u-boot/drivers/Makefile

127 lines
3.5 KiB
Makefile
Raw Normal View History

# SPDX-License-Identifier: GPL-2.0+
obj-$(CONFIG_$(SPL_TPL_)BLK) += block/
obj-$(CONFIG_$(SPL_TPL_)BOOTCOUNT_LIMIT) += bootcount/
obj-$(CONFIG_$(SPL_TPL_)BUTTON) += button/
obj-$(CONFIG_$(SPL_TPL_)CACHE) += cache/
obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
obj-$(CONFIG_$(SPL_TPL_)DM) += core/
obj-$(CONFIG_$(SPL_TPL_)DMA) += dma/
obj-$(CONFIG_$(SPL_TPL_)DMA_LEGACY) += dma/
obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/
obj-$(CONFIG_$(SPL_TPL_)GPIO) += gpio/
obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC) += misc/
obj-$(CONFIG_$(SPL_TPL_)SYSRESET) += sysreset/
obj-$(CONFIG_$(SPL_TPL_)FIRMWARE) +=firmware/
obj-$(CONFIG_$(SPL_TPL_)I2C) += i2c/
obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/
obj-$(CONFIG_$(SPL_TPL_)LED) += led/
obj-$(CONFIG_$(SPL_TPL_)MMC) += mmc/
obj-y += mtd/
obj-$(CONFIG_$(SPL_)MULTIPLEXER) += mux/
obj-$(CONFIG_$(SPL_TPL_)ETH) += net/
obj-$(CONFIG_$(SPL_TPL_)PCH) += pch/
obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/
obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
obj-$(CONFIG_$(SPL_TPL_)POWER) += power/
obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
obj-$(CONFIG_$(SPL_TPL_)RTC) += rtc/
obj-$(CONFIG_$(SPL_TPL_)SERIAL) += serial/
obj-$(CONFIG_$(SPL_TPL_)SPI) += spi/
obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
obj-$(CONFIG_$(SPL_TPL_)VIRTIO) += virtio/
obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/
obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/
obj-$(CONFIG_$(SPL_)SYSINFO) += sysinfo/
obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/
obj-$(CONFIG_XEN) += xen/
obj-$(CONFIG_$(SPL_)FPGA) += fpga/
obj-y += bus/
ifndef CONFIG_TPL_BUILD
ifndef CONFIG_VPL_BUILD
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_CPU) += cpu/
obj-$(CONFIG_SPL_CRYPTO) += crypto/
obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR) += ddr/fsl/
obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
obj-$(CONFIG_$(SPL_)ALTERA_SDRAM) += ddr/altera/
obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/
obj-$(CONFIG_IMX8ULP_DRAM) += ddr/imx/imx8ulp/
obj-$(CONFIG_ARCH_IMX9) += ddr/imx/imx9/
obj-$(CONFIG_SPL_DM_RESET) += reset/
obj-$(CONFIG_SPL_MUSB_NEW) += usb/musb-new/
obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/
obj-$(CONFIG_SPL_USB_GADGET) += usb/common/
obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/
obj-$(CONFIG_SPL_WATCHDOG) += watchdog/
obj-$(CONFIG_SPL_USB_HOST) += usb/host/
obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
obj-$(CONFIG_SPL_SATA) += ata/ scsi/
obj-$(CONFIG_SPL_LEGACY_BLOCK) += block/
obj-$(CONFIG_SPL_THERMAL) += thermal/
endif
endif
endif
ifdef CONFIG_TPL_BUILD
obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR) += ddr/fsl/
endif
ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
dm: adc: add simple ADC uclass implementation This commit adds: - new uclass id: UCLASS_ADC - new uclass driver: drivers/adc/adc-uclass.c The new uclass's API allows for ADC operation on: * single-channel with channel selection by a number * multti-channel with channel selection by bit mask ADC uclass's functions: * single-channel: - adc_start_channel() - start channel conversion - adc_channel_data() - get conversion data - adc_channel_single_shot() - start/get conversion data * multi-channel: - adc_start_channels() - start selected channels conversion - adc_channels_data() - get conversion data - adc_channels_single_shot() - start/get conversion data for channels selected by bit mask * general: - adc_stop() - stop the conversion - adc_vdd_value() - positive reference Voltage value with polarity [uV] - adc_vss_value() - negative reference Voltage value with polarity [uV] - adc_data_mask() - conversion data bit mask The device tree can provide below constraints/properties: - vdd-polarity-negative: if true: Vdd = vdd-microvolts * (-1) - vss-polarity-negative: if true: Vss = vss-microvolts * (-1) - vdd-supply: phandle to Vdd regulator's node - vss-supply: phandle to Vss regulator's node And optional, checked only if the above corresponding, doesn't exist: - vdd-microvolts: positive reference Voltage [uV] - vss-microvolts: negative reference Voltage [uV] Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-27 12:08:00 +00:00
obj-y += adc/
obj-y += ata/
obj-$(CONFIG_DM_DEMO) += demo/
obj-$(CONFIG_BIOSEMU) += bios_emulator/
obj-y += block/
obj-y += cache/
obj-$(CONFIG_CPU) += cpu/
obj-y += crypto/
obj-$(CONFIG_FASTBOOT) += fastboot/
obj-$(CONFIG_FWU_MDATA) += fwu-mdata/
obj-y += misc/
obj-$(CONFIG_MMC) += mmc/
obj-$(CONFIG_NVME) += nvme/
obj-$(CONFIG_PCI_ENDPOINT) += pci_endpoint/
obj-y += dfu/
obj-$(CONFIG_PCH) += pch/
obj-$(CONFIG_DM_REBOOT_MODE) += reboot-mode/
obj-y += rtc/
obj-y += scsi/
obj-y += sound/
obj-y += spmi/
obj-y += video/
obj-y += watchdog/
obj-$(CONFIG_QE) += qe/
obj-$(CONFIG_U_QE) += qe/
obj-y += mailbox/
obj-y += memory/
obj-y += mtd/
obj-y += pwm/
obj-y += reset/
obj-y += input/
obj-y += iommu/
# SOC specific infrastructure drivers.
obj-y += smem/
obj-y += thermal/
obj-$(CONFIG_TEE) += tee/
obj-y += axi/
obj-y += ufs/
obj-$(CONFIG_W1) += w1/
obj-$(CONFIG_W1_EEPROM) += w1-eeprom/
obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
obj-$(CONFIG_FUZZ) += fuzz/
obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock/
obj-$(CONFIG_DM_RNG) += rng/
endif
obj-y += soc/