"
source "board/solidrun/mx6cuboxi/Kconfig"
source "board/somlabs/visionsom-6ull/Kconfig"
source "board/technexion/pico-imx6/Kconfig"
source "board/technexion/pico-imx6ul/Kconfig"
source "board/tbs/tbs2910/Kconfig"
source "board/tqc/tqma6/Kconfig"
source "board/toradex/apalis_imx6/Kconfig"
source "board/toradex/colibri_imx6/Kconfig"
source "board/toradex/colibri-imx6ull/Kconfig"
source "board/k+p/kp_imx6q_tpc/Kconfig"
source "board/udoo/Kconfig"
source "board/udoo/neo/Kconfig"
source "board/wandboard/Kconfig"
source "board/warp/Kconfig"
source "board/BuR/brppt2/Kconfig"
endif