u-boot/arch/arm/mach-imx/imx8m/Kconfig

160 lines
3.4 KiB
Text
Raw Normal View History

if ARCH_IMX8M
config IMX8M
bool
select HAS_CAAM
select ROM_UNIFIED_SECTIONS
config IMX8MQ
bool
select IMX8M
config IMX8MM
bool
select IMX8M
config IMX8MN
bool
select IMX8M
config IMX8MP
bool
select IMX8M
config SYS_SOC
default "imx8m"
choice
prompt "NXP i.MX8M board select"
optional
config TARGET_IMX8MQ_CM
bool "Ronetix iMX8MQ-CM SoM"
select BINMAN
select IMX8MQ
select IMX8M_LPDDR4
config TARGET_IMX8MQ_EVK
bool "imx8mq_evk"
select IMX8MQ
select IMX8M_LPDDR4
config TARGET_IMX8MQ_PHANBELL
bool "imx8mq_phanbell"
select IMX8MQ
select IMX8M_LPDDR4
config TARGET_IMX8MM_EVK
bool "imx8mm LPDDR4 EVK board"
select BINMAN
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_IMX8MM_ICORE_MX8MM
bool "Engicam i.Core MX8M Mini SOM"
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
help
i.Core MX8M Mini is an EDIMM SOM based on NXP i.MX8MM.
i.Core MX8M Mini EDIMM2.2:
* EDIMM2.2 is a Form Factor Capacitive Evaluation Board.
* i.Core MX8M Mini needs to mount on top of EDIMM2.2 for
creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit.
i.Core MX8M Mini C.TOUCH 2.0
* C.TOUCH 2.0 is a general purpose Carrier board.
* i.Core MX8M Mini needs to mount on top of this Carrier board
for creating complete i.Core MX8M Mini C.TOUCH 2.0 board.
config TARGET_IMX8MM_VENICE
bool "Support Gateworks Venice iMX8M Mini module"
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_IMX8MN_EVK
bool "imx8mn LPDDR4 EVK board"
select BINMAN
select IMX8MN
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_IMX8MN_DDR4_EVK
bool "imx8mn DDR4 EVK board"
select BINMAN
select IMX8MN
select SUPPORT_SPL
select IMX8M_DDR4
config TARGET_IMX8MP_EVK
bool "imx8mp LPDDR4 EVK board"
select BINMAN
select IMX8MP
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_PICO_IMX8MQ
bool "Support Technexion Pico iMX8MQ"
select IMX8MQ
select IMX8M_LPDDR4
board: toradex: Add Verdin iMX8M Mini support This adds initial minimal support for the Toradex Verdin iMX8M Mini Quad 2GB WB IT V1.0A module. They are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Mini USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) Normal Boot Trying to boot from MMC1 NOTICE: Configuring TZASC380 NOTICE: RDC off NOTICE: BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty NOTICE: BL31: Built : 01:11:41, Jan 25 2020 NOTICE: sip svc init U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz Reset cause: POR DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial# 06535149 Net: eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-01-28 13:42:25 +00:00
config TARGET_VERDIN_IMX8MM
bool "Support Toradex Verdin iMX8M Mini module"
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_IMX8MM_BEACON
bool "imx8mm Beacon Embedded devkit"
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_IMX8MN_BEACON
bool "imx8mn Beacon Embedded devkit"
select IMX8MN
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_PHYCORE_IMX8MM
bool "PHYTEC PHYCORE i.MX8MM"
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_PHYCORE_IMX8MP
bool "PHYTEC PHYCORE i.MX8MP"
select BINMAN
select IMX8MP
select SUPPORT_SPL
select IMX8M_LPDDR4
config TARGET_IMX8MM_CL_IOT_GATE
bool "CompuLab iot-gate-imx8"
select BINMAN
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
endchoice
source "board/beacon/imx8mm/Kconfig"
source "board/beacon/imx8mn/Kconfig"
source "board/compulab/imx8mm-cl-iot-gate/Kconfig"
source "board/engicam/imx8mm/Kconfig"
source "board/freescale/imx8mq_evk/Kconfig"
source "board/freescale/imx8mm_evk/Kconfig"
source "board/freescale/imx8mn_evk/Kconfig"
source "board/freescale/imx8mp_evk/Kconfig"
source "board/gateworks/venice/Kconfig"
source "board/google/imx8mq_phanbell/Kconfig"
source "board/phytec/phycore_imx8mm/Kconfig"
source "board/phytec/phycore_imx8mp/Kconfig"
source "board/ronetix/imx8mq-cm/Kconfig"
source "board/technexion/pico-imx8mq/Kconfig"
source "board/toradex/verdin-imx8mm/Kconfig"
endif