Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-07 13:44:29 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/x86/cpu/ivybridge/sdram.c

559 lines
16 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
// SPDX-License-Identifier: GPL-2.0
x86: Add chromebook_link board This board is a 'bare' version of the existing 'link 'board. It does not require coreboot to run, but is intended to start directly from the reset vector. This initial commit has place holders for a wide range of features. These will be added in follow-on patches and series. So far it cannot be booted as there is no ROM image produced, but it does build without errors. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:07 +00:00
/*
* Copyright (c) 2011 The Chromium OS Authors.
* (C) Copyright 2010,2011
* Graeme Russ, <graeme.russ@gmail.com>
*
* Portions from Coreboot mainboard/google/link/romstage.c
* Copyright (C) 2007-2010 coresystems GmbH
* Copyright (C) 2011 Google Inc.
*/
#include <common.h>
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
#include <errno.h>
#include <fdtdec.h>
#include <malloc.h>
x86: Implement a cache for Memory Reference Code parameters The memory reference code takes a very long time to 'train' its SDRAM interface, around half a second. To avoid this delay on every boot we can store the parameters from the last training sessions to speed up the next. Add an implementation of this, storing the training data in CMOS RAM and SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-20 05:16:14 +00:00
#include <net.h>
#include <rtc.h>
#include <spi.h>
#include <spi_flash.h>
x86: Set up a shared syscon numbering schema Each system controller can have a number to identify it. It can then be accessed using syscon_get_by_driver_data(). Put this in a shared header file and update the only current user. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:58 +00:00
#include <syscon.h>
x86: Switch to use DM sysreset driver This converts all x86 boards over to DM sysreset. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-07-19 10:07:33 +00:00
#include <sysreset.h>
x86: Set up a shared syscon numbering schema Each system controller can have a number to identify it. It can then be accessed using syscon_get_by_driver_data(). Put this in a shared header file and update the only current user. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:58 +00:00
#include <asm/cpu.h>
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
#include <asm/processor.h>
#include <asm/gpio.h>
#include <asm/global_data.h>
x86: Create a common header for Intel register access There are several blocks of registers that are accessed from all over the code on Intel CPUs. These don't currently have their own driver and it is not clear whether having a driver makes sense. An example is the Memory Controller Hub (MCH). We map it to a known location on some Intel chips (mostly those without FSP - Firmware Support Package). Add a new header file for these registers, and move MCH into it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-12 05:06:55 +00:00
#include <asm/intel_regs.h>
x86: Move mrccache.[c|h] to a common place mrccache implementation can be common for all boards. Move it from ivybridge cpu directory to the common lib directory. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-12 04:37:36 +00:00
#include <asm/mrccache.h>
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
#include <asm/mrc_common.h>
x86: ivybridge: Request MTRRs for DRAM regions We should use MTRRs to speed up execution. Add a list of MTRR requests which will dealt with when we relocate and run from RAM. We set RAM as cacheable (with write-back) and registers as non-cacheable. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-01 23:18:10 +00:00
#include <asm/mtrr.h>
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
#include <asm/pci.h>
x86: Move Intel Management Engine code to a common place Some of the Intel ME code is common to several Intel CPUs. Move it into a common location. Add a header file for report_platform.c also. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [squashed in http://patchwork.ozlabs.org/patch/598372/] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-12 05:07:00 +00:00
#include <asm/report_platform.h>
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
#include <asm/arch/me.h>
#include <asm/arch/pei_data.h>
#include <asm/arch/pch.h>
#include <asm/post.h>
#include <asm/arch/sandybridge.h>
DECLARE_GLOBAL_DATA_PTR;
x86: Implement a cache for Memory Reference Code parameters The memory reference code takes a very long time to 'train' its SDRAM interface, around half a second. To avoid this delay on every boot we can store the parameters from the last training sessions to speed up the next. Add an implementation of this, storing the training data in CMOS RAM and SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-20 05:16:14 +00:00
#define CMOS_OFFSET_MRC_SEED 152
#define CMOS_OFFSET_MRC_SEED_S3 156
#define CMOS_OFFSET_MRC_SEED_CHK 160
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
ulong board_get_usable_ram_top(ulong total_size)
{
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
return mrc_common_board_get_usable_ram_top(total_size);
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
}
board_f: Drop setup_dram_config() wrapper By making dram_init_banksize() return an error code we can drop the wrapper. Adjust this and clean up all implementations. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2017-03-31 14:40:32 +00:00
int dram_init_banksize(void)
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
{
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
mrc_common_dram_init_banksize();
board_f: Drop setup_dram_config() wrapper By making dram_init_banksize() return an error code we can drop the wrapper. Adjust this and clean up all implementations. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2017-03-31 14:40:32 +00:00
return 0;
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
}
x86: Implement a cache for Memory Reference Code parameters The memory reference code takes a very long time to 'train' its SDRAM interface, around half a second. To avoid this delay on every boot we can store the parameters from the last training sessions to speed up the next. Add an implementation of this, storing the training data in CMOS RAM and SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-20 05:16:14 +00:00
static int read_seed_from_cmos(struct pei_data *pei_data)
{
u16 c1, c2, checksum, seed_checksum;
x86: Enable DM RTC support for all x86 boards Add a RTC node in the device tree to enable DM RTC support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> (Squashed in 'x86: Fix RTC build error on ivybridge')
2015-07-15 08:23:39 +00:00
struct udevice *dev;
x86: ivybridge: Use 'ret' instead of 'rcode' For consistency, use 'ret' to handle a return value. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-18 21:55:32 +00:00
int ret = 0;
x86: Enable DM RTC support for all x86 boards Add a RTC node in the device tree to enable DM RTC support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> (Squashed in 'x86: Fix RTC build error on ivybridge')
2015-07-15 08:23:39 +00:00
x86: ivybridge: Use 'ret' instead of 'rcode' For consistency, use 'ret' to handle a return value. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-18 21:55:32 +00:00
ret = uclass_get_device(UCLASS_RTC, 0, &dev);
if (ret) {
debug("Cannot find RTC: err=%d\n", ret);
x86: Enable DM RTC support for all x86 boards Add a RTC node in the device tree to enable DM RTC support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> (Squashed in 'x86: Fix RTC build error on ivybridge')
2015-07-15 08:23:39 +00:00
return -ENODEV;
}
x86: Implement a cache for Memory Reference Code parameters The memory reference code takes a very long time to 'train' its SDRAM interface, around half a second. To avoid this delay on every boot we can store the parameters from the last training sessions to speed up the next. Add an implementation of this, storing the training data in CMOS RAM and SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-20 05:16:14 +00:00
/*
* Read scrambler seeds from CMOS RAM. We don't want to store them in
* SPI flash since they change on every boot and that would wear down
* the flash too much. So we store these in CMOS and the large MRC
* data in SPI flash.
*/
x86: ivybridge: Check the RTC return value The RTC can fail, so check the return value for reads. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-18 21:55:33 +00:00
ret = rtc_read32(dev, CMOS_OFFSET_MRC_SEED, &pei_data->scrambler_seed);
if (!ret) {
ret = rtc_read32(dev, CMOS_OFFSET_MRC_SEED_S3,
&pei_data->scrambler_seed_s3);
}
if (ret) {
debug("Failed to read from RTC %s\n", dev->name);
return ret;
}
x86: Implement a cache for Memory Reference Code parameters The memory reference code takes a very long time to 'train' its SDRAM interface, around half a second. To avoid this delay on every boot we can store the parameters from the last training sessions to speed up the next. Add an implementation of this, storing the training data in CMOS RAM and SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-20 05:16:14 +00:00
debug("Read scrambler seed 0x%08x from CMOS 0x%02x\n",
pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED);
debug("Read S3 scrambler seed 0x%08x from CMOS 0x%02x\n",
pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3);
/* Compute seed checksum and compare */
c1 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed,
sizeof(u32));
c2 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed_s3,
sizeof(u32));
checksum = add_ip_checksums(sizeof(u32), c1, c2);
x86: Enable DM RTC support for all x86 boards Add a RTC node in the device tree to enable DM RTC support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> (Squashed in 'x86: Fix RTC build error on ivybridge')
2015-07-15 08:23:39 +00:00
seed_checksum = rtc_read8(dev, CMOS_OFFSET_MRC_SEED_CHK);
seed_checksum |= rtc_read8(dev, CMOS_OFFSET_MRC_SEED_CHK + 1) << 8;
x86: Implement a cache for Memory Reference Code parameters The memory reference code takes a very long time to 'train' its SDRAM interface, around half a second. To avoid this delay on every boot we can store the parameters from the last training sessions to speed up the next. Add an implementation of this, storing the training data in CMOS RAM and SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-20 05:16:14 +00:00
if (checksum != seed_checksum) {
debug("%s: invalid seed checksum\n", __func__);
pei_data->scrambler_seed = 0;
pei_data->scrambler_seed_s3 = 0;
return -EINVAL;
}
return 0;
}
static int prepare_mrc_cache(struct pei_data *pei_data)
{
struct mrc_data_container *mrc_cache;
x86: Use struct mrc_region to describe a mrc region Currently struct fmap_entry is used to describe a mrc region. However this structure contains some other fields that are not related to mrc cache and causes confusion. Besides, it does not include a base address field to store SPI flash's base address. Instead in the mrccache.c it tries to use CONFIG_ROM_SIZE to calculate the SPI flash base address, which unfortunately is not 100% correct as CONFIG_ROM_SIZE may not match the whole SPI flash size. Define a new struct mrc_region and use it instead. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-12 04:37:41 +00:00
struct mrc_region entry;
x86: Implement a cache for Memory Reference Code parameters The memory reference code takes a very long time to 'train' its SDRAM interface, around half a second. To avoid this delay on every boot we can store the parameters from the last training sessions to speed up the next. Add an implementation of this, storing the training data in CMOS RAM and SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-20 05:16:14 +00:00
int ret;
ret = read_seed_from_cmos(pei_data);
if (ret)
return ret;
x86: ivybridge: Use APIs provided in the mrccache lib Remove the call to custom mrc cache APIs, and use the ones provided in the mrccache lib. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-12 04:37:40 +00:00
ret = mrccache_get_region(NULL, &entry);
x86: Implement a cache for Memory Reference Code parameters The memory reference code takes a very long time to 'train' its SDRAM interface, around half a second. To avoid this delay on every boot we can store the parameters from the last training sessions to speed up the next. Add an implementation of this, storing the training data in CMOS RAM and SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-20 05:16:14 +00:00
if (ret)
return ret;
mrc_cache = mrccache_find_current(&entry);
if (!mrc_cache)
return -ENOENT;
x86: ivybridge: Enable the MRC cache This works correctly now, so enable it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Dropped malloc() and adjusted commit message: Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-18 21:55:37 +00:00
pei_data->mrc_input = mrc_cache->data;
pei_data->mrc_input_len = mrc_cache->data_size;
x86: Implement a cache for Memory Reference Code parameters The memory reference code takes a very long time to 'train' its SDRAM interface, around half a second. To avoid this delay on every boot we can store the parameters from the last training sessions to speed up the next. Add an implementation of this, storing the training data in CMOS RAM and SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-20 05:16:14 +00:00
debug("%s: at %p, size %x checksum %04x\n", __func__,
pei_data->mrc_input, pei_data->mrc_input_len,
mrc_cache->checksum);
return 0;
}
static int write_seeds_to_cmos(struct pei_data *pei_data)
{
u16 c1, c2, checksum;
x86: Enable DM RTC support for all x86 boards Add a RTC node in the device tree to enable DM RTC support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> (Squashed in 'x86: Fix RTC build error on ivybridge')
2015-07-15 08:23:39 +00:00
struct udevice *dev;
x86: ivybridge: Use 'ret' instead of 'rcode' For consistency, use 'ret' to handle a return value. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-18 21:55:32 +00:00
int ret = 0;
x86: Enable DM RTC support for all x86 boards Add a RTC node in the device tree to enable DM RTC support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> (Squashed in 'x86: Fix RTC build error on ivybridge')
2015-07-15 08:23:39 +00:00
x86: ivybridge: Use 'ret' instead of 'rcode' For consistency, use 'ret' to handle a return value. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-18 21:55:32 +00:00
ret = uclass_get_device(UCLASS_RTC, 0, &dev);
if (ret) {
debug("Cannot find RTC: err=%d\n", ret);
x86: Enable DM RTC support for all x86 boards Add a RTC node in the device tree to enable DM RTC support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> (Squashed in 'x86: Fix RTC build error on ivybridge')
2015-07-15 08:23:39 +00:00
return -ENODEV;
}
x86: Implement a cache for Memory Reference Code parameters The memory reference code takes a very long time to 'train' its SDRAM interface, around half a second. To avoid this delay on every boot we can store the parameters from the last training sessions to speed up the next. Add an implementation of this, storing the training data in CMOS RAM and SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-20 05:16:14 +00:00
/* Save the MRC seed values to CMOS */
x86: Enable DM RTC support for all x86 boards Add a RTC node in the device tree to enable DM RTC support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> (Squashed in 'x86: Fix RTC build error on ivybridge')
2015-07-15 08:23:39 +00:00
rtc_write32(dev, CMOS_OFFSET_MRC_SEED, pei_data->scrambler_seed);
x86: Implement a cache for Memory Reference Code parameters The memory reference code takes a very long time to 'train' its SDRAM interface, around half a second. To avoid this delay on every boot we can store the parameters from the last training sessions to speed up the next. Add an implementation of this, storing the training data in CMOS RAM and SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-20 05:16:14 +00:00
debug("Save scrambler seed 0x%08x to CMOS 0x%02x\n",
pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED);
x86: Enable DM RTC support for all x86 boards Add a RTC node in the device tree to enable DM RTC support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> (Squashed in 'x86: Fix RTC build error on ivybridge')
2015-07-15 08:23:39 +00:00
rtc_write32(dev, CMOS_OFFSET_MRC_SEED_S3, pei_data->scrambler_seed_s3);
x86: Implement a cache for Memory Reference Code parameters The memory reference code takes a very long time to 'train' its SDRAM interface, around half a second. To avoid this delay on every boot we can store the parameters from the last training sessions to speed up the next. Add an implementation of this, storing the training data in CMOS RAM and SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-20 05:16:14 +00:00
debug("Save s3 scrambler seed 0x%08x to CMOS 0x%02x\n",
pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3);
/* Save a simple checksum of the seed values */
c1 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed,
sizeof(u32));
c2 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed_s3,
sizeof(u32));
checksum = add_ip_checksums(sizeof(u32), c1, c2);
x86: Enable DM RTC support for all x86 boards Add a RTC node in the device tree to enable DM RTC support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> (Squashed in 'x86: Fix RTC build error on ivybridge')
2015-07-15 08:23:39 +00:00
rtc_write8(dev, CMOS_OFFSET_MRC_SEED_CHK, checksum & 0xff);
rtc_write8(dev, CMOS_OFFSET_MRC_SEED_CHK + 1, (checksum >> 8) & 0xff);
x86: Implement a cache for Memory Reference Code parameters The memory reference code takes a very long time to 'train' its SDRAM interface, around half a second. To avoid this delay on every boot we can store the parameters from the last training sessions to speed up the next. Add an implementation of this, storing the training data in CMOS RAM and SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-20 05:16:14 +00:00
return 0;
}
/* Use this hook to save our SDRAM parameters */
int misc_init_r(void)
{
int ret;
x86: ivybridge: Use APIs provided in the mrccache lib Remove the call to custom mrc cache APIs, and use the ones provided in the mrccache lib. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-12 04:37:40 +00:00
ret = mrccache_save();
x86: Implement a cache for Memory Reference Code parameters The memory reference code takes a very long time to 'train' its SDRAM interface, around half a second. To avoid this delay on every boot we can store the parameters from the last training sessions to speed up the next. Add an implementation of this, storing the training data in CMOS RAM and SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-20 05:16:14 +00:00
if (ret)
printf("Unable to save MRC data: %d\n", ret);
return 0;
}
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
static void post_system_agent_init(struct udevice *dev, struct udevice *me_dev,
struct pei_data *pei_data)
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
{
uint16_t done;
/*
* Send ME init done for SandyBridge here. This is done inside the
* SystemAgent binary on IvyBridge
*/
x86: ivybridge: Convert sdram_initialise() to use DM PCI API Convert this function to use the the driver model PCI API. We just need to pass in the northbridge device. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:48 +00:00
dm_pci_read_config16(dev, PCI_DEVICE_ID, &done);
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
done &= BASE_REV_MASK;
if (BASE_REV_SNB == done)
x86: ivybridge: Convert SDRAM init to use driver model SDRAM init needs access to the Northbridge controller and the Intel Management Engine device. Add the latter to the device tree and convert all of this code to driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:50 +00:00
intel_early_me_init_done(dev, me_dev, ME_INIT_STATUS_SUCCESS);
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
else
x86: Move Intel Management Engine code to a common place Some of the Intel ME code is common to several Intel CPUs. Move it into a common location. Add a header file for report_platform.c also. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [squashed in http://patchwork.ozlabs.org/patch/598372/] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-12 05:07:00 +00:00
intel_me_status(me_dev);
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
/* If PCIe init is skipped, set the PEG clock gating */
if (!pei_data->pcie_init)
setbits_le32(MCHBAR_REG(0x7010), 1);
}
x86: Implement a cache for Memory Reference Code parameters The memory reference code takes a very long time to 'train' its SDRAM interface, around half a second. To avoid this delay on every boot we can store the parameters from the last training sessions to speed up the next. Add an implementation of this, storing the training data in CMOS RAM and SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-20 05:16:14 +00:00
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
static int recovery_mode_enabled(void)
{
return false;
x86: Implement a cache for Memory Reference Code parameters The memory reference code takes a very long time to 'train' its SDRAM interface, around half a second. To avoid this delay on every boot we can store the parameters from the last training sessions to speed up the next. Add an implementation of this, storing the training data in CMOS RAM and SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-20 05:16:14 +00:00
}
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
static int copy_spd(struct udevice *dev, struct pei_data *peid)
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
{
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
const void *data;
int ret;
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
ret = mrc_locate_spd(dev, sizeof(peid->spd_data[0]), &data);
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
if (ret) {
debug("%s: Could not locate SPD (ret=%d)\n", __func__, ret);
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
return ret;
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
}
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
memcpy(peid->spd_data[0], data, sizeof(peid->spd_data[0]));
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
return 0;
}
/**
* sdram_find() - Find available memory
*
* This is a bit complicated since on x86 there are system memory holes all
* over the place. We create a list of available memory blocks
x86: ivybridge: Convert dram_init() to use DM PCI API Convert the top part of the DRAM init to use the driver model PCI API. Further work will complete the transformation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:47 +00:00
*
* @dev: Northbridge device
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
*/
x86: ivybridge: Convert dram_init() to use DM PCI API Convert the top part of the DRAM init to use the driver model PCI API. Further work will complete the transformation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:47 +00:00
static int sdram_find(struct udevice *dev)
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
{
struct memory_info *info = &gd->arch.meminfo;
uint32_t tseg_base, uma_size, tolud;
uint64_t tom, me_base, touud;
uint64_t uma_memory_base = 0;
unsigned long long tomk;
uint16_t ggc;
x86: ivybridge: Convert dram_init() to use DM PCI API Convert the top part of the DRAM init to use the driver model PCI API. Further work will complete the transformation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:47 +00:00
u32 val;
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
/* Total Memory 2GB example:
*
* 00000000 0000MB-1992MB 1992MB RAM (writeback)
* 7c800000 1992MB-2000MB 8MB TSEG (SMRR)
* 7d000000 2000MB-2002MB 2MB GFX GTT (uncached)
* 7d200000 2002MB-2034MB 32MB GFX UMA (uncached)
* 7f200000 2034MB TOLUD
* 7f800000 2040MB MEBASE
* 7f800000 2040MB-2048MB 8MB ME UMA (uncached)
* 80000000 2048MB TOM
* 100000000 4096MB-4102MB 6MB RAM (writeback)
*
* Total Memory 4GB example:
*
* 00000000 0000MB-2768MB 2768MB RAM (writeback)
* ad000000 2768MB-2776MB 8MB TSEG (SMRR)
* ad800000 2776MB-2778MB 2MB GFX GTT (uncached)
* ada00000 2778MB-2810MB 32MB GFX UMA (uncached)
* afa00000 2810MB TOLUD
* ff800000 4088MB MEBASE
* ff800000 4088MB-4096MB 8MB ME UMA (uncached)
* 100000000 4096MB TOM
* 100000000 4096MB-5374MB 1278MB RAM (writeback)
* 14fe00000 5368MB TOUUD
*/
/* Top of Upper Usable DRAM, including remap */
x86: ivybridge: Convert dram_init() to use DM PCI API Convert the top part of the DRAM init to use the driver model PCI API. Further work will complete the transformation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:47 +00:00
dm_pci_read_config32(dev, TOUUD + 4, &val);
touud = (uint64_t)val << 32;
dm_pci_read_config32(dev, TOUUD, &val);
touud |= val;
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
/* Top of Lower Usable DRAM */
x86: ivybridge: Convert dram_init() to use DM PCI API Convert the top part of the DRAM init to use the driver model PCI API. Further work will complete the transformation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:47 +00:00
dm_pci_read_config32(dev, TOLUD, &tolud);
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
/* Top of Memory - does not account for any UMA */
x86: ivybridge: Convert dram_init() to use DM PCI API Convert the top part of the DRAM init to use the driver model PCI API. Further work will complete the transformation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:47 +00:00
dm_pci_read_config32(dev, 0xa4, &val);
tom = (uint64_t)val << 32;
dm_pci_read_config32(dev, 0xa0, &val);
tom |= val;
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
debug("TOUUD %llx TOLUD %08x TOM %llx\n", touud, tolud, tom);
/* ME UMA needs excluding if total memory <4GB */
x86: ivybridge: Convert dram_init() to use DM PCI API Convert the top part of the DRAM init to use the driver model PCI API. Further work will complete the transformation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:47 +00:00
dm_pci_read_config32(dev, 0x74, &val);
me_base = (uint64_t)val << 32;
dm_pci_read_config32(dev, 0x70, &val);
me_base |= val;
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
debug("MEBASE %llx\n", me_base);
/* TODO: Get rid of all this shifting by 10 bits */
tomk = tolud >> 10;
if (me_base == tolud) {
/* ME is from MEBASE-TOM */
uma_size = (tom - me_base) >> 10;
/* Increment TOLUD to account for ME as RAM */
tolud += uma_size << 10;
/* UMA starts at old TOLUD */
uma_memory_base = tomk * 1024ULL;
debug("ME UMA base %llx size %uM\n", me_base, uma_size >> 10);
}
/* Graphics memory comes next */
x86: ivybridge: Convert dram_init() to use DM PCI API Convert the top part of the DRAM init to use the driver model PCI API. Further work will complete the transformation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:47 +00:00
dm_pci_read_config16(dev, GGC, &ggc);
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
if (!(ggc & 2)) {
debug("IGD decoded, subtracting ");
/* Graphics memory */
uma_size = ((ggc >> 3) & 0x1f) * 32 * 1024ULL;
debug("%uM UMA", uma_size >> 10);
tomk -= uma_size;
uma_memory_base = tomk * 1024ULL;
/* GTT Graphics Stolen Memory Size (GGMS) */
uma_size = ((ggc >> 8) & 0x3) * 1024ULL;
tomk -= uma_size;
uma_memory_base = tomk * 1024ULL;
debug(" and %uM GTT\n", uma_size >> 10);
}
/* Calculate TSEG size from its base which must be below GTT */
x86: ivybridge: Convert dram_init() to use DM PCI API Convert the top part of the DRAM init to use the driver model PCI API. Further work will complete the transformation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:47 +00:00
dm_pci_read_config32(dev, 0xb8, &tseg_base);
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
uma_size = (uma_memory_base - tseg_base) >> 10;
tomk -= uma_size;
uma_memory_base = tomk * 1024ULL;
debug("TSEG base 0x%08x size %uM\n", tseg_base, uma_size >> 10);
debug("Available memory below 4GB: %lluM\n", tomk >> 10);
/* Report the memory regions */
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
mrc_add_memory_area(info, 1 << 20, 2 << 28);
mrc_add_memory_area(info, (2 << 28) + (2 << 20), 4 << 28);
mrc_add_memory_area(info, (4 << 28) + (2 << 20), tseg_base);
mrc_add_memory_area(info, 1ULL << 32, touud);
x86: ivybridge: Request MTRRs for DRAM regions We should use MTRRs to speed up execution. Add a list of MTRR requests which will dealt with when we relocate and run from RAM. We set RAM as cacheable (with write-back) and registers as non-cacheable. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-01 23:18:10 +00:00
/* Add MTRRs for memory */
mtrr_add_request(MTRR_TYPE_WRBACK, 0, 2ULL << 30);
mtrr_add_request(MTRR_TYPE_WRBACK, 2ULL << 30, 512 << 20);
mtrr_add_request(MTRR_TYPE_WRBACK, 0xaULL << 28, 256 << 20);
mtrr_add_request(MTRR_TYPE_UNCACHEABLE, tseg_base, 16 << 20);
mtrr_add_request(MTRR_TYPE_UNCACHEABLE, tseg_base + (16 << 20),
32 << 20);
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
/*
* If >= 4GB installed then memory from TOLUD to 4GB
* is remapped above TOM, TOUUD will account for both
*/
if (touud > (1ULL << 32ULL)) {
debug("Available memory above 4GB: %lluM\n",
(touud >> 20) - 4096);
}
return 0;
}
static void rcba_config(void)
{
/*
* GFX INTA -> PIRQA (MSI)
* D28IP_P3IP WLAN INTA -> PIRQB
* D29IP_E1P EHCI1 INTA -> PIRQD
* D26IP_E2P EHCI2 INTA -> PIRQF
* D31IP_SIP SATA INTA -> PIRQF (MSI)
* D31IP_SMIP SMBUS INTB -> PIRQH
* D31IP_TTIP THRT INTC -> PIRQA
* D27IP_ZIP HDA INTA -> PIRQA (MSI)
*
* TRACKPAD -> PIRQE (Edge Triggered)
* TOUCHSCREEN -> PIRQG (Edge Triggered)
*/
/* Device interrupt pin register (board specific) */
writel((INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
(INTB << D31IP_SMIP) | (INTA << D31IP_SIP), RCB_REG(D31IP));
writel(NOINT << D30IP_PIP, RCB_REG(D30IP));
writel(INTA << D29IP_E1P, RCB_REG(D29IP));
writel(INTA << D28IP_P3IP, RCB_REG(D28IP));
writel(INTA << D27IP_ZIP, RCB_REG(D27IP));
writel(INTA << D26IP_E2P, RCB_REG(D26IP));
writel(NOINT << D25IP_LIP, RCB_REG(D25IP));
writel(NOINT << D22IP_MEI1IP, RCB_REG(D22IP));
/* Device interrupt route registers */
writel(DIR_ROUTE(PIRQB, PIRQH, PIRQA, PIRQC), RCB_REG(D31IR));
writel(DIR_ROUTE(PIRQD, PIRQE, PIRQF, PIRQG), RCB_REG(D29IR));
writel(DIR_ROUTE(PIRQB, PIRQC, PIRQD, PIRQE), RCB_REG(D28IR));
writel(DIR_ROUTE(PIRQA, PIRQH, PIRQA, PIRQB), RCB_REG(D27IR));
writel(DIR_ROUTE(PIRQF, PIRQE, PIRQG, PIRQH), RCB_REG(D26IR));
writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D25IR));
writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D22IR));
/* Enable IOAPIC (generic) */
writew(0x0100, RCB_REG(OIC));
/* PCH BWG says to read back the IOAPIC enable register */
(void)readw(RCB_REG(OIC));
/* Disable unused devices (board specific) */
setbits_le32(RCB_REG(FD), PCH_DISABLE_ALWAYS);
}
x86: Add chromebook_link board This board is a 'bare' version of the existing 'link 'board. It does not require coreboot to run, but is intended to start directly from the reset vector. This initial commit has place holders for a wide range of features. These will be added in follow-on patches and series. So far it cannot be booted as there is no ROM image produced, but it does build without errors. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:07 +00:00
int dram_init(void)
{
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
struct pei_data _pei_data __aligned(8) = {
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
.pei_version = PEI_VERSION,
x86: Create a common header for Intel register access There are several blocks of registers that are accessed from all over the code on Intel CPUs. These don't currently have their own driver and it is not clear whether having a driver makes sense. An example is the Memory Controller Hub (MCH). We map it to a known location on some Intel chips (mostly those without FSP - Firmware Support Package). Add a new header file for these registers, and move MCH into it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-12 05:06:55 +00:00
.mchbar = MCH_BASE_ADDRESS,
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
.dmibar = DEFAULT_DMIBAR,
.epbar = DEFAULT_EPBAR,
x86: Rename MMCONF_BASE_ADDRESS and make it common across x86 This setting will be used by more than just ivybridge so make it common. Also rename it to PCIE_ECAM_BASE which is a more descriptive name. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-28 05:13:33 +00:00
.pciexbar = CONFIG_PCIE_ECAM_BASE,
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
.smbusbar = SMBUS_IO_BASE,
.wdbbar = 0x4000000,
.wdbsize = 0x1000,
.hpet_address = CONFIG_HPET_ADDRESS,
.rcba = DEFAULT_RCBABASE,
.pmbase = DEFAULT_PMBASE,
.gpiobase = DEFAULT_GPIOBASE,
.thermalbase = 0xfed08000,
.system_type = 0, /* 0 Mobile, 1 Desktop/Server */
.tseg_size = CONFIG_SMM_TSEG_SIZE,
.ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
.ec_present = 1,
.ddr3lv_support = 1,
/*
* 0 = leave channel enabled
* 1 = disable dimm 0 on channel
* 2 = disable dimm 1 on channel
* 3 = disable dimm 0+1 on channel
*/
.dimm_channel0_disabled = 2,
.dimm_channel1_disabled = 2,
.max_ddr3_freq = 1600,
.usb_port_config = {
/*
* Empty and onboard Ports 0-7, set to un-used pin
* OC3
*/
{ 0, 3, 0x0000 }, /* P0= Empty */
{ 1, 0, 0x0040 }, /* P1= Left USB 1 (OC0) */
{ 1, 1, 0x0040 }, /* P2= Left USB 2 (OC1) */
{ 1, 3, 0x0040 }, /* P3= SDCARD (no OC) */
{ 0, 3, 0x0000 }, /* P4= Empty */
{ 1, 3, 0x0040 }, /* P5= WWAN (no OC) */
{ 0, 3, 0x0000 }, /* P6= Empty */
{ 0, 3, 0x0000 }, /* P7= Empty */
/*
* Empty and onboard Ports 8-13, set to un-used pin
* OC4
*/
{ 1, 4, 0x0040 }, /* P8= Camera (no OC) */
{ 1, 4, 0x0040 }, /* P9= Bluetooth (no OC) */
{ 0, 4, 0x0000 }, /* P10= Empty */
{ 0, 4, 0x0000 }, /* P11= Empty */
{ 0, 4, 0x0000 }, /* P12= Empty */
{ 0, 4, 0x0000 }, /* P13= Empty */
},
};
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
struct pei_data *pei_data = &_pei_data;
x86: ivybridge: Convert SDRAM init to use driver model SDRAM init needs access to the Northbridge controller and the Intel Management Engine device. Add the latter to the device tree and convert all of this code to driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:50 +00:00
struct udevice *dev, *me_dev;
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
int ret;
x86: link: Correct a failure in DRAM init With the change to set up pinctrl after relocation, link fails to boot. Add a special case in the link code to handle this. Fixes: d8906c1f (x86: Probe pinctrl driver in cpu_init_r()) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-07-11 15:30:55 +00:00
/* We need the pinctrl set up early */
ret = syscon_get_by_driver_data(X86_SYSCON_PINCONF, &dev);
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
if (ret) {
debug("%s: Could not get pinconf (ret=%d)\n", __func__, ret);
x86: link: Correct a failure in DRAM init With the change to set up pinctrl after relocation, link fails to boot. Add a special case in the link code to handle this. Fixes: d8906c1f (x86: Probe pinctrl driver in cpu_init_r()) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-07-11 15:30:55 +00:00
return ret;
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
}
x86: link: Correct a failure in DRAM init With the change to set up pinctrl after relocation, link fails to boot. Add a special case in the link code to handle this. Fixes: d8906c1f (x86: Probe pinctrl driver in cpu_init_r()) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-07-11 15:30:55 +00:00
dm: Use uclass_first_device_err() where it is useful Use this new function in places where it simplifies the code. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-11 20:23:26 +00:00
ret = uclass_first_device_err(UCLASS_NORTHBRIDGE, &dev);
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
if (ret) {
debug("%s: Could not get northbridge (ret=%d)\n", __func__,
ret);
x86: ivybridge: Convert sdram_initialise() to use DM PCI API Convert this function to use the the driver model PCI API. We just need to pass in the northbridge device. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:48 +00:00
return ret;
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
}
x86: Set up a shared syscon numbering schema Each system controller can have a number to identify it. It can then be accessed using syscon_get_by_driver_data(). Put this in a shared header file and update the only current user. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:58 +00:00
ret = syscon_get_by_driver_data(X86_SYSCON_ME, &me_dev);
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
if (ret) {
debug("%s: Could not get ME (ret=%d)\n", __func__, ret);
x86: ivybridge: Convert SDRAM init to use driver model SDRAM init needs access to the Northbridge controller and the Intel Management Engine device. Add the latter to the device tree and convert all of this code to driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:50 +00:00
return ret;
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
}
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
ret = copy_spd(dev, pei_data);
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
if (ret) {
debug("%s: Could not get SPD (ret=%d)\n", __func__, ret);
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
return ret;
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
}
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
pei_data->boot_mode = gd->arch.pei_boot_mode;
debug("Boot mode %d\n", gd->arch.pei_boot_mode);
debug("mrc_input %p\n", pei_data->mrc_input);
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
/*
* Do not pass MRC data in for recovery mode boot,
* Always pass it in for S3 resume.
*/
if (!recovery_mode_enabled() ||
pei_data->boot_mode == PEI_BOOT_RESUME) {
ret = prepare_mrc_cache(pei_data);
if (ret)
debug("prepare_mrc_cache failed: %d\n", ret);
}
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
/* If MRC data is not found we cannot continue S3 resume. */
if (pei_data->boot_mode == PEI_BOOT_RESUME && !pei_data->mrc_input) {
debug("Giving up in sdram_initialize: No MRC data\n");
x86: Switch to use DM sysreset driver This converts all x86 boards over to DM sysreset. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-07-19 10:07:33 +00:00
sysreset_walk_halt(SYSRESET_COLD);
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
}
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
/* Pass console handler in pei_data */
pei_data->tx_byte = sdram_console_tx_byte;
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
/* Wait for ME to be ready */
ret = intel_early_me_init(me_dev);
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
if (ret) {
debug("%s: Could not init ME (ret=%d)\n", __func__, ret);
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
return ret;
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
}
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
ret = intel_early_me_uma_size(me_dev);
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
if (ret < 0) {
debug("%s: Could not get UMA size (ret=%d)\n", __func__, ret);
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
return ret;
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
}
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
ret = mrc_common_init(dev, pei_data, false);
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
if (ret) {
debug("%s: mrc_common_init() failed (ret=%d)\n", __func__, ret);
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
return ret;
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
}
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
ret = sdram_find(dev);
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
if (ret) {
debug("%s: sdram_find() failed (ret=%d)\n", __func__, ret);
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
return ret;
x86: ivybridge: Add more debugging for failures Add various debug() messages in places where errors occur. This aids with debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:38 +00:00
}
x86: ivybridge: Implement SDRAM init Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:28 +00:00
gd->ram_size = gd->arch.meminfo.total_32bit_memory;
x86: Add chromebook_link board This board is a 'bare' version of the existing 'link 'board. It does not require coreboot to run, but is intended to start directly from the reset vector. This initial commit has place holders for a wide range of features. These will be added in follow-on patches and series. So far it cannot be booted as there is no ROM image produced, but it does build without errors. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:07 +00:00
x86: ivybridge: Convert to use the common SDRAM code Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-16 13:44:38 +00:00
debug("MRC output data length %#x at %p\n", pei_data->mrc_output_len,
pei_data->mrc_output);
post_system_agent_init(dev, me_dev, pei_data);
report_memory_config();
/* S3 resume: don't save scrambler seed or MRC data */
if (pei_data->boot_mode != PEI_BOOT_RESUME) {
/*
* This will be copied to SDRAM in reserve_arch(), then written
* to SPI flash in mrccache_save()
*/
gd->arch.mrc_output = (char *)pei_data->mrc_output;
gd->arch.mrc_output_len = pei_data->mrc_output_len;
ret = write_seeds_to_cmos(pei_data);
if (ret)
debug("Failed to write seeds to CMOS: %d\n", ret);
}
writew(0xCAFE, MCHBAR_REG(SSKPD));
if (ret)
return ret;
rcba_config();
x86: Add chromebook_link board This board is a 'bare' version of the existing 'link 'board. It does not require coreboot to run, but is intended to start directly from the reset vector. This initial commit has place holders for a wide range of features. These will be added in follow-on patches and series. So far it cannot be booted as there is no ROM image produced, but it does build without errors. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-13 05:42:07 +00:00
return 0;
}
Reference in a new issue Copy permalink