# Objective
- It's possible to have errors in a draw command, but these errors are
ignored
## Solution
- Return a result with the error
## Changelog
Renamed `RenderCommandResult::Failure` to `RenderCommandResult::Skip`
Added a `reason` string parameter to `RenderCommandResult::Failure`
## Migration Guide
If you were using `RenderCommandResult::Failure` to just ignore an error
and retry later, use `RenderCommandResult::Skip` instead.
This wasn't intentional, but this PR should also help with
https://github.com/bevyengine/bevy/issues/12660 since we can turn a few
unwraps into error messages now.
---------
Co-authored-by: Charlotte McElwain <charlotte.c.mcelwain@gmail.com>
The "uberbuffers" PR #14257 caused some examples to fail intermittently
for different reasons:
1. `morph_targets` could fail because vertex displacements for morph
targets are keyed off the vertex index. With buffer packing, the vertex
index can vary based on the position in the buffer, which caused the
morph targets to be potentially incorrect. The solution is to include
the first vertex index with the `MeshUniform` (and `MeshInputUniform` if
GPU preprocessing is in use), so that the shader can calculate the true
vertex index before performing the morph operation. This results in
wasted space in `MeshUniform`, which is unfortunate, but we'll soon be
filling in the padding with the ID of the material when bindless
textures land, so this had to happen sooner or later anyhow.
Including the vertex index in the `MeshInputUniform` caused an ordering
problem. The `MeshInputUniform` was created during the extraction phase,
before the allocations occurred, so the extraction logic didn't know
where the mesh vertex data was going to end up. The solution is to move
the `MeshInputUniform` creation (the `collect_meshes_for_gpu_building`
system) to after the allocations phase. This should be better for
parallelism anyhow, because it allows the extraction phase to finish
quicker. It's also something we'll have to do for bindless in any event.
2. The `lines` and `fog_volumes` examples could fail because their
custom drawing nodes weren't updated to supply the vertex and index
offsets in their `draw_indexed` and `draw` calls. This commit fixes this
oversight.
Fixes#14366.
Switches `Msaa` from being a globally configured resource to a per
camera view component.
Closes#7194
# Objective
Allow individual views to describe their own MSAA settings. For example,
when rendering to different windows or to different parts of the same
view.
## Solution
Make `Msaa` a component that is required on all camera bundles.
## Testing
Ran a variety of examples to ensure that nothing broke.
TODO:
- [ ] Make sure android still works per previous comment in
`extract_windows`.
---
## Migration Guide
`Msaa` is no longer configured as a global resource, and should be
specified on each spawned camera if a non-default setting is desired.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
- Fixes: https://github.com/bevyengine/bevy/issues/14036
## Solution
- Add a world space transformation for the environment sample direction.
## Testing
- I have tested the newly added `transform` field using the newly added
`rotate_environment_map` example.
https://github.com/user-attachments/assets/2de77c65-14bc-48ee-b76a-fb4e9782dbdb
## Migration Guide
- Since we have added a new filed to the `EnvironmentMapLight` struct,
users will need to include `..default()` or some rotation value in their
initialization code.
This commit uses the [`offset-allocator`] crate to combine vertex and
index arrays from different meshes into single buffers. Since the
primary source of `wgpu` overhead is from validation and synchronization
when switching buffers, this significantly improves Bevy's rendering
performance on many scenes.
This patch is a more flexible version of #13218, which also used slabs.
Unlike #13218, which used slabs of a fixed size, this commit implements
slabs that start small and can grow. In addition to reducing memory
usage, supporting slab growth reduces the number of vertex and index
buffer switches that need to happen during rendering, leading to
improved performance. To prevent pathological fragmentation behavior,
slabs are capped to a maximum size, and mesh arrays that are too large
get their own dedicated slabs.
As an additional improvement over #13218, this commit allows the
application to customize all allocator heuristics. The
`MeshAllocatorSettings` resource contains values that adjust the minimum
and maximum slab sizes, the cutoff point at which meshes get their own
dedicated slabs, and the rate at which slabs grow. Hopefully-sensible
defaults have been chosen for each value.
Unfortunately, WebGL 2 doesn't support the *base vertex* feature, which
is necessary to pack vertex arrays from different meshes into the same
buffer. `wgpu` represents this restriction as the downlevel flag
`BASE_VERTEX`. This patch detects that bit and ensures that all vertex
buffers get dedicated slabs on that platform. Even on WebGL 2, though,
we can combine all *index* arrays into single buffers to reduce buffer
changes, and we do so.
The following measurements are on Bistro:
Overall frame time improves from 8.74 ms to 5.53 ms (1.58x speedup):
Render system time improves from 6.57 ms to 3.54 ms (1.86x speedup):
Opaque pass time improves from 4.64 ms to 2.33 ms (1.99x speedup):
## Migration Guide
### Changed
* Vertex and index buffers for meshes may now be packed alongside other
buffers, for performance.
* `GpuMesh` has been renamed to `RenderMesh`, to reflect the fact that
it no longer directly stores handles to GPU objects.
* Because meshes no longer have their own vertex and index buffers, the
responsibility for the buffers has moved from `GpuMesh` (now called
`RenderMesh`) to the `MeshAllocator` resource. To access the vertex data
for a mesh, use `MeshAllocator::mesh_vertex_slice`. To access the index
data for a mesh, use `MeshAllocator::mesh_index_slice`.
[`offset-allocator`]: https://github.com/pcwalton/offset-allocator
Currently, volumetric fog is global and affects the entire scene
uniformly. This is inadequate for many use cases, such as local smoke
effects. To address this problem, this commit introduces *fog volumes*,
which are axis-aligned bounding boxes (AABBs) that specify fog
parameters inside their boundaries. Such volumes can also specify a
*density texture*, a 3D texture of voxels that specifies the density of
the fog at each point.
To create a fog volume, add a `FogVolume` component to an entity (which
is included in the new `FogVolumeBundle` convenience bundle). Like light
probes, a fog volume is conceptually a 1×1×1 cube centered on the
origin; a transform can be used to position and resize this region. Many
of the fields on the existing `VolumetricFogSettings` have migrated to
the new `FogVolume` component. `VolumetricFogSettings` on a camera is
still needed to enable volumetric fog. However, by itself
`VolumetricFogSettings` is no longer sufficient to enable volumetric
fog; a `FogVolume` must be present. Applications that wish to retain the
old global fog behavior can simply surround the scene with a large fog
volume.
By way of implementation, this commit converts the volumetric fog shader
from a full-screen shader to one applied to a mesh. The strategy is
different depending on whether the camera is inside or outside the fog
volume. If the camera is inside the fog volume, the mesh is simply a
plane scaled to the viewport, effectively falling back to a full-screen
pass. If the camera is outside the fog volume, the mesh is a cube
transformed to coincide with the boundaries of the fog volume's AABB.
Importantly, in the latter case, only the front faces of the cuboid are
rendered. Instead of treating the boundaries of the fog as a sphere
centered on the camera position, as we did prior to this patch, we
raytrace the far planes of the AABB to determine the portion of each ray
contained within the fog volume. We then raymarch in shadow map space as
usual. If a density texture is present, we modulate the fixed density
value with the trilinearly-interpolated value from that texture.
Furthermore, this patch introduces optional jitter to fog volumes,
intended for use with TAA. This modifies the position of the ray from
frame to frame using interleaved gradient noise, in order to reduce
aliasing artifacts. Many implementations of volumetric fog in games use
this technique. Note that this patch makes no attempt to write a motion
vector; this is because when a view ray intersects multiple voxels
there's no single direction of motion. Consequently, fog volumes can
have ghosting artifacts, but because fog is "ghostly" by its nature,
these artifacts are less objectionable than they would be for opaque
objects.
A new example, `fog_volumes`, has been added. It demonstrates a single
fog volume containing a voxelized representation of the Stanford bunny.
The existing `volumetric_fog` example has been updated to use the new
local volumetrics API.
## Changelog
### Added
* Local `FogVolume`s are now supported, to localize fog to specific
regions. They can optionally have 3D density voxel textures for precise
control over the distribution of the fog.
### Changed
* `VolumetricFogSettings` on a camera no longer enables volumetric fog;
instead, it simply enables the processing of `FogVolume`s within the
scene.
## Migration Guide
* A `FogVolume` is now necessary in order to enable volumetric fog, in
addition to `VolumetricFogSettings` on the camera. Existing uses of
volumetric fog can be migrated by placing a large `FogVolume`
surrounding the scene.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François Mockers <mockersf@gmail.com>
# Objective
- Using bincode to deserialize binary into a MeshletMesh is expensive
(~77ms for a 5mb file).
## Solution
- Write a custom deserializer using bytemuck's Pod types and slice
casting.
- Total asset load time has gone from ~102ms to ~12ms.
- Change some types I never meant to be public to private and other misc
cleanup.
## Testing
- Ran the meshlet example and added timing spans to the asset loader.
---
## Changelog
- Improved `MeshletMesh` loading speed
- The `MeshletMesh` disk format has changed, and
`MESHLET_MESH_ASSET_VERSION` has been bumped
- `MeshletMesh` fields are now private
- Renamed `MeshletMeshSaverLoad` to `MeshletMeshSaverLoader`
- The `Meshlet`, `MeshletBoundingSpheres`, and `MeshletBoundingSphere`
types are now private
- Removed `MeshletMeshSaveOrLoadError::SerializationOrDeserialization`
- Added `MeshletMeshSaveOrLoadError::WrongFileType`
## Migration Guide
- Regenerate your `MeshletMesh` assets, as the disk format has changed,
and `MESHLET_MESH_ASSET_VERSION` has been bumped
- `MeshletMesh` fields are now private
- `MeshletMeshSaverLoad` is now named `MeshletMeshSaverLoader`
- The `Meshlet`, `MeshletBoundingSpheres`, and `MeshletBoundingSphere`
types are now private
- `MeshletMeshSaveOrLoadError::SerializationOrDeserialization` has been
removed
- Added `MeshletMeshSaveOrLoadError::WrongFileType`, match on this
variant if you match on `MeshletMeshSaveOrLoadError`
# Objective
- After #11804 , The queue_prepass_material_meshes function is now
executed in parallel with other queue_* systems. This optimization
introduced a potential issue where mesh_instance.should_batch() could
return false in queue_prepass_material_meshes due to an unset
material_bind_group_id.
# Objective
- After #13894, I noticed the performance of `many_lights `dropped from
120+ to 60+. I reviewed the PR but couldn't identify any mistakes. After
profiling, I discovered that `Hashmap::Clone `was very slow when its not
empty, causing `extract_light` to increase from 3ms to 8ms.
- Lighting only checks visibility for 3D Meshes. We don't need to
maintain a TypeIdMap for this, as it not only impacts performance
negatively but also reduces ergonomics.
## Solution
- use VisibleMeshEntities for lighint visibility checking.
## Performance
cargo run --release --example many_lights --features bevy/trace_tracy
name="bevy_pbr::light::check_point_light_mesh_visibility"}
system{name="bevy_pbr::render::light::extract_lights"}
## Migration Guide
> now `SpotLightBundle` , `CascadesVisibleEntities `and
`CubemapVisibleEntities `use VisibleMeshEntities instead of
`VisibleEntities`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Bevy currently has lot of invalid intra-doc links, let's fix them!
- Also make CI test them, to avoid future regressions.
- Helps with #1983 (but doesn't fix it, as there could still be explicit
links to docs.rs that are broken)
## Solution
- Make `cargo r -p ci -- doc-check` check fail on warnings (could also
be changed to just some specific lints)
- Manually fix all the warnings (note that in some cases it was unclear
to me what the fix should have been, I'll try to highlight them in a
self-review)
Bump version after release
This PR has been auto-generated
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François Mockers <mockersf@gmail.com>
# Objective
Both `Material` and `MaterialExtension` (base and extension) can derive
Debug, so there's no reason to not allow `ExtendedMaterial` to derive it
## Solution
- Describe the solution used to achieve the objective above.
Add `Debug` to the list of derived traits
## Testing
- Did you test these changes? If so, how?
I compiled my test project on latest commit, making sure it actually
compiles
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
Create an ExtendedMaterial instance, try to `println!("{:?}",
material);`
Co-authored-by: NWPlayer123 <NWPlayer123@users.noreply.github.com>
# Objective
- Standard Material is starting to run out of samplers (currently uses
13 with no additional features off, I think in 0.13 it was 12).
- This change adds a new feature switch, modelled on the other ones
which add features to Standard Material, to turn off the new anisotropy
feature by default.
## Solution
- feature + texture define
## Testing
- Anisotropy example still works fine
- Other samples work fine
- Standard Material now takes 12 samplers by default on my Mac instead
of 13
## Migration Guide
- Add feature pbr_anisotropy_texture if you are using that texture in
any standard materials.
---------
Co-authored-by: John Payne <20407779+johngpayne@users.noreply.github.com>
# Objective
The `AssetReader` trait allows customizing the behavior of fetching
bytes for an `AssetPath`, and expects implementors to return `dyn
AsyncRead + AsyncSeek`. This gives implementors of `AssetLoader` great
flexibility to tightly integrate their asset loading behavior with the
asynchronous task system.
However, almost all implementors of `AssetLoader` don't use the async
functionality at all, and just call `AsyncReadExt::read_to_end(&mut
Vec<u8>)`. This is incredibly inefficient, as this method repeatedly
calls `poll_read` on the trait object, filling the vector 32 bytes at a
time. At my work we have assets that are hundreds of megabytes which
makes this a meaningful overhead.
## Solution
Turn the `Reader` type alias into an actual trait, with a provided
method `read_to_end`. This provided method should be more efficient than
the existing extension method, as the compiler will know the underlying
type of `Reader` when generating this function, which removes the
repeated dynamic dispatches and allows the compiler to make further
optimizations after inlining. Individual implementors are able to
override the provided implementation -- for simple asset readers that
just copy bytes from one buffer to another, this allows removing a large
amount of overhead from the provided implementation.
Now that `Reader` is an actual trait, I also improved the ergonomics for
implementing `AssetReader`. Currently, implementors are expected to box
their reader and return it as a trait object, which adds unnecessary
boilerplate to implementations. This PR changes that trait method to
return a pseudo trait alias, which allows implementors to return `impl
Reader` instead of `Box<dyn Reader>`. Now, the boilerplate for boxing
occurs in `ErasedAssetReader`.
## Testing
I made identical changes to my company's fork of bevy. Our app, which
makes heavy use of `read_to_end` for asset loading, still worked
properly after this. I am not aware if we have a more systematic way of
testing asset loading for correctness.
---
## Migration Guide
The trait method `bevy_asset::io::AssetReader::read` (and `read_meta`)
now return an opaque type instead of a boxed trait object. Implementors
of these methods should change the type signatures appropriately
```rust
impl AssetReader for MyReader {
// Before
async fn read<'a>(&'a self, path: &'a Path) -> Result<Box<Reader<'a>>, AssetReaderError> {
let reader = // construct a reader
Box::new(reader) as Box<Reader<'a>>
}
// After
async fn read<'a>(&'a self, path: &'a Path) -> Result<impl Reader + 'a, AssetReaderError> {
// create a reader
}
}
```
`bevy::asset::io::Reader` is now a trait, rather than a type alias for a
trait object. Implementors of `AssetLoader::load` will need to adjust
the method signature accordingly
```rust
impl AssetLoader for MyLoader {
async fn load<'a>(
&'a self,
// Before:
reader: &'a mut bevy::asset::io::Reader,
// After:
reader: &'a mut dyn bevy::asset::io::Reader,
_: &'a Self::Settings,
load_context: &'a mut LoadContext<'_>,
) -> Result<Self::Asset, Self::Error> {
}
```
Additionally, implementors of `AssetReader` that return a type
implementing `futures_io::AsyncRead` and `AsyncSeek` might need to
explicitly implement `bevy::asset::io::Reader` for that type.
```rust
impl bevy::asset::io::Reader for MyAsyncReadAndSeek {}
```
# Objective
- Fixes#14059
- `morphed_skinned_mesh_layout` is the same as
`morphed_skinned_motion_mesh_layout` but shouldn't have the skin / morph
from previous frame, as they're used for motion
## Solution
- Remove the extra entries
## Testing
- Run with the glTF file reproducing #14059, it works
As reported in #14004, many third-party plugins, such as Hanabi, enqueue
entities that don't have meshes into render phases. However, the
introduction of indirect mode added a dependency on mesh-specific data,
breaking this workflow. This is because GPU preprocessing requires that
the render phases manage indirect draw parameters, which don't apply to
objects that aren't meshes. The existing code skips over binned entities
that don't have indirect draw parameters, which causes the rendering to
be skipped for such objects.
To support this workflow, this commit adds a new field,
`non_mesh_items`, to `BinnedRenderPhase`. This field contains a simple
list of (bin key, entity) pairs. After drawing batchable and unbatchable
objects, the non-mesh items are drawn one after another. Bevy itself
doesn't enqueue any items into this list; it exists solely for the
application and/or plugins to use.
Additionally, this commit switches the asset ID in the standard bin keys
to be an untyped asset ID rather than that of a mesh. This allows more
flexibility, allowing bins to be keyed off any type of asset.
This patch adds a new example, `custom_phase_item`, which simultaneously
serves to demonstrate how to use this new feature and to act as a
regression test so this doesn't break again.
Fixes#14004.
## Changelog
### Added
* `BinnedRenderPhase` now contains a `non_mesh_items` field for plugins
to add custom items to.
The comment was incorrect - we are already looking at the pyramid
texture so we do not need to transform the size in any way. Doing that
resulted in a mip that was too fine to be selected in certain cases,
which resulted in a 2x2 pixel footprint not actually fully covering the
cluster sphere - sometimes this could lead to a non-conservative depth
value being computed which resulted in the cluster being marked as
invisible incorrectly.
This change updates meshopt-rs to 0.3 to take advantage of the newly
added sparse simplification mode: by default, simplifier assumes that
the entire mesh is simplified and runs a set of calculations that are
O(vertex count), but in our case we simplify many small mesh subsets
which is inefficient.
Sparse mode instead assumes that the simplified subset is only using a
portion of the vertex buffer, and optimizes accordingly. This changes
the meaning of the error (as it becomes relative to the subset, in our
case a meshlet group); to ensure consistent error selection, we also use
the ErrorAbsolute mode which allows us to operate in mesh coordinate
space.
Additionally, meshopt 0.3 runs optimizeMeshlet automatically as part of
`build_meshlets` so we no longer need to call it ourselves.
This reduces the time to build meshlet representation for Stanford Bunny
mesh from ~1.65s to ~0.45s (3.7x) in optimized builds.
# Objective
- Second part of #13900
- based on #13905
## Solution
- check_dir_light_mesh_visibility defers setting the entity's
`ViewVisibility `so that Bevy can schedule it to run in parallel with
`check_point_light_mesh_visibility`.
- Reduce HashMap lookups for directional light checking as much as
possible
- Use `par_iter `to parallelize the checking process within each system.
---------
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
# Objective
- Fixes#13728
## Solution
- add a new feature `smaa_luts`. if enables, it also enables `ktx2` and
`zstd`. if not, it doesn't load the files but use placeholders instead
- adds all the resources needed in the same places that system that uses
them are added.
# Objective
- Fixes#13811 (probably, I lost my test code...)
## Solution
- Turns out that Queue and PrepareAssets are _not_ ordered. We should
probably either rethink our system sets (again), or improve the
documentation here. For reference, I've included the current ordering
below.
- The `prepare_meshlet_meshes_X` systems need to run after
`prepare_assets::<PreparedMaterial<M>>`, and have also been moved to
QueueMeshes.
```rust
schedule.configure_sets(
(
ExtractCommands,
ManageViews,
Queue,
PhaseSort,
Prepare,
Render,
Cleanup,
)
.chain(),
);
schedule.configure_sets((ExtractCommands, PrepareAssets, Prepare).chain());
schedule.configure_sets(QueueMeshes.in_set(Queue).after(prepare_assets::<GpuMesh>));
schedule.configure_sets(
(PrepareResources, PrepareResourcesFlush, PrepareBindGroups)
.chain()
.in_set(Prepare),
);
```
## Testing
- Ambiguity checker to make sure I don't have ambiguous system ordering
* Fixes https://github.com/bevyengine/bevy/issues/13813
* Fixes https://github.com/bevyengine/bevy/issues/13810
Tested a combined scene with both regular meshes and meshlet meshes
with:
* Regular forward setup
* Forward + normal/motion vector prepasses
* Deferred (with depth prepass since that's required)
* Deferred + depth/normal/motion vector prepasses
Still broken:
* Using meshlet meshes rendering in deferred and regular meshes
rendering in forward + depth/normal prepass. I don't know how to fix
this at the moment, so for now I've just add instructions to not mix
them.
This is a followup to https://github.com/bevyengine/bevy/pull/13904
based on the discussion there, and switches two HashMaps that used
meshlet ids as keys to Vec.
In addition to a small further performance boost for `from_mesh` (1.66s
=> 1.60s), this makes processing deterministic modulo threading issues
wrt CRT rand described in the linked PR. This is valuable for debugging,
as you can visually or programmatically inspect the meshlet distribution
before/after making changes that should not change the output, whereas
previously every asset rebuild would change the meshlet structure.
Tested with https://github.com/bevyengine/bevy/pull/13431; after this
change, the visual output of meshlets is consistent between asset
rebuilds, and the MD5 of the output GLB file does not change either,
which was not the case before.
# Objective
- Fixes#11933.
- Related: #12280.
## Solution
- Specify that, after applying `AmbientLight`, the resulting units are
in cd/m^2.
- This is based on [@fintelia's
comment](https://github.com/bevyengine/bevy/issues/11933#issuecomment-1995427587),
and will need to be verified.
---
## Changelog
- Specified units for `AmbientLight`'s `brightness` field.
This change reworks `find_connected_meshlets` to scale more linearly
with the mesh size, which significantly reduces the cost of building
meshlet representations. As a small extra complexity reduction, it moves
`simplify_scale` call out of the loop so that it's called once (it only
depends on the vertex data => is safe to cache).
The new implementation of connectivity analysis builds edge=>meshlet
list data structure, which allows us to only iterate through
`tuple_combinations` of a (usually) small list. There is still some
redundancy as if two meshlets share two edges, they will be represented
in the meshlet lists twice, but it's overall much faster.
Since the hash traversal is non-deterministic, to keep this part of the
algorithm deterministic for reproducible results we sort the output
adjacency lists.
Overall this reduces the time to process bunny mesh from ~4.2s to ~1.7s
when using release; in unoptimized builds the delta is even more
significant.
This was tested by using https://github.com/bevyengine/bevy/pull/13431
and:
a) comparing the result of `find_connected_meshlets` using old and new
code; they are equal in all steps of the clustering process
b) comparing the rendered result of the old code vs new code *after*
making the rest of the algorithm deterministic: right now the loop that
iterates through the result of `group_meshlets()` call executes in
different order between program runs. This is orthogonal to this change
and can be fixed separately.
Note: a future change can shrink the processing time further from ~1.7s
to ~0.4s with a small diff but that requires an update to meshopt crate
which is pending in https://github.com/gwihlidal/meshopt-rs/pull/42.
This change is independent.
# Objective
- first part of #13900
## Solution
- split `check_light_mesh_visibility `into
`check_dir_light_mesh_visibility `and
`check_point_light_mesh_visibility` for better review
# Objective
- After #12582 , Bevy split visibleEntities into a TypeIdMap for
different types of entities, but the behavior in
`check_light_mesh_visibility `simply calls HashMap::clear(), which will
reallocate memory every frame.
## Testing
cargo run --release --example many_cubes --features bevy/trace_tracy --
--shadows
~10% win in `check_light_mesh_visibilty`
# Objective
Closes#13738
## Solution
Added `from_color` to materials that would support it. Didn't add
`from_color` to `WireframeMaterial` as it doesn't seem we expect users
to be constructing them themselves.
## Testing
None
---
## Changelog
### Added
- `from_color` to `StandardMaterial` so you can construct this material
from any color type.
- `from_color` to `ColorMaterial` so you can construct this material
from any color type.
# Objective
- Mikktspace requires that we normalize world normals/tangents _before_
interpolation across vertices, and then do _not_ normalize after. I had
it backwards.
- We do not (am not supposed to?) need a second set of barycentrics for
motion vectors. If you think about the typical raster pipeline, in the
vertex shader we calculate previous_world_position, and then it gets
interpolated using the current triangle's barycentrics.
## Solution
- Fix normal/tangent processing
- Reuse barycentrics for motion vector calculations
- Not implementing this for 0.14, but long term I aim to remove explicit
vertex tangents and calculate them in the shader on the fly.
## Testing
- I tested out some of the normal maps we have in repo. Didn't seem to
make a difference, but mikktspace is all about correctness across
various baking tools. I probably just didn't have any of the ones that
would cause it to break.
- Didn't test motion vectors as there's a known bug with the depth
buffer and meshlets that I'm waiting on the render graph rewrite to fix.
# Objective
- If the fog is disabled it still generates a useless branch which can
hurt performance
## Solution
- Make the flag a shader_def instead
## Testing
- I tested enabling/disabling fog works as expected per-material in the
fog example
- I also tested that scenes that don't add the FogSettings resource
still work correctly
## Review notes
I'm not sure how to handle the removed material flag. Right now I just
commented it out and added a not to reuse it instead of creating a new
one.
# Objective
One thing missing from the new Color implementation in 0.14 is the
ability to easily convert to a u8 representation of the rgb color.
(note this is a redo of PR https://github.com/bevyengine/bevy/pull/13739
as I needed to move the source branch
## Solution
I have added to_u8_array and to_u8_array_no_alpha to a new trait called
ColorToPacked to mirror the f32 conversions in ColorToComponents and
implemented the new trait for Srgba and LinearRgba.
To go with those I also added matching from_u8... functions and
converted a couple of cases that used ad-hoc implementations of that
conversion to use these.
After discussion on Discord of the experience of using the API I renamed
Color::linear to Color::to_linear, as without that it looks like a
constructor (like Color::rgb).
I also added to_srgba which is the other commonly converted to type of
color (for UI and 2D) to match to_linear.
Removed a redundant extra implementation of to_f32_array for LinearColor
as it is also supplied in ColorToComponents (I'm surprised that's
allowed?)
## Testing
Ran all tests and manually tested.
Added to_and_from_u8 to linear_rgba::tests
## Changelog
visible change is Color::linear becomes Color::to_linear.
---------
Co-authored-by: John Payne <20407779+johngpayne@users.noreply.github.com>
# Objective
- apply_normal_mapping was changed to use TBN but the pbr_prepass was
not updated for that change
## Solution
- Update the pbr_prepass to correctly apply normal mapping
* Rename cull_meshlets -> cull_clusters
* Rename meshlet_visible -> cluster_visible
* Add an if statement around meshlet_second_pass_candidates writes,
maybe a small bit of performance.
We want to use the clustering infrastructure for light probes and decals
as well, not just point lights. This patch builds on top of #13640 and
performs the rename.
To make this series easier to review, this patch makes no code changes.
Only identifiers and comments are modified.
## Migration Guide
* In the PBR shaders, `point_lights` is now known as
`clusterable_objects`, `PointLight` is now known as `ClusterableObject`,
and `cluster_light_index_lists` is now known as
`clusterable_object_index_lists`.
This commit implements support for physically-based anisotropy in Bevy's
`StandardMaterial`, following the specification for the
[`KHR_materials_anisotropy`] glTF extension.
[*Anisotropy*] (not to be confused with [anisotropic filtering]) is a
PBR feature that allows roughness to vary along the tangent and
bitangent directions of a mesh. In effect, this causes the specular
light to stretch out into lines instead of a round lobe. This is useful
for modeling brushed metal, hair, and similar surfaces. Support for
anisotropy is a common feature in major game and graphics engines;
Unity, Unreal, Godot, three.js, and Blender all support it to varying
degrees.
Two new parameters have been added to `StandardMaterial`:
`anisotropy_strength` and `anisotropy_rotation`. Anisotropy strength,
which ranges from 0 to 1, represents how much the roughness differs
between the tangent and the bitangent of the mesh. In effect, it
controls how stretched the specular highlight is. Anisotropy rotation
allows the roughness direction to differ from the tangent of the model.
In addition to these two fixed parameters, an *anisotropy texture* can
be supplied. Such a texture should be a 3-channel RGB texture, where the
red and green values specify a direction vector using the same
conventions as a normal map ([0, 1] color values map to [-1, 1] vector
values), and the the blue value represents the strength. This matches
the format that the [`KHR_materials_anisotropy`] specification requires.
Such textures should be loaded as linear and not sRGB. Note that this
texture does consume one additional texture binding in the standard
material shader.
The glTF loader has been updated to properly parse the
`KHR_materials_anisotropy` extension.
A new example, `anisotropy`, has been added. This example loads and
displays the barn lamp example from the [`glTF-Sample-Assets`]
repository. Note that the textures were rather large, so I shrunk them
down and converted them to a mixture of JPEG and KTX2 format, in the
interests of saving space in the Bevy repository.
[*Anisotropy*]:
https://google.github.io/filament/Filament.md.html#materialsystem/anisotropicmodel
[anisotropic filtering]:
https://en.wikipedia.org/wiki/Anisotropic_filtering
[`KHR_materials_anisotropy`]:
https://github.com/KhronosGroup/glTF/blob/main/extensions/2.0/Khronos/KHR_materials_anisotropy/README.md
[`glTF-Sample-Assets`]:
https://github.com/KhronosGroup/glTF-Sample-Assets/
## Changelog
### Added
* Physically-based anisotropy is now available for materials, which
enhances the look of surfaces such as brushed metal or hair. glTF scenes
can use the new feature with the `KHR_materials_anisotropy` extension.
## Screenshots
With anisotropy:
Without anisotropy:
# Objective
- Fixes#10909
- Fixes#8492
## Solution
- Name all matrices `x_from_y`, for example `world_from_view`.
## Testing
- I've tested most of the 3D examples. The `lighting` example
particularly should hit a lot of the changes and appears to run fine.
---
## Changelog
- Renamed matrices across the engine to follow a `y_from_x` naming,
making the space conversion more obvious.
## Migration Guide
- `Frustum`'s `from_view_projection`, `from_view_projection_custom_far`
and `from_view_projection_no_far` were renamed to
`from_clip_from_world`, `from_clip_from_world_custom_far` and
`from_clip_from_world_no_far`.
- `ComputedCameraValues::projection_matrix` was renamed to
`clip_from_view`.
- `CameraProjection::get_projection_matrix` was renamed to
`get_clip_from_view` (this affects implementations on `Projection`,
`PerspectiveProjection` and `OrthographicProjection`).
- `ViewRangefinder3d::from_view_matrix` was renamed to
`from_world_from_view`.
- `PreviousViewData`'s members were renamed to `view_from_world` and
`clip_from_world`.
- `ExtractedView`'s `projection`, `transform` and `view_projection` were
renamed to `clip_from_view`, `world_from_view` and `clip_from_world`.
- `ViewUniform`'s `view_proj`, `unjittered_view_proj`,
`inverse_view_proj`, `view`, `inverse_view`, `projection` and
`inverse_projection` were renamed to `clip_from_world`,
`unjittered_clip_from_world`, `world_from_clip`, `world_from_view`,
`view_from_world`, `clip_from_view` and `view_from_clip`.
- `GpuDirectionalCascade::view_projection` was renamed to
`clip_from_world`.
- `MeshTransforms`' `transform` and `previous_transform` were renamed to
`world_from_local` and `previous_world_from_local`.
- `MeshUniform`'s `transform`, `previous_transform`,
`inverse_transpose_model_a` and `inverse_transpose_model_b` were renamed
to `world_from_local`, `previous_world_from_local`,
`local_from_world_transpose_a` and `local_from_world_transpose_b` (the
`Mesh` type in WGSL mirrors this, however `transform` and
`previous_transform` were named `model` and `previous_model`).
- `Mesh2dTransforms::transform` was renamed to `world_from_local`.
- `Mesh2dUniform`'s `transform`, `inverse_transpose_model_a` and
`inverse_transpose_model_b` were renamed to `world_from_local`,
`local_from_world_transpose_a` and `local_from_world_transpose_b` (the
`Mesh2d` type in WGSL mirrors this).
- In WGSL, in `bevy_pbr::mesh_functions`, `get_model_matrix` and
`get_previous_model_matrix` were renamed to `get_world_from_local` and
`get_previous_world_from_local`.
- In WGSL, `bevy_sprite::mesh2d_functions::get_model_matrix` was renamed
to `get_world_from_local`.
As a prerequisite for decals and clustering of light probes, we want
clustering to operate on objects other than lights. (Currently, it only
operates on point and spot lights.) This necessitates a large
refactoring, so I'm splitting it up into small steps.
The first such step is to separate clustering from lighting by moving
clustering-related types and functions out of lighting and into their
own module subtree within the `bevy_pbr` crate. (Ultimately, we may want
to move it to `bevy_render`, but that requires more work and can be a
followup.)
No code changes have been made other than adjusting import lists and
moving code. This is to make this code easy to review. Ultimately, I
want to rename "light" to "clusterable object" in most cases, but doing
that at the same time as moving the code would make reviewing harder. So
instead I'm moving the code first and will follow this up with renaming.
## Migration Guide
* Clustering-related types and functions (e.g.
`assign_lights_to_clusters`) have moved under `bevy_pbr::cluster`, in
preparation for the ability to cluster objects other than lights.
# Objective
- Using multiple raster passes to generate the depth pyramid is
extremely slow
- Pulling data from the source image is the largest bottleneck, it's
important to sample in a cache-aware pattern
- Barriers and pipeline drain between the raster passes is the second
largest bottleneck
- Each separate RenderPass on the CPU is _really_ expensive
## Solution
- Port [FidelityFX SPD](https://gpuopen.com/fidelityfx-spd) to WGSL,
replacing meshlet's existing multiple raster passes with a ~~single~~
two compute dispatches. Lack of coherent buffers means we have to do the
the last 64x64 tile from mip 7+ in a separate dispatch to ensure the mip
6 writes were flushed :(
- Workgroup shared memory version only at the moment, as the subgroup
operation is blocked by our upgrade to wgpu 0.20 #13186
- Don't enforce a power-of-2 depth pyramid texture size, simply scaling
by 0.5 is fine
# Objective
- Add motion vector support to the skybox
- This fixes the last remaining "gap" to complete the motion blur
feature
## Solution
- Add a pipeline for the skybox to write motion vectors to the prepass
## Testing
- Used examples to test motion vectors using motion blur
https://github.com/bevyengine/bevy/assets/2632925/74c0778a-7e77-4e68-8111-05791e4bfdd2
---------
Co-authored-by: Patrick Walton <pcwalton@mimiga.net>
