# Objective
`AsSystemLabel` has been introduced on system descriptors to make ordering systems more convenient, but `SystemSet::before` and `SystemSet::after` still take `SystemLabels` directly:
use bevy::ecs::system::AsSystemLabel;
/*…*/ SystemSet::new().before(foo.as_system_label()) /*…*/
is currently necessary instead of
/*…*/ SystemSet::new().before(foo) /*…*/
## Solution
Use `AsSystemLabel` for `SystemSet`
The only way to soundly use this API is already encapsulated within `EntityMut::get`, so this api is removed.
# Migration guide
Replace calls to `EntityMut::get_unchecked` with calls to `EntityMut::get`.
# Objective
When using `derive(WorldQuery)`, then clippy complains with the following:
```rust
warning: missing documentation for a struct
--> src\wild_boar_type\marker_vital_status.rs:35:17
|
35 | #[derive(Debug, WorldQuery)]
| ^^^^^^^^^^
|
= note: this warning originates in the derive macro `WorldQuery` (in Nightly builds, run with -Z macro-backtrace for more info)
```
## Solution
* Either `#[doc(hidden)]` or
* Add a generic documentation line to it.
I don't know what is preferred, but I'd gladly add it in here.
# Objective
- The current API docs of `Commands` is very short and is very opaque to newcomers.
## Solution
- Try to explain what it is without requiring knowledge of other parts of `bevy_ecs` like `World` or `SystemParam`.
Co-authored-by: Charles <IceSentry@users.noreply.github.com>
Free at last!
# Objective
- Using `.system()` is no longer needed anywhere, and anyone using it will have already gotten a deprecation warning.
- https://github.com/bevyengine/bevy/pull/3302 was a super special case for `.system()`, since it was so prevelant. However, that's no reason.
- Despite it being deprecated, another couple of uses of it have already landed, including in the deprecating PR.
- These have all been because of doc examples having warnings not breaking CI - 🎟️?
## Solution
- Remove it.
- It's gone
---
## Changelog
- You can no longer use `.system()`
## Migration Guide
- You can no longer use `.system()`. It was deprecated in 0.7.0, and you should have followed the deprecation warning then. You can just remove the method call.
- Thanks to the @TheRawMeatball for producing
# Objective
- Fix `ClusterConfig::None`
- This fix is from @robtfm but they didn't have time to submit it, so I am.
## Solution
- Always clear clusters and skip processing when `ClusterConfig::None`
- Conditionally remove `VisiblePointLights` from the view if it is present
# Objective
- https://github.com/bevyengine/bevy/pull/4098 still hasn't fixed minimisation on Windows.
- `Clusters.lights` is assumed to have the number of items given by the product of `Clusters.dimensions`'s axes.
## Solution
- Make that true in `clear`.
# Objective
- Fixes#4234
- Fixes#4473
- Built on top of #3989
- Improve performance of `assign_lights_to_clusters`
## Solution
- Remove the OBB-based cluster light assignment algorithm and calculation of view space AABBs
- Implement the 'iterative sphere refinement' algorithm used in Just Cause 3 by Emil Persson as documented in the Siggraph 2015 Practical Clustered Shading talk by Persson, on pages 42-44 http://newq.net/dl/pub/s2015_practical.pdf
- Adapt to also support orthographic projections
- Add `many_lights -- orthographic` for testing many lights using an orthographic projection
## Results
- `assign_lights_to_clusters` in `many_lights` before this PR on an M1 Max over 1500 frames had a median execution time of 1.71ms. With this PR it is 1.51ms, a reduction of 0.2ms or 11.7% for this system.
---
## Changelog
- Changed: Improved cluster light assignment performance
Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- in #3851, a feature for tracing was added to bevy_transform
- usage of that feature was moved to bevy_hierarchy, but the feature was not updated
## Solution
- add the feature to bevy_hierarchy, remove it from bevy_transform
# Objective
- Provide more information when despawning an entity
## Solution
- Add a debug log when despawning an entity
- Add spans to the recursive ways of despawning an entity
```sh
RUST_LOG=debug cargo run --example panic --features trace
# RUST_LOG=debug needed to show debug logs from bevy_ecs
# --features trace needed to have the extra spans
...
DEBUG bevy_app:frame:stage{name=Update}:system_commands{name="panic::despawn_parent"}:command{name="DespawnRecursive" entity=0v0}: bevy_ecs::world: Despawning entity 1v0
DEBUG bevy_app:frame:stage{name=Update}:system_commands{name="panic::despawn_parent"}:command{name="DespawnRecursive" entity=0v0}: bevy_ecs::world: Despawning entity 0v0
```
## Objective
Fixes#4122.
## Solution
Inherit the visibility of the struct being derived for the `xxItem`, `xxFetch`, `xxState` structs.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
The documentation of the `Time::last_update` and `Time::time_since_startup` methods contains typos. It uses apostrophe instead of backtick characters around `Instant` and `Duration`, so that these words are not recognized as identifiers in the generated API documentation. This should be fixed.
## Solution
Fix the typos.
# Objective
Fixes https://github.com/bevyengine/bevy/issues/3499
## Solution
Uses a `HashMap` from `RenderTarget` to sampled textures when preparing `ViewTarget`s to ensure that two passes with the same render target get sampled to the same texture.
This builds on and depends on https://github.com/bevyengine/bevy/pull/3412, so this will be a draft PR until #3412 is merged. All changes for this PR are in the last commit.
# Objective
glTF files can contain cameras. Currently the scene viewer example uses _a_ camera defined in the file if possible, otherwise it spawns a new one. It would be nice if instead it could load all the cameras and cycle through them, while also having a separate user-controller camera.
## Solution
- instead of just a camera that is already defined, always spawn a new separate user-controller camera
- maintain a list of loaded cameras and cycle through them (wrapping to the user-controller camera) when pressing `C`
This matches the behavious that https://github.khronos.org/glTF-Sample-Viewer-Release/ has.
## Implementation notes
- The gltf scene asset loader just spawns the cameras into the world, but does not return a mapping of camera index to bevy entity. So instead the scene_viewer example just collects all spawned cameras with a good old `query.iter().collect()`, so the order is unspecified and may change between runs.
## Demo
https://user-images.githubusercontent.com/22177966/161826637-40161482-5b3b-4df5-aae8-1d5e9b918393.mp4
using the virtual city glTF sample file: https://github.com/KhronosGroup/glTF-Sample-Models/tree/master/2.0/VC
Co-authored-by: Jakob Hellermann <hellermann@sipgate.de>
# Objective
- While playing with volume, I noticed that when setting the volume just after playback start, I still get a few milliseconds at normal volume
## Solution
- Replace `play_in_loop` with `play_with_settings` that allows from more controls
- Adds a `PlaybackSettings` to specify the settings from start. Can be used: `PlaybackSettings::LOOP.with_volume(0.75)`
Currently `tracy` interprets the entire trace as one frame because the marker for frames isn't being recorded.
~~When an event with `tracy.trace_marker=true` is recorded, `tracing-tracy` will mark the frame as finished:
<aa0b96b2ae/tracing-tracy/src/lib.rs (L240)>~~
~~Unfortunately this leads to~~
```rs
INFO bevy_app:frame: bevy_app::app: finished frame tracy.frame_mark=true
```
~~being printed every frame (we can't use DEBUG because bevy_log sets `max_release_level_info`.~~
Instead of emitting an event that gets logged every frame, we can depend on tracy-client itself and call `finish_continuous_frame!();`
# Objective
- Fixes the issue with orthographic camera imported from glTF not displaying anything (mentioned in #4005).
## Solution
- This was due to wrong scaling mode being used. This PR simply changes WindowSize scaling mode to FixedHorizontal.
## Important Note
Currently, othographic scale in Blender, three.js, and possibly other software does not translate to Bevy (via glTF) because their developers have [misinterpreted the spec](https://github.com/KhronosGroup/glTF/issues/1663#issuecomment-618194015). The camera parameters have been clarified in glTF 2.0, which was released on October of 2021. In Blender 3.0.1 this issue has **not** been fixed yet. If you are importing orthographic cameras from Blender, you have to divide the scale by 2.
# Objective
- Previously, `iter_combinations()` does not work on queries that have filters.
- Fixes#3651
## Solution
- Derived Copy on all `*Fetch<T>` structs, and manually implemented `Clone` to allow the test to pass (`.count()` does not work on `QueryCombinationIter` when `Clone` is derived)
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Make `set_active_camera` system correctly respond to camera deletion, while preserving its correct behavior on first ever frame and any consequent frame, and with multiple cameras of the same type available in the world.
- Fixes#4227
## Solution
- Add a check that the entity referred to by `ActiveCamera` still exists in the world.
# Objective
- In glTF, mesh can be named. This named is used to be able to reference the mesh, but not as a component on the entity
- Bevy only added the node name to the parent node.
## Solution
- Also adds the name on the mesh entity if there is one.
Limitation: In glTF, it's possible to have one mesh (which can be named) corresponding to several primitives (which can't, but are the actual mesh). I added the mesh name to the entity with the `PbrBundle` matching the primitives, which means that a mesh with several primitives would all have the same name. I think this is acceptable...
# Objective
- Make it possible to use `System`s outside of the scheduler/executor without having to define logic to track new archetypes and call `System::add_archetype()` for each.
## Solution
- Replace `System::add_archetype(&Archetype)` with `System::update_archetypes(&World)`, making systems responsible for tracking their own most recent archetype generation the way that `SystemState` already does.
This has minimal (or simplifying) effect on most of the code with the exception of `FunctionSystem`, which must now track the latest `ArchetypeGeneration` it saw instead of relying on the executor to do it.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fixes#4193
## Solution
When resetting a node's `Interaction` to `None`, ignore any `Clicked` node because that should be handled by the mouse release check exclusively.
Remove the 'chaining' api, as it's peculiar
~~Implement the label traits for `Box<dyn ThatTrait>` (n.b. I'm not confident about this change, but it was the quickest path to not regressing)~~
Remove the need for '`.system`' when using run criteria piping
# Objective
- While animating 501 https://github.com/KhronosGroup/glTF-Sample-Models/tree/master/2.0/BrainStem, I noticed things were getting a little slow
- Looking in tracy, the system `extract_skinned_meshes` is taking a lot of time, with a mean duration of 15.17ms
## Solution
- ~~Use `Vec` instead of a `SmallVec`~~
- ~~Don't use an temporary variable~~
- Compute the affine matrix as an `Affine3A` instead
- Remove the `temp` vec
| |mean|
|---|---|
|base|15.17ms|
|~~vec~~|~~9.31ms~~|
|~~no temp variable~~|~~11.31ms~~|
|removing the temp vector|8.43ms|
|affine|13.21ms|
|all together|7.23ms|
# Objective
- Make use of storage buffers, where they are available, for clustered forward bindings to support far more point lights in a scene
- Fixes#3605
- Based on top of #4079
This branch on an M1 Max can keep 60fps with about 2150 point lights of radius 1m in the Sponza scene where I've been testing. The bottleneck is mostly assigning lights to clusters which grows faster than linearly (I think 1000 lights was about 1.5ms and 5000 was 7.5ms). I have seen papers and presentations leveraging compute shaders that can get this up to over 1 million. That said, I think any further optimisations should probably be done in a separate PR.
## Solution
- Add `RenderDevice` to the `Material` and `SpecializedMaterial` trait `::key()` functions to allow setting flags on the keys depending on feature/limit availability
- Make `GpuPointLights` and `ViewClusterBuffers` into enums containing `UniformVec` and `StorageBuffer` variants. Implement the necessary API on them to make usage the same for both cases, and the only difference is at initialisation time.
- Appropriate shader defs in the shader code to handle the two cases
## Context on some decisions / open questions
- I'm using `max_storage_buffers_per_shader_stage >= 3` as a check to see if storage buffers are supported. I was thinking about diving into 'binding resource management' but it feels like we don't have enough use cases to understand the problem yet, and it is mostly a separate concern to this PR, so I think it should be handled separately.
- Should `ViewClusterBuffers` and `ViewClusterBindings` be merged, duplicating the count variables into the enum variants?
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
The `bevy_app` crate has a lot of inconsistencies in the documentation (formatting, spelling, phrasing, consistency).
## Solution
Make it more consistent.
# Objective
- Fix#4416
- The scene has two root nodes, with the second one being the animation root
## Solution
- Check all scene root nodes, and add the `AnimationPlayer` component to nodes that are also animation roots
# Objective
Make `FromWorld` more useful for abstractions with a form similar to
```rs
trait FancyAbstraction {
type PreInitializedData: FromWorld;
}
```
## Solution
Add a `FromWorld` implementation for `SystemState` as well as a way to group together multiple `FromWorld` implementing types as one.
Note: I plan to follow up this PR with another to add `Local` support to exclusive systems, which should get a fair amount of use from the `FromWorld` implementation on `SystemState`.
# Objective
Avoid crashing if `RenderDevice` doesn't exist (required for headless mode).
Fixes#4392.
## Solution
Use `CompressedImageFormats::all()` if there is no `RenderDevice`.
# Objective
- Revert #4410
- `Input<T>.clear()` is the method call at the end of each frame for inputs. Clearing `pressed` in it mean that checking if a key is pressed will always return false
# Objective
- Fixes#1616, fixes#2225
- Let user specify an anchor for a sprite
## Solution
- Add an enum for an anchor point for most common values, with a variant for a custom point
- Defaults to Center to not change current behaviour
Co-authored-by: François <8672791+mockersf@users.noreply.github.com>
Fixes#3408#3001 also solves this but I dont see it getting merged any time soon so...
# Objective
make bevy ecs a lil bit less unsound
## Solution
make `EntityMut::get_component_mut` return borrows from self instead of `'w`
# Objective
- Animation is using `Name` to be able to address nodes in an entity free way
- When loading random animated gltf files, I noticed some had animations without names sometimes
## Solution
- Add default names to all nodes
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/2096
## Solution
- This PR enables the drag-and-drop feature for winit on windows again, as the collision issue between cpal and winit has been fixed in https://github.com/RustAudio/cpal/pull/597. I confirmed the drag and drop example working on windows 10 with this change.
- ~~It also bumps the rodio version, though this is not strictly necessary.~~
# Objective
- While playing with animated models, I noticed some were a little off
## Solution
- Some animations curves only have one keyframe, they are used to set a transform to a given value
- Those were ignored as we're never exactly at the ts 0.0 of an animation. going there explicitly (`.set_elapsed(0.0).pause()`) would crash
- Special case this as there isn't much to animate in this case
https://en.wikipedia.org/wiki/HSL_and_HSV#From_RGB
# Objective
Fixes#4382
## Solution
- Describe the solution used to achieve the objective above.
Fixed conversion formula to account for red and green component being max and equal
---
## Changelog
Fixed RGB -> HSL colorspace conversion
## Migration Guide
Co-authored-by: Francesco Giordana <fgiordana@netflix.com>
# Objective
- Part of the splitting process of #3503.
## Solution
- Remove the `face_toward.rs` file containing the `FaceToward` trait.
## Reasons
- It is unused inside of `bevy`.
- The method `Mat4::face_toward` of the trait is identical to `Mat4::look_at_rh` (see https://docs.rs/glam/latest/glam/f32/struct.Mat4.html#method.look_at_rh).
- Discussion in #3503.
## Changelog
### Removed
- The `FaceToward` trait got removed.
## Migration Guide
- The `FaceToward` trait got removed. To migrate you just have to change every occurrence of `Mat4::face_toward` to `Mat4::look_at_rh`.
# Objective
- Since #4224, using labels which only refer to one system doesn't make sense.
## Solution
- Remove some of those.
## Future work
- We should remove the ability to use strings as system labels entirely. I haven't in this PR because there are tests which use this, and that's a lot of code to change.
- The only use cases for labels are either intra-crate, which use #4224, or inter-crate, which should either use #4224 or explicit types. Neither of those should use strings.
# Objective
- std's new APIs do the same thing as `Query::get_multiple_mut`, but are called `get_many`: https://github.com/rust-lang/rust/pull/83608
## Solution
- Find and replace `get_multiple` with `get_many`
# Objective
Make it so that loading in a mesh without normals that is not a `TriangleList` succeeds.
## Solution
Flat normals can only be calculated on a mesh made of triangles.
Check whether the mesh is a `TriangleList` before trying to compute missing normals.
## Additional changes
The panic condition in `duplicate_vertices` did not make sense to me. I moved it to `compute_flat_normals` where the algorithm would produce incorrect results if the mesh is not a `TriangleList`.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
- Clarify `RemovedComponents` are flushed in `CoreStage::Last` and systems relying on that should run before that stage
## Solution
- Update `RemovedComponents` doc comment
# Objective
make bevy ecs a lil bit less unsound
## Solution
make unsound API unsafe so that there is an unsafe block to blame:
```rust
use bevy_ecs::prelude::*;
#[derive(Debug, Component)]
struct Foo(u8);
fn main() {
let mut world = World::new();
let e1 = world.spawn().id();
let e2 = world.spawn().insert(Foo(2)).id();
world.entities_mut().meta[0] = world.entities_mut().meta[1].clone();
let foo = world.entity(e1).get::<Foo>().unwrap();
// whoo i love having components i dont have
dbg!(foo);
}
```
This is not _strictly_ speaking UB, however:
- `Query::get_multiple` cannot work if this is allowed
- bevy_ecs is a pile of unsafe code whose soundness generally depends on the world being in a "correct" state with "no funny business" so it seems best to disallow this
- it is trivial to get bevy to panic inside of functions with safety invariants that have been violated (the entity location is not valid)
- it seems to violate what the safety invariant on `Entities::flush` is trying to ensure
# Objective
An entity spawned with `MaterialMesh2dBundle<M>` cannot be saved and spawned using `DynamicScene` because the `Mesh2dHandle` component does not `impl Reflect`.
## Solution
Add `#[derive(Reflect)]` and `#[reflect(Component)]` to `Mesh2dHandle`, and call `register_type` in `SpritePlugin`. Also add `#[derive(Debug)]` since I'm touching the `derive`s anyway.
# Objective
Animation with shadows crashes with:
```
thread 'main' panicked at 'wgpu error: Validation Error
Caused by:
In Device::create_render_pipeline
note: label = `shadow_pipeline`
error matching VERTEX shader requirements against the pipeline
shader global ResourceBinding { group: 1, binding: 1 } is not available in the layout pipeline layout
visibility flags don't include the shader stage
```
Animation with wireframe crashes with:
```
thread 'main' panicked at 'wgpu error: Validation Error
Caused by:
In Device::create_render_pipeline
note: label = `opaque_mesh_pipeline`
error matching VERTEX shader requirements against the pipeline
shader global ResourceBinding { group: 2, binding: 0 } is not available in the layout pipeline layout
binding is missing from the pipeline layout
```
## Solution
- Fix the bindings
# Objective
- The inability to have multiple active mutable borrows into a query is a common source of borrow-checker pain for users.
- This is a pointless restriction if and only if we can guarantee that the entities they are accessing are unique.
- This could already by bypassed with get_unchecked, but that is an extremely unsafe API.
- Closes https://github.com/bevyengine/bevy/issues/2042.
## Solution
- Add `get_multiple`, `get_multiple_mut` and their unchecked equivalents (`multiple` and `multiple_mut`) to `Query` and `QueryState`.
- Improve the `QueryEntityError` type to provide more useful error information.
## Changelog
- Added `get_multiple`, `get_multiple_mut` and their unchecked equivalents (`multiple` and `multiple_mut`) to Query and QueryState.
## Migration Guide
- The `QueryEntityError` enum now has a `AliasedMutability variant, and returns the offending entity.
## Context
This is a fresh attempt at #3333; rebasing was behaving very badly and it was important to rebase on top of the recent query soundness fixes. Many thanks to all the reviewers in that thread, especially @BoxyUwU for the help with lifetimes.
## To-do
- [x] Add compile fail tests
- [x] Successfully deduplicate code
- [x] Decide what to do about failing doc tests
- [x] Get some reviews for lifetime soundness
# Objective
Add a system parameter `ParamSet` to be used as container for conflicting parameters.
## Solution
Added two methods to the SystemParamState trait, which gives the access used by the parameter. Did the implementation. Added some convenience methods to FilteredAccessSet. Changed `get_conflicts` to return every conflicting component instead of breaking on the first conflicting `FilteredAccess`.
Co-authored-by: bilsen <40690317+bilsen@users.noreply.github.com>
# Objective
Cleans up some duplicated color -> u32 conversion code in `bevy_sprite` and `bevy_ui`
## Solution
Use `as_linear_rgba_u32` which was added recently by #4088
# Objective
Fixes#4344.
## Solution
Add a new component `Text2dBounds` to `Text2dBundle` that specifies the maximum width and height of text. Text will wrap according to this size.
# Objective
- Part of the splitting process of #3692.
## Solution
- Change the `gamepad_connection_system` to run after the `InputSystem` label.
## Reasons
I changed the `gamepad_connection_system` to run after the `InputSystem` instead of in parallel, because this system checks the `GamepadEvent`s which get send inside of the `gamepad_event_system`. This means that the `gamepad_connection_system` could respond to the events one frame later, instead of instantly resulting in one frame lag.
Old possible case:
1. `gamepad_connection_system` (reacts to the `GamepadEvent`s too early)
2. `gamepad_event_system` (sends the `GamepadEvent`s)
New fixed ordering:
1. `gamepad_event_system` (sends the `GamepadEvent`s)
2. `gamepad_connection_system` (reacts to the `GamepadEvent`s)
# Objective
- Closes#335.
- Part of the splitting process of #3503.
## Solution
- Remove the `margins.rs` file containing the `Margins` type.
## Reasons
- It is unused inside of `bevy`.
- The `Rect`/`UiRect` is identical to the `Margins` type and is also used for margins inside of `bevy` (rename of `Rect` happens in #4276)
- Discussion in #3503.
## Changelog
### Removed
- The `Margins` type got removed.
## Migration Guide
- The `Margins` type got removed. To migrate you just have to change every occurrence of `Margins` to `UiRect`.
# Objective
We are currently inserting an `input` into `pressed` even if it is already pressed. This also applies to releasing an input. This is not a big deal, but since we are already checking if the `input` is pressed or not we might as well remove the cost of the value update caused by the `pressed.insert` method.
Related to #4209
## Solution
Only insert or remove input if needed.
related: https://github.com/bevyengine/bevy/pull/3289
In addition to validating shaders early when debug assertions are enabled, use the new [error scopes](https://gpuweb.github.io/gpuweb/#error-scopes) API when creating a shader module.
I chose to keep the early validation (and thereby parsing twice) when debug assertions are enabled in, because it lets as handle errors ourselves and display them with pretty colors, while the error scopes API just gives us a string we can display.
This change pulls in `futures-util` as a new dependency for `future.now_or_never()`. I can inline that part of futures-lite into `bevy_render` to keep the compilation time lower if that's preferred.
# Objective
Fixes `StandardMaterial` texture update (see sample code below).
Most probably fixes#3674 (did not test)
## Solution
Material updates, such as PBR update, reference the underlying `GpuImage`. Like here: 9a7852db0f/crates/bevy_pbr/src/pbr_material.rs (L177)
However, currently the `GpuImage` update may actually happen *after* the material update fetches the gpu image. Resulting in the material actually not being updated for the correct gpu image.
In this pull req, I introduce new systemlabels for the renderassetplugin. Also assigned the RenderAssetPlugin::<Image> to the `PreAssetExtract` stage, so that it is executed before any material updates.
Code to test.
Expected behavior:
* should update to red texture
Unexpected behavior (before this merge):
* texture stays randomly as green one (depending on the execution order of systems)
```rust
use bevy::{
prelude::*,
render::render_resource::{Extent3d, TextureDimension, TextureFormat},
};
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.add_startup_system(setup)
.add_system(changes)
.run();
}
struct Iteration(usize);
#[derive(Component)]
struct MyComponent;
fn setup(
mut commands: Commands,
mut meshes: ResMut<Assets<Mesh>>,
mut materials: ResMut<Assets<StandardMaterial>>,
mut images: ResMut<Assets<Image>>,
) {
commands.spawn_bundle(PointLightBundle {
point_light: PointLight {
..Default::default()
},
transform: Transform::from_xyz(4.0, 8.0, 4.0),
..Default::default()
});
commands.spawn_bundle(PerspectiveCameraBundle {
transform: Transform::from_xyz(-2.0, 0.0, 5.0)
.looking_at(Vec3::new(0.0, 0.0, 0.0), Vec3::Y),
..Default::default()
});
commands.insert_resource(Iteration(0));
commands
.spawn_bundle(PbrBundle {
mesh: meshes.add(Mesh::from(shape::Quad::new(Vec2::new(3., 2.)))),
material: materials.add(StandardMaterial {
base_color_texture: Some(images.add(Image::new(
Extent3d {
width: 600,
height: 400,
depth_or_array_layers: 1,
},
TextureDimension::D2,
[0, 255, 0, 128].repeat(600 * 400), // GREEN
TextureFormat::Rgba8Unorm,
))),
..Default::default()
}),
..Default::default()
})
.insert(MyComponent);
}
fn changes(
mut materials: ResMut<Assets<StandardMaterial>>,
mut images: ResMut<Assets<Image>>,
mut iteration: ResMut<Iteration>,
webview_query: Query<&Handle<StandardMaterial>, With<MyComponent>>,
) {
if iteration.0 == 2 {
let material = materials.get_mut(webview_query.single()).unwrap();
let image = images
.get_mut(material.base_color_texture.as_ref().unwrap())
.unwrap();
image
.data
.copy_from_slice(&[255, 0, 0, 255].repeat(600 * 400));
}
iteration.0 += 1;
}
```
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Load skeletal weights and indices from GLTF files. Animate meshes.
## Solution
- Load skeletal weights and indices from GLTF files.
- Added `SkinnedMesh` component and ` SkinnedMeshInverseBindPose` asset
- Added `extract_skinned_meshes` to extract joint matrices.
- Added queue phase systems for enqueuing the buffer writes.
Some notes:
- This ports part of # #2359 to the current main.
- This generates new `BufferVec`s and bind groups every frame. The expectation here is that the number of `Query::get` calls during extract is probably going to be the stronger bottleneck, with up to 256 calls per skinned mesh. Until that is optimized, caching buffers and bind groups is probably a non-concern.
- Unfortunately, due to the uniform size requirements, this means a 16KB buffer is allocated for every skinned mesh every frame. There's probably a few ways to get around this, but most of them require either compute shaders or storage buffers, which are both incompatible with WebGL2.
Co-authored-by: james7132 <contact@jamessliu.com>
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
- Improve transform propagation performance
## Solution
- Use `Changed<Transform>` as part of the `root_query` and `transform_query` to avoid the indirection of having to look up the `Entity` in the `changed_transform_query`
- Get rid of the `changed_transform_query` entirely
- `transform_propagate_system` execution time for `many_cubes -- sphere` dropped from 1.07ms to 0.159ms, an 85% reduction for this system. Frame rate increased from ~42fps to ~44fps
# Objective
A common pattern in Rust is the [newtype](https://doc.rust-lang.org/rust-by-example/generics/new_types.html). This is an especially useful pattern in Bevy as it allows us to give common/foreign types different semantics (such as allowing it to implement `Component` or `FromWorld`) or to simply treat them as a "new type" (clever). For example, it allows us to wrap a common `Vec<String>` and do things like:
```rust
#[derive(Component)]
struct Items(Vec<String>);
fn give_sword(query: Query<&mut Items>) {
query.single_mut().0.push(String::from("Flaming Poisoning Raging Sword of Doom"));
}
```
> We could then define another struct that wraps `Vec<String>` without anything clashing in the query.
However, one of the worst parts of this pattern is the ugly `.0` we have to write in order to access the type we actually care about. This is why people often implement `Deref` and `DerefMut` in order to get around this.
Since it's such a common pattern, especially for Bevy, it makes sense to add a derive macro to automatically add those implementations.
## Solution
Added a derive macro for `Deref` and another for `DerefMut` (both exported into the prelude). This works on all structs (including tuple structs) as long as they only contain a single field:
```rust
#[derive(Deref)]
struct Foo(String);
#[derive(Deref, DerefMut)]
struct Bar {
name: String,
}
```
This allows us to then remove that pesky `.0`:
```rust
#[derive(Component, Deref, DerefMut)]
struct Items(Vec<String>);
fn give_sword(query: Query<&mut Items>) {
query.single_mut().push(String::from("Flaming Poisoning Raging Sword of Doom"));
}
```
### Alternatives
There are other alternatives to this such as by using the [`derive_more`](https://crates.io/crates/derive_more) crate. However, it doesn't seem like we need an entire crate just yet since we only need `Deref` and `DerefMut` (for now).
### Considerations
One thing to consider is that the Rust std library recommends _not_ using `Deref` and `DerefMut` for things like this: "`Deref` should only be implemented for smart pointers to avoid confusion" ([reference](https://doc.rust-lang.org/std/ops/trait.Deref.html)). Personally, I believe it makes sense to use it in the way described above, but others may disagree.
### Additional Context
Discord: https://discord.com/channels/691052431525675048/692572690833473578/956648422163746827 (controversiality discussed [here](https://discord.com/channels/691052431525675048/692572690833473578/956711911481835630))
---
## Changelog
- Add `Deref` derive macro (exported to prelude)
- Add `DerefMut` derive macro (exported to prelude)
- Updated most newtypes in examples to use one or both derives
Co-authored-by: MrGVSV <49806985+MrGVSV@users.noreply.github.com>
# Objective
Fixes#1529
Run bevy_ecs in miri
## Solution
- Don't set thread names when running in miri rust-lang/miri/issues/1717
- Update `event-listener` to `2.5.2` as previous versions have UB that is detected by miri: [event-listener commit](1fa31c553e)
- Ignore memory leaks when running in miri as they are impossible to track down rust-lang/miri/issues/1481
- Make `table_add_remove_many` test less "many" because miri is really quite slow :)
- Make CI run `RUSTFLAGS="-Zrandomize-layout" MIRIFLAGS="-Zmiri-ignore-leaks -Zmiri-tag-raw-pointers -Zmiri-disable-isolation" cargo +nightly miri test -p bevy_ecs`
* Refactor assign_lights_to_clusters to always clear + update clusters, even if the screen size isn't available yet / is zero. This fixes#4167. We still avoid the "expensive" per-light work when the screen size isn't available yet. I also consolidated some logic to eliminate some redundancies.
* Removed _a ton_ of (potentially very large) per-frame reallocations
* Removed `Res<VisiblePointLights>` (a vec) in favor of `Res<GlobalVisiblePointLights>` (a hashmap). We were allocating a new hashmap every frame, the collecting it into a vec every frame, then in another system _re-generating the hashmap_. It is always used like a hashmap, might as well embrace that. We now reuse the same hashmap every frame and dont use any intermediate collections.
* We were re-allocating Clusters aabb and light vectors every frame by re-constructing Clusters every frame. We now re-use the existing collections.
* Reuse per-camera VisiblePointLight vecs when possible instead of allocating them every frame. We now only insert VisiblePointLights if the component doesn't exist yet.
This adds the concept of "default labels" for systems (currently scoped to "parallel systems", but this could just as easily be implemented for "exclusive systems"). Function systems now include their function's `SystemTypeIdLabel` by default.
This enables the following patterns:
```rust
// ordering two systems without manually defining labels
app
.add_system(update_velocity)
.add_system(movement.after(update_velocity))
// ordering sets of systems without manually defining labels
app
.add_system(foo)
.add_system_set(
SystemSet::new()
.after(foo)
.with_system(bar)
.with_system(baz)
)
```
Fixes: #4219
Related to: #4220
Credit to @aevyrie @alice-i-cecile @DJMcNab (and probably others) for proposing (and supporting) this idea about a year ago. I was a big dummy that both shut down this (very good) idea and then forgot I did that. Sorry. You all were right!
# Objective
- Fixes#3970
- To support Bevy's shader abstraction(shader defs, shader imports and hot shader reloading) for compute shaders, I have followed carts advice and change the `PipelinenCache` to accommodate both compute and render pipelines.
## Solution
- renamed `RenderPipelineCache` to `PipelineCache`
- Cached Pipelines are now represented by an enum (render, compute)
- split the `SpecializedPipelines` into `SpecializedRenderPipelines` and `SpecializedComputePipelines`
- updated the game of life example
## Open Questions
- should `SpecializedRenderPipelines` and `SpecializedComputePipelines` be merged and how would we do that?
- should the `get_render_pipeline` and `get_compute_pipeline` methods be merged?
- is pipeline specialization for different entry points a good pattern
Co-authored-by: Kurt Kühnert <51823519+Ku95@users.noreply.github.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Add a helper for storage buffers similar to `UniformVec`
## Solution
- Add a `StorageBuffer<T, U>` where `T` is the main body of the shader struct without any final variable-sized array member, and `U` is the type of the items in a variable-sized array.
- Use `()` as the type for unwanted parts, e.g. `StorageBuffer<(), Vec4>::default()` would construct a binding that would work with `struct MyType { data: array<vec4<f32>>; }` in WGSL and `StorageBuffer<MyType, ()>::default()` would work with `struct MyType { ... }` in WGSL as long as there are no variable-sized arrays.
- Std430 requires that there is at most one variable-sized array in a storage buffer, that if there is one it is the last member of the binding, and that it has at least one item. `StorageBuffer` handles all of these constraints.
Add support for removing nodes, edges, and subgraphs. This enables live re-wiring of the render graph.
This was something I did to support the MSAA implementation, but it turned out to be unnecessary there. However, it is still useful so here it is in its own PR.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
make bevy ecs a lil bit less unsound
## Solution
yeet unsound API `World::components_mut`:
```rust
use bevy_ecs::prelude::*;
#[derive(Component)]
struct Foo(u8);
#[derive(Debug, Component)]
struct Bar([u8; 100]);
fn main() {
let mut world = World::new();
let e = world.spawn().insert(Foo(0)).id();
*world.components_mut() = Default::default();
let bar = world.entity_mut(e).remove::<Bar>().unwrap();
// oopsies reading memory copied from outside allocation
dbg!(bar);
}
```
# Objective
When loading a gltf scene with a camera, bevy will panic at ``thread 'main' panicked at 'scene contains the unregistered type `bevy_render:📷:bundle::Camera3d`. consider registering the type using `app.register_type::<T>()`', /home/jakob/dev/rust/contrib/bevy/bevy/crates/bevy_scene/src/scene_spawner.rs:332:35``.
## Solution
Register the camera types to fix the panic.
# Objective
As described in #4257, registering an Event twice would cause some systems to miss events on some starts, since the event buffer is cleared + swapped multiple times.
Fixes#4257
## Solution
A simple check whether the event is already registered is added, making adding an Event a second time a no-op.
# Objective
- Fixes#4208
## Solution
- Adds a check before inserting into an `Input`'s `just_released` set, in the same way that one exists for adding into the `just_pressed` set.
# Objective
The [glTF spec](8e798b02d2/specification/2.0/Specification.adoc (395-double-sided)) the `doubleSided` has the following to say about the `doubleSided` boolean:
> When this value is false, back-face culling is enabled, i.e., only front-facing triangles are rendered.
> When this value is true, back-face culling is disabled and double sided lighting is enabled. The back-face MUST have its normals reversed before the lighting equation is evaluated.
## Solution
Disable backface culling when `doubleSided: true`.
# Objective
- Make visible how much time is spent building the Opaque3d, AlphaMask3d, and Transparent3d passes
## Solution
- Add a `trace` feature to `bevy_core_pipeline`
- Add tracy spans around the three passes
- I didn't do this for shadows, sprites, etc as they are only one pass in the node. Perhaps it should be split into 3 nodes to allow insertion of other nodes between...?
# Objective
- Reduce time spent in the `check_visibility` system
## Solution
- Use `Vec3A` for all bounding volume types to leverage SIMD optimisations and to avoid repeated runtime conversions from `Vec3` to `Vec3A`
- Inline all bounding volume intersection methods
- Add on-the-fly calculated `Aabb` -> `Sphere` and do `Sphere`-`Frustum` intersection tests before `Aabb`-`Frustum` tests. This is faster for `many_cubes` but could be slower in other cases where the sphere test gives a false-positive that the `Aabb` test discards. Also, I tested precalculating the `Sphere`s and inserting them alongside the `Aabb` but this was slower.
- Do not test meshes against the far plane. Apparently games don't do this anymore with infinite projections, and it's one fewer plane to test against. I made it optional and still do the test for culling lights but that is up for discussion.
- These collectively reduce `check_visibility` execution time in `many_cubes -- sphere` from 2.76ms to 1.48ms and increase frame rate from ~42fps to ~44fps
Tracing added support for "inline span entering", which cuts down on a lot of complexity:
```rust
let span = info_span!("my_span").entered();
```
This adapts our code to use this pattern where possible, and updates our docs to recommend it.
This produces equivalent tracing behavior. Here is a side by side profile of "before" and "after" these changes.
# Objective
- Support compressed textures including 'universal' formats (ETC1S, UASTC) and transcoding of them to
- Support `.dds`, `.ktx2`, and `.basis` files
## Solution
- Fixes https://github.com/bevyengine/bevy/issues/3608 Look there for more details.
- Note that the functionality is all enabled through non-default features. If it is desirable to enable some by default, I can do that.
- The `basis-universal` crate, used for `.basis` file support and for transcoding, is built on bindings against a C++ library. It's not feasible to rewrite in Rust in a short amount of time. There are no Rust alternatives of which I am aware and it's specialised code. In its current state it doesn't support the wasm target, but I don't know for sure. However, it is possible to build the upstream C++ library with emscripten, so there is perhaps a way to add support for web too with some shenanigans.
- There's no support for transcoding from BasisLZ/ETC1S in KTX2 files as it was quite non-trivial to implement and didn't feel important given people could use `.basis` files for ETC1S.
# Objective
- Fixes#3300
- `RunSystem` is messy
## Solution
- Adds the trick theorised in https://github.com/bevyengine/bevy/issues/3300#issuecomment-991791234
P.S. I also want this for an experimental refactoring of `Assets`, to remove the duplication of `Events<AssetEvent<T>>`
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Hierarchy tools are not just used for `Transform`: they are also used for scenes.
- In the future there's interest in using them for other features, such as visiibility inheritance.
- The fact that these tools are found in `bevy_transform` causes a great deal of user and developer confusion
- Fixes#2758.
## Solution
- Split `bevy_transform` into two!
- Make everything work again.
Note that this is a very tightly scoped PR: I *know* there are code quality and docs issues that existed in bevy_transform that I've just moved around. We should fix those in a seperate PR and try to merge this ASAP to reduce the bitrot involved in splitting an entire crate.
## Frustrations
The API around `GlobalTransform` is a mess: we have massive code and docs duplication, no link between the two types and no clear way to extend this to other forms of inheritance.
In the medium-term, I feel pretty strongly that `GlobalTransform` should be replaced by something like `Inherited<Transform>`, which lives in `bevy_hierarchy`:
- avoids code duplication
- makes the inheritance pattern extensible
- links the types at the type-level
- allows us to remove all references to inheritance from `bevy_transform`, making it more useful as a standalone crate and cleaning up its docs
## Additional context
- double-blessed by @cart in https://github.com/bevyengine/bevy/issues/4141#issuecomment-1063592414 and https://github.com/bevyengine/bevy/issues/2758#issuecomment-913810963
- preparation for more advanced / cleaner hierarchy tools: go read https://github.com/bevyengine/rfcs/pull/53 !
- originally attempted by @finegeometer in #2789. It was a great idea, just needed more discussion!
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
**Problem**
- whenever you want more than one of the builtin cameras (for example multiple windows, split screen, portals), you need to add a render graph node that executes the correct sub graph, extract the camera into the render world and add the correct `RenderPhase<T>` components
- querying for the 3d camera is annoying because you need to compare the camera's name to e.g. `CameraPlugin::CAMERA_3d`
**Solution**
- Introduce the marker types `Camera3d`, `Camera2d` and `CameraUi`
-> `Query<&mut Transform, With<Camera3d>>` works
- `PerspectiveCameraBundle::new_3d()` and `PerspectiveCameraBundle::<Camera3d>::default()` contain the `Camera3d` marker
- `OrthographicCameraBundle::new_3d()` has `Camera3d`, `OrthographicCameraBundle::new_2d()` has `Camera2d`
- remove `ActiveCameras`, `ExtractedCameraNames`
- run 2d, 3d and ui passes for every camera of their respective marker
-> no custom setup for multiple windows example needed
**Open questions**
- do we need a replacement for `ActiveCameras`? What about a component `ActiveCamera { is_active: bool }` similar to `Visibility`?
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Make insertion of uniform components faster
## Solution
- Use batch insertion in the prepare_uniform_components system
- Improves `many_cubes -- sphere` from ~42fps to ~43fps
Co-authored-by: François <mockersf@gmail.com>
# Objective
fix cluster tilesize and tilecount calculations.
Fixes https://github.com/bevyengine/bevy/issues/4127 & https://github.com/bevyengine/bevy/issues/3596
## Solution
- calculate tilesize as smallest integers such that dimensions.xy() tiles will cover the screen
- calculate final dimensions as smallest integers such that final dimensions * tilesize will cover the screen
there is more cleanup that could be done in these functions. a future PR will likely remove the tilesize completely, so this is just a minimal change set to fix the current bug at small screen sizes
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Lets say we need to rotate stretched object for this purpose we can created stretched `Child` and add as child to `Parent`, later we can rotate `Parent`, `Child` in this situation should rotate keeping it form, it is not the case with `SpriteBundle` currently. If you try to do it with `SpriteBundle` it will deform.
## Solution
My pull request fixes order of transformations to scale -> rotate -> translate, with this fix `SpriteBundle` behaves as expected in described rotation, without deformation. Here is quote from "Essential Mathematics for Games":
> Generally, the desired order we wish to use for these transforms is to scale first, then rotate, then translate. Scaling first gives us the scaling along the axes we expect. We can then rotate around the origin of the frame, and then translate it into place.
I'm must say when I was using `MaterialMesh2dBundle` it behaves correctly in both cases with `bevy main` and with my fix, don't know why, was not able to figure it out why there is difference.
here is code I was using for testing:
```rust
use bevy::{
prelude::*,
render::render_resource::{Extent3d, TextureDimension, TextureFormat},
sprite::{MaterialMesh2dBundle, Mesh2dHandle},
};
fn main() {
let mut app = App::new();
app.insert_resource(ClearColor(Color::rgb(0.1, 0.2, 0.3)))
.add_plugins(DefaultPlugins)
.add_startup_system(setup);
app.run();
}
fn setup(
mut commands: Commands,
mut images: ResMut<Assets<Image>>,
mut meshes: ResMut<Assets<Mesh>>,
mut materials: ResMut<Assets<ColorMaterial>>,
) {
let mut c = OrthographicCameraBundle::new_2d();
c.orthographic_projection.scale = 1.0 / 10.0;
commands.spawn_bundle(c);
// note: mesh somehow works for both variants
// let quad: Mesh2dHandle = meshes.add(Mesh::from(shape::Quad::default())).into();
// let child = commands
// .spawn_bundle(MaterialMesh2dBundle {
// mesh: quad.clone(),
// transform: Transform::from_translation(Vec3::new(0.0, 0.0, -1.0))
// .with_scale(Vec3::new(10.0, 1.0, 1.0)),
// material: materials.add(ColorMaterial::from(Color::BLACK)),
// ..Default::default()
// })
// .id();
// commands
// .spawn_bundle(MaterialMesh2dBundle {
// mesh: quad,
// transform: Transform::from_rotation(Quat::from_rotation_z(0.78))
// .with_translation(Vec3::new(0.0, 0.0, 10.0)),
// material: materials.add(ColorMaterial::from(Color::WHITE)),
// ..Default::default()
// })
// .push_children(&[child]);
let white = images.add(get_image(Color::rgb(1.0, 1.0, 1.0)));
let black = images.add(get_image(Color::rgb(0.0, 0.0, 0.0)));
let child = commands
.spawn_bundle(SpriteBundle {
texture: black,
transform: Transform::from_translation(Vec3::new(0.0, 0.0, -1.0))
.with_scale(Vec3::new(10.0, 1.0, 1.0)),
..Default::default()
})
.id();
commands
.spawn_bundle(SpriteBundle {
texture: white,
transform: Transform::from_rotation(Quat::from_rotation_z(0.78))
.with_translation(Vec3::new(0.0, 0.0, 10.0)),
..Default::default()
})
.push_children(&[child]);
}
fn get_image(color: Color) -> Image {
let mut bytes = Vec::with_capacity((1 * 1 * 4 * 4) as usize);
let color = color.as_rgba_f32();
bytes.extend(color[0].to_le_bytes());
bytes.extend(color[1].to_le_bytes());
bytes.extend(color[2].to_le_bytes());
bytes.extend(1.0_f32.to_le_bytes());
Image::new(
Extent3d {
width: 1,
height: 1,
depth_or_array_layers: 1,
},
TextureDimension::D2,
bytes,
TextureFormat::Rgba32Float,
)
}
```
here is screenshot with `bevy main` and my fix:
# Objective
provide some customisation for default cluster setup
avoid "cluster index lists is full" in all cases (using a strategy outlined by @superdump)
## Solution
Add ClusterConfig enum (which can be inserted into a view at any time) to allow specifying cluster setup with variants:
- None (do not do any light assignment - for views which do not require light info, e.g. minimaps etc)
- Single (one cluster)
- XYZ (explicit cluster counts in each dimension)
- FixedZ (most similar to current - specify Z-slices and total, then x and y counts are dynamically determined to give approximately square clusters based on current aspect ratio)
Defaults to FixedZ { total: 4096, z: 24 } which is similar to the current setup.
Per frame, estimate the number of indices that would be required for the current config and decrease the cluster counts / increase the cluster sizes in the x and y dimensions if the index list would be too small.
notes:
- I didn't put ClusterConfig in the camera bundles to avoid introducing a dependency from bevy_render to bevy_pbr. the ClusterConfig enum comes with a pbr-centric impl block so i didn't want to move that into bevy_render either.
- ~Might want to add None variant to cluster config for views that don't care about lights?~
- Not well tested for orthographic
- ~there's a cluster_muck branch on my repo which includes some diagnostics / a modified lighting example which may be useful for tyre-kicking~ (outdated, i will bring it up to date if required)
anecdotal timings:
FPS on the lighting demo is negligibly better (~5%), maybe due to a small optimisation constraining the light aabb to be in front of the camera
FPS on the lighting demo with 100 extra lights added is ~33% faster, and also renders correctly as the cluster index count is no longer exceeded
# Objective
- Fix#2163
- Allow configuration of thread pools through `DefaultTaskPoolOptions`
## Solution
- `TaskPoolThreadAssignmentPolicy` was already public but not exported. Export it.
# Objective
Fixes#4133
## Solution
Add comparisons to make sure we don't dereference `Mut<>` in the two places where `Transform` is being mutated. `GlobalTransform` implementation already works properly so fixing Transform automatically fixed that as well.
## Objective
Currently, all directional and point lights have their viewing frusta recalculated every frame, even if they have not moved or been disabled/enabled.
## Solution
The relevant systems now make use of change detection to only update those lights whose viewing frusta may have changed.
# Objective
- Improve documentation.
- Provide helper functions for common uses of `Windows` relating to getting the primary `Window`.
- Reduce repeated `Window` code.
# Solution
- Adds infallible `primary()` and `primary_mut()` functions with standard error text. This replaces the commonly used `get_primary().unwrap()` seen throughout bevy which has inconsistent or nonexistent error messages.
- Adds `scale_factor(WindowId)` to replace repeated code blocks throughout.
# Considerations
- The added functions can panic if the primary window does not exist.
- It is very uncommon for the primary window to not exist, as seen by the regular use of `get_primary().unwrap()`. Most users will have a single window and will need to reference the primary window in their code multiple times.
- The panic provides a consistent error message to make this class of error easy to spot from the panic text.
- This follows the established standard of short names for infallible-but-unlikely-to-panic functions in bevy.
- Removes line noise for common usage of `Windows`.
# Objective
Fixes#3744
## Solution
The old code used the formula `normal . center + d + radius <= 0` to determine if the sphere with center `center` and radius `radius` is outside the plane with normal `normal` and distance from origin `d`. This only works if `normal` is normalized, which is not necessarily the case. Instead, `normal` and `d` are both multiplied by some factor that `radius` isn't multiplied by. So the additional code multiplied `radius` by that factor.
## Objective
A step towards `f64` `Transform`s (#1680). For now, I am rolling my own `Transform`. But in order to derive Reflect, I specifically need `DQuat` to be reflectable.
```rust
#[derive(Component, Reflect, Copy, Clone, PartialEq, Debug)]
#[reflect(Component, PartialEq)]
pub struct Transform {
pub translation: DVec3,
pub rotation: DQuat, // error: the trait `bevy::prelude::Reflect` is not implemented for `DQuat`
pub scale: DVec3,
}
```
## Solution
I have added a `DQuat` impl for `Reflect` alongside the other glam impls. I've also added impls for `DMat3` and `DMat4` to match.
# Objective
- Reduce power usage for games when not focused.
- Reduce power usage to ~0 when a desktop application is minimized (opt-in).
- Reduce power usage when focused, only updating on a `winit` event, or the user sends a redraw request. (opt-in)
https://user-images.githubusercontent.com/2632925/156904387-ec47d7de-7f06-4c6f-8aaf-1e952c1153a2.mp4
Note resource usage in the Task Manager in the above video.
## Solution
- Added a type `UpdateMode` that allows users to specify how the winit event loop is updated, without exposing winit types.
- Added two fields to `WinitConfig`, both with the `UpdateMode` type. One configures how the application updates when focused, and the other configures how the application behaves when it is not focused. Users can modify this resource manually to set the type of event loop control flow they want.
- For convenience, two functions were added to `WinitConfig`, that provide reasonable presets: `game()` (default) and `desktop_app()`.
- The `game()` preset, which is used by default, is unchanged from current behavior with one exception: when the app is out of focus the app updates at a minimum of 10fps, or every time a winit event is received. This has a huge positive impact on power use and responsiveness on my machine, which will otherwise continue running the app at many hundreds of fps when out of focus or minimized.
- The `desktop_app()` preset is fully reactive, only updating when user input (winit event) is supplied or a `RedrawRequest` event is sent. When the app is out of focus, it only updates on `Window` events - i.e. any winit event that directly interacts with the window. What this means in practice is that the app uses *zero* resources when minimized or not interacted with, but still updates fluidly when the app is out of focus and the user mouses over the application.
- Added a `RedrawRequest` event so users can force an update even if there are no events. This is useful in an application when you want to, say, run an animation even when the user isn't providing input.
- Added an example `low_power` to demonstrate these changes
## Usage
Configuring the event loop:
```rs
use bevy::winit::{WinitConfig};
// ...
.insert_resource(WinitConfig::desktop_app()) // preset
// or
.insert_resource(WinitConfig::game()) // preset
// or
.insert_resource(WinitConfig{ .. }) // manual
```
Requesting a redraw:
```rs
use bevy:🪟:RequestRedraw;
// ...
fn request_redraw(mut event: EventWriter<RequestRedraw>) {
event.send(RequestRedraw);
}
```
## Other details
- Because we have a single event loop for multiple windows, every time I've mentioned "focused" above, I more precisely mean, "if at least one bevy window is focused".
- Due to a platform bug in winit (https://github.com/rust-windowing/winit/issues/1619), we can't simply use `Window::request_redraw()`. As a workaround, this PR will temporarily set the window mode to `Poll` when a redraw is requested. This is then reset to the user's `WinitConfig` setting on the next frame.
# Objective
Currently, errors in the render graph runner are exposed via a `Result::unwrap()` panic message, which dumps the debug representation of the error.
## Solution
This PR updates `render_system` to log the chain of errors, followed by an explicit panic:
```
ERROR bevy_render::renderer: Error running render graph:
ERROR bevy_render::renderer: > encountered an error when running a sub-graph
ERROR bevy_render::renderer: > tried to pass inputs to sub-graph "outline_graph", which has no input slots
thread 'main' panicked at 'Error running render graph: encountered an error when running a sub-graph', /[redacted]/bevy/crates/bevy_render/src/renderer/mod.rs:44:9
```
Some errors' `Display` impls (via `thiserror`) have also been updated to provide more detail about the cause of the error.
# Objective
- `Assets<T>::iter_mut` sends `Modified` event for all assets first, then returns the iterator
- This means that events could be sent for assets that would not have been mutated if iteration was stopped before
## Solution
- Send `Modified` event when assets are iterated over.
Co-authored-by: François <8672791+mockersf@users.noreply.github.com>
This makes it possible for materials to configure front or
back face culling, or disable culling.
Initially I looked at specializing the Mesh which currently
controls this state but conceptually it seems more appropriate
to control this at the material level, not the mesh level.
_Just for reference this also seems to be consistent with Unity
where materials/shaders can configure the culling mode between
front/back/off - as opposed to configuring any culling state
when importing a mesh._
After some archaeology, trying to understand how this might
relate to the existing 'double_sided' option, it was determined
that double_sided is a more high level lighting option originally
from Filament that will cause the normals for back faces to be
flipped.
For sake of avoiding complexity, but keeping control this
currently keeps the options orthogonal, and adds some clarifying
documentation for `double_sided`. This won't affect any existing
apps since there hasn't been a way to disable backface culling
up until now, so the option was essentially redundant.
double_sided support could potentially be updated to imply
disabling of backface culling.
For reference https://github.com/bevyengine/bevy/pull/3734/commits also looks at exposing cull mode control. I think the main difference here is that this patch handles RenderPipelineDescriptor specialization directly within the StandardMaterial implementation instead of communicating info back to the Mesh via the `queue_material_meshes` system.
With the way material.rs builds up the final RenderPipelineDescriptor first by calling specialize for the MeshPipeline followed by specialize for the material then it seems like we have a natural place to override anything in the descriptor that's first configured for the mesh state.
# Objective
Add Visibility for lights
## Solution
- add Visibility to PointLightBundle and DirectionLightBundle
- filter lights used by Visibility.is_visible
note: includes changes from #3916 due to overlap, will be cleaner after that is merged
# Objective
When developing plugins, I very often come up to the need to have logging information printed out. The exact syntax is a bit cryptic, and takes some time to find the documentation.
Also a minor typo fix in `It has the same syntax as` part
## Solution
Adding a direct example in the module level information for both:
1. Enabling a specific level (`trace` in the example) for a module and all its subsystems at App init
2. Doing the same from console, when launching the application
Adds a `default()` shorthand for `Default::default()` ... because life is too short to constantly type `Default::default()`.
```rust
use bevy::prelude::*;
#[derive(Default)]
struct Foo {
bar: usize,
baz: usize,
}
// Normally you would do this:
let foo = Foo {
bar: 10,
..Default::default()
};
// But now you can do this:
let foo = Foo {
bar: 10,
..default()
};
```
The examples have been adapted to use `..default()`. I've left internal crates as-is for now because they don't pull in the bevy prelude, and the ergonomics of each case should be considered individually.
# Objective
fix#3915
## Solution
the issues are caused by
- lights are assigned to clusters before being filtered down to MAX_POINT_LIGHTS, leading to cluster counts potentially being too high
- after fixing the above, packing the count into 8 bits still causes overflow with exactly 256 lights affecting a cluster
to fix:
```assign_lights_to_clusters```
- limit extracted lights to MAX_POINT_LIGHTS, selecting based on shadow-caster & intensity (if required)
- warn if MAX_POINT_LIGHT count is exceeded
```prepare_lights```
- limit the lights assigned to a cluster to CLUSTER_COUNT_MASK (which is 1 less than MAX_POINT_LIGHTS) to avoid overflowing into the offset bits
notes:
- a better solution to the overflow may be to use more than 8 bits for cluster_count (the comment states only 14 of the remaining 24 bits are used for the offset). this would touch more of the code base but i'm happy to try if it has some benefit.
- intensity is only one way to select lights. it may be worth allowing user configuration of the light filtering, but i can't see a clean way to do that
# Objective
- Add ways to control how audio is played
## Solution
- playing a sound will return a (weak) handle to an asset that can be used to control playback
- if the asset is dropped, it will detach the sink (same behaviour as now)
# Objective
- Help debug panics
## Solution
- Insert a custom panic hook when trace is enabled that will log spans
example when running a command on a despawned entity
before:
```
thread 'main' panicked at 'Could not add a component (of type `panic::Marker`) to entity 1v0 because it doesn't exist in this World.
If this command was added to a newly spawned entity, ensure that you have not despawned that entity within the same stage.
This may have occurred due to system order ambiguity, or if the spawning system has multiple command buffers', /bevy/crates/bevy_ecs/src/system/commands/mod.rs:664:13
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
after:
```
0: bevy_ecs::schedule::stage::system_commands
with name="panic::my_bad_system"
at crates/bevy_ecs/src/schedule/stage.rs:871
1: bevy_ecs::schedule::stage
with name=Update
at crates/bevy_ecs/src/schedule/mod.rs:340
2: bevy_app::app::frame
at crates/bevy_app/src/app.rs:111
3: bevy_app::app::bevy_app
at crates/bevy_app/src/app.rs:126
thread 'main' panicked at 'Could not add a component (of type `panic::Marker`) to entity 1v0 because it doesn't exist in this World.
If this command was added to a newly spawned entity, ensure that you have not despawned that entity within the same stage.
This may have occurred due to system order ambiguity, or if the spawning system has multiple command buffers', /bevy/crates/bevy_ecs/src/system/commands/mod.rs:664:13
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
# Objective
- Optimize assign_lights_to_clusters
## Solution
- Avoid inserting entities into hash sets in inner loops when it is known they will be inserted in at least one iteration of the loop.
- Use a Vec instead of a hash set where the set is not needed
- Avoid explicit calculation of the cluster_index from x,y,z coordinates, instead using row and column offsets and just adding z in the inner loop
- These changes cut the time spent in the system roughly in half
# Objective
- Currently there is now way of making an indirect draw call from a tracked render pass.
- This is a very useful feature for GPU based rendering.
## Solution
- Expose the `draw_indirect` and `draw_indexed_indirect` methods from the wgpu `RenderPass` in the `TrackedRenderPass`.
## Alternative
- #3595: Expose the underlying `RenderPass` directly
# Objective
- In the large majority of cases, users were calling `.unwrap()` immediately after `.get_resource`.
- Attempting to add more helpful error messages here resulted in endless manual boilerplate (see #3899 and the linked PRs).
## Solution
- Add an infallible variant named `.resource` and so on.
- Use these infallible variants over `.get_resource().unwrap()` across the code base.
## Notes
I did not provide equivalent methods on `WorldCell`, in favor of removing it entirely in #3939.
## Migration Guide
Infallible variants of `.get_resource` have been added that implicitly panic, rather than needing to be unwrapped.
Replace `world.get_resource::<Foo>().unwrap()` with `world.resource::<Foo>()`.
## Impact
- `.unwrap` search results before: 1084
- `.unwrap` search results after: 942
- internal `unwrap_or_else` calls added: 4
- trivial unwrap calls removed from tests and code: 146
- uses of the new `try_get_resource` API: 11
- percentage of the time the unwrapping API was used internally: 93%
# Objective
Continuation of #2663 due to git problems - better documentation for Query::par_for_each and par_for_each_mut
## Solution
Going into more detail about the function parameters
# Objective
The `#[reflect_trait]` macro did not maintain the visibility of its trait. It also did not make its accessor methods public, which made them inaccessible outside the current module.
## Solution
Made the `Reflect***` struct match the visibility of its trait and made both the `get` and `get_mut` methods always public.
# Objective
- Fix the ugliness of the `config` api.
- Supercedes #2440, #2463, #2491
## Solution
- Since #2398, capturing closure systems have worked.
- Use those instead where we needed config before
- Remove the rest of the config api.
- Related: #2777
# Objective
`Vec3A` is does not implement `Reflect`. This is generally useful for `Reflect` derives using `Vec3A` fields, and may speed up some animation blending use cases.
## Solution
Extend the existing macro uses to include `Vec3A`.
# Objective
- Fixes#4010, as well as any similar issues in this class.
- Winit functions used outside of the main thread can cause the application to unexpectedly hang.
## Solution
- Make the `WinitWindows` resource `!Send`.
- This ensures that any systems that use `WinitWindows` must either be exclusive (run on the main thread), or the resource is explicitly marked with the `NonSend` parameter in user systems.
# Objective
Will fix#3377 and #3254
## Solution
Use an enum to represent either a `WindowId` or `Handle<Image>` in place of `Camera::window`.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Closes#786
- Closes#2252
- Closes#2588
This PR implements a derive macro that allows users to define their queries as structs with named fields.
## Example
```rust
#[derive(WorldQuery)]
#[world_query(derive(Debug))]
struct NumQuery<'w, T: Component, P: Component> {
entity: Entity,
u: UNumQuery<'w>,
generic: GenericQuery<'w, T, P>,
}
#[derive(WorldQuery)]
#[world_query(derive(Debug))]
struct UNumQuery<'w> {
u_16: &'w u16,
u_32_opt: Option<&'w u32>,
}
#[derive(WorldQuery)]
#[world_query(derive(Debug))]
struct GenericQuery<'w, T: Component, P: Component> {
generic: (&'w T, &'w P),
}
#[derive(WorldQuery)]
#[world_query(filter)]
struct NumQueryFilter<T: Component, P: Component> {
_u_16: With<u16>,
_u_32: With<u32>,
_or: Or<(With<i16>, Changed<u16>, Added<u32>)>,
_generic_tuple: (With<T>, With<P>),
_without: Without<Option<u16>>,
_tp: PhantomData<(T, P)>,
}
fn print_nums_readonly(query: Query<NumQuery<u64, i64>, NumQueryFilter<u64, i64>>) {
for num in query.iter() {
println!("{:#?}", num);
}
}
#[derive(WorldQuery)]
#[world_query(mutable, derive(Debug))]
struct MutNumQuery<'w, T: Component, P: Component> {
i_16: &'w mut i16,
i_32_opt: Option<&'w mut i32>,
}
fn print_nums(mut query: Query<MutNumQuery, NumQueryFilter<u64, i64>>) {
for num in query.iter_mut() {
println!("{:#?}", num);
}
}
```
## TODOs:
- [x] Add support for `&T` and `&mut T`
- [x] Test
- [x] Add support for optional types
- [x] Test
- [x] Add support for `Entity`
- [x] Test
- [x] Add support for nested `WorldQuery`
- [x] Test
- [x] Add support for tuples
- [x] Test
- [x] Add support for generics
- [x] Test
- [x] Add support for query filters
- [x] Test
- [x] Add support for `PhantomData`
- [x] Test
- [x] Refactor `read_world_query_field_type_info`
- [x] Properly document `readonly` attribute for nested queries and the static assertions that guarantee safety
- [x] Test that we never implement `ReadOnlyFetch` for types that need mutable access
- [x] Test that we insert static assertions for nested `WorldQuery` that a user marked as readonly
This PR makes a number of changes to how meshes and vertex attributes are handled, which the goal of enabling easy and flexible custom vertex attributes:
* Reworks the `Mesh` type to use the newly added `VertexAttribute` internally
* `VertexAttribute` defines the name, a unique `VertexAttributeId`, and a `VertexFormat`
* `VertexAttributeId` is used to produce consistent sort orders for vertex buffer generation, replacing the more expensive and often surprising "name based sorting"
* Meshes can be used to generate a `MeshVertexBufferLayout`, which defines the layout of the gpu buffer produced by the mesh. `MeshVertexBufferLayouts` can then be used to generate actual `VertexBufferLayouts` according to the requirements of a specific pipeline. This decoupling of "mesh layout" vs "pipeline vertex buffer layout" is what enables custom attributes. We don't need to standardize _mesh layouts_ or contort meshes to meet the needs of a specific pipeline. As long as the mesh has what the pipeline needs, it will work transparently.
* Mesh-based pipelines now specialize on `&MeshVertexBufferLayout` via the new `SpecializedMeshPipeline` trait (which behaves like `SpecializedPipeline`, but adds `&MeshVertexBufferLayout`). The integrity of the pipeline cache is maintained because the `MeshVertexBufferLayout` is treated as part of the key (which is fully abstracted from implementers of the trait ... no need to add any additional info to the specialization key).
* Hashing `MeshVertexBufferLayout` is too expensive to do for every entity, every frame. To make this scalable, I added a generalized "pre-hashing" solution to `bevy_utils`: `Hashed<T>` keys and `PreHashMap<K, V>` (which uses `Hashed<T>` internally) . Why didn't I just do the quick and dirty in-place "pre-compute hash and use that u64 as a key in a hashmap" that we've done in the past? Because its wrong! Hashes by themselves aren't enough because two different values can produce the same hash. Re-hashing a hash is even worse! I decided to build a generalized solution because this pattern has come up in the past and we've chosen to do the wrong thing. Now we can do the right thing! This did unfortunately require pulling in `hashbrown` and using that in `bevy_utils`, because avoiding re-hashes requires the `raw_entry_mut` api, which isn't stabilized yet (and may never be ... `entry_ref` has favor now, but also isn't available yet). If std's HashMap ever provides the tools we need, we can move back to that. Note that adding `hashbrown` doesn't increase our dependency count because it was already in our tree. I will probably break these changes out into their own PR.
* Specializing on `MeshVertexBufferLayout` has one non-obvious behavior: it can produce identical pipelines for two different MeshVertexBufferLayouts. To optimize the number of active pipelines / reduce re-binds while drawing, I de-duplicate pipelines post-specialization using the final `VertexBufferLayout` as the key. For example, consider a pipeline that needs the layout `(position, normal)` and is specialized using two meshes: `(position, normal, uv)` and `(position, normal, other_vec2)`. If both of these meshes result in `(position, normal)` specializations, we can use the same pipeline! Now we do. Cool!
To briefly illustrate, this is what the relevant section of `MeshPipeline`'s specialization code looks like now:
```rust
impl SpecializedMeshPipeline for MeshPipeline {
type Key = MeshPipelineKey;
fn specialize(
&self,
key: Self::Key,
layout: &MeshVertexBufferLayout,
) -> RenderPipelineDescriptor {
let mut vertex_attributes = vec![
Mesh::ATTRIBUTE_POSITION.at_shader_location(0),
Mesh::ATTRIBUTE_NORMAL.at_shader_location(1),
Mesh::ATTRIBUTE_UV_0.at_shader_location(2),
];
let mut shader_defs = Vec::new();
if layout.contains(Mesh::ATTRIBUTE_TANGENT) {
shader_defs.push(String::from("VERTEX_TANGENTS"));
vertex_attributes.push(Mesh::ATTRIBUTE_TANGENT.at_shader_location(3));
}
let vertex_buffer_layout = layout
.get_layout(&vertex_attributes)
.expect("Mesh is missing a vertex attribute");
```
Notice that this is _much_ simpler than it was before. And now any mesh with any layout can be used with this pipeline, provided it has vertex postions, normals, and uvs. We even got to remove `HAS_TANGENTS` from MeshPipelineKey and `has_tangents` from `GpuMesh`, because that information is redundant with `MeshVertexBufferLayout`.
This is still a draft because I still need to:
* Add more docs
* Experiment with adding error handling to mesh pipeline specialization (which would print errors at runtime when a mesh is missing a vertex attribute required by a pipeline). If it doesn't tank perf, we'll keep it.
* Consider breaking out the PreHash / hashbrown changes into a separate PR.
* Add an example illustrating this change
* Verify that the "mesh-specialized pipeline de-duplication code" works properly
Please dont yell at me for not doing these things yet :) Just trying to get this in peoples' hands asap.
Alternative to #3120Fixes#3030
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
`all_tuples` panics when the start count is set to anything other than 0 or 1. Fix this bug.
## Solution
Originally part of #2381, this PR fixes the slice indexing used by the proc macro.
# Objective
- Fixes#4005
## Solution
- Include the `near` and `far` clipping values from the perspective projection in the `Camera` struct; before that, they were both being defaulted to 0.
# Context
I wanted to add a `texture` to my `ColorMaterial` without explicitly adding a `color`. To do this I used `..Default::default()` which in turn gave me unexpected results. I was expecting that my texture would render without any color modifications, but to my surprise it got rendered in a purple tint (`Color::rgb(1.0, 0.0, 1.0)`). To fix this I had to explicitly define the `color` using `color: Color::WHITE`.
## What I wanted to use
```rust
commands
.spawn_bundle(MaterialMesh2dBundle {
mesh: mesh_handle.clone().into(),
transform: Transform::default().with_scale(Vec3::splat(8.)),
material: materials.add(ColorMaterial {
texture: Some(texture_handle.clone()),
..Default::default() // here
}),
..Default::default()
})
```
## What I had to use instead
```rust
commands
.spawn_bundle(MaterialMesh2dBundle {
mesh: mesh_handle.clone().into(),
transform: Transform::default().with_scale(Vec3::splat(8.)),
material: materials.add(ColorMaterial {
texture: Some(texture_handle.clone()),
color: Color::WHITE, // here
}),
..Default::default()
})
```
Adds "hot reloading" of internal assets, which is normally not possible because they are loaded using `include_str` / direct Asset collection access.
This is accomplished via the following:
* Add a new `debug_asset_server` feature flag
* When that feature flag is enabled, create a second App with a second AssetServer that points to a configured location (by default the `crates` folder). Plugins that want to add hot reloading support for their assets can call the new `app.add_debug_asset::<T>()` and `app.init_debug_asset_loader::<T>()` functions.
* Load "internal" assets using the new `load_internal_asset` macro. By default this is identical to the current "include_str + register in asset collection" approach. But if the `debug_asset_server` feature flag is enabled, it will also load the asset dynamically in the debug asset server using the file path. It will then set up a correlation between the "debug asset" and the "actual asset" by listening for asset change events.
This is an alternative to #3673. The goal was to keep the boilerplate and features flags to a minimum for bevy plugin authors, and allow them to home their shaders near relevant code.
This is a draft because I haven't done _any_ quality control on this yet. I'll probably rename things and remove a bunch of unwraps. I just got it working and wanted to use it to start a conversation.
Fixes#3660
This enables shaders to (optionally) define their import path inside their source. This has a number of benefits:
1. enables users to define their own custom paths directly in their assets
2. moves the import path "close" to the asset instead of centralized in the plugin definition, which seems "better" to me.
3. makes "internal hot shader reloading" way more reasonable (see #3966)
4. logically opens the door to importing "parts" of a shader by defining "import_path blocks".
```rust
#define_import_path bevy_pbr::mesh_struct
struct Mesh {
model: mat4x4<f32>;
inverse_transpose_model: mat4x4<f32>;
// 'flags' is a bit field indicating various options. u32 is 32 bits so we have up to 32 options.
flags: u32;
};
let MESH_FLAGS_SHADOW_RECEIVER_BIT: u32 = 1u;
```
For some keys, it is too expensive to hash them on every lookup. Historically in Bevy, we have regrettably done the "wrong" thing in these cases (pre-computing hashes, then re-hashing them) because Rust's built in hashed collections don't give us the tools we need to do otherwise. Doing this is "wrong" because two different values can result in the same hash. Hashed collections generally get around this by falling back to equality checks on hash collisions. You can't do that if the key _is_ the hash. Additionally, re-hashing a hash increase the odds of collision!
#3959 needs pre-hashing to be viable, so I decided to finally properly solve the problem. The solution involves two different changes:
1. A new generalized "pre-hashing" solution in bevy_utils: `Hashed<T>` types, which store a value alongside a pre-computed hash. And `PreHashMap<K, V>` (which uses `Hashed<T>` internally) . `PreHashMap` is just an alias for a normal HashMap that uses `Hashed<T>` as the key and a new `PassHash` implementation as the Hasher.
2. Replacing the `std::collections` re-exports in `bevy_utils` with equivalent `hashbrown` impls. Avoiding re-hashes requires the `raw_entry_mut` api, which isn't stabilized yet (and may never be ... `entry_ref` has favor now, but also isn't available yet). If std's HashMap ever provides the tools we need, we can move back to that. The latest version of `hashbrown` adds support for the `entity_ref` api, so we can move to that in preparation for an std migration, if thats the direction they seem to be going in. Note that adding hashbrown doesn't increase our dependency count because it was already in our tree.
In addition to providing these core tools, I also ported the "table identity hashing" in `bevy_ecs` to `raw_entry_mut`, which was a particularly egregious case.
The biggest outstanding case is `AssetPathId`, which stores a pre-hash. We need AssetPathId to be cheaply clone-able (and ideally Copy), but `Hashed<AssetPath>` requires ownership of the AssetPath, which makes cloning ids way more expensive. We could consider doing `Hashed<Arc<AssetPath>>`, but cloning an arc is still a non-trivial expensive that needs to be considered. I would like to handle this in a separate PR. And given that we will be re-evaluating the Bevy Assets implementation in the very near future, I'd prefer to hold off until after that conversation is concluded.
# Objective
- `WgpuOptions` is mutated to be updated with the actual device limits and features, but this information is readily available to both the main and render worlds through the `RenderDevice` which has .limits() and .features() methods
- Information about the adapter in terms of its name, the backend in use, etc were not being exposed but have clear use cases for being used to take decisions about what rendering code to use. For example, if something works well on AMD GPUs but poorly on Intel GPUs. Or perhaps something works well in Vulkan but poorly in DX12.
## Solution
- Stop mutating `WgpuOptions `and don't insert the updated values into the main and render worlds
- Return `AdapterInfo` from `initialize_renderer` and insert it into the main and render worlds
- Use `RenderDevice` limits in the lighting code that was using `WgpuOptions.limits`.
- Renamed `WgpuOptions` to `WgpuSettings`
# Objective
- `SystemStates` rock for dealing with exclusive world access, but are hard to figure out how to use.
- Fixes#3341.
## Solution
- Clearly document how to use `SystemState`, and why they're useful as an end-user.
What is says on the tin.
This has got more to do with making `clippy` slightly more *quiet* than it does with changing anything that might greatly impact readability or performance.
that said, deriving `Default` for a couple of structs is a nice easy win
# Objective
- Support overriding wgpu features and limits that were calculated from default values or queried from the adapter/backend.
- Fixes#3686
## Solution
- Add `disabled_features: Option<wgpu::Features>` to `WgpuOptions`
- Add `constrained_limits: Option<wgpu::Limits>` to `WgpuOptions`
- After maybe obtaining updated features and limits from the adapter/backend in the case of `WgpuOptionsPriority::Functionality`, enable the `WgpuOptions` `features`, disable the `disabled_features`, and constrain the `limits` by `constrained_limits`.
- Note that constraining the limits means for `wgpu::Limits` members named `max_.*` we take the minimum of that which was configured/queried for the backend/adapter and the specified constrained limit value. This means the configured/queried value is used if the constrained limit is larger as that is as much as the device/API supports, or the constrained limit value is used if it is smaller as we are imposing an artificial constraint. For members named `min_.*` we take the maximum instead. For example, a minimum stride might be 256 but we set constrained limit value of 1024, then 1024 is the more conservative value. If the constrained limit value were 16, then 256 would be the more conservative.
On platforms like wasm (on mobile) the cursor can disappear suddenly (ex: the user releases their finger from the screen). This causes the undesirable behavior in #3752. These changes make the UI handler properly handle this case.
Fixes#3752
Alternative to #3599
# Objective
If a user attempts to `.add_render_command::<P, C>()` on a world that does not contain `DrawFunctions<P>`, the engine panics with a generic `Option::unwrap` message:
```
thread 'main' panicked at 'called `Option::unwrap()` on a `None` value', /[redacted]/bevy/crates/bevy_render/src/render_phase/draw.rs:318:76
```
## Solution
This PR adds a panic message describing the problem:
```
thread 'main' panicked at 'DrawFunctions<outline::MeshStencil> must be added to the world as a resource before adding render commands to it', /[redacted]/bevy/crates/bevy_render/src/render_phase/draw.rs:322:17
```
# Objective
The documentation was unclear but it seemed like it was intended to _only_ flip the texture coordinates of the quad. However, it was also swapping the vertex positions, which resulted in inverted winding order so the front became a back face, and the normal was pointing into the face instead of out of it.
## Solution
- This change makes the only difference the UVs being horizontally flipped.
# Objective
Fix `SetSpriteTextureBindGroup` to use index instead of hard coded 1.
Fixes#3895
## Solution
1 -> I
Co-authored-by: devjobe <git@devjobe.com>
# Objective
- Fixes#3078
- Fixes#1397
## Solution
- Implement Commands::init_resource.
- Also implement for World, for consistency and to simplify internal structure.
- While we're here, clean up some of the docs for Command and World resource modification.
(cherry picked from commit de943381bd2a8b242c94db99e6c7bbd70006d7c3)
# Objective
The view uniform lacks view transform information. The inverse transform is currently provided but this is not sufficient if you do not have access to an `inverse` function (such as in WGSL).
## Solution
Grab the view transform, put it in the view uniform, use the same matrix to compute the inverse as well.
# Objective
When I use the latest winit with bevy main, I got this error.
```
error[E0308]: mismatched types
--> /Users/ryo/.cargo/git/checkouts/bevy-f7ffde730c324c74/b13f238/crates/bevy_winit/src/lib.rs:191:5
|
191 | event_loop.run_return(event_handler)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ expected `()`, found `i32`
|
help: consider using a semicolon here
|
191 | event_loop.run_return(event_handler);
| +
help: try adding a return type
|
187 | -> i32 where
| ++++++
```
In [this commit](a52f755ce8), the signature of `run_return` was changed in winit.
## Solution
This tiny PR does not add support for exit code, but makes compilation successful.
# Objective
- `CoreStage::Startup` is unique in the `CoreStage` enum, in that it represents a `Schedule` and not a `SystemStage`.
- This can lead to confusion about how `CoreStage::Startup` and the `StartupStage` enum are related.
- Beginners sometimes try `.add_system_to_stage(CoreStage::Startup, setup.system())` instead of `.add_startup_system(setup.system())`, which causes a Panic:
```
thread 'main' panicked at 'Stage 'Startup' does not exist or is not a SystemStage', crates\bevy_ecs\src\schedule\mod.rs:153:13
stack backtrace:
0: std::panicking::begin_panic_handler
at /rustc/53cb7b09b00cbea8754ffb78e7e3cb521cb8af4b\/library\std\src\panicking.rs:493
1: std::panicking::begin_panic_fmt
at /rustc/53cb7b09b00cbea8754ffb78e7e3cb521cb8af4b\/library\std\src\panicking.rs:435
2: bevy_ecs::schedule::{{impl}}::add_system_to_stage::stage_not_found
at .\crates\bevy_ecs\src\schedule\mod.rs:153
3: bevy_ecs::schedule::{{impl}}::add_system_to_stage::{{closure}}<tuple<bevy_ecs::system::function_system::IsFunctionSystem, tuple<bevy_ecs::system::commands::Commands, bevy_ecs::change_detection::ResMut<bevy_asset::assets::Assets<bevy_render::mesh::mesh::Me
at .\crates\bevy_ecs\src\schedule\mod.rs:161
4: core::option::Option<mut bevy_ecs::schedule::stage::SystemStage*>::unwrap_or_else<mut bevy_ecs::schedule::stage::SystemStage*,closure-0>
at C:\Users\scher\.rustup\toolchains\stable-x86_64-pc-windows-msvc\lib\rustlib\src\rust\library\core\src\option.rs:427
5: bevy_ecs::schedule::Schedule::add_system_to_stage<tuple<bevy_ecs::system::function_system::IsFunctionSystem, tuple<bevy_ecs::system::commands::Commands, bevy_ecs::change_detection::ResMut<bevy_asset::assets::Assets<bevy_render::mesh::mesh::Mesh>>, bevy_ec
at .\crates\bevy_ecs\src\schedule\mod.rs:159
6: bevy_app::app_builder::AppBuilder::add_system_to_stage<tuple<bevy_ecs::system::function_system::IsFunctionSystem, tuple<bevy_ecs::system::commands::Commands, bevy_ecs::change_detection::ResMut<bevy_asset::assets::Assets<bevy_render::mesh::mesh::Mesh>>, be
at .\crates\bevy_app\src\app_builder.rs:196
7: 3d_scene::main
at .\examples\3d\3d_scene.rs:4
8: core::ops::function::FnOnce::call_once<fn(),tuple<>>
at C:\Users\scher\.rustup\toolchains\stable-x86_64-pc-windows-msvc\lib\rustlib\src\rust\library\core\src\ops\function.rs:227
```
## Solution
- Replace the `CoreStage::Startup` Label with the new `StartupSchedule` unit type.
Resolves#2229
# Objective
The docs for `{VertexState, FragmentState}::entry_point` stipulate that the entry point function in the shader must return void. This seems to be specific to GLSL; WGSL has no `void` type and its entry point functions return values that describe their output.
## Solution
Remove the mention of the `void` return type.
# Objective
- Currently, when getting a diagnostic value, the oldest value is returned. This is not the best for a diagnostic with a large history, as you could get a value from several frames away
## Solution
- I changed the order in which the history is used to follow ["The “default” usage of this type as a queue is to use push_back to add to the queue, and pop_front to remove from the queue."](https://doc.rust-lang.org/std/collections/vec_deque/struct.VecDeque.html)
# Objective
- `serde_json` assumes that numbers being deserialized are either u64 or i64.
- `Entity` serializes and deserializes as a u32.
- Deserializing an `Entity` with `serde_json` fails with: `Error("invalid type: integer 10947, expected expected Entity"`
## Solution
- Implemented a visitor for u64 that allows an `Entity` to be deserialized in this case.
- While I was here, also fixed the redundant "expected expected Entity" in the error message
- Tested the change in a local project which now correctly deserializes `Entity` structs with `serde_json` when it couldn't before
# Objective
- Fix#3559
- Avoid erasing existing resource `Assets<T>` when adding it twice
## Solution
- Before creating a new `Assets<T>`, check if it has already been added to the world
Co-authored-by: François <8672791+mockersf@users.noreply.github.com>
Co-authored-by: Aevyrie Roessler <aevyrie@gmail.com>
# Objective
- Bevy currently has no simple way to make an "empty" Entity work correctly in a Hierachy.
- The current Solution is to insert a Tuple instead:
```rs
.insert_bundle((Transform::default(), GlobalTransform::default()))
```
## Solution
* Add a `TransformBundle` that combines the Components:
```rs
.insert_bundle(TransformBundle::default())
```
* The code is based on #2331, except for missing the more controversial usage of `TransformBundle` as a Sub-bundle in preexisting Bundles.
Co-authored-by: MinerSebas <66798382+MinerSebas@users.noreply.github.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Implements a new Queryable called AnyOf, which will return an item as long as at least one of it's requested Queryables returns something. For example, a `Query<AnyOf<(&A, &B, &C)>>` will return items with type `(Option<&A>, Option<&B>, Option<&C>)`, and will guarantee that for every element at least one of the option s is Some. This is a shorthand for queries like `Query<(Option<&A>, Option<&B>, Option<&C>), Or<(With<A>, With<B>, With&C>)>>`.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Enable the user to specify any presentation modes (including `Mailbox`).
Fixes#3807
## Solution
I've added a new `PresentMode` enum in `bevy_window` that mirrors the `wgpu` enum 1:1. Alternatively, I could add a new dependency on `wgpu-types` if that would be preferred.
## Objective
When print shader validation error messages, we didn't print the sources and error message text, which led to some confusing error messages.
```cs
error:
┌─ wgsl:15:11
│
15 │ return material.color + 1u;
│ ^^^^^^^^^^^^^^^^^^^^ naga::Expression [11]
```
## Solution
New error message:
```cs
error: Entry point fragment at Vertex is invalid
┌─ wgsl:15:11
│
15 │ return material.color + 1u;
│ ^^^^^^^^^^^^^^^^^^^^ naga::Expression [11]
│
= Expression [11] is invalid
= Operation Add can't work with [8] and [10]
```
# Objective
Add a simple way for user to get the size of a loaded texture in an Image object.
Aims to solve #3689
## Solution
Add a `size() -> Vec2` method
Add two simple tests for this method.
Updates:
. method named changed from `size_2d` to `size`
# Objective
- `asset_server.watch_for_changes().unwrap()` only watches changes for assets loaded **_after_** that call.
- Technically, the `hot_asset_reloading` example is racey as the watch on the asset path is set up in an async task scheduled from the asset `load()`, but the filesystem watcher is only constructed in a call that comes **_after_** the call to `load()`.
## Solution
- It feels safest to allow enabling watching the filesystem for changes on the asset server from the point of its construction. Therefore, adding such an option to `AssetServerSettings` seemed to be the correct solution.
- Fix `hot_asset_reloading` by inserting the `AssetServerSettings` resource with `watch_for_changes: true` instead of calling `asset_server.watch_for_changes().unwrap()`.
- Document the shortcomings of `.watch_for_changes()`
# Objective
The query for `VisiblePointLights` in `check_light_mesh_visibility` has a `Without<DirectionalLight>` filter. However, because `VisiblePointLights` is no longer an alias for `VisibleEntities`, the query won't conflict with the query for `DirectionalLight`s and thus the filter is unnecessary.
## Solution
Remove the filter and the outdated comment explaining its purpose.
# Objective
- Provide impls for mutable types to relevant immutable types.
- Closes#2005
## Solution
- impl From<ResMut> for Res
- impl From<NonSendMut> for NonSend
- Mut to &/&mut already impl'd in change_detection_impl! macro
# Objective
- `Name` component is missing some useful trait impls.
## Solution
- Implement the missing traits. `Display`, `AsRef<str>`, and several other conversions to and from strings.
# Objective
It would be useful to be able to restart a state (such as if an operation fails and needs to be retried from `on_enter`). Currently, it seems the way to restart a state is to transition to a dummy state and then transition back.
## Solution
The solution is to add a `restart` method on `State<T>` that allows for transitioning to the already-active state.
## Context
Based on [this](https://discord.com/channels/691052431525675048/742884593551802431/920335041756815441) question from the Discord.
Closes#2385
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- As part of exploring input event suppression in bevy_egui here: 53c1773583
- I found that the only way to suppress events properly, is to allow to clone the relevant Input<Whatever>, and update with events manually from within the system. This cloned Input then is discarded, the Events<*> structs are cleared, and bevy_input's normal update of Input proceeds, without the events that have been suppressed.
## Solution
- This enables Input to be cloned, allowing it to be manually updated with events.
Implements the changes cart decided on in https://github.com/bevyengine/bevy/pull/3404#issuecomment-999806086
> - The default title should be changed to app so we don't leak the "bevy context" by default. app is generic enough that most people building real games will probably want to change it, but also generic enough that if someone doesn't manually set it, users won't bat an eye. I prefer this to binary names because they won't be consistent on all platforms / setups. A user (or developer) renaming a binary would implicitly rename the window title, which feels odd to me.
> - No debug info in the title by default. An opt in plugin for that would be nice though.
closes#3404 ?
# Objective
Fixes#3250
## Solution
Since this panic occurs in bevy_ecs, and StartupStage is part of
bevy_app, we really only have access to the Debug string of the
`stage_label` parameter. This led me to the hacky solution of
comparing the debug output of the label the user provides with the known
variants of StartupStage.
An alternative would be to do this error handling further up in
bevy_app, where we can access StartupStage's typeid, but I don't think
it is worth having a panic in 2 places (_ecs, and _app).
# Objective
- Missing obvious way to rotate a transform around a point. This is popularly used for rotation of an object in world space ("orbiting" a point), or for local rotation of an object around a pivot point on that object.
- Present in other (not to be named) game engines
- Was question from user on Discord today (thread "object rotation")
## Solution
- Added Transform::rotate_around method where point is specified in reference frame of the parent (if any) or in world space.
# Objective
When using empty events, it can feel redundant to have to specify the type of the event when sending it.
## Solution
Add a new `fire()` function that sends the default value of the event. This requires that the event derives Default.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Make it possible to use `&World` as a system parameter
## Solution
It seems like all the pieces were already in place, very simple impl
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Provide a non-consuming method of checking if there are events in an `EventReader`.
Fixes#2967
## Solution
Implements the `len` and `is_empty` functions for `EventReader` and `ManualEventReader`, giving users the ability to check for the presence of new events without consuming any.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Calling forget would invalidate the data pointer before it is used.
## Solution
Use `ManuallyDrop` to prevent the value from being dropped without moving it.
This is my first contribution to this exciting project! Thanks so much for your wonderful work. If there is anything that I can improve about this PR, please let me know :)
# Objective
- Fixes#2899
- If a simple one-off command is needed to be added within a System, this simplifies that process so that we can simply do `commands.add(|world: &mut World| { /* code here */ })` instead of defining a custom type implementing `Command`.
## Solution
- This is achieved by `impl Command for F where F: FnOnce(&mut World) + Send + Sync + 'static` as just calling the function.
I am not sure if the bounds can be further relaxed but needed the whole `Send`, `Sync`, and `'static` to get it to compile.
# Objective
A user on Discord couldn't derive SystemParam for this Struct:
```rs
#[derive(SystemParam)]
pub struct SpatialQuery<'w, 's, Q: WorldQuery + Send + Sync + 'static, F: WorldQuery + Send + Sync + 'static = ()>
where
F::Fetch: FilterFetch,
{
query: Query<'w, 's, (C, &'static Transform), F>,
}
```
## Solution
1. The `where`-clause is now also copied to the `SystemParamFetch` impl Block.
2. The `SystemParamState` impl Block no longer gets any defaults for generics
Co-authored-by: MinerSebas <66798382+MinerSebas@users.noreply.github.com>
# Objective
Fixes#3566
## Solution
- [x] Fix broken links in private docs.
- [x] Add the `--document-private-items` flag to the CI.
## Note
The following was said by @killercup in #3566:
> I don't have time to confirm this but I assume that linking to private items throws an error/warning when just running cargo doc, and --document-private-item might actually hide that warning. So to test this, you'd have to run it twice.
I tested this and this is thankfully not the case. If you are linking to a private item you will get a warning no matter if you run `cargo doc` or `cargo doc --document-private-items`.
### Example
I added `struct Test;` to `bevy_core/src/name.rs` and linked to it inside of a doc comment using ``[`Test`]``. After that I ran `cargo doc -p bevy_core --document-private-items` using `RUSTDOCFLAGS="-D warnings"` and got the following output (note the last sentence):
```rust
error: public documentation for `Name` links to private item `Test`
--> crates/bevy_core/src/name.rs:11:82
|
11 | /// Component used to identify an entity. Stores a hash for faster comparisons [`Test`]
| ^^^^ this item is private
|
= note: `-D rustdoc::private-intra-doc-links` implied by `-D warnings`
= note: this link resolves only because you passed `--document-private-items`, but will break without
```
# Objective
- Update the `ClearColor` resource docs as described in #3837 so new users (like me) understand it better
## Solution
- Update the docs to use what @alice-i-cecile described in #3837
I took this one up because I got confused by it this weekend. I didn't understand why the "background" was being set by a `ClearColor` resource.
# Objective
Currently, simply calling `iter` on an event reader will mark all of it's events as read, even if the returned iterator is never used
## Solution
With this, the cursor will simply move to the last unread, but available event when iter is called, and incremented by one per `next` call.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Updates the requirements on [gltf](https://github.com/gltf-rs/gltf) to permit the latest version.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/gltf-rs/gltf/blob/master/CHANGELOG.md">gltf's changelog</a>.</em></p>
<blockquote>
<h2>[1.0.0] - 2022-01-29</h2>
<h3>Added</h3>
<ul>
<li>Support for the <code>KHR_materials_specular</code> extension.</li>
<li>Support for the <code>KHR_materials_variants</code> extension.</li>
<li>Support for the <code>KHR_materials_volume</code> extension.</li>
<li><code>ExactSizeIterator</code> implementation for <code>Joints</code> iterator.</li>
</ul>
<h3>Changed</h3>
<ul>
<li>The <code>mesh.primitives</code> property is now always serialized.</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Incorrect implementation of <code>Normalize<u16></code> and <code>Normalize<f32></code> for <code>u16</code>.</li>
</ul>
<h2>[0.16.0] - 2021-05-13</h2>
<h3>Added</h3>
<ul>
<li>Support for the <code>KHR_texture_transform</code> extension.</li>
<li>Support for the <code>KHR_materials_transmission_ior</code> extension.</li>
</ul>
<h3>Changed</h3>
<ul>
<li><code>Material::alpha_cutoff</code> is now optional.</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>URIs with embedded data failing to import when using <code>import_slice</code>.</li>
<li>Serialization of empty primitives object being skipped.</li>
</ul>
<h2>[0.15.2] - 2020-03-29</h2>
<h3>Changed</h3>
<ul>
<li>All features are now exposed in the <a href="http://docs.rs/gltf">online documentation</a>.</li>
<li>Primary iterators now implement <code>Iterator::nth</code> explicitly for improved performance.</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Compiler warnings regarding deprecation of <code>std::error::Error::description</code>.</li>
</ul>
<h2>[0.15.1] - 2020-03-15</h2>
<h3>Added</h3>
<ul>
<li>New feature <code>guess_mime_type</code> which, as the name suggests, attempts to guess
the MIME type of an image if it doesn't exactly match the standard.</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a href="https://github.com/gltf-rs/gltf/commits">compare view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
# Objective
I think the 'collide' function inside the 'bevy/crates/bevy_sprite/src/collide_aabb.rs' file should return 'Some' if the two rectangles are fully overlapping or one is inside the other. This can happen on low-end machines when a lot of time passes between two frames because of a stutter, so a bullet for example gets inside its target. I can also think of situations where this is a valid use case even without stutters.
## Solution
I added an 'Inside' version to the Collision enum declared in the file. And I use it, when the two rectangles are overlapping, but we can't say from which direction it happened. I gave a 'penetration depth' of minus Infinity to these cases, so that this variant only appears, when the two rectangles overlap from each side fully. I am not sure if this is the right thing to do.
Fixes#1980
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- While it is not safe to enable mappable primary buffers for all GPUs, it should be preferred for integrated GPUs where an integrated GPU is one that is sharing system memory.
## Solution
- Auto-disable mappable primary buffers only for discrete GPUs. If the GPU is integrated and mappable primary buffers are supported, use them.
# Objective
In order to create a glsl shader, we must provide the `naga::ShaderStage` type which is not exported by bevy, meaning a user would have to manually include naga just to access this type.
`pub fn from_glsl(source: impl Into<Cow<'static, str>>, stage: naga::ShaderStage) -> Shader {`
## Solution
Re-rexport naga::ShaderStage from `render_resources`
# Objective
- Test is failing on nightly after the merge of https://github.com/rust-lang/rust/pull/90247
- It was relying on the precision of the duration of `1.0 / 3.0`
## Solution
- Fix the test to be less reliant on float precision to have the same result
This PR is part of the issue #3492.
# Objective
- Add crate level docs to the bevy_log documentation to achieve a 100% documentation coverage.
- Add the #![warn(missing_docs)] lint to keep the documentation coverage for the future.
# Solution
- Add and update the bevy_log crate level docs
- Add a note about panicking from multiple `LogPlugins` per process.
- Add the #![warn(missing_docs)] lint.
# Objective
- Calling .id() has no purpose unless you use the Entity returned
- This is an easy source of confusion for beginners.
- This is easily missed during refactors.
## Solution
- Mark the appropriate methods as #[must_use]
# Objective
- Users can get confused when they ask for watching to be unsupported, then find it isn't supported
- Fixes https://github.com/bevyengine/bevy/issues/3683
## Solution
- Add a warning if the `watch_for_changes` call would do nothing
# Objective
- Fixes#3562
## Solution
- The outdated reference to `TextGlyphs` has been removed, and replaced with a more accurate docstring.
## What was `TextGlyphs`?
This is the real question of this Issue and PR. This is particulary interesting because not only is `TextGlyphs` not a type in bevy, but it _never was_. Indeed, this type never existed on main. Where did it come from?
`TextGlyphs` was originally a tuple struct wrapping a `Vec<PositionedGlyph>`. It was first introduced back in commit ec390aec4e in #765. At the time, position information was being stored on the text entities directly. However, after design review, [it was decided](https://github.com/bevyengine/bevy/pull/765#issuecomment-725047186) to instead store the glyphs in a `HashMap` owned by the `TextPipeline`. When this was done, the original type was not only removed, but abstracted behind a few layers of the `TextPipeline` API. Obviously, the original docstring wasn't updated accordingly.
Later, as part of #1122, the incorrect docstring was swept up when copy/pasting `text_system` for `text2d`. (Although I don't blame @CleanCut for this; it took me like 3 hours to track all this down to find the original context.)
# Objective
- Allow opting-out of the built-in frustum culling for cases where its behaviour would be incorrect
- Make use of the this in the shader_instancing example that uses a custom instancing method. The built-in frustum culling breaks the custom instancing in the shader_instancing example if the camera is moved to:
```rust
commands.spawn_bundle(PerspectiveCameraBundle {
transform: Transform::from_xyz(12.0, 0.0, 15.0)
.looking_at(Vec3::new(12.0, 0.0, 0.0), Vec3::Y),
..Default::default()
});
```
...such that the Aabb of the cube Mesh that is at the origin goes completely out of view. This incorrectly (for the purpose of the custom instancing) culls the `Mesh` and so culls all instances even though some may be visible.
## Solution
- Add a `NoFrustumCulling` marker component
- Do not compute and add an `Aabb` to `Mesh` entities without an `Aabb` if they have a `NoFrustumCulling` marker component
- Do not apply frustum culling to entities with the `NoFrustumCulling` marker component
# Objective
- Do not panic when mroe than 256 point lights are added the scene
- Fixes https://github.com/bevyengine/bevy/issues/3682
## Solution
- Only iterate the first `MAX_POINT_LIGHTS` lights instead of as many as there are
## Open questions
- Should we warn that there are more than the maximum allowed number of point lights in the scene?
# Objective
- When using `WgpuOptionsPriority::Functionality`, which is the default, wgpu::Features::MAPPABLE_PRIMARY_BUFFERS would be automatically enabled. This feature can and does have a significant negative impact on performance for discrete GPUs where resizable bar is not supported, which is a common case. As such, this feature should not be automatically enabled.
- Fixes the performance regression part of https://github.com/bevyengine/bevy/issues/3686 and at least some, if not all cases of https://github.com/bevyengine/bevy/issues/3687
## Solution
- When using `WgpuOptionsPriority::Functionality`, use the adapter-supported features, enable `TEXTURE_ADAPTER_SPECIFIC_FORMAT_FEATURES` and disable `MAPPABLE_PRIMARY_BUFFERS`
# Objective
Fixes#3613
[Link to issue](https://github.com/bevyengine/bevy/issues/3613)
## Solution
Changed the Deref Target to `str` and changed the `deref()` function body so that a `&str` is returned by using `as_ref() `.
Fixed doc comment where render Node input/output methods refered to using `RenderContext` for interaction instead of `RenderGraphContext`
# Objective
The doc comments for `Node` refer to `RenderContext` for slots instead of `RenderGraphContext`, which is only confusing because `Node::run` is passed both `RenderContext` and `RenderGraphContext`
## Solution
Fixed the typo
This PR is part of the issue #3492.
# Objective
- Add and update the bevy_tasks documentation to achieve a 100% documentation coverage (sans `prelude` module)
- Add the #![warn(missing_docs)] lint to keep the documentation coverage for the future.
## Solution
- Add and update the bevy_math documentation.
- Add the #![warn(missing_docs)] lint.
- Added doctest wherever there should be in the missing docs.
# Objective
Emitting compile errors produces cleaner messages than panicking in a proc-macro.
## Solution
- Replace match-with-panic code with call to new `bevy_macro_utils::get_named_struct_fields` function
- Replace one use of match-with-panic for enums with inline match
_Aside:_ I'm also the maintainer of [`darling`](https://docs.rs/darling), a crate which provides a serde-like API for parsing macro inputs. I avoided using it here because it seemed like overkill, but if there are plans to add lots more attributes/macros then that might be a good way of offloading macro error handling.
# Objective
- On Safari mobile, calling `winit_window.set_cursor_grab(true)` fails as the API is not implemented (as there is no cursor on Safari mobile, the api doesn't make sense there). I don't know about other mobile browsers
```
[Error] Unhandled Promise Rejection: TypeError: getObject(arg0).exitPointerLock is not a function. (In 'getObject(arg0).exitPointerLock()', 'getObject(arg0).exitPointerLock' is undefined)
(anonymous function) (rect.js:1089)
wasm-stub
<?>.wasm-function[web_sys::features::gen_Document::Document::exit_pointer_lock::h20ffc49be163fc45]
<?>.wasm-function[winit::platform_impl::platform::backend::canvas::Canvas::set_cursor_grab::h6a9472cf55263e98]
<?>.wasm-function[bevy_winit::winit_windows::WinitWindows::create_window::h9db5b3cbb24347c5]
<?>.wasm-function[<bevy_winit::WinitPlugin as bevy_app::plugin::Plugin>::build::ha4a7c046b80c4280]
<?>.wasm-function[bevy_app::plugin_group::PluginGroupBuilder::finish::h0e5bc78f71c37b2f]
<?>.wasm-function[rect::main::h899852fd17f2d489]
<?>.wasm-function[std::sys_common::backtrace::__rust_begin_short_backtrace::hfe38f282e8dda96b]
<?>.wasm-function[std::rt::lang_start::{{closure}}::hc2f3b555ffc58618]
<?>.wasm-function[std::rt::lang_start_internal::ha901ae30d88554f2]
<?>.wasm-function[main]
<?>.wasm-function[]
wasm-stub
21261
(anonymous function) (rect.js:1664)
asyncFunctionResume
(anonymous function)
promiseReactionJobWithoutPromise
promiseReactionJob
```
## Solution
- Do not call the api to release cursor grab on window creation, as the cursor is not grabbed anyway at this point
# Objective
- Fix incorrect iterator usage in WriteStd430 impl for [T]
- The first item was being written twice. This is correct in the WriteStd140 impl for [T].
## Solution
- See the code.
Documentation added to:
- `App::add_sub_app` (
- `App::update` (mentions that sub apps are updated here)
### Future work
- An example for `add_sub_app` would be good, but I wasn't able to come up with a simple one.
- Since `SubApp` is private, maybe the concept of sub applications could be introduced in the `App` struct-level documentation.
This adds documentation for:
- The trait methods of `Reflect` and its subtraits
- The `partial_eq` and `apply` functions for `Map` et al.
- `DynamicList` and `DynamicMap`
- `TypeRegistry` and related types & traits
- `GetPath`, including an explanation of path string syntax
among other things.
Still to be documented are the various macros and `bevy_reflect::serde`.
# Objective
bevy_transform needed documentation and warn(missing_docs) as requested by #3492
## Solution
warn(missing_docs) was activated and documentation was added to cover the crate
Co-authored-by: Troels Jessen <kairyuka@gmail.com>
# Objective
- Fixes#3616
## Solution
- As described in the issue, documentation for `iter_manual` was copied from `iter_combinations` and did not reflect the behavior of the method. I've pulled some information from #2351 to create a more accurate description.
# Objective
- Removes warning about accidently inserting bundles with `EntityCommands::insert`, but since a component now needs to implement `Component` it is unnecessary.
Super tiny thing. Found this while reviewing #3479.
# Objective
- Simplify code
- Fix the link in the doc comment
## Solution
- Import a single item :)
Co-authored-by: Pascal Hertleif <pascal@technocreatives.com>
# Objective
CI should check for missing backticks in doc comments.
Fixes#3435
## Solution
`clippy` has a lint for this: `doc_markdown`. This enables that lint in the CI script.
Of course, enabling this lint in CI causes a bunch of lint errors, so I've gone through and fixed all of them. This was a huge edit that touched a ton of files, so I split the PR up by crate.
When all of the following are merged, the CI should pass and this can be merged.
+ [x] #3467
+ [x] #3468
+ [x] #3470
+ [x] #3469
+ [x] #3471
+ [x] #3472
+ [x] #3473
+ [x] #3474
+ [x] #3475
+ [x] #3476
+ [x] #3477
+ [x] #3478
+ [x] #3479
+ [x] #3480
+ [x] #3481
+ [x] #3482
+ [x] #3483
+ [x] #3484
+ [x] #3485
+ [x] #3486
#3457 adds the `doc_markdown` clippy lint, which checks doc comments to make sure code identifiers are escaped with backticks. This causes a lot of lint errors, so this is one of a number of PR's that will fix those lint errors one crate at a time.
This PR fixes lints in the `bevy_render` crate.
# Objective
This PR extends the `Events` documentation by:
- informing user about the possible race condition
- explicitly explaining the unusual double buffer implementation
Fixes#3305
Co-authored-by: MiniaczQ <jakub.motyka.2000@gmail.com>
Co-authored-by: MiniaczQ <MiniaczQ@gmail.com>
# Objective
These traits are undocumented on `main`.
## Solution
Now they have docs! Included are examples for each trait and their corresponding `GetTypeField` trait. The docs also mention that `#[derive(Reflect)]` will automatically derive the correct subtrait on structs and tuple structs.
# Objective
In this PR I added the ability to opt-out graphical backends. Closes#3155.
## Solution
I turned backends into `Option` ~~and removed panicking sub app API to force users handle the error (was suggested by `@cart`)~~.
# Objective
The current 2d rendering is specialized to render sprites, we need a generic way to render 2d items, using meshes and materials like we have for 3d.
## Solution
I cloned a good part of `bevy_pbr` into `bevy_sprite/src/mesh2d`, removed lighting and pbr itself, adapted it to 2d rendering, added a `ColorMaterial`, and modified the sprite rendering to break batches around 2d meshes.
~~The PR is a bit crude; I tried to change as little as I could in both the parts copied from 3d and the current sprite rendering to make reviewing easier. In the future, I expect we could make the sprite rendering a normal 2d material, cleanly integrated with the rest.~~ _edit: see <https://github.com/bevyengine/bevy/pull/3460#issuecomment-1003605194>_
## Remaining work
- ~~don't require mesh normals~~ _out of scope_
- ~~add an example~~ _done_
- support 2d meshes & materials in the UI?
- bikeshed names (I didn't think hard about naming, please check if it's fine)
## Remaining questions
- ~~should we add a depth buffer to 2d now that there are 2d meshes?~~ _let's revisit that when we have an opaque render phase_
- ~~should we add MSAA support to the sprites, or remove it from the 2d meshes?~~ _I added MSAA to sprites since it's really needed for 2d meshes_
- ~~how to customize vertex attributes?~~ _#3120_
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Updated the docs for bevy_ui as requested by #3492
## Solution
I have documented the parts I understand. anchors.rs is not in use and should be removed, thus I haven't documented that, and some of the more renderer-heavy code is beyond me and needs input from either cart or someone familiar with bevy rendering
Co-authored-by: Troels Jessen <kairyuka@gmail.com>
# Objective
- Using plain exponential depth slicing for perspective projection cameras results in unnecessarily many slices very close together close to the camera. If the camera is then moved close to a collection of point lights, they will likely exhaust the available uniform buffer space for the lists of which lights affect which clusters.
## Solution
- A simple solution to this is to use a different near plane value for the depth slicing and set it to where the first slice's far plane should be. The default value is 5 and works well. This results in the configured number of depth slices, maintains the exponential slicing beyond the initial slice, and no slices are too small such that they cause problems that are sensitive to the view position.
# Objective
- Fix the case mentioned in https://github.com/bevyengine/bevy/pull/2725#issuecomment-1007014024.
- On a machine with 4 cores, so 1 thread for assets, loading a gltf with only one textures hangs all asset loading
## Solution
- Do not use the task pool when there is only one texture to load
Co-authored-by: François <8672791+mockersf@users.noreply.github.com>
#3457 adds the `doc_markdown` clippy lint, which checks doc comments to make sure code identifiers are escaped with backticks. This causes a lot of lint errors, so this is one of a number of PR's that will fix those lint errors one crate at a time.
This PR fixes lints in the `bevy_ecs` crate.
# Objective
Part of #3492
- Complete inline documentation of `bevy_audio`
## Solution
- Added inline documentation to all public parts of `bevy_audio`
- Added a few inline examples at important places
- Some renaming for clarity (e.g. `AudioLoader` and generics)
- added `#![warn(missing_docs)]` and `#![forbid(unsafe_code)]` to `bevy_audio`
I also tried adding support for the other vorbis file endings `.oga` and `.spx` to the `AudioLoader` (see `file endings` at https://tools.ietf.org/html/rfc5334#section-10.3), but the `rodio` decoder does not seem to support those.
#3457 adds the `doc_markdown` clippy lint, which checks doc comments to make sure code identifiers are escaped with backticks. This causes a lot of lint errors, so this is one of a number of PR's that will fix those lint errors one crate at a time.
This PR fixes lints in the `bevy_ui` crate.
#3457 adds the `doc_markdown` clippy lint, which checks doc comments to make sure code identifiers are escaped with backticks. This causes a lot of lint errors, so this is one of a number of PR's that will fix those lint errors one crate at a time.
This PR fixes lints in the `bevy_text` crate.
# Objective
- Fixes#1920.
- Users often want to know how to get the values of removed components (#1655).
- Stand-alone `bevy_ecs` behavior is very unintuitive, as `World::clear_trackers()` must be manually called.
- Fixes#2999 by extending the existing test (thanks @hymm for pointing me to it) to be clearer and check for component removal as well.
## Solution
- Better docs!
- Better tests!
