# Objective
Fixes#3744
## Solution
The old code used the formula `normal . center + d + radius <= 0` to determine if the sphere with center `center` and radius `radius` is outside the plane with normal `normal` and distance from origin `d`. This only works if `normal` is normalized, which is not necessarily the case. Instead, `normal` and `d` are both multiplied by some factor that `radius` isn't multiplied by. So the additional code multiplied `radius` by that factor.
# Objective
Currently, errors in the render graph runner are exposed via a `Result::unwrap()` panic message, which dumps the debug representation of the error.
## Solution
This PR updates `render_system` to log the chain of errors, followed by an explicit panic:
```
ERROR bevy_render::renderer: Error running render graph:
ERROR bevy_render::renderer: > encountered an error when running a sub-graph
ERROR bevy_render::renderer: > tried to pass inputs to sub-graph "outline_graph", which has no input slots
thread 'main' panicked at 'Error running render graph: encountered an error when running a sub-graph', /[redacted]/bevy/crates/bevy_render/src/renderer/mod.rs:44:9
```
Some errors' `Display` impls (via `thiserror`) have also been updated to provide more detail about the cause of the error.
# Objective
- Currently there is now way of making an indirect draw call from a tracked render pass.
- This is a very useful feature for GPU based rendering.
## Solution
- Expose the `draw_indirect` and `draw_indexed_indirect` methods from the wgpu `RenderPass` in the `TrackedRenderPass`.
## Alternative
- #3595: Expose the underlying `RenderPass` directly
# Objective
- In the large majority of cases, users were calling `.unwrap()` immediately after `.get_resource`.
- Attempting to add more helpful error messages here resulted in endless manual boilerplate (see #3899 and the linked PRs).
## Solution
- Add an infallible variant named `.resource` and so on.
- Use these infallible variants over `.get_resource().unwrap()` across the code base.
## Notes
I did not provide equivalent methods on `WorldCell`, in favor of removing it entirely in #3939.
## Migration Guide
Infallible variants of `.get_resource` have been added that implicitly panic, rather than needing to be unwrapped.
Replace `world.get_resource::<Foo>().unwrap()` with `world.resource::<Foo>()`.
## Impact
- `.unwrap` search results before: 1084
- `.unwrap` search results after: 942
- internal `unwrap_or_else` calls added: 4
- trivial unwrap calls removed from tests and code: 146
- uses of the new `try_get_resource` API: 11
- percentage of the time the unwrapping API was used internally: 93%
# Objective
Will fix#3377 and #3254
## Solution
Use an enum to represent either a `WindowId` or `Handle<Image>` in place of `Camera::window`.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
This PR makes a number of changes to how meshes and vertex attributes are handled, which the goal of enabling easy and flexible custom vertex attributes:
* Reworks the `Mesh` type to use the newly added `VertexAttribute` internally
* `VertexAttribute` defines the name, a unique `VertexAttributeId`, and a `VertexFormat`
* `VertexAttributeId` is used to produce consistent sort orders for vertex buffer generation, replacing the more expensive and often surprising "name based sorting"
* Meshes can be used to generate a `MeshVertexBufferLayout`, which defines the layout of the gpu buffer produced by the mesh. `MeshVertexBufferLayouts` can then be used to generate actual `VertexBufferLayouts` according to the requirements of a specific pipeline. This decoupling of "mesh layout" vs "pipeline vertex buffer layout" is what enables custom attributes. We don't need to standardize _mesh layouts_ or contort meshes to meet the needs of a specific pipeline. As long as the mesh has what the pipeline needs, it will work transparently.
* Mesh-based pipelines now specialize on `&MeshVertexBufferLayout` via the new `SpecializedMeshPipeline` trait (which behaves like `SpecializedPipeline`, but adds `&MeshVertexBufferLayout`). The integrity of the pipeline cache is maintained because the `MeshVertexBufferLayout` is treated as part of the key (which is fully abstracted from implementers of the trait ... no need to add any additional info to the specialization key).
* Hashing `MeshVertexBufferLayout` is too expensive to do for every entity, every frame. To make this scalable, I added a generalized "pre-hashing" solution to `bevy_utils`: `Hashed<T>` keys and `PreHashMap<K, V>` (which uses `Hashed<T>` internally) . Why didn't I just do the quick and dirty in-place "pre-compute hash and use that u64 as a key in a hashmap" that we've done in the past? Because its wrong! Hashes by themselves aren't enough because two different values can produce the same hash. Re-hashing a hash is even worse! I decided to build a generalized solution because this pattern has come up in the past and we've chosen to do the wrong thing. Now we can do the right thing! This did unfortunately require pulling in `hashbrown` and using that in `bevy_utils`, because avoiding re-hashes requires the `raw_entry_mut` api, which isn't stabilized yet (and may never be ... `entry_ref` has favor now, but also isn't available yet). If std's HashMap ever provides the tools we need, we can move back to that. Note that adding `hashbrown` doesn't increase our dependency count because it was already in our tree. I will probably break these changes out into their own PR.
* Specializing on `MeshVertexBufferLayout` has one non-obvious behavior: it can produce identical pipelines for two different MeshVertexBufferLayouts. To optimize the number of active pipelines / reduce re-binds while drawing, I de-duplicate pipelines post-specialization using the final `VertexBufferLayout` as the key. For example, consider a pipeline that needs the layout `(position, normal)` and is specialized using two meshes: `(position, normal, uv)` and `(position, normal, other_vec2)`. If both of these meshes result in `(position, normal)` specializations, we can use the same pipeline! Now we do. Cool!
To briefly illustrate, this is what the relevant section of `MeshPipeline`'s specialization code looks like now:
```rust
impl SpecializedMeshPipeline for MeshPipeline {
type Key = MeshPipelineKey;
fn specialize(
&self,
key: Self::Key,
layout: &MeshVertexBufferLayout,
) -> RenderPipelineDescriptor {
let mut vertex_attributes = vec![
Mesh::ATTRIBUTE_POSITION.at_shader_location(0),
Mesh::ATTRIBUTE_NORMAL.at_shader_location(1),
Mesh::ATTRIBUTE_UV_0.at_shader_location(2),
];
let mut shader_defs = Vec::new();
if layout.contains(Mesh::ATTRIBUTE_TANGENT) {
shader_defs.push(String::from("VERTEX_TANGENTS"));
vertex_attributes.push(Mesh::ATTRIBUTE_TANGENT.at_shader_location(3));
}
let vertex_buffer_layout = layout
.get_layout(&vertex_attributes)
.expect("Mesh is missing a vertex attribute");
```
Notice that this is _much_ simpler than it was before. And now any mesh with any layout can be used with this pipeline, provided it has vertex postions, normals, and uvs. We even got to remove `HAS_TANGENTS` from MeshPipelineKey and `has_tangents` from `GpuMesh`, because that information is redundant with `MeshVertexBufferLayout`.
This is still a draft because I still need to:
* Add more docs
* Experiment with adding error handling to mesh pipeline specialization (which would print errors at runtime when a mesh is missing a vertex attribute required by a pipeline). If it doesn't tank perf, we'll keep it.
* Consider breaking out the PreHash / hashbrown changes into a separate PR.
* Add an example illustrating this change
* Verify that the "mesh-specialized pipeline de-duplication code" works properly
Please dont yell at me for not doing these things yet :) Just trying to get this in peoples' hands asap.
Alternative to #3120Fixes#3030
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Adds "hot reloading" of internal assets, which is normally not possible because they are loaded using `include_str` / direct Asset collection access.
This is accomplished via the following:
* Add a new `debug_asset_server` feature flag
* When that feature flag is enabled, create a second App with a second AssetServer that points to a configured location (by default the `crates` folder). Plugins that want to add hot reloading support for their assets can call the new `app.add_debug_asset::<T>()` and `app.init_debug_asset_loader::<T>()` functions.
* Load "internal" assets using the new `load_internal_asset` macro. By default this is identical to the current "include_str + register in asset collection" approach. But if the `debug_asset_server` feature flag is enabled, it will also load the asset dynamically in the debug asset server using the file path. It will then set up a correlation between the "debug asset" and the "actual asset" by listening for asset change events.
This is an alternative to #3673. The goal was to keep the boilerplate and features flags to a minimum for bevy plugin authors, and allow them to home their shaders near relevant code.
This is a draft because I haven't done _any_ quality control on this yet. I'll probably rename things and remove a bunch of unwraps. I just got it working and wanted to use it to start a conversation.
Fixes#3660
This enables shaders to (optionally) define their import path inside their source. This has a number of benefits:
1. enables users to define their own custom paths directly in their assets
2. moves the import path "close" to the asset instead of centralized in the plugin definition, which seems "better" to me.
3. makes "internal hot shader reloading" way more reasonable (see #3966)
4. logically opens the door to importing "parts" of a shader by defining "import_path blocks".
```rust
#define_import_path bevy_pbr::mesh_struct
struct Mesh {
model: mat4x4<f32>;
inverse_transpose_model: mat4x4<f32>;
// 'flags' is a bit field indicating various options. u32 is 32 bits so we have up to 32 options.
flags: u32;
};
let MESH_FLAGS_SHADOW_RECEIVER_BIT: u32 = 1u;
```
For some keys, it is too expensive to hash them on every lookup. Historically in Bevy, we have regrettably done the "wrong" thing in these cases (pre-computing hashes, then re-hashing them) because Rust's built in hashed collections don't give us the tools we need to do otherwise. Doing this is "wrong" because two different values can result in the same hash. Hashed collections generally get around this by falling back to equality checks on hash collisions. You can't do that if the key _is_ the hash. Additionally, re-hashing a hash increase the odds of collision!
#3959 needs pre-hashing to be viable, so I decided to finally properly solve the problem. The solution involves two different changes:
1. A new generalized "pre-hashing" solution in bevy_utils: `Hashed<T>` types, which store a value alongside a pre-computed hash. And `PreHashMap<K, V>` (which uses `Hashed<T>` internally) . `PreHashMap` is just an alias for a normal HashMap that uses `Hashed<T>` as the key and a new `PassHash` implementation as the Hasher.
2. Replacing the `std::collections` re-exports in `bevy_utils` with equivalent `hashbrown` impls. Avoiding re-hashes requires the `raw_entry_mut` api, which isn't stabilized yet (and may never be ... `entry_ref` has favor now, but also isn't available yet). If std's HashMap ever provides the tools we need, we can move back to that. The latest version of `hashbrown` adds support for the `entity_ref` api, so we can move to that in preparation for an std migration, if thats the direction they seem to be going in. Note that adding hashbrown doesn't increase our dependency count because it was already in our tree.
In addition to providing these core tools, I also ported the "table identity hashing" in `bevy_ecs` to `raw_entry_mut`, which was a particularly egregious case.
The biggest outstanding case is `AssetPathId`, which stores a pre-hash. We need AssetPathId to be cheaply clone-able (and ideally Copy), but `Hashed<AssetPath>` requires ownership of the AssetPath, which makes cloning ids way more expensive. We could consider doing `Hashed<Arc<AssetPath>>`, but cloning an arc is still a non-trivial expensive that needs to be considered. I would like to handle this in a separate PR. And given that we will be re-evaluating the Bevy Assets implementation in the very near future, I'd prefer to hold off until after that conversation is concluded.
# Objective
- `WgpuOptions` is mutated to be updated with the actual device limits and features, but this information is readily available to both the main and render worlds through the `RenderDevice` which has .limits() and .features() methods
- Information about the adapter in terms of its name, the backend in use, etc were not being exposed but have clear use cases for being used to take decisions about what rendering code to use. For example, if something works well on AMD GPUs but poorly on Intel GPUs. Or perhaps something works well in Vulkan but poorly in DX12.
## Solution
- Stop mutating `WgpuOptions `and don't insert the updated values into the main and render worlds
- Return `AdapterInfo` from `initialize_renderer` and insert it into the main and render worlds
- Use `RenderDevice` limits in the lighting code that was using `WgpuOptions.limits`.
- Renamed `WgpuOptions` to `WgpuSettings`
What is says on the tin.
This has got more to do with making `clippy` slightly more *quiet* than it does with changing anything that might greatly impact readability or performance.
that said, deriving `Default` for a couple of structs is a nice easy win
# Objective
- Support overriding wgpu features and limits that were calculated from default values or queried from the adapter/backend.
- Fixes#3686
## Solution
- Add `disabled_features: Option<wgpu::Features>` to `WgpuOptions`
- Add `constrained_limits: Option<wgpu::Limits>` to `WgpuOptions`
- After maybe obtaining updated features and limits from the adapter/backend in the case of `WgpuOptionsPriority::Functionality`, enable the `WgpuOptions` `features`, disable the `disabled_features`, and constrain the `limits` by `constrained_limits`.
- Note that constraining the limits means for `wgpu::Limits` members named `max_.*` we take the minimum of that which was configured/queried for the backend/adapter and the specified constrained limit value. This means the configured/queried value is used if the constrained limit is larger as that is as much as the device/API supports, or the constrained limit value is used if it is smaller as we are imposing an artificial constraint. For members named `min_.*` we take the maximum instead. For example, a minimum stride might be 256 but we set constrained limit value of 1024, then 1024 is the more conservative value. If the constrained limit value were 16, then 256 would be the more conservative.
# Objective
If a user attempts to `.add_render_command::<P, C>()` on a world that does not contain `DrawFunctions<P>`, the engine panics with a generic `Option::unwrap` message:
```
thread 'main' panicked at 'called `Option::unwrap()` on a `None` value', /[redacted]/bevy/crates/bevy_render/src/render_phase/draw.rs:318:76
```
## Solution
This PR adds a panic message describing the problem:
```
thread 'main' panicked at 'DrawFunctions<outline::MeshStencil> must be added to the world as a resource before adding render commands to it', /[redacted]/bevy/crates/bevy_render/src/render_phase/draw.rs:322:17
```
# Objective
The documentation was unclear but it seemed like it was intended to _only_ flip the texture coordinates of the quad. However, it was also swapping the vertex positions, which resulted in inverted winding order so the front became a back face, and the normal was pointing into the face instead of out of it.
## Solution
- This change makes the only difference the UVs being horizontally flipped.
(cherry picked from commit de943381bd2a8b242c94db99e6c7bbd70006d7c3)
# Objective
The view uniform lacks view transform information. The inverse transform is currently provided but this is not sufficient if you do not have access to an `inverse` function (such as in WGSL).
## Solution
Grab the view transform, put it in the view uniform, use the same matrix to compute the inverse as well.
# Objective
The docs for `{VertexState, FragmentState}::entry_point` stipulate that the entry point function in the shader must return void. This seems to be specific to GLSL; WGSL has no `void` type and its entry point functions return values that describe their output.
## Solution
Remove the mention of the `void` return type.
# Objective
Enable the user to specify any presentation modes (including `Mailbox`).
Fixes#3807
## Solution
I've added a new `PresentMode` enum in `bevy_window` that mirrors the `wgpu` enum 1:1. Alternatively, I could add a new dependency on `wgpu-types` if that would be preferred.
## Objective
When print shader validation error messages, we didn't print the sources and error message text, which led to some confusing error messages.
```cs
error:
┌─ wgsl:15:11
│
15 │ return material.color + 1u;
│ ^^^^^^^^^^^^^^^^^^^^ naga::Expression [11]
```
## Solution
New error message:
```cs
error: Entry point fragment at Vertex is invalid
┌─ wgsl:15:11
│
15 │ return material.color + 1u;
│ ^^^^^^^^^^^^^^^^^^^^ naga::Expression [11]
│
= Expression [11] is invalid
= Operation Add can't work with [8] and [10]
```
# Objective
Add a simple way for user to get the size of a loaded texture in an Image object.
Aims to solve #3689
## Solution
Add a `size() -> Vec2` method
Add two simple tests for this method.
Updates:
. method named changed from `size_2d` to `size`
# Objective
- While it is not safe to enable mappable primary buffers for all GPUs, it should be preferred for integrated GPUs where an integrated GPU is one that is sharing system memory.
## Solution
- Auto-disable mappable primary buffers only for discrete GPUs. If the GPU is integrated and mappable primary buffers are supported, use them.
# Objective
In order to create a glsl shader, we must provide the `naga::ShaderStage` type which is not exported by bevy, meaning a user would have to manually include naga just to access this type.
`pub fn from_glsl(source: impl Into<Cow<'static, str>>, stage: naga::ShaderStage) -> Shader {`
## Solution
Re-rexport naga::ShaderStage from `render_resources`
# Objective
- Allow opting-out of the built-in frustum culling for cases where its behaviour would be incorrect
- Make use of the this in the shader_instancing example that uses a custom instancing method. The built-in frustum culling breaks the custom instancing in the shader_instancing example if the camera is moved to:
```rust
commands.spawn_bundle(PerspectiveCameraBundle {
transform: Transform::from_xyz(12.0, 0.0, 15.0)
.looking_at(Vec3::new(12.0, 0.0, 0.0), Vec3::Y),
..Default::default()
});
```
...such that the Aabb of the cube Mesh that is at the origin goes completely out of view. This incorrectly (for the purpose of the custom instancing) culls the `Mesh` and so culls all instances even though some may be visible.
## Solution
- Add a `NoFrustumCulling` marker component
- Do not compute and add an `Aabb` to `Mesh` entities without an `Aabb` if they have a `NoFrustumCulling` marker component
- Do not apply frustum culling to entities with the `NoFrustumCulling` marker component
# Objective
- When using `WgpuOptionsPriority::Functionality`, which is the default, wgpu::Features::MAPPABLE_PRIMARY_BUFFERS would be automatically enabled. This feature can and does have a significant negative impact on performance for discrete GPUs where resizable bar is not supported, which is a common case. As such, this feature should not be automatically enabled.
- Fixes the performance regression part of https://github.com/bevyengine/bevy/issues/3686 and at least some, if not all cases of https://github.com/bevyengine/bevy/issues/3687
## Solution
- When using `WgpuOptionsPriority::Functionality`, use the adapter-supported features, enable `TEXTURE_ADAPTER_SPECIFIC_FORMAT_FEATURES` and disable `MAPPABLE_PRIMARY_BUFFERS`
Fixed doc comment where render Node input/output methods refered to using `RenderContext` for interaction instead of `RenderGraphContext`
# Objective
The doc comments for `Node` refer to `RenderContext` for slots instead of `RenderGraphContext`, which is only confusing because `Node::run` is passed both `RenderContext` and `RenderGraphContext`
## Solution
Fixed the typo
Super tiny thing. Found this while reviewing #3479.
# Objective
- Simplify code
- Fix the link in the doc comment
## Solution
- Import a single item :)
Co-authored-by: Pascal Hertleif <pascal@technocreatives.com>
# Objective
CI should check for missing backticks in doc comments.
Fixes#3435
## Solution
`clippy` has a lint for this: `doc_markdown`. This enables that lint in the CI script.
Of course, enabling this lint in CI causes a bunch of lint errors, so I've gone through and fixed all of them. This was a huge edit that touched a ton of files, so I split the PR up by crate.
When all of the following are merged, the CI should pass and this can be merged.
+ [x] #3467
+ [x] #3468
+ [x] #3470
+ [x] #3469
+ [x] #3471
+ [x] #3472
+ [x] #3473
+ [x] #3474
+ [x] #3475
+ [x] #3476
+ [x] #3477
+ [x] #3478
+ [x] #3479
+ [x] #3480
+ [x] #3481
+ [x] #3482
+ [x] #3483
+ [x] #3484
+ [x] #3485
+ [x] #3486
#3457 adds the `doc_markdown` clippy lint, which checks doc comments to make sure code identifiers are escaped with backticks. This causes a lot of lint errors, so this is one of a number of PR's that will fix those lint errors one crate at a time.
This PR fixes lints in the `bevy_render` crate.
# Objective
In this PR I added the ability to opt-out graphical backends. Closes#3155.
## Solution
I turned backends into `Option` ~~and removed panicking sub app API to force users handle the error (was suggested by `@cart`)~~.
# Objective
The current 2d rendering is specialized to render sprites, we need a generic way to render 2d items, using meshes and materials like we have for 3d.
## Solution
I cloned a good part of `bevy_pbr` into `bevy_sprite/src/mesh2d`, removed lighting and pbr itself, adapted it to 2d rendering, added a `ColorMaterial`, and modified the sprite rendering to break batches around 2d meshes.
~~The PR is a bit crude; I tried to change as little as I could in both the parts copied from 3d and the current sprite rendering to make reviewing easier. In the future, I expect we could make the sprite rendering a normal 2d material, cleanly integrated with the rest.~~ _edit: see <https://github.com/bevyengine/bevy/pull/3460#issuecomment-1003605194>_
## Remaining work
- ~~don't require mesh normals~~ _out of scope_
- ~~add an example~~ _done_
- support 2d meshes & materials in the UI?
- bikeshed names (I didn't think hard about naming, please check if it's fine)
## Remaining questions
- ~~should we add a depth buffer to 2d now that there are 2d meshes?~~ _let's revisit that when we have an opaque render phase_
- ~~should we add MSAA support to the sprites, or remove it from the 2d meshes?~~ _I added MSAA to sprites since it's really needed for 2d meshes_
- ~~how to customize vertex attributes?~~ _#3120_
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Allow the user to specify the priority when configuring wgpu features/limits and by default use the maximum capabilities of the chosen adapter.
## Solution
- Add a `WgpuOptionsPriority` enum with `Compatibility`, `Functionality` and `WebGL2` options.
- Add a `priority: WgpuOptionsPriority` member to `WgpuOptions`.
- When initialising the renderer, if `WgpuOptions::priority == WgpuOptionsPriority::Functionality`, query the adapter for the available features and limits, use them when creating a device, and update `WgpuOptions` with those values. If `Compatibility` use the behaviour as before this PR. If `WebGL2` then use the WebGL2 downlevel limits as used when when building for wasm, for convenience of testing WebGL2 limits without having to build for wasm.
- Add an environment variable `WGPU_OPTIONS_PRIO` that takes `compatibility`, `functionality`, `webgl2`.
- Default to `WgpuOptionsPriority::Functionality`.
- Insert updated `WgpuOptions` into render app world as well. This is useful for applying the limits when rendering, such as limiting the directional light shadow map texture to 2048x2048 when using WebGL2 downlevel limits but not on wasm.
- Reduced `draw_state` logs from `debug` to `trace` and added `debug` level logs for the wgpu features and limits. Use `RUST_LOG=bevy_render=debug` to see the output.
# Objective
- Add support for loading lights from glTF 2.0 files
## Solution
- This adds support for the KHR_punctual_lights extension which supports point, directional, and spot lights, though we don't yet support spot lights.
- Inserting light bundles when creating scenes required registering some more light bundle component types.
This PR is part of the issue #3492.
# Objective
- Clean up dead code in `bevy_core`.
- Add and update the `bevy_core` documentation to achieve a 100% documentation coverage.
- Add the #![warn(missing_docs)] lint to keep the documentation coverage for the future.
# Solution
- Remove unused `Bytes`, `FromBytes`, `Labels`, and `EntityLabels` types and associated systems.
- Made several types private that really only have use as internal types, mostly pertaining to fixed timestep execution.
- Add and update the bevy_core documentation.
- Add the #![warn(missing_docs)] lint.
# Open Questions
Should more of the internal states of `FixedTimestep` be public? Seems mostly to be an implementation detail unless someone really needs that fixed timestep state.
# Objective
Docs updates.
## Solution
- Detail what `OrthographicCameraBundle::new_2d()` creates.
- Fix a few renamed parameters in comments of `TrackedRenderPass`.
- Add missing comments for viewport and debug markers.
Co-authored-by: Jerome Humbert <djeedai@gmail.com>
# Objective
- `Msaa` was disabled in webgl due to a bug in wgpu
- Bug has been fixed (https://github.com/gfx-rs/wgpu/pull/2307) and backported (https://github.com/gfx-rs/wgpu/pull/2327), and updates for [`wgpu-core`](https://crates.io/crates/wgpu-core/0.12.1) and [`wgpu-hal`](https://crates.io/crates/wgpu-hal/0.12.1) have been released
## Solution
- Remove custom config for `Msaa` in webgl
- I also changed two options that were using the arch instead of the `webgl` feature. it shouldn't change much for webgl, but could help if someone wants to target wasm but not webgl2
Co-authored-by: François <8672791+mockersf@users.noreply.github.com>
