# Objective
Add a method for getting a world space ray from a viewport position.
Opted to add a `Ray` type to `bevy_math` instead of returning a tuple of `Vec3`'s as this is clearer and easier to document
The docs on `viewport_to_world` are okay, but I'm not super happy with them.
## Changelog
* Add `Camera::viewport_to_world`
* Add `Camera::ndc_to_world`
* Add `Ray` to `bevy_math`
* Some doc tweaks
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
- Fix#5285
## Solution
- Put the panicking system in a single threaded stage during the test
- This way only the main thread will panic, which is handled by `cargo test`
# Objective
- Fixes contradictory docs in Window::PresentMode partaining to PresentMode fallback behavior. Fix based on commit history showing the most recent update didn't remove old references to the gracefal fallback for Immediate and Mailbox.
- Fixes#5831
## Solution
- Updated the docs for Window::PresentMode itself and for each individual enum variant to clarify which will fallback and which will panic.
Co-authored-by: Noah <noahshomette@gmail.com>
# Objective
fix error with pbr shader's spotlight direction calculation when direction.y ~= 0
## Solution
in pbr_lighting.wgsl, clamp `1-x^2-z^2` to `>= 0` so that we can safely `sqrt` it
# Objective
The `Wireframe` type implements `Reflect`, but is never registered, making its reflection inaccessible.
## Solution
Call `App::register_type::<Wireframe>()` in the `Plugin::build` implementation of `WireframePlugin`.
---
## Changelog
Fixed `Wireframe` type reflection not getting registered.
# Objective
Add more documentation on `StandardMaterial` and improve
consistency on existing doc.
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
Relaxes the trait bound for `World::resource_scope` to allow non-send resources. Fixes#6037.
## Solution
No big changes in code had to be made. Added a check so that the non-send resources won't be accessed from a different thread.
---
## Changelog
- `World::resource_scope` accepts non-send resources now
- `World::resource_scope` verifies non-send access if the resource is non-send
- Two new tests are added, one for valid use of `World::resource_scope` with a non-send resource, and one for invalid use (calling it from a different thread, resulting in panic)
Co-authored-by: Dawid Piotrowski <41804418+Pietrek14@users.noreply.github.com>
# Objective
As explained by #5960, `Commands::get_or_spawn` may return a dangling `EntityCommands` that references a non-existing entities. As explained in [this comment], it may be undesirable to make the method return an `Option`.
- Addresses #5960
- Alternative to #5961
## Solution
This PR adds a doc comment to the method to inform the user that the returned `EntityCommands` is not guaranteed to be valid. It also adds panic doc comments on appropriate `EntityCommands` methods.
[this comment]: https://github.com/bevyengine/bevy/pull/5961#issuecomment-1259870849
# Objective
- Alpha mask was previously ignored when using an unlit material.
- Fixes https://github.com/bevyengine/bevy/issues/4479
## Solution
- Extract the alpha discard to a separate function and use it when unlit is true
## Notes
I tried calling `alpha_discard()` before the `if` in pbr.wgsl, but I had errors related to having a `discard` at the beginning before doing the texture sampling. I'm not sure if there's a way to fix that instead of having the function being called in 2 places.
# Objective
- Currently, errors aren't logged as soon as they are found, they are logged only on the next frame. This means your shader could have an unreported error that could have been reported on the first frame.
## Solution
- Log the error as soon as they are found, don't wait until next frame
## Notes
I discovered this issue because I was simply unwrapping the `Result` from `PipelinCache::get_render_pipeline()` which caused it to fail without any explanations. Admittedly, this was a bit of a user error, I shouldn't have unwrapped that, but it seems a bit strange to wait until the next time the pipeline is processed to log the error instead of just logging it as soon as possible since we already have all the info necessary.
# Objective
- Add ability to create nested spawns. This is needed for stageless. The current executor spawns tasks for each system early and runs the system by communicating through a channel. In stageless we want to spawn the task late, so that archetypes can be updated right before the task is run. The executor is run on a separate task, so this enables the scope to be passed to the spawned executor.
- Fixes#4301
## Solution
- Instantiate a single threaded executor on the scope and use that instead of the LocalExecutor. This allows the scope to be Send, but still able to spawn tasks onto the main thread the scope is run on. This works because while systems can access nonsend data. The systems themselves are Send. Because of this change we lose the ability to spawn nonsend tasks on the scope, but I don't think this is being used anywhere. Users would still be able to use spawn_local on TaskPools.
- Steals the lifetime tricks the `std:🧵:scope` uses to allow nested spawns, but disallow scope to be passed to tasks or threads not associated with the scope.
- Change the storage for the tasks to a `ConcurrentQueue`. This is to allow a &Scope to be passed for spawning instead of a &mut Scope. `ConcurrentQueue` was chosen because it was already in our dependency tree because `async_executor` depends on it.
- removed the optimizations for 0 and 1 spawned tasks. It did improve those cases, but made the cases of more than 1 task slower.
---
## Changelog
Add ability to nest spawns
```rust
fn main() {
let pool = TaskPool::new();
pool.scope(|scope| {
scope.spawn(async move {
// calling scope.spawn from an spawn task was not possible before
scope.spawn(async move {
// do something
});
});
})
}
```
## Migration Guide
If you were using explicit lifetimes and Passing Scope you'll need to specify two lifetimes now.
```rust
fn scoped_function<'scope>(scope: &mut Scope<'scope, ()>) {}
// should become
fn scoped_function<'scope>(scope: &Scope<'_, 'scope, ()>) {}
```
`scope.spawn_local` changed to `scope.spawn_on_scope` this should cover cases where you needed to run tasks on the local thread, but does not cover spawning Nonsend Futures.
## TODO
* [x] think real hard about all the lifetimes
* [x] add doc about what 'env and 'scope mean.
* [x] manually check that the single threaded task pool still works
* [x] Get updated perf numbers
* [x] check and make sure all the transmutes are necessary
* [x] move commented out test into a compile fail test
* [x] look through the tests for scope on std and see if I should add any more tests
Co-authored-by: Michael Hsu <myhsu@benjaminelectric.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Make `Res` cloneable
## Solution
Add an associated fn `clone(self: &Self) -. Self` instead of `Copy + Clone` trait impls to avoid `res.clone()` failing to clone out the underlying `T`
# Objective
Often one wants to create a `UiRect` with a value only specifying a single field. These ways are already available, but not the most ergonomic:
```rust
UiRect::new(Val::Undefined, Val::Undefined, Val::Percent(25.0), Val::Undefined)
```
```rust
UiRect {
top: Val::Percent(25.0),
..default()
}
```
## Solution
Introduce 6 new constructors:
- `horizontal`
- `vertical`
- `left`
- `right`
- `top`
- `bottom`
So the above code can be written instead as:
```rust
UiRect::top(Val::Percent(25.0))
```
This solution is similar to the style fields `margin-left`, `padding-top`, etc. that you would see in CSS, from which bevy's UI has other inspiration. Therefore, it should still feel intuitive to users coming from CSS.
---
## Changelog
### Added
- Additional constructors for `UiRect` to specify values for specific fields
# Objective
Currently, arrays cannot indexed using the reflection path API.
This change makes them behave like lists so `x.get_path("list[0]")` will behave the same way, whether x.list is a "List" (e.g. a Vec) or an array.
## Solution
When syntax is encounterd `[ <idx> ]` we check if the referenced type is either a `ReflectRef::List` or `ReflectRef::Array` (or `ReflectMut` for the mutable case). Since both provide the identical API for accessing entries, we do the same for both, although it requires code duplication as far as I can tell.
This was born from working on #5764, but since this seems to be an easier fix (and I am not sure if I can actually solve #5812) I figured it might be worth to split this out.
# Objective
Simple docs/comments only PR that just fixes some outdated file references left over from the render rewrite.
## Solution
- Change the references to point to the correct files
# Objective
The [Stageless RFC](https://github.com/bevyengine/rfcs/pull/45) involves allowing exclusive systems to be referenced and ordered relative to parallel systems. We've agreed that unifying systems under `System` is the right move.
This is an alternative to #4166 (see rationale in the comments I left there). Note that this builds on the learnings established there (and borrows some patterns).
## Solution
This unifies parallel and exclusive systems under the shared `System` trait, removing the old `ExclusiveSystem` trait / impls. This is accomplished by adding a new `ExclusiveFunctionSystem` impl similar to `FunctionSystem`. It is backed by `ExclusiveSystemParam`, which is similar to `SystemParam`. There is a new flattened out SystemContainer api (which cuts out a lot of trait and type complexity).
This means you can remove all cases of `exclusive_system()`:
```rust
// before
commands.add_system(some_system.exclusive_system());
// after
commands.add_system(some_system);
```
I've also implemented `ExclusiveSystemParam` for `&mut QueryState` and `&mut SystemState`, which makes this possible in exclusive systems:
```rust
fn some_exclusive_system(
world: &mut World,
transforms: &mut QueryState<&Transform>,
state: &mut SystemState<(Res<Time>, Query<&Player>)>,
) {
for transform in transforms.iter(world) {
println!("{transform:?}");
}
let (time, players) = state.get(world);
for player in players.iter() {
println!("{player:?}");
}
}
```
Note that "exclusive function systems" assume `&mut World` is present (and the first param). I think this is a fair assumption, given that the presence of `&mut World` is what defines the need for an exclusive system.
I added some targeted SystemParam `static` constraints, which removed the need for this:
``` rust
fn some_exclusive_system(state: &mut SystemState<(Res<'static, Time>, Query<&'static Player>)>) {}
```
## Related
- #2923
- #3001
- #3946
## Changelog
- `ExclusiveSystem` trait (and implementations) has been removed in favor of sharing the `System` trait.
- `ExclusiveFunctionSystem` and `ExclusiveSystemParam` were added, enabling flexible exclusive function systems
- `&mut SystemState` and `&mut QueryState` now implement `ExclusiveSystemParam`
- Exclusive and parallel System configuration is now done via a unified `SystemDescriptor`, `IntoSystemDescriptor`, and `SystemContainer` api.
## Migration Guide
Calling `.exclusive_system()` is no longer required (or supported) for converting exclusive system functions to exclusive systems:
```rust
// Old (0.8)
app.add_system(some_exclusive_system.exclusive_system());
// New (0.9)
app.add_system(some_exclusive_system);
```
Converting "normal" parallel systems to exclusive systems is done by calling the exclusive ordering apis:
```rust
// Old (0.8)
app.add_system(some_system.exclusive_system().at_end());
// New (0.9)
app.add_system(some_system.at_end());
```
Query state in exclusive systems can now be cached via ExclusiveSystemParams, which should be preferred for clarity and performance reasons:
```rust
// Old (0.8)
fn some_system(world: &mut World) {
let mut transforms = world.query::<&Transform>();
for transform in transforms.iter(world) {
}
}
// New (0.9)
fn some_system(world: &mut World, transforms: &mut QueryState<&Transform>) {
for transform in transforms.iter(world) {
}
}
```
# Objective
I was working with the TextBundle component bundle because I wanted to change the position of the text that the bundle was holding. I used the transform field on the TextBundle at first because that is normally what controls the position of sprites in Bevy and that's what I was used to working with.
But the actual way to change the position of text inside of a TextBundle is to use the Style's position field, not the TextBundle's transform field.
Anecdotally, it was mentioned on the discord that other users have had this issue too.
## Solution
I added a small doc comment to the TextBundle's transform telling users not to use it to set the position of text. And since this issue applies to the other UI bundles, I added comments there as well!
# Objective
Fixes#6078. The `UiColor` component is unhelpfully named: it is unclear, ambiguous with border color and
## Solution
Rename the `UiColor` component (and associated fields) to `BackgroundColor` / `background_colorl`.
## Migration Guide
`UiColor` has been renamed to `BackgroundColor`. This change affects `NodeBundle`, `ButtonBundle` and `ImageBundle`. In addition, the corresponding field on `ExtractedUiNode` has been renamed to `background_color` for consistency.
This is an adoption of #3775
This merges `TextureAtlas` `from_grid_with_padding` into `from_grid` , adding optional padding and optional offset.
Since the orignal PR, the offset had already been added to from_grid_with_padding through #4836
## Changelog
- Added `padding` and `offset` arguments to `TextureAtlas::from_grid`
- Removed `TextureAtlas::from_grid_with_padding`
## Migration Guide
`TextureAtlas::from_grid_with_padding` was merged into `from_grid` which takes two additional parameters for padding and an offset.
```
// 0.8
TextureAtlas::from_grid(texture_handle, Vec2::new(24.0, 24.0), 7, 1);
// 0.9
TextureAtlas::from_grid(texture_handle, Vec2::new(24.0, 24.0), 7, 1, None, None)
// 0.8
TextureAtlas::from_grid_with_padding(texture_handle, Vec2::new(24.0, 24.0), 7, 1, Vec2::new(4.0, 4.0));
// 0.9
TextureAtlas::from_grid(texture_handle, Vec2::new(24.0, 24.0), 7, 1, Some(Vec2::new(4.0, 4.0)), None)
```
Co-authored-by: olefish <88390729+oledfish@users.noreply.github.com>
# Objective
- Sometimes, like when using shaders, you can only use a time value in `f32`. Unfortunately this suffers from floating precision issues pretty quickly. The standard approach to this problem is to wrap the time after a given period
- This is necessary for https://github.com/bevyengine/bevy/pull/5409
## Solution
- Add a `seconds_since_last_wrapping_period` method on `Time` that returns a `f32` that is the `seconds_since_startup` modulo the `max_wrapping_period`
---
## Changelog
Added `seconds_since_last_wrapping_period` to `Time`
## Additional info
I'm very opened to hearing better names. I don't really like the current naming, I just went with something descriptive.
Co-authored-by: Charles <IceSentry@users.noreply.github.com>
# Objective
Now that we can consolidate Bundles and Components under a single insert (thanks to #2975 and #6039), almost 100% of world spawns now look like `world.spawn().insert((Some, Tuple, Here))`. Spawning an entity without any components is an extremely uncommon pattern, so it makes sense to give spawn the "first class" ergonomic api. This consolidated api should be made consistent across all spawn apis (such as World and Commands).
## Solution
All `spawn` apis (`World::spawn`, `Commands:;spawn`, `ChildBuilder::spawn`, and `WorldChildBuilder::spawn`) now accept a bundle as input:
```rust
// before:
commands
.spawn()
.insert((A, B, C));
world
.spawn()
.insert((A, B, C);
// after
commands.spawn((A, B, C));
world.spawn((A, B, C));
```
All existing instances of `spawn_bundle` have been deprecated in favor of the new `spawn` api. A new `spawn_empty` has been added, replacing the old `spawn` api.
By allowing `world.spawn(some_bundle)` to replace `world.spawn().insert(some_bundle)`, this opened the door to removing the initial entity allocation in the "empty" archetype / table done in `spawn()` (and subsequent move to the actual archetype in `.insert(some_bundle)`).
This improves spawn performance by over 10%:
To take this measurement, I added a new `world_spawn` benchmark.
Unfortunately, optimizing `Commands::spawn` is slightly less trivial, as Commands expose the Entity id of spawned entities prior to actually spawning. Doing the optimization would (naively) require assurances that the `spawn(some_bundle)` command is applied before all other commands involving the entity (which would not necessarily be true, if memory serves). Optimizing `Commands::spawn` this way does feel possible, but it will require careful thought (and maybe some additional checks), which deserves its own PR. For now, it has the same performance characteristics of the current `Commands::spawn_bundle` on main.
**Note that 99% of this PR is simple renames and refactors. The only code that needs careful scrutiny is the new `World::spawn()` impl, which is relatively straightforward, but it has some new unsafe code (which re-uses battle tested BundlerSpawner code path).**
---
## Changelog
- All `spawn` apis (`World::spawn`, `Commands:;spawn`, `ChildBuilder::spawn`, and `WorldChildBuilder::spawn`) now accept a bundle as input
- All instances of `spawn_bundle` have been deprecated in favor of the new `spawn` api
- World and Commands now have `spawn_empty()`, which is equivalent to the old `spawn()` behavior.
## Migration Guide
```rust
// Old (0.8):
commands
.spawn()
.insert_bundle((A, B, C));
// New (0.9)
commands.spawn((A, B, C));
// Old (0.8):
commands.spawn_bundle((A, B, C));
// New (0.9)
commands.spawn((A, B, C));
// Old (0.8):
let entity = commands.spawn().id();
// New (0.9)
let entity = commands.spawn_empty().id();
// Old (0.8)
let entity = world.spawn().id();
// New (0.9)
let entity = world.spawn_empty();
```
# Objective
- Add unit tests for ambiguity detection reporting.
- Incremental implementation of #4299.
## Solution
- Refactor ambiguity detection internals to make it testable. As a bonus, this should make it easier to extend in the future.
## Notes
* This code was copy-pasted from #4299 and modified. Credit goes to @alice-i-cecile and @afonsolage, though I'm not sure who wrote what at this point.
## Objective
Fixes https://github.com/bevyengine/bevy/issues/6063
## Solution
- Use `then_some(x)` instead of `then( || x)`.
- Updated error logs from `bevy_ecs_compile_fail_tests`.
## Migration Guide
From Rust 1.63 to 1.64, a new Clippy error was added; now one should use `then_some(x)` instead of `then( || x)`.
# Objective
Both components already derives `Reflect` and it would be nice to have `FromReflect` in order to ser/de between those types without relaying on `downcast`, since it can fail between different platforms, like WebAssembly.
## Solution
Derive `FromReflect` for `Transform` and `GlobalTransform`.
I thought if I should also derive `FromReflect` for `GlobalTransform`, since it's a computed component, but there may be some use cases where a `GlobalTransform` is needed to be sent over the wire, so I decided to do it.
# Objective
- Reconfigure surface after present mode changes. It seems that this is not done currently at runtime. It's pretty common for games to change such graphical settings at runtime.
- Fixes present mode issue in #5111
## Solution
- Exactly like resolution change gets tracked when extracting window, do the same for present mode.
Additionally, I added present mode (vsync) toggling to window settings example.
# Objective
Take advantage of the "impl Bundle for Component" changes in #2975 / add the follow up changes discussed there.
## Solution
- Change `insert` and `remove` to accept a Bundle instead of a Component (for both Commands and World)
- Deprecate `insert_bundle`, `remove_bundle`, and `remove_bundle_intersection`
- Add `remove_intersection`
---
## Changelog
- Change `insert` and `remove` now accept a Bundle instead of a Component (for both Commands and World)
- `insert_bundle` and `remove_bundle` are deprecated
## Migration Guide
Replace `insert_bundle` with `insert`:
```rust
// Old (0.8)
commands.spawn().insert_bundle(SomeBundle::default());
// New (0.9)
commands.spawn().insert(SomeBundle::default());
```
Replace `remove_bundle` with `remove`:
```rust
// Old (0.8)
commands.entity(some_entity).remove_bundle::<SomeBundle>();
// New (0.9)
commands.entity(some_entity).remove::<SomeBundle>();
```
Replace `remove_bundle_intersection` with `remove_intersection`:
```rust
// Old (0.8)
world.entity_mut(some_entity).remove_bundle_intersection::<SomeBundle>();
// New (0.9)
world.entity_mut(some_entity).remove_intersection::<SomeBundle>();
```
Consider consolidating as many operations as possible to improve ergonomics and cut down on archetype moves:
```rust
// Old (0.8)
commands.spawn()
.insert_bundle(SomeBundle::default())
.insert(SomeComponent);
// New (0.9) - Option 1
commands.spawn().insert((
SomeBundle::default(),
SomeComponent,
))
// New (0.9) - Option 2
commands.spawn_bundle((
SomeBundle::default(),
SomeComponent,
))
```
## Next Steps
Consider changing `spawn` to accept a bundle and deprecate `spawn_bundle`.
# Objective
The doc comments for `Command` methods are a bit inconsistent on the format, they sometimes go out of scope, and most importantly they are wrong, in the sense that they claim to perform the action described by the command, while in reality, they just push a command to perform the action.
- Follow-up of #5938.
- Related to #5913.
## Solution
- Where applicable, only stated that a `Command` is pushed.
- Added a “See also” section for similar methods.
- Added a missing “Panics” section for `Commands::entity`.
- Removed a wrong comment about `Commands::get_or_spawn` returning `None` (It does not return an option).
- Removed polluting descriptions of other items.
- Misc formatting changes.
## Future possibilities
Since the `Command` implementors (`Spawn`, `InsertBundle`, `InitResource`, ...) are public, I thought that it might be appropriate to describe the action of the command there instead of the method, and to add a `method → command struct` link to fill the gap.
If that seems too far-fetched, we may opt to make them private, if possible, or `#[doc(hidden)]`.
# Objective
Working on issue #1934 , with linking examples to the documentation. PR for transform examples.
## Solution
Added to the documentation in bevy_transform transform.rs and global_transform.rs utilizing links from examples.
[X] 3d_rotations.rs linked to rotate in Transform
[X] global_vs_local_translation.rs linked to top of Transform and GlobalTransform documentation
[X] scale.rs linked to scale Struct in Transform
[X] transform.rs linked to top of Transform documentation
[X] translation.rs linked to from_translation in Transform
Co-authored-by: bwhitt7 <103079612+bwhitt7@users.noreply.github.com>
@BoxyUwU this is your fault.
Also cart didn't arrive in time to tell us not to do this.
# Objective
- Fix#2974
## Solution
- The first commit just does the actual change
- Follow up commits do steps to prove that this method works to unify as required, but this does not remove `insert_bundle`.
## Changelog
### Changed
Nested bundles now collapse automatically, and every `Component` now implements `Bundle`.
This means that you can combine bundles and components arbitrarily, for example:
```rust
// before:
.insert(A).insert_bundle(MyBBundle{..})
// after:
.insert_bundle((A, MyBBundle {..}))
```
Note that there will be a follow up PR that removes the current `insert` impl and renames `insert_bundle` to `insert`.
### Removed
The `bundle` attribute in `derive(Bundle)`.
## Migration guide
In `derive(Bundle)`, the `bundle` attribute has been removed. Nested bundles are not collapsed automatically. You should remove `#[bundle]` attributes.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
> Note: This is rebased off #4561 and can be viewed as a competitor to that PR. See `Comparison with #4561` section for details.
# Objective
The current serialization format used by `bevy_reflect` is both verbose and error-prone. Taking the following structs[^1] for example:
```rust
// -- src/inventory.rs
#[derive(Reflect)]
struct Inventory {
id: String,
max_storage: usize,
items: Vec<Item>
}
#[derive(Reflect)]
struct Item {
name: String
}
```
Given an inventory of a single item, this would serialize to something like:
```rust
// -- assets/inventory.ron
{
"type": "my_game::inventory::Inventory",
"struct": {
"id": {
"type": "alloc::string::String",
"value": "inv001",
},
"max_storage": {
"type": "usize",
"value": 10
},
"items": {
"type": "alloc::vec::Vec<alloc::string::String>",
"list": [
{
"type": "my_game::inventory::Item",
"struct": {
"name": {
"type": "alloc::string::String",
"value": "Pickaxe"
},
},
},
],
},
},
}
```
Aside from being really long and difficult to read, it also has a few "gotchas" that users need to be aware of if they want to edit the file manually. A major one is the requirement that you use the proper keys for a given type. For structs, you need `"struct"`. For lists, `"list"`. For tuple structs, `"tuple_struct"`. And so on.
It also ***requires*** that the `"type"` entry come before the actual data. Despite being a map— which in programming is almost always orderless by default— the entries need to be in a particular order. Failure to follow the ordering convention results in a failure to deserialize the data.
This makes it very prone to errors and annoyances.
## Solution
Using #4042, we can remove a lot of the boilerplate and metadata needed by this older system. Since we now have static access to type information, we can simplify our serialized data to look like:
```rust
// -- assets/inventory.ron
{
"my_game::inventory::Inventory": (
id: "inv001",
max_storage: 10,
items: [
(
name: "Pickaxe"
),
],
),
}
```
This is much more digestible and a lot less error-prone (no more key requirements and no more extra type names).
Additionally, it is a lot more familiar to users as it follows conventional serde mechanics. For example, the struct is represented with `(...)` when serialized to RON.
#### Custom Serialization
Additionally, this PR adds the opt-in ability to specify a custom serde implementation to be used rather than the one created via reflection. For example[^1]:
```rust
// -- src/inventory.rs
#[derive(Reflect, Serialize)]
#[reflect(Serialize)]
struct Item {
#[serde(alias = "id")]
name: String
}
```
```rust
// -- assets/inventory.ron
{
"my_game::inventory::Inventory": (
id: "inv001",
max_storage: 10,
items: [
(
id: "Pickaxe"
),
],
),
},
```
By allowing users to define their own serialization methods, we do two things:
1. We give more control over how data is serialized/deserialized to the end user
2. We avoid having to re-define serde's attributes and forcing users to apply both (e.g. we don't need a `#[reflect(alias)]` attribute).
### Improved Formats
One of the improvements this PR provides is the ability to represent data in ways that are more conventional and/or familiar to users. Many users are familiar with RON so here are some of the ways we can now represent data in RON:
###### Structs
```js
{
"my_crate::Foo": (
bar: 123
)
}
// OR
{
"my_crate::Foo": Foo(
bar: 123
)
}
```
<details>
<summary>Old Format</summary>
```js
{
"type": "my_crate::Foo",
"struct": {
"bar": {
"type": "usize",
"value": 123
}
}
}
```
</details>
###### Tuples
```js
{
"(f32, f32)": (1.0, 2.0)
}
```
<details>
<summary>Old Format</summary>
```js
{
"type": "(f32, f32)",
"tuple": [
{
"type": "f32",
"value": 1.0
},
{
"type": "f32",
"value": 2.0
}
]
}
```
</details>
###### Tuple Structs
```js
{
"my_crate::Bar": ("Hello World!")
}
// OR
{
"my_crate::Bar": Bar("Hello World!")
}
```
<details>
<summary>Old Format</summary>
```js
{
"type": "my_crate::Bar",
"tuple_struct": [
{
"type": "alloc::string::String",
"value": "Hello World!"
}
]
}
```
</details>
###### Arrays
It may be a bit surprising to some, but arrays now also use the tuple format. This is because they essentially _are_ tuples (a sequence of values with a fixed size), but only allow for homogenous types. Additionally, this is how RON handles them and is probably a result of the 32-capacity limit imposed on them (both by [serde](https://docs.rs/serde/latest/serde/trait.Serialize.html#impl-Serialize-for-%5BT%3B%2032%5D) and by [bevy_reflect](https://docs.rs/bevy/latest/bevy/reflect/trait.GetTypeRegistration.html#impl-GetTypeRegistration-for-%5BT%3B%2032%5D)).
```js
{
"[i32; 3]": (1, 2, 3)
}
```
<details>
<summary>Old Format</summary>
```js
{
"type": "[i32; 3]",
"array": [
{
"type": "i32",
"value": 1
},
{
"type": "i32",
"value": 2
},
{
"type": "i32",
"value": 3
}
]
}
```
</details>
###### Enums
To make things simple, I'll just put a struct variant here, but the style applies to all variant types:
```js
{
"my_crate::ItemType": Consumable(
name: "Healing potion"
)
}
```
<details>
<summary>Old Format</summary>
```js
{
"type": "my_crate::ItemType",
"enum": {
"variant": "Consumable",
"struct": {
"name": {
"type": "alloc::string::String",
"value": "Healing potion"
}
}
}
}
```
</details>
### Comparison with #4561
This PR is a rebased version of #4561. The reason for the split between the two is because this PR creates a _very_ different scene format. You may notice that the PR descriptions for either PR are pretty similar. This was done to better convey the changes depending on which (if any) gets merged first. If #4561 makes it in first, I will update this PR description accordingly.
---
## Changelog
* Re-worked serialization/deserialization for reflected types
* Added `TypedReflectDeserializer` for deserializing data with known `TypeInfo`
* Renamed `ReflectDeserializer` to `UntypedReflectDeserializer`
* ~~Replaced usages of `deserialize_any` with `deserialize_map` for non-self-describing formats~~ Reverted this change since there are still some issues that need to be sorted out (in a separate PR). By reverting this, crates like `bincode` can throw an error when attempting to deserialize non-self-describing formats (`bincode` results in `DeserializeAnyNotSupported`)
* Structs, tuples, tuple structs, arrays, and enums are now all de/serialized using conventional serde methods
## Migration Guide
* This PR reduces the verbosity of the scene format. Scenes will need to be updated accordingly:
```js
// Old format
{
"type": "my_game::item::Item",
"struct": {
"id": {
"type": "alloc::string::String",
"value": "bevycraft:stone",
},
"tags": {
"type": "alloc::vec::Vec<alloc::string::String>",
"list": [
{
"type": "alloc::string::String",
"value": "material"
},
],
},
}
// New format
{
"my_game::item::Item": (
id: "bevycraft:stone",
tags: ["material"]
)
}
```
[^1]: Some derives omitted for brevity.
# Objective
Add traits to events in `bevy_input` and `bevy_windows`: `Copy`, `Serialize`/`Deserialize`, `PartialEq`, and `Eq`, as requested in https://github.com/bevyengine/bevy/issues/6022, https://github.com/bevyengine/bevy/issues/6023, https://github.com/bevyengine/bevy/issues/6024.
## Solution
Added the traits to events in `bevy_input` and `bevy_windows`. Added dependency of `serde` in `Cargo.toml` of `bevy_input`.
## Migration Guide
If one has been `.clone()`'ing `bevy_input` events, Clippy will now complain about that. Just remove `.clone()` to solve.
## Other Notes
Some events in `bevy_input` had `f32` fields, so `Eq` trait was not derived for them.
Some events in `bevy_windows` had `String` fields, so `Copy` trait was not derived for them.
Co-authored-by: targrub <62773321+targrub@users.noreply.github.com>
# Objective
Implement `IntoIterator` for `&Extract<P>` if the system parameter it wraps implements `IntoIterator`.
Enables the use of `IntoIterator` with an extracted query.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
`AssetServer::watch_for_changes()` is racy and redundant with `AssetServerSettings`.
Closes#5964.
## Changelog
* Remove `AssetServer::watch_for_changes()`
* Add `AssetServerSettings` to the prelude.
* Minor cleanup.
## Migration Guide
`AssetServer::watch_for_changes()` was removed.
Instead, use the `AssetServerSettings` resource.
```rust
app // AssetServerSettings must be inserted before adding the AssetPlugin or DefaultPlugins.
.insert_resource(AssetServerSettings {
watch_for_changes: true,
..default()
})
```
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
When trying derive `Debug` for type that has `DynamicEnum` it wasn't possible, since neither of `DynamicEnum`, `DynamicTuple`, `DynamicVariant` or `DynamicArray` implements `Debug`.
## Solution
Implement Debug for those types, using `derive` macro
---
## Changelog
- `DynamicEnum`, `DynamicTuple`, `DynamicVariant` and `DynamicArray` now implements `Debug`
# Objective
Fixes#5636
Summary: The FontAtlasSet caches generated font textures per font size. Since font size can be any arbitrary floating point number it is possible for the user to generate thousands of font texture inadvertently by changing the font size over time. This results in a memory leak as these generated font textures fill the available memory.
## Solution
We limit the number of possible font sizes that we will cache and throw an error if the user attempts to generate more. This error encourages the user to use alternative, less performance intensive methods to accomplish the same goal. If the user requires more font sizes and the alternative solutions wont work there is now a TextSettings Resource that the user can set to configure this limit.
---
## Changelog
The number of cached font sizes per font is now limited with a default limit of 100 font sizes per font. This limit is configurable via the new TextSettings struct.
# Objective
A common pitfall since 0.8 is the requirement on `ComputedVisibility`
being present on all ancestors of an entity that itself has
`ComputedVisibility`, without which, the entity becomes invisible.
I myself hit the issue and got very confused, and saw a few people hit
it as well, so it makes sense to provide a hint of what to do when such
a situation is encountered.
- Fixes#5849
- Closes#5616
- Closes#2277
- Closes#5081
## Solution
We now check that all entities with both a `Parent` and a
`ComputedVisibility` component have parents that themselves have a
`ComputedVisibility` component.
Note that the warning is only printed once.
We also add a similar warning to `GlobalTransform`.
This only emits a warning. Because sometimes it could be an intended
behavior.
Alternatives:
- Do nothing and keep repeating to newcomers how to avoid recurring
pitfalls
- Make the transform and visibility propagation tolerant to missing
components (#5616)
- Probably archetype invariants, though the current draft would not
allow detecting that kind of errors
---
## Changelog
- Add a warning when encountering dubious component hierarchy structure
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
- To address problems outlined in https://github.com/bevyengine/bevy/issues/5245
## Solution
- Introduce `reflect(skip_serializing)` on top of `reflect(ignore)` which disables automatic serialisation to scenes, but does not disable reflection of the field.
---
## Changelog
- Adds:
- `bevy_reflect::serde::type_data` module
- `SerializationData` structure for describing which fields are to be/not to be ignored, automatically registers as type_data for struct-based types
- the `skip_serialization` flag for `#[reflect(...)]`
- Removes:
- ability to ignore Enum variants in serialization, since that didn't work anyway
## Migration Guide
- Change `#[reflect(ignore)]` to `#[reflect(skip_serializing)]` where disabling reflection is not the intended effect.
- Remove ignore/skip attributes from enum variants as these won't do anything anymore
# Objective
As of Rust 1.59, `std:🧵:available_parallelism` has been stabilized. As of Rust 1.61, the API matches `num_cpus::get` by properly handling Linux's cgroups and other sandboxing mechanisms.
As bevy does not have an established MSRV, we can replace `num_cpus` in `bevy_tasks` and reduce our dependency tree by one dep.
## Solution
Replace `num_cpus` with `std:🧵:available_parallelism`. Wrap it to have a fallback in the case it errors out and have it operate in the same manner as `num_cpus` did.
This however removes `physical_core_count` from the API, though we are currently not using it in any way in first-party crates.
---
## Changelog
Changed: `bevy_tasks::logical_core_count` -> `bevy_tasks::available_parallelism`.
Removed: `bevy_tasks::physical_core_count`.
## Migration Guide
`bevy_tasks::logical_core_count` and `bevy_tasks::physical_core_count` have been removed. `logical_core_count` has been replaced with `bevy_tasks::available_parallelism`, which works identically. If `bevy_tasks::physical_core_count` is required, the `num_cpus` crate can be used directly, as these two were just aliases for `num_cpus` APIs.
# Objective
Fixes Issue #6005.
## Solution
Replaced WorldQuery with ReadOnlyWorldQuery on F generic in Query filters and QueryState to restrict its trait bound.
## Migration Guide
Query filter (`F`) generics are now bound by `ReadOnlyWorldQuery`, rather than `WorldQuery`. If for some reason you were requesting `Query<&A, &mut B>`, please use `Query<&A, With<B>>` instead.
Very small change that improves the usability of `Sprite`.
Before this PR, the only way to render a portion of an `Image` was to create a `TextureAtlas` and use `TextureAtlasSprite`/`SpriteSheetBundle`. This can be very annoying for one-off use cases, like if you just want to remove a border from an image, or something. Using `Sprite`/`SpriteBundle` always meant that the entire full image would be rendered.
This PR adds an optional `rect` field to `Sprite`, allowing a sub-rectangle of the image to be rendered. This is similar to how texture atlases work, but does not require creating a texture atlas asset, making it much more convenient and efficient for quick one-off use cases.
Given how trivial this change is, it really felt like missing functionality in Bevy's sprites API. ;)
## Changelog
Added:
- `rect` field on `Sprite`: allows rendering a portion of the sprite's image; more convenient for one-off use cases, than creating a texture atlas.
# Objective
fixes#5946
## Solution
adjust cluster index calculation for viewport origin.
from reading point 2 of the rasterization algorithm description in https://gpuweb.github.io/gpuweb/#rasterization, it looks like framebuffer space (and so @bulitin(position)) is not meant to be adjusted for viewport origin, so we need to subtract that to get the right cluster index.
- add viewport origin to rust `ExtractedView` and wgsl `View` structs
- subtract from frag coord for cluster index calculation
# Objective
Currently some TextureFormats are not supported by the Image type.
The `TextureFormat::Rg16Unorm` format is useful for storing minmax heightmaps.
Similar to #5249 I now additionally require image to support the dual channel variant.
## Solution
Added `TextureFormat::Rg16Unorm` support to Image.
Additionally this PR derives `Resource` for `SpecializedComputePipelines`, because for some reason this was missing.
All other special pipelines do derive `Resource` already.
Co-authored-by: Kurt Kühnert <51823519+Ku95@users.noreply.github.com>
# Objective
Fixes#5963
## Solution
Add remaining fn in Timer class, this function only minus total duration with elapsed time.
Co-authored-by: Sergi-Ferrez <61662926+Sergi-Ferrez@users.noreply.github.com>
# Objective
While coding in bevy I needed to get the elapsed time of a stopwatch as f64.
I found it quite odd there are functions on Timer to get time as f64 but not on the Stopwatch.
## Solution
- added a function that returns the `Stopwatch` elapsed time as `f64`
---
## Changelog
### Added
- Added a function to get `Stopwatch` elapsed time as `f64`
### Fixed
- The Stopwatch elapsed function had a wrong docs link
# Objective
While using the ParallelExecutor, systems do not actually start until `prepare_systems` completes. In stages where there are large numbers of "empty" systems with very little work to do, this delay adds significant overhead, which can add up over many stages.
## Solution
Immediately and synchronously signal the start of systems that can run without dependencies inside `prepare_systems` instead of waiting for the first executor iteration after `prepare_systems` completes. Any system that is dependent on them still cannot run until after `prepare_systems` completes, but there are a large number of unconstrained systems in the base engine where this is a general benefit in almost every case.
## Performance
This change was tested against `many_foxes` in the default configuration. As this change is sensitive to the overhead around scheduling systems, the spans for measuring system timing, system overhead, and system commands were all commented out for these measurements.
The median stage timings between `main` and this PR are as follows:
|stage|main|this PR|
|:--|:--|:--|
|First|75.54 us|61.61 us|
|LoadAssets|51.05 us|42.32 us|
|PreUpdate|54.6 us|55.56 us|
|Update|61.89 us|51.5 us|
|PostUpdate|7.27 ms|6.71 ms|
|AssetEvents|47.82 us|35.95 us|
|Last|39.19 us|37.71 us|
|reserve_and_flush|57.83 us|48.2 us|
|Extract|1.41 ms|1.28 ms|
|Prepare|554.49 us|502.53 us|
|Queue|216.29 us|207.51 us|
|Sort|67.03 us|60.99 us|
|Render|1.73 ms|1.58 ms|
|Cleanup|33.55 us|30.76 us|
|Clear Entities|18.56 us|17.05 us|
|**full frame**|**11.9 ms**|**10.91 ms**|
For the first few stages, the benefit is small but cumulative over each. For PostUpdate in particular, this allows `parent_update` to run while prepare_systems is running, which is required for the animation and transform propagation systems, which dominate the time spent in the stage, but also frontloads the contention as the other "empty" systems are also running while `parent_update` is running. For Render, where there is just a single large exclusive system, the benefit comes from not waiting on a spuriously scheduled task on the task pool to kick off the system: it's immediately scheduled to run.
# Objective
EntityMut::world takes &mut self instead of &self I don't see any reason for this.
EntityRef is overly restrictive with fn world and could return &'w World
---
## Changelog
- EntityRef now implements Copy and Clone
- EntityRef::world is now fn(&self) -> &'w World instead of fn(&mut self) -> &World
- EntityMut::world is now fn(&self) -> &World instead of fn(&mut self) -> &World
# Objective
Currently, `Local` has a `Sync` bound. Theoretically this is unnecessary as a local can only ever be accessed from its own system, ensuring exclusive access on one thread. This PR removes this restriction.
## Solution
- By removing the `Resource` bound from `Local` and adding the new `SyncCell` threading primative, `Local` can have the `Sync` bound removed.
## Changelog
### Added
- Added `SyncCell` to `bevy_utils`
### Changed
- Removed `Resource` bound from `Local`
- `Local` is now wrapped in a `SyncCell`
## Migration Guide
- Any code relying on `Local<T>` having `T: Resource` may have to be changed, but this is unlikely.
Co-authored-by: PROMETHIA-27 <42193387+PROMETHIA-27@users.noreply.github.com>
While looking into `collide()`, I wrote some tests to confirm the behavior I read in the code. This PR adds those tests and improves the documentation.
Co-authored-by: robem <669201+robem@users.noreply.github.com>
# Objective
- Make people stop believing that commands are applied immediately (hopefully).
- Close#5913.
- Alternative to #5930.
## Solution
I added the clause “to perform impactful changes to the `World`” to the first line to subliminally help the reader accept the fact that some operations cannot be performed immediately without messing up everything.
Then I explicitely said that applying a command requires exclusive `World` access, and finally I proceeded to show when these commands are automatically applied.
I also added a brief paragraph about how commands can be applied manually, if they want.
---
### Further possibilities
If you agree, we can also change the text of the method documentation (in a separate PR) to stress about enqueueing an action instead of just performing it. For example, in `Commands::spawn`:
> Creates a new `Entity`
would be changed to something like:
> Issues a `Command` to spawn a new `Entity`
This may even have a greater effect, since when typing in an IDE, the docs of the method pop up and the programmer can read them on the fly.
# Objective
Without this we can inappropriately merge batches together without properly accounting for non-batch items between them, and the merged batch will then be sorted incorrectly later.
This change seems to reliably fix the issue I was seeing in #5919.
## Solution
Ensure the `batch_phase_system` runs after the `sort_phase_system`, so that batching can only look at actually adjacent phase items.
# Objective
I wanted to run the code
```rust
let reflect_resource: ReflectResource = ...;
let value: Mut<dyn Reflect> = reflect_resource.reflect(world);
value.deref();
// ^ ERROR: deref method doesn't exist because `dyn Reflect` doesnt satisfy `: Sized`.
```
## Solution
Relax `Sized` bounds in all the methods and trait implementations for `Mut` and friends.
# Objective
This code is very disjoint, and the `stage.rs` file that it's in is already very long.
All I've done is move the code and clean up the compiler errors that result.
Followup to #5916, split out from #4299.
# Objective
Ambiguity sets are used to ignore system order ambiguities between groups of systems. However, they are not very useful: they are clunky, poorly integrated, and generally hampered by the difficulty using (or discovering) the ambiguity detector.
As a first step to the work in #4299, we're removing them.
## Migration Guide
Ambiguity sets have been removed.
# Objective
- Our existing change detection API is not flexible enough for advanced users: particularly those attempting to do rollback networking.
- This is an important use case, and with adequate warnings we can make mucking about with change ticks scary enough that users generally won't do it.
- Fixes#5633.
- Closes#2363.
## Changelog
- added `ChangeDetection::set_last_changed` to manually mutate the `last_change_ticks` field"
- the `ChangeDetection` trait now requires an `Inner` associated type, which contains the value being wrapped.
- added `ChangeDetection::bypass_change_detection`, which hands out a raw `&mut Inner`
## Migration Guide
Add the `Inner` associated type and new methods to any type that you've implemented `DetectChanges` for.
# Objective
- I'm currently working on being able to call methods on reflect types (https://github.com/jakobhellermann/bevy_reflect_fns)
- for that, I'd like to add methods to the `Input<KeyCode>` resource (which I'm doing by registering type data)
- implementing `Reflect` is currently a requirement for having type data in the `TypeRegistry`
## Solution
- derive `Reflect` for `KeyCode` and `Input`
- uses `#[reflect_value]` for `Input`, since it's fields aren't supposed to be observable
- using reflect_value would need `Clone` bounds on `T`, but since all the methods (`.pressed` etc) already require `T: Copy`, I unified everything to requiring `Copy`
- add `Send + Sync + 'static` bounds, also required by reflect derive
## Unrelated improvements
I can extract into a separate PR if needed.
- the `Reflect` derive would previously ignore `#[reflect_value]` and only accept `#[reflect_value()]` which was a bit confusing
- the generated code used `val.clone()` on a reference, which is fine if `val` impls `Clone`, but otherwise also compiles with a worse error message. Change to `std::clone::Clone::clone(val)` instead which gives a neat `T does not implement Clone` error
Make API users aware that the type aliases `QueryItem` and `QueryFetch` can be used instead of the more bloated alternative with `WorldQueryGats`.
Fixes#5842
# Objective
Make `TextLayoutInfo` more accessible as a component, rather than internal to `TextPipeline`. I am working on a plugin that manipulates these and there is no (mutable) access to them right now.
## Solution
This changes `TextPipeline::queue_text` to return `TextLayoutInfo`'s rather than storing them in a map internally. `text2d_system` and `text_system` now take the returned `TextLayoutInfo` and store it as a component of the entity. I considered adding an accessor to `TextPipeline` (e.g. `get_glyphs_mut`) but this seems like it might be a little faster, and also has the added benefit of cleaning itself up when entities are removed. Right now nothing is ever removed from the glyphs map.
## Changelog
Removed `DefaultTextPipeline`. `TextPipeline` no longer has a generic key type. `TextPipeline::queue_text` returns `TextLayoutInfo` directly.
## Migration Guide
This might break a third-party crate? I could restore the orginal TextPipeline API as a wrapper around what's in this PR.
# Objective
Fixes#5882
## Solution
Per https://github.com/rust-windowing/winit/issues/1705, the root cause is "UIWindow should be created inside UIApplicationMain". Currently, there are two places to create UIWindow, one is Plugin's build function, which is not inside UIApplicationMain. Just comment it out, and it works.
# Objective
Support monitor selection for all window modes.
Fixes#5875.
## Changelog
* Moved `MonitorSelection` out of `WindowPosition::Centered`, into `WindowDescriptor`.
* `WindowPosition::At` is now relative to the monitor instead of being in 'desktop space'.
* Renamed `MonitorSelection::Number` to `MonitorSelection::Index` for clarity.
* Added `WindowMode` to the prelude.
* `Window::set_position` is now relative to a monitor and takes a `MonitorSelection` as argument.
## Migration Guide
`MonitorSelection` was moved out of `WindowPosition::Centered`, into `WindowDescriptor`.
`MonitorSelection::Number` was renamed to `MonitorSelection::Index`.
```rust
// Before
.insert_resource(WindowDescriptor {
position: WindowPosition::Centered(MonitorSelection::Number(1)),
..default()
})
// After
.insert_resource(WindowDescriptor {
monitor: MonitorSelection::Index(1),
position: WindowPosition::Centered,
..default()
})
```
`Window::set_position` now takes a `MonitorSelection` as argument.
```rust
window.set_position(MonitorSelection::Current, position);
```
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
Clean up taffy nodes when the associated UI node gets removed. The current UI code will keep the taffy nodes around forever.
## Solution
Use `RemovedComponents<Node>` to iterate over nodes that are no longer valid UI nodes or that have been despawned, and remove them from taffy and the internal hash map.
## Implementation Notes
Do note that using `despawn()` instead of `despawn_recursive()` on a UI node that has children will result in a [warnings spam](https://github.com/bevyengine/bevy/blob/main/crates/bevy_ui/src/flex/mod.rs#L120) since the children will not be part of a proper UI hierarchy anymore.
---
## Changelog
- Fixed memory leak when nodes are removed in bevy_ui
# Objective
- The `Gamepad` type is a tiny value-containing type that implements `Copy`.
- By convention, references to `Copy` types should be avoided, as they can introduce overhead and muddle the semantics of what's going on.
- This allows us to reduce boilerplate reference manipulation and lifetimes in user facing code.
## Solution
- Make assorted methods on `Gamepads` take / return a raw `Gamepad`, rather than `&Gamepad`.
## Migration Guide
- `Gamepads::iter` now returns an iterator of `Gamepad`. rather than an iterator of `&Gamepad`.
- `Gamepads::contains` now accepts a `Gamepad`, rather than a `&Gamepad`.
## Solution
Exposes the image <-> "texture" as methods on `Image`.
## Extra
I'm wondering if `image_texture_conversion.rs` should be renamed to `image_conversion.rs`. That or the file be deleted altogether in favour of putting the code alongside the rest of the `Image` impl. Its kind-of weird to refer to the `Image` as a texture.
Also `Image::convert` is a public method so I didn't want to edit its signature, but it might be nice to have the function consume the image instead of just passing a reference to it because it would eliminate a clone.
## Changelog
> Rename `image_to_texture` to `Image::from_dynamic`
> Rename `texture_to_image` to `Image::try_into_dynamic`
> `Image::try_into_dynamic` now returns a `Result` (this is to make it easier for users who didn't read that only a few conversions are supported to figure it out.)
# Objective
Document most of the public items of the `bevy_render::camera` module and its
sub-modules.
## Solution
Add docs to most public items. Follow-up from #3447.
# Objective
- Increase consistency across documentation of `Query` methods.
- Fixes#5506
## Solution
- See #4989. This PR is derived from it. It just includes changes to the `Query` methods' docs.
# Objective
Document `PipelineCache` and a few other related types.
## Solution
Add documenting comments to `PipelineCache` and a few other related
types in the same file.
# Objective
https://github.com/bevyengine/bevy/pull/503 added these.
I don't know what problem it solved, the PR doesn't say and the code didn't make it obvious to me.
## Solution
AFAIK removing unsafe `Send`/`Sync` impls can't introduce unsoundness.
Yeet.
## Migration Guide
Why tho.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
The documentation on `Reflect` doesn't account for the recently added reflection traits: [`Array`](https://github.com/bevyengine/bevy/pull/4701) and [`Enum`](https://github.com/bevyengine/bevy/pull/4761).
## Solution
Updated the documentation for `Reflect` to account for the `Array` and `Enum`.
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
- Update notify dependency to 5.0.0 stable
- Fix breaking changes
- Closes#5861
## Solution
- RecommendedWatcher now takes a Config argument. Giving it the default Config should be the same behavior as before (check every 30 seconds)
# Objective
- Update ron to 0.8.0
- Fix breaking changes
- Closes#5862
## Solution
- Removed now non-existing method call (behavior is now the same without it)
# Objective
- Update `Query` docs with better terminology
- add some performance remarks (Fixes#4742)
## Solution
- See #4989. This PR is derived from it. It just includes changes to the `Query` struct docs.
# Objective
Promote the `Rect` utility of `sprite::Rect`, which defines a rectangle
by its minimum and maximum corners, to the `bevy_math` crate to make it
available as a general math type to all crates without the need to
depend on the `bevy_sprite` crate.
Fixes#5575
## Solution
Move `sprite::Rect` into `bevy_math` and fix all uses.
Implement `Reflect` for `Rect` directly into the `bevy_reflect` crate by
having `bevy_reflect` depend on `bevy_math`. This looks like a new
dependency, but the `bevy_reflect` was "cheating" for other math types
by directly depending on `glam` to reflect other math types, thereby
giving the illusion that there was no dependency on `bevy_math`. In
practice conceptually Bevy's math types are reflected into the
`bevy_reflect` crate to avoid a dependency of that crate to a "lower
level" utility crate like `bevy_math` (which in turn would make
`bevy_reflect` be a dependency of most other crates, and increase the
risk of circular dependencies). So this change simply formalizes that
dependency in `Cargo.toml`.
The `Rect` struct is also augmented in this change with a collection of
utility methods to improve its usability. A few uses cases are updated
to use those new methods, resulting is more clear and concise syntax.
---
## Changelog
### Changed
- Moved the `sprite::Rect` type into `bevy_math`.
### Added
- Added several utility methods to the `math::Rect` type.
## Migration Guide
The `bevy::sprite::Rect` type moved to the math utility crate as
`bevy::math::Rect`. You should change your imports from `use
bevy::sprite::Rect` to `use bevy::math::Rect`.
# Objective
- In WASM, creating a pipeline can easily take 2 seconds, freezing the game while doing so
- Preloading pipelines can be done during a "loading" state, but it is not trivial to know which pipeline to preload, or when it's done
## Solution
- Add a log with shaders being loaded and their shader defs
- add a function on `PipelineCache` to return the number of ready pipelines
# Objective
- Easier to work with model assets
- Models are often one mesh, many textures. This can be hard to use in Bevy as it's not possible to clone the scene to have one scene for each material. It's still possible to instantiate the texture-less scene, then modify the texture material once spawned but that means happening during play and is quite more painful
## Solution
- Expose the code to clone a scene. This code already existed but was only possible to use to spawn the scene
# Objective
Extend the scope of Gamepad to accommodate devices that have more inputs than a typical controller.
## Solution
Add additional enum variants to both _GamepadButtonType_ and _GamepadAxisType_ that supports up to 255 more non-standard buttons/axis respectively.
## Personal motivation
I have been writing an alternative to the GILRS crate, and with this simple change to the source code, It will be a trivial thing to direct new devices through the bevy systems, even when they do not always behave exactly like your typical controller.
# Objective
- Fixes#5850
## Solution
- As described in the issue, added a `get_entity` method on `Commands` that returns an `Option<EntityCommands>`
## Changelog
- Added the new method with a simple doc test
- I have re-used `get_entity` in `entity`, similarly to how `get_single` is used in `single` while additionally preserving the error message
- Add `#[inline]` to both functions
Entities that have commands queued to despawn system will still return commands when `get_entity` is called but that is representative of the fact that the entity is still around until those commands are flushed.
A potential `contains_entity` could also be added in this PR if desired, that would effectively be replacing Entities.contains but may be more discoverable if this is a common use case.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
I'm build a UI system for bevy. In this UI system there is a concept of a system per UI entity. I had an issue where change detection wasn't working how I would expect and it's because when a function system is ran the `last_change_tick` is updated with the latest tick(from world). In my particular case I want to "wait" to update the `last_change_tick` until after my system runs for each entity.
## Solution
Initially I thought bypassing the change detection all together would be a good fix, but on talking to some users in discord a simpler fix is to just expose `last_change_tick` to the end users. This is achieved by adding the following to the `System` trait:
```rust
/// Allows users to get the system's last change tick.
fn get_last_change_tick(&self) -> u32;
/// Allows users to set the system's last change tick.
fn set_last_change_tick(&mut self, last_change_tick: u32);
```
This causes a bit of weirdness with two implementors of `System`. `FixedTimestep` and `ChainSystem` both implement system and thus it's required that some sort of implementation be given for the new functions. I solved this by outputting a warning and not doing anything for these systems.
I think it's important to understand why I can't add the new functions only to the function system and not to the `System` trait. In my code I store the systems generically as `Box<dyn System<...>>`. I do this because I have differing parameters that are being passed in depending on the UI widget's system. As far as I can tell there isn't a way to take a system trait and cast it into a specific type without knowing what those parameters are.
In my own code this ends up looking something like:
```rust
// Runs per entity.
let old_tick = widget_system.get_last_change_tick();
should_update_children = widget_system.run((widget_tree.clone(), entity.0), world);
widget_system.set_last_change_tick(old_tick);
// later on after all the entities have been processed:
for system in context.systems.values_mut() {
system.set_last_change_tick(world.read_change_tick());
}
```
## Changelog
- Added `get_last_change_tick` and `set_last_change_tick` to `System`'s.
# Objective
Since `identity` is a const fn that takes no arguments it seems logical to make it an associated constant.
This is also more in line with types from glam (eg. `Quat::IDENTITY`).
## Migration Guide
The method `identity()` on `Transform`, `GlobalTransform` and `TransformBundle` has been deprecated.
Use the associated constant `IDENTITY` instead.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
- `for_each` methods inconsistently used an actual generic param or `impl Trait` change it to use `impl Trait` always, change them to be consistent
- some methods returned `'w 's` or `'_ '_`, change them to return `'_ 's`
## Solution
- Do what i just said
---
## Changelog
- `iter_unsafe` and `get_unchecked` no longer return borrows tied to `'w`
## Migration Guide
transmute the returned borrow from `iter_unsafe` and `get_unchecked` if this broke you (although preferably find a way to write your code that doesnt need to do this...)
# Objective
Sometimes it's useful to be able to retrieve all the fields of a container type so that they may be processed separately. With reflection, however, we typically only have access to references.
The only alternative is to "clone" the value using `Reflect::clone_value`. This, however, returns a Dynamic type in most cases. The solution there would be to use `FromReflect` instead, but this also has a problem in that it means we need to add `FromReflect` as an additional bound.
## Solution
Add a `drain` method to all container traits. This returns a `Vec<Box<dyn Reflect>>` (except for `Map` which returns `Vec<(Box<dyn Reflect>, Box<dyn Reflect>)>`).
This allows us to do things a lot simpler. For example, if we finished processing a struct and just need a particular value:
```rust
// === OLD === //
/// May or may not return a Dynamic*** value (even if `container` wasn't a `DynamicStruct`)
fn get_output(container: Box<dyn Struct>, output_index: usize) -> Box<dyn Reflect> {
container.field_at(output_index).unwrap().clone_value()
}
// === NEW === //
/// Returns _exactly_ whatever was in the given struct
fn get_output(container: Box<dyn Struct>, output_index: usize) -> Box<dyn Reflect> {
container.drain().remove(output_index).unwrap()
}
```
### Discussion
* Is `drain` the best method name? It makes sense that it "drains" all the fields and that it consumes the container in the process, but I'm open to alternatives.
---
## Changelog
* Added a `drain` method to the following traits:
* `Struct`
* `TupleStruct`
* `Tuple`
* `Array`
* `List`
* `Map`
* `Enum`
# Objective
- The reflection `List` trait does not have a `pop` function.
- Popping elements off a list is a common use case and is almost always supported by `List`-like types.
## Solution
- Add the `pop()` method to the `List` trait and add the appropriate implementations of this function.
## Migration Guide
- Any custom type that implements the `List` trait will now need to implement the `pop` method.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fixes#5763
## Solution
Implemented as reflect value like the current `Range`. Is there a benefit to changing everything to a reflect struct?
# Objective
remove `insert_resource_with_id` because `insert_resource_by_id` exists and does almost exactly the same thing
blocked on #5587 because otherwise we will leak a resource when it's inserted
## Solution
remove the function and also add a safety invariant of to `insert_resource_by_id` that the id be valid for the world.
I didn't see any discussion in #4447 about this safety invariant being left off in favor of a panic so I'm curious if there was one or if it just seemed nicer to have less safety invariants for callers to uphold 😅
---
## Changelog
- safety invariant added to `insert_resource_by_id` requiring the id to be valid for world
## Migration Guide
- audit any calls to `insert_resource_by_id` making sure that the id is valid for the world
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fixes#5581
## Solution
`Window::scale_factor` already has logic for selecting the overridden or actual scale factor, so use it.
I tested this with the displays I have access to, but more testing would be nice. This seems like a pretty straightforward bug/fix though.
## Changelog
### Fixed
Fixed window centering on high-dpi displays.
# Objective
Fixes#5687
## Solution
Update the methods on the `Entity` struct to be `const`, so we can
define compile-time constants and more generally use them in a const
context.
---
## Changelog
### Added
- Most `Entity` methods are now `const fn`.
# Objective
It's not obvious that the `AssetServerSettings` resource must be added before the `AssetPlugin`.
## Solution
Add a doc comment to this effect.
# Objective
- Reduce debugging burden when using events by telling user when they missed an event.
## Solution
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Fixes#5817.
- Removes std::vec::Vec ambiguities in derive_bundle macro
## Solution
Prepend :: to standard library full Vec qualified type name (::std::vec::Vec)
# Objective
- Document `QueryCombinationIter`
## Solution
- Describe the item, add usage and examples
- Copy notes about the number of query items generated from the corresponding query methods (they will be removed in #5742 ([motivation]))
## Additional notes
- Derived from #4989
[motivation]: https://github.com/bevyengine/bevy/pull/4989#issuecomment-1208421496
# Objective
Right now, users have to implement basic system adapters such as `Option` <-> `Result` conversions by themselves. This is slightly annoying and discourages the use of system chaining.
## Solution
Add the module `system_adapter` to the prelude, which contains a collection of common adapters. This is very ergonomic in practice.
## Examples
Convenient early returning.
```rust
use bevy::prelude::*;
App::new()
// If the system fails, just try again next frame.
.add_system(pet_dog.chain(system_adapter::ignore))
.run();
#[derive(Component)]
struct Dog;
fn pet_dog(dogs: Query<(&Name, Option<&Parent>), With<Dog>>) -> Option<()> {
let (dog, dad) = dogs.iter().next()?;
println!("You pet {dog}. He/she/they are a good boy/girl/pupper.");
let (dad, _) = dogs.get(dad?.get()).ok()?;
println!("Their dad's name is {dad}");
Some(())
}
```
Converting the output of a system
```rust
use bevy::prelude::*;
App::new()
.add_system(
find_name
.chain(system_adapter::new(String::from))
.chain(spawn_with_name),
)
.run();
fn find_name() -> &'static str { /* ... */ }
fn spawn_with_name(In(name): In<String>, mut commands: Commands) {
commands.spawn().insert(Name::new(name));
}
```
---
## Changelog
* Added the module `bevy_ecs::prelude::system_adapter`, which contains a collection of common system chaining adapters.
* `new` - Converts a regular fn to a system adapter.
* `unwrap` - Similar to `Result::unwrap`
* `ignore` - Discards the output of the previous system.
# Objective
- Allow users to change the scaling of the UI
- Adopted from #2808
## Solution
- This is an accessibility feature for fixed-size UI elements, allowing the developer to expose a range of UI scales for the player to set a scale that works for their needs.
> - The user can modify the UiScale struct to change the scaling at runtime. This multiplies the Px values by the scale given, while not touching any others.
> - The example showcases how this even allows for fluid transitions
> Here's how the example looks like:
https://user-images.githubusercontent.com/1631166/132979069-044161a9-8e85-45ab-9e93-fcf8e3852c2b.mp4
---
## Changelog
- Added a `UiScale` which can be used to scale all of UI
Co-authored-by: Andreas Weibye <13300393+Weibye@users.noreply.github.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Help users who are using `load_folder` in wasm builds to find a slightly shorter path to figuring out why their stuff is broken.
## Solution
Adds a warning to `read_directory` in the `WasmAssetIo`.
This is extremely similar to the warning already emitted a few lines below for `watch_for_changes`.
# Objective
Some of the reflection impls for container types had unnecessary `Clone` bounds on their generic arguments. These come from before `FromReflect` when types were instead bound by `Reflect + Clone`. With `FromReflect` this is no longer necessary.
## Solution
Removed all leftover `Clone` bounds from types that use `FromReflect` instead.
## Note
I skipped `Result<T, E>`, `HashSet<T>`, and `Range<T>` since those do not use `FromReflect`. This should probably be handled in a separate PR since it would be a breaking change.
---
## Changelog
- Remove unnecessary `Clone` bounds on reflected containers
# Objective
#5658 made it so that `FromReflect` was used as the bound for `T` in `Option<T>`. However, it did not use this change effectively for the implementation of `Reflect::apply` (it was still using `take`, which would fail for Dynamic types).
Additionally, the changes were not consistent with other methods within the file, such as the ones for `Vec<T>` and `HashMap<K, V>`.
## Solution
Update `Option<T>` to fallback on `FromReflect` if `take` fails, instead of wholly relying on one or the other.
I also chose to update the error messages, as they weren't all too descriptive before.
---
## Changelog
- Use `FromReflect::from_reflect` as a fallback in the `Reflect::apply` implementation for `Option<T>`
# Objective
`SmallVec<T>` was missing a `GetTypeRegistration` impl.
## Solution
Added a `GetTypeRegistration` impl.
---
## Changelog
* Added a `GetTypeRegistration` impl for `SmallVec<T>`
Type registrations were only present for some of the `bevy_math` types, and missing for others. This is a very strange inconsistency, given that they all impl `Reflect` and `FromReflect`. In practice, this means these types cannot be used in scenes.
In particular, this is especially problematic, because `Affine3A` is one of the missing types, and it is now used in `GlobalTransform`. Trying to create a bevy scene that contains `GlobalTransform`s results in an error due to the missing type registration.
# Objective
- While generating https://github.com/jakobhellermann/bevy_reflect_ts_type_export/blob/main/generated/types.ts, I noticed that some types that implement `Reflect` did not register themselves
- `Viewport` isn't reflect but can be (there's a TODO)
## Solution
- register all reflected types
- derive `Reflect` for `Viewport`
## Changelog
- more types are not registered in the type registry
- remove `Serialize`, `Deserialize` impls from `Viewport`
I also decided to remove the `Serialize, Deserialize` from the `Viewport`, since they were (AFAIK) only used for reflection, which now is done without serde. So this is technically a breaking change for people who relied on that impl directly.
Personally I don't think that every bevy type should implement `Serialize, Deserialize`, as that would lead to a ton of code generation that mostly isn't necessary because we can do the same with `Reflect`, but if this is deemed controversial I can remove it from this PR.
## Migration Guide
- `KeyCode` now implements `Reflect` not as `reflect_value`, but with proper struct reflection. The `Serialize` and `Deserialize` impls were removed, now that they are no longer required for scene serialization.
# Objective
Fix a nasty system ordering bug between `update_frusta` and `camera_system` that lead to incorrect frustum s, leading to excessive culling and extremely hard-to-debug visual glitches
## Solution
- add explicit system ordering
# Objective
Very small convenience constructors added to `Size`.
Does not change current examples too much but I'm working on a rather complex UI use-case where this cuts down on some extra typing :)
# Objective
- Fixes#4451
## Solution
- Conditionally compile entity ID cursor as `AtomicI32` when compiling on a platform that does not support 64-bit atomics.
- This effectively raises the MSRV to 1.60 as it uses a `#[cfg]` that was only just stabilized there. (should this be noted in changelog?)
---
## Changelog
- Added `bevy_ecs` support for platforms without 64-bit atomic ints
## Migration Guide
N/A
# Objective
- Morten Mikkelsen clarified that the world normal and tangent must be normalized in the vertex stage and the interpolated values must not be normalized in the fragment stage. This is in order to match the mikktspace approach exactly.
- Fixes#5514 by ensuring the tangent basis matrix (TBN) is orthonormal
## Solution
- Normalize the world normal in the vertex stage and not the fragment stage
- Normalize the world tangent xyz in the vertex stage
- Take into account the sign of the determinant of the local to world matrix when calculating the bitangent
---
## Changelog
- Fixed - scaling a model that uses normal mapping now has correct lighting again
# Objective
- Fixes#5365
- The `assert!()` when the resource from `World::resource_scope` is inserted into the world is not descriptive.
## Solution
- Add more context to the assert inside of `World::resource_scope` when the `FnOnce` param inserts the resource.
# Objective
`FromReflect` is a commonly used component to the Reflect API. It's required as a bound for reflecting things like `Vec<T>` and `HashMap<K, V>` and is generally useful (if not necessary) to derive on most structs or enums.
Currently, however, it is not exported in `bevy_reflect`'s prelude. This means a module that uses `bevy_reflect` might have the following two lines:
```rust
use bevy_reflect::prelude::*;
use bevy_reflect::FromReflect;
```
Additionally, users of the full engine might need to put:
```rust
use bevy::prelude::*;
use bevy::reflect::FromReflect;
```
## Solution
Add `FromReflect` to the prelude of `bevy_reflect`.
---
## Changelog
- Added `FromReflect` to the prelude of `bevy_reflect`
# Objective
- Similar to `SystemChangeTick`, probably somewhat useful for debugging messages.
---
## Changelog
- Added `SystemName` which copies the `SystemMeta::name` field so it can be accessed within a system.
Probably a copy-paste error, but `Add<Color>` and `AddAssign<Color>` should use `rhs.as_hlsa_f32()` instead of `rhs.as_linear_rgba_f32()` when the LHS is a `Color::Hsla`. Fixes#5543.
Co-authored-by: Verte <105466627+vertesians@users.noreply.github.com>
# Objective
The reflection impls on `Option<T>` have the bound `T: Reflect + Clone`. This means that using `FromReflect` requires `Clone` even though we can normally get away with just `FromReflect`.
## Solution
Update the bounds on `Option<T>` to match that of `Vec<T>`, where `T: FromReflect`.
This helps remove a `Clone` implementation that may be undesired but added for the sole purpose of getting the code to compile.
---
## Changelog
* Reflection on `Option<T>` now has `T` bound by `FromReflect` rather than `Reflect + Clone`
* Added a `FromReflect` impl for `Instant`
## Migration Guide
If using `Option<T>` with Bevy's reflection API, `T` now needs to implement `FromReflect` rather than just `Clone`. This can be achieved easily by simply deriving `FromReflect`:
```rust
// OLD
#[derive(Reflect, Clone)]
struct Foo;
let reflected: Box<dyn Reflect> = Box::new(Some(Foo));
// NEW
#[derive(Reflect, FromReflect)]
struct Foo;
let reflected: Box<dyn Reflect> = Box::new(Some(Foo));
```
> Note: You can still derive `Clone`, but it's not required in order to compile.
# Objective
Rust 1.63 resolved [an issue](https://github.com/rust-lang/rust/issues/83701) that prevents you from combining explicit generic arguments with `impl Trait` arguments.
Now, we no longer need to use dynamic dispatch to work around this.
## Migration Guide
The methods `Schedule::get_stage` and `get_stage_mut` now accept `impl StageLabel` instead of `&dyn StageLabel`.
### Before
```rust
let stage = schedule.get_stage_mut::<SystemStage>(&MyLabel)?;
```
### After
```rust
let stage = schedule.get_stage_mut::<SystemStage>(MyLabel)?;
```
# Objective
This PR changes it possible to use vertex colors without a texture using the bevy_sprite ColorMaterial.
Fixes#5679
## Solution
- Made multiplication of the output color independent of the COLOR_MATERIAL_FLAGS_TEXTURE_BIT bit
- Extended mesh2d_vertex_color_texture example to show off both vertex colors and tinting
Not sure if extending the existing example was the right call but it seems to be reasonable to me.
I couldn't find any tests for the shaders and I think adding shader testing would be beyond the scope of this PR. So no tests in this PR. 😬
Co-authored-by: Jonas Wagner <jonas@29a.ch>
# Objective
While poking around the hierarchy code, I wondered why some asserts in tests were duplicated.
Some git blame later, I found out that commit ( 8eb0440f1e ) added already existing asserts while removing others.
## Solution
Remove the duplicated asserts.
# Objective
When an invalid attribute is inserted and the LogPlugin is not enabled the full error is not printed which means makes it hard to diagnose.
## Solution
- Always print the full message in the panic.
## Notes
I originally had a separate error log because I wanted to make it clearer for users, but this is probably causing more issues than necessary.
# Objective
Remove unused `enum DepthCalculation` and its usages. This was used to compute visible entities in the [old renderer](db665b96c0/crates/bevy_render/src/camera/visible_entities.rs), but is now unused.
## Solution
`sed 's/DepthCalculation//g'`
---
## Changelog
### Changed
Removed `bevy_render:📷:DepthCalculation`.
## Migration Guide
Remove references to `bevy_render:📷:DepthCalculation`, such as `use bevy_render:📷:DepthCalculation`. Remove `depth_calculation` fields from Projections.
# Objective
Make CI pass on bevy main.
Update to rust-1.63, updated clippy to 1.63 which introduced the following enhancements:
- [undocumented_unsafe_blocks](https://rust-lang.github.io/rust-clippy/master/index.html#undocumented_unsafe_blocks): Now also lints on unsafe trait implementations
This caught two incorrectly written ( but existing) safety comments for unsafe traits.
## Solution
Fix the comment to use `SAFETY:`
# Objective
While trying out the lint `unsafe_op_in_unsafe_fn` I noticed that `insert_resource_by_id` didn't drop the old value if it already existed, and reimplemented `Column::replace` manually for no apparent reason.
## Solution
- use `Column::replace` and add a test expecting the correct drop count
---
## Changelog
- `World::insert_resource_by_id` will now correctly drop the old resource value, if one already existed
# Objective
- The `Display` impl for `ReflectPathError` is pretty unspecific (e.g. `the current struct doesn't have a field with the given name`
- it has info for better messages available
## Solution
- make the display impl more descriptive by including values from the type
# Objective
- `ReflectMut` served no purpose that wasn't met by `Mut<dyn Reflect>` which is easier to understand since you have to deal with fewer types
- there is another `ReflectMut` type that could be confused with this one
## Solution/Changelog
- relax `T: ?Sized` bound in `Mut<T>`
- replace all instances of `ReflectMut` with `Mut<dyn Reflect>`
# Objective
Provide a safe API to access an `EntityMut`'s `World`.
## Solution
* Add `EntityMut::into_world_mut` for safe access to the entity's world.
---
## Changelog
* Add `EntityMut::into_world_mut` for safe access to the entity's world.
# Objective
`ShaderData` is marked as public, but is an internal type only used by one other
internal type, so it should be made private.
## Solution
`ShaderData` is only used in `ShaderCache`, and the latter is private,
so there is no need to make the former public. This change removes the
`pub` keyword from `ShaderData`, hidding it as the implementation detail
it is.
Split from #5600
