# Objective
I have been trying to check for the existing of some plugins via
`App::is_plugin_added` to conditionally run some behaviour in the
`Plugin::finish` part of my plugin, before realizing that the plugin
registry is actually not available during this step.
This is because the `App::is_plugin_added` using the plugin registry to
check for previous registration.
## Solution
- Switch the `App::is_plugin_added` to use the list of plugin names to
check for previous registrations
- Add a unit test showcasing that `App::is_plugin_added` works during
`Plugin::finish`
# Objective
Both the shedule and winit runners use/reimplement `app_exit_manual`
even tough they can use `app_exit`
## Solution
Nuke `app_exit_manual` from orbit.
# Objective
Closes#13017.
## Solution
- Make `AppExit` a enum with a `Success` and `Error` variant.
- Make `App::run()` return a `AppExit` if it ever returns.
- Make app runners return a `AppExit` to signal if they encountered a
error.
---
## Changelog
### Added
- [`App::should_exit`](https://example.org/)
- [`AppExit`](https://docs.rs/bevy/latest/bevy/app/struct.AppExit.html)
to the `bevy` and `bevy_app` preludes,
### Changed
- [`AppExit`](https://docs.rs/bevy/latest/bevy/app/struct.AppExit.html)
is now a enum with 2 variants (`Success` and `Error`).
- The app's [runner
function](https://docs.rs/bevy/latest/bevy/app/struct.App.html#method.set_runner)
now has to return a `AppExit`.
-
[`App::run()`](https://docs.rs/bevy/latest/bevy/app/struct.App.html#method.run)
now also returns the `AppExit` produced by the runner function.
## Migration Guide
- Replace all usages of
[`AppExit`](https://docs.rs/bevy/latest/bevy/app/struct.AppExit.html)
with `AppExit::Success` or `AppExit::Failure`.
- Any custom app runners now need to return a `AppExit`. We suggest you
return a `AppExit::Error` if any `AppExit` raised was a Error. You can
use the new [`App::should_exit`](https://example.org/) method.
- If not exiting from `main` any other way. You should return the
`AppExit` from `App::run()` so the app correctly returns a error code if
anything fails e.g.
```rust
fn main() -> AppExit {
App::new()
//Your setup here...
.run()
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fixes#13024.
## Solution
- Run `cargo clippy --target wasm32-unknown-unknown` until there are no
more errors.
- I recommend reviewing one commit at a time :)
---
## Changelog
- Fixed Clippy lints for `wasm32-unknown-unknown` target.
- Updated `bevy_transform`'s `README.md`.
# Objective
Improve performance scalability when adding new event types to a Bevy
app. Currently, just using Bevy in the default configuration, all apps
spend upwards of 100+us in the `First` schedule, every app tick,
evaluating if it should update events or not, even if events are not
being used for that particular frame, and this scales with the number of
Events registered in the app.
## Solution
As `Events::update` is guaranteed `O(1)` by just checking if a
resource's value, swapping two Vecs, and then clearing one of them, the
actual cost of running `event_update_system` is *very* cheap. The
overhead of doing system dependency injection, task scheduling ,and the
multithreaded executor outweighs the cost of running the system by a
large margin.
Create an `EventRegistry` resource that keeps a number of function
pointers that update each event. Replace the per-event type
`event_update_system` with a singular exclusive system uses the
`EventRegistry` to update all events instead. Update `SubApp::add_event`
to use `EventRegistry` instead.
## Performance
This speeds reduces the cost of the `First` schedule in both many_foxes
and many_cubes by over 80%. Note this is with system spans on. The
majority of this is now context-switching costs from launching
`time_system`, which should be mostly eliminated with #12869.
The actual `event_update_system` is usually *very* short, using only a
few microseconds on average.
---
## Changelog
TODO
## Migration Guide
TODO
---------
Co-authored-by: Josh Matthews <josh@joshmatthews.net>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Minimize the number of dependencies low in the tree.
## Solution
* Remove the dependency on rustc-hash in bevy_ecs (not used) and
bevy_macro_utils (only used in one spot).
* Deduplicate the dependency on `sha1_smol` with the existing blake3
dependency already being used for bevy_asset.
* Remove the unused `ron` dependency on `bevy_app`
* Make the `serde` dependency for `bevy_ecs` optional. It's only used
for serializing Entity.
* Change the `wgpu` dependency to `wgpu-types`, and make it optional for
`bevy_color`.
* Remove the unused `thread-local` dependency on `bevy_render`.
* Make multiple dependencies for `bevy_tasks` optional and enabled only
when running with the `multi-threaded` feature. Preferably they'd be
disabled all the time on wasm, but I couldn't find a clean way to do
this.
---
## Changelog
TODO
## Migration Guide
TODO
# Objective
- Attempts to solve two items from
https://github.com/bevyengine/bevy/issues/11478.
## Solution
- Moved `intern` module from `bevy_utils` into `bevy_ecs` crate and
updated all relevant imports.
- Moved `label` module from `bevy_utils` into `bevy_ecs` crate and
updated all relevant imports.
---
## Migration Guide
- Replace `bevy_utils::define_label` imports with
`bevy_ecs::define_label` imports.
- Replace `bevy_utils:🏷️:DynEq` imports with
`bevy_ecs:🏷️:DynEq` imports.
- Replace `bevy_utils:🏷️:DynHash` imports with
`bevy_ecs:🏷️:DynHash` imports.
- Replace `bevy_utils::intern::Interned` imports with
`bevy_ecs::intern::Interned` imports.
- Replace `bevy_utils::intern::Internable` imports with
`bevy_ecs::intern::Internable` imports.
- Replace `bevy_utils::intern::Interner` imports with
`bevy_ecs::intern::Interner` imports.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
Fix#11931
## Solution
- Make stepping a non-default feature
- Adjust documentation and examples
- In particular, make the breakout example not show the stepping prompt
if compiled without the feature (shows a log message instead)
---
## Changelog
- Removed `bevy_debug_stepping` from default features
## Migration Guide
The system-by-system stepping feature is now disabled by default; to use
it, enable the `bevy_debug_stepping` feature explicitly:
```toml
[dependencies]
bevy = { version = "0.14", features = ["bevy_debug_stepping"] }
```
Code using
[`Stepping`](https://docs.rs/bevy/latest/bevy/ecs/schedule/struct.Stepping.html)
will still compile with the feature disabled, but will print a runtime
error message to the console if the application attempts to enable
stepping.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
This is a necessary precursor to #9122 (this was split from that PR to
reduce the amount of code to review all at once).
Moving `!Send` resource ownership to `App` will make it unambiguously
`!Send`. `SubApp` must be `Send`, so it can't wrap `App`.
## Solution
Refactor `App` and `SubApp` to not have a recursive relationship. Since
`SubApp` no longer wraps `App`, once `!Send` resources are moved out of
`World` and into `App`, `SubApp` will become unambiguously `Send`.
There could be less code duplication between `App` and `SubApp`, but
that would break `App` method chaining.
## Changelog
- `SubApp` no longer wraps `App`.
- `App` fields are no longer publicly accessible.
- `App` can no longer be converted into a `SubApp`.
- Various methods now return references to a `SubApp` instead of an
`App`.
## Migration Guide
- To construct a sub-app, use `SubApp::new()`. `App` can no longer
convert into `SubApp`.
- If you implemented a trait for `App`, you may want to implement it for
`SubApp` as well.
- If you're accessing `app.world` directly, you now have to use
`app.world()` and `app.world_mut()`.
- `App::sub_app` now returns `&SubApp`.
- `App::sub_app_mut` now returns `&mut SubApp`.
- `App::get_sub_app` now returns `Option<&SubApp>.`
- `App::get_sub_app_mut` now returns `Option<&mut SubApp>.`
# Objective
- Move `PanicHandlerPlugin` into `bevy_app`
- Fixes#12603 .
## Solution
- I moved the `bevy_panic_handler` into `bevy_app`
- Copy pasted `bevy_panic_handler`'s lib.rs into a separate module in
`bevy_app` as a `panic_handler.rs` module file and added the
`PanicHandlerPlugin` in lib.rs of `bevy_app`
- added the dependency into `cargo.toml`
## Review notes
- I probably want some feedback if I imported App and Plugin correctly
in `panic_handler.rs` line 10 and 11.
- As of yet I have not deleted `bevy_panic_handler` crate, wanted to get
a check if I added it correctly.
- Once validated that my move was correct, I'll probably have to remove
the panic handler find default plugins which I probably need some help
to find.
- And then remove bevy panic_handler and making sure ci passes.
- This is my first issue for contributing to bevy so let me know if I am
doing anything wrong.
## tools context
- rust is 1.76 version
- Windows 11
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Resolves#3824. `unsafe` code should be the exception, not the norm in
Rust. It's obviously needed for various use cases as it's interfacing
with platforms and essentially running the borrow checker at runtime in
the ECS, but the touted benefits of Bevy is that we are able to heavily
leverage Rust's safety, and we should be holding ourselves accountable
to that by minimizing our unsafe footprint.
## Solution
Deny `unsafe_code` workspace wide. Add explicit exceptions for the
following crates, and forbid it in almost all of the others.
* bevy_ecs - Obvious given how much unsafe is needed to achieve
performant results
* bevy_ptr - Works with raw pointers, even more low level than bevy_ecs.
* bevy_render - due to needing to integrate with wgpu
* bevy_window - due to needing to integrate with raw_window_handle
* bevy_utils - Several unsafe utilities used by bevy_ecs. Ideally moved
into bevy_ecs instead of made publicly usable.
* bevy_reflect - Required for the unsafe type casting it's doing.
* bevy_transform - for the parallel transform propagation
* bevy_gizmos - For the SystemParam impls it has.
* bevy_assets - To support reflection. Might not be required, not 100%
sure yet.
* bevy_mikktspace - due to being a conversion from a C library. Pending
safe rewrite.
* bevy_dynamic_plugin - Inherently unsafe due to the dynamic loading
nature.
Several uses of unsafe were rewritten, as they did not need to be using
them:
* bevy_text - a case of `Option::unchecked` could be rewritten as a
normal for loop and match instead of an iterator.
* bevy_color - the Pod/Zeroable implementations were replaceable with
bytemuck's derive macros.
# Objective
Currently the built docs only shows the logo and favicon for the top
level `bevy` crate. This makes views like
https://docs.rs/bevy_ecs/latest/bevy_ecs/ look potentially unrelated to
the project at first glance.
## Solution
Reproduce the docs attributes for every crate that Bevy publishes.
Ideally this would be done with some workspace level Cargo.toml control,
but AFAICT, such support does not exist.
# Objective
- Allow registering of systems from Commands with
`Commands::register_one_shot_system`
- Make registering of one shot systems more easy
## Solution
- Add the Command `RegisterSystem` for Commands use.
- Creation of SystemId based on lazy insertion of the System
- Changed the privacy of the fields in SystemId so Commands can return
the SystemId
---
## Changelog
### Added
- Added command `RegisterSystem`
- Added function `Commands::register_one_shot_system`
- Added function `App::register_one_shot_system`
### Changed
- Changed the privacy and the type of struct tuple to regular struct of
SystemId
## Migration Guide
- Changed SystemId fields from tuple struct to a normal struct
If you want to access the entity field, you should use
`SystemId::entity` instead of `SystemId::0`
## Showcase
> Before, if you wanted to register a system with `Commands`, you would
need to do:
```rust
commands.add(|world: &mut World| {
let id = world.register_system(your_system);
// You would need to insert the SystemId inside an entity or similar
})
```
> Now, you can:
```rust
let id = commands.register_one_shot_system(your_system);
// Do what you want with the Id
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Pablo Reinhardt <pabloreinhardt@gmail.com>
# Objective
Fix missing `TextBundle` (and many others) which are present in the main
crate as default features but optional in the sub-crate. See:
- https://docs.rs/bevy/0.13.0/bevy/ui/node_bundles/index.html
- https://docs.rs/bevy_ui/0.13.0/bevy_ui/node_bundles/index.html
~~There are probably other instances in other crates that I could track
down, but maybe "all-features = true" should be used by default in all
sub-crates? Not sure.~~ (There were many.) I only noticed this because
rust-analyzer's "open docs" features takes me to the sub-crate, not the
main one.
## Solution
Add "all-features = true" to docs.rs metadata for crates that use
features.
## Changelog
### Changed
- Unified features documented on docs.rs between main crate and
sub-crates
# Objective
Make bevy_utils less of a compilation bottleneck. Tackle #11478.
## Solution
* Move all of the directly reexported dependencies and move them to
where they're actually used.
* Remove the UUID utilities that have gone unused since `TypePath` took
over for `TypeUuid`.
* There was also a extraneous bytemuck dependency on `bevy_core` that
has not been used for a long time (since `encase` became the primary way
to prepare GPU buffers).
* Remove the `all_tuples` macro reexport from bevy_ecs since it's
accessible from `bevy_utils`.
---
## Changelog
Removed: Many of the reexports from bevy_utils (petgraph, uuid, nonmax,
smallvec, and thiserror).
Removed: bevy_core's reexports of bytemuck.
## Migration Guide
bevy_utils' reexports of petgraph, uuid, nonmax, smallvec, and thiserror
have been removed.
bevy_core' reexports of bytemuck's types has been removed.
Add them as dependencies in your own crate instead.
# Objective
- Resolves#11309
## Solution
- Add `bevy_dev_tools` crate as a default feature.
- Add `DevToolsPlugin` and add it to an app if the `bevy_dev_tools`
feature is enabled.
`bevy_dev_tools` is reserved by @alice-i-cecile, should we wait until it
gets transferred to cart before merging?
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
# Objective
Memory usage optimisation
## Solution
`HashMap` and `HashSet`'s keys are immutable. So using mutable types
like `String`, `Vec<T>`, or `PathBuf` as a key is a waste of memory:
they have an extra `usize` for their capacity and may have spare
capacity.
This PR replaces these types by their immutable equivalents `Box<str>`,
`Box<[T]>`, and `Box<Path>`.
For more context, I recommend watching the [Use Arc Instead of
Vec](https://www.youtube.com/watch?v=A4cKi7PTJSs) video.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
- Fixes#751
## Solution
- Added `PluginGroupBuilder::add_group`, which accepts an owned `impl
PluginGroup` and adds those plugins to self, following
`PluginGroupBuilder::add`'s replacement rules.
- Split `PluginGroupBuilder::upsert_plugin_state` into two functions,
one of the same name, and
`PluginGroupBuilder::upsert_plugin_entry_state` which takes a
`PluginEntry` and `TypeId` directly. This allows for shared behaviour
between `add` and `add_group`.
- Added 2 unit tests documenting the replacement behaviour in
`PluginGroupBuilder::add_group`.
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Add the new `-Zcheck-cfg` checks to catch more warnings
- Fixes#12091
## Solution
- Create a new `cfg-check` to the CI that runs `cargo check -Zcheck-cfg
--workspace` using cargo nightly (and fails if there are warnings)
- Fix all warnings generated by the new check
---
## Changelog
- Remove all redundant imports
- Fix cfg wasm32 targets
- Add 3 dead code exceptions (should StandardColor be unused?)
- Convert ios_simulator to a feature (I'm not sure if this is the right
way to do it, but the check complained before)
## Migration Guide
No breaking changes
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Fixes#12016.
Bump version after release
This PR has been auto-generated
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
Improve code quality and performance
## Solution
Instead of using `plugin.downcast_ref::<T>().is_some()` in
`App::is_plugin_added`, use `plugin.is::<T>()`. Which is more performant
and cleaner.
Use `TypeIdMap<T>` instead of `HashMap<TypeId, T>`
- ~~`TypeIdMap` was in `bevy_ecs`. I've kept it there because of
#11478~~
- ~~I haven't swapped `bevy_reflect` over because it doesn't depend on
`bevy_ecs`, but I'd also be happy with moving `TypeIdMap` to
`bevy_utils` and then adding a dependency to that~~
- ~~this is a slight change in the public API of
`DrawFunctionsInternal`, does this need to go in the changelog?~~
## Changelog
- moved `TypeIdMap` to `bevy_utils`
- changed `DrawFunctionsInternal::indices` to `TypeIdMap`
## Migration Guide
- `TypeIdMap` now lives in `bevy_utils`
- `DrawFunctionsInternal::indices` now uses a `TypeIdMap`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Currently the `missing_docs` lint is allowed-by-default and enabled at
crate level when their documentations is complete (see #3492).
This PR proposes to inverse this logic by making `missing_docs`
warn-by-default and mark crates with imcomplete docs allowed.
## Solution
Makes `missing_docs` warn at workspace level and allowed at crate level
when the docs is imcomplete.
# Objective
Add interactive system debugging capabilities to bevy, providing
step/break/continue style capabilities to running system schedules.
* Original implementation: #8063
- `ignore_stepping()` everywhere was too much complexity
* Schedule-config & Resource discussion: #8168
- Decided on selective adding of Schedules & Resource-based control
## Solution
Created `Stepping` Resource. This resource can be used to enable
stepping on a per-schedule basis. Systems within schedules can be
individually configured to:
* AlwaysRun: Ignore any stepping state and run every frame
* NeverRun: Never run while stepping is enabled
- this allows for disabling of systems while debugging
* Break: If we're running the full frame, stop before this system is run
Stepping provides two modes of execution that reflect traditional
debuggers:
* Step-based: Only execute one system at a time
* Continue/Break: Run all systems, but stop before running a system
marked as Break
### Demo
https://user-images.githubusercontent.com/857742/233630981-99f3bbda-9ca6-4cc4-a00f-171c4946dc47.mov
Breakout has been modified to use Stepping. The game runs normally for a
couple of seconds, then stepping is enabled and the game appears to
pause. A list of Schedules & Systems appears with a cursor at the first
System in the list. The demo then steps forward full frames using the
spacebar until the ball is about to hit a brick. Then we step system by
system as the ball impacts a brick, showing the cursor moving through
the individual systems. Finally the demo switches back to frame stepping
as the ball changes course.
### Limitations
Due to architectural constraints in bevy, there are some cases systems
stepping will not function as a user would expect.
#### Event-driven systems
Stepping does not support systems that are driven by `Event`s as events
are flushed after 1-2 frames. Although game systems are not running
while stepping, ignored systems are still running every frame, so events
will be flushed.
This presents to the user as stepping the event-driven system never
executes the system. It does execute, but the events have already been
flushed.
This can be resolved by changing event handling to use a buffer for
events, and only dropping an event once all readers have read it.
The work-around to allow these systems to properly execute during
stepping is to have them ignore stepping:
`app.add_systems(event_driven_system.ignore_stepping())`. This was done
in the breakout example to ensure sound played even while stepping.
#### Conditional Systems
When a system is stepped, it is given an opportunity to run. If the
conditions of the system say it should not run, it will not.
Similar to Event-driven systems, if a system is conditional, and that
condition is only true for a very small time window, then stepping the
system may not execute the system. This includes depending on any sort
of external clock.
This exhibits to the user as the system not always running when it is
stepped.
A solution to this limitation is to ensure any conditions are consistent
while stepping is enabled. For example, all systems that modify any
state the condition uses should also enable stepping.
#### State-transition Systems
Stepping is configured on the per-`Schedule` level, requiring the user
to have a `ScheduleLabel`.
To support state-transition systems, bevy generates needed schedules
dynamically. Currently it’s very difficult (if not impossible, I haven’t
verified) for the user to get the labels for these schedules.
Without ready access to the dynamically generated schedules, and a
resolution for the `Event` lifetime, **stepping of the state-transition
systems is not supported**
---
## Changelog
- `Schedule::run()` updated to consult `Stepping` Resource to determine
which Systems to run each frame
- Added `Schedule.label` as a `BoxedSystemLabel`, along with supporting
`Schedule::set_label()` and `Schedule::label()` methods
- `Stepping` needed to know which `Schedule` was running, and prior to
this PR, `Schedule` didn't track its own label
- Would have preferred to add `Schedule::with_label()` and remove
`Schedule::new()`, but this PR touches enough already
- Added calls to `Schedule.set_label()` to `App` and `World` as needed
- Added `Stepping` resource
- Added `Stepping::begin_frame()` system to `MainSchedulePlugin`
- Run before `Main::run_main()`
- Notifies any `Stepping` Resource a new render frame is starting
## Migration Guide
- Add a call to `Schedule::set_label()` for any custom `Schedule`
- This is only required if the `Schedule` will be stepped
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fix an issue where events are not being dropped after being read. I
believe #10077 introduced this issue. The code currently works as
follows:
1. `EventUpdateSignal` is **shared for all event types**
2. During the fixed update phase, `EventUpdateSignal` is set to true
3. `event_update_system`, **unique per event type**, runs to update
Events<T>
4. `event_update_system` reads value of `EventUpdateSignal` to check if
it should update, and then **resets** the value to false
If there are multiple event types, the first `event_update_system` run
will reset the shared `EventUpdateSignal` signal, preventing other
events from being cleared.
## Solution
I've updated the code to have separate signals per event type and added
a shared signal to notify all systems that the time plugin is installed.
## Changelog
- Fixed bug where events were not being dropped
# Objective
Plugins are an incredible tool for encapsulating functionality. They are
low-key one of Bevy's best features. Combined with rust's module and
privacy system, it's a match made in heaven.
The one downside is that they can be a little too verbose to define. 90%
of all plugin definitions look something like this:
```rust
pub struct MyPlugin;
impl Plugin for MyPlugin {
fn build(&self, app: &mut App) {
app.init_resource::<CameraAssets>()
.add_event::<SetCamera>()
.add_systems(Update, (collect_set_camera_events, drive_camera).chain());
}
}
```
Every so often it gets a little spicier:
```rust
pub struct MyGenericPlugin<T>(PhantomData<T>);
impl<T> Default for MyGenericPlugin<T> {
fn default() -> Self { ... }
}
impl<T> Plugin for MyGenericPlugin<T> { ... }
```
This is an annoying amount of boilerplate. Ideally, plugins should be
focused and small in scope, which means any app is going to have a *lot*
of them. Writing a plugin should be as easy as possible, and the *only*
part of this process that carries any meaning is the body of `fn build`.
## Solution
Implement `Plugin` for functions that take `&mut App` as a parameter.
The two examples above now look like this:
```rust
pub fn my_plugin(app: &mut App) {
app.init_resource::<CameraAssets>()
.add_event::<SetCamera>()
.add_systems(Update, (collect_set_camera_events, drive_camera).chain());
}
pub fn my_generic_plugin<T>(app: &mut App) {
// No need for PhantomData, it just works.
}
```
Almost all plugins can be written this way, which I believe will make
bevy code much more attractive. Less boilerplate and less meaningless
indentation. More plugins with smaller scopes.
---
## Changelog
The `Plugin` trait is now implemented for all functions that take `&mut
App` as their only parameter. This is an abbreviated way of defining
plugins with less boilerplate than manually implementing the trait.
---------
Co-authored-by: Federico Rinaldi <gisquerin@gmail.com>
# Objective
While working on #11527 I spotted that the internal field for the label
of a `Schedule` is called `name`. Using `label` seems more in line with
the other naming across Bevy.
## Solution
Renaming the field was straightforward since it's not exposed outside of
the module. This also means a changelog or migration guide isn't
necessary.
# Objective
Fixes#11411
## Solution
- Added a simple example how to create and configure custom schedules
that are run by the `Main` schedule.
- Spot checked some of the API docs used, fixed `App::add_schedule` docs
that referred to a function argument that was removed by #9600.
## Open Questions
- While spot checking the docs, I noticed that the `Schedule` label is
stored in a field called `name` instead of `label`. This seems
unintuitive since the term label is used everywhere else. Should we
change that field name? It was introduced in #9600. If so, I do think
this change would be out of scope for this PR that mainly adds the
example.
# Objective
- Make it possible to react to arbitrary state changes
- this will be useful regardless of the other changes to states
currently being discussed
## Solution
- added `StateTransitionEvent<S>` struct
- previously, this would have been impossible:
```rs
#[derive(States, Eq, PartialEq, Hash, Copy, Clone, Default)]
enum MyState {
#[default]
Foo,
Bar(MySubState),
}
enum MySubState {
Spam,
Eggs,
}
app.add_system(Update, on_enter_bar);
fn on_enter_bar(trans: EventReader<StateTransition<MyState>>){
for (befoare, after) in trans.read() {
match before, after {
MyState::Foo, MyState::Bar(_) => info!("detected transition foo => bar");
_, _ => ();
}
}
}
```
---
## Changelog
- Added
- `StateTransitionEvent<S>` - Fired on state changes of `S`
## Migration Guide
N/A no breaking changes
---------
Co-authored-by: Federico Rinaldi <gisquerin@gmail.com>
# Objective
There are a lot of doctests that are `ignore`d for no documented reason.
And that should be fixed.
## Solution
I searched the bevy repo with the regex ` ```[a-z,]*ignore ` in order to
find all `ignore`d doctests. For each one of the `ignore`d doctests, I
did the following steps:
1. Attempt to remove the `ignored` attribute while still passing the
test. I did this by adding hidden dummy structs and imports.
2. If step 1 doesn't work, attempt to replace the `ignored` attribute
with the `no_run` attribute while still passing the test.
3. If step 2 doesn't work, keep the `ignored` attribute but add
documentation for why the `ignored` attribute was added.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Fix#10731.
## Solution
Rename `App::add_state<T>(&mut self)` to `init_state`, and add
`App::insert_state<T>(&mut self, state: T)`. I decided on these names
because they are more similar to `init_resource` and `insert_resource`.
I also removed the `States` trait's requirement for `Default`. Instead,
`init_state` requires `FromWorld`.
---
## Changelog
- Renamed `App::add_state` to `init_state`.
- Added `App::insert_state`.
- Removed the `States` trait's requirement for `Default`.
## Migration Guide
- Renamed `App::add_state` to `init_state`.
# Objective
- Update winit dependency to 0.29
## Changelog
### KeyCode changes
- Removed `ScanCode`, as it was [replaced by
KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292).
- `ReceivedCharacter.char` is now a `SmolStr`, [relevant
doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text).
- Changed most `KeyCode` values, and added more.
KeyCode has changed meaning. With this PR, it refers to physical
position on keyboard rather than the printed letter on keyboard keys.
In practice this means:
- On QWERTY keyboard layouts, nothing changes
- On any other keyboard layout, `KeyCode` no longer reflects the label
on key.
- This is "good". In bevy 0.12, when you used WASD for movement, users
with non-QWERTY keyboards couldn't play your game! This was especially
bad for non-latin keyboards. Now, WASD represents the physical keys. A
French player will press the ZQSD keys, which are near each other,
Kyrgyz players will use "Цфыв".
- This is "bad" as well. You can't know in advance what the label of the
key for input is. Your UI says "press WASD to move", even if in reality,
they should be pressing "ZQSD" or "Цфыв". You also no longer can use
`KeyCode` for text inputs. In any case, it was a pretty bad API for text
input. You should use `ReceivedCharacter` now instead.
### Other changes
- Use `web-time` rather than `instant` crate.
(https://github.com/rust-windowing/winit/pull/2836)
- winit did split `run_return` in `run_onDemand` and `pump_events`, I
did the same change in bevy_winit and used `pump_events`.
- Removed `return_from_run` from `WinitSettings` as `winit::run` now
returns on supported platforms.
- I left the example "return_after_run" as I think it's still useful.
- This winit change is done partly to allow to create a new window after
quitting all windows: https://github.com/emilk/egui/issues/1918 ; this
PR doesn't address.
- added `width` and `height` properties in the `canvas` from wasm
example
(https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168)
## Known regressions (important follow ups?)
- Provide an API for reacting when a specific key from current layout
was released.
- possible solutions: use winit::Key from winit::KeyEvent ; mapping
between KeyCode and Key ; or .
- We don't receive characters through alt+numpad (e.g. alt + 151 = "ù")
anymore ; reproduced on winit example "ime". maybe related to
https://github.com/rust-windowing/winit/issues/2945
- (windows) Window content doesn't refresh at all when resizing. By
reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect
we should just fire a `window.request_redraw();` from `AboutToWait`, and
handle actual redrawing within `RedrawRequested`. I'm not sure how to
move all that code so I'd appreciate it to be a follow up.
- (windows) unreleased winit fix for using set_control_flow in
AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm
not sure what the implications are, but that feels bad 🤔
## Follow up
I'd like to avoid bloating this PR, here are a few follow up tasks
worthy of a separate PR, or new issue to track them once this PR is
closed, as they would either complicate reviews, or at risk of being
controversial:
- remove CanvasParentResizePlugin
(https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856)
- avoid mentionning explicitly winit in docs from bevy_window ?
- NamedKey integration on bevy_input:
https://github.com/rust-windowing/winit/pull/3143 introduced a new
NamedKey variant. I implemented it only on the converters but we'd
benefit making the same changes to bevy_input.
- Add more info in KeyboardInput
https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313
- https://github.com/bevyengine/bevy/pull/9905 added a workaround on a
bug allegedly fixed by winit 0.29. We should check if it's still
necessary.
- update to raw_window_handle 0.6
- blocked by wgpu
- Rename `KeyCode` to `PhysicalKeyCode`
https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015
- remove `instant` dependency, [replaced
by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd
need to update to :
- fastrand >= 2.0
- [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7
- [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0
- Verify license, see
[discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800)
- we might be missing a short notice or description of changes made
- Consider using https://github.com/rust-windowing/cursor-icon directly
rather than vendoring it in bevy.
- investigate [this
unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986)
(`winit_window.canvas().unwrap();`)
- Use more good things about winit's update
- https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428
## Migration Guide
This PR should have one.
Fixes https://github.com/bevyengine/bevy/issues/10974
# Objective
Duplicate the ordering logic of the `Main` schedule into the `FixedMain`
schedule.
---
## Changelog
- `FixedUpdate` is no longer the main schedule ran in
`RunFixedUpdateLoop`, `FixedMain` has replaced this and has a similar
structure to `Main`.
## Migration Guide
- Usage of `RunFixedUpdateLoop` should be renamed to `RunFixedMainLoop`.
# Objective
Fixes#10968
## Solution
Pull startup schedules from a list of `ScheduleLabel`s in the same way
the update schedules are handled.
---
## Changelog
- Added `MainScheduleOrder::startup_labels` to allow the editing of the
startup schedule order.
## Migration Guide
- Added a new field to `MainScheduleOrder`, `startup_labels`, for
editing the startup schedule order.
# Objective
- Shorten paths by removing unnecessary prefixes
## Solution
- Remove the prefixes from many paths which do not need them. Finding
the paths was done automatically using built-in refactoring tools in
Jetbrains RustRover.
## Objective
Currently, events are dropped after two frames. This cadence wasn't
*chosen* for a specific reason, double buffering just lets events
persist for at least two frames. Events only need to be dropped at a
predictable point so that the event queues don't grow forever (i.e.
events should never cause a memory leak).
Events (and especially input events) need to be observable by systems in
`FixedUpdate`, but as-is events are dropped before those systems even
get a chance to see them.
## Solution
Instead of unconditionally dropping events in `First`, require
`FixedUpdate` to first queue the buffer swap (if the `TimePlugin` has
been installed). This way, events are only dropped after a frame that
runs `FixedUpdate`.
## Future Work
In the same way we have independent copies of `Time` for tracking time
in `Main` and `FixedUpdate`, we will need independent copies of `Input`
for tracking press/release status correctly in `Main` and `FixedUpdate`.
--
Every run of `FixedUpdate` covers a specific timespan. For example, if
the fixed timestep `Δt` is 10ms, the first three `FixedUpdate` runs
cover `[0ms, 10ms)`, `[10ms, 20ms)`, and `[20ms, 30ms)`.
`FixedUpdate` can run many times in one frame. For truly
framerate-independent behavior, each `FixedUpdate` should only see the
events that occurred in its covered timespan, but what happens right now
is the first step in the frame reads all pending events.
Fixing that will require timestamped events.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
I incorrectly assumed that moving a system from `Update` to
`FixedUpdate` would simplify logic without hurting performance.
But this is not the case: if there's single-threaded long computation in
the `FixedUpdate`, the machine won't do anything else in parallel with
it. Which might be not what users expect.
So this PR adds a note. But maybe it is obvious, I don't know.
# Objective
- Standardize fmt for toml files
## Solution
- Add [taplo](https://taplo.tamasfe.dev/) to CI (check for fmt and diff
for toml files), for context taplo is used by the most popular extension
in VScode [Even Better
TOML](https://marketplace.visualstudio.com/items?itemName=tamasfe.even-better-toml
- Add contribution section to explain toml fmt with taplo.
Now to pass CI you need to run `taplo fmt --option indent_string=" "` or
if you use vscode have the `Even Better TOML` extension with 4 spaces
for indent
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fix adding `#![allow(clippy::type_complexity)]` everywhere. like #9796
## Solution
- Use the new [lints] table that will land in 1.74
(https://doc.rust-lang.org/nightly/cargo/reference/unstable.html#lints)
- inherit lint to the workspace, crates and examples.
```
[lints]
workspace = true
```
## Changelog
- Bump rust version to 1.74
- Enable lints table for the workspace
```toml
[workspace.lints.clippy]
type_complexity = "allow"
```
- Allow type complexity for all crates and examples
```toml
[lints]
workspace = true
```
---------
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
Bevy introduced unintentional breaking behaviour along with the v0.12.0
release regarding the `App::set_runner` API. See: #10385, #10389 for
details. We weren't able to catch this before release because this API
is only used internally in one or two places (the very places which
motivated the break).
This commit adds a regression test to help guarantee some expected
behaviour for custom runners, namely that `app::update` won't be called
before the runner has a chance to initialise state.
