# Objective
Order independent transparency can filter fragment writes based on the
alpha value and it is currently hard-coded to anything higher than 0.0.
By making that value configurable, users can optimize fragment writes,
potentially reducing the number of layers needed and improving
performance in favor of some transparency quality.
## Solution
This PR adds `alpha_threshold` to the
OrderIndependentTransparencySettings component and uses the struct to
configure a corresponding shader uniform. This uniform is then used
instead of the hard-coded value.
To configure OIT with a custom alpha threshold, use:
```rust
fn setup(mut commands: Commands) {
commands.spawn((
Camera3d::default(),
OrderIndependentTransparencySettings {
layer_count: 8,
alpha_threshold: 0.2,
},
));
}
```
## Testing
I tested this change using the included OIT example, as well as with two
additional projects.
## Migration Guide
If you previously explicitly initialized
OrderIndependentTransparencySettings with your own `layer_count`, you
will now have to add either a `..default()` statement or an explicit
`alpha_threshold` value:
```rust
fn setup(mut commands: Commands) {
commands.spawn((
Camera3d::default(),
OrderIndependentTransparencySettings {
layer_count: 16,
..default()
},
));
}
```
---------
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
The two additional linear texture samplers that PCSS added caused us to
blow past the limit on Apple Silicon macOS and WebGL. To fix the issue,
this commit adds a `--feature pbr_pcss` feature gate that disables PCSS
if not present.
Closes#15345.
Closes#15525.
Closes#15821.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
The PCSS PR #13497 increased the size of clusterable objects from 64
bytes to 80 bytes but didn't decrease the UBO size to compensate, so we
blew past the 16kB limit on WebGL 2. This commit fixes the issue by
lowering the maximum number of clusterable objects to 204, which puts us
under the 16kB limit again.
Closes#15998.
# Objective
- Make the meshlet fill cluster buffers pass slightly faster
- Address https://github.com/bevyengine/bevy/issues/15920 for meshlets
- Added PreviousGlobalTransform as a required meshlet component to avoid
extra archetype moves, slightly alleviating
https://github.com/bevyengine/bevy/issues/14681 for meshlets
- Enforce that MeshletPlugin::cluster_buffer_slots is not greater than
2^25 (glitches will occur otherwise). Technically this field controls
post-lod/culling cluster count, and the issue is on pre-lod/culling
cluster count, but it's still valid now, and in the future this will be
more true.
Needs to be merged after https://github.com/bevyengine/bevy/pull/15846
and https://github.com/bevyengine/bevy/pull/15886
## Solution
- Old pass dispatched a thread per cluster, and did a binary search over
the instances to find which instance the cluster belongs to, and what
meshlet index within the instance it is.
- New pass dispatches a workgroup per instance, and has the workgroup
loop over all meshlets in the instance in order to write out the cluster
data.
- Use a push constant instead of arrayLength to fix the linked bug
- Remap 1d->2d dispatch for software raster only if actually needed to
save on spawning excess workgroups
## Testing
- Did you test these changes? If so, how?
- Ran the meshlet example, and an example with 1041 instances of 32217
meshlets per instance. Profiled the second scene with nsight, went from
0.55ms -> 0.40ms. Small savings. We're pretty much VRAM bandwidth bound
at this point.
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- Run the meshlet example
## Changelog (non-meshlets)
- PreviousGlobalTransform now implements the Default trait
Take a bunch more improvements from @zeux's nanite.cpp code.
* Use position-only vertices (discard other attributes) to determine
meshlet connectivity for grouping
* Rather than using the lock borders flag when simplifying meshlet
groups, provide the locked vertices ourselves. The lock borders flag
locks the entire border of the meshlet group, but really we only want to
lock the edges between meshlet groups - outwards facing edges are fine
to unlock. This gives a really significant increase to the DAG quality.
* Add back stuck meshlets (group has only a single meshlet,
simplification failed) to the simplification queue to allow them to get
used later on and have another attempt at simplifying
* Target 8 meshlets per group instead of 4 (second biggest improvement
after manual locks)
* Provide a seed to metis for deterministic meshlet building
* Misc other improvements
We can remove the usage of unsafe after the next upstream meshopt
release, but for now we need to use the ffi function directly. I'll do
another round of improvements later, mainly attribute-aware
simplification and using spatial weights for meshlet grouping.
Need to merge https://github.com/bevyengine/bevy/pull/15846 first.
# Objective
- I made a mistake in #15902, specifically [this
diff](e2faedb99c)
-- the `point_light_count` variable is used for all point lights, not
just shadow mapped ones, so I cannot add `.min(max_texture_cubes)`
there. (Despite `spot_light_count` having `.min(..)`)
It may have broken code like this (where `index` is index of
`point_light` vec):
9930df83ed/crates/bevy_pbr/src/render/light.rs (L848-L850)
and also causes panic here:
9930df83ed/crates/bevy_pbr/src/render/light.rs (L1173-L1174)
## Solution
- Adds `.min(max_texture_cubes)` directly to the loop where texture
views for point lights are created.
## Testing
- `lighting` example (with the directional light removed; original
example doesn't crash as only 1 directional-or-spot light in total is
shadow-mapped on webgl) no longer crashes on webgl
# Objective
1. Prevent weird glitches with stray pixels scattered around the scene
2. Prevent weird glitchy full-screen triangles that pop-up and destroy
perf (SW rasterizing huge triangles is slow)
## Solution
1. Use floating point math in the SW rasterizer bounding box calculation
to handle negative verticss, and add backface culling
2. Force hardware raster for clusters that clip the near plane, and let
the hardware rasterizer handle the clipping
I also adjusted the SW rasterizer threshold to < 64 pixels (little bit
better perf in my test scene, but still need to do a more comprehensive
test), and enabled backface culling for the hardware raster pipeline.
## Testing
- Did you test these changes? If so, how?
- Yes, on an example scene. Issues no longer occur.
- Are there any parts that need more testing?
- No.
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- Run the meshlet example.
# Objective
Bevy seems to want to standardize on "American English" spellings. Not
sure if this is laid out anywhere in writing, but see also #15947.
While perusing the docs for `typos`, I noticed that it has a `locale`
config option and tried it out.
## Solution
Switch to `en-us` locale in the `typos` config and run `typos -w`
## Migration Guide
The following methods or fields have been renamed from `*dependants*` to
`*dependents*`.
- `ProcessorAssetInfo::dependants`
- `ProcessorAssetInfos::add_dependant`
- `ProcessorAssetInfos::non_existent_dependants`
- `AssetInfo::dependants_waiting_on_load`
- `AssetInfo::dependants_waiting_on_recursive_dep_load`
- `AssetInfos::loader_dependants`
- `AssetInfos::remove_dependants_and_labels`
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/15871
(Camera is done in #15946)
## Solution
- Do the same as #15904 for other extraction systems
- Added missing `SyncComponentPlugin` for DOF, TAA, and SSAO
(According to the
[documentation](https://dev-docs.bevyengine.org/bevy/render/sync_component/struct.SyncComponentPlugin.html),
this plugin "needs to be added for manual extraction implementations."
We may need to check this is done.)
## Testing
Modified example locally to add toggles if not exist.
- [x] DOF - toggling DOF component and perspective in `depth_of_field`
example
- [x] TAA - toggling `Camera.is_active` and TAA component
- [x] clusters - not entirely sure, toggling `Camera.is_active` in
`many_lights` example (no crash/glitch even without this PR)
- [x] previous_view - toggling `Camera.is_active` in `skybox` (no
crash/glitch even without this PR)
- [x] lights - toggling `Visibility` of `DirectionalLight` in `lighting`
example
- [x] SSAO - toggling `Camera.is_active` and SSAO component in `ssao`
example
- [x] default UI camera view - toggling `Camera.is_active` (nop without
#15946 because UI defaults to some camera even if `DefaultCameraView` is
not there)
- [x] volumetric fog - toggling existence of volumetric light. Looks
like optimization, no change in behavior/visuals
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/13552
## Solution
- Thanks for the guidance from @DGriffin91, the current solution is to
transmit the light_map through the emissive channel to avoid increasing
the bandwidth of deferred shading.
- <del>Store lightmap sample result into G-Buffer and pass them into the
`Deferred Lighting Pipeline`, therefore we can get the correct indirect
lighting via the `apply_pbr_lighting` function.</del>
- <del>The original G-Buffer lacks storage for lightmap data, therefore
a new buffer is added. We can only use Rgba16Uint here due to the
32-byte limit on the render targets.</del>
## Testing
- Need to test all the examples that contains a prepass, with both the
forward and deferred rendering mode.
- I have tested the ones below.
- `lightmaps` (adjust the code based on the issue and check the
rendering result)
- `transmission` (it contains a prepass)
- `ssr` (it also uses the G-Bufffer)
- `meshlet` (forward and deferred)
- `pbr`
## Showcase
By updating the `lightmaps` example to use deferred rendering, this pull
request enables correct rendering result of the Cornell Box.
```
diff --git a/examples/3d/lightmaps.rs b/examples/3d/lightmaps.rs
index 564a3162b..11a748fba 100644
--- a/examples/3d/lightmaps.rs
+++ b/examples/3d/lightmaps.rs
@@ -1,12 +1,14 @@
//! Rendering a scene with baked lightmaps.
-use bevy::pbr::Lightmap;
+use bevy::core_pipeline::prepass::DeferredPrepass;
+use bevy::pbr::{DefaultOpaqueRendererMethod, Lightmap};
use bevy::prelude::*;
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.insert_resource(AmbientLight::NONE)
+ .insert_resource(DefaultOpaqueRendererMethod::deferred())
.add_systems(Startup, setup)
.add_systems(Update, add_lightmaps_to_meshes)
.run();
@@ -19,10 +21,12 @@ fn setup(mut commands: Commands, asset_server: Res<AssetServer>) {
..default()
});
- commands.spawn(Camera3dBundle {
- transform: Transform::from_xyz(-278.0, 273.0, 800.0),
- ..default()
- });
+ commands
+ .spawn(Camera3dBundle {
+ transform: Transform::from_xyz(-278.0, 273.0, 800.0),
+ ..default()
+ })
+ .insert(DeferredPrepass);
}
fn add_lightmaps_to_meshes(
```
<img width="1280" alt="image"
src="https://github.com/user-attachments/assets/17fd3367-61cc-4c23-b956-e7cfc751af3c">
## Emissive Issue
**The emissive light object appears incorrectly rendered because the
alpha channel of emission is set to 1 in deferred rendering and 0 in
forward rendering, leading to different emissive light result. Could
this be a bug?**
```wgsl
// pbr_deferred_functions.wgsl - pbr_input_from_deferred_gbuffer
let emissive = rgb9e5::rgb9e5_to_vec3_(gbuffer.g);
if ((pbr.material.flags & STANDARD_MATERIAL_FLAGS_UNLIT_BIT) != 0u) {
pbr.material.base_color = vec4(emissive, 1.0);
pbr.material.emissive = vec4(vec3(0.0), 1.0);
} else {
pbr.material.base_color = vec4(pow(base_rough.rgb, vec3(2.2)), 1.0);
pbr.material.emissive = vec4(emissive, 1.0);
}
// pbr_functions.wgsl - apply_pbr_lighting
emissive_light = emissive_light * mix(1.0, view_bindings::view.exposure, emissive.a);
```
---------
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
# Objective
Closes#15799.
Many rendering people and maintainers are in favor of reverting default
mesh materials added in #15524, especially as the migration to required
component is already large and heavily breaking.
## Solution
Revert default mesh materials, and adjust docs accordingly.
- Remove `extract_default_materials`
- Remove `clear_material_instances`, and move the logic back into
`extract_mesh_materials`
- Remove `HasMaterial2d` and `HasMaterial3d`
- Change default material handles back to pink instead of white
- 2D uses `Color::srgb(1.0, 0.0, 1.0)`, while 3D uses `Color::srgb(1.0,
0.0, 0.5)`. Not sure if this is intended.
There is now no indication at all about missing materials for `Mesh2d`
and `Mesh3d`. Having a mesh without a material renders nothing.
## Testing
I ran `2d_shapes`, `mesh2d_manual`, and `3d_shapes`, with and without
mesh material components.
# Objective
- Fixes#15897
## Solution
- Despawn light view entities when they go unused or when the
corresponding view is not alive.
## Testing
- `scene_viewer` example no longer prints "The preprocessing index
buffer wasn't present" warning
- modified an example to try toggling shadows for all kinds of light:
https://gist.github.com/akimakinai/ddb0357191f5052b654370699d2314cf
# Objective
Another clippy-lint fix: the goal is so that `ci lints` actually
displays the problems that a contributor caused, and not a bunch of
existing stuff in the repo. (when run on nightly)
## Solution
This fixes all but the `clippy::needless_lifetimes` lint, which will
result in substantially more fixes and be in other PR(s). I also
explicitly allow `non_local_definitions` since it is [not working
correctly, but will be
fixed](https://github.com/rust-lang/rust/issues/131643).
A few things were manually fixed: for example, some places had an
explicitly defined `div_ceil` function that was used, which is no longer
needed since this function is stable on unsigned integers. Also, empty
lines in doc comments were handled individually.
## Testing
I ran `cargo clippy --workspace --all-targets --all-features --fix
--allow-staged` with the `clippy::needless_lifetimes` lint marked as
`allow` in `Cargo.toml` to avoid fixing that too. It now passes with all
but the listed lint.
# Objective
#15320 is a particularly painful breaking change, and the new
`RenderEntity` in particular is very noisy, with a lot of `let entity =
entity.id()` spam.
## Solution
Implement `WorldQuery`, `QueryData` and `ReadOnlyQueryData` for
`RenderEntity` and `WorldEntity`.
These work the same as the `Entity` impls from a user-facing
perspective: they simply return an owned (copied) `Entity` identifier.
This dramatically reduces noise and eases migration.
Under the hood, these impls defer to the implementations for `&T` for
everything other than the "call .id() for the user" bit, as they involve
read-only access to component data. Doing it this way (as opposed to
implementing a custom fetch, as tried in the first commit) dramatically
reduces the maintenance risk of complex unsafe code outside of
`bevy_ecs`.
To make this easier (and encourage users to do this themselves!), I've
made `ReadFetch` and `WriteFetch` slightly more public: they're no
longer `doc(hidden)`. This is a good change, since trying to vendor the
logic is much worse than just deferring to the existing tested impls.
## Testing
I've run a handful of rendering examples (breakout, alien_cake_addict,
auto_exposure, fog_volumes, box_shadow) and nothing broke.
## Follow-up
We should lint for the uses of `&RenderEntity` and `&MainEntity` in
queries: this is just less nice for no reason.
---------
Co-authored-by: Trashtalk217 <trashtalk217@gmail.com>
# Objective
In the Render World, there are a number of collections that are derived
from Main World entities and are used to drive rendering. The most
notable are:
- `VisibleEntities`, which is generated in the `check_visibility` system
and contains visible entities for a view.
- `ExtractedInstances`, which maps entity ids to asset ids.
In the old model, these collections were trivially kept in sync -- any
extracted phase item could look itself up because the render entity id
was guaranteed to always match the corresponding main world id.
After #15320, this became much more complicated, and was leading to a
number of subtle bugs in the Render World. The main rendering systems,
i.e. `queue_material_meshes` and `queue_material2d_meshes`, follow a
similar pattern:
```rust
for visible_entity in visible_entities.iter::<With<Mesh2d>>() {
let Some(mesh_instance) = render_mesh_instances.get_mut(visible_entity) else {
continue;
};
// Look some more stuff up and specialize the pipeline...
let bin_key = Opaque2dBinKey {
pipeline: pipeline_id,
draw_function: draw_opaque_2d,
asset_id: mesh_instance.mesh_asset_id.into(),
material_bind_group_id: material_2d.get_bind_group_id().0,
};
opaque_phase.add(
bin_key,
*visible_entity,
BinnedRenderPhaseType::mesh(mesh_instance.automatic_batching),
);
}
```
In this case, `visible_entities` and `render_mesh_instances` are both
collections that are created and keyed by Main World entity ids, and so
this lookup happens to work by coincidence. However, there is a major
unintentional bug here: namely, because `visible_entities` is a
collection of Main World ids, the phase item being queued is created
with a Main World id rather than its correct Render World id.
This happens to not break mesh rendering because the render commands
used for drawing meshes do not access the `ItemQuery` parameter, but
demonstrates the confusion that is now possible: our UI phase items are
correctly being queued with Render World ids while our meshes aren't.
Additionally, this makes it very easy and error prone to use the wrong
entity id to look up things like assets. For example, if instead we
ignored visibility checks and queued our meshes via a query, we'd have
to be extra careful to use `&MainEntity` instead of the natural
`Entity`.
## Solution
Make all collections that are derived from Main World data use
`MainEntity` as their key, to ensure type safety and avoid accidentally
looking up data with the wrong entity id:
```rust
pub type MainEntityHashMap<V> = hashbrown::HashMap<MainEntity, V, EntityHash>;
```
Additionally, we make all `PhaseItem` be able to provide both their Main
and Render World ids, to allow render phase implementors maximum
flexibility as to what id should be used to look up data.
You can think of this like tracking at the type level whether something
in the Render World should use it's "primary key", i.e. entity id, or
needs to use a foreign key, i.e. `MainEntity`.
## Testing
##### TODO:
This will require extensive testing to make sure things didn't break!
Additionally, some extraction logic has become more complicated and
needs to be checked for regressions.
## Migration Guide
With the advent of the retained render world, collections that contain
references to `Entity` that are extracted into the render world have
been changed to contain `MainEntity` in order to prevent errors where a
render world entity id is used to look up an item by accident. Custom
rendering code may need to be changed to query for `&MainEntity` in
order to look up the correct item from such a collection. Additionally,
users who implement their own extraction logic for collections of main
world entity should strongly consider extracting into a different
collection that uses `MainEntity` as a key.
Additionally, render phases now require specifying both the `Entity` and
`MainEntity` for a given `PhaseItem`. Custom render phases should ensure
`MainEntity` is available when queuing a phase item.
# Objective
- Closes#15716
- Closes#15718
## Solution
- Replace `Handle<MeshletMesh>` with a new `MeshletMesh3d` component
- As expected there were some random things that needed fixing:
- A couple tests were storing handles just to prevent them from being
dropped I believe, which seems to have been unnecessary in some.
- The `SpriteBundle` still had a `Handle<Image>` field. I've removed
this.
- Tests in `bevy_sprite` incorrectly added a `Handle<Image>` field
outside of the `Sprite` component.
- A few examples were still inserting `Handle`s, switched those to their
corresponding wrappers.
- 2 examples that were still querying for `Handle<Image>` were changed
to query `Sprite`
## Testing
- I've verified that the changed example work now
## Migration Guide
`Handle` can no longer be used as a `Component`. All existing Bevy types
using this pattern have been wrapped in their own semantically
meaningful type. You should do the same for any custom `Handle`
components your project needs.
The `Handle<MeshletMesh>` component is now `MeshletMesh3d`.
The `WithMeshletMesh` type alias has been removed. Use
`With<MeshletMesh3d>` instead.
# Objective
- Another step towards #15716
- Remove trait implementations that are dependent on `Handle<T>` being a
`Component`
## Solution
- Remove unused `ExtractComponent` trait implementation for `Handle<T>`
- Remove unused `ExtractInstance` trait implementation for `AssetId`
- Although the `ExtractInstance` trait wasn't used, the `AssetId`s were
being stored inside of `ExtractedInstances` which has an
`ExtractInstance` trait bound on its contents.
I've upgraded the `RenderMaterialInstances` type alias to be its own
resource, identical to `ExtractedInstances<AssetId<M>>` to get around
that with minimal breakage.
## Testing
Tested `many_cubes`, rendering did not explode
# Objective
- Closes#15752
Calling the functions `App::observe` and `World::observe` doesn't make
sense because you're not "observing" the `App` or `World`, you're adding
an observer that listens for an event that occurs *within* the `World`.
We should rename them to better fit this.
## Solution
Renames:
- `App::observe` -> `App::add_observer`
- `World::observe` -> `World::add_observer`
- `Commands::observe` -> `Commands::add_observer`
- `EntityWorldMut::observe_entity` -> `EntityWorldMut::observe`
(Note this isn't a breaking change as the original rename was introduced
earlier this cycle.)
## Testing
Reusing current tests.
# Objective
Getting closer to the end! Another part of the required components
migration: reflection probes.
## Solution
As per the [proposal added by
Cart](https://hackmd.io/@bevy/required_components/%2FNmpIh0tGSiayGlswbfcEzw)
(Proposal 2), make `LightProbe` require `Transform` and `Visibility`,
and deprecate `ReflectionProbeBundle`.
Note that this proposal wasn't officially blessed yet, but it is the
only existing one that really works, so I implemented it here for
consideration.
## Testing
I ran the reflection probe example, and it appears to work.
---
## Migration Guide
`ReflectionProbeBundle` has been deprecated in favor of inserting the
`LightProbe` and `EnvironmentMapLight` components directly. Inserting
them will now automatically insert `Transform` and `Visibility`
components.
---------
Co-authored-by: Tim Blackbird <justthecooldude@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fixes#15285
## Solution
`winit` sends resized to zero events when the window is minimized only
on Windows OS(rust-windowing/winit#2015).
This makes updating window viewport size to `(0, 0)` and panicking when
calculating aspect ratio.
~~So, just skip these kinds of events - resizing to (0, 0) when the
window is minimized - on Windows OS~~
Idially, the camera extraction excludes the cameras whose target size
width or height is zero here;
25bfa80e60/crates/bevy_render/src/camera/camera.rs (L1060-L1074)
but it seems that winit event loop sends resize events after extraction
and before post update schedule, so they might panics before the
extraction filters them out.
Alternatively, it might be possible to change event loop evaluating
order or defer them to the right schedule but I'm afraid that it might
cause some breaking changes, so just skip rendering logics for such
windows and they will be all filtered out by the extractions on the next
frame and thereafter.
## Testing
Running the example in the original issue and minimizing causes panic,
or just running `tests/window/minimising.rs` with `cargo run --example
minimising` panics without this PR and doesn't panics with this PR.
I think that we should run it in CI on Windows OS btw
# Objective
Fixes#15560
Fixes (most of) #15570
Currently a lot of examples (and presumably some user code) depend on
toggling certain render features by adding/removing a single component
to an entity, e.g. `SpotLight` to toggle a light. Because of the
retained render world this no longer works: Extract will add any new
components, but when it is removed the entity persists unchanged in the
render world.
## Solution
Add `SyncComponentPlugin<C: Component>` that registers
`SyncToRenderWorld` as a required component for `C`, and adds a
component hook that will clear all components from the render world
entity when `C` is removed. We add this plugin to
`ExtractComponentPlugin` which fixes most instances of the problem. For
custom extraction logic we can manually add `SyncComponentPlugin` for
that component.
We also rename `WorldSyncPlugin` to `SyncWorldPlugin` so we start a
naming convention like all the `Extract` plugins.
In this PR I also fixed a bunch of breakage related to the retained
render world, stemming from old code that assumed that `Entity` would be
the same in both worlds.
I found that using the `RenderEntity` wrapper instead of `Entity` in
data structures when referring to render world entities makes intent
much clearer, so I propose we make this an official pattern.
## Testing
Run examples like
```
cargo run --features pbr_multi_layer_material_textures --example clearcoat
cargo run --example volumetric_fog
```
and see that they work, and that toggles work correctly. But really we
should test every single example, as we might not even have caught all
the breakage yet.
---
## Migration Guide
The retained render world notes should be updated to explain this edge
case and `SyncComponentPlugin`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Trashtalk217 <trashtalk217@gmail.com>
# Objective
- Prepare for streaming by storing vertex data per-meshlet, rather than
per-mesh (this means duplicating vertices per-meshlet)
- Compress vertex data to reduce the cost of this
## Solution
The important parts are in from_mesh.rs, the changes to the Meshlet type
in asset.rs, and the changes in meshlet_bindings.wgsl. Everything else
is pretty secondary/boilerplate/straightforward changes.
- Positions are quantized in centimeters with a user-provided power of 2
factor (ideally auto-determined, but that's a TODO for the future),
encoded as an offset relative to the minimum value within the meshlet,
and then stored as a packed list of bits using the minimum number of
bits needed for each vertex position channel for that meshlet
- E.g. quantize positions (lossly, throws away precision that's not
needed leading to using less bits in the bitstream encoding)
- Get the min/max quantized value of each X/Y/Z channel of the quantized
positions within a meshlet
- Encode values relative to the min value of the meshlet. E.g. convert
from [min, max] to [0, max - min]
- The new max value in the meshlet is (max - min), which only takes N
bits, so we only need N bits to store each channel within the meshlet
(lossless)
- We can store the min value and that it takes N bits per channel in the
meshlet metadata, and reconstruct the position from the bitstream
- Normals are octahedral encoded and than snorm2x16 packed and stored as
a single u32.
- Would be better to implement the precise variant of octhedral encoding
for extra precision (no extra decode cost), but decided to keep it
simple for now and leave that as a followup
- Tried doing a quantizing and bitstream encoding scheme like I did for
positions, but struggled to get it smaller. Decided to go with this for
simplicity for now
- UVs are uncompressed and take a full 64bits per vertex which is
expensive
- In the future this should be improved
- Tangents, as of the previous PR, are not explicitly stored and are
instead derived from screen space gradients
- While I'm here, split up MeshletMeshSaverLoader into two separate
types
Other future changes include implementing a smaller encoding of triangle
data (3 u8 indices = 24 bits per triangle currently), and more
disk-oriented compression schemes.
References:
* "A Deep Dive into UE5's Nanite Virtualized Geometry"
https://advances.realtimerendering.com/s2021/Karis_Nanite_SIGGRAPH_Advances_2021_final.pdf#page=128
(also available on youtube)
* "Towards Practical Meshlet Compression"
https://arxiv.org/pdf/2404.06359
* "Vertex quantization in Omniforce Game Engine"
https://daniilvinn.github.io/2024/05/04/omniforce-vertex-quantization.html
## Testing
- Did you test these changes? If so, how?
- Converted the stanford bunny, and rendered it with a debug material
showing normals, and confirmed that it's identical to what's on main.
EDIT: See additional testing in the comments below.
- Are there any parts that need more testing?
- Could use some more size comparisons on various meshes, and testing
different quantization factors. Not sure if 4 is a good default. EDIT:
See additional testing in the comments below.
- Also did not test runtime performance of the shaders. EDIT: See
additional testing in the comments below.
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- Use my unholy script, replacing the meshlet example
https://paste.rs/7xQHk.rs (must make MeshletMesh fields pub instead of
pub crate, must add lz4_flex as a dev-dependency) (must compile with
meshlet and meshlet_processor features, mesh must have only positions,
normals, and UVs, no vertex colors or tangents)
---
## Migration Guide
- TBD by JMS55 at the end of the release
The previous fixes were breaking pretty much everything on main due to
naga-oil complaining about the OIT shader not being loaded, since
apparently webgl is a default feature. This fix is a bit messier, but
properly warns the user and is probably what we should have gone for in
the first place.
# Objective
- Alpha blending can easily fail in many situations and requires sorting
on the cpu
## Solution
- Implement order independent transparency (OIT) as an alternative to
alpha blending
- The implementation uses 2 passes
- The first pass records all the fragments colors and position to a
buffer that is the size of N layers * the render target resolution.
- The second pass sorts the fragments, blends them and draws them to the
screen. It also currently does manual depth testing because early-z
fails in too many cases in the first pass.
## Testing
- We've been using this implementation at foresight in production for
many months now and we haven't had any issues related to OIT.
---
## Showcase
## Future work
- Add an example showing how to use OIT for a custom material
- Next step would be to implement a per-pixel linked list to reduce
memory use
- I'd also like to investigate using a BinnedRenderPhase instead of a
SortedRenderPhase. If it works, it would make the transparent pass
significantly faster.
---------
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
Co-authored-by: Charlotte McElwain <charlotte.c.mcelwain@gmail.com>
Currently, it's possible for the `collect_meshes_for_gpu_building`
system to run after `set_mesh_motion_vector_flags`. This will cause
those motion vector flags to be overwritten, which will cause the shader
to ignore the motion vectors for skinned meshes, which will cause
graphical artifacts.
This patch corrects the issue by forcing `set_mesh_motion_vector_flags`
to run after `collect_meshes_for_gpu_building`.
# Objective
After merging retained rendering world #15320, we now have a good way of
creating a link between worlds (*HIYAA intensifies*). This means that
`get_or_spawn` is no longer necessary for that function. Entity should
be opaque as the warning above `get_or_spawn` says. This is also part of
#15459.
I'm deprecating `get_or_spawn_batch` in a different PR in order to keep
the PR small in size.
## Solution
Deprecate `get_or_spawn` and replace it with `get_entity` in most
contexts. If it's possible to query `&RenderEntity`, then the entity is
synced and `render_entity.id()` is initialized in the render world.
## Migration Guide
If you are given an `Entity` and you want to do something with it, use
`Commands.entity(...)` or `World.entity(...)`. If instead you want to
spawn something use `Commands.spawn(...)` or `World.spawn(...)`. If you
are not sure if an entity exists, you can always use `get_entity` and
match on the `Option<...>` that is returned.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Yet another PR for migrating stuff to required components. This time,
cameras!
## Solution
As per the [selected
proposal](https://hackmd.io/tsYID4CGRiWxzsgawzxG_g#Combined-Proposal-1-Selected),
deprecate `Camera2dBundle` and `Camera3dBundle` in favor of `Camera2d`
and `Camera3d`.
Adding a `Camera` without `Camera2d` or `Camera3d` now logs a warning,
as suggested by Cart [on
Discord](https://discord.com/channels/691052431525675048/1264881140007702558/1291506402832945273).
I would personally like cameras to work a bit differently and be split
into a few more components, to avoid some footguns and confusing
semantics, but that is more controversial, and shouldn't block this core
migration.
## Testing
I ran a few 2D and 3D examples, and tried cameras with and without
render graphs.
---
## Migration Guide
`Camera2dBundle` and `Camera3dBundle` have been deprecated in favor of
`Camera2d` and `Camera3d`. Inserting them will now also insert the other
components required by them automatically.
# Objective
Fixes#15525
The deferred and mesh pipelines tonemapping LUT bindings were
accidentally out of sync, breaking deferred rendering.
As noted in the issue it's still broken on wasm due to hitting a texture
limit.
## Solution
Add constants for these instead of hardcoding them.
## Testing
Test with `cargo run --example deferred_rendering` and see it works, run
the same on main and see it crash.
Early implementation. I still have to fix the documentation and consider
writing a small migration guide.
Questions left to answer:
* [x] should thickness be an overridable constant?
* [x] is there a better way to implement `Eq`/`Hash` for `SSAOMethod`?
* [x] do we want to keep the linear sampler for the depth texture?
* [x] is there a better way to separate the logic than preprocessor
macros?
## Migration guide
SSAO algorithm was changed from GTAO to VBAO (visibility bitmasks). A
new field, `constant_object_thickness`, was added to
`ScreenSpaceAmbientOcclusion`. `ScreenSpaceAmbientOcclusion` also lost
its `Eq` and `Hash` implementations.
---------
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
As discussed in #15521
- Partial revert of #14897, reverting the change to the methods to
consume `self`
- The `insert_if` method is kept
The migration guide of #14897 should be removed
Closes#15521
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Again, a step forward in the migration to required components: a bunch
of camera rendering cormponents!
Note that this does not include the camera components themselves yet,
because the naming and API for `Camera` hasn't been fully decided yet.
## Solution
As per the [selected
proposals](https://hackmd.io/@bevy/required_components/%2FpiqD9GOdSFKZZGzzh3C7Uw):
- Deprecate `MotionBlurBundle` in favor of the `MotionBlur` component
- Deprecate `TemporalAntiAliasBundle` in favor of the
`TemporalAntiAliasing` component
- Deprecate `ScreenSpaceAmbientOcclusionBundle` in favor of the
`ScreenSpaceAmbientOcclusion` component
- Deprecate `ScreenSpaceReflectionsBundle` in favor of the
`ScreenSpaceReflections` component
---
## Migration Guide
`MotionBlurBundle`, `TemporalAntiAliasBundle`,
`ScreenSpaceAmbientOcclusionBundle`, and `ScreenSpaceReflectionsBundle`
have been deprecated in favor of the `MotionBlur`,
`TemporalAntiAliasing`, `ScreenSpaceAmbientOcclusion`, and
`ScreenSpaceReflections` components instead. Inserting them will now
also insert the other components required by them automatically.
# Objective
A big step in the migration to required components: meshes and
materials!
## Solution
As per the [selected
proposal](https://hackmd.io/@bevy/required_components/%2Fj9-PnF-2QKK0on1KQ29UWQ):
- Deprecate `MaterialMesh2dBundle`, `MaterialMeshBundle`, and
`PbrBundle`.
- Add `Mesh2d` and `Mesh3d` components, which wrap a `Handle<Mesh>`.
- Add `MeshMaterial2d<M: Material2d>` and `MeshMaterial3d<M: Material>`,
which wrap a `Handle<M>`.
- Meshes *without* a mesh material should be rendered with a default
material. The existence of a material is determined by
`HasMaterial2d`/`HasMaterial3d`, which is required by
`MeshMaterial2d`/`MeshMaterial3d`. This gets around problems with the
generics.
Previously:
```rust
commands.spawn(MaterialMesh2dBundle {
mesh: meshes.add(Circle::new(100.0)).into(),
material: materials.add(Color::srgb(7.5, 0.0, 7.5)),
transform: Transform::from_translation(Vec3::new(-200., 0., 0.)),
..default()
});
```
Now:
```rust
commands.spawn((
Mesh2d(meshes.add(Circle::new(100.0))),
MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))),
Transform::from_translation(Vec3::new(-200., 0., 0.)),
));
```
If the mesh material is missing, previously nothing was rendered. Now,
it renders a white default `ColorMaterial` in 2D and a
`StandardMaterial` in 3D (this can be overridden). Below, only every
other entity has a material:
Why white? This is still open for discussion, but I think white makes
sense for a *default* material, while *invalid* asset handles pointing
to nothing should have something like a pink material to indicate that
something is broken (I don't handle that in this PR yet). This is kind
of a mix of Godot and Unity: Godot just renders a white material for
non-existent materials, while Unity renders nothing when no materials
exist, but renders pink for invalid materials. I can also change the
default material to pink if that is preferable though.
## Testing
I ran some 2D and 3D examples to test if anything changed visually. I
have not tested all examples or features yet however. If anyone wants to
test more extensively, it would be appreciated!
## Implementation Notes
- The relationship between `bevy_render` and `bevy_pbr` is weird here.
`bevy_render` needs `Mesh3d` for its own systems, but `bevy_pbr` has all
of the material logic, and `bevy_render` doesn't depend on it. I feel
like the two crates should be refactored in some way, but I think that's
out of scope for this PR.
- I didn't migrate meshlets to required components yet. That can
probably be done in a follow-up, as this is already a huge PR.
- It is becoming increasingly clear to me that we really, *really* want
to disallow raw asset handles as components. They caused me a *ton* of
headache here already, and it took me a long time to find every place
that queried for them or inserted them directly on entities, since there
were no compiler errors for it. If we don't remove the `Component`
derive, I expect raw asset handles to be a *huge* footgun for users as
we transition to wrapper components, especially as handles as components
have been the norm so far. I personally consider this to be a blocker
for 0.15: we need to migrate to wrapper components for asset handles
everywhere, and remove the `Component` derive. Also see
https://github.com/bevyengine/bevy/issues/14124.
---
## Migration Guide
Asset handles for meshes and mesh materials must now be wrapped in the
`Mesh2d` and `MeshMaterial2d` or `Mesh3d` and `MeshMaterial3d`
components for 2D and 3D respectively. Raw handles as components no
longer render meshes.
Additionally, `MaterialMesh2dBundle`, `MaterialMeshBundle`, and
`PbrBundle` have been deprecated. Instead, use the mesh and material
components directly.
Previously:
```rust
commands.spawn(MaterialMesh2dBundle {
mesh: meshes.add(Circle::new(100.0)).into(),
material: materials.add(Color::srgb(7.5, 0.0, 7.5)),
transform: Transform::from_translation(Vec3::new(-200., 0., 0.)),
..default()
});
```
Now:
```rust
commands.spawn((
Mesh2d(meshes.add(Circle::new(100.0))),
MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))),
Transform::from_translation(Vec3::new(-200., 0., 0.)),
));
```
If the mesh material is missing, a white default material is now used.
Previously, nothing was rendered if the material was missing.
The `WithMesh2d` and `WithMesh3d` query filter type aliases have also
been removed. Simply use `With<Mesh2d>` or `With<Mesh3d>`.
---------
Co-authored-by: Tim Blackbird <justthecooldude@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Another part of the migration to required components: fog volumes!
## Solution
Deprecate `FogVolumeBundle` and make `FogVolume` require `Transform` and
`Visibility`, as per the [chosen
proposal](https://hackmd.io/@bevy/required_components/%2FcO7JPSAQR5G0J_j5wNwtOQ).
---
## Migration Guide
Replace all insertions of `FogVolumeBundle` with the `Visibility`
component. The other components required by it will now be inserted
automatically.
# Objective
- First step towards #15558
## Solution
- Rename `get_vertex_buffer_data` to `create_packed_vertex_buffer_data`
to make it clear that it is not "free" and actually allocates
- Compute length analytically for preallocation instead of creating the
buffer to get its length and immediately discard it
- Use existing vertex attribute size calculation method to reduce code
duplication
- Fix a bug where mesh index data was being replaced by unnecessarily
newly created mesh vertex data in some cases
- Overall reduces mesh copies by two. We still have plenty to go, but
these were the easy ones.
## Testing
- I ran 3d_scene, lighting, and many_cubes, they look fine.
- Benchmarks would be nice, but this is very obviously a win in perf and
correctness.
---
## Migration Guide
- `Mesh::create_packed_vertex_buffer_data` has been renamed
`Mesh::create_packed_vertex_buffer_data` to reflect the fact that it
copies data and allocates.
## Showcase
- look mom, less copies
# Objective
Another step in the migration to required components: lights!
Note that this does not include `EnvironmentMapLight` or reflection
probes yet, because their API hasn't been fully chosen yet.
## Solution
As per the [selected
proposals](https://hackmd.io/@bevy/required_components/%2FLLnzwz9XTxiD7i2jiUXkJg):
- Deprecate `PointLightBundle` in favor of the `PointLight` component
- Deprecate `SpotLightBundle` in favor of the `PointLight` component
- Deprecate `DirectionalLightBundle` in favor of the `DirectionalLight`
component
## Testing
I ran some examples with lights.
---
## Migration Guide
`PointLightBundle`, `SpotLightBundle`, and `DirectionalLightBundle` have
been deprecated. Use the `PointLight`, `SpotLight`, and
`DirectionalLight` components instead. Adding them will now insert the
other components required by them automatically.
# Objective
Fixes#15541
A bunch of lifetimes were added during the Assets V2 rework, but after
moving to async traits in #12550 they can be elided. That PR mentions
that this might be the case, but apparently it wasn't followed up on at
the time.
~~I ended up grepping for `<'a` and finding a similar case in
`bevy_reflect` which I also fixed.~~ (edit: that one was needed
apparently)
Note that elided lifetimes are unstable in `impl Trait`. If that gets
stabilized then we can elide even more.
## Solution
Remove the extra lifetimes.
## Testing
Everything still compiles. If I have messed something up there is a
small risk that some user code stops compiling, but all the examples
still work at least.
---
## Migration Guide
The traits `AssetLoader`, `AssetSaver` and `Process` traits from
`bevy_asset` now use elided lifetimes. If you implement these then
remove the named lifetime.
- Adopted from #14449
- Still fixes#12144.
## Migration Guide
The retained render world is a complex change: migrating might take one
of a few different forms depending on the patterns you're using.
For every example, we specify in which world the code is run. Most of
the changes affect render world code, so for the average Bevy user who's
using Bevy's high-level rendering APIs, these changes are unlikely to
affect your code.
### Spawning entities in the render world
Previously, if you spawned an entity with `world.spawn(...)`,
`commands.spawn(...)` or some other method in the rendering world, it
would be despawned at the end of each frame. In 0.15, this is no longer
the case and so your old code could leak entities. This can be mitigated
by either re-architecting your code to no longer continuously spawn
entities (like you're used to in the main world), or by adding the
`bevy_render::world_sync::TemporaryRenderEntity` component to the entity
you're spawning. Entities tagged with `TemporaryRenderEntity` will be
removed at the end of each frame (like before).
### Extract components with `ExtractComponentPlugin`
```
// main world
app.add_plugins(ExtractComponentPlugin::<ComponentToExtract>::default());
```
`ExtractComponentPlugin` has been changed to only work with synced
entities. Entities are automatically synced if `ComponentToExtract` is
added to them. However, entities are not "unsynced" if any given
`ComponentToExtract` is removed, because an entity may have multiple
components to extract. This would cause the other components to no
longer get extracted because the entity is not synced.
So be careful when only removing extracted components from entities in
the render world, because it might leave an entity behind in the render
world. The solution here is to avoid only removing extracted components
and instead despawn the entire entity.
### Manual extraction using `Extract<Query<(Entity, ...)>>`
```rust
// in render world, inspired by bevy_pbr/src/cluster/mod.rs
pub fn extract_clusters(
mut commands: Commands,
views: Extract<Query<(Entity, &Clusters, &Camera)>>,
) {
for (entity, clusters, camera) in &views {
// some code
commands.get_or_spawn(entity).insert(...);
}
}
```
One of the primary consequences of the retained rendering world is that
there's no longer a one-to-one mapping from entity IDs in the main world
to entity IDs in the render world. Unlike in Bevy 0.14, Entity 42 in the
main world doesn't necessarily map to entity 42 in the render world.
Previous code which called `get_or_spawn(main_world_entity)` in the
render world (`Extract<Query<(Entity, ...)>>` returns main world
entities). Instead, you should use `&RenderEntity` and
`render_entity.id()` to get the correct entity in the render world. Note
that this entity does need to be synced first in order to have a
`RenderEntity`.
When performing manual abstraction, this won't happen automatically
(like with `ExtractComponentPlugin`) so add a `SyncToRenderWorld` marker
component to the entities you want to extract.
This results in the following code:
```rust
// in render world, inspired by bevy_pbr/src/cluster/mod.rs
pub fn extract_clusters(
mut commands: Commands,
views: Extract<Query<(&RenderEntity, &Clusters, &Camera)>>,
) {
for (render_entity, clusters, camera) in &views {
// some code
commands.get_or_spawn(render_entity.id()).insert(...);
}
}
// in main world, when spawning
world.spawn(Clusters::default(), Camera::default(), SyncToRenderWorld)
```
### Looking up `Entity` ids in the render world
As previously stated, there's now no correspondence between main world
and render world `Entity` identifiers.
Querying for `Entity` in the render world will return the `Entity` id in
the render world: query for `MainEntity` (and use its `id()` method) to
get the corresponding entity in the main world.
This is also a good way to tell the difference between synced and
unsynced entities in the render world, because unsynced entities won't
have a `MainEntity` component.
---------
Co-authored-by: re0312 <re0312@outlook.com>
Co-authored-by: re0312 <45868716+re0312@users.noreply.github.com>
Co-authored-by: Periwink <charlesbour@gmail.com>
Co-authored-by: Anselmo Sampietro <ans.samp@gmail.com>
Co-authored-by: Emerson Coskey <56370779+ecoskey@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Christian Hughes <9044780+ItsDoot@users.noreply.github.com>
* Save 16 bytes per vertex by calculating tangents in the shader at
runtime, rather than storing them in the vertex data.
* Based on https://jcgt.org/published/0009/03/04,
https://www.jeremyong.com/graphics/2023/12/16/surface-gradient-bump-mapping.
* Fixed visbuffer resolve to use the updated algorithm that flips ddy
correctly
* Added some more docs about meshlet material limitations, and some
TODOs about transforming UV coordinates for the future.
For testing add a normal map to the bunnies with StandardMaterial like
below, and then test that on both main and this PR (make sure to
download the correct bunny for each). Results should be mostly
identical.
```rust
normal_map_texture: Some(asset_server.load_with_settings(
"textures/BlueNoise-Normal.png",
|settings: &mut ImageLoaderSettings| settings.is_srgb = false,
)),
```
# Objective
- Fixes#6370
- Closes#6581
## Solution
- Added the following lints to the workspace:
- `std_instead_of_core`
- `std_instead_of_alloc`
- `alloc_instead_of_core`
- Used `cargo +nightly fmt` with [item level use
formatting](https://rust-lang.github.io/rustfmt/?version=v1.6.0&search=#Item%5C%3A)
to split all `use` statements into single items.
- Used `cargo clippy --workspace --all-targets --all-features --fix
--allow-dirty` to _attempt_ to resolve the new linting issues, and
intervened where the lint was unable to resolve the issue automatically
(usually due to needing an `extern crate alloc;` statement in a crate
root).
- Manually removed certain uses of `std` where negative feature gating
prevented `--all-features` from finding the offending uses.
- Used `cargo +nightly fmt` with [crate level use
formatting](https://rust-lang.github.io/rustfmt/?version=v1.6.0&search=#Crate%5C%3A)
to re-merge all `use` statements matching Bevy's previous styling.
- Manually fixed cases where the `fmt` tool could not re-merge `use`
statements due to conditional compilation attributes.
## Testing
- Ran CI locally
## Migration Guide
The MSRV is now 1.81. Please update to this version or higher.
## Notes
- This is a _massive_ change to try and push through, which is why I've
outlined the semi-automatic steps I used to create this PR, in case this
fails and someone else tries again in the future.
- Making this change has no impact on user code, but does mean Bevy
contributors will be warned to use `core` and `alloc` instead of `std`
where possible.
- This lint is a critical first step towards investigating `no_std`
options for Bevy.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
> Rust 1.81 released the #[expect(...)] attribute, which works like
#[allow(...)] but throws a warning if the lint isn't raised. This is
preferred to #[allow(...)] because it tells us when it can be removed.
- Adopts the parts of #15118 that are complete, and updates the branch
so it can be merged.
- There were a few conflicts, let me know if I misjudged any of 'em.
Alice's
[recommendation](https://github.com/bevyengine/bevy/issues/15059#issuecomment-2349263900)
seems well-taken, let's do this crate by crate now that @BD103 has done
the lion's share of this!
(Relates to, but doesn't yet completely finish #15059.)
Crates this _doesn't_ cover:
- bevy_input
- bevy_gilrs
- bevy_window
- bevy_winit
- bevy_state
- bevy_render
- bevy_picking
- bevy_core_pipeline
- bevy_sprite
- bevy_text
- bevy_pbr
- bevy_ui
- bevy_gltf
- bevy_gizmos
- bevy_dev_tools
- bevy_internal
- bevy_dylib
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
Co-authored-by: Ben Frankel <ben.frankel7@gmail.com>
Co-authored-by: Antony <antony.m.3012@gmail.com>
