ddr: altera: Compile ALTERA SDRAM in SPL only

Compile ALTERA_SDRAM driver in SPL only.
Rename ALTERA_SDRAM to SPL_ALTERA_SDRAM.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
This commit is contained in:
Ley Foon Tan 2019-05-06 09:55:59 +08:00 committed by Marek Vasut
parent 86f578ee85
commit 5918afda9d
7 changed files with 10 additions and 8 deletions

View file

@ -713,7 +713,7 @@ libs-y += drivers/spi/
libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
libs-y += drivers/serial/
libs-y += drivers/usb/dwc3/
libs-y += drivers/usb/common/

View file

@ -26,7 +26,7 @@ config TARGET_SOCFPGA_ARRIA5
config TARGET_SOCFPGA_ARRIA10
bool
select ALTERA_SDRAM
select SPL_ALTERA_SDRAM
select SPL_BOARD_INIT if SPL
select CLK
select SPL_CLK if SPL
@ -47,7 +47,7 @@ config TARGET_SOCFPGA_CYCLONE5
config TARGET_SOCFPGA_GEN5
bool
select ALTERA_SDRAM
select SPL_ALTERA_SDRAM
imply FPGA_SOCFPGA
imply SPL_STACK_R
imply SPL_SYS_MALLOC_SIMPLE

View file

@ -34,7 +34,7 @@ obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
obj-$(CONFIG_$(SPL_)ALTERA_SDRAM) += ddr/altera/
obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/

View file

@ -1,5 +1,6 @@
config ALTERA_SDRAM
bool "SoCFPGA DDR SDRAM driver"
config SPL_ALTERA_SDRAM
bool "SoCFPGA DDR SDRAM driver in SPL"
depends on SPL
depends on TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
select RAM if TARGET_SOCFPGA_GEN5
select SPL_RAM if TARGET_SOCFPGA_GEN5

View file

@ -6,7 +6,7 @@
# (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
# Copyright (C) 2014 Altera Corporation <www.altera.com>
ifdef CONFIG_ALTERA_SDRAM
ifdef CONFIG_$(SPL_)ALTERA_SDRAM
obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += sdram_gen5.o sequencer.o
obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += sdram_arria10.o
obj-$(CONFIG_TARGET_SOCFPGA_STRATIX10) += sdram_s10.o

View file

@ -132,7 +132,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
/*
* SDRAM controller
*/
#define CONFIG_ALTERA_SDRAM
#define CONFIG_SPL_ALTERA_SDRAM
/*
* Serial / UART configurations

View file

@ -1824,6 +1824,7 @@ CONFIG_SPLASH_SCREEN_ALIGN
CONFIG_SPLASH_SOURCE
CONFIG_SPLL_FREQ
CONFIG_SPL_
CONFIG_SPL_ALTERA_SDRAM
CONFIG_SPL_ATMEL_SIZE
CONFIG_SPL_BOARD_LOAD_IMAGE
CONFIG_SPL_BOOTROM_SAVE