2015-03-04 12:13:03 +00:00
|
|
|
if ARCH_MX6
|
|
|
|
|
|
|
|
|
|
config MX6
|
|
|
|
|
bool
|
|
|
|
|
default y
|
|
|
|
|
|
|
|
|
|
config MX6D
|
|
|
|
|
bool
|
|
|
|
|
|
|
|
|
|
config MX6DL
|
|
|
|
|
bool
|
|
|
|
|
|
|
|
|
|
config MX6Q
|
|
|
|
|
bool
|
|
|
|
|
|
|
|
|
|
config MX6QDL
|
|
|
|
|
bool
|
|
|
|
|
|
|
|
|
|
config MX6S
|
|
|
|
|
bool
|
|
|
|
|
|
|
|
|
|
config MX6SL
|
|
|
|
|
bool
|
|
|
|
|
|
|
|
|
|
config MX6SX
|
2015-10-12 18:48:09 +00:00
|
|
|
select ROM_UNIFIED_SECTIONS
|
2015-03-04 12:13:03 +00:00
|
|
|
bool
|
|
|
|
|
|
2015-07-20 11:28:28 +00:00
|
|
|
config MX6UL
|
|
|
|
|
select SYS_L2CACHE_OFF
|
2015-10-12 18:48:09 +00:00
|
|
|
select ROM_UNIFIED_SECTIONS
|
2015-07-20 11:28:28 +00:00
|
|
|
bool
|
|
|
|
|
|
2016-08-11 06:02:39 +00:00
|
|
|
config MX6ULL
|
|
|
|
|
bool
|
|
|
|
|
select MX6UL
|
|
|
|
|
|
2015-03-04 12:13:05 +00:00
|
|
|
choice
|
|
|
|
|
prompt "MX6 board select"
|
2015-05-12 19:46:23 +00:00
|
|
|
optional
|
2015-03-04 12:13:05 +00:00
|
|
|
|
arm: imx: Add support for Advantech DMS-BA16 board
Add support for Advantech DMS-BA16 board. The board is based on Advantech
BA16 module which has a i.MX6D processor. The board supports:
- FEC Ethernet
- USB Ports
- SDHC and MMC boot
- SPI NOR
- LVDS and HDMI display
Basic information about the module:
- Module manufacturer: Advantech
- CPU: Freescale ARM Cortex-A9 i.MX6D
- SPECS:
Up to 2GB Onboard DDR3 Memory;
Up to 16GB Onboard eMMC NAND Flash
Supports OpenGL ES 2.0 and OpenVG 1.1
HDMI, 24-bit LVDS
1x UART, 2x I2C, 8x GPIO,
4x Host USB 2.0 port, 1x USB OTG port,
1x micro SD (SDHC),1x SDIO, 1x SATA II,
1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Cc: u-boot@lists.denx.de
Cc: sbabic@denx.de
2016-07-29 15:44:46 +00:00
|
|
|
config TARGET_ADVANTECH_DMS_BA16
|
|
|
|
|
bool "Advantech dms-ba16"
|
|
|
|
|
select MX6Q
|
|
|
|
|
|
2015-08-07 12:35:24 +00:00
|
|
|
config TARGET_ARISTAINETOS
|
|
|
|
|
bool "aristainetos"
|
|
|
|
|
|
|
|
|
|
config TARGET_ARISTAINETOS2
|
|
|
|
|
bool "aristainetos2"
|
|
|
|
|
|
2015-08-24 09:36:40 +00:00
|
|
|
config TARGET_ARISTAINETOS2B
|
|
|
|
|
bool "Support aristainetos2-revB"
|
|
|
|
|
|
2015-08-07 12:35:24 +00:00
|
|
|
config TARGET_CGTQMX6EVAL
|
|
|
|
|
bool "cgtqmx6eval"
|
2015-11-19 21:02:36 +00:00
|
|
|
select SUPPORT_SPL
|
|
|
|
|
select DM
|
|
|
|
|
select DM_THERMAL
|
2015-08-07 12:35:24 +00:00
|
|
|
|
2015-07-23 14:19:33 +00:00
|
|
|
config TARGET_CM_FX6
|
2015-08-07 12:35:24 +00:00
|
|
|
bool "CM-FX6"
|
2015-07-23 14:19:33 +00:00
|
|
|
select SUPPORT_SPL
|
|
|
|
|
select DM
|
|
|
|
|
select DM_SERIAL
|
|
|
|
|
select DM_GPIO
|
|
|
|
|
|
2015-08-07 12:35:24 +00:00
|
|
|
config TARGET_EMBESTMX6BOARDS
|
|
|
|
|
bool "embestmx6boards"
|
|
|
|
|
|
arm: imx: Add support for GE Bx50v3 boards
Add support for GE B450v3, B650v3 and B850v3 boards. The boards
are based on Advantech BA16 module which has a i.MX6D processor.
The boards support:
- FEC Ethernet
- USB Ports
- SDHC and MMC boot
- SPI NOR
- LVDS and HDMI display
Basic information about the module:
- Module manufacturer: Advantech
- CPU: Freescale ARM Cortex-A9 i.MX6D
- SPECS:
Up to 2GB Onboard DDR3 Memory;
Up to 16GB Onboard eMMC NAND Flash
Supports OpenGL ES 2.0 and OpenVG 1.1
HDMI, 24-bit LVDS
1x UART, 2x I2C, 8x GPIO,
4x Host USB 2.0 port, 1x USB OTG port,
1x micro SD (SDHC),1x SDIO, 1x SATA II,
1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2016-01-29 20:16:40 +00:00
|
|
|
config TARGET_GE_B450V3
|
|
|
|
|
bool "General Electric B450v3"
|
|
|
|
|
select MX6Q
|
|
|
|
|
|
|
|
|
|
config TARGET_GE_B650V3
|
|
|
|
|
bool "General Electric B650v3"
|
|
|
|
|
select MX6Q
|
|
|
|
|
|
|
|
|
|
config TARGET_GE_B850V3
|
|
|
|
|
bool "General Electric B850v3"
|
|
|
|
|
select MX6Q
|
|
|
|
|
|
2015-08-07 12:35:24 +00:00
|
|
|
config TARGET_GW_VENTANA
|
|
|
|
|
bool "gw_ventana"
|
|
|
|
|
select SUPPORT_SPL
|
|
|
|
|
|
|
|
|
|
config TARGET_KOSAGI_NOVENA
|
|
|
|
|
bool "Kosagi Novena"
|
|
|
|
|
select SUPPORT_SPL
|
|
|
|
|
|
|
|
|
|
config TARGET_MX6CUBOXI
|
|
|
|
|
bool "Solid-run mx6 boards"
|
|
|
|
|
select SUPPORT_SPL
|
|
|
|
|
|
|
|
|
|
config TARGET_MX6QARM2
|
|
|
|
|
bool "mx6qarm2"
|
|
|
|
|
|
2016-10-08 12:30:11 +00:00
|
|
|
config TARGET_MX6Q_ICORE
|
|
|
|
|
bool "Support Engicam i.Core"
|
|
|
|
|
select MX6QDL
|
2016-10-08 12:30:19 +00:00
|
|
|
select OF_CONTROL
|
2016-10-08 12:30:11 +00:00
|
|
|
select DM
|
2016-10-25 06:23:22 +00:00
|
|
|
select DM_GPIO
|
|
|
|
|
select DM_MMC
|
2016-10-08 12:30:11 +00:00
|
|
|
select DM_THERMAL
|
|
|
|
|
select SUPPORT_SPL
|
|
|
|
|
|
2015-08-07 12:35:24 +00:00
|
|
|
config TARGET_MX6QSABREAUTO
|
|
|
|
|
bool "mx6qsabreauto"
|
|
|
|
|
select DM
|
|
|
|
|
select DM_THERMAL
|
|
|
|
|
|
|
|
|
|
config TARGET_MX6SABRESD
|
|
|
|
|
bool "mx6sabresd"
|
|
|
|
|
select SUPPORT_SPL
|
|
|
|
|
select DM
|
|
|
|
|
select DM_THERMAL
|
|
|
|
|
|
|
|
|
|
config TARGET_MX6SLEVK
|
|
|
|
|
bool "mx6slevk"
|
2015-08-17 08:11:05 +00:00
|
|
|
select SUPPORT_SPL
|
2015-08-07 12:35:24 +00:00
|
|
|
|
|
|
|
|
config TARGET_MX6SXSABRESD
|
|
|
|
|
bool "mx6sxsabresd"
|
2016-03-03 07:56:01 +00:00
|
|
|
select MX6SX
|
2015-08-07 12:35:24 +00:00
|
|
|
select SUPPORT_SPL
|
|
|
|
|
select DM
|
|
|
|
|
select DM_THERMAL
|
|
|
|
|
|
2016-02-01 02:41:32 +00:00
|
|
|
config TARGET_MX6SXSABREAUTO
|
|
|
|
|
bool "mx6sxsabreauto"
|
2016-03-03 07:56:01 +00:00
|
|
|
select MX6SX
|
2016-02-01 02:41:32 +00:00
|
|
|
select DM
|
|
|
|
|
select DM_THERMAL
|
|
|
|
|
|
imx: mx6ul: support mx6ul 9x9 evk board
This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk,
the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are:
1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC.
2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk
supports 512MB DDR3
3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package.
This patch add the following:
1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size()
2. Introduce a macro is_mx6ul_9x9_evk using
CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL
part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work,
so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with
mx6ul_14x14_evk. And we have no way to dymaically checking this chip
is 9x9 or 14x14.
3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations.
POWER related configurations also effect for mx6ul_14x14_evk. But
power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to
do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk.
4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM
configurations.
5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file
according to board_rev and board_name.
6. Add TARGET_MX6UL_9X9_EVK Kconfig entry
Boot Log:
U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53)
reading u-boot.img
reading u-boot.img
U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800)
CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz)
CPU: Commercial temperature grade (0C to 95C) at 41C
Reset cause: POR
Board: MX6UL 9x9 EVK
I2C: ready
DRAM: 256 MiB
PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC: FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: serial
Err: serial
Net: FEC1
Hit any key to stop autoboot: 0
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
2015-09-06 07:02:34 +00:00
|
|
|
config TARGET_MX6UL_9X9_EVK
|
|
|
|
|
bool "mx6ul_9x9_evk"
|
|
|
|
|
select MX6UL
|
|
|
|
|
select DM
|
|
|
|
|
select DM_THERMAL
|
|
|
|
|
select SUPPORT_SPL
|
|
|
|
|
|
2015-08-07 12:35:24 +00:00
|
|
|
config TARGET_MX6UL_14X14_EVK
|
|
|
|
|
bool "mx6ul_14x14_evk"
|
2015-08-19 07:48:58 +00:00
|
|
|
select MX6UL
|
2015-08-07 12:35:24 +00:00
|
|
|
select DM
|
|
|
|
|
select DM_THERMAL
|
|
|
|
|
select SUPPORT_SPL
|
|
|
|
|
|
2016-08-11 06:02:57 +00:00
|
|
|
config TARGET_MX6ULL_14X14_EVK
|
|
|
|
|
bool "Support mx6ull_14x14_evk"
|
|
|
|
|
select MX6ULL
|
|
|
|
|
select DM
|
|
|
|
|
select DM_THERMAL
|
|
|
|
|
|
2015-08-07 12:35:24 +00:00
|
|
|
config TARGET_NITROGEN6X
|
|
|
|
|
bool "nitrogen6x"
|
|
|
|
|
|
|
|
|
|
config TARGET_OT1200
|
|
|
|
|
bool "Bachmann OT1200"
|
|
|
|
|
select SUPPORT_SPL
|
|
|
|
|
|
2016-04-18 12:56:16 +00:00
|
|
|
config TARGET_PICO_IMX6UL
|
|
|
|
|
bool "PICO-IMX6UL-EMMC"
|
|
|
|
|
select MX6UL
|
|
|
|
|
|
2015-08-07 12:35:24 +00:00
|
|
|
config TARGET_PLATINUM_PICON
|
|
|
|
|
bool "platinum-picon"
|
|
|
|
|
select SUPPORT_SPL
|
|
|
|
|
|
|
|
|
|
config TARGET_PLATINUM_TITANIUM
|
|
|
|
|
bool "platinum-titanium"
|
|
|
|
|
select SUPPORT_SPL
|
|
|
|
|
|
2016-06-08 08:50:20 +00:00
|
|
|
config TARGET_PCM058
|
|
|
|
|
bool "Phytec PCM058 i.MX6 Quad"
|
|
|
|
|
select SUPPORT_SPL
|
|
|
|
|
|
2015-03-04 12:13:05 +00:00
|
|
|
config TARGET_SECOMX6
|
2015-08-07 12:35:24 +00:00
|
|
|
bool "secomx6 boards"
|
|
|
|
|
|
|
|
|
|
config TARGET_TBS2910
|
2015-08-13 19:08:45 +00:00
|
|
|
bool "TBS2910 Matrix ARM mini PC"
|
2015-08-07 12:35:24 +00:00
|
|
|
|
|
|
|
|
config TARGET_TITANIUM
|
|
|
|
|
bool "titanium"
|
2015-03-04 12:13:05 +00:00
|
|
|
|
2015-06-04 15:25:31 +00:00
|
|
|
config TARGET_TQMA6
|
|
|
|
|
bool "TQ Systems TQMa6 board"
|
|
|
|
|
|
2015-08-07 12:35:24 +00:00
|
|
|
config TARGET_UDOO
|
|
|
|
|
bool "udoo"
|
|
|
|
|
select SUPPORT_SPL
|
|
|
|
|
|
|
|
|
|
config TARGET_WANDBOARD
|
|
|
|
|
bool "wandboard"
|
|
|
|
|
select SUPPORT_SPL
|
|
|
|
|
|
|
|
|
|
config TARGET_WARP
|
|
|
|
|
bool "WaRP"
|
|
|
|
|
|
2016-02-10 10:41:26 +00:00
|
|
|
config TARGET_XPRESS
|
|
|
|
|
bool "CCV xPress"
|
|
|
|
|
select MX6UL
|
|
|
|
|
select DM
|
|
|
|
|
select DM_THERMAL
|
|
|
|
|
select SUPPORT_SPL
|
|
|
|
|
|
2016-06-06 09:19:42 +00:00
|
|
|
config TARGET_ZC5202
|
|
|
|
|
bool "zc5202"
|
|
|
|
|
select SUPPORT_SPL
|
|
|
|
|
select DM
|
|
|
|
|
select DM_THERMAL
|
|
|
|
|
|
|
|
|
|
config TARGET_ZC5601
|
|
|
|
|
bool "zc5601"
|
|
|
|
|
select SUPPORT_SPL
|
|
|
|
|
select DM
|
|
|
|
|
select DM_THERMAL
|
|
|
|
|
|
2015-03-04 12:13:05 +00:00
|
|
|
endchoice
|
|
|
|
|
|
2015-03-04 12:13:03 +00:00
|
|
|
config SYS_SOC
|
|
|
|
|
default "mx6"
|
|
|
|
|
|
arm: imx: Add support for GE Bx50v3 boards
Add support for GE B450v3, B650v3 and B850v3 boards. The boards
are based on Advantech BA16 module which has a i.MX6D processor.
The boards support:
- FEC Ethernet
- USB Ports
- SDHC and MMC boot
- SPI NOR
- LVDS and HDMI display
Basic information about the module:
- Module manufacturer: Advantech
- CPU: Freescale ARM Cortex-A9 i.MX6D
- SPECS:
Up to 2GB Onboard DDR3 Memory;
Up to 16GB Onboard eMMC NAND Flash
Supports OpenGL ES 2.0 and OpenVG 1.1
HDMI, 24-bit LVDS
1x UART, 2x I2C, 8x GPIO,
4x Host USB 2.0 port, 1x USB OTG port,
1x micro SD (SDHC),1x SDIO, 1x SATA II,
1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2016-01-29 20:16:40 +00:00
|
|
|
source "board/ge/bx50v3/Kconfig"
|
arm: imx: Add support for Advantech DMS-BA16 board
Add support for Advantech DMS-BA16 board. The board is based on Advantech
BA16 module which has a i.MX6D processor. The board supports:
- FEC Ethernet
- USB Ports
- SDHC and MMC boot
- SPI NOR
- LVDS and HDMI display
Basic information about the module:
- Module manufacturer: Advantech
- CPU: Freescale ARM Cortex-A9 i.MX6D
- SPECS:
Up to 2GB Onboard DDR3 Memory;
Up to 16GB Onboard eMMC NAND Flash
Supports OpenGL ES 2.0 and OpenVG 1.1
HDMI, 24-bit LVDS
1x UART, 2x I2C, 8x GPIO,
4x Host USB 2.0 port, 1x USB OTG port,
1x micro SD (SDHC),1x SDIO, 1x SATA II,
1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Cc: u-boot@lists.denx.de
Cc: sbabic@denx.de
2016-07-29 15:44:46 +00:00
|
|
|
source "board/advantech/dms-ba16/Kconfig"
|
2015-08-07 12:35:24 +00:00
|
|
|
source "board/aristainetos/Kconfig"
|
|
|
|
|
source "board/bachmann/ot1200/Kconfig"
|
|
|
|
|
source "board/barco/platinum/Kconfig"
|
|
|
|
|
source "board/barco/titanium/Kconfig"
|
|
|
|
|
source "board/boundary/nitrogen6x/Kconfig"
|
2016-02-10 10:41:26 +00:00
|
|
|
source "board/ccv/xpress/Kconfig"
|
2015-08-07 12:35:24 +00:00
|
|
|
source "board/compulab/cm_fx6/Kconfig"
|
|
|
|
|
source "board/congatec/cgtqmx6eval/Kconfig"
|
2016-06-06 09:19:42 +00:00
|
|
|
source "board/el/el6x/Kconfig"
|
2015-08-07 12:35:24 +00:00
|
|
|
source "board/embest/mx6boards/Kconfig"
|
2016-10-08 12:30:11 +00:00
|
|
|
source "board/engicam/icorem6/Kconfig"
|
2015-08-07 12:35:24 +00:00
|
|
|
source "board/freescale/mx6qarm2/Kconfig"
|
|
|
|
|
source "board/freescale/mx6qsabreauto/Kconfig"
|
|
|
|
|
source "board/freescale/mx6sabresd/Kconfig"
|
|
|
|
|
source "board/freescale/mx6slevk/Kconfig"
|
|
|
|
|
source "board/freescale/mx6sxsabresd/Kconfig"
|
2016-02-01 02:41:32 +00:00
|
|
|
source "board/freescale/mx6sxsabreauto/Kconfig"
|
2015-08-07 12:35:24 +00:00
|
|
|
source "board/freescale/mx6ul_14x14_evk/Kconfig"
|
2016-08-11 06:02:57 +00:00
|
|
|
source "board/freescale/mx6ullevk/Kconfig"
|
2016-06-08 08:50:20 +00:00
|
|
|
source "board/phytec/pcm058/Kconfig"
|
2015-08-07 12:35:24 +00:00
|
|
|
source "board/gateworks/gw_ventana/Kconfig"
|
|
|
|
|
source "board/kosagi/novena/Kconfig"
|
2015-03-04 12:13:05 +00:00
|
|
|
source "board/seco/Kconfig"
|
2015-08-07 12:35:24 +00:00
|
|
|
source "board/solidrun/mx6cuboxi/Kconfig"
|
2016-04-18 12:56:16 +00:00
|
|
|
source "board/technexion/pico-imx6ul/Kconfig"
|
2015-08-07 12:35:24 +00:00
|
|
|
source "board/tbs/tbs2910/Kconfig"
|
2015-06-04 15:25:31 +00:00
|
|
|
source "board/tqc/tqma6/Kconfig"
|
2015-08-07 12:35:24 +00:00
|
|
|
source "board/udoo/Kconfig"
|
|
|
|
|
source "board/wandboard/Kconfig"
|
|
|
|
|
source "board/warp/Kconfig"
|
2015-03-04 12:13:05 +00:00
|
|
|
|
2015-03-04 12:13:03 +00:00
|
|
|
endif
|
