# Objective
The migration process for `bevy_color` (#12013) will be fairly involved:
there will be hundreds of affected files, and a large number of APIs.
## Solution
To allow us to proceed granularly, we're going to keep both
`bevy_color::Color` (new) and `bevy_render::Color` (old) around until
the migration is complete.
However, simply doing this directly is confusing! They're both called
`Color`, making it very hard to tell when a portion of the code has been
ported.
As discussed in #12056, by renaming the old `Color` type, we can make it
easier to gradually migrate over, one API at a time.
## Migration Guide
THIS MIGRATION GUIDE INTENTIONALLY LEFT BLANK.
This change should not be shipped to end users: delete this section in
the final migration guide!
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
- Example reflection_probe is not frame rate independent
## Solution
- Use time delta to rotate the camera, use the same rotation speed as
the load_gltf example
31d7fcd9cb/examples/3d/load_gltf.rs (L63)
---
# Objective
Move Gizmo examples into the separate directory
Fixes#11899
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
While doing a bunch of testing on examples, I noticed that this
particular example had lots of room for improvement. This example is
shown in example showcase, so it might as well look nice.
- The "overflow containers" have no vertical separation from each other
- The "overflow containers" are aligned awkwardly
- The instructions say you can "toggle" overflow, but it's actually
cycling through various overflow modes, with no indication of which mode
is currently active.
- The UI structure could be simplified
## Solution
- Simplify the UI structure by
- Moving the instructions into an absolutely positioned node, which we
do in most other examples with instructions
- Using a grid layout and removing some unnecessary containers
- Show the current overflow mode
- Add a gap between the overflow containers
- Other misc cleanup
## Before / After
<img width="1280" alt="Screenshot 2024-02-15 at 9 48 02 AM"
src="https://github.com/bevyengine/bevy/assets/200550/046e53b3-f744-48a2-b5ac-24b3f35b64ca">
<img width="1280" alt="Screenshot 2024-02-15 at 9 48 26 AM"
src="https://github.com/bevyengine/bevy/assets/200550/7e5e4ecf-dd1d-440a-b4a8-dd43bee3ef0a">
# Objective
- Closes#9384.
## Solution
- Make the movement speed of the `CameraController` adjustable with the
scroll wheel as mentioned
[here](https://github.com/bevyengine/bevy/issues/9384#issuecomment-1668957931).
The speed use an exponential progression (10% increase per scroll tick
by default) to allow adapting the speed to different scales.
- For the `scene_viewer` example, make the default speed proportional to
the size of the scene using what's computed for the default camera
placement. This gives a good enough default to fly over the scene from
the outside. I don't think there's a good way to get a default speed
fitting for all scenes since some are meant to be viewed from outside
while other are traversable environments.
# Objective
Presently, it is possible to cause the `text_input` example to panic by
pressing enter too quickly. This happens because, under these
circumstances, the `listen_keyboard_input_events` system spawns multiple
text entry entities where the `listen_received_character_events` system
expects there to only ever be one. As this is an example this PR aims to
highlight this risk and mitigate it.
## Solution
Modify the example so that if a text entry has been spawned already
during this run of the system then further Enter input events are
ignored this run.
# Objective
Bevy's animation system currently does tree traversals based on `Name`
that aren't necessary. Not only do they require in unsafe code because
tree traversals are awkward with parallelism, but they are also somewhat
slow, brittle, and complex, which manifested itself as way too many
queries in #11670.
# Solution
Divide animation into two phases: animation *advancement* and animation
*evaluation*, which run after one another. *Advancement* operates on the
`AnimationPlayer` and sets the current animation time to match the game
time. *Evaluation* operates on all animation bones in the scene in
parallel and sets the transforms and/or morph weights based on the time
and the clip.
To do this, we introduce a new component, `AnimationTarget`, which the
asset loader places on every bone. It contains the ID of the entity
containing the `AnimationPlayer`, as well as a UUID that identifies
which bone in the animation the target corresponds to. In the case of
glTF, the UUID is derived from the full path name to the bone. The rule
that `AnimationTarget`s are descendants of the entity containing
`AnimationPlayer` is now just a convention, not a requirement; this
allows us to eliminate the unsafe code.
# Migration guide
* `AnimationClip` now uses UUIDs instead of hierarchical paths based on
the `Name` component to refer to bones. This has several consequences:
- A new component, `AnimationTarget`, should be placed on each bone that
you wish to animate, in order to specify its UUID and the associated
`AnimationPlayer`. The glTF loader automatically creates these
components as necessary, so most uses of glTF rigs shouldn't need to
change.
- Moving a bone around the tree, or renaming it, no longer prevents an
`AnimationPlayer` from affecting it.
- Dynamically changing the `AnimationPlayer` component will likely
require manual updating of the `AnimationTarget` components.
* Entities with `AnimationPlayer` components may now possess descendants
that also have `AnimationPlayer` components. They may not, however,
animate the same bones.
* As they aren't specific to `TypeId`s,
`bevy_reflect::utility::NoOpTypeIdHash` and
`bevy_reflect::utility::NoOpTypeIdHasher` have been renamed to
`bevy_reflect::utility::NoOpHash` and
`bevy_reflect::utility::NoOpHasher` respectively.
# Objective
- The `transform.translation` of a `TextBundle` in this example is
unnecessarily set to the same constant position over and over in each
`Update`. Newbies might be confused as to why this translation is being
performed over and over.
## Solution
- perform the translation only once, when the `Text2dBundle` is
instantiated
# Objective
- `#[reflect(FromWorld)]` was added to `ComponentB` somewhere between
`v0.12.1` and `v0.13.0`, but it is unnecessary
## Solution
- remove the unnecessary `FromWorld`
# Objective
- revert a single-line change made to `examples/asset/asset_loading`
example between `v0.12.1` release and `v0.13.0` release which resulted
in a too-bright, washed-out rendering
## Solution
- reverted the changes made to this example between `v0.12.1` and
`v0.13.0`
# Objective
Fixes two small quality issues:
1. With the new default ev100 exposure value, the irradiance intensity
was too low
2. The camera was rotating at a fixed speed (instead of a speed
multiplied by delta time), resulting in frame-rate dependent rotation
speed.
# Objective
Fixes#11846
## Solution
Add a `synchronous_pipeline_compilation ` field to `RenderPlugin`,
defaulting to `false`.
Most of the diff is whitespace.
## Changelog
Added `synchronous_pipeline_compilation ` to `RenderPlugin` for
disabling async pipeline creation.
## Migration Guide
TODO: consider combining this with the guide for #11846
`RenderPlugin` has a new `synchronous_pipeline_compilation ` property.
The default value is `false`. Set this to `true` if you want to retain
the previous synchronous behavior.
---------
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
#10644 introduced nice "statically typed" labels that replace the old
strings. I would like to propose some changes to the names introduced:
* `SubGraph2d` -> `Core2d` and `SubGraph3d` -> `Core3d`. The names of
these graphs have been / should continue to be the "core 2d" graph not
the "sub graph 2d" graph. The crate is called `bevy_core_pipeline`, the
modules are still `core_2d` and `core_3d`, etc.
* `Labels2d` and `Labels3d`, at the very least, should not be plural to
follow naming conventions. A Label enum is not a "collection of labels",
it is a _specific_ Label. However I think `Label2d` and `Label3d` is
significantly less clear than `Node2d` and `Node3d`, so I propose those
changes here. I've done the same for `LabelsPbr` -> `NodePbr` and
`LabelsUi` -> `NodeUi`
Additionally, #10644 accidentally made one of the Camera2dBundle
constructors use the 3D graph instead of the 2D graph. I've fixed that
here.
---
## Changelog
* Renamed `SubGraph2d` -> `Core2d`, `SubGraph3d` -> `Core3d`, `Labels2d`
-> `Node2d`, `Labels3d` -> `Node3d`, `LabelsUi` -> `NodeUi`, `LabelsPbr`
-> `NodePbr`
# Objective
After adding configurable exposure, we set the default ev100 value to
`7` (indoor). This brought us out of sync with Blender's configuration
and defaults. This PR changes the default to `9.7` (bright indoor or
very overcast outdoors), as I calibrated in #11577. This feels like a
very reasonable default.
The other changes generally center around tweaking Bevy's lighting
defaults and examples to play nicely with this number, alongside a few
other tweaks and improvements.
Note that for artistic reasons I have reverted some examples, which
changed to directional lights in #11581, back to point lights.
Fixes#11577
---
## Changelog
- Changed `Exposure::ev100` from `7` to `9.7` to better match Blender
- Renamed `ExposureSettings` to `Exposure`
- `Camera3dBundle` now includes `Exposure` for discoverability
- Bumped `FULL_DAYLIGHT ` and `DIRECT_SUNLIGHT` to represent the
middle-to-top of those ranges instead of near the bottom
- Added new `AMBIENT_DAYLIGHT` constant and set that as the new
`DirectionalLight` default illuminance.
- `PointLight` and `SpotLight` now have a default `intensity` of
1,000,000 lumens. This makes them actually useful in the context of the
new "semi-outdoor" exposure and puts them in the "cinema lighting"
category instead of the "common household light" category. They are also
reasonably close to the Blender default.
- `AmbientLight` default has been bumped from `20` to `80`.
## Migration Guide
- The increased `Exposure::ev100` means that all existing 3D lighting
will need to be adjusted to match (DirectionalLights, PointLights,
SpotLights, EnvironmentMapLights, etc). Or alternatively, you can adjust
the `Exposure::ev100` on your cameras to work nicely with your current
lighting values. If you are currently relying on default intensity
values, you might need to change the intensity to achieve the same
effect. Note that in Bevy 0.12, point/spot lights had a different hard
coded ev100 value than directional lights. In Bevy 0.13, they use the
same ev100, so if you have both in your scene, the _scale_ between these
light types has changed and you will likely need to adjust one or both
of them.
# Objective
We recently got some neat new 2d shapes and the shapes are no longer
centered on the screen.
The hardcoded positions and colors are a pain to deal with when a new
shape is added.
## Solution
Delete a bunch of code and position shapes evenly. Assign colors evenly
too.
## Before
<img width="1280" alt="Screenshot 2024-02-14 at 3 17 40 PM"
src="https://github.com/bevyengine/bevy/assets/200550/cc9fd9a8-4019-4907-a50e-621cb656c20a">
## After
<img width="1280" alt="Screenshot 2024-02-14 at 3 17 24 PM"
src="https://github.com/bevyengine/bevy/assets/200550/033a3f91-d3bc-4ec8-af59-42a221f8b8e7">
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
Fix https://github.com/bevyengine/bevy/issues/11577.
## Solution
Fix the examples, add a few constants to make setting light values
easier, and change the default lighting settings to be more realistic.
(Now designed for an overcast day instead of an indoor environment)
---
I did not include any example-related changes in here.
## Changelogs (not including breaking changes)
### bevy_pbr
- Added `light_consts` module (included in prelude), which contains
common lux and lumen values for lights.
- Added `AmbientLight::NONE` constant, which is an ambient light with a
brightness of 0.
- Added non-EV100 variants for `ExposureSettings`'s EV100 constants,
which allow easier construction of an `ExposureSettings` from a EV100
constant.
## Breaking changes
### bevy_pbr
The several default lighting values were changed:
- `PointLight`'s default `intensity` is now `2000.0`
- `SpotLight`'s default `intensity` is now `2000.0`
- `DirectionalLight`'s default `illuminance` is now
`light_consts::lux::OVERCAST_DAY` (`1000.`)
- `AmbientLight`'s default `brightness` is now `20.0`
I just implemented this to record a video for the new blog post, but I
figured it would also make a good dedicated example. This also allows us
to remove a lot of code from the 2d/3d gizmo examples since it
supersedes this portion of code.
Depends on: https://github.com/bevyengine/bevy/pull/11699
Make the renamings/changes regarding texture atlases a bit less
confusing by calling `TextureAtlasLayout` a layout, not a texture atlas.
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
This fixes a `FIXME` in `extract_meshes` and results in a performance
improvement.
As a result of this change, meshes in the render world might not be
attached to entities anymore. Therefore, the `entity` parameter to
`RenderCommand::render()` is now wrapped in an `Option`. Most
applications that use the render app's ECS can simply unwrap the
`Option`.
Note that for now sprites, gizmos, and UI elements still use the render
world as usual.
## Migration guide
* For efficiency reasons, some meshes in the render world may not have
corresponding `Entity` IDs anymore. As a result, the `entity` parameter
to `RenderCommand::render()` is now wrapped in an `Option`. Custom
rendering code may need to be updated to handle the case in which no
`Entity` exists for an object that is to be rendered.
> Follow up to #11600 and #10588
@mockersf expressed some [valid
concerns](https://github.com/bevyengine/bevy/pull/11600#issuecomment-1932796498)
about the current system this PR attempts to fix:
The `ComputedTextureSlices` reacts to asset change in both `bevy_sprite`
and `bevy_ui`, meaning that if the `ImageScaleMode` is inserted by
default in the bundles, we will iterate through most 2d items every time
an asset is updated.
# Solution
- `ImageScaleMode` only has two variants: `Sliced` and `Tiled`. I
removed the `Stretched` default
- `ImageScaleMode` is no longer part of any bundle, but the relevant
bundles explain that this additional component can be inserted
This way, the *absence* of `ImageScaleMode` means the image will be
stretched, and its *presence* will include the entity to the various
slicing systems
Optional components in bundles would make this more straigthfoward
# Additional work
Should I add new bundles with the `ImageScaleMode` component ?
# Objective
#11431 and #11688 implemented meshing support for Bevy's new geometric
primitives. The next step is to deprecate the shapes in
`bevy_render::mesh::shape` and to later remove them completely for 0.14.
## Solution
Deprecate the shapes and reduce code duplication by utilizing the
primitive meshing API for the old shapes where possible.
Note that some shapes have behavior that can't be exactly reproduced
with the new primitives yet:
- `Box` is more of an AABB with min/max extents
- `Plane` supports a subdivision count
- `Quad` has a `flipped` property
These types have not been changed to utilize the new primitives yet.
---
## Changelog
- Deprecated all shapes in `bevy_render::mesh::shape`
- Changed all examples to use new primitives for meshing
## Migration Guide
Bevy has previously used rendering-specific types like `UVSphere` and
`Quad` for primitive mesh shapes. These have now been deprecated to use
the geometric primitives newly introduced in version 0.13.
Some examples:
```rust
let before = meshes.add(shape::Box::new(5.0, 0.15, 5.0));
let after = meshes.add(Cuboid::new(5.0, 0.15, 5.0));
let before = meshes.add(shape::Quad::default());
let after = meshes.add(Rectangle::default());
let before = meshes.add(shape::Plane::from_size(5.0));
// The surface normal can now also be specified when using `new`
let after = meshes.add(Plane3d::default().mesh().size(5.0, 5.0));
let before = meshes.add(
Mesh::try_from(shape::Icosphere {
radius: 0.5,
subdivisions: 5,
})
.unwrap(),
);
let after = meshes.add(Sphere::new(0.5).mesh().ico(5).unwrap());
```
> Follow up to #10588
> Closes#11749 (Supersedes #11756)
Enable Texture slicing for the following UI nodes:
- `ImageBundle`
- `ButtonBundle`
<img width="739" alt="Screenshot 2024-01-29 at 13 57 43"
src="https://github.com/bevyengine/bevy/assets/26703856/37675681-74eb-4689-ab42-024310cf3134">
I also added a collection of `fantazy-ui-borders` from
[Kenney's](www.kenney.nl) assets, with the appropriate license (CC).
If it's a problem I can use the same textures as the `sprite_slice`
example
# Work done
Added the `ImageScaleMode` component to the targetted bundles, most of
the logic is directly reused from `bevy_sprite`.
The only additional internal component is the UI specific
`ComputedSlices`, which does the same thing as its spritee equivalent
but adapted to UI code.
Again the slicing is not compatible with `TextureAtlas`, it's something
I need to tackle more deeply in the future
# Fixes
* [x] I noticed that `TextureSlicer::compute_slices` could infinitely
loop if the border was larger that the image half extents, now an error
is triggered and the texture will fallback to being stretched
* [x] I noticed that when using small textures with very small *tiling*
options we could generate hundred of thousands of slices. Now I set a
minimum size of 1 pixel per slice, which is already ridiculously small,
and a warning will be sent at runtime when slice count goes above 1000
* [x] Sprite slicing with `flip_x` or `flip_y` would give incorrect
results, correct flipping is now supported to both sprites and ui image
nodes thanks to @odecay observation
# GPU Alternative
I create a separate branch attempting to implementing 9 slicing and
tiling directly through the `ui.wgsl` fragment shader. It works but
requires sending more data to the GPU:
- slice border
- tiling factors
And more importantly, the actual quad *scale* which is hard to put in
the shader with the current code, so that would be for a later iteration
# Objective
- Fixes#11740
## Solution
- Turned `Mesh::set_indices` into `Mesh::insert_indices` and added
related methods for completeness.
---
## Changelog
- Replaced `Mesh::set_indices(indices: Option<Indices>)` with
`Mesh::insert_indices(indices: Indices)`
- Replaced `Mesh::with_indices(indices: Option<Indices>)` with
`Mesh::with_inserted_indices(indices: Indices)` and
`Mesh::with_removed_indices()` mirroring the API for inserting /
removing attributes.
- Updated the examples and internal uses of the APIs described above.
## Migration Guide
- Use `Mesh::insert_indices` or `Mesh::with_inserted_indices` instead of
`Mesh::set_indices` / `Mesh::with_indices`.
- If you have passed `None` to `Mesh::set_indices` or
`Mesh::with_indices` you should use `Mesh::remove_indices` or
`Mesh::with_removed_indices` instead.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Bevy could benefit from *irradiance volumes*, also known as *voxel
global illumination* or simply as light probes (though this term is not
preferred, as multiple techniques can be called light probes).
Irradiance volumes are a form of baked global illumination; they work by
sampling the light at the centers of each voxel within a cuboid. At
runtime, the voxels surrounding the fragment center are sampled and
interpolated to produce indirect diffuse illumination.
## Solution
This is divided into two sections. The first is copied and pasted from
the irradiance volume module documentation and describes the technique.
The second part consists of notes on the implementation.
### Overview
An *irradiance volume* is a cuboid voxel region consisting of
regularly-spaced precomputed samples of diffuse indirect light. They're
ideal if you have a dynamic object such as a character that can move
about
static non-moving geometry such as a level in a game, and you want that
dynamic object to be affected by the light bouncing off that static
geometry.
To use irradiance volumes, you need to precompute, or *bake*, the
indirect
light in your scene. Bevy doesn't currently come with a way to do this.
Fortunately, [Blender] provides a [baking tool] as part of the Eevee
renderer, and its irradiance volumes are compatible with those used by
Bevy.
The [`bevy-baked-gi`] project provides a tool, `export-blender-gi`, that
can
extract the baked irradiance volumes from the Blender `.blend` file and
package them up into a `.ktx2` texture for use by the engine. See the
documentation in the `bevy-baked-gi` project for more details as to this
workflow.
Like all light probes in Bevy, irradiance volumes are 1×1×1 cubes that
can
be arbitrarily scaled, rotated, and positioned in a scene with the
[`bevy_transform::components::Transform`] component. The 3D voxel grid
will
be stretched to fill the interior of the cube, and the illumination from
the
irradiance volume will apply to all fragments within that bounding
region.
Bevy's irradiance volumes are based on Valve's [*ambient cubes*] as used
in
*Half-Life 2* ([Mitchell 2006], slide 27). These encode a single color
of
light from the six 3D cardinal directions and blend the sides together
according to the surface normal.
The primary reason for choosing ambient cubes is to match Blender, so
that
its Eevee renderer can be used for baking. However, they also have some
advantages over the common second-order spherical harmonics approach:
ambient cubes don't suffer from ringing artifacts, they are smaller (6
colors for ambient cubes as opposed to 9 for spherical harmonics), and
evaluation is faster. A smaller basis allows for a denser grid of voxels
with the same storage requirements.
If you wish to use a tool other than `export-blender-gi` to produce the
irradiance volumes, you'll need to pack the irradiance volumes in the
following format. The irradiance volume of resolution *(Rx, Ry, Rz)* is
expected to be a 3D texture of dimensions *(Rx, 2Ry, 3Rz)*. The
unnormalized
texture coordinate *(s, t, p)* of the voxel at coordinate *(x, y, z)*
with
side *S* ∈ *{-X, +X, -Y, +Y, -Z, +Z}* is as follows:
```text
s = x
t = y + ⎰ 0 if S ∈ {-X, -Y, -Z}
⎱ Ry if S ∈ {+X, +Y, +Z}
⎧ 0 if S ∈ {-X, +X}
p = z + ⎨ Rz if S ∈ {-Y, +Y}
⎩ 2Rz if S ∈ {-Z, +Z}
```
Visually, in a left-handed coordinate system with Y up, viewed from the
right, the 3D texture looks like a stacked series of voxel grids, one
for
each cube side, in this order:
| **+X** | **+Y** | **+Z** |
| ------ | ------ | ------ |
| **-X** | **-Y** | **-Z** |
A terminology note: Other engines may refer to irradiance volumes as
*voxel
global illumination*, *VXGI*, or simply as *light probes*. Sometimes
*light
probe* refers to what Bevy calls a reflection probe. In Bevy, *light
probe*
is a generic term that encompasses all cuboid bounding regions that
capture
indirect illumination, whether based on voxels or not.
Note that, if binding arrays aren't supported (e.g. on WebGPU or WebGL
2),
then only the closest irradiance volume to the view will be taken into
account during rendering.
[*ambient cubes*]:
https://advances.realtimerendering.com/s2006/Mitchell-ShadingInValvesSourceEngine.pdf
[Mitchell 2006]:
https://advances.realtimerendering.com/s2006/Mitchell-ShadingInValvesSourceEngine.pdf
[Blender]: http://blender.org/
[baking tool]:
https://docs.blender.org/manual/en/latest/render/eevee/render_settings/indirect_lighting.html
[`bevy-baked-gi`]: https://github.com/pcwalton/bevy-baked-gi
### Implementation notes
This patch generalizes light probes so as to reuse as much code as
possible between irradiance volumes and the existing reflection probes.
This approach was chosen because both techniques share numerous
similarities:
1. Both irradiance volumes and reflection probes are cuboid bounding
regions.
2. Both are responsible for providing baked indirect light.
3. Both techniques involve presenting a variable number of textures to
the shader from which indirect light is sampled. (In the current
implementation, this uses binding arrays.)
4. Both irradiance volumes and reflection probes require gathering and
sorting probes by distance on CPU.
5. Both techniques require the GPU to search through a list of bounding
regions.
6. Both will eventually want to have falloff so that we can smoothly
blend as objects enter and exit the probes' influence ranges. (This is
not implemented yet to keep this patch relatively small and reviewable.)
To do this, we generalize most of the methods in the reflection probes
patch #11366 to be generic over a trait, `LightProbeComponent`. This
trait is implemented by both `EnvironmentMapLight` (for reflection
probes) and `IrradianceVolume` (for irradiance volumes). Using a trait
will allow us to add more types of light probes in the future. In
particular, I highly suspect we will want real-time reflection planes
for mirrors in the future, which can be easily slotted into this
framework.
## Changelog
> This section is optional. If this was a trivial fix, or has no
externally-visible impact, you can delete this section.
### Added
* A new `IrradianceVolume` asset type is available for baked voxelized
light probes. You can bake the global illumination using Blender or
another tool of your choice and use it in Bevy to apply indirect
illumination to dynamic objects.
# Objective
Split up from #11007, fixing most of the remaining work for #10569.
Implement `Meshable` for `Cuboid`, `Sphere`, `Cylinder`, `Capsule`,
`Torus`, and `Plane3d`. This covers all shapes that Bevy has mesh
structs for in `bevy_render::mesh::shapes`.
`Cone` and `ConicalFrustum` are new shapes, so I can add them in a
follow-up, or I could just add them here directly if that's preferrable.
## Solution
Implement `Meshable` for `Cuboid`, `Sphere`, `Cylinder`, `Capsule`,
`Torus`, and `Plane3d`.
The logic is mostly just a copy of the the existing `bevy_render`
shapes, but `Plane3d` has a configurable surface normal that affects the
orientation. Some property names have also been changed to be more
consistent.
The default values differ from the old shapes to make them a bit more
logical:
- Spheres now have a radius of 0.5 instead of 1.0. The default capsule
is equivalent to the default cylinder with the sphere's halves glued on.
- The inner and outer radius of the torus are now 0.5 and 1.0 instead of
0.5 and 1.5 (i.e. the new minor and major radii are 0.25 and 0.75). It's
double the width of the default cuboid, half of its height, and the
default sphere matches the size of the hole.
- `Cuboid` is 1x1x1 by default unlike the dreaded `Box` which is 2x1x1.
Before, with "old" shapes:
Now, with primitive meshing:
I only changed the `3d_shapes` example to use primitives for now. I can
change them all in this PR or a follow-up though, whichever way is
preferrable.
### Sphere API
Spheres have had separate `Icosphere` and `UVSphere` structs, but with
primitives we only have one `Sphere`.
We need to handle this with builders:
```rust
// Existing structs
let ico = Mesh::try_from(Icophere::default()).unwrap();
let uv = Mesh::from(UVSphere::default());
// Primitives
let ico = Sphere::default().mesh().ico(5).unwrap();
let uv = Sphere::default().mesh().uv(32, 18);
```
We could add methods on `Sphere` directly to skip calling `.mesh()`.
I also added a `SphereKind` enum that can be used with the `kind`
method:
```rust
let ico = Sphere::default()
.mesh()
.kind(SphereKind::Ico { subdivisions: 8 })
.build();
```
The default mesh for a `Sphere` is an icosphere with 5 subdivisions
(like the default `Icosphere`).
---
## Changelog
- Implement `Meshable` and `Default` for `Cuboid`, `Sphere`, `Cylinder`,
`Capsule`, `Torus`, and `Plane3d`
- Use primitives in `3d_shapes` example
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fixes #4188, make users could set application ID for bevy apps.
## Solution
- Add `name` field to `bevy:🪟:Window`. Specifying this field adds
different properties to the window: application ID on `Wayland`,
`WM_CLASS` on `X11`, or window class name on Windows. It has no effect
on other platforms.
---
## Changelog
### Added
- Add `name` to `bevy:🪟:Window`.
## Migration Guide
- Set the `bevy_window::Window`'s `name` field when needed:
```rust
App::new()
.add_plugins(DefaultPlugins.set(WindowPlugin {
primary_window: Some(Window {
title: "I am a window!".into(),
name: Some("SpaceGameCompany.SpaceShooter".into()),
..default()
}),
..default()
}))
.run();
```
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- (Partially) Fixes#9904
- Acts on #9910
## Solution
- Deprecated the relevant methods from `Query`, cascading changes as
required across Bevy.
---
## Changelog
- Deprecated `QueryState::get_component_unchecked_mut` method
- Deprecated `Query::get_component` method
- Deprecated `Query::get_component_mut` method
- Deprecated `Query::component` method
- Deprecated `Query::component_mut` method
- Deprecated `Query::get_component_unchecked_mut` method
## Migration Guide
### `QueryState::get_component_unchecked_mut`
Use `QueryState::get_unchecked_manual` and select for the exact
component based on the structure of the exact query as required.
### `Query::(get_)component(_unchecked)(_mut)`
Use `Query::get` and select for the exact component based on the
structure of the exact query as required.
- For mutable access (`_mut`), use `Query::get_mut`
- For unchecked access (`_unchecked`), use `Query::get_unchecked`
- For panic variants (non-`get_`), add `.unwrap()`
## Notes
- `QueryComponentError` can be removed once these deprecated methods are
also removed. Due to an interaction with `thiserror`'s derive macro, it
is not marked as deprecated.
# Objective
Currently the `missing_docs` lint is allowed-by-default and enabled at
crate level when their documentations is complete (see #3492).
This PR proposes to inverse this logic by making `missing_docs`
warn-by-default and mark crates with imcomplete docs allowed.
## Solution
Makes `missing_docs` warn at workspace level and allowed at crate level
when the docs is imcomplete.
# Objective
- Create an example for bounding volumes and intersection tests
## Solution
- Add an example with a few bounding volumes, created from primitives
- Allow the user to cycle trough the different intersection tests
# Objective
Add interactive system debugging capabilities to bevy, providing
step/break/continue style capabilities to running system schedules.
* Original implementation: #8063
- `ignore_stepping()` everywhere was too much complexity
* Schedule-config & Resource discussion: #8168
- Decided on selective adding of Schedules & Resource-based control
## Solution
Created `Stepping` Resource. This resource can be used to enable
stepping on a per-schedule basis. Systems within schedules can be
individually configured to:
* AlwaysRun: Ignore any stepping state and run every frame
* NeverRun: Never run while stepping is enabled
- this allows for disabling of systems while debugging
* Break: If we're running the full frame, stop before this system is run
Stepping provides two modes of execution that reflect traditional
debuggers:
* Step-based: Only execute one system at a time
* Continue/Break: Run all systems, but stop before running a system
marked as Break
### Demo
https://user-images.githubusercontent.com/857742/233630981-99f3bbda-9ca6-4cc4-a00f-171c4946dc47.mov
Breakout has been modified to use Stepping. The game runs normally for a
couple of seconds, then stepping is enabled and the game appears to
pause. A list of Schedules & Systems appears with a cursor at the first
System in the list. The demo then steps forward full frames using the
spacebar until the ball is about to hit a brick. Then we step system by
system as the ball impacts a brick, showing the cursor moving through
the individual systems. Finally the demo switches back to frame stepping
as the ball changes course.
### Limitations
Due to architectural constraints in bevy, there are some cases systems
stepping will not function as a user would expect.
#### Event-driven systems
Stepping does not support systems that are driven by `Event`s as events
are flushed after 1-2 frames. Although game systems are not running
while stepping, ignored systems are still running every frame, so events
will be flushed.
This presents to the user as stepping the event-driven system never
executes the system. It does execute, but the events have already been
flushed.
This can be resolved by changing event handling to use a buffer for
events, and only dropping an event once all readers have read it.
The work-around to allow these systems to properly execute during
stepping is to have them ignore stepping:
`app.add_systems(event_driven_system.ignore_stepping())`. This was done
in the breakout example to ensure sound played even while stepping.
#### Conditional Systems
When a system is stepped, it is given an opportunity to run. If the
conditions of the system say it should not run, it will not.
Similar to Event-driven systems, if a system is conditional, and that
condition is only true for a very small time window, then stepping the
system may not execute the system. This includes depending on any sort
of external clock.
This exhibits to the user as the system not always running when it is
stepped.
A solution to this limitation is to ensure any conditions are consistent
while stepping is enabled. For example, all systems that modify any
state the condition uses should also enable stepping.
#### State-transition Systems
Stepping is configured on the per-`Schedule` level, requiring the user
to have a `ScheduleLabel`.
To support state-transition systems, bevy generates needed schedules
dynamically. Currently it’s very difficult (if not impossible, I haven’t
verified) for the user to get the labels for these schedules.
Without ready access to the dynamically generated schedules, and a
resolution for the `Event` lifetime, **stepping of the state-transition
systems is not supported**
---
## Changelog
- `Schedule::run()` updated to consult `Stepping` Resource to determine
which Systems to run each frame
- Added `Schedule.label` as a `BoxedSystemLabel`, along with supporting
`Schedule::set_label()` and `Schedule::label()` methods
- `Stepping` needed to know which `Schedule` was running, and prior to
this PR, `Schedule` didn't track its own label
- Would have preferred to add `Schedule::with_label()` and remove
`Schedule::new()`, but this PR touches enough already
- Added calls to `Schedule.set_label()` to `App` and `World` as needed
- Added `Stepping` resource
- Added `Stepping::begin_frame()` system to `MainSchedulePlugin`
- Run before `Main::run_main()`
- Notifies any `Stepping` Resource a new render frame is starting
## Migration Guide
- Add a call to `Schedule::set_label()` for any custom `Schedule`
- This is only required if the `Schedule` will be stepped
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
The PR is in a reviewable state now in the sense that the basic
implementations are there. There are still some ToDos that I'm aware of:
- [x] docs for all the new structs and traits
- [x] implement `Default` and derive other useful traits for the new
structs
- [x] Take a look at the notes again (Do this after a first round of
reviews)
- [x] Take care of the repetition in the circle drawing functions
---
# Objective
- TLDR: This PR enables us to quickly draw all the newly added
primitives from `bevy_math` in immediate mode with gizmos
- Addresses #10571
## Solution
- This implements the first design idea I had that covered everything
that was mentioned in the Issue
https://github.com/bevyengine/bevy/issues/10571#issuecomment-1863646197
---
## Caveats
- I added the `Primitive(2/3)d` impls for `Direction(2/3)d` to make them
work with the current solution. We could impose less strict requirements
for the gizmoable objects and remove the impls afterwards if the
community doesn't like the current approach.
---
## Changelog
- implement capabilities to draw ellipses on the gizmo in general (this
was required to have some code which is able to draw the ellipse
primitive)
- refactored circle drawing code to use the more general ellipse drawing
code to keep code duplication low
- implement `Primitive2d` for `Direction2d` and impl `Primitive3d` for
`Direction3d`
- implement trait to draw primitives with specialized details with
gizmos
- `GizmoPrimitive2d` for all the 2D primitives
- `GizmoPrimitive3d` for all the 3D primitives
- (question while writing this: Does it actually matter if we split this
in 2D and 3D? I guess it could be useful in the future if we do
something based on the main rendering mode even though atm it's kinda
useless)
---
---------
Co-authored-by: nothendev <borodinov.ilya@gmail.com>
# Objective
Drawing a `Gizmos::circle` whose normal is derived from a Transform's
local axes now requires converting a Vec3 to a Direction3d and
unwrapping the result, and I think we shold move the conversion into
Bevy.
## Solution
We can make
`Transform::{left,right,up,down,forward,back,local_x,local_y,local_z}`
return a Direction3d, because they know that their results will be of
finite non-zero length (roughly 1.0).
---
## Changelog
`Transform::up()` and similar functions now return `Direction3d` instead
of `Vec3`.
## Migration Guide
Callers of `Transform::up()` and similar functions may have to
dereference the returned `Direction3d` to get to the inner `Vec3`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
- `AssetTransformer` provides an input asset, and output an asset, but
provides no access to the `LabeledAsset`'s created by the `AssetLoader`.
Labeled sub assets are an extremely important piece of many assets, Gltf
in particular, and without them the amount of transformation on an asset
is limited. In order for `AssetTransformer`'s to be useful, they need to
have access to these sub assets.
- LabeledAsset's loaded by `AssetLoader`s are provided to `AssetSaver`s
in the `LoadAndSave` process, but the `LoadTransformAndSave` process
drops these values in the transform stage, and so `AssetSaver` is given
none.
- Fixes#11606
Ideally the AssetTransformer should not ignore labeled sub assets, and
they should be kept at least for the AssetSaver
## Solution
- I created a new struct similar to `SavedAsset` named
`TransformedAsset` which holds the input asset, and the HashMap of
`LabeledAsset`s. The transform function now takes as input a
`TransformedAsset`, and returns a `TransformedAsset::<AssetOutput>`.
This gives the transform function access to the labeled sub assets
created by the `AssetLoader`.
- I also created `TransformedSubAsset` which holds mutable references to
a sub asset and that sub assets HashMap of `LabeledAsset`s. This allows
you to travers the Tree of `LabeledAsset`s by reference relatively
easily.
- The `LoadTransformAndSave` processor was then reworked to use the new
structs, stopping the `LabeledAsset`s from being dropped.
---
## Changelog
- Created TransformedAsset struct and TransformedSubAsset struct.
- Changed `get_untyped_handle` to return a `UntypedHandle` directly
rather than a reference and added `get_handle` as a typed variant in
SavedAsset and TransformedAsset
- Added `SavedAsset::from_transformed` as a constructor from a
`TransformedAsset`
- Switched LoadTransformAndSave process code to work with new
`TransformedAsset` type
- Added a `ProcessError` for `AssetTransformer` in process.rs
- Switched `AssetTransformer::transform` to use `TransformedAsset` as
input and output.
- Switched `AssetTransformer` to use a `BoxedFuture` like `AssetLoader`
and `AssetSaver` to allow for async transformation code.
- Updated AssetTransformer example to use new structure.
# Objective
- When running any of the stress tests, the refresh rate is currently
capped to 60hz because of the `ReactiveLowPower` default used when the
window is not in focus. Since stress tests should run as fast as
possible (and as such vsync is disabled for all of them), it makes sense
to always run them in `Continuous` mode. This is especially useful to
avoid capturing non-representative frame times when recording a Tracy
frame.
## Solution
- Always use the `Continuous` update mode in stress tests.
# Objective
- Finish PR #10322
## Solution
- Rebase changes in PR #10322 and format the changes.
Co-authored-by: Mauer-Oats <maueroats@users.noreply.github.com>
# Objective
- Addresses **Support processing and loading files without extensions**
from #9714
- Addresses **More runtime loading configuration** from #9714
- Fixes#367
- Fixes#10703
## Solution
`AssetServer::load::<A>` and `AssetServer::load_with_settings::<A>` can
now use the `Asset` type parameter `A` to select a registered
`AssetLoader` without inspecting the provided `AssetPath`. This change
cascades onto `LoadContext::load` and `LoadContext::load_with_settings`.
This allows the loading of assets which have incorrect or ambiguous file
extensions.
```rust
// Allow the type to be inferred by context
let handle = asset_server.load("data/asset_no_extension");
// Hint the type through the handle
let handle: Handle<CustomAsset> = asset_server.load("data/asset_no_extension");
// Explicit through turbofish
let handle = asset_server.load::<CustomAsset>("data/asset_no_extension");
```
Since a single `AssetPath` no longer maps 1:1 with an `Asset`, I've also
modified how assets are loaded to permit multiple asset types to be
loaded from a single path. This allows for two different `AssetLoaders`
(which return different types of assets) to both load a single path (if
requested).
```rust
// Uses GltfLoader
let model = asset_server.load::<Gltf>("cube.gltf");
// Hypothetical Blob loader for data transmission (for example)
let blob = asset_server.load::<Blob>("cube.gltf");
```
As these changes are reflected in the `LoadContext` as well as the
`AssetServer`, custom `AssetLoaders` can also take advantage of this
behaviour to create more complex assets.
---
## Change Log
- Updated `custom_asset` example to demonstrate extension-less assets.
- Added `AssetServer::get_handles_untyped` and Added
`AssetServer::get_path_ids`
## Notes
As a part of that refactor, I chose to store `AssetLoader`s (within
`AssetLoaders`) using a `HashMap<TypeId, ...>` instead of a `Vec<...>`.
My reasoning for this was I needed to add a relationship between `Asset`
`TypeId`s and the `AssetLoader`, so instead of having a `Vec` and a
`HashMap`, I combined the two, removing the `usize` index from the
adjacent maps.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
The whole `Cow<'static, str>` naming for nodes and subgraphs in
`RenderGraph` is a mess.
## Solution
Replaces hardcoded and potentially overlapping strings for nodes and
subgraphs inside `RenderGraph` with bevy's labelsystem.
---
## Changelog
* Two new labels: `RenderLabel` and `RenderSubGraph`.
* Replaced all uses for hardcoded strings with those labels
* Moved `Taa` label from its own mod to all the other `Labels3d`
* `add_render_graph_edges` now needs a tuple of labels
* Moved `ScreenSpaceAmbientOcclusion` label from its own mod with the
`ShadowPass` label to `LabelsPbr`
* Removed `NodeId`
* Renamed `Edges.id()` to `Edges.label()`
* Removed `NodeLabel`
* Changed examples according to the new label system
* Introduced new `RenderLabel`s: `Labels2d`, `Labels3d`, `LabelsPbr`,
`LabelsUi`
* Introduced new `RenderSubGraph`s: `SubGraph2d`, `SubGraph3d`,
`SubGraphUi`
* Removed `Reflect` and `Default` derive from `CameraRenderGraph`
component struct
* Improved some error messages
## Migration Guide
For Nodes and SubGraphs, instead of using hardcoded strings, you now
pass labels, which can be derived with structs and enums.
```rs
// old
#[derive(Default)]
struct MyRenderNode;
impl MyRenderNode {
pub const NAME: &'static str = "my_render_node"
}
render_app
.add_render_graph_node::<ViewNodeRunner<MyRenderNode>>(
core_3d::graph::NAME,
MyRenderNode::NAME,
)
.add_render_graph_edges(
core_3d::graph::NAME,
&[
core_3d::graph::node::TONEMAPPING,
MyRenderNode::NAME,
core_3d::graph::node::END_MAIN_PASS_POST_PROCESSING,
],
);
// new
use bevy::core_pipeline::core_3d::graph::{Labels3d, SubGraph3d};
#[derive(Debug, Hash, PartialEq, Eq, Clone, RenderLabel)]
pub struct MyRenderLabel;
#[derive(Default)]
struct MyRenderNode;
render_app
.add_render_graph_node::<ViewNodeRunner<MyRenderNode>>(
SubGraph3d,
MyRenderLabel,
)
.add_render_graph_edges(
SubGraph3d,
(
Labels3d::Tonemapping,
MyRenderLabel,
Labels3d::EndMainPassPostProcessing,
),
);
```
### SubGraphs
#### in `bevy_core_pipeline::core_2d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `NAME` | `SubGraph2d` |
#### in `bevy_core_pipeline::core_3d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `NAME` | `SubGraph3d` |
#### in `bevy_ui::render`
| old string-based path | new label |
|-----------------------|-----------|
| `draw_ui_graph::NAME` | `graph::SubGraphUi` |
### Nodes
#### in `bevy_core_pipeline::core_2d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `node::MSAA_WRITEBACK` | `Labels2d::MsaaWriteback` |
| `node::MAIN_PASS` | `Labels2d::MainPass` |
| `node::BLOOM` | `Labels2d::Bloom` |
| `node::TONEMAPPING` | `Labels2d::Tonemapping` |
| `node::FXAA` | `Labels2d::Fxaa` |
| `node::UPSCALING` | `Labels2d::Upscaling` |
| `node::CONTRAST_ADAPTIVE_SHARPENING` |
`Labels2d::ConstrastAdaptiveSharpening` |
| `node::END_MAIN_PASS_POST_PROCESSING` |
`Labels2d::EndMainPassPostProcessing` |
#### in `bevy_core_pipeline::core_3d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `node::MSAA_WRITEBACK` | `Labels3d::MsaaWriteback` |
| `node::PREPASS` | `Labels3d::Prepass` |
| `node::DEFERRED_PREPASS` | `Labels3d::DeferredPrepass` |
| `node::COPY_DEFERRED_LIGHTING_ID` | `Labels3d::CopyDeferredLightingId`
|
| `node::END_PREPASSES` | `Labels3d::EndPrepasses` |
| `node::START_MAIN_PASS` | `Labels3d::StartMainPass` |
| `node::MAIN_OPAQUE_PASS` | `Labels3d::MainOpaquePass` |
| `node::MAIN_TRANSMISSIVE_PASS` | `Labels3d::MainTransmissivePass` |
| `node::MAIN_TRANSPARENT_PASS` | `Labels3d::MainTransparentPass` |
| `node::END_MAIN_PASS` | `Labels3d::EndMainPass` |
| `node::BLOOM` | `Labels3d::Bloom` |
| `node::TONEMAPPING` | `Labels3d::Tonemapping` |
| `node::FXAA` | `Labels3d::Fxaa` |
| `node::UPSCALING` | `Labels3d::Upscaling` |
| `node::CONTRAST_ADAPTIVE_SHARPENING` |
`Labels3d::ContrastAdaptiveSharpening` |
| `node::END_MAIN_PASS_POST_PROCESSING` |
`Labels3d::EndMainPassPostProcessing` |
#### in `bevy_core_pipeline`
| old string-based path | new label |
|-----------------------|-----------|
| `taa::draw_3d_graph::node::TAA` | `Labels3d::Taa` |
#### in `bevy_pbr`
| old string-based path | new label |
|-----------------------|-----------|
| `draw_3d_graph::node::SHADOW_PASS` | `LabelsPbr::ShadowPass` |
| `ssao::draw_3d_graph::node::SCREEN_SPACE_AMBIENT_OCCLUSION` |
`LabelsPbr::ScreenSpaceAmbientOcclusion` |
| `deferred::DEFFERED_LIGHTING_PASS` | `LabelsPbr::DeferredLightingPass`
|
#### in `bevy_render`
| old string-based path | new label |
|-----------------------|-----------|
| `main_graph::node::CAMERA_DRIVER` | `graph::CameraDriverLabel` |
#### in `bevy_ui::render`
| old string-based path | new label |
|-----------------------|-----------|
| `draw_ui_graph::node::UI_PASS` | `graph::LabelsUi::UiPass` |
---
## Future work
* Make `NodeSlot`s also use types. Ideally, we have an enum with unit
variants where every variant resembles one slot. Then to make sure you
are using the right slot enum and make rust-analyzer play nicely with
it, we should make an associated type in the `Node` trait. With today's
system, we can introduce 3rd party slots to a node, and i wasnt sure if
this was used, so I didn't do this in this PR.
## Unresolved Questions
When looking at the `post_processing` example, we have a struct for the
label and a struct for the node, this seems like boilerplate and on
discord, @IceSentry (sowy for the ping)
[asked](https://discord.com/channels/691052431525675048/743663924229963868/1175197016947699742)
if a node could automatically introduce a label (or i completely
misunderstood that). The problem with that is, that nodes like
`EmptyNode` exist multiple times *inside the same* (sub)graph, so there
we need extern labels to distinguish between those. Hopefully we can
find a way to reduce boilerplate and still have everything unique. For
EmptyNode, we could maybe make a macro which implements an "empty node"
for a type, but for nodes which contain code and need to be present
multiple times, this could get nasty...
# Objective
- Example `send_and_receive_events` added in #11574 panics
```
thread 'Compute Task Pool (3)' panicked at bevy/crates/bevy_ecs/src/system/system_param.rs:570:17:
Resource requested by send_and_receive_events::read_and_write_different_event_types does not exist: bevy_ecs::event::Events<send_and_receive_events::A>
Encountered a panic in system `send_and_receive_events::read_and_write_different_event_types`!
Encountered a panic in system `bevy_app::main_schedule::Main::run_main`!
```
## Solution
- Register the events used in the system
- Don't use logger as it's not setup with `MinimalPlugins`, just print
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Kanabenki <lucien.menassol@gmail.com>
# Objective
Right now, all assets in the main world get extracted and prepared in
the render world (if the asset's using the RenderAssetPlugin). This is
unfortunate for two cases:
1. **TextureAtlas** / **FontAtlas**: This one's huge. The individual
`Image` assets that make up the atlas are cloned and prepared
individually when there's no reason for them to be. The atlas textures
are built on the CPU in the main world. *There can be hundreds of images
that get prepared for rendering only not to be used.*
2. If one loads an Image and needs to transform it in a system before
rendering it, kind of like the [decompression
example](https://github.com/bevyengine/bevy/blob/main/examples/asset/asset_decompression.rs#L120),
there's a price paid for extracting & preparing the asset that's not
intended to be rendered yet.
------
* References #10520
* References #1782
## Solution
This changes the `RenderAssetPersistencePolicy` enum to bitflags. I felt
that the objective with the parameter is so similar in nature to wgpu's
[`TextureUsages`](https://docs.rs/wgpu/latest/wgpu/struct.TextureUsages.html)
and
[`BufferUsages`](https://docs.rs/wgpu/latest/wgpu/struct.BufferUsages.html),
that it may as well be just like that.
```rust
// This asset only needs to be in the main world. Don't extract and prepare it.
RenderAssetUsages::MAIN_WORLD
// Keep this asset in the main world and
RenderAssetUsages::MAIN_WORLD | RenderAssetUsages::RENDER_WORLD
// This asset is only needed in the render world. Remove it from the asset server once extracted.
RenderAssetUsages::RENDER_WORLD
```
### Alternate Solution
I considered introducing a third field to `RenderAssetPersistencePolicy`
enum:
```rust
enum RenderAssetPersistencePolicy {
/// Keep the asset in the main world after extracting to the render world.
Keep,
/// Remove the asset from the main world after extracting to the render world.
Unload,
/// This doesn't need to be in the render world at all.
NoExtract, // <-----
}
```
Functional, but this seemed like shoehorning. Another option is renaming
the enum to something like:
```rust
enum RenderAssetExtractionPolicy {
/// Extract the asset and keep it in the main world.
Extract,
/// Remove the asset from the main world after extracting to the render world.
ExtractAndUnload,
/// This doesn't need to be in the render world at all.
NoExtract,
}
```
I think this last one could be a good option if the bitflags are too
clunky.
## Migration Guide
* `RenderAssetPersistencePolicy::Keep` → `RenderAssetUsage::MAIN_WORLD |
RenderAssetUsage::RENDER_WORLD` (or `RenderAssetUsage::default()`)
* `RenderAssetPersistencePolicy::Unload` →
`RenderAssetUsage::RENDER_WORLD`
* For types implementing the `RenderAsset` trait, change `fn
persistence_policy(&self) -> RenderAssetPersistencePolicy` to `fn
asset_usage(&self) -> RenderAssetUsages`.
* Change any references to `cpu_persistent_access`
(`RenderAssetPersistencePolicy`) to `asset_usage` (`RenderAssetUsage`).
This applies to `Image`, `Mesh`, and a few other types.
# Objective
Fixes#11479
## Solution
- Remove `collide_aabb.rs`
- Re-implement the example-specific collision code in the example,
taking advantage of the new `IntersectsVolume` trait.
## Changelog
- Removed `sprite::collide_aabb::collide` and
`sprite::collide_aabb::Collision`.
## Migration Guide
`sprite::collide_aabb::collide` and `sprite::collide_aabb::Collision`
were removed.
```rust
// Before
let collision = bevy::sprite::collide_aabb::collide(a_pos, a_size, b_pos, b_size);
if collision.is_some() {
// ...
}
// After
let collision = Aabb2d::new(a_pos.truncate(), a_size / 2.)
.intersects(&Aabb2d::new(b_pos.truncate(), b_size / 2.));
if collision {
// ...
}
```
If you were making use `collide_aabb::Collision`, see the new
`collide_with_side` function in the [`breakout`
example](https://bevyengine.org/examples/Games/breakout/).
## Discussion
As discussed in the linked issue, maybe we want to wait on `bevy_sprite`
generally making use of `Aabb2b` so users don't need to construct it
manually. But since they **do** need to construct the bounding circle
for the ball manually, this doesn't seem like a big deal to me.
---------
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
# Objective
The first part of #10569, split up from #11007.
The goal is to implement meshing support for Bevy's new geometric
primitives, starting with 2D primitives. 3D meshing will be added in a
follow-up, and we can consider removing the old mesh shapes completely.
## Solution
Add a `Meshable` trait that primitives need to implement to support
meshing, as suggested by the
[RFC](https://github.com/bevyengine/rfcs/blob/main/rfcs/12-primitive-shapes.md#meshing).
```rust
/// A trait for shapes that can be turned into a [`Mesh`].
pub trait Meshable {
/// The output of [`Self::mesh`]. This can either be a [`Mesh`]
/// or a builder used for creating a [`Mesh`].
type Output;
/// Creates a [`Mesh`] for a shape.
fn mesh(&self) -> Self::Output;
}
```
This PR implements it for the following primitives:
- `Circle`
- `Ellipse`
- `Rectangle`
- `RegularPolygon`
- `Triangle2d`
The `mesh` method typically returns a builder-like struct such as
`CircleMeshBuilder`. This is needed to support shape-specific
configuration for things like mesh resolution or UV configuration:
```rust
meshes.add(Circle { radius: 0.5 }.mesh().resolution(64));
```
Note that if no configuration is needed, you can even skip calling
`mesh` because `From<MyPrimitive>` is implemented for `Mesh`:
```rust
meshes.add(Circle { radius: 0.5 });
```
I also updated the `2d_shapes` example to use primitives, and tweaked
the colors to have better contrast against the dark background.
Before:
After:
Here you can see the UVs and different facing directions: (taken from
#11007, so excuse the 3D primitives at the bottom left)
---
## Changelog
- Added `bevy_render::mesh::primitives` module
- Added `Meshable` trait and implemented it for:
- `Circle`
- `Ellipse`
- `Rectangle`
- `RegularPolygon`
- `Triangle2d`
- Implemented `Default` and `Copy` for several 2D primitives
- Updated `2d_shapes` example to use primitives
- Tweaked colors in `2d_shapes` example to have better contrast against
the (new-ish) dark background
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Sending and receiving events of the same type in the same system is a
reasonably common need, generally due to event filtering.
- However, actually doing so is non-trivial, as the borrow checker
simultaneous hates mutable and immutable access.
## Solution
- Demonstrate two sensible patterns for doing so.
- Update the `ManualEventReader` docs to be more clear and link to this
example.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
Co-authored-by: ickk <git@ickk.io>
# Objective
- example `animated_material` is more complex that needed to show how to
animate materials
- it makes CI crash because it uses too much memory
## Solution
- Simplify the example
# Objective
- Implement an arc3d API for gizmos
- Solves #11536
## Solution
### `arc_3d`
- The current `arc3d` method on gizmos only takes an angle
- It draws an "standard arc" by default, this is an arc starting at
`Vec3::X`, in the XZ plane, in counter clockwise direction with a normal
that is facing up
- The "standard arc" can be customized with the usual gizmo builder
pattern. This way you'll be able to draw arbitrary arcs
### `short/long_arc_3d_between`
- Given `center`, `from`, `to` draws an arc between `from` and `to`
---
## Changelog
> This section is optional. If this was a trivial fix, or has no
externally-visible impact, you can delete this section.
- Added: `Gizmos::arc3d(&mut self, angle)` method
- Added: `Gizmos::long_arc_3d_between(&mut self, center, from, to)`
method
- Added: `Gizmos::short_arc_3d_between(&mut self, center, from, to)`
method
---
This PR factors out an orthogonal part of another PR as mentioned in
[this
comment](https://github.com/bevyengine/bevy/pull/11072#issuecomment-1883859573)
