Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-19 03:08:31 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/powerpc/cpu/mpc85xx/speed.c

667 lines
18 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
// SPDX-License-Identifier: GPL-2.0+
* Patches by Xianghua Xiao, 15 Oct 2003: - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
2003-10-15 23:53:47 +00:00
/*
powerpc/85xx: Protect all LBC code with CONFIG_FSL_LBC Future SoC (like the P1010) replace the LBC controller with the new IFC (Integrated Flash Controller) so ensure we properly protect code that is related to the LBC. Signed-off-by: Dipen Dudhat <Dipen.Dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-19 07:16:27 +00:00
* Copyright 2004, 2007-2011 Freescale Semiconductor, Inc.
ppc/p4080: Determine various chip frequencies on CoreNet platforms The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 07:46:19 +00:00
*
* Patches by Xianghua Xiao, 15 Oct 2003: - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
2003-10-15 23:53:47 +00:00
* (C) Copyright 2003 Motorola Inc.
* Xianghua Xiao, (X.Xiao@motorola.com)
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*/
#include <common.h>
common: Move some CPU functions out of common.h These functions belong in cpu_func.h since they do not use driver model. Move them over. Don't bother adding comments since these functions should be deleted. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-14 19:57:32 +00:00
#include <cpu_func.h>
nxp: Migrate CONFIG_DDR_CLK_FREQ to Kconfig As this symbol can either be a fixed value or the function get_board_ddr_clk, migration is tricky. Introduce a choice of DYNAMIC or STATIC_DDR_CLK_FREQ. If DYNAMIC, we continue to use the board defined get_board_ddr_clk function. If STATIC, set CONFIG_DDR_CLK_FREQ to that value and now include/clock_legacy.h contains the function prototype or defines get_board_ddr_clk() to that static value. Update callers to test for DYNAMIC or STATIC. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-21 17:50:17 +00:00
#include <clock_legacy.h>
* Patches by Xianghua Xiao, 15 Oct 2003: - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
2003-10-15 23:53:47 +00:00
#include <ppc_asm.tmpl>
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-31 03:38:53 +00:00
#include <asm/global_data.h>
powerpc/85xx: Add P1021 specific QE and UEC support P1021 has some QE pins which need to be set in pmuxcr register before using QE functions. In this patch, pin QE0 and QE3 are set for UCC1 and UCC5 in Eth mode. QE9 and QE12 are set for MII management. QE12 needs to be released after MII access because QE12 pin is muxed with LBCTL signal. Also added relevant QE support defines unique to P1021. The P1021 QE is shared on P1012, P1016, and P1025. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-11 07:25:30 +00:00
#include <linux/compiler.h>
* Patches by Xianghua Xiao, 15 Oct 2003: - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
2003-10-15 23:53:47 +00:00
#include <asm/processor.h>
mpc8[56]xx: Put localbus clock in sysinfo and gd Currently MPC85xx and MPC86xx boards just calculate the localbus frequency and print it out, but don't save it. This changes where its calculated and stored to be more consistent with the CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock. The localbus frequency is added to sysinfo and calculated when sysinfo is set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are. get_clocks() copies the frequency into the global data, as the other frequencies are, into a new field that is only enabled for MPC85xx and MPC86xx. checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency from sysinfo, like the other frequencies, instead of calculating it on the spot. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jon Loeliger <jdl@freescale.com>
2008-12-03 23:16:37 +00:00
#include <asm/io.h>
* Patches by Xianghua Xiao, 15 Oct 2003: - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
2003-10-15 23:53:47 +00:00
GCC-4.x fixes: clean up global data pointer initialization for all boards.
2006-03-31 16:32:53 +00:00
DECLARE_GLOBAL_DATA_PTR;
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
#ifndef CONFIG_SYS_FSL_NUM_CC_PLLS
#define CONFIG_SYS_FSL_NUM_CC_PLLS 6
#endif
* Patches by Xianghua Xiao, 15 Oct 2003: - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
2003-10-15 23:53:47 +00:00
/* --------------------------------------------------------------- */
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
void get_sys_info(sys_info_t *sys_info)
* Patches by Xianghua Xiao, 15 Oct 2003: - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
2003-10-15 23:53:47 +00:00
{
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-16 13:01:15 +00:00
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
ppc/p4080: Determine various chip frequencies on CoreNet platforms The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 07:46:19 +00:00
#ifdef CONFIG_FSL_CORENET
volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR);
powerpc/mp: add support for discontiguous cores Some SOCs have discontiguously-numbered cores, and so we can't determine the valid core numbers via the FRR register any more. We define CPU_TYPE_ENTRY_MASK to specify a discontiguous core mask, and helper functions to process the mask and enumerate over the set of valid cores. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-05 21:15:24 +00:00
unsigned int cpu;
powerpc/mpc85xx: Add DSP side awareness for Freescale Heterogeneous SoCs The code provides framework for heterogeneous multicore chips based on StarCore and Power Architecture which are chasis-2 compliant, like B4860 and B4420 It will make u-boot recognize all non-ppc cores and peripherals like SC3900/DSP CPUs, MAPLE, CPRI and print their configuration in u-boot logs. Example boot logs of B4860QDS: U-Boot 2015.01-00232-geef6e36-dirty (Jan 19 2015 - 11:58:45) CPU0: B4860E, Version: 2.2, (0x86880022) Core: e6500, Version: 2.0, (0x80400120) Clock Configuration: CPU0:1600 MHz, CPU1:1600 MHz, CPU2:1600 MHz, CPU3:1600 MHz, DSP CPU0:1200 MHz, DSP CPU1:1200 MHz, DSP CPU2:1200 MHz, DSP CPU3:1200 MHz, DSP CPU4:1200 MHz, DSP CPU5:1200 MHz, CCB:666.667 MHz, DDR:933.333 MHz (1866.667 MT/s data rate) (Asynchronous), IFC:166.667 MHz CPRI:600 MHz MAPLE:600 MHz, MAPLE-ULB:800 MHz, MAPLE-eTVPE:1000 MHz FMAN1: 666.667 MHz QMAN: 333.333 MHz Top level changes include: (1) Top level CONFIG to identify HETEROGENUOUS clusters (2) CONFIGS for SC3900/DSP components (3) Global structures like "cpu_type" and "MPC85xx_SYS_INFO" updated for dsp cores and other components (3) APIs to get DSP num cores and their Mask like: cpu_dsp_mask, cpu_num_dspcores etc same as that of PowerPC (5) Code to fetch and print SC cores and other heterogenous device's frequencies (6) README added for the same Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-01-19 07:16:54 +00:00
#ifdef CONFIG_HETROGENOUS_CLUSTERS
unsigned int dsp_cpu;
uint rcw_tmp1, rcw_tmp2;
#endif
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
int cc_group[12] = CONFIG_SYS_FSL_CLUSTER_CLOCKS;
#endif
mpc85xx/t2080: Fix parsing DDR ratio for new revision T2080 rev 1.1 changes MEM_RAT in RCW, which requires new parsing for ratio, the same way as T4240 rev 2.0. Signed-off-by: York Sun <yorksun@freescale.com> CC: Shengzhou Liu <Shengzhou.Liu@freescale.com>
2014-10-27 18:31:33 +00:00
__maybe_unused u32 svr;
ppc/p4080: Determine various chip frequencies on CoreNet platforms The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 07:46:19 +00:00
const u8 core_cplx_PLL[16] = {
[ 0] = 0, /* CC1 PPL / 1 */
[ 1] = 0, /* CC1 PPL / 2 */
[ 2] = 0, /* CC1 PPL / 4 */
[ 4] = 1, /* CC2 PPL / 1 */
[ 5] = 1, /* CC2 PPL / 2 */
[ 6] = 1, /* CC2 PPL / 4 */
[ 8] = 2, /* CC3 PPL / 1 */
[ 9] = 2, /* CC3 PPL / 2 */
[10] = 2, /* CC3 PPL / 4 */
[12] = 3, /* CC4 PPL / 1 */
[13] = 3, /* CC4 PPL / 2 */
[14] = 3, /* CC4 PPL / 4 */
};
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
const u8 core_cplx_pll_div[16] = {
ppc/p4080: Determine various chip frequencies on CoreNet platforms The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 07:46:19 +00:00
[ 0] = 1, /* CC1 PPL / 1 */
[ 1] = 2, /* CC1 PPL / 2 */
[ 2] = 4, /* CC1 PPL / 4 */
[ 4] = 1, /* CC2 PPL / 1 */
[ 5] = 2, /* CC2 PPL / 2 */
[ 6] = 4, /* CC2 PPL / 4 */
[ 8] = 1, /* CC3 PPL / 1 */
[ 9] = 2, /* CC3 PPL / 2 */
[10] = 4, /* CC3 PPL / 4 */
[12] = 1, /* CC4 PPL / 1 */
[13] = 2, /* CC4 PPL / 2 */
[14] = 4, /* CC4 PPL / 4 */
};
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
uint i, freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
powerpc/mpc85xx: drop eSDHC periperhal clock code The below patch added eSDHC periperhal clock code initially. 2d9ca2c mmc: fsl_esdhc: Add peripheral clock support The purpose was to fix up device tree properties "peripheral-frequency" so that linux could get the periperhal clock by it. However the implementation on both u-boot and linux was only for a Freescale SDK release. The linux part implementation had never been upstreamed. These code should not have been exist on u-boot mainline. Let's remove the powerpc part changes but keep the changes in fsl_esdhc driver. The changes in fsl_esdhc driver could be utilized to support SD UHS and eMMC HS200/HS400 speed modes for current Layerscape ARM platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-12-19 10:59:27 +00:00
#if !defined(CONFIG_FM_PLAT_CLK_DIV) || !defined(CONFIG_PME_PLAT_CLK_DIV)
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
uint rcw_tmp;
#endif
uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
ppc/p4080: Determine various chip frequencies on CoreNet platforms The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 07:46:19 +00:00
unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
ppc/p4080: Fix synchronous frequency calculations When DDR is in synchronous mode, the existing code assigns sysclk frequency to DDR frequency. It should be synchronous with the platform frequency. CPU frequency is based on platform frequency in synchronous mode. Also fix: * Fixes the bit mask for DDR_SYNC (RCWSR5[184]) * Corrects the detection of synchronous mode. Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-10 09:32:43 +00:00
uint mem_pll_rat;
ppc/p4080: Determine various chip frequencies on CoreNet platforms The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 07:46:19 +00:00
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_systembus = sysclk;
powerpc/mpc85xx: Add support for single source clocking Single-source clocking is new feature introduced in T1040. In this mode, a single differential clock is supplied to the DIFF_SYSCLK_P/N inputs to the processor, which in turn is used to supply clocks to the sysclock, ddrclock and usbclock. So, both ddrclock and syclock are driven by same differential sysclock in single-source clocking mode whereas in normal clocking mode, generally separate DDRCLK and SYSCLK pins provides reference clock for sysclock and ddrclock DDR_REFCLK_SEL rcw bit is used to determine DDR clock source -If DDR_REFCLK_SEL rcw bit is 0, then DDR PLLs are driven in normal clocking mode by DDR_Reference clock -If DDR_REFCLK_SEL rcw bit is 1, then DDR PLLs are driven in single source clocking mode by DIFF_SYSCLK Add code to determine ddrclock based on DDR_REFCLK_SEL rcw bit. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
2013-12-17 08:55:52 +00:00
#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
powerpc/85xx: Enhance get_sys_info() to check clocking mode T1040 and it's variants provide "Single Oscillator Source" Reference Clock Mode. In this mode, single onboard oscillator(DIFF_SYSCLK) can provide the reference clock (100MHz) to the following PLLs: • Platform PLL • Core PLLs • USB PLL • DDR PLL, etc The cfg_eng_use0 of porsr1 register identifies whether the SYSCLK (single-ended) or DIFF_SYSCLK (differential) is selected as the clock input to the chip. get_sys_info has been enhanced to add the diff_sysclk so that the various drivers can be made aware of ths diff sysclk configuration and act accordingly. Other changes: -single_src to ddr_refclk_sel, as it is use for checking ddr reference clock -Removed the print of single_src from get_sys_info as this will be -printed whenever somebody calls get_sys_info which is not appropriate. -Add print of single_src in checkcpu as it is called only once during initialization Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Vijay Rai <vijay.rai@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-04-15 06:04:12 +00:00
uint ddr_refclk_sel;
unsigned int porsr1_sys_clk;
porsr1_sys_clk = in_be32(&gur->porsr1) >> FSL_DCFG_PORSR1_SYSCLK_SHIFT
& FSL_DCFG_PORSR1_SYSCLK_MASK;
if (porsr1_sys_clk == FSL_DCFG_PORSR1_SYSCLK_DIFF)
sys_info->diff_sysclk = 1;
else
sys_info->diff_sysclk = 0;
powerpc/mpc85xx: Add support for single source clocking Single-source clocking is new feature introduced in T1040. In this mode, a single differential clock is supplied to the DIFF_SYSCLK_P/N inputs to the processor, which in turn is used to supply clocks to the sysclock, ddrclock and usbclock. So, both ddrclock and syclock are driven by same differential sysclock in single-source clocking mode whereas in normal clocking mode, generally separate DDRCLK and SYSCLK pins provides reference clock for sysclock and ddrclock DDR_REFCLK_SEL rcw bit is used to determine DDR clock source -If DDR_REFCLK_SEL rcw bit is 0, then DDR PLLs are driven in normal clocking mode by DDR_Reference clock -If DDR_REFCLK_SEL rcw bit is 1, then DDR PLLs are driven in single source clocking mode by DIFF_SYSCLK Add code to determine ddrclock based on DDR_REFCLK_SEL rcw bit. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
2013-12-17 08:55:52 +00:00
/*
* DDR_REFCLK_SEL rcw bit is used to determine if DDR PLLS
* are driven by separate DDR Refclock or single source
* differential clock.
*/
powerpc/85xx: Enhance get_sys_info() to check clocking mode T1040 and it's variants provide "Single Oscillator Source" Reference Clock Mode. In this mode, single onboard oscillator(DIFF_SYSCLK) can provide the reference clock (100MHz) to the following PLLs: • Platform PLL • Core PLLs • USB PLL • DDR PLL, etc The cfg_eng_use0 of porsr1 register identifies whether the SYSCLK (single-ended) or DIFF_SYSCLK (differential) is selected as the clock input to the chip. get_sys_info has been enhanced to add the diff_sysclk so that the various drivers can be made aware of ths diff sysclk configuration and act accordingly. Other changes: -single_src to ddr_refclk_sel, as it is use for checking ddr reference clock -Removed the print of single_src from get_sys_info as this will be -printed whenever somebody calls get_sys_info which is not appropriate. -Add print of single_src in checkcpu as it is called only once during initialization Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Vijay Rai <vijay.rai@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-04-15 06:04:12 +00:00
ddr_refclk_sel = (in_be32(&gur->rcwsr[5]) >>
powerpc/mpc85xx: Add support for single source clocking Single-source clocking is new feature introduced in T1040. In this mode, a single differential clock is supplied to the DIFF_SYSCLK_P/N inputs to the processor, which in turn is used to supply clocks to the sysclock, ddrclock and usbclock. So, both ddrclock and syclock are driven by same differential sysclock in single-source clocking mode whereas in normal clocking mode, generally separate DDRCLK and SYSCLK pins provides reference clock for sysclock and ddrclock DDR_REFCLK_SEL rcw bit is used to determine DDR clock source -If DDR_REFCLK_SEL rcw bit is 0, then DDR PLLs are driven in normal clocking mode by DDR_Reference clock -If DDR_REFCLK_SEL rcw bit is 1, then DDR PLLs are driven in single source clocking mode by DIFF_SYSCLK Add code to determine ddrclock based on DDR_REFCLK_SEL rcw bit. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
2013-12-17 08:55:52 +00:00
FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_SHIFT) &
FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_MASK;
/*
powerpc/85xx: Enhance get_sys_info() to check clocking mode T1040 and it's variants provide "Single Oscillator Source" Reference Clock Mode. In this mode, single onboard oscillator(DIFF_SYSCLK) can provide the reference clock (100MHz) to the following PLLs: • Platform PLL • Core PLLs • USB PLL • DDR PLL, etc The cfg_eng_use0 of porsr1 register identifies whether the SYSCLK (single-ended) or DIFF_SYSCLK (differential) is selected as the clock input to the chip. get_sys_info has been enhanced to add the diff_sysclk so that the various drivers can be made aware of ths diff sysclk configuration and act accordingly. Other changes: -single_src to ddr_refclk_sel, as it is use for checking ddr reference clock -Removed the print of single_src from get_sys_info as this will be -printed whenever somebody calls get_sys_info which is not appropriate. -Add print of single_src in checkcpu as it is called only once during initialization Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Vijay Rai <vijay.rai@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-04-15 06:04:12 +00:00
* For single source clocking, both ddrclock and sysclock
powerpc/mpc85xx: Add support for single source clocking Single-source clocking is new feature introduced in T1040. In this mode, a single differential clock is supplied to the DIFF_SYSCLK_P/N inputs to the processor, which in turn is used to supply clocks to the sysclock, ddrclock and usbclock. So, both ddrclock and syclock are driven by same differential sysclock in single-source clocking mode whereas in normal clocking mode, generally separate DDRCLK and SYSCLK pins provides reference clock for sysclock and ddrclock DDR_REFCLK_SEL rcw bit is used to determine DDR clock source -If DDR_REFCLK_SEL rcw bit is 0, then DDR PLLs are driven in normal clocking mode by DDR_Reference clock -If DDR_REFCLK_SEL rcw bit is 1, then DDR PLLs are driven in single source clocking mode by DIFF_SYSCLK Add code to determine ddrclock based on DDR_REFCLK_SEL rcw bit. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
2013-12-17 08:55:52 +00:00
* are driven by differential sysclock.
*/
powerpc/85xx: Enhance get_sys_info() to check clocking mode T1040 and it's variants provide "Single Oscillator Source" Reference Clock Mode. In this mode, single onboard oscillator(DIFF_SYSCLK) can provide the reference clock (100MHz) to the following PLLs: • Platform PLL • Core PLLs • USB PLL • DDR PLL, etc The cfg_eng_use0 of porsr1 register identifies whether the SYSCLK (single-ended) or DIFF_SYSCLK (differential) is selected as the clock input to the chip. get_sys_info has been enhanced to add the diff_sysclk so that the various drivers can be made aware of ths diff sysclk configuration and act accordingly. Other changes: -single_src to ddr_refclk_sel, as it is use for checking ddr reference clock -Removed the print of single_src from get_sys_info as this will be -printed whenever somebody calls get_sys_info which is not appropriate. -Add print of single_src in checkcpu as it is called only once during initialization Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Vijay Rai <vijay.rai@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-04-15 06:04:12 +00:00
if (ddr_refclk_sel == FSL_CORENET2_RCWSR5_DDR_REFCLK_SINGLE_CLK)
powerpc/mpc85xx: Add support for single source clocking Single-source clocking is new feature introduced in T1040. In this mode, a single differential clock is supplied to the DIFF_SYSCLK_P/N inputs to the processor, which in turn is used to supply clocks to the sysclock, ddrclock and usbclock. So, both ddrclock and syclock are driven by same differential sysclock in single-source clocking mode whereas in normal clocking mode, generally separate DDRCLK and SYSCLK pins provides reference clock for sysclock and ddrclock DDR_REFCLK_SEL rcw bit is used to determine DDR clock source -If DDR_REFCLK_SEL rcw bit is 0, then DDR PLLs are driven in normal clocking mode by DDR_Reference clock -If DDR_REFCLK_SEL rcw bit is 1, then DDR PLLs are driven in single source clocking mode by DIFF_SYSCLK Add code to determine ddrclock based on DDR_REFCLK_SEL rcw bit. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
2013-12-17 08:55:52 +00:00
sys_info->freq_ddrbus = CONFIG_SYS_CLK_FREQ;
powerpc/85xx: Enhance get_sys_info() to check clocking mode T1040 and it's variants provide "Single Oscillator Source" Reference Clock Mode. In this mode, single onboard oscillator(DIFF_SYSCLK) can provide the reference clock (100MHz) to the following PLLs: • Platform PLL • Core PLLs • USB PLL • DDR PLL, etc The cfg_eng_use0 of porsr1 register identifies whether the SYSCLK (single-ended) or DIFF_SYSCLK (differential) is selected as the clock input to the chip. get_sys_info has been enhanced to add the diff_sysclk so that the various drivers can be made aware of ths diff sysclk configuration and act accordingly. Other changes: -single_src to ddr_refclk_sel, as it is use for checking ddr reference clock -Removed the print of single_src from get_sys_info as this will be -printed whenever somebody calls get_sys_info which is not appropriate. -Add print of single_src in checkcpu as it is called only once during initialization Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Vijay Rai <vijay.rai@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-04-15 06:04:12 +00:00
else
powerpc/mpc85xx: Add support for single source clocking Single-source clocking is new feature introduced in T1040. In this mode, a single differential clock is supplied to the DIFF_SYSCLK_P/N inputs to the processor, which in turn is used to supply clocks to the sysclock, ddrclock and usbclock. So, both ddrclock and syclock are driven by same differential sysclock in single-source clocking mode whereas in normal clocking mode, generally separate DDRCLK and SYSCLK pins provides reference clock for sysclock and ddrclock DDR_REFCLK_SEL rcw bit is used to determine DDR clock source -If DDR_REFCLK_SEL rcw bit is 0, then DDR PLLs are driven in normal clocking mode by DDR_Reference clock -If DDR_REFCLK_SEL rcw bit is 1, then DDR PLLs are driven in single source clocking mode by DIFF_SYSCLK Add code to determine ddrclock based on DDR_REFCLK_SEL rcw bit. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
2013-12-17 08:55:52 +00:00
#endif
nxp: Migrate CONFIG_DDR_CLK_FREQ to Kconfig As this symbol can either be a fixed value or the function get_board_ddr_clk, migration is tricky. Introduce a choice of DYNAMIC or STATIC_DDR_CLK_FREQ. If DYNAMIC, we continue to use the board defined get_board_ddr_clk function. If STATIC, set CONFIG_DDR_CLK_FREQ to that value and now include/clock_legacy.h contains the function prototype or defines get_board_ddr_clk() to that static value. Update callers to test for DYNAMIC or STATIC. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-21 17:50:17 +00:00
#if defined(CONFIG_DYNAMIC_DDR_CLK_FREQ) || defined(CONFIG_STATIC_DDR_CLK_FREQ)
sys_info->freq_ddrbus = get_board_ddr_clk();
powerpc/mpc85xx: Add CONFIG_DDR_CLK_FREQ for corenet platform New corenet platforms with chassis2 have separated DDR clock inputs. Use CONFIG_DDR_CLK_FREQ for DDR clock. This patch also cleans up the logic of detecting and displaying synchronous vs asynchronous mode. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:31 +00:00
#else
powerpc/mpc85xx: Add support for single source clocking Single-source clocking is new feature introduced in T1040. In this mode, a single differential clock is supplied to the DIFF_SYSCLK_P/N inputs to the processor, which in turn is used to supply clocks to the sysclock, ddrclock and usbclock. So, both ddrclock and syclock are driven by same differential sysclock in single-source clocking mode whereas in normal clocking mode, generally separate DDRCLK and SYSCLK pins provides reference clock for sysclock and ddrclock DDR_REFCLK_SEL rcw bit is used to determine DDR clock source -If DDR_REFCLK_SEL rcw bit is 0, then DDR PLLs are driven in normal clocking mode by DDR_Reference clock -If DDR_REFCLK_SEL rcw bit is 1, then DDR PLLs are driven in single source clocking mode by DIFF_SYSCLK Add code to determine ddrclock based on DDR_REFCLK_SEL rcw bit. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
2013-12-17 08:55:52 +00:00
sys_info->freq_ddrbus = sysclk;
powerpc/mpc85xx: Add CONFIG_DDR_CLK_FREQ for corenet platform New corenet platforms with chassis2 have separated DDR clock inputs. Use CONFIG_DDR_CLK_FREQ for DDR clock. This patch also cleans up the logic of detecting and displaying synchronous vs asynchronous mode. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:31 +00:00
#endif
ppc/p4080: Determine various chip frequencies on CoreNet platforms The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 07:46:19 +00:00
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
powerpc/mpc85xx: change RCW MEM_PLL_PLAT for Chassis generation 2 Chassis generation 2 has different mask and shift. Use macro instead of magic numbers. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:09 +00:00
mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT)
& FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
powerpc/mpc85xx: Add workaround for erratum A007212 Erratum A007212 for DDR is about a runaway condition for DDR PLL oscilliator. Please refer to erratum document for detail. For this workaround to work, DDR PLL needs to be disabled in RCW. However, u-boot needs to know the expected PLL ratio. We put the ratio in a reserved field RCW[18:23]. U-boot will skip this workaround if DDR PLL ratio is set, or the reserved field is not set. Workaround for erratum A007212 applies to selected versions of B4/T4 SoCs. It is safe to apply the workaround to all versions. It is helpful for upgrading SoC without changing u-boot. In case DDR PLL is disabled by RCW (part of the erratum workaround), we need this u-boot workround to bring up DDR clock. Signed-off-by: York Sun <yorksun@freescale.com>
2014-03-28 22:07:27 +00:00
#ifdef CONFIG_SYS_FSL_ERRATUM_A007212
if (mem_pll_rat == 0) {
mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
FSL_CORENET_RCWSR0_MEM_PLL_RAT_RESV_SHIFT) &
FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
}
#endif
T4240: Address T4240/T4160 Rev2.0 DDR clock change MEM_PLL_RAT on T4240/T4160 Rev2.0 uses a value which is half of Rev1.0. It's 12 in Rev1.0, for Rev2.0 it uses 6. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-11-28 05:23:37 +00:00
/* T4240/T4160 Rev2.0 MEM_PLL_RAT uses a value which is half of
* T4240/T4160 Rev1.0. eg. It's 12 in Rev1.0, however, for Rev2.0
* it uses 6.
mpc85xx/t2080: Fix parsing DDR ratio for new revision T2080 rev 1.1 changes MEM_RAT in RCW, which requires new parsing for ratio, the same way as T4240 rev 2.0. Signed-off-by: York Sun <yorksun@freescale.com> CC: Shengzhou Liu <Shengzhou.Liu@freescale.com>
2014-10-27 18:31:33 +00:00
* T2080 rev 1.1 and later also use half mem_pll comparing with rev 1.0
T4240: Address T4240/T4160 Rev2.0 DDR clock change MEM_PLL_RAT on T4240/T4160 Rev2.0 uses a value which is half of Rev1.0. It's 12 in Rev1.0, for Rev2.0 it uses 6. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-11-28 05:23:37 +00:00
*/
ppc: Remove T4160RDB board This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. As this is the last ARCH_T4160 platform, remove that support as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-23 14:58:05 +00:00
#if defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T2080)
mpc85xx/t2080: Fix parsing DDR ratio for new revision T2080 rev 1.1 changes MEM_RAT in RCW, which requires new parsing for ratio, the same way as T4240 rev 2.0. Signed-off-by: York Sun <yorksun@freescale.com> CC: Shengzhou Liu <Shengzhou.Liu@freescale.com>
2014-10-27 18:31:33 +00:00
svr = get_svr();
switch (SVR_SOC_VER(svr)) {
case SVR_T4240:
case SVR_T4160:
case SVR_T4120:
case SVR_T4080:
if (SVR_MAJ(svr) >= 2)
mem_pll_rat *= 2;
break;
case SVR_T2080:
case SVR_T2081:
if ((SVR_MAJ(svr) > 1) || (SVR_MIN(svr) >= 1))
mem_pll_rat *= 2;
break;
default:
break;
}
T4240: Address T4240/T4160 Rev2.0 DDR clock change MEM_PLL_RAT on T4240/T4160 Rev2.0 uses a value which is half of Rev1.0. It's 12 in Rev1.0, for Rev2.0 it uses 6. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-11-28 05:23:37 +00:00
#endif
ppc/p4080: Fix synchronous frequency calculations When DDR is in synchronous mode, the existing code assigns sysclk frequency to DDR frequency. It should be synchronous with the platform frequency. CPU frequency is based on platform frequency in synchronous mode. Also fix: * Fixes the bit mask for DDR_SYNC (RCWSR5[184]) * Corrects the detection of synchronous mode. Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-10 09:32:43 +00:00
if (mem_pll_rat > 2)
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_ddrbus *= mem_pll_rat;
ppc/p4080: Fix synchronous frequency calculations When DDR is in synchronous mode, the existing code assigns sysclk frequency to DDR frequency. It should be synchronous with the platform frequency. CPU frequency is based on platform frequency in synchronous mode. Also fix: * Fixes the bit mask for DDR_SYNC (RCWSR5[184]) * Corrects the detection of synchronous mode. Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-10 09:32:43 +00:00
else
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_ddrbus = sys_info->freq_systembus * mem_pll_rat;
ppc/p4080: Determine various chip frequencies on CoreNet platforms The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 07:46:19 +00:00
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
ratio[i] = (in_be32(&clk->pllcgsr[i].pllcngsr) >> 1) & 0x3f;
ppc/p4080: Fix synchronous frequency calculations When DDR is in synchronous mode, the existing code assigns sysclk frequency to DDR frequency. It should be synchronous with the platform frequency. CPU frequency is based on platform frequency in synchronous mode. Also fix: * Fixes the bit mask for DDR_SYNC (RCWSR5[184]) * Corrects the detection of synchronous mode. Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-10 09:32:43 +00:00
if (ratio[i] > 4)
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
freq_c_pll[i] = sysclk * ratio[i];
ppc/p4080: Fix synchronous frequency calculations When DDR is in synchronous mode, the existing code assigns sysclk frequency to DDR frequency. It should be synchronous with the platform frequency. CPU frequency is based on platform frequency in synchronous mode. Also fix: * Fixes the bit mask for DDR_SYNC (RCWSR5[184]) * Corrects the detection of synchronous mode. Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-10 09:32:43 +00:00
else
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
freq_c_pll[i] = sys_info->freq_systembus * ratio[i];
ppc/p4080: Fix synchronous frequency calculations When DDR is in synchronous mode, the existing code assigns sysclk frequency to DDR frequency. It should be synchronous with the platform frequency. CPU frequency is based on platform frequency in synchronous mode. Also fix: * Fixes the bit mask for DDR_SYNC (RCWSR5[184]) * Corrects the detection of synchronous mode. Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-10 09:32:43 +00:00
}
powerpc/mpc85xx: Add DSP side awareness for Freescale Heterogeneous SoCs The code provides framework for heterogeneous multicore chips based on StarCore and Power Architecture which are chasis-2 compliant, like B4860 and B4420 It will make u-boot recognize all non-ppc cores and peripherals like SC3900/DSP CPUs, MAPLE, CPRI and print their configuration in u-boot logs. Example boot logs of B4860QDS: U-Boot 2015.01-00232-geef6e36-dirty (Jan 19 2015 - 11:58:45) CPU0: B4860E, Version: 2.2, (0x86880022) Core: e6500, Version: 2.0, (0x80400120) Clock Configuration: CPU0:1600 MHz, CPU1:1600 MHz, CPU2:1600 MHz, CPU3:1600 MHz, DSP CPU0:1200 MHz, DSP CPU1:1200 MHz, DSP CPU2:1200 MHz, DSP CPU3:1200 MHz, DSP CPU4:1200 MHz, DSP CPU5:1200 MHz, CCB:666.667 MHz, DDR:933.333 MHz (1866.667 MT/s data rate) (Asynchronous), IFC:166.667 MHz CPRI:600 MHz MAPLE:600 MHz, MAPLE-ULB:800 MHz, MAPLE-eTVPE:1000 MHz FMAN1: 666.667 MHz QMAN: 333.333 MHz Top level changes include: (1) Top level CONFIG to identify HETEROGENUOUS clusters (2) CONFIGS for SC3900/DSP components (3) Global structures like "cpu_type" and "MPC85xx_SYS_INFO" updated for dsp cores and other components (3) APIs to get DSP num cores and their Mask like: cpu_dsp_mask, cpu_num_dspcores etc same as that of PowerPC (5) Code to fetch and print SC cores and other heterogenous device's frequencies (6) README added for the same Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-01-19 07:16:54 +00:00
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
/*
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
* As per CHASSIS2 architeture total 12 clusters are posible and
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
* Each cluster has up to 4 cores, sharing the same PLL selection.
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
* The cluster clock assignment is SoC defined.
*
* Total 4 clock groups are possible with 3 PLLs each.
* as per array indices, clock group A has 0, 1, 2 numbered PLLs &
* clock group B has 3, 4, 6 and so on.
*
* Clock group A having PLL1, PLL2, PLL3, feeding cores of any cluster
* depends upon the SoC architeture. Same applies to other
* clock groups and clusters.
*
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
*/
powerpc/mp: add support for discontiguous cores Some SOCs have discontiguously-numbered cores, and so we can't determine the valid core numbers via the FRR register any more. We define CPU_TYPE_ENTRY_MASK to specify a discontiguous core mask, and helper functions to process the mask and enumerate over the set of valid cores. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-05 21:15:24 +00:00
for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
powerpc/chassis2: Change core numbering scheme To align with chassis generation 2 spec, all cores are numbered in sequence. The cores may reside across multiple clusters. Each cluster has zero to four cores. The first available core is numbered as core 0. The second available core is numbered as core 1 and so on. Core clocks are generated by each clusters. To identify the cluster of each core, topology registers are examined. Cluster clock registers are reorganized to be easily indexed. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-03-25 07:40:07 +00:00
int cluster = fsl_qoriq_core_to_cluster(cpu);
u32 c_pll_sel = (in_be32(&clk->clkcsr[cluster].clkcncsr) >> 27)
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
& 0xf;
ppc/p4080: Determine various chip frequencies on CoreNet platforms The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 07:46:19 +00:00
u32 cplx_pll = core_cplx_PLL[c_pll_sel];
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
cplx_pll += cc_group[cluster] - 1;
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_processor[cpu] =
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
ppc/p4080: Determine various chip frequencies on CoreNet platforms The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 07:46:19 +00:00
}
powerpc/mpc85xx: Add DSP side awareness for Freescale Heterogeneous SoCs The code provides framework for heterogeneous multicore chips based on StarCore and Power Architecture which are chasis-2 compliant, like B4860 and B4420 It will make u-boot recognize all non-ppc cores and peripherals like SC3900/DSP CPUs, MAPLE, CPRI and print their configuration in u-boot logs. Example boot logs of B4860QDS: U-Boot 2015.01-00232-geef6e36-dirty (Jan 19 2015 - 11:58:45) CPU0: B4860E, Version: 2.2, (0x86880022) Core: e6500, Version: 2.0, (0x80400120) Clock Configuration: CPU0:1600 MHz, CPU1:1600 MHz, CPU2:1600 MHz, CPU3:1600 MHz, DSP CPU0:1200 MHz, DSP CPU1:1200 MHz, DSP CPU2:1200 MHz, DSP CPU3:1200 MHz, DSP CPU4:1200 MHz, DSP CPU5:1200 MHz, CCB:666.667 MHz, DDR:933.333 MHz (1866.667 MT/s data rate) (Asynchronous), IFC:166.667 MHz CPRI:600 MHz MAPLE:600 MHz, MAPLE-ULB:800 MHz, MAPLE-eTVPE:1000 MHz FMAN1: 666.667 MHz QMAN: 333.333 MHz Top level changes include: (1) Top level CONFIG to identify HETEROGENUOUS clusters (2) CONFIGS for SC3900/DSP components (3) Global structures like "cpu_type" and "MPC85xx_SYS_INFO" updated for dsp cores and other components (3) APIs to get DSP num cores and their Mask like: cpu_dsp_mask, cpu_num_dspcores etc same as that of PowerPC (5) Code to fetch and print SC cores and other heterogenous device's frequencies (6) README added for the same Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-01-19 07:16:54 +00:00
#ifdef CONFIG_HETROGENOUS_CLUSTERS
for_each_cpu(i, dsp_cpu, cpu_num_dspcores(), cpu_dsp_mask()) {
int dsp_cluster = fsl_qoriq_dsp_core_to_cluster(dsp_cpu);
u32 c_pll_sel = (in_be32
(&clk->clkcsr[dsp_cluster].clkcncsr) >> 27)
& 0xf;
u32 cplx_pll = core_cplx_PLL[c_pll_sel];
cplx_pll += cc_group[dsp_cluster] - 1;
sys_info->freq_processor_dsp[dsp_cpu] =
freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
}
#endif
powerpc: B4420: Remove macro CONFIG_PPC_B4420 Replace CONFIG_PPC_B4420 with ARCH_B4420 in Kconfig and clean up existing macros.
2016-11-18 19:56:57 +00:00
#if defined(CONFIG_ARCH_B4860) || defined(CONFIG_ARCH_B4420) || \
ppc: Remove T2081QDS board and ARCH_T2081 support This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. It is also the only ARCH_T2081 board so remove that support as well. Cc: Shengzhou Liu <Shengzhou.Liu@nxp.com> Cc: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-21 01:06:21 +00:00
defined(CONFIG_ARCH_T2080)
powerpc/B4860: Corrected FMAN1 operating frequency print at u-boot The bit positions for FMAN1 freq in RCW is different for B4860. Also addded a case when FMAN1 frewuency is equal to systembus. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-03-25 07:33:09 +00:00
#define FM1_CLK_SEL 0xe0000000
#define FM1_CLK_SHIFT 29
ppc: Remove T1023RBD boards and T1024RDB_SECURE_BOOT These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is the only ARCH_T1023 platform left, remove that support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-15 01:34:22 +00:00
#elif defined(CONFIG_ARCH_T1024)
powerpc/mpc85xx: Add T1024/T1023 SoC support Add support for Freescale T1024/T1023 SoC. The T1024 SoC includes the following function and features: - Two 64-bit Power architecture e5500 cores, up to 1.4GHz - private 256KB L2 cache each core and shared 256KB CoreNet platform cache (CPC) - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support - Data Path Acceleration Architecture (DPAA) incorporating acceleration - Four MAC for 1G/2.5G/10G network interfaces (RGMII, SGMII, QSGMII, XFI) - High-speed peripheral interfaces - Three PCI Express 2.0 controllers - Additional peripheral interfaces - One SATA 2.0 controller - Two USB 2.0 controllers with integrated PHY - Enhanced secure digital host controller (SD/eSDHC/eMMC) - Enhanced serial peripheral interface (eSPI) - Four I2C controllers - Four 2-pin UARTs or two 4-pin UARTs - Integrated Flash Controller supporting NAND and NOR flash - Two 8-channel DMA engines - Multicore programmable interrupt controller (PIC) - LCD interface (DIU) with 12 bit dual data rate - QUICC Engine block supporting TDM, HDLC, and UART - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) - Support for hardware virtualization and partitioning enforcement - QorIQ Platform's Trust Architecture 2.0 Differences between T1024 and T1023: Feature T1024 T1023 QUICC Engine: yes no DIU: yes no Deep Sleep: yes no I2C controller: 4 3 DDR: 64-bit 32-bit IFC: 32-bit 28-bit Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-24 09:11:54 +00:00
#define FM1_CLK_SEL 0x00000007
#define FM1_CLK_SHIFT 0
powerpc/B4860: Corrected FMAN1 operating frequency print at u-boot The bit positions for FMAN1 freq in RCW is different for B4860. Also addded a case when FMAN1 frewuency is equal to systembus. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-03-25 07:33:09 +00:00
#else
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
#define PME_CLK_SEL 0xe0000000
#define PME_CLK_SHIFT 29
#define FM1_CLK_SEL 0x1c000000
#define FM1_CLK_SHIFT 26
powerpc/B4860: Corrected FMAN1 operating frequency print at u-boot The bit positions for FMAN1 freq in RCW is different for B4860. Also addded a case when FMAN1 frewuency is equal to systembus. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-03-25 07:33:09 +00:00
#endif
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
#if !defined(CONFIG_FM_PLAT_CLK_DIV) || !defined(CONFIG_PME_PLAT_CLK_DIV)
ppc: Remove T1023RBD boards and T1024RDB_SECURE_BOOT These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is the only ARCH_T1023 platform left, remove that support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-15 01:34:22 +00:00
#if defined(CONFIG_ARCH_T1024)
powerpc/mpc85xx: Add T1024/T1023 SoC support Add support for Freescale T1024/T1023 SoC. The T1024 SoC includes the following function and features: - Two 64-bit Power architecture e5500 cores, up to 1.4GHz - private 256KB L2 cache each core and shared 256KB CoreNet platform cache (CPC) - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support - Data Path Acceleration Architecture (DPAA) incorporating acceleration - Four MAC for 1G/2.5G/10G network interfaces (RGMII, SGMII, QSGMII, XFI) - High-speed peripheral interfaces - Three PCI Express 2.0 controllers - Additional peripheral interfaces - One SATA 2.0 controller - Two USB 2.0 controllers with integrated PHY - Enhanced secure digital host controller (SD/eSDHC/eMMC) - Enhanced serial peripheral interface (eSPI) - Four I2C controllers - Four 2-pin UARTs or two 4-pin UARTs - Integrated Flash Controller supporting NAND and NOR flash - Two 8-channel DMA engines - Multicore programmable interrupt controller (PIC) - LCD interface (DIU) with 12 bit dual data rate - QUICC Engine block supporting TDM, HDLC, and UART - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) - Support for hardware virtualization and partitioning enforcement - QorIQ Platform's Trust Architecture 2.0 Differences between T1024 and T1023: Feature T1024 T1023 QUICC Engine: yes no DIU: yes no Deep Sleep: yes no I2C controller: 4 3 DDR: 64-bit 32-bit IFC: 32-bit 28-bit Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-24 09:11:54 +00:00
rcw_tmp = in_be32(&gur->rcwsr[15]) - 4;
#else
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
rcw_tmp = in_be32(&gur->rcwsr[7]);
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
#endif
powerpc/mpc85xx: Add T1024/T1023 SoC support Add support for Freescale T1024/T1023 SoC. The T1024 SoC includes the following function and features: - Two 64-bit Power architecture e5500 cores, up to 1.4GHz - private 256KB L2 cache each core and shared 256KB CoreNet platform cache (CPC) - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support - Data Path Acceleration Architecture (DPAA) incorporating acceleration - Four MAC for 1G/2.5G/10G network interfaces (RGMII, SGMII, QSGMII, XFI) - High-speed peripheral interfaces - Three PCI Express 2.0 controllers - Additional peripheral interfaces - One SATA 2.0 controller - Two USB 2.0 controllers with integrated PHY - Enhanced secure digital host controller (SD/eSDHC/eMMC) - Enhanced serial peripheral interface (eSPI) - Four I2C controllers - Four 2-pin UARTs or two 4-pin UARTs - Integrated Flash Controller supporting NAND and NOR flash - Two 8-channel DMA engines - Multicore programmable interrupt controller (PIC) - LCD interface (DIU) with 12 bit dual data rate - QUICC Engine block supporting TDM, HDLC, and UART - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) - Support for hardware virtualization and partitioning enforcement - QorIQ Platform's Trust Architecture 2.0 Differences between T1024 and T1023: Feature T1024 T1023 QUICC Engine: yes no DIU: yes no Deep Sleep: yes no I2C controller: 4 3 DDR: 64-bit 32-bit IFC: 32-bit 28-bit Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-24 09:11:54 +00:00
#endif
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
#ifdef CONFIG_SYS_DPAA_PME
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
#ifndef CONFIG_PME_PLAT_CLK_DIV
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) {
case 1:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK];
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
case 2:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK] / 2;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
case 3:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK] / 3;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
case 4:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK] / 4;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
case 6:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK + 1] / 2;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
case 7:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK + 1] / 3;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
default:
printf("Error: Unknown PME clock select!\n");
case 0:
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_pme = sys_info->freq_systembus / 2;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
}
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
#else
sys_info->freq_pme = sys_info->freq_systembus / CONFIG_SYS_PME_CLK;
#endif
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
#endif
poweprc/85xx: add QMan frequency info and fdt fixup. Starting from QMan3.0, the QMan clock cycle needs be exposed so that the kernel driver can use it to calculate the shaper prescaler and rate. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-11 07:13:39 +00:00
#ifdef CONFIG_SYS_DPAA_QBMAN
powerpc/mpc85xx: Add T1024/T1023 SoC support Add support for Freescale T1024/T1023 SoC. The T1024 SoC includes the following function and features: - Two 64-bit Power architecture e5500 cores, up to 1.4GHz - private 256KB L2 cache each core and shared 256KB CoreNet platform cache (CPC) - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support - Data Path Acceleration Architecture (DPAA) incorporating acceleration - Four MAC for 1G/2.5G/10G network interfaces (RGMII, SGMII, QSGMII, XFI) - High-speed peripheral interfaces - Three PCI Express 2.0 controllers - Additional peripheral interfaces - One SATA 2.0 controller - Two USB 2.0 controllers with integrated PHY - Enhanced secure digital host controller (SD/eSDHC/eMMC) - Enhanced serial peripheral interface (eSPI) - Four I2C controllers - Four 2-pin UARTs or two 4-pin UARTs - Integrated Flash Controller supporting NAND and NOR flash - Two 8-channel DMA engines - Multicore programmable interrupt controller (PIC) - LCD interface (DIU) with 12 bit dual data rate - QUICC Engine block supporting TDM, HDLC, and UART - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) - Support for hardware virtualization and partitioning enforcement - QorIQ Platform's Trust Architecture 2.0 Differences between T1024 and T1023: Feature T1024 T1023 QUICC Engine: yes no DIU: yes no Deep Sleep: yes no I2C controller: 4 3 DDR: 64-bit 32-bit IFC: 32-bit 28-bit Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-24 09:11:54 +00:00
#ifndef CONFIG_QBMAN_CLK_DIV
#define CONFIG_QBMAN_CLK_DIV 2
#endif
sys_info->freq_qman = sys_info->freq_systembus / CONFIG_QBMAN_CLK_DIV;
poweprc/85xx: add QMan frequency info and fdt fixup. Starting from QMan3.0, the QMan clock cycle needs be exposed so that the kernel driver can use it to calculate the shaper prescaler and rate. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-11 07:13:39 +00:00
#endif
powerpc/mpc85xx: Add DSP side awareness for Freescale Heterogeneous SoCs The code provides framework for heterogeneous multicore chips based on StarCore and Power Architecture which are chasis-2 compliant, like B4860 and B4420 It will make u-boot recognize all non-ppc cores and peripherals like SC3900/DSP CPUs, MAPLE, CPRI and print their configuration in u-boot logs. Example boot logs of B4860QDS: U-Boot 2015.01-00232-geef6e36-dirty (Jan 19 2015 - 11:58:45) CPU0: B4860E, Version: 2.2, (0x86880022) Core: e6500, Version: 2.0, (0x80400120) Clock Configuration: CPU0:1600 MHz, CPU1:1600 MHz, CPU2:1600 MHz, CPU3:1600 MHz, DSP CPU0:1200 MHz, DSP CPU1:1200 MHz, DSP CPU2:1200 MHz, DSP CPU3:1200 MHz, DSP CPU4:1200 MHz, DSP CPU5:1200 MHz, CCB:666.667 MHz, DDR:933.333 MHz (1866.667 MT/s data rate) (Asynchronous), IFC:166.667 MHz CPRI:600 MHz MAPLE:600 MHz, MAPLE-ULB:800 MHz, MAPLE-eTVPE:1000 MHz FMAN1: 666.667 MHz QMAN: 333.333 MHz Top level changes include: (1) Top level CONFIG to identify HETEROGENUOUS clusters (2) CONFIGS for SC3900/DSP components (3) Global structures like "cpu_type" and "MPC85xx_SYS_INFO" updated for dsp cores and other components (3) APIs to get DSP num cores and their Mask like: cpu_dsp_mask, cpu_num_dspcores etc same as that of PowerPC (5) Code to fetch and print SC cores and other heterogenous device's frequencies (6) README added for the same Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-01-19 07:16:54 +00:00
#if defined(CONFIG_SYS_MAPLE)
#define CPRI_CLK_SEL 0x1C000000
#define CPRI_CLK_SHIFT 26
#define CPRI_ALT_CLK_SEL 0x00007000
#define CPRI_ALT_CLK_SHIFT 12
rcw_tmp1 = in_be32(&gur->rcwsr[7]); /* Reading RCW bits: 224-255*/
rcw_tmp2 = in_be32(&gur->rcwsr[15]); /* Reading RCW bits: 480-511*/
/* For MAPLE and CPRI frequency */
switch ((rcw_tmp1 & CPRI_CLK_SEL) >> CPRI_CLK_SHIFT) {
case 1:
sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK];
sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK];
break;
case 2:
sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 2;
sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 2;
break;
case 3:
sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 3;
sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 3;
break;
case 4:
sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 4;
sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 4;
break;
case 5:
if (((rcw_tmp2 & CPRI_ALT_CLK_SEL)
>> CPRI_ALT_CLK_SHIFT) == 6) {
sys_info->freq_maple =
freq_c_pll[CONFIG_SYS_CPRI_CLK - 2] / 2;
sys_info->freq_cpri =
freq_c_pll[CONFIG_SYS_CPRI_CLK - 2] / 2;
}
if (((rcw_tmp2 & CPRI_ALT_CLK_SEL)
>> CPRI_ALT_CLK_SHIFT) == 7) {
sys_info->freq_maple =
freq_c_pll[CONFIG_SYS_CPRI_CLK - 2] / 3;
sys_info->freq_cpri =
freq_c_pll[CONFIG_SYS_CPRI_CLK - 2] / 3;
}
break;
case 6:
sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK + 1] / 2;
sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK + 1] / 2;
break;
case 7:
sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK + 1] / 3;
sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK + 1] / 3;
break;
default:
printf("Error: Unknown MAPLE/CPRI clock select!\n");
}
/* For MAPLE ULB and eTVPE frequencies */
#define ULB_CLK_SEL 0x00000038
#define ULB_CLK_SHIFT 3
#define ETVPE_CLK_SEL 0x00000007
#define ETVPE_CLK_SHIFT 0
switch ((rcw_tmp2 & ULB_CLK_SEL) >> ULB_CLK_SHIFT) {
case 1:
sys_info->freq_maple_ulb = freq_c_pll[CONFIG_SYS_ULB_CLK];
break;
case 2:
sys_info->freq_maple_ulb = freq_c_pll[CONFIG_SYS_ULB_CLK] / 2;
break;
case 3:
sys_info->freq_maple_ulb = freq_c_pll[CONFIG_SYS_ULB_CLK] / 3;
break;
case 4:
sys_info->freq_maple_ulb = freq_c_pll[CONFIG_SYS_ULB_CLK] / 4;
break;
case 5:
sys_info->freq_maple_ulb = sys_info->freq_systembus;
break;
case 6:
sys_info->freq_maple_ulb =
freq_c_pll[CONFIG_SYS_ULB_CLK - 1] / 2;
break;
case 7:
sys_info->freq_maple_ulb =
freq_c_pll[CONFIG_SYS_ULB_CLK - 1] / 3;
break;
default:
printf("Error: Unknown MAPLE ULB clock select!\n");
}
switch ((rcw_tmp2 & ETVPE_CLK_SEL) >> ETVPE_CLK_SHIFT) {
case 1:
sys_info->freq_maple_etvpe = freq_c_pll[CONFIG_SYS_ETVPE_CLK];
break;
case 2:
sys_info->freq_maple_etvpe =
freq_c_pll[CONFIG_SYS_ETVPE_CLK] / 2;
break;
case 3:
sys_info->freq_maple_etvpe =
freq_c_pll[CONFIG_SYS_ETVPE_CLK] / 3;
break;
case 4:
sys_info->freq_maple_etvpe =
freq_c_pll[CONFIG_SYS_ETVPE_CLK] / 4;
break;
case 5:
sys_info->freq_maple_etvpe = sys_info->freq_systembus;
break;
case 6:
sys_info->freq_maple_etvpe =
freq_c_pll[CONFIG_SYS_ETVPE_CLK - 1] / 2;
break;
case 7:
sys_info->freq_maple_etvpe =
freq_c_pll[CONFIG_SYS_ETVPE_CLK - 1] / 3;
break;
default:
printf("Error: Unknown MAPLE eTVPE clock select!\n");
}
#endif
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
#ifdef CONFIG_SYS_DPAA_FMAN
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
#ifndef CONFIG_FM_PLAT_CLK_DIV
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) {
case 1:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK];
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
case 2:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK] / 2;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
case 3:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK] / 3;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
case 4:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK] / 4;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
powerpc/B4860: Corrected FMAN1 operating frequency print at u-boot The bit positions for FMAN1 freq in RCW is different for B4860. Also addded a case when FMAN1 frewuency is equal to systembus. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-03-25 07:33:09 +00:00
case 5:
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_fman[0] = sys_info->freq_systembus;
powerpc/B4860: Corrected FMAN1 operating frequency print at u-boot The bit positions for FMAN1 freq in RCW is different for B4860. Also addded a case when FMAN1 frewuency is equal to systembus. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-03-25 07:33:09 +00:00
break;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
case 6:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK + 1] / 2;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
case 7:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK + 1] / 3;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
default:
printf("Error: Unknown FMan1 clock select!\n");
case 0:
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_fman[0] = sys_info->freq_systembus / 2;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
}
#if (CONFIG_SYS_NUM_FMAN) == 2
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
#ifdef CONFIG_SYS_FM2_CLK
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
#define FM2_CLK_SEL 0x00000038
#define FM2_CLK_SHIFT 3
rcw_tmp = in_be32(&gur->rcwsr[15]);
switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) {
case 1:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK + 1];
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
case 2:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK + 1] / 2;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
case 3:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK + 1] / 3;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
case 4:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK + 1] / 4;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
powerpc/t4240: Add a frequency setting case for fman1 A new valid setting case added for fman1, it uses platform frequency. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-11-28 05:52:51 +00:00
case 5:
sys_info->freq_fman[1] = sys_info->freq_systembus;
break;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
case 6:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK] / 2;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
case 7:
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK] / 3;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
default:
printf("Error: Unknown FMan2 clock select!\n");
case 0:
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_fman[1] = sys_info->freq_systembus / 2;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
break;
}
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
#endif
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
#endif /* CONFIG_SYS_NUM_FMAN == 2 */
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
#else
sys_info->freq_fman[0] = sys_info->freq_systembus / CONFIG_SYS_FM1_CLK;
#endif
#endif
ppc/p4080: Determine various chip frequencies on CoreNet platforms The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 07:46:19 +00:00
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
powerpc/chassis2: Change core numbering scheme To align with chassis generation 2 spec, all cores are numbered in sequence. The cores may reside across multiple clusters. Each cluster has zero to four cores. The first available core is numbered as core 0. The second available core is numbered as core 1 and so on. Core clocks are generated by each clusters. To identify the cluster of each core, topology registers are examined. Cluster clock registers are reorganized to be easily indexed. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-03-25 07:40:07 +00:00
u32 c_pll_sel = (in_be32(&clk->clkcsr[cpu].clkcncsr) >> 27)
& 0xf;
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
u32 cplx_pll = core_cplx_PLL[c_pll_sel];
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_processor[cpu] =
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
}
ppc/p4080: Determine various chip frequencies on CoreNet platforms The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 07:46:19 +00:00
#define PME_CLK_SEL 0x80000000
#define FM1_CLK_SEL 0x40000000
#define FM2_CLK_SEL 0x20000000
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
#define HWA_ASYNC_DIV 0x04000000
#if (CONFIG_SYS_FSL_NUM_CC_PLLS == 2)
#define HWA_CC_PLL 1
powerpc/85xx: Add P5040 processor support Add support for the Freescale P5040 SOC, which is similar to the P5020. Features of the P5040 are: Four P5040 single-threaded e5500 cores built Up to 2.4 GHz with 64-bit ISA support Three levels of instruction: user, supervisor, hypervisor CoreNet platform cache (CPC) 2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Up to 1600MT/s Memory pre-fetch engine DPAA incorporating acceleration for the following functions Packet parsing, classification, and distribution (FMAN) Queue management for scheduling, packet sequencing and congestion management (QMAN) Hardware buffer management for buffer allocation and de-allocation (BMAN) Cryptography acceleration (SEC 5.2) at up to 40 Gbps SerDes 20 lanes at up to 5 Gbps Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces Two 10 Gbps Ethernet MACs Ten 1 Gbps Ethernet MACs High-speed peripheral interfaces Two PCI Express 2.0/3.0 controllers Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Two I2C controllers Four UARTs Integrated flash controller supporting NAND and NOR flash DMA Dual four channel Support for hardware virtualization and partitioning enforcement Extra privileged level for hypervisor support QorIQ Trust Architecture 1.1 Secure boot, secure debug, tamper detection, volatile key storage Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-05 11:09:19 +00:00
#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 3)
#define HWA_CC_PLL 2
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 4)
Minor coding style cleanup. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-05-19 20:21:41 +00:00
#define HWA_CC_PLL 2
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
#else
#error CONFIG_SYS_FSL_NUM_CC_PLLS not set or unknown case
#endif
ppc/p4080: Determine various chip frequencies on CoreNet platforms The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 07:46:19 +00:00
rcw_tmp = in_be32(&gur->rcwsr[7]);
#ifdef CONFIG_SYS_DPAA_PME
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
if (rcw_tmp & PME_CLK_SEL) {
if (rcw_tmp & HWA_ASYNC_DIV)
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_pme = freq_c_pll[HWA_CC_PLL] / 4;
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
else
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_pme = freq_c_pll[HWA_CC_PLL] / 2;
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
} else {
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_pme = sys_info->freq_systembus / 2;
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
}
ppc/p4080: Determine various chip frequencies on CoreNet platforms The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 07:46:19 +00:00
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
if (rcw_tmp & FM1_CLK_SEL) {
if (rcw_tmp & HWA_ASYNC_DIV)
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_fman[0] = freq_c_pll[HWA_CC_PLL] / 4;
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
else
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_fman[0] = freq_c_pll[HWA_CC_PLL] / 2;
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
} else {
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_fman[0] = sys_info->freq_systembus / 2;
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
}
ppc/p4080: Determine various chip frequencies on CoreNet platforms The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 07:46:19 +00:00
#if (CONFIG_SYS_NUM_FMAN) == 2
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
if (rcw_tmp & FM2_CLK_SEL) {
if (rcw_tmp & HWA_ASYNC_DIV)
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_fman[1] = freq_c_pll[HWA_CC_PLL] / 4;
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
else
powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator CHASSIS2 architecture never fix clock groups for Cluster and hardware accelerator like PME, FMA. These are SoC defined. SoC defines :- - NUM of PLLs present in the system - Clusters and their Clock group - hardware accelerator and their clock group if no clock group, then platform clock divider for FMAN, PME Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2013-09-03 05:50:15 +00:00
sys_info->freq_fman[1] = freq_c_pll[HWA_CC_PLL] / 2;
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
} else {
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_fman[1] = sys_info->freq_systembus / 2;
powerpc/85xx: Fixup determining PME, FMan freq On CoreNet based SoCs (P2040, P3041, P4080, P5020) we have some additional rules to determining the various frequencies that PME & FMan IP blocks run at. We need to take into account: * Reduced number of Core Complex PLL clusters * HWA_ASYNC_DIV (allows for /2 or /4 options) On P2040/P3041/P5020 we only have 2 Core Complex PLLs and in such SoCs the PME & FMan blocks utilize the second Core Complex PLL. On SoCs like p4080 with 4 Core Complex PLLs we utilize the third Core Complex PLL for PME & FMan blocks. On P2040/P3041/P5020 we have the added feature that we can divide the PLL down further by either /2 or /4 based on HWA_ASYNC_DIV. On P4080 this options doesn't exist, however HWA_ASYNC_DIV field in RCW should be set to 0 and this gets a backward compatiable /2 behavior. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-16 08:03:29 +00:00
}
ppc/p4080: Determine various chip frequencies on CoreNet platforms The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 07:46:19 +00:00
#endif
#endif
powerpc/85xx: add missing QMAN frequency calculation When CONFIG_SYS_FSL_QORIQ_CHASSIS2 is not defined, QMAN frequency will not be initialized, and QMAN will have a wrong frequency display. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-03-25 07:33:25 +00:00
#ifdef CONFIG_SYS_DPAA_QBMAN
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_qman = sys_info->freq_systembus / 2;
powerpc/85xx: add missing QMAN frequency calculation When CONFIG_SYS_FSL_QORIQ_CHASSIS2 is not defined, QMAN frequency will not be initialized, and QMAN will have a wrong frequency display. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-03-25 07:33:25 +00:00
#endif
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
QE/U-QE: Add U-QE support Modify code to adapt to both u-qe and qe. U_QE is a kind of cutted QE. the differences between U_QE and QE 1. UCC: U_QE supports 2 UCCs while QE supports up to 8 UCCs. 2. IMMR: have different immr base addr. 3. iopin: U_QE doesn't need to config iopin. Signed-off-by: Zhao Qiang <B45475@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-03-21 08:21:45 +00:00
#ifdef CONFIG_U_QE
sys_info->freq_qe = sys_info->freq_systembus / 2;
#endif
powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 Corenet based SoCs have different core clocks starting from Chassis generation 2. Cores are organized into clusters. Each cluster has up to 4 cores sharing same clock, which can be chosen from one of three PLLs in the cluster group with one of the devisors /1, /2 or /4. Two clusters are put together as a cluster group. These two clusters share the PLLs but may have different divisor. For example, core 0~3 are in cluster 1. Core 4~7 are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2 are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1. PME and FMan blocks can take different PLLs, configured by RCW. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:11 +00:00
#else /* CONFIG_FSL_CORENET */
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
uint plat_ratio, e500_ratio, half_freq_systembus;
Add secondary CPUs processor frequency for e500 core This patch updates e500 freqProcessor to array based on CONFIG_NUM_CPUS, and prints each CPU's frequency separately. It also fixes up each CPU's frequency in "clock-frequency" of fdt blob. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2009-01-15 16:58:35 +00:00
int i;
85xx: Add QE clk support Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Acked-by: Timur Tabi <Timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-20 16:30:29 +00:00
#ifdef CONFIG_QE
powerpc/85xx: Add P1021 specific QE and UEC support P1021 has some QE pins which need to be set in pmuxcr register before using QE functions. In this patch, pin QE0 and QE3 are set for UCC1 and UCC5 in Eth mode. QE9 and QE12 are set for MII management. QE12 needs to be released after MII access because QE12 pin is muxed with LBCTL signal. Also added relevant QE support defines unique to P1021. The P1021 QE is shared on P1012, P1016, and P1025. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-11 07:25:30 +00:00
__maybe_unused u32 qe_ratio;
85xx: Add QE clk support Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Acked-by: Timur Tabi <Timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-20 16:30:29 +00:00
#endif
* Patches by Xianghua Xiao, 15 Oct 2003: - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
2003-10-15 23:53:47 +00:00
plat_ratio = (gur->porpllsr) & 0x0000003e;
plat_ratio >>= 1;
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ;
Reworked 85xx speed detection code Changed the code to read the registers and calculate the clock rates, rather than using a "switch" statement. Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-04-23 07:37:47 +00:00
/* Divide before multiply to avoid integer
* overflow for processor speeds above 2GHz */
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
half_freq_systembus = sys_info->freq_systembus/2;
8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx The number of CPUs are getting detected dynamically by checking the processor SVR value. Also removed CONFIG_NUM_CPUS references from all the platforms with 85xx/86xx processors. This can help to use the same u-boot image across the platforms. Also revamped and corrected few Freescale Copyright messages. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-31 06:38:14 +00:00
for (i = 0; i < cpu_numcores(); i++) {
Add secondary CPUs processor frequency for e500 core This patch updates e500 freqProcessor to array based on CONFIG_NUM_CPUS, and prints each CPU's frequency separately. It also fixes up each CPU's frequency in "clock-frequency" of fdt blob. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2009-01-15 16:58:35 +00:00
e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f;
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_processor[i] = e500_ratio * half_freq_systembus;
Add secondary CPUs processor frequency for e500 core This patch updates e500 freqProcessor to array based on CONFIG_NUM_CPUS, and prints each CPU's frequency separately. It also fixes up each CPU's frequency in "clock-frequency" of fdt blob. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2009-01-15 16:58:35 +00:00
}
85xx: Speed up get_ddr_freq() and get_bus_freq() get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were called. However, get_sys_info() recalculates extraneous information when called each time. Have get_ddr_freq() and get_bus_freq() return memoized values from global_data instead. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-09 00:05:08 +00:00
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
/* Note: freq_ddrbus is the MCLK frequency, not the data rate. */
sys_info->freq_ddrbus = sys_info->freq_systembus;
Handle Asynchronous DDR clock on 85xx The MPC8572 introduces the concept of an asynchronous DDR clock with regards to the platform clock. Introduce get_ddr_freq() to report the DDR freq regardless of sync/async mode. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-07 10:59:26 +00:00
nxp: Migrate CONFIG_DDR_CLK_FREQ to Kconfig As this symbol can either be a fixed value or the function get_board_ddr_clk, migration is tricky. Introduce a choice of DYNAMIC or STATIC_DDR_CLK_FREQ. If DYNAMIC, we continue to use the board defined get_board_ddr_clk function. If STATIC, set CONFIG_DDR_CLK_FREQ to that value and now include/clock_legacy.h contains the function prototype or defines get_board_ddr_clk() to that static value. Update callers to test for DYNAMIC or STATIC. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-21 17:50:17 +00:00
#if defined(CONFIG_DYNAMIC_DDR_CLK_FREQ) || defined(CONFIG_STATIC_DDR_CLK_FREQ)
Handle Asynchronous DDR clock on 85xx The MPC8572 introduces the concept of an asynchronous DDR clock with regards to the platform clock. Introduce get_ddr_freq() to report the DDR freq regardless of sync/async mode. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-07 10:59:26 +00:00
{
Fix the incorrect DDR clk freq reporting on 8536DS On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111), The display is still sync mode DDR freq. This patch try to fix this. The display DDR freq is now the actual freq in both sync and async mode. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2008-09-27 06:40:57 +00:00
u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
Handle Asynchronous DDR clock on 85xx The MPC8572 introduces the concept of an asynchronous DDR clock with regards to the platform clock. Introduce get_ddr_freq() to report the DDR freq regardless of sync/async mode. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-07 10:59:26 +00:00
if (ddr_ratio != 0x7)
nxp: Migrate CONFIG_DDR_CLK_FREQ to Kconfig As this symbol can either be a fixed value or the function get_board_ddr_clk, migration is tricky. Introduce a choice of DYNAMIC or STATIC_DDR_CLK_FREQ. If DYNAMIC, we continue to use the board defined get_board_ddr_clk function. If STATIC, set CONFIG_DDR_CLK_FREQ to that value and now include/clock_legacy.h contains the function prototype or defines get_board_ddr_clk() to that static value. Update callers to test for DYNAMIC or STATIC. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-21 17:50:17 +00:00
sys_info->freq_ddrbus = ddr_ratio * get_board_ddr_clk();
Handle Asynchronous DDR clock on 85xx The MPC8572 introduces the concept of an asynchronous DDR clock with regards to the platform clock. Introduce get_ddr_freq() to report the DDR freq regardless of sync/async mode. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-07 10:59:26 +00:00
}
#endif
mpc8[56]xx: Put localbus clock in sysinfo and gd Currently MPC85xx and MPC86xx boards just calculate the localbus frequency and print it out, but don't save it. This changes where its calculated and stored to be more consistent with the CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock. The localbus frequency is added to sysinfo and calculated when sysinfo is set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are. get_clocks() copies the frequency into the global data, as the other frequencies are, into a new field that is only enabled for MPC85xx and MPC86xx. checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency from sysinfo, like the other frequencies, instead of calculating it on the spot. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Jon Loeliger <jdl@freescale.com>
2008-12-03 23:16:37 +00:00
85xx: Add QE clk support Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Acked-by: Timur Tabi <Timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-20 16:30:29 +00:00
#ifdef CONFIG_QE
powerpc: P1025: Remove macro CONFIG_P1025 Replace CONFIG_P1025 with ARCH_P1025 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-18 19:05:38 +00:00
#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_qe = sys_info->freq_systembus;
powerpc/85xx: Add P1021 specific QE and UEC support P1021 has some QE pins which need to be set in pmuxcr register before using QE functions. In this patch, pin QE0 and QE3 are set for UCC1 and UCC5 in Eth mode. QE9 and QE12 are set for MII management. QE12 needs to be released after MII access because QE12 pin is muxed with LBCTL signal. Also added relevant QE support defines unique to P1021. The P1021 QE is shared on P1012, P1016, and P1025. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-11 07:25:30 +00:00
#else
85xx: Add QE clk support Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Acked-by: Timur Tabi <Timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-20 16:30:29 +00:00
qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
>> MPC85xx_PORPLLSR_QE_RATIO_SHIFT;
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_qe = qe_ratio * CONFIG_SYS_CLK_FREQ;
85xx: Add QE clk support Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Acked-by: Timur Tabi <Timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-20 16:30:29 +00:00
#endif
powerpc/85xx: Add P1021 specific QE and UEC support P1021 has some QE pins which need to be set in pmuxcr register before using QE functions. In this patch, pin QE0 and QE3 are set for UCC1 and UCC5 in Eth mode. QE9 and QE12 are set for MII management. QE12 needs to be released after MII access because QE12 pin is muxed with LBCTL signal. Also added relevant QE support defines unique to P1021. The P1021 QE is shared on P1012, P1016, and P1025. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-11 07:25:30 +00:00
#endif
85xx: Add QE clk support Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Acked-by: Timur Tabi <Timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-20 16:30:29 +00:00
powerpc/85xx: Refactor Qman/Portal support to be shared between SoCs There are some differences between CoreNet (P2040, P3041, P5020, P4080) and and non-CoreNet (P1017, P1023) based SoCs in what features exist and the memory maps. * Rename various immap defines to remove _CORENET_ if they are shared * Added P1023/P1017 specific memory offsets * Only setup LIODNs or LIODN related code on CORENET based SoCs (features doesn't exist on P1023/P1017) Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-20 22:26:31 +00:00
#ifdef CONFIG_SYS_DPAA_FMAN
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
sys_info->freq_fman[0] = sys_info->freq_systembus;
powerpc/85xx: Refactor Qman/Portal support to be shared between SoCs There are some differences between CoreNet (P2040, P3041, P5020, P4080) and and non-CoreNet (P1017, P1023) based SoCs in what features exist and the memory maps. * Rename various immap defines to remove _CORENET_ if they are shared * Added P1023/P1017 specific memory offsets * Only setup LIODNs or LIODN related code on CORENET based SoCs (features doesn't exist on P1023/P1017) Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-20 22:26:31 +00:00
#endif
#endif /* CONFIG_FSL_CORENET */
powerpc/85xx: Protect all LBC code with CONFIG_FSL_LBC Future SoC (like the P1010) replace the LBC controller with the new IFC (Integrated Flash Controller) so ensure we properly protect code that is related to the LBC. Signed-off-by: Dipen Dudhat <Dipen.Dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-19 07:16:27 +00:00
#if defined(CONFIG_FSL_LBC)
arch: powerpc: update the eLBC IP input clock eLBC IP clock is always a constant divisor of platform clock pre-defined per SoC. Clock ratio register (LCRR) used in current implementation governs eLBC IP output cloc. Update sys_info->freq_localbus to represent eLBC input clock with value constant divisor of platform clock. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-02-02 09:32:00 +00:00
sys_info->freq_localbus = sys_info->freq_systembus /
CONFIG_SYS_FSL_LBC_CLK_DIV;
powerpc/85xx: Protect all LBC code with CONFIG_FSL_LBC Future SoC (like the P1010) replace the LBC controller with the new IFC (Integrated Flash Controller) so ensure we properly protect code that is related to the LBC. Signed-off-by: Dipen Dudhat <Dipen.Dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-19 07:16:27 +00:00
#endif
powerpc/85xx: Add determining and report IFC frequency Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:06 +00:00
#if defined(CONFIG_FSL_IFC)
arch: powerpc: update the IFC IP input clock IFC IP clock is always a constant divisor of platform clock pre-defined per SoC. Clock control register (CCR) used in current implementation governs IFC IP output clock. Update sys_info->freq_localbus to represent IFC input clock with value constant divisor of platform clock. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-02-02 09:31:26 +00:00
sys_info->freq_localbus = sys_info->freq_systembus /
CONFIG_SYS_FSL_IFC_CLK_DIV;
powerpc/85xx: Add determining and report IFC frequency Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:06 +00:00
#endif
* Patches by Xianghua Xiao, 15 Oct 2003: - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
2003-10-15 23:53:47 +00:00
}
common: Move clock functions into a new file These three clock functions don't use driver model and should be migrated. In the meantime, create a new file to hold them. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-28 17:44:58 +00:00
int get_clocks(void)
* Patches by Xianghua Xiao, 15 Oct 2003: - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
2003-10-15 23:53:47 +00:00
{
sys_info_t sys_info;
powerpc: MPC8544: Move CONFIG_MPC8544 to Kconfig option Replace CONFIG_MPC8544 with ARCH_MPC8544 in Kconfig. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-15 21:57:15 +00:00
#ifdef CONFIG_ARCH_MPC8544
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-16 13:01:15 +00:00
volatile ccsr_gur_t *gur = (void *) CONFIG_SYS_MPC85xx_GUTS_ADDR;
Fix calculation of I2C clock for some 85xx chips Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and some use CCB/3. There is no pattern that can be used to determine which chips use which frequency, so the only way to determine is to look up the actual SOC designation and use the right value for that SOC. Update immap_85xx.h to include the GUTS PORDEVSR2 register. Signed-off-by: Timur Tabi <timur@freescale.com>
2008-04-04 16:15:58 +00:00
#endif
* Patch by Jon Loeliger, Kumar Gala 2005-02-08 - Convert the CPM2 based functionality to use new CONFIG_CPM2 option rather than a myriad of CONFIG_MPC8560-like variants. Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560. Eliminates the CONFIG_MPC8560 option entirely. Distributes the new CONFIG_CPM2 option to each 8260 board.
2005-07-23 15:37:35 +00:00
#if defined(CONFIG_CPM2)
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-16 13:01:15 +00:00
volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
* Patches by Xianghua Xiao, 15 Oct 2003: - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
2003-10-15 23:53:47 +00:00
uint sccr, dfbrg;
/* set VCO = 4 * BRG */
Stop using immap_t for cpm offset on 85xx In the future the offsets to various blocks may not be in same location. Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers instead of getting it via &immap->im_cpm. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-28 06:36:33 +00:00
cpm->im_cpm_intctl.sccr &= 0xfffffffc;
sccr = cpm->im_cpm_intctl.sccr;
* Patches by Xianghua Xiao, 15 Oct 2003: - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
2003-10-15 23:53:47 +00:00
dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
#endif
get_sys_info (&sys_info);
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
gd->cpu_clk = sys_info.freq_processor[0];
gd->bus_clk = sys_info.freq_systembus;
gd->mem_clk = sys_info.freq_ddrbus;
gd->arch.lbc_clk = sys_info.freq_localbus;
Fix calculation of I2C clock for some 85xx chips Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and some use CCB/3. There is no pattern that can be used to determine which chips use which frequency, so the only way to determine is to look up the actual SOC designation and use the right value for that SOC. Update immap_85xx.h to include the GUTS PORDEVSR2 register. Signed-off-by: Timur Tabi <timur@freescale.com>
2008-04-04 16:15:58 +00:00
85xx: Add QE clk support Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Acked-by: Timur Tabi <Timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-20 16:30:29 +00:00
#ifdef CONFIG_QE
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
gd->arch.qe_clk = sys_info.freq_qe;
ppc: Move CONFIG_QE to arch_global_data Move the quantative easing fields into arch_global_data and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-13 20:48:50 +00:00
gd->arch.brg_clk = gd->arch.qe_clk / 2;
85xx: Add QE clk support Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Acked-by: Timur Tabi <Timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-20 16:30:29 +00:00
#endif
Fix calculation of I2C clock for some 85xx chips Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and some use CCB/3. There is no pattern that can be used to determine which chips use which frequency, so the only way to determine is to look up the actual SOC designation and use the right value for that SOC. Update immap_85xx.h to include the GUTS PORDEVSR2 register. Signed-off-by: Timur Tabi <timur@freescale.com>
2008-04-04 16:15:58 +00:00
/*
* The base clock for I2C depends on the actual SOC. Unfortunately,
* there is no pattern that can be used to determine the frequency, so
* the only choice is to look up the actual SOC number and use the value
* for that SOC. This information is taken from application note
* AN2919.
*/
ppc: Remove MPC8555CDS boards These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is the only ARCH_MPC8555 platform left, remove that support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-15 01:34:21 +00:00
#if defined(CONFIG_ARCH_MPC8540) || defined(CONFIG_ARCH_MPC8560)
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
gd->arch.i2c1_clk = sys_info.freq_systembus;
powerpc: MPC8544: Move CONFIG_MPC8544 to Kconfig option Replace CONFIG_MPC8544 with ARCH_MPC8544 in Kconfig. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-15 21:57:15 +00:00
#elif defined(CONFIG_ARCH_MPC8544)
Fix calculation of I2C clock for some 85xx chips Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and some use CCB/3. There is no pattern that can be used to determine which chips use which frequency, so the only way to determine is to look up the actual SOC designation and use the right value for that SOC. Update immap_85xx.h to include the GUTS PORDEVSR2 register. Signed-off-by: Timur Tabi <timur@freescale.com>
2008-04-04 16:15:58 +00:00
/*
* On the 8544, the I2C clock is the same as the SEC clock. This can be
* either CCB/2 or CCB/3, depending on the value of cfg_sec_freq. See
* 4.4.3.3 of the 8544 RM. Note that this might actually work for all
* 85xx, but only the 8544 has cfg_sec_freq, so it's unknown if the
* PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
*/
if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
gd->arch.i2c1_clk = sys_info.freq_systembus / 3;
Revert "85xx: Using proper I2C source clock divider for MPC8544" This reverts commit dffd2446fb041f38ef034b0fcf41e51e5e489159. The fix introduced by this patch is not correct. The problem is that the documentation is not correct for the MPC8544 with regards to which bit in PORDEVSR2 is for the SEC_CFG. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-17 02:58:49 +00:00
else
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
gd->arch.i2c1_clk = sys_info.freq_systembus / 2;
Fix calculation of I2C clock for some 85xx chips Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and some use CCB/3. There is no pattern that can be used to determine which chips use which frequency, so the only way to determine is to look up the actual SOC designation and use the right value for that SOC. Update immap_85xx.h to include the GUTS PORDEVSR2 register. Signed-off-by: Timur Tabi <timur@freescale.com>
2008-04-04 16:15:58 +00:00
#else
/* Most 85xx SOCs use CCB/2, so this is the default behavior. */
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
gd->arch.i2c1_clk = sys_info.freq_systembus / 2;
Fix calculation of I2C clock for some 85xx chips Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and some use CCB/3. There is no pattern that can be used to determine which chips use which frequency, so the only way to determine is to look up the actual SOC designation and use the right value for that SOC. Update immap_85xx.h to include the GUTS PORDEVSR2 register. Signed-off-by: Timur Tabi <timur@freescale.com>
2008-04-04 16:15:58 +00:00
#endif
ppc: m68k: Move i2c1_clk, i2c2_clk to arch_global_data Move these fields into arch_global_data and tidy up. This is needed for both ppc and m68k since they share the i2c driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-13 20:48:49 +00:00
gd->arch.i2c2_clk = gd->arch.i2c1_clk;
85xx, 86xx: Determine I2C clock frequencies and store in global_data Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx. Update the get_clocks() function in 85xx and 86xx to determine the I2C clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk. Signed-off-by: Timur Tabi <timur@freescale.com>
2008-01-09 20:35:26 +00:00
ppc/85xx: Use CONFIG_FSL_ESDHC to enable sdhc clk Enable eSDHC Clock based on generic CONFIG_FSL_ESDHC define instead of a platform define. This will enable all the 85xx platforms to use sdhc_clk based on CONFIG_FSL_ESDHC. Signed-off-by: Gao Guanhua <B22826@freescale.com> Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-01 11:57:00 +00:00
#if defined(CONFIG_FSL_ESDHC)
ppc: Remove MPC8569MDS board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. As this is the last ARCH_MPC8569 board, remove that support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-21 01:06:29 +00:00
#if defined(CONFIG_ARCH_P1010)
ppc: arm: Move sdhc_clk into arch_global_data This is used by both powerpc and arm, but I think it still qualifies as architecture-specific. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-13 20:49:05 +00:00
gd->arch.sdhc_clk = gd->bus_clk;
mpc85xx: Add eSDHC support for MPC8569E-MDS boards eSDHC is mutually exlusive with UART0 (in 4-bits mode) and I2C2 (in 1-bit mode). When eSDHC is used, we should switch u-boot console to UART1, and make the proper device-tree fixups. Because of an erratum in prototype boards it is impossible to use eSDHC without disabling UART0 (which makes it quite easy to 'brick' the board by simply issung 'setenv hwconfig esdhc', and not able to interact with U-Boot anylonger). So, but default we assume that the board is a prototype, which is a most safe assumption. There is no way to determine board revision from a register, so we use hwconfig. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-10-15 13:47:06 +00:00
#else
ppc: arm: Move sdhc_clk into arch_global_data This is used by both powerpc and arm, but I think it still qualifies as architecture-specific. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-13 20:49:05 +00:00
gd->arch.sdhc_clk = gd->bus_clk / 2;
mpc85xx: Add support for the MPC8536 The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We also have SERDES init code for the 8536. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dejan Minic <minic@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-08-12 16:14:19 +00:00
#endif
mpc85xx: Add eSDHC support for MPC8569E-MDS boards eSDHC is mutually exlusive with UART0 (in 4-bits mode) and I2C2 (in 1-bit mode). When eSDHC is used, we should switch u-boot console to UART1, and make the proper device-tree fixups. Because of an erratum in prototype boards it is impossible to use eSDHC without disabling UART0 (which makes it quite easy to 'brick' the board by simply issung 'setenv hwconfig esdhc', and not able to interact with U-Boot anylonger). So, but default we assume that the board is a prototype, which is a most safe assumption. There is no way to determine board revision from a register, so we use hwconfig. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-10-15 13:47:06 +00:00
#endif /* defined(CONFIG_FSL_ESDHC) */
mpc85xx: Add support for the MPC8536 The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We also have SERDES init code for the 8536. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dejan Minic <minic@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-08-12 16:14:19 +00:00
* Patch by Jon Loeliger, Kumar Gala 2005-02-08 - Convert the CPM2 based functionality to use new CONFIG_CPM2 option rather than a myriad of CONFIG_MPC8560-like variants. Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560. Eliminates the CONFIG_MPC8560 option entirely. Distributes the new CONFIG_CPM2 option to each 8260 board.
2005-07-23 15:37:35 +00:00
#if defined(CONFIG_CPM2)
powerpc: Fix CamelCase checkpatch warnings 85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase". Convert variables name to normal naming convention and modify board, driver files with updated the new structure. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-08-16 09:22:26 +00:00
gd->arch.vco_out = 2*sys_info.freq_systembus;
ppc: Move clock fields to arch_global_data Move vco_out, cpm_clk, scc_clk, brg_clk into arch_global_data and tidy up. Leave pci_clk on its own since this should really depend only on CONFIG_PCI and not any particular chip type. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-13 20:48:46 +00:00
gd->arch.cpm_clk = gd->arch.vco_out / 2;
gd->arch.scc_clk = gd->arch.vco_out / 4;
gd->arch.brg_clk = gd->arch.vco_out / (1 << (2 * (dfbrg + 1)));
* Patches by Xianghua Xiao, 15 Oct 2003: - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
2003-10-15 23:53:47 +00:00
#endif
if(gd->cpu_clk != 0) return (0);
else return (1);
}
/********************************************
* get_bus_freq
* return system bus freq in Hz
*********************************************/
common: Move clock functions into a new file These three clock functions don't use driver model and should be migrated. In the meantime, create a new file to hold them. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-28 17:44:58 +00:00
ulong get_bus_freq(ulong dummy)
* Patches by Xianghua Xiao, 15 Oct 2003: - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
2003-10-15 23:53:47 +00:00
{
85xx: Speed up get_ddr_freq() and get_bus_freq() get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were called. However, get_sys_info() recalculates extraneous information when called each time. Have get_ddr_freq() and get_bus_freq() return memoized values from global_data instead. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-09 00:05:08 +00:00
return gd->bus_clk;
* Patches by Xianghua Xiao, 15 Oct 2003: - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
2003-10-15 23:53:47 +00:00
}
Handle Asynchronous DDR clock on 85xx The MPC8572 introduces the concept of an asynchronous DDR clock with regards to the platform clock. Introduce get_ddr_freq() to report the DDR freq regardless of sync/async mode. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-07 10:59:26 +00:00
/********************************************
* get_ddr_freq
* return ddr bus freq in Hz
*********************************************/
ulong get_ddr_freq (ulong dummy)
{
85xx: Speed up get_ddr_freq() and get_bus_freq() get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were called. However, get_sys_info() recalculates extraneous information when called each time. Have get_ddr_freq() and get_bus_freq() return memoized values from global_data instead. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-09 00:05:08 +00:00
return gd->mem_clk;
Handle Asynchronous DDR clock on 85xx The MPC8572 introduces the concept of an asynchronous DDR clock with regards to the platform clock. Introduce get_ddr_freq() to report the DDR freq regardless of sync/async mode. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-07 10:59:26 +00:00
}
Reference in a new issue Copy permalink