# Objective
- Remove dead code after #7784
# Changelog
- Removed `SetShadowViewBindGroup`, `queue_shadow_view_bind_group()`, and `LightMeta::shadow_view_bind_group` in favor of reusing the prepass view bind group.
# Migration Guide
- Removed `SetShadowViewBindGroup`, `queue_shadow_view_bind_group()`, and `LightMeta::shadow_view_bind_group` in favor of reusing the prepass view bind group.
# Objective
The trait `IntoSystemConfig<>` requires each implementer to repeat every single member method, even though they can all be implemented by just deferring to `SystemConfig`.
## Solution
Add default implementations to most member methods.
# Objective
Base sets, added in #7466 are a special type of system set. Systems can only be added to base sets via `in_base_set`, while non-base sets can only be added via `in_set`. Unfortunately this is currently guarded by a runtime panic, which presents an unfortunate toe-stub when the wrong method is used. The delayed response between writing code and encountering the error (possibly hours) makes the distinction between base sets and other sets much more difficult to learn.
## Solution
Add the marker traits `BaseSystemSet` and `FreeSystemSet`. `in_base_set` and `in_set` now respectively accept these traits, which moves the runtime panic to a compile time error.
---
## Changelog
+ Added the marker trait `BaseSystemSet`, which is distinguished from a `FreeSystemSet`. These are both subtraits of `SystemSet`.
## Migration Guide
None if merged with 0.10
# Objective
Fixes#7864
## Solution
Add the run conditions described in the issue. Also needed to add `bevy` as a dev dependency to `bevy_time` so the doctests can run.
---
## Changelog
- Add `on_timer` and `on_fixed_timer` run conditions
…or's ticker for one thread.
# Objective
- Fix debug_asset_server hang.
## Solution
- Reuse the thread_local executor for MainThreadExecutor resource, so there will be only one ThreadExecutor for main thread.
- If ThreadTickers from same executor, they are conflict with each other. Then only tick one.
# Objective
- Fixes#4372.
## Solution
- Use the prepass shaders for the shadow passes.
- Move `DEPTH_CLAMP_ORTHO` from `ShadowPipelineKey` to `MeshPipelineKey` and the associated clamp operation from `depth.wgsl` to `prepass.wgsl`.
- Remove `depth.wgsl` .
- Replace `ShadowPipeline` with `ShadowSamplers`.
Instead of running the custom `ShadowPipeline` we run the `PrepassPipeline` with the `DEPTH_PREPASS` flag and additionally the `DEPTH_CLAMP_ORTHO` flag for directional lights as well as the `ALPHA_MASK` flag for materials that use `AlphaMode::Mask(_)`.
# Objective
Fixes#7797
## Solution
This **seems** like a simple fix, but I'm not 100% confident and I may have messed up the math in some way. In particular, I'm not sure what I should be using for an FOV value.
However, this seems to be producing similar results to 0.9.
Here's the `orthographic` example with a default directional light.
edit: better screen grab below.
# Objective
Fixes#6780
## Solution
- record the asset path of each watched file
- call `AssetIo::watch_for_changes` in `LoadContext::read_asset_bytes`
---
## Changelog
### Fixed
- fixed hot reloading for `LoadContext::read_asset_bytes`
### Changed
- `AssetIo::watch_path_for_changes` allows watched path and path to reload to differ
## Migration Guide
- for custom `AssetIo`s, differentiate paths to watch and asset paths to reload as a consequence
Co-authored-by: Vincent Junge <specificprotagonist@posteo.org>
# Objective
- Use the prepass textures in webgl
## Solution
- Bind the prepass textures even when using webgl, but only if msaa is disabled
- Also did some refactors to centralize how textures are bound, similar to the EnvironmentMapLight PR
- ~~Also did some refactors of the example to make it work in webgl~~
- ~~To make the example work in webgl, I needed to use a sampler for the depth texture, the resulting code looks a bit weird, but it's simple enough and I think it's worth it to show how it works when using webgl~~
# Objective
UIs created for Bevy cannot currently be made accessible. This PR aims to address that.
## Solution
Integrate AccessKit as a dependency, adding accessibility support to existing bevy_ui widgets.
## Changelog
### Added
* Integrate with and expose [AccessKit](https://accesskit.dev) for platform accessibility.
* Add `Label` for marking text specifically as a label for UI controls.
# Objective
Alternative to #7490. I wrote all of the code in this PR, but I have added @robtfm as co-author on commits that build on ideas from #7490. I would not have been able to solve these problems on my own without much more time investment and I'm largely just rephrasing the ideas from that PR.
Fixes#7435Fixes#7361Fixes#5721
## Solution
This implements the solution I [outlined here](https://github.com/bevyengine/bevy/pull/7490#issuecomment-1426580633).
* Adds "msaa writeback" as an explicit "msaa camera feature" and default to msaa_writeback: true for each camera. If this is true, a camera has MSAA enabled, and it isn't the first camera for the target, add a writeback before the main pass for that camera.
* Adds a CameraOutputMode, which can be used to configure if (and how) the results of a camera's rendering will be written to the final RenderTarget output texture (via the upscaling node). The `blend_state` and `color_attachment_load_op` are now configurable, giving much more control over how a camera will write to the output texture.
* Made cameras with the same target share the same main_texture tracker by using `Arc<AtomicUsize>`, which ensures continuity across cameras. This was previously broken / could produce weird results in some cases. `ViewTarget::main_texture()` is now correct in every context.
* Added a new generic / specializable BlitPipeline, which the new MsaaWritebackNode uses internally. The UpscalingPipelineNode now uses BlitPipeline instead of its own pipeline. We might ultimately need to fork this back out if we choose to add more configurability to the upscaling, but for now this will save on binary size by not embedding the same shader twice.
* Moved the "camera sorting" logic from the camera driver node to its own system. The results are now stored in the `SortedCameras` resource, which can be used anywhere in the renderer. MSAA writeback makes use of this.
---
## Changelog
- Added `Camera::msaa_writeback` which can enable and disable msaa writeback.
- Added specializable `BlitPipeline` and ported the upscaling node to use this.
- Added SortedCameras, exposing information that was previously internal to the camera driver node.
- Made cameras with the same target share the same main_texture tracker, which ensures continuity across cameras.
# Objective
The `ScheduleBuildError` type has a `Display` implementation which beautifully formats the error. However, schedule build errors are currently reported using `unwrap()`, which uses the `Debug` implementation and makes the error message look unfished.
## Solution
Use `unwrap_or_else` so we can customize the formatting of the error message.
# Objective
Several `Query` methods unnecessarily place the call to `Query::update_archetypes` inside of unsafe blocks.
## Solution
Move the method calls out of the unsafe blocks.
# Objective
Text2d entity's text needs to be recomputed when their bounds are changed, but it isn't.
# Solution
Change `update_text2d_layout` to query for `Ref<Text2dBounds>` and recompute the text if the bounds have changed.
# Objective
There is a panic that occurs when creating a run condition that accesses `NonSend` resources, but it refers to them as 'thread-local' resources instead.
## Solution
Correct the terminology.
# Objective
This is a follow-up to #7745. An unbounded `async_channel` occasionally allocates whenever it exceeds the capacity of the current buffer in it's internal linked list. This is avoidable.
This also used to be a bounded channel before stageless, which was introduced in #4919.
## Solution
Use a bounded channel to avoid allocations on system completion.
This shouldn't conflict with #7745, as it's impossible for the scheduler to exceed the channel capacity, even if somehow every system completed at the same time.
# Objective
Implement `Reflect` for `std::collections::HashMap<K, V, S>` as well as `hashbrown::HashMap<K, V, S>` rather than just for `hashbrown::HashMap<K, V, RandomState>`. Fixes#7739.
## Solution
Rather than implementing on `HashMap<K, V>` I instead implemented most of the related traits on `HashMap<K, V, S> where S: BuildHasher + Send + Sync + 'static` and then `FromReflect` also needs the extra bound `S: Default` because it needs to use `with_capacity_and_hasher` so needs to be able to generate a default hasher.
As the API of `hashbrown::HashMap` is identical to `collections::HashMap` making them both work just required creating an `impl_reflect_for_hashmap` macro like the `impl_reflect_for_veclike` above and then applying this to both HashMaps.
---
## Changelog
`std::collections::HashMap` can now be reflected. Also more `State` generics than just `RandomState` can now be reflected for both `hashbrown::HashMap` and `collections::HashMap`
# Objective
Fix#7544. Update docs for `Window::transparent` regarding Windows 11 platform support. Following the update to winit 0.28, this has been fixed.
## Solution
Remove the mention in the docs.
`EntityMut::move_entity_from_remove` had two soundness bugs:
- When removing the entity from the archetype, the swapped entity had its table row updated to the same as the removed entity's
- When removing the entity from the table, the swapped entity did not have its table row updated
`BundleInsert::insert` had two/three soundness bugs
- When moving an entity to a new archetype from an `insert`, the swapped entity had its table row set to a different entities
- When moving an entity to a new table from an `insert`, the swapped entity did not have its table row updated
See added tests for examples that trigger those bugs
`EntityMut::despawn` had two soundness bugs
- When despawning an entity, the swapped entity had its table row set to a different entities even if the table didnt change
- When despawning an entity, the swapped entity did not have its table row updated
# Objective
- A more intuitive distinction between the two. `remove_intersection` is verbose and unclear.
- `EntityMut::remove` and `Commands::remove` should match.
## Solution
- What the title says.
---
## Migration Guide
Before
```rust
fn clear_children(parent: Entity, world: &mut World) {
if let Some(children) = world.entity_mut(parent).remove::<Children>() {
for &child in &children.0 {
world.entity_mut(child).remove_intersection::<Parent>();
}
}
}
```
After
```rust
fn clear_children(parent: Entity, world: &mut World) {
if let Some(children) = world.entity_mut(parent).take::<Children>() {
for &child in &children.0 {
world.entity_mut(child).remove::<Parent>();
}
}
}
```
# Objective
Common run conditions can be very useful for quick and ergonomic changes to when a system runs.
Specifically what I'd like to be able to do is
```rust
use bevy::prelude::*;
use bevy::input::common_conditions::input_toggle_active;
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.add_plugin(
bevy_inspector_egui::quick::WorldInspectorPlugin::default()
.run_if(input_toggle_active(true, KeyCode::Escape)
)
.run();
}
```
## Solution
- add `bevy_input::common_conditions` module with `input_toggle_active`, `input_pressed`, `input_just_pressed`, `input_just_released`
## Changelog
- added common run conditions for `bevy_input`
- you can now use `.add_system(jump.run_if(input_just_pressed(KeyCode::Space)))`
# Objective
There were a couple primitive types missing from the default `TypeRegistry` constructor.
## Solution
Added the missing registrations for `char` and `String`.
# Objective
A couple of places in `bevy_app` use a scoped block that doesn't do anything. I imagine these are a relic from when `Mut<T>` implemented `Drop` in the early days of bevy.
## Solution
Remove the scopes.
# Objective
Support the following syntax for adding systems:
```rust
App::new()
.add_system(setup.on_startup())
.add_systems((
show_menu.in_schedule(OnEnter(GameState::Paused)),
menu_ssytem.in_set(OnUpdate(GameState::Paused)),
hide_menu.in_schedule(OnExit(GameState::Paused)),
))
```
## Solution
Add the traits `IntoSystemAppConfig{s}`, which provide the extension methods necessary for configuring which schedule a system belongs to. These extension methods return `IntoSystemAppConfig{s}`, which `App::add_system{s}` uses to choose which schedule to add systems to.
---
## Changelog
+ Added the extension methods `in_schedule(label)` and `on_startup()` for configuring the schedule a system belongs to.
## Future Work
* Replace all uses of `add_startup_system` in the engine.
* Deprecate this method
Alternative to #7804
Allows other instances of the `sync_simple_transforms` and `propagate_transforms` systems to be added.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
While working on #7784, I noticed that a `#define VAR` in a `.wgsl` file is always effective, even if it its scope is not accepting lines.
Example:
```c
#define A
#ifndef A
#define B
#endif
```
Currently, `B` will be defined although it shouldn't. This PR fixes that.
## Solution
Move the branch responsible for `#define` lines into the last else branch, which is only evaluated if the current scope is accepting lines.
# Objective
- `bevy_text` used to be "optional". the feature could be disabled, which meant that the systems were not added but `bevy_text` was still compiled because of a hard dependency in `bevy_ui`
- Running something without `bevy_text` enabled and with `bevy_ui` enabled now crashes:
```
thread 'main' panicked at 'called `Option::unwrap()` on a `None` value', /bevy/crates/bevy_ecs/src/schedule/schedule.rs:1147:34
```
- This is because `bevy_ui` declares some of its systems in ambiguity sets with systems from `bevy_text`, which were not added if `bevy_text` is disabled
## Solution
- Make `bevy_text` completely optional
## Migration Guide
- feature `bevy_text` now completely removes `bevy_text` from the dependencies when not enabled. Enable feature `bevy_text` if you use Bevy to render text
# Objective
While we use `#[doc(hidden)]` to try and hide marker generics from the user, these types reveal themselves in compiler errors, adding visual noise and confusion.
## Solution
Replace the `AlreadyWasSystem` marker generic with `()`, to reduce visual noise in error messages. This also makes it possible to return `impl Condition<()>` from combinators.
For function systems, use their function signature as the marker type. This should drastically improve the legibility of some error messages.
The `InputMarker` type has been removed, since it is unnecessary.
# Objective
Several places in the ECS use marker generics to avoid overlapping trait implementations, but different places alternately refer to it as `Params` and `Marker`. This is potentially confusing, since it might not be clear that the same pattern is being used. Additionally, users might be misled into thinking that the `Params` type corresponds to the `SystemParam`s of a system.
## Solution
Rename `Params` to `Marker`.
# Objective
There was PR that introduced support for storage buffer is `AsBindGroup` macro [#6129](https://github.com/bevyengine/bevy/pull/6129), but it does not give more granular control over storage buffer, it will always copy all the data no matter which part of it was updated. There is also currently another open PR #6669 that tries to achieve exactly that, it is just not up to date and seems abandoned (Sorry if that is not right). In this PR I'm proposing a solution for both of these approaches to co-exist using `#[storage(n, buffer)]` and `#[storage(n)]` to distinguish between the cases.
We could also discuss in this PR if there is a need to extend this support to DynamicBuffers as well.
# Objective
Fixes#3980
## Solution
Added examples to show how to run a `Schedule`, one with a unique system, and another with several systems
---
## Changelog
- Added: examples in docs to show how to run a `Schedule`
Co-authored-by: remiCzn <77072160+remiCzn@users.noreply.github.com>
# Objective
The `BoxedCondition` type alias does not require the underlying system to be read-only.
## Solution
Define the type alias using `ReadOnlySystem` instead of `System`.
Graph theory make head hurty. Closes#7367.
Basically, when we topologically sort the dependency graph, we already find its strongly-connected components (a really [neat algorithm][1]). This PR adds an algorithm that can dissect those into simple cycles, giving us more useful error reports.
test: `system_build_errors::dependency_cycle`
```
schedule has 1 before/after cycle(s):
cycle 1: system set 'A' must run before itself
system set 'A'
... which must run before system set 'B'
... which must run before system set 'A'
```
```
schedule has 1 before/after cycle(s):
cycle 1: system 'foo' must run before itself
system 'foo'
... which must run before system 'bar'
... which must run before system 'foo'
```
test: `system_build_errors::hierarchy_cycle`
```
schedule has 1 in_set cycle(s):
cycle 1: system set 'A' contains itself
system set 'A'
... which contains system set 'B'
... which contains system set 'A'
```
[1]: https://en.wikipedia.org/wiki/Tarjan%27s_strongly_connected_components_algorithm
# Objective
`cargo run -p ci` is currently failing locally for me.
```
error: variables can be used directly in the `format!` string
--> crates/bevy_reflect/bevy_reflect_derive/src/type_uuid.rs:106:69
|
106 | let uuid = Uuid::parse_str(&uuid).map_err(|err| input.error(format!("{}", err)))?;
```
It's not clear to me why CI/clippy didn't pick this up in #6633.
Add some more useful common run conditions.
Some of these existed in `iyes_loopless`. I know people used them, and it would be a regression for those users, when they try to migrate to new Bevy stageless, if they are missing.
I also took the opportunity to add a few more new ones.
---
## Changelog
### Added
- More "common run conditions": on_event, resource change detection, state_changed, any_with_component
# Objective
`TextBundle` should have a `BackgroundColor` component.
Apart from adding emphasis etc to text, adding a background color to text nodes can be extremely useful for understanding how Bevy aligns, sizes and positions text, and identifying and debugging problems.
It's easy for users to insert the `BackgroundColor` component themselves but not immediately obvious or discoverable that it's possible. A `BackgroundColor` component allows us to add a `with_background_color` helper function to `TextBundle`.
related issue: #5935
## Solution
Add a `BackgroundColor` component to `TextBundle`.
---
## Changelog
* Added a `BackgroundColor` component to `TextBundle`.
* Added a helper method `with_background_color` to `TextBundle`.
## Migration Guide
`TextBundle` now has a `BackgroundColor` component.
Use `TextBundle`'s `background_color` field or the `with_background_color` method to set a background color for text when spawning a text node, in place of manual insertion of a `BackgroundColor` component.
# Objective
When working on #7750 I noticed that `CoreSchedule::Main` was explicitly used to get the schedule for the `OnUpdate` set. This can lead to failures or weird behavior if `add_state` is used with a differently configured `default_schedule_label`, because the other systems are added to the default schedule. This PR fixes that.
## Solution
Use `default_schedule_label` to retrieve a single schedule to which all systems are added.
# Objective
Fix#5026.
## Solution
Only make a `trace!` log if the event count changed.
---
## Changelog
Changed: `EventWriter::send_batch` will only log a TRACE level log if the batch is non-empty.
# Objective
- Adds foundational math for Bezier curves, useful for UI/2D/3D animation and smooth paths.
https://user-images.githubusercontent.com/2632925/218883143-e138f994-1795-40da-8c59-21d779666991.mp4
## Solution
- Adds the generic `Bezier` type, and a `Point` trait. The `Point` trait allows us to use control points of any dimension, as long as they support vector math. I've implemented it for `f32`(1D), `Vec2`(2D), and `Vec3`/`Vec3A`(3D).
- Adds `CubicBezierEasing` on top of `Bezier` with the addition of an implementation of cubic Bezier easing, which is a foundational tool for UI animation.
- This involves solving for $t$ in the parametric Bezier function $B(t)$ using the Newton-Raphson method to find a value with error $\leq$ 1e-7, capped at 8 iterations.
- Added type aliases for common Bezier curves: `CubicBezier2d`, `CubicBezier3d`, `QuadraticBezier2d`, and `QuadraticBezier3d`. These types use `Vec3A` to represent control points, as this was found to have an 80-90% speedup over using `Vec3`.
- Benchmarking shows quadratic/cubic Bezier evaluations $B(t)$ take \~1.8/2.4ns respectively. Easing, which requires an iterative solve takes \~50ns for cubic Beziers.
---
## Changelog
- Added `CubicBezier2d`, `CubicBezier3d`, `QuadraticBezier2d`, and `QuadraticBezier3d` types with methods for sampling position, velocity, and acceleration. The generic `Bezier` type is also available, and generic over any degree of Bezier curve.
- Added `CubicBezierEasing`, with additional methods to allow for smooth easing animations.
# Objective
Fix#7584.
## Solution
Add an abstraction for creating custom system combinators with minimal boilerplate. Use this to implement AND/OR combinators. Use this to simplify the implementation of `PipeSystem`.
## Example
Feel free to bikeshed on the syntax.
I chose the names `and_then`/`or_else` to emphasize the fact that these short-circuit, while I chose method syntax to empasize that the arguments are *not* treated equally.
```rust
app.add_systems((
my_system.run_if(resource_exists::<R>().and_then(resource_equals(R(0)))),
our_system.run_if(resource_exists::<R>().or_else(resource_exists::<S>())),
));
```
---
## Todo
- [ ] Decide on a syntax
- [x] Write docs
- [x] Write tests
## Changelog
+ Added the extension methods `.and_then(...)` and `.or_else(...)` to run conditions, which allows combining run conditions with short-circuiting behavior.
+ Added the trait `Combine`, which can be used with the new `CombinatorSystem` to create system combinators with custom behavior.
# Objective
- Fixes#7636.
## Solution
`apply_state_transitions::<S>` runs in `CoreSet::StateTransitions` which is already scheduled before `CoreSet::Update`. Therefore explicitly scheduling `OnUpdate` after `apply_state_transitions::<S>` is not necessary.
# Objective
- Fixes#7442.
## Solution
- Added `report_sets` option to `ScheduleBuildSettings` like described in the linked issue.
The output of the `3d_scene` example when reporting ambiguities with `report_sets` and `use_shortnames` set to `true` (and with #7755 applied) now looks like this:
```
82 pairs of systems with conflicting data access have indeterminate execution order. Consider adding `before`, `after`, or `ambiguous_with` relationships between these:
-- filesystem_watcher_system (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<DynamicScene> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<Scene> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<Shader> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<Mesh> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<SkinnedMeshInverseBindposes> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<Image> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<TextureAtlas> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<ColorMaterial> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<Font> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<FontAtlasSet> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<StandardMaterial> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<Gltf> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<GltfNode> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<GltfPrimitive> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<GltfMesh> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<AudioSource> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<AudioSink> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- update_asset_storage_system<AnimationClip> (LoadAssets) and apply_system_buffers (FirstFlush)
conflict on: bevy_ecs::world::World
-- scene_spawner_system (Update) and close_when_requested (Update)
conflict on: bevy_ecs::world::World
-- exit_on_all_closed (PostUpdate) and apply_system_buffers (CalculateBoundsFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- exit_on_all_closed (PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- camera_system<Projection> (CameraUpdateSystem, PostUpdate) and apply_system_buffers (CalculateBoundsFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- camera_system<Projection> (CameraUpdateSystem, PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- camera_system<OrthographicProjection> (CameraUpdateSystem, PostUpdate) and apply_system_buffers (CalculateBoundsFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- camera_system<OrthographicProjection> (CameraUpdateSystem, PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- camera_system<PerspectiveProjection> (CameraUpdateSystem, PostUpdate) and apply_system_buffers (CalculateBoundsFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- camera_system<PerspectiveProjection> (CameraUpdateSystem, PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- calculate_bounds (CalculateBounds, PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and visibility_propagate_system (PostUpdate, VisibilityPropagate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and update_text2d_layout (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and ui_stack_system (PostUpdate, Stack)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and text_system (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and update_image_calculated_size_system (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and flex_node_system (Flex, PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and add_clusters (AddClusters, PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and play_queued_audio_system<AudioSource> (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and animation_player (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and propagate_transforms (PostUpdate, TransformPropagate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and sync_simple_transforms (PostUpdate, TransformPropagate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and update_directional_light_cascades (PostUpdate, UpdateDirectionalLightCascades)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and update_clipping_system (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and update_frusta<Projection> (PostUpdate, UpdateProjectionFrusta)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and update_frusta<PerspectiveProjection> (PostUpdate, UpdatePerspectiveFrusta)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (CalculateBoundsFlush, PostUpdate) and update_frusta<OrthographicProjection> (PostUpdate, UpdateOrthographicFrusta)
conflict on: bevy_ecs::world::World
-- visibility_propagate_system (PostUpdate, VisibilityPropagate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- update_text2d_layout (PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- ui_stack_system (PostUpdate, Stack) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- text_system (PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- update_image_calculated_size_system (PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- flex_node_system (Flex, PostUpdate) and apply_system_buffers (AddClustersFlush, PostUpdate)
conflict on: bevy_ecs::world::World
-- flex_node_system (Flex, PostUpdate) and animation_player (PostUpdate)
conflict on: ["bevy_transform::components::transform::Transform"]
-- apply_system_buffers (AddClustersFlush, PostUpdate) and play_queued_audio_system<AudioSource> (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and animation_player (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and propagate_transforms (PostUpdate, TransformPropagate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and sync_simple_transforms (PostUpdate, TransformPropagate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and update_directional_light_cascades (PostUpdate, UpdateDirectionalLightCascades)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and update_clipping_system (PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and update_frusta<Projection> (PostUpdate, UpdateProjectionFrusta)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and update_frusta<PerspectiveProjection> (PostUpdate, UpdatePerspectiveFrusta)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and update_frusta<OrthographicProjection> (PostUpdate, UpdateOrthographicFrusta)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and check_visibility (CheckVisibility, PostUpdate)
conflict on: bevy_ecs::world::World
-- apply_system_buffers (AddClustersFlush, PostUpdate) and update_directional_light_frusta (PostUpdate, UpdateLightFrusta)
conflict on: bevy_ecs::world::World
-- Assets<Scene>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<Shader>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<Mesh>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<SkinnedMeshInverseBindposes>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<Image>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<TextureAtlas>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<ColorMaterial>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<Font>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<FontAtlasSet>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<StandardMaterial>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<Gltf>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<GltfNode>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<GltfPrimitive>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<GltfMesh>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<AudioSource>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<AudioSink>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<AnimationClip>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
-- Assets<DynamicScene>::asset_event_system (AssetEvents) and apply_system_buffers (PostUpdateFlush)
conflict on: bevy_ecs::world::World
```
Co-authored-by: Edgar Geier <geieredgar@gmail.com>
# Objective
While working on #7442 i discovered that `get_short_name` does not work well with sub paths after closing brackets. It currently turns `bevy_asset::assets::Assets<bevy_scene::dynamic_scene::DynamicScene>::asset_event_system` into `Assets<DynamicScene>asset_event_system`. This PR fixes that.
## Solution
- Retain `::` after a closing bracket like `>`, `)` or `]`.
- Add a test for all sub path after closing bracket cases.
# Objective
- Add basic spatial audio support to Bevy
- this is what rodio supports, so no HRTF, just simple stereo channel manipulation
- no "built-in" ECS support: `Emitter` and `Listener` should be components that would automatically update the positions
This PR goal is to just expose rodio functionality, made possible with the recent update to rodio 0.16. A proper ECS integration opens a lot more questions, and would probably require an RFC
Also updates rodio and fixes#6122
# Objective
Allow using `Local<WorldId>` in systems.
## Solution
- Describe the solution used to achieve the objective above.
---
## Changelog
+ `WorldId` now implements the `FromWorld` trait.
# Objective
- Nothing render
```
ERROR bevy_render::render_resource::pipeline_cache: failed to process shader: Invalid shader def definition for '_import_path': bevy_pbr
```
## Solution
- Fix define regex so that it must have one whitespace after `define`
# Objective
- Fixes#7494
- It is now possible to define a ShaderDef from inside a shader. This can be useful to centralise a value, or making sure an import is only interpreted once
## Solution
- Support `#define <SHADERDEF_NAME> <optional value>`
# Objective
- ambiguities bad
## Solution
- solve ambiguities
- by either ignoring (e.g. on `queue_mesh_view_bind_groups` since `LightMeta` access is different)
- by introducing a dependency (`prepare_windows -> prepare_*` because the latter use the fallback Msaa)
- make `prepare_assets` public so that we can do a proper `.after`
# Objective
Currently, it is quite awkward to use the `pbr` function in a custom shader without binding a mesh bind group.
This is because the `pbr` function depends on the `MESH_FLAGS_SHADOW_RECEIVER_BIT` flag.
## Solution
I have removed this dependency by adding the flag as a parameter to the `PbrInput` struct.
I am not sure if this is the ideal solution since the mesh flag indicates both `MESH_FLAGS_SIGN_DETERMINANT_MODEL_3X3_BIT` and `MESH_FLAGS_SHADOW_RECEIVER_BIT`.
The former seems to be unrelated to PBR. Maybe the flag should be split.
# Objective
- Fix the environment map shader not working under webgl due to textureNumLevels() not being supported
- Fixes https://github.com/bevyengine/bevy/issues/7722
## Solution
- Instead of using textureNumLevels(), put an extra field in the GpuLights uniform to store the mip count
# Objective
Splits tone mapping from https://github.com/bevyengine/bevy/pull/6677 into a separate PR.
Address https://github.com/bevyengine/bevy/issues/2264.
Adds tone mapping options:
- None: Bypasses tonemapping for instances where users want colors output to match those set.
- Reinhard
- Reinhard Luminance: Bevy's exiting tonemapping
- [ACES](https://github.com/TheRealMJP/BakingLab/blob/master/BakingLab/ACES.hlsl) (Fitted version, based on the same implementation that Godot 4 uses) see https://github.com/bevyengine/bevy/issues/2264
- [AgX](https://github.com/sobotka/AgX)
- SomewhatBoringDisplayTransform
- TonyMcMapface
- Blender Filmic
This PR also adds support for EXR images so they can be used to compare tonemapping options with reference images.
## Migration Guide
- Tonemapping is now an enum with NONE and the various tonemappers.
- The DebandDither is now a separate component.
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
…top sort. reduce mem alloc
# Objective
- Reduce alloc count.
- Improve code quality.
## Solution
- use `TarjanScc::run` directly, which calls a closure with each scc, in closure, we can detect cycles and flatten nodes
# Objective
`ChangeTrackers<>` is a `WorldQuery` type that lets you access the change ticks for a component. #7097 has added `Ref<>`, which gives access to a component's value in addition to its change ticks. Since bevy's access model does not separate a component's value from its change ticks, there is no benefit to using `ChangeTrackers<T>` over `Ref<T>`.
## Solution
Deprecate `ChangeTrackers<>`.
---
## Changelog
* `ChangeTrackers<T>` has been deprecated. It will be removed in Bevy 0.11.
## Migration Guide
`ChangeTrackers<T>` has been deprecated, and will be removed in the next release. Any usage should be replaced with `Ref<T>`.
```rust
// Before (0.9)
fn my_system(q: Query<(&MyComponent, ChangeTrackers<MyComponent>)>) {
for (value, trackers) in &q {
if trackers.is_changed() {
// Do something with `value`.
}
}
}
// After (0.10)
fn my_system(q: Query<Ref<MyComponent>>) {
for value in &q {
if value.is_changed() {
// Do something with `value`.
}
}
}
```
# Objective
- Updates list of plugins and feature information in `DefaultPlugins` doc comment
- Solve the short term issue of https://github.com/bevyengine/bevy/issues/7332
## Solution
- Update doc comment to reflect current implementation
- Sort plugins by appearance in implementation
# Objective
Fixes#7736
## Solution
Implement the `SystemParam` trait for `WorldId`
## Changelog
- `WorldId` can now be taken as a system parameter and will return the id of the world the system is running in
# Objective
Closes#7573
- Make `StartupSet` a base set
## Solution
- Add `#[system_set(base)]` to the enum declaration
- Replace `.in_set(StartupSet::...)` with `.in_base_set(StartupSet::...)`
**Note**: I don't really know what I'm doing and what exactly the difference between base and non-base sets are. I mostly opened this PR based on discussion in Discord. I also don't really know how to test that I didn't break everything. Your reviews are appreciated!
---
## Changelog
- `StartupSet` is now a base set
## Migration Guide
`StartupSet` is now a base set. This means that you have to use `.in_base_set` instead of `.in_set`:
### Before
```rs
app.add_system(foo.in_set(StartupSet::PreStartup))
```
### After
```rs
app.add_system(foo.in_base_set(StartupSet::PreStartup))
```
# Objective
-0.0 should typically be treated exactly the same as 0.0, but this assertion was rejecting it while allowing 0.0. The `Duration` API handles this correctly (on recent Rust versions) and returns a zero `Duration` for both -0.0 and 0.0.
## Solution
Check for `ratio >= 0.0`, which is true if `ratio` is `-0.0`.
---
## Changelog
Allow relative speed of -0.0 in the `Time::set_relative_speed_fXX` methods.
# Objective
- Fixes#7659.
## Solution
- This PR extracted the `distributive_run_if` part of #7676, because it does not require the controversial introduction of anonymous system sets.
- The distinctive name should make the user aware about the differences between `IntoSystemConfig::run_if` and `IntoSystemConfigs::distributive_run_if`.
- The documentation explains in detail the consequences of using the API and possible pit falls when using it.
- A test demonstrates the possibility of changing the condition result, resulting in some of the systems not being run.
---
## Changelog
### Added
- Add `distributive_run_if` to `IntoSystemConfigs` to enable adding a run condition to each system when using `add_systems`.
# Objective
`bevy_reflect` can be a moderately complex crate to try and understand. It has many moving parts, a handful of gotchas, and a few subtle contracts that aren't immediately obvious to users and even other contributors.
The current README does an okay job demonstrating how the crate can be used. However, the crate's actual documentation should give a better overview of the crate, its inner-workings, and show some of its own examples.
## Solution
Added crate-level documentation that attempts to summarize the main parts of `bevy_reflect` into small sections.
This PR also updates the documentation for:
- `Reflect`
- `FromReflect`
- The reflection subtraits
- Other important types and traits
- The reflection macros (including the derive macros)
- Crate features
### Open Questions
1. ~~Should I update the docs for the Dynamic types? I was originally going to, but I'm getting a little concerned about the size of this PR 😅~~ Decided to not do this in this PR. It'll be better served from its own PR.
2. Should derive macro documentation be moved to the trait itself? This could improve visibility and allow for better doc links, but could also clutter up the trait's documentation (as well as not being on the actual derive macro's documentation).
### TODO
- [ ] ~~Document Dynamic types (?)~~ I think this should be done in a separate PR.
- [x] Document crate features
- [x] Update docs for `GetTypeRegistration`
- [x] Update docs for `TypeRegistration`
- [x] Update docs for `derive_from_reflect`
- [x] Document `reflect_trait`
- [x] Document `impl_reflect_value`
- [x] Document `impl_from_reflect_value`
---
## Changelog
- Updated documentation across the `bevy_reflect` crate
- Removed `#[module]` helper attribute for `Reflect` derives (this is not currently used)
## Migration Guide
- Removed `#[module]` helper attribute for `Reflect` derives. If your code is relying on this attribute, please replace it with either `#[reflect]` or `#[reflect_value]` (dependent on use-case).
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
follow-up to https://github.com/bevyengine/bevy/pull/7716
# Objective
System access is only populated in `System::initialize`, so without calling `initialize` it's actually impossible to see most ambiguities.
## Solution
- make `initialize` public. The method is idempotent, so calling it multiple times doesn't hurt
# Objective
Continuation of https://github.com/bevyengine/bevy/pull/5719
Now that we have a definable type for the iterator.
---
## Changelog
- Implemented IntoIterator for EventReader so you can now do `&mut reader` instead of `reader.iter()` for events.
# Objective
- bevy_ggrs uses `reflect_hash` in order to produce checksums for its world snapshots. These checksums are sent between clients in order to detect desyncronization.
- However, since we currently use `async::AHasher` with the `std` feature, this means that hashes will always be different for different peers, even if the state is identical.
- This means bevy_ggrs needs a way to get a deterministic (fixed) hash.
## Solution
- ~~Add a feature to use `bevy_utils::FixedState` for the hasher used by bevy_reflect.~~
- Always use `bevy_utils::FixedState` for initializing the bevy_reflect hasher.
---
## Changelog
- bevy_reflect now uses a fixed state for its hasher, which means the output of `Reflect::reflect_hash` is now deterministic across processes.
# Objective
Fix#7440. Fix#7441.
## Solution
* Remove builder functions on `ScheduleBuildSettings` in favor of public fields, move docs to the fields.
* Add `use_shortnames` and use it in `get_node_name` to feed it through `bevy_utils::get_short_name`.
# Objective
Allow for creating pipelines that use push constants. To be able to use push constants. Fixes#4825
As of right now, trying to call `RenderPass::set_push_constants` will trigger the following error:
```
thread 'main' panicked at 'wgpu error: Validation Error
Caused by:
In a RenderPass
note: encoder = `<CommandBuffer-(0, 59, Vulkan)>`
In a set_push_constant command
provided push constant is for stage(s) VERTEX | FRAGMENT | VERTEX_FRAGMENT, however the pipeline layout has no push constant range for the stage(s) VERTEX | FRAGMENT | VERTEX_FRAGMENT
```
## Solution
Add a field push_constant_ranges to` RenderPipelineDescriptor` and `ComputePipelineDescriptor`.
This PR supersedes #4908 which now contains merge conflicts due to significant changes to `bevy_render`.
Meanwhile, this PR also made the `layout` field of `RenderPipelineDescriptor` and `ComputePipelineDescriptor` non-optional. If the user do not need to specify the bind group layouts, they can simply supply an empty vector here. No need for it to be optional.
---
## Changelog
- Add a field push_constant_ranges to RenderPipelineDescriptor and ComputePipelineDescriptor
- Made the `layout` field of RenderPipelineDescriptor and ComputePipelineDescriptor non-optional.
## Migration Guide
- Add push_constant_ranges: Vec::new() to every `RenderPipelineDescriptor` and `ComputePipelineDescriptor`
- Unwrap the optional values on the `layout` field of `RenderPipelineDescriptor` and `ComputePipelineDescriptor`. If the descriptor has no layout, supply an empty vector.
Co-authored-by: Zhixing Zhang <me@neoto.xin>
# Objective
Fixes#7295
Should we maybe default to 4x if 2x/8x is selected but not supported?
---
## Changelog
- Added 2x and 8x sample counts for MSAA.
# Objective
- Environment maps use these formats, and in the future rendering LUTs will need textures loaded by default in the engine
## Solution
- Make ktx2 and zstd part of the default feature
- Let examples assume these features are enabled
---
## Changelog
- `ktx2` and `zstd` are now party of bevy's default enabled features
## Migration Guide
- If you used the `ktx2` or `zstd` features, you no longer need to explicitly enable them, as they are now part of bevy's default enabled features
# Objective
The type `SyncCell<T>` (added in #5483) is used to force any wrapped type to be `Sync`, by only allowing exclusive access to the wrapped value. This restriction is unnecessary for types which are already `Sync`.
---
## Changelog
+ Added the method `read` to `SyncCell`, which allows shared access to values that already implement the `Sync` trait.
# Objective
Web builds do not support running on multiple threads right now. Defaulting to the multi-threaded executor has significant overhead without any benefit.
## Solution
Default to the single threaded executor on wasm32 builds.
# Objective
- other tools (bevy_mod_debugdump) would like to have access to the ambiguities so that they can do their own reporting/visualization
## Solution
- store `conflicting_systems` in `ScheduleGraph` after calling `build_schedule`
The solution isn't very pretty and as pointed out it https://github.com/bevyengine/bevy/pull/7522, there may be a better way of exposing this, but this is the quick and dirty way if we want to have this functionality exposed in 0.10.
# Objective
- RemovedComponents is just a thin wrapper around Events/ManualEventReader which is the same as an EventReader, so most usecases that of an EventReader will probably be useful for RemovedComponents too.
I was thinking of making a trait for this but I don't think it is worth the overhead currently.
## Solution
- Mirror the api surface of EventReader
# Objective
Motivated by #7469.
`EventReader` iterators use the default implementations for `.nth()` and `.last()`, which includes iterating over and throwing out all events before the desired one.
## Solution
Add specialized implementations for these methods that directly updates the unread event counter and returns a reference to the desired event.
TODO:
- [x] Add a unit test.
- [x] ~~Add a benchmark, to see if the compiler was doing this automatically already.~~ *On second thought, this doesn't feel like a very useful thing to include in the benchmark suite.*
# Objective
- it would be nice to be able to associate a `NodeId` of a system type set to the `NodeId` of the actual system (used in bevy_mod_debugdump)
## Solution
- make `system_type` return the type id of the system
- that way you can check if a `dyn SystemSet` is the system type set of a `dyn System`
- I don't know if this information is already present somewhere else in the scheduler or if there is a better way to expose it
# Objective
Fixes#7702.
## Solution
- Added an test that ensures that no error is returned if a system or set is inside two different sets that share the same base set.
- Added an check to only return an error if the two base sets are not equal.
# Objective
The `ScheduleGraph` should be expose so that crates like [bevy_mod_debugdump](https://github.com/jakobhellermann/bevy_mod_debugdump/blob/stageless/docs/README.md) can access useful information.
## Solution
- expose `ScheduleGraph`, `NodeId`, `BaseSetMembership`, `Dag`
- add accessor functions for sets and systems
## Changelog
- expose `ScheduleGraph` for use in third party tools
This does expose our use of `petgraph` as a graph library, so we can only change that as a breaking change.
# Objective
- Fixes#5432
- Fixes#6680
## Solution
- move code responsible for generating the `impl TypeUuid` from `type_uuid_derive` into a new function, `gen_impl_type_uuid`.
- this allows the new proc macro, `impl_type_uuid`, to call the code for generation.
- added struct `TypeUuidDef` and implemented `syn::Parse` to allow parsing of the input for the new macro.
- finally, used the new macro `impl_type_uuid` to implement `TypeUuid` for the standard library (in `crates/bevy_reflect/src/type_uuid_impl.rs`).
- fixes#6680 by doing a wrapping add of the param's index to its `TYPE_UUID`
Co-authored-by: dis-da-moe <84386186+dis-da-moe@users.noreply.github.com>
# Objective
The trait `Condition<>` is implemented for any type that can be converted into a `ReadOnlySystem` which takes no inputs and returns a bool. However, due to the current implementation, consumers of the trait cannot rely on the fact that `<T as Condition>::System` implements `ReadOnlySystem`. In cases such as the `not` combinator (added in #7559), we are required to add redundant `T::System: ReadOnlySystem` trait bounds, even though this should be implied by the `Condition<>` trait.
## Solution
Add a hidden associated type which allows the compiler to figure out that the `System` associated type implements `ReadOnlySystem`.
…able like Table. Rename clear to clear_entities to clarify that metadata keeps, only value cleared
# Objective
- Provide some inspectability for SparseSets.
## Solution
- `Tables` has these three methods, len, is_empty and iter too. Add these methods to `SparseSets`, so user can print the shape of storage.
---
## Changelog
> This section is optional. If this was a trivial fix, or has no externally-visible impact, you can delete this section.
- Add `len`, `is_empty`, `iter` methods on SparseSets.
- Rename `clear` to `clear_entities` to clarify its purpose.
- Add `new_for_test` on `ComponentInfo` to make test code easy.
- Add test case covering new methods.
## Migration Guide
> This section is optional. If there are no breaking changes, you can delete this section.
- Simply adding new functionality is not a breaking change.
# Objective
This PR improves message that caused by duplicate components in bundle.
## Solution
Show names of duplicate components.
The solution is not very elegant, in my opinion, I will be happy to listen to suggestions for improving it
Co-authored-by: Саня Череп <41489405+SDesya74@users.noreply.github.com>
# Objective
While porting my crate `bevy_trait_query` to bevy 0.10, I ran into an issue with the `DetectChangesMut` trait. Due to the way that the `set_if_neq` method (added in #6853) is implemented, you are forced to write a nonsense implementation of it for dynamically sized types. This edge case shows up when implementing trait queries, since `DetectChangesMut` is implemented for `Mut<dyn Trait>`.
## Solution
Simplify the generics for `set_if_neq` and add the `where Self::Target: Sized` trait bound to it. Add a default implementation so implementers don't need to implement a method with nonsensical trait bounds.
# Objective
The `SystemParamFunction` (and `ExclusiveSystemParamFunction`) trait is very cumbersome to use, due to it requiring four generic type parameters. These are currently all used as marker parameters to satisfy rust's trait coherence rules.
### Example (before)
```rust
pub fn pipe<AIn, Shared, BOut, A, AParam, AMarker, B, BParam, BMarker>(
mut system_a: A,
mut system_b: B,
) -> impl FnMut(In<AIn>, ParamSet<(AParam, BParam)>) -> BOut
where
A: SystemParamFunction<AIn, Shared, AParam, AMarker>,
B: SystemParamFunction<Shared, BOut, BParam, BMarker>,
AParam: SystemParam,
BParam: SystemParam,
```
## Solution
Turn the `In`, `Out`, and `Param` generics into associated types. Merge the marker types together to retain coherence.
### Example (after)
```rust
pub fn pipe<A, B, AMarker, BMarker>(
mut system_a: A,
mut system_b: B,
) -> impl FnMut(In<A::In>, ParamSet<(A::Param, B::Param)>) -> B::Out
where
A: SystemParamFunction<AMarker>,
B: SystemParamFunction<BMarker, In = A::Out>,
```
---
## Changelog
+ Simplified the `SystemParamFunction` and `ExclusiveSystemParamFunction` traits.
## Migration Guide
For users of the `SystemParamFunction` trait, the generic type parameters `In`, `Out`, and `Param` have been turned into associated types. The same has been done with the `ExclusiveSystemParamFunction` trait.
