Corrects the float_equality_without_abs lint
Fixes an issue in the `float_equality_without_abs` lint. The lint suggestion was configured in a way that it lints the whole error and not just the subtraction part. In the current configuration the lint would suggest to change the expression in a wrong way, e.g.
```rust
let _ = (a - b) < f32::EPSILON; // before
let _ = (a - b).abs(); // after
```
This was dicovered by @flip1995. (See discussion of PR #5952).
Also the suggestion is now formatted via `utils::sugg`.
changelog: none
Fix `let_and_return` bad suggestion
Add a cast to the suggestion when the return expression has adjustments.
These adjustments are lost when the suggestion is applied.
This is similar to the problem in issue #4437.
Closes#5729
changelog: Fix `let_and_return` bad suggestion
Fix fp in `borrow_interior_mutable_const`
fixes#5796
changelog: fix false positive in `borrow_interior_mutable_const` when referencing a field behind a pointer.
Fix incorrect suggestion when `clone_on_ref_ptr` is triggered in macros
In the lint `clone_on_ref_ptr`, if the `span` is in a macro, don't expand it for suggestion.
Fixes: #2076
changelog: none
r? @ebroto
Add a cast to the suggestion when the return expression has adjustments.
These adjustments are lost when the suggestion is applied.
This is similar to the problem in issue #4437.
Closes#5729
Don't lint if it has always inline attribute
Don't trigger the lint `trivially_copy_pass_by_ref` if it has `#[inline(always)]` attribute.
Note: I am not particularly familiar with `inline` impacts, so I implemented this the way that if only `#[inline]` attribute is here (without `always`), the lint will still trigger. Also, it will still trigger if it has `#[inline(never)]`.
Just tell me if it sounds too much conservative.
Fixes: #5876
changelog: none
Prelude imports are exempt from wildcard import warnings. Until now only
imports of the form
```
use ...::prelude::*;
```
were considered. This change makes it so that the segment `prelude` can
show up anywhere, for instance:
```
use ...::prelude::v1::*;
```
Fixes#5917
Fix false positive in `PRECEDENCE` lint
Extend the lint to handle chains of methods combined with unary negation.
Closes#5924
changelog: Fix false negative in `PRECEDENCE` lint
Warn about assignments where left-hand side place expression is the same
as right-hand side value expression. For example, warn about assignment in:
```rust
pub struct Event {
id: usize,
x: i32,
y: i32,
}
pub fn copy_position(a: &mut Event, b: &Event) {
a.x = b.x;
a.y = a.y;
}
```
should_impl_trait - ignore methods with lifetime params
Fixes: #5617
changelog: don't lint should_implement_trait when an `Iterator::next` case has explicit parameters
Fix: keep parenthesis for suggestion in `useless_conversion` lint
Note: this lint was previously named `identity_conversion`.
fixes: #4750
changelog: fix parenthesis for `useless_conversion` lint suggestion
Add the other overloadable operations to suspicious_arithmetic_impl
In #2268 I idly mused that the other user-overloadable operations could be added to this lint. Knowing that the lint was arguably incomplete was gnawing at the back of my mind, so I figured that I might as well make this PR, particularly given the change needed was so small.
changelog: Start warning on suspicious implementations of the `BitAnd`, `BitOr`, `BitXor`, `Rem`, `Shl`, and `Shr` traits.
make a bunch of lints texts adhere to rustc dev guide
According to the rustc-dev guide: "The text should be matter of fact and avoid capitalization and periods, unless multiple sentences are needed"
changelog: make some lint output adhere to the rustc-dev guide
enable #[allow(clippy::unsafe_derive_deserialize)]
Before this change this lint could not be allowed as the code we are checking is automatically generated.
changelog: Enable using the `allow` attribute on top of an ADT linted by [`unsafe_derive_deserialize`].
Fixes: #5789
Fix ICE in `loops` module
changelog: Fix ICE related to `needless_collect` when a call to `iter()` was not present.
I went for restoring the old suggestion of `next().is_some()` over `get(0).is_some()` given that `iter()` is not necessarily present (could be e.g. `into_iter()` or `iter_mut()`) and that the old suggestion could change semantics, e.g. a call to `filter()` could be present between `iter()` and the collect part.
Fixes#5872
Check whether locals are too large instead of whether accesses into them are too large
Essentially this stops const prop from attempting to optimize
```rust
let mut x = [0_u8; 5000];
x[42] = 3;
```
I don't expect this to be a perf improvement without #73656 (which is also where the lack of this PR will be a perf regression).
r? @wesleywiser
try_err: Consider Try impl for Poll when generating suggestions
There are two different implementation of `Try` trait for `Poll` type:
`Poll<Result<T, E>>` and `Poll<Option<Result<T, E>>>`. Take them into
account when generating suggestions.
For example, for `Err(e)?` suggest either `return Poll::Ready(Err(e))` or
`return Poll::Ready(Some(Err(e)))` as appropriate.
Fixes#5855
changelog: try_err: Consider Try impl for Poll when generating suggestions
Add derive_ord_xor_partial_ord lint
Fix#1621
Some remarks:
This PR follows the example of the analogous derive_hash_xor_partial_eq lint where possible.
I initially tried using the `match_path` function to identify `Ord` implementation like the derive_hash_xor_partial_eq lint currently does, for `Hash` implementations but that didn't work.
Specifically, the structs at the top level were getting paths that matched `&["$crate", "cmp", "Ord"]` instead of `&["std", "cmp", "Ord"]`. While trying to figure out what to do instead I saw the comment at the top of [clippy_lints/src/utils/paths.rs](f5d429cd76/clippy_lints/src/utils/paths.rs (L5)) that mentioned [this issue](https://github.com/rust-lang/rust-clippy/issues/5393) and suggested to use diagnostic items instead of hardcoded paths whenever possible. I looked for a way to identify `Ord` implementations with diagnostic items, but (possibly because this was the first time I had heard of diagnostic items,) I was unable to find one.
Eventually I tried using `get_trait_def_id` and comparing `DefId` values directly and that seems to work as expected. Maybe there's a better approach however?
changelog: new lint: derive_ord_xor_partial_ord
Handle mapping to Option in `map_flatten` lint
Fixes#4496
The existing [`map_flatten`](https://rust-lang.github.io/rust-clippy/master/index.html#map_flatten) lint suggests changing `expr.map(...).flatten()` to `expr.flat_map(...)` when `expr` is `Iterator`. This PR changes suggestion to `filter_map` instead of `flat_map` when mapping to `Option`, because it is more natural
Also here are some questions:
* If expression has type which implements `Iterator` trait (`match_trait_method(cx, expr, &paths::ITERATOR) == true`), how can I get type of iterator elements? Currently I use return type of closure inside `map`, but probably it is not good way
* I would like to change suggestion range to cover only `.map(...).flatten()`, that is from:
```
let _: Vec<_> = vec![5_i8; 6].into_iter().map(|x| 0..x).flatten().collect();
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try using `flat_map` instead: `vec![5_i8; 6].into_iter().flat_map
```
to
```
let _: Vec<_> = vec![5_i8; 6].into_iter().map(|x| 0..x).flatten().collect();
^^^^^^^^^^^^^^^^^^^^^^^^ help: try using `flat_map` instead: `.flat_map(|x| 0..x)`
```
Is it ok?
* Is `map_flatten` lint intentionally in `pedantic` category, or could it be moved to `complexity`?
changelog: Handle mapping to Option in [`map_flatten`](https://rust-lang.github.io/rust-clippy/master/index.html#map_flatten) lint
needless_collect: catch x: Vec<_> = iter.collect(); x.into_iter() ...
changelog: Expand the needless_collect lint as suggested in #5627 (WIP).
This PR is WIP because I can't figure out how to make the multi-part suggestion include its changes in the source code (the fixed is identical to the source, despite the lint making suggestions). Aside from that one issue, I think this should be good.
There are two different implementation of Try trait for Poll type;
Poll<Result<T, E>> and Poll<Option<Result<T, E>>>. Take them into
account when generating suggestions.
For example, for Err(e)? suggest either return Poll::Ready(Err(e)) or
return Poll::Ready(Some(Err(e))) as appropriate.
The reason we do not trigger these lints anymore is that clippy sets the mir-opt-level to 0, and the recent changes subtly changed how the const propagator works.
Fix FP for `suspicious_arithmetic_impl` from `suspicious_trait_impl` …
As discussed in #3215, the `suspicious_trait_impl` lint causes too many false positives, as it is complex to find out if binary operations are suspicious or not.
This PR restricts the number of binary operations to at most one, otherwise we don't lint.
This can be seen as very conservative, but at least FP can be reduced to bare minimum.
Fixes: #3215
changelog: limit the `suspicious_arithmetic_impl` lint to one binop, to avoid many FPs
Ignore not really redundant clones of ManuallyDrop
"Redundant" clones of `ManuallyDrop` are sometimes used for the side effect of
invoking the clone, without running the drop implementation of the inner type.
In other words, they aren't really redundant. For example, futures-rs crate:
```rust
#[allow(clippy::redundant_clone)] // The clone here isn't actually redundant.
unsafe fn increase_refcount<T: ArcWake>(data: *const ()) {
// Retain Arc, but don't touch refcount by wrapping in ManuallyDrop
let arc = mem::ManuallyDrop::new(Arc::<T>::from_raw(data as *const T));
// Now increase refcount, but don't drop new refcount either
let _arc_clone: mem::ManuallyDrop<_> = arc.clone();
}
```
changelog: Ignore redundant clone lint for ManuallyDrop.
"Redundant" clones of `ManuallyDrop` are sometimes used for the side effect of
invoking the clone, without running the drop implementation of the inner type.
In other words, they aren't really redundant. For example, futures-rs crate:
```rust
#[allow(clippy::redundant_clone)] // The clone here isn't actually redundant.
unsafe fn increase_refcount<T: ArcWake>(data: *const ()) {
// Retain Arc, but don't touch refcount by wrapping in ManuallyDrop
let arc = mem::ManuallyDrop::new(Arc::<T>::from_raw(data as *const T));
// Now increase refcount, but don't drop new refcount either
let _arc_clone: mem::ManuallyDrop<_> = arc.clone();
}
```
Ignore redundant clone lint for ManuallyDrop.
Panic multiple args
changelog: Fixes bug with `panic` lint reported in #5767. I also did the same changes to the lints for `todo`, `unimplemented` and `unreachable`, so those lints should now also detect calls to those macros with a message.
improve advice in iter_nth_zero
fixes#5783
*Please keep the line below*
changelog: For iter_nth_zero, the "use .next()" replacement advice is on the last line of the code snippet, where it is vulnerable to truncation. Display that advice at the beginning instead.
This lint catches cases where the last statement of a closure expecting
an instance of Ord has a trailing semi-colon. It compiles since the
closure ends up return () which also implements Ord but causes
unexpected results in cases such as sort_by_key.
Fixes#5080
reprise: rebase, update and address all concerns
Rename collapsable_if fix suggestion to "collapse nested if block"
The name "try" is confusing when shown as quick fix by rust-analyzer
changelog: Rename `collapsable_if` fix suggestion to "collapse nested if block"
The "use .next()" replacement advice is on the last line of the code snippet,
where it is vulnerable to truncation. Display that advice at the beginning
instead.
closes#5783
Move range_minus_one to pedantic
This moves the range_minus_one lint to the pedantic category, so there
will not be any warnings emitted by default. This should work around
problems where the suggestion is impossible to resolve due to the range
consumer only accepting a specific range implementation, rather than the
`RangeBounds` trait (see #3307).
While it is possible to work around this by extracting the boundary into
a variable, I don't think clippy should encourage people to disable or
work around lints, but instead the lints should be fixable. So hopefully
this will help until a proper implementation checks what the range is
used for.
*Please keep the line below*
changelog: move [`range_minus_one`] to pedantic
Some accuracy lints for floating point operations
This will add some lints for accuracy on floating point operations suggested by @clarfon in #2040 (fixes#2040).
These are the remaining lints:
- [x] x.powi(2) => x * x
- [x] x.logN() / y.logN() => x.logbase(y)
- [x] x.logbase(E) => x.log()
- [x] x.logbase(10) => x.log10()
- [x] x.logbase(2) => x.log2().
- [x] x * PI / 180 => x.to_radians()
- [x] x * 180 / PI => x.to_degrees()
- [x] (x + 1).log() => x.log_1p()
- [x] sqrt(x * x + y * y) => x.hypot(y)
changelog: Included some accuracy lints for floating point operations
Stabilize `transmute` in constants and statics but not const fn
cc #53605 (leaving issue open so we can add `transmute` to `const fn` later)
Previous attempt: #64011
r? @RalfJung
cc @rust-lang/wg-const-eval
new lint: match_like_matches_macro
Suggests using the `matches!` macro from `std` where appropriate.
`redundant_pattern_matching` has been moved into the `matches` pass to allow suppressing the suggestion where `is_some` and friends are a better replacement.
changelog: new lint: `match_like_matches_macro`
single_match_else - single expr/stmt else block corner case
One approach to fix#3489.
See discussion in the issue.
changelog: single_match_else - single expr/stmt else block corner case fix
Added restriction lint: pattern-type-mismatch
changelog: Added a new restriction lint `pattern-type-mismatch`. This lint is especially helpful for beginners learning about the magic behind pattern matching. (This explanation might be worth to include in the next changelog.)
Fix the versions of packages in the multiple_crate_versions ui test by
checking in the Cargo.lock for the test package. `ansi_term 0.11`
depends on `winapi ^0.3.4`. This means means that the expected stderr for
this test would have to be updated whenever `winapi 0.3` is updated
otherwise.
cmp_owned: handle when PartialEq is not implemented symmetrically
changelog: Handle asymmetrical implementations of PartialEq in [`cmp_owned`].
Fixes#4874
clone_on_copy - add machine applicability
Fix#4826.
Change the applicability of the lint clone_on_copy. Split a test file and run rustfix on the clone_on_copy part.
changelog: clone_on_copy - add machine applicability
#5626: lint iterator.map(|x| x)
changelog: adds a new lint for iterator.map(|x| x) (see https://github.com/rust-lang/rust-clippy/issues/5626)
The code also lints for result.map(|x| x) and option.map(|x| x). Also, I'm not sure if I'm checking for type adjustments correctly and I can't think of an example where .map(|x| x) would apply type adjustments.
New lint: suggest `ptr::read` instead of `mem::replace(..., uninitialized())`
resolves: #5575
changelog: improvements to `MEM_REPLACE_WITH_UNINIT`:
- add a new test case in `tests/ui/repl_uninit.rs` to cover the case of replacing with `mem::MaybeUninit::uninit().assume_init()`.
- modify the existing `MEM_REPLACE_WITH_UNINIT` when replacing with `mem::uninitialized` to suggest using `ptr::read` instead.
- lint with `MEM_REPLACE_WITH_UNINIT` when replacing with `mem::MaybeUninit::uninit().assume_init()`
None of the tools seem to need syn 0.15.35, so we can just build syn
1.0.
This was causing an issue with clippy's `compile-test` program: since
multiple versions of `syn` would exist in the build directory, we would
non-deterministically pick one based on filesystem iteration order. If
the pre-1.0 version of `syn` was picked, a strange build error would
occur (see
https://github.com/rust-lang/rust/pull/73594#issuecomment-647671463)
To prevent this kind of issue from happening again, we now panic if we
find multiple versions of a crate in the build directly, instead of
silently picking the first version we find.
let_and_return: avoid "does not live long enough" errors
EDIT: Add #3324 to the list of fixes
<details>
<summary>Description of old impl</summary>
<br>
Avoid suggesting turning the RHS expression of the last statement into the block tail expression if a temporary borrows from a local that would be destroyed before.
This is my first incursion into MIR so there's probably room for improvement!
</details>
Avoid linting if the return type of some method or function called in the last statement has a lifetime parameter.
changelog: Fix false positive in [`let_and_return`]
Fixes#3792Fixes#3324
Add regression test for `string_lit_as_bytes` issue
Closes#5619
Before the fix in https://github.com/rust-lang/rust/pull/72637, `string_lit_as_bytes` was incorrectly triggering on the `env!` macro. With the fix merged, this test makes sure that the lint is not triggering anymore.
changelog: none
New lint: iter_next_slice
Hello, this is a work-in-progress PR for issue: https://github.com/rust-lang/rust-clippy/issues/5572
I have implemented lint to replace `iter().next()` for `slice[index..]` and `array` with `get(index)` and `get(0)` respectively. However since I made a lot of changes, I would like to request some feedback before continuing so that I could fix mistakes.
Thank you!
---
changelog: implement `iter_next_slice` lint and test, and modify `needless_continues`, `for_loop_over_options_result` UI tests since they have `iter().next()`
Add regression test for endless loop / update `pulldown_cmark`
Closes#4917
This was fixed in pulldown_cmark 0.7.1, specifically raphlinus/pulldown-cmark#438
changelog: none
cargo-ui tests: check that <dir>/src exists before processing test
I forgot that I had fixed this in a PR I closed some days ago (#5643).
Before this change, cargo UI tests could fail when switching between branches if the previous branch had a test that the current branch does not have. The directory is not removed when switching because an ignored `Cargo.lock` file exists, and the code was trying to reach `$DIR/src` unconditionally.
This change will just skip a directory that has no `src` subdirectory.
changelog: none
len_zero: skip ranges if feature `range_is_empty` is not enabled
If the feature is not enabled, calling `is_empty()` on a range is ambiguous. Moreover, the two possible resolutions are unstable methods, one inherent to the range and the other being part of the `ExactSizeIterator` trait.
Since `len_zero` only checks for existing `is_empty()` inherent methods, we only take into account the `range_is_empty` feature.
Related: https://github.com/rust-lang/rust/issues/48111#issuecomment-445132965
changelog: len_zero: avoid linting ranges without #![feature(range_is_empty)]
Fixes: #3807
Extend useless conversion
This PR extends `useless_conversion` lint with `TryFrom` and `TryInto`
fixes: #5344
changelog: Extend `useless_conversion` with `TryFrom` and `TryInto`
Make empty_line_after_outer_attr an early lint
Fixes#5567
Unfortunately I couldn't find a way to reproduce the issue without syn/quote. Considering that most real-world macros use syn and/or quote, I think it's okay to pull them in anyway.
changelog: Fix false positive in [`empty_line_after_outer_attr`]
reversed_empty_ranges: add suggestion for &slice[N..N]
As discussed in the issue thread, the user accepted this solution. Let me know if this is what we want, or if changing the way we lint the N..N case is prefered.
changelog: reversed_empty_ranges: add suggestion for &slice[N..N]
Closes#5628
ptr_arg: honor `allow` attribute on arguments
The `intravisit::Visitor` impl for `LateContextAndPass` only takes into account the attributes of a function parameter inside the `check_param` method. `ptr_arg` starts its heuristics at `check_item` / `check_impl_item` / `check_trait_item`, so the `allow` is not taken into account automatically.
changelog: ptr_arg: honor `allow` attribute on arguments
Fixes#5644
option_option test case #4298
Adds regression test case for #4298.
The bug seems still present although rust Playground said otherwise.
changelog: none
new_without_default: do not suggest deriving
---
changelog: do not suggest deriving `Default` in `new_without_default`
This commit changes the behavior of the `new_without_default` lint to not suggest deriving `Default`. This suggestion is misleading if the `new` implementation does something different than what a derived `Default` implementation would do, because then the two methods would not be equivalent.
Instead, the `can_derive_default` check is removed, and we always suggest implementing `Default` in terms of `new()`.
New lint: `match_wildcard_for_single_variants`
changelog: Added a new lint match_wildcard_for_single_variants to warn on enum matches where a wildcard is used to match a single variant
Closes#5556
Rename lint `identity_conversion` to `useless_conversion`
Lint name `identity_conversion` was misleading, so this PR renames it to `useless_conversion`.
As decision has not really came up in the issue comments, this PR will probably need discussion.
fixes#3106
changelog: Rename lint `identity_conversion` to `useless_conversion`
Merge some lints together
This PR merges following lints:
- `block_in_if_condition_expr` and `block_in_if_condition_stmt` → `blocks_in_if_conditions`
- `option_map_unwrap_or`, `option_map_unwrap_or_else` and `result_map_unwrap_or_else` → `map_unwrap`
- `option_unwrap_used` and `result_unwrap_used` → `unwrap_used`
- `option_expect_used` and `result_expect_used` → `expect_used`
- `wrong_pub_self_convention` into `wrong_self_convention`
- `for_loop_over_option` and `for_loop_over_result` → `for_loops_over_fallibles`
Lints that have already been merged since the issue was created:
- [x] `new_without_default` and `new_without_default_derive` → `new_without_default`
Need more discussion:
- `string_add` and `string_add_assign`: do we agree to merge them or not? Is there something more to do? → **not merge finally**
- `identity_op` and `modulo_one` → `useless_arithmetic`: seems outdated, since `modulo_arithmetic` has been created.
fixes#1078
changelog: Merging some lints together:
- `block_in_if_condition_expr` and `block_in_if_condition_stmt` → `blocks_in_if_conditions`
- `option_map_unwrap_or`, `option_map_unwrap_or_else` and `result_map_unwrap_or_else` → `map_unwrap_or`
- `option_unwrap_used` and `result_unwrap_used` → `unwrap_used`
- `option_expect_used` and `result_expect_used` → `expect_used`
- `for_loop_over_option` and `for_loop_over_result` → `for_loops_over_fallibles`
identity_op: allow `1 << 0`
I went for accepting `1 << 0` verbatim instead of something more general as it seems to be what everyone in the issue thread needed.
changelog: identity_op: allow `1 << 0` as it's a common pattern in bit manipulation code.
Fixes#3430
Reversed empty ranges
This lint checks range expressions with inverted limits which result in empty ranges. This includes also the ranges used to index slices.
The lint reverse_range_loop was covering iteration of reversed ranges in a for loop, which is a subset of what this new lint covers, so it has been removed. I'm not sure if that's the best choice. It would be doable to check in the new lint that we are not in the arguments of a for loop; I went for removing it because the logic was too similar to keep them separated.
changelog: Added reversed_empty_ranges lint that checks for ranges where the limits have been inverted, resulting in empty ranges. Removed reverse_range_loop which was covering a subset of the new lint.
Closes#4192Closes#96
Fix match on vec items: match on vec[..]
- Added new tests
- Fixed false positive when matching on full range, which will never panic
Closes#5551
changelog: fix match_on_vec_items when matching full range
Fix `unnecessary_unwrap` lint when checks are done in parameters
Fixes a false positive in `unnecessary_unwrap` lint when checks are done in macro parameters.
FIxes#5174
changelog: Fixes a false positive in `unnecessary_unwrap` lint when checks are done in macro parameters.
Fix FP on while-let-on-iterator
- fix `is_refutable` for slice patterns
- fix `is_refutable` for bindings
- add some TODO-s for cases, which can not be fixed easily
fixes#3780
changelog: fix FP on while-let-on-iterator for arrays and bindings
Implement the manual_non_exhaustive lint
Some implementation notes:
* Not providing automatic fixups because additional changes may be needed in other parts of the code, e.g. when constructing a struct.
* Even though the attribute is valid on enum variants, it's not possible to use the manual implementation of the pattern because the visibility is always public, so the lint ignores enum variants.
* Unit structs are also ignored, it's not possible to implement the pattern manually without fields.
* The attribute is not accepted in unions, so those are ignored too.
* Even though the original issue did not mention it, tuple structs are also linted because it's possible to apply the pattern manually.
changelog: Added the manual non-exhaustive implementation lint
Closes#2017
Fix the bugs of `manual_memcpy`, simplify the suggestion and refactor it
While I’m working on the long procrastinated work to expand `manual_memcpy`(#1670), I found a few minor bugs and probably unidiomatic or old coding style. There is a brief explanation of changes to the behaviour this PR will make below. And, I have a questoin: do I need to add tests for the first and second fixed bugs? I thought it might be too rare cases to include the tests for those. I added for the last one though.
* Bug fix
* It negates resulted offsets (`src/dst_offset`) when `offset` is subtraction by 0. This PR will remove any subtraction by 0 as a part of minification.
```rust
for i in 0..5 {
dst[i - 0] = src[i];
}
```
```diff
warning: it looks like you're manually copying between slices
--> src/main.rs:2:14
|
LL | for i in 0..5 {
- | ^^^^ help: try replacing the loop by: `dst[..-5].clone_from_slice(&src[..5])`
+ | ^^^^ help: try replacing the loop by: `dst[..5].clone_from_slice(&src[..5])`
|
```
* It prints `RangeTo` or `RangeFull` when both of `end` and `offset` are 0, which have different meaning. This PR will print 0. I could reject the cases `end` is 0, but I thought I won’t catch other cases `reverse_range_loop` will trigger, and it’s over to catch every such cases.
```rust
for i in 0..0 {
dst[i] = src[i];
}
```
```diff
warning: it looks like you're manually copying between slices
--> src/main.rs:2:14
|
LL | for i in 0..0 {
- | ^^^^ help: try replacing the loop by: `dst.clone_from_slice(&src[..])`
+ | ^^^^ help: try replacing the loop by: `dst[..0].clone_from_slice(&src[..0])`
|
```
* it prints four dots when `end` is `None`. This PR will ignore any `for` loops without `end` because a `for` loop that takes `RangeFrom` as its argument and contains indexing without the statements or the expressions that end loops such as `break` will definitely panic, and `manual_memcpy` should ignore the loops with such control flow.
```rust
fn manual_copy(src: &[u32], dst: &mut [u32]) {
for i in 0.. {
dst[i] = src[i];
}
}
```
```diff
-warning: it looks like you're manually copying between slices
- --> src/main.rs:2:14
- |
-LL | for i in 0.. {
- | ^^^ help: try replacing the loop by: `dst[....].clone_from_slice(&src[....])`
- |
```
* Simplification of the suggestion
* It prints 0 when `start` or `end` and `offset` are same (from #3323). This PR will use `RangeTo`
changelog: fixed the bugs of `manual_memcpy` and also simplify the suggestion.
New lint `match_vec_item`
Added new lint to warn a match on index item which can panic. It's always better to use `get(..)` instead.
Closes#5500
changelog: New lint `match_on_vec_items`
- Show just one error message with multiple suggestions in case of
using multiple times an OS in target family position
- Only suggest #[cfg(unix)] when the OS is in the Unix family
- Test all the operating systems
Don't trigger while_let_on_iterator when the iterator is recreated every iteration
r? @phansch
Fixes#1654
changelog: Fix false positive in [`while_let_on_iterator`]
Downgrade match_bool to pedantic
I don't quite buy the justification in https://rust-lang.github.io/rust-clippy/. The justification is:
> It makes the code less readable.
In the Rust codebases I've worked in, I have found people were comfortable using `match bool` (selectively) to make code more readable. For example, initializing struct fields is a place where the indentation of `match` can work better than the indentation of `if`:
```rust
let _ = Struct {
v: {
...
},
w: match doing_w {
true => ...,
false => ...,
},
x: Nested {
c: ...,
b: ...,
a: ...,
},
y: if doing_y {
...
} else { // :(
...
},
z: ...,
};
```
Or sometimes people prefer something a bit less pithy than `if` when the meaning of the bool doesn't read off clearly from the condition:
```rust
if set.insert(...) {
... // ???
} else {
...
}
match set.insert(...) {
// set.insert returns false if already present
false => ...,
true => ...,
}
```
Or `match` can be a better fit when the bool is playing the role more of a value than a branch condition:
```rust
impl ErrorCodes {
pub fn from(b: bool) -> Self {
match b {
true => ErrorCodes::Yes,
false => ErrorCodes::No,
}
}
}
```
And then there's plain old it's-1-line-shorter, which means we get 25% more content on a screen when stacking a sequence of conditions:
```rust
let old_noun = match old_binding.is_import() {
true => "import",
false => "definition",
};
let new_participle = match new_binding.is_import() {
true => "imported",
false => "defined",
};
```
Bottom line is I think this lint fits the bill better as a pedantic lint; I don't think linting on this by default is justified.
changelog: Remove match_bool from default set of enabled lints
Fixes#4226
This introduces the lint await_holding_lock. For async functions, we iterate
over all types in generator_interior_types and look for types named MutexGuard,
RwLockReadGuard, or RwLockWriteGuard. If we find one then we emit a lint.
If let else mutex
changelog: Adds lint to catch incorrect use of `Mutex::lock` in `if let` expressions with lock calls in any of the blocks.
closes: #5219
Fix issue #2907.
Update the "borrow box" lint to avoid recommending the following
conversion:
```
// Old
pub fn f(&mut Box<T>) {...}
// New
pub fn f(&mut T) {...}
```
Given a mutable reference to a box, functions may want to change
"which" object the Box is pointing at.
This change avoids recommending removing the "Box" parameter
for mutable references.
changelog: Don't trigger [`borrow_box`] lint on `&mut Box` references
Update the "borrow box" lint to avoid recommending the following
conversion:
```
// Old
pub fn f(&mut Box<T>) {...}
// New
pub fn f(&mut T) {...}
```
Given a mutable reference to a box, functions may want to change
"which" object the Box is pointing at.
This change avoids recommending removing the "Box" parameter
for mutable references.
add lint futures_not_send
changelog: add lint futures_not_send
fixes#5379
~Remark: one thing that can (should?) still be improved is to directly include the error message from the `Send` check so that the programmer stays in the flow. Currently, getting the actual error message requires a restructuring of the code to make the `Send` constraint explicit.~
It now shows all unmet constraints for allowing the Future to be Send.
Do not lint in macros for match lints
Don't lint in macros for match lints, more precisely in `check_pat` and `check_local` where it was not the case.
changelog: none
fixes: #5362
large_enum_variant: Report sizes of variants
This reports the sizes of the largest and second-largest variants.
Closes#5459
changelog: `large_enum_variant`: Report the sizes of the largest and second-largest variants.
Disallow bit-shifting in integer_arithmetic
Make the `integer_arithmetic` lint detect all the operations that are defined as being capable of overflow in the [Rust Reference](https://doc.rust-lang.org/reference/expressions/operator-expr.html#overflow), by also linting for bit-shifting operations (`<<`, `>>`).
changelog: Disallow bit-shifting in `integer_arithmetic`
Add lint on large non scalar const
This PR adds the new lint `non_scalar_const` that aims to warn against `const` declaration of large arrays. For performance, because of inlining, large arrays should be preferably declared as `static`.
Note: i made this one to warn on all const arrays, whether they are in a body function or not. I don't know if this is really necessary, i could just reduce this lint to variables out of function scope.
Fixes: #400
changelog: add new lint for large non-scalar types declared as const
Add lint for float in array comparison
Fixes#4277
changelog:
- Added new handler for expression of index kind (e.g. `arr[i]`). It returns a constant when both array and index are constant, or when the array is constant and all values are equal.
- Trigger float_cmp and float_cmp_const lint when comparing arrays. Allow for comparison when one of the arrays contains only zeros or infinities.
- Added appropriate tests for such cases.
Fixes#5405: redundant clone false positive with arrays
Check whether slice elements implement Copy before suggesting to drop
the clone method
changelog: add a check for slice indexing on redundant_clone lint
This change adds a check to the `inconsistent_digit_grouping` to add a check for
NumericLiterals that follow the UUID format of 8-4-4-4-12.
If the NumericLiteral matches the UUID format, no further inconsistent grouping checks
will be performed.
Closes#5431
Check for clone-on-copy in argument positions
Earlier if arguments to method calls matched the above pattern they were
not reported. This patch ensures such arguments are checked as well.
Fixes#5436
changelog: apply clone_on_copy lint to func args as well
Earlier if arguments to method calls matched the above pattern they were
not reported. This patch ensures such arguments are checked as well.
Fixes#5436
Downgrade implicit_hasher to pedantic
From the [documentation](https://rust-lang.github.io/rust-clippy/master/index.html#implicit_hasher), this lint is intended to suggest:
```diff
- pub fn foo(map: &mut HashMap<i32, i32>) { }
+ pub fn foo<S: BuildHasher>(map: &mut HashMap<i32, i32, S>) { }
```
I think this is pedantic. I get that this lint can benefit core libraries like serde, but that's exactly the use case for pedantic lints; a library like serde will [enable clippy_pedantic](fd6741f4b0/src/lib.rs (L304)) and take the time to go through everything possible. Similar for libraries doing a libz blitz style checkup before committing to a 1.0 release; it would make sense to run through all the available pedantic lints then.
But otherwise, for most codebases and certainly for industrial codebases, the above suggested change just makes the codebase more obtuse for questionable benefit.
changelog: Remove implicit_hasher from default set of enabled lints
Check fn header along with decl when suggesting to implement trait
When checking for functions that are potential candidates for trait
implementations check the function header to make sure modifiers like
asyncness, constness and safety match before triggering the lint.
Fixes#5413, #4290
changelog: check fn header along with decl for should_implement_trait
When checking for functions that are potential candidates for trait
implementations check the function header to make sure modifiers like
asyncness, constness and safety match before triggering the lint.
Fixes#5413, #4290
Downgrade unreadable_literal to pedantic
As motivated by #5418. This is the top most commonly suppressed Clippy style lint, which indicates that the community has decided they don't share Clippy's opinion on the best style of this.
I've left the lint in as pedantic, though it could be that "restriction" would be better -- I can see this lint being useful as an opt-in restriction in some codebases.
changelog: Remove unreadable_literal from default set of enabled lints
Add new lint for `Result<T, E>.map_or(None, Some(T))`
Fixes#5414
PR Checklist
---
- [x] Followed lint naming conventions (the name is a bit awkward, but it seems to conform)
- [x] Added passing UI tests (including committed .stderr file)
- [x] cargo test passes locally
- [x] Executed cargo dev update_lints
- [x] Added lint documentation
- [x] Run cargo dev fmt
`Result<T, E>` has an [`ok()`](https://doc.rust-lang.org/std/result/enum.Result.html#method.ok) method that adapts a `Result<T,E>` into an `Option<T>`.
It's possible to get around this adapter by writing `Result<T,E>.map_or(None, Some)`.
This lint is implemented as a new variant of the existing [`option_map_none` lint](https://github.com/rust-lang/rust-clippy/pull/2128)
Downgrade trivially_copy_pass_by_ref to pedantic
The rationale for this lint is documented as:
> In many calling conventions instances of structs will be passed through registers if they fit into two or less general purpose registers.
I think the purported performance benefits of clippy's recommendation are overstated. This isn't worth asking people to sprinkle code with more `*``*``&``*``&` to chase the alleged performance.
This should be a pedantic lint that is disabled by default and opted in if some specific performance sensitive codebase determines that it is worthwhile.
As a reminder, a typical place that a reference to a primitive would come up is if the function is used as a filter. Triggering a performance-oriented lint on this type of code is the definition of pedantic.
```rust
fn filter(_n: &i32) -> bool {
true
}
fn main() {
let v = vec![1, 2, 3];
v.iter().copied().filter(filter).for_each(drop);
}
```
```console
warning: this argument (4 byte) is passed by reference, but would be more efficient if passed by value (limit: 8 byte)
--> src/main.rs:1:15
|
1 | fn filter(_n: &i32) -> bool {
| ^^^^ help: consider passing by value instead: `i32`
```
changelog: Remove trivially_copy_pass_by_ref from default set of enabled lints
Downgrade let_unit_value to pedantic
Given that the false positive in #1502 is marked E-hard and I don't have much hope of it getting fixed, I think it would be wise to disable this lint by default. I have had to suppress this lint in every substantial codebase (\>100k line) I have worked in. Any time this lint is being triggered, it's always the false positive case.
The motivation for this lint is documented as:
> A unit value cannot usefully be used anywhere. So binding one is kind of pointless.
with this example:
> ```rust
> let x = {
> 1;
> };
> ```
Sure, but the author would find this out via an unused_variable warning or from `x` not being the type that they need further down. If there ends up being a type error on `x`, clippy's advice isn't going to help get the code compiling because it can only run if the code already compiles.
changelog: Remove let_unit_value from default set of enabled lints
Fix update_lints
This fixes a bug in update_lints, where `internal` lints were not registered properly. This also cleans up some code. For example: The code generation functions no longer filter the lints the are given. This is now the task of the caller. This way, it is more obvious in the `replace_in_file` calls which lints will be included in which part of a file.
This also turns the lint modules private. There is no need for them to be public, since shared code should be in the utils module anyway.
And last but not least, this fixes the `register_lints` code generation, so also internal lints get registered.
changelog: none
Result<T, E> has an `ok()` method that adapts a Result<T,E> into an Option<T>.
It's possible to get around this adapter by writing Result<T,E>.map_or(None, Some).
This lint is implemented as a new variant of the existing
[`option_map_none` lint](https://github.com/rust-lang/rust-clippy/pull/2128)
useless Rc<Rc<T>>, Rc<Box<T>>, Rc<&T>, Box<&T>
refers to #2394
changelog: Add lints for Rc<Rc<T>> and Rc<Box<T>> and Rc<&T>, Box<&T>
this is based on top of another change #5310 so probably should go after that one.
Downgrade option_option to pedantic
Based on a search of my work codebase (\>500k lines) for `Option<Option<`, it looks like a bunch of reasonable uses to me. The documented motivation for this lint is:
> an optional optional value is logically the same thing as an optional value but has an unneeded extra level of wrapping
which seems a bit bogus in practice. For example a typical usage would look like:
```rust
let mut host: Option<String> = None;
let mut port: Option<i32> = None;
let mut payload: Option<Option<String>> = None;
for each field {
match field.name {
"host" => host = Some(...),
"port" => port = Some(...),
"payload" => payload = Some(...), // can be null or string
_ => return error,
}
}
let host = host.ok_or(...)?;
let port = port.ok_or(...)?;
let payload = payload.ok_or(...)?;
do_thing(host, port, payload)
```
This lint seems to fit right in with the pedantic group; I don't think linting on occurrences of `Option<Option<T>>` by default is justified.
---
changelog: Remove option_option from default set of enabled lints
Lint unnamed address comparisons
Functions and vtables have an insignificant address. Attempts to compare such addresses will lead to very surprising behaviour. For example: addresses of different functions could compare equal; two trait object pointers representing the same object and the same type could be unequal.
Lint against unnamed address comparisons to avoid issues like those in rust-lang/rust#69757 and rust-lang/rust#54685.
changelog: New lints: [`fn_address_comparisons`] [#5294](https://github.com/rust-lang/rust-clippy/pull/5294), [`vtable_address_comparisons`] [#5294](https://github.com/rust-lang/rust-clippy/pull/5294)
`unused_self` false positive
fixes#5351
Remove the for loop in `unused_self` so that lint enabled for one method doesn't trigger on another method.
changelog: Fix false positive in `unused_self` around lint gates on impl items
Lint for `pub(crate)` items that are not crate visible due to the visibility of the module that contains them
changelog: Add `redundant_pub_crate` lint
Closes#5274.
Improvement: Don't show function body in needless_lifetimes
Changes the span on which the lint is reported to point to only the
function return type instead of the entire function body.
Fixes#5284
changelog: none
add lint on File::read_to_string and File::read_to_end
Adds lint `verbose_file_reads` which checks for use of File::read_to_end and File::read_to_string.
Closes https://github.com/rust-lang/rust-clippy/issues/4916
changelog: add lint on File::{read_to_end, read_to_string}
Use `edition:2018` flag more widely
Now we recommend using `// edition:2018`, so let's use it more widely.
Also replace a too old example with new one in the docs.
changelog: none
redundant_pattern: take binding (ref, ref mut) into account in suggestion
fixes#5271
changelog: redundant_pattern: take binding (ref, ref mut) into account in suggestion (#5271)
Fix match single binding when in a let stmt
Fix bad suggestion when `match_single_binding` lints when inside a local (let) statement.
Fixes#5267
changelog: none
Resolve false positives of unnecessary_cast for non-decimal integers
This PR resolves false positives of `unnecessary_cast` for hexadecimal integers to floats and adds a corresponding test case.
Fixes: #5220
changelog: none
Add lint for .. use in fully binded struct
This PR adds the lint `match-wild-in-fully-binded-struct` to prevent the use of the `..` pattern when all fields of the struct are already binded.
Fixes: #638
changelog: Add [`rest_pat_in_fully_bound_structs`] lint to warn against the use of `..` in fully binded struct
Detect usage of custom floating-point abs implementation
Closes#5224
changelog: Enhance [`suboptimal_flops`] lint to detect manual implementations of the `abs` method
Whitelist unused attribute for use items.
This PR whitelists the `unused` attribute with `use` items and adds a corresponding test case.
Fixes: #5229
changelog: none
Add lint to detect floating point operations that can be computed more
accurately at the cost of performance. `cbrt`, `ln_1p` and `exp_m1`
library functions call their equivalent cmath implementations which is
slower but more accurate so moving checks for these under this new lint.
Merge the accuracy and efficiency lints into a single lint that
checks for improvements to accuracy, efficiency and readability
of floating-point expressions.
Move check for lossy whole-number floats out of `excessive_precision`
changelog: Add new lint `lossy_float_literal` to detect lossy whole number float literals and move it out of `excessive_precision` again.
Fixes#5201
Make it possible to correctly indent snippet_block snippets
This adds a `indent_relative_to` arg to the `{snippet,expr}_block` functions. This makes it possible to keep the correct indentation of block like suggestions.
In addition, this makes the `trim_multiline` function private and adds a `indent_of` function, to get the indentation of the first line of a span.
The suggestion of `needless_continue` cannot be made auto applicable, since it would be also necessary to remove code following the linted expression. (Well, maybe it is possible, but I don't know how to do it. Expanding the suggestion span to the last expression, that should be removed didn't work)
changelog: Improve suggestions, when blocks of code are involved
Port mitsuhiko's excessive bools lints
Closes#4 .
changelog: add `struct_excessive_bools` and `fn_params_excessive_bools` lints.
I moved is_trait_impl_item check because at first I implemented it as a late pass for some reason but then I realized it's actually an early lint. But it's a useful function to have, should I move it into a separate pr?
Do not lint `unnecessary_unwrap` in external macros
Fixes#5131
I think we shouldn't lint `{panicking, unnecessary}_unwrap` in macros, not just `assert!`.
changelog: Fix false positive in `unnecessary_unwrap`
Deprecate util/dev in favor of cargo alias
This means one less shell script and a bit more cross-platform support
for contributors.
If you've been using `./util/dev` before, this now becomes `cargo dev`.
The key part of this change is found in `.cargo/config` where an alias for calling the `clippy_dev` binary is defined.
changelog: none
If you've been using `./util/dev` before, this now becomes `cargo dev`.
The key part of this change is found in `.cargo/config`.
This means one less shell script and a bit more cross-platform support
for contributors.
add `let_underscore_lock` lint
closes#1574
changelog: add `let_underscore_lock` lint
I am not entirely sure about my docs/messages wording here, improvements are welcome
Clean up `span_lint` in `methods/mod.rs`
Uses `span_help_and_lint` instead of `span_lint` and `span_lint_and_sugg` instead of `span_lint_and_then`.
changelog: none
dont fire `possible_missing_comma` if intendation is present
Closes#4399
changelog: dont fire `possible_missing_comma` if intendation is present
I suspect there is already a utils function for indentation (but searching indent didn't yield a function for that), and my solution is certainly not universal, but it's probably the best we can do.
Detect usage of invalid atomic ordering in memory fences
Detect usage of `core::sync::atomic::{fence, compiler_fence}` with `Ordering::Relaxed` and suggest valid alternatives.
changelog: Extend `invalid_atomic_ordering` to lint memory fences
Fixes#5026
Avoid mut_key on types of unknown layout
This fixes#5020 by requiring a known layout for the key type before linting. Edit: This fixes#5043, too.
changelog: none
Keep the ordering in `nonminimal_bool` lint
I believe it shouldn't cause any regression but feel free to let me know if you have a doubtful example.
Also, splits up `booleans` ui test.
Fixes#5045
changelog: none
Autogenerate new lints
Add option in clippy_dev to automatically generate boilerplate code for adding new lints
example:
`./util/dev new_lint --name=iter_nth_zero --type=late`
Fixes#4942
changelog: none
Match wild err arm improvements
This lint should trigger on other identifiers which have `_` prefix (such as `_e`) and only if they are unused in the panic block.
_Note_: the `is_unused` function is greatly inspired from `pat_is_wild` function in [loops lints](43ac9416d9/clippy_lints/src/loops.rs (L1689)).
I've been considering doing some refactoring, maybe in utils. Maybe this PR or a new one. What do you think ?
fixes#5024
changelog: none
New lint: pats_with_wild_match_arm
Wildcard use with other pattern in same match arm.
The wildcard covers other(s) pattern(s) as it will match anyway.
changelog: add new lint when multiple patterns (including wildcard) are used in a match arm.
Fixes#4640.
Fix redundant_clone lint not working with PathBuf and OsString
https://github.com/rust-lang/rust-clippy/pull/4825 diabled MIR optimization in clippy, including `rustc_mir::transform::InstCombine` which reduces `&(*x)` to `x`. This PR tries to unwrap `&*` when looking into `mir::Rvalue`s.
Fixes#5014.
---
changelog: fixed `redundant_clone` lint not working with `PathBuf` and `OsString`
Detect usage of invalid atomic ordering modes such as
`Ordering::{Release, AcqRel}` in atomic loads and
`Ordering::{Acquire, AcqRel}` in atomic stores.
Use `mem::take` instead of `mem::replace` when applicable
`std::mem::take` can be used to replace a value of type `T` with `T::default()` instead of `std::mem::replace`.
Fixes issue #4871
changelog: Added lint for [`mem_replace_with_default`]
Fix ICE on `unsound_collection_transmute`
Fixes#4968
Check if `Ty`s are normalizable. It might show hidden false negative, I'm not sure.
Also, the regression tests are placed on two dirs, so move them to `/crashes`. I think it will be easier to find the right place.
changelog: Fix ICE on `unsound_collection_transmute`
Currently `replace_consts` lint applies within match patterns but
the suggestion is incorrect as function calls are disallowed in
them. To fix this we prevent the lint from firing within patterns.
new lint: mutable_key_type
This fixes#732 - well, partly, it doesn't adress `Hash` impls, but the use of mutable types as map keys or set members
changelog: add `mutable_key_type` lint
r? @flip1995
Add `let_underscore_must_use` lint
changelog: closes#4812 , added a new `let_underscore_must_use` lint, moved `is_must_use_ty` to utils, added `is_must_use_fn` util function
Fix `map_clone` false positive
Don't lint when the item type is not a reference. `copied` only applies to references.
changelog: Fix `map_clone` false positive
Currently the cognitive complexity lint spans the entire function
body making it really difficult to read and refactor the code in
editors. To fix this we reduce the lint span to the function name.
Move `iterator_step_by_zero` and correct the documentation
Move `iterator_step_by_zero` and correct the documentation.
changelog: Corrected `iterator_step_by_zero` documentation
Currently `cmp_nan` lint doesn't detect comparisons with NaN's
if the operands are consts variables so to fix this we evaluate
the const variables first before testing for NaN.
Fix false positive with cast_sign_loss lint
`cast_sign_loss` lint incorrectly suggests that the result of `checked_abs`, `rem_euclid` and `checked_rem_euclid` cannot be casted to an unsigned integer without loss.
Fixes#4818#4764#4743
changelog: Fix false positives in `cast_sign_loss` lint
The Rust Book recommends that functions that return a `Result` type have
a doc comment with an `# Errors` section describing the kind of errors
that can be returned
(https://doc.rust-lang.org/book/ch14-02-publishing-to-crates-io.html#commonly-used-sections).
This change adds a lint to enforce this. The lint is allow by default;
it can be enabled with `#![warn(clippy::missing_errors_doc)]`.
Closes#4854.
`cast_sign_loss` lint incorrectly suggests that the result of
`checked_abs`, `rem_euclid` and `checked_rem_euclid` cannot
be casted to an unsigned integer without loss.
Fix FP in manual_swap lint with slice-like types
Fixes#4853
changelog: Fix FP in [`manual_swap`] lint with slice-like types and make it auto applicable
