u-boot/arch/arm/mach-imx/imx8m/Kconfig

299 lines
6.3 KiB
Text
Raw Normal View History

if ARCH_IMX8M
config IMX8M
bool
select HAS_CAAM
select ROM_UNIFIED_SECTIONS
config IMX8MQ
bool
select IMX8M
select CLK_IMX8MQ
config IMX8MM
bool
select IMX8M
config IMX8MN
bool
select IMX8M
config IMX8MP
bool
select IMX8M
config SYS_SOC
default "imx8m"
choice
prompt "NXP i.MX8M board select"
optional
config TARGET_IMX8MQ_CM
bool "Ronetix iMX8MQ-CM SoM"
select BINMAN
select IMX8MQ
select IMX8M_LPDDR4
config TARGET_IMX8MQ_EVK
bool "imx8mq_evk"
select BINMAN
select IMX8MQ
select IMX8M_LPDDR4
select FSL_CAAM
select ARCH_MISC_INIT
select SPL_CRYPTO if SPL
config TARGET_IMX8MQ_PHANBELL
bool "imx8mq_phanbell"
select BINMAN
select IMX8MQ
select IMX8M_LPDDR4
config TARGET_IMX8MM_DATA_MODUL_EDM_SBC
bool "Data Modul eDM SBC i.MX8M Mini"
select BINMAN
select IMX8MM
select IMX8M_LPDDR4
select SUPPORT_SPL
config TARGET_IMX8MM_EVK
bool "imx8mm LPDDR4 EVK board"
select BINMAN
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
select FSL_CAAM
select ARCH_MISC_INIT
select SPL_CRYPTO if SPL
config TARGET_IMX8MM_ICORE_MX8MM
bool "Engicam i.Core MX8M Mini SOM"
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
help
i.Core MX8M Mini is an EDIMM SOM based on NXP i.MX8MM.
i.Core MX8M Mini EDIMM2.2:
* EDIMM2.2 is a Form Factor Capacitive Evaluation Board.
* i.Core MX8M Mini needs to mount on top of EDIMM2.2 for
creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit.
i.Core MX8M Mini C.TOUCH 2.0
* C.TOUCH 2.0 is a general purpose Carrier board.
* i.Core MX8M Mini needs to mount on top of this Carrier board
for creating complete i.Core MX8M Mini C.TOUCH 2.0 board.
config TARGET_IMX8MM_MX8MENLO
bool "Support i.MX8M Mini MX8Menlo board based on Toradex Verdin SoM"
select BINMAN
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_IMX8MM_VENICE
bool "Support Gateworks Venice iMX8M Mini module"
select BINMAN
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
select GATEWORKS_SC
select MISC
config TARGET_KONTRON_MX8MM
bool "Kontron Electronics N80xx"
select BINMAN
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
select FSL_CAAM
select ARCH_MISC_INIT
select SPL_CRYPTO if SPL
config TARGET_IMX8MN_BSH_SMM_S2
bool "imx8mn-bsh-smm-s2"
select BINMAN
select IMX8MN
select SUPPORT_SPL
select IMX8M_DDR3L
config TARGET_IMX8MN_BSH_SMM_S2PRO
bool "imx8mn-bsh-smm-s2pro"
select BINMAN
select IMX8MN
select SUPPORT_SPL
select IMX8M_DDR3L
config TARGET_IMX8MN_EVK
bool "imx8mn LPDDR4 EVK board"
select BINMAN
select IMX8MN
select SUPPORT_SPL
select IMX8M_LPDDR4
select FSL_CAAM
select SPL_CRYPTO if SPL
config TARGET_IMX8MN_DDR4_EVK
bool "imx8mn DDR4 EVK board"
select BINMAN
select IMX8MN
select SUPPORT_SPL
select IMX8M_DDR4
select FSL_CAAM
select SPL_CRYPTO if SPL
config TARGET_IMX8MN_VENICE
bool "Support Gateworks Venice iMX8M Nano module"
select BINMAN
select IMX8MN
select SUPPORT_SPL
select IMX8M_LPDDR4
select GATEWORKS_SC
select MISC
config TARGET_IMX8MP_DH_DHCOM_PDK2
bool "DH electronics DHCOM Premium Developer Kit (2) i.MX8M Plus"
select BINMAN
select IMX8MP
select IMX8M_LPDDR4
select SUPPORT_SPL
config TARGET_IMX8MP_EVK
bool "imx8mp LPDDR4 EVK board"
select BINMAN
select IMX8MP
select SUPPORT_SPL
select IMX8M_LPDDR4
select FSL_CAAM
select ARCH_MISC_INIT
select SPL_CRYPTO if SPL
config TARGET_IMX8MP_VENICE
bool "Support Gateworks Venice iMX8M Plus module"
select BINMAN
select IMX8MP
select SUPPORT_SPL
select IMX8M_LPDDR4
select GATEWORKS_SC
select MISC
config TARGET_PICO_IMX8MQ
bool "Support Technexion Pico iMX8MQ"
select BINMAN
select IMX8MQ
select IMX8M_LPDDR4
config TARGET_IMX8MN_VAR_SOM
bool "imx8mn_var_som"
select BINMAN
select IMX8MN
select SUPPORT_SPL
select IMX8M_DDR4
config TARGET_KONTRON_PITX_IMX8M
bool "Support Kontron pITX-imx8m"
select BINMAN
select IMX8MQ
select IMX8M_LPDDR4
board: toradex: Add Verdin iMX8M Mini support This adds initial minimal support for the Toradex Verdin iMX8M Mini Quad 2GB WB IT V1.0A module. They are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Mini USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) Normal Boot Trying to boot from MMC1 NOTICE: Configuring TZASC380 NOTICE: RDC off NOTICE: BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty NOTICE: BL31: Built : 01:11:41, Jan 25 2020 NOTICE: sip svc init U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz Reset cause: POR DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial# 06535149 Net: eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-01-28 13:42:25 +00:00
config TARGET_VERDIN_IMX8MM
bool "Support Toradex Verdin iMX8M Mini module"
select BINMAN
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
board: toradex: Add Verdin iMX8M Mini support This adds initial minimal support for the Toradex Verdin iMX8M Mini Quad 2GB WB IT V1.0A module. They are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Mini USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) Normal Boot Trying to boot from MMC1 NOTICE: Configuring TZASC380 NOTICE: RDC off NOTICE: BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty NOTICE: BL31: Built : 01:11:41, Jan 25 2020 NOTICE: sip svc init U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz Reset cause: POR DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial# 06535149 Net: eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-01-28 13:42:25 +00:00
board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
config TARGET_VERDIN_IMX8MP
bool "Support Toradex Verdin iMX8M Plus module"
select BINMAN
select IMX8MP
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_IMX8MM_BEACON
bool "imx8mm Beacon Embedded devkit"
select BINMAN
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_IMX8MN_BEACON
bool "imx8mn Beacon Embedded devkit"
select BINMAN
select IMX8MN
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_PHYCORE_IMX8MM
bool "PHYTEC PHYCORE i.MX8MM"
select BINMAN
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_PHYCORE_IMX8MP
bool "PHYTEC PHYCORE i.MX8MP"
select BINMAN
select IMX8MP
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_IMX8MM_CL_IOT_GATE
bool "CompuLab iot-gate-imx8"
select BINMAN
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
select SUPPORT_EXTENSION_SCAN
config TARGET_IMX8MM_CL_IOT_GATE_OPTEE
bool "CompuLab iot-gate-imx8 with optee support"
select BINMAN
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
select SUPPORT_EXTENSION_SCAN
config TARGET_IMX8MP_RSB3720A1_4G
bool "Support i.MX8MP RSB3720A1 4G"
select BINMAN
select IMX8MP
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_IMX8MP_RSB3720A1_6G
bool "Support i.MX8MP RSB3720A1 6G"
select BINMAN
select IMX8MP
select SUPPORT_SPL
select IMX8M_LPDDR4
endchoice
source "board/advantech/imx8mp_rsb3720a1/Kconfig"
source "board/beacon/imx8mm/Kconfig"
source "board/beacon/imx8mn/Kconfig"
source "board/bsh/imx8mn_smm_s2/Kconfig"
source "board/compulab/imx8mm-cl-iot-gate/Kconfig"
source "board/data_modul/imx8mm_edm_sbc/Kconfig"
source "board/dhelectronics/dh_imx8mp/Kconfig"
source "board/engicam/imx8mm/Kconfig"
source "board/freescale/imx8mq_evk/Kconfig"
source "board/freescale/imx8mm_evk/Kconfig"
source "board/freescale/imx8mn_evk/Kconfig"
source "board/freescale/imx8mp_evk/Kconfig"
source "board/gateworks/venice/Kconfig"
source "board/google/imx8mq_phanbell/Kconfig"
source "board/kontron/pitx_imx8m/Kconfig"
source "board/kontron/sl-mx8mm/Kconfig"
source "board/menlo/mx8menlo/Kconfig"
source "board/phytec/phycore_imx8mm/Kconfig"
source "board/phytec/phycore_imx8mp/Kconfig"
source "board/ronetix/imx8mq-cm/Kconfig"
source "board/technexion/pico-imx8mq/Kconfig"
source "board/variscite/imx8mn_var_som/Kconfig"
source "board/toradex/verdin-imx8mm/Kconfig"
board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
source "board/toradex/verdin-imx8mp/Kconfig"
endif