# Objective
- After the multithreaded executor finishes running all the systems, we apply the buffers for any system that hasn't applied it's buffers. This is a courtesy apply for users who forget to order their systems before a apply_system_buffers. When checking stageless, it was found that this apply_system_buffers was running on the executor thread instead of the world's thread. This is a problem because anything with world access should be able to access nonsend resources.
## Solution
- Move the final apply_system_buffers outside of the executor and outside of the scope, so it runs on the same thread that schedule.run is called on.
# Objective
In CSS Flexbox width and height are auto by default, whereas in Bevy their default is `Size::Undefined`.
This means that, unlike in CSS, if you elide a height or width value for a node it will be given zero length (unless it has an explicitly sized child node). This has misled users into falsely assuming that they have to explicitly set a value for both height and width all the time.
relevant issue: #7120
## Solution
Change the `Size` `width` and `height` default values to `Val::Auto`
## Changelog
* Changed the `Size` `width` and `height` default values to `Val::Auto`
## Migration Guide
The default values for `Size` `width` and `height` have been changed from `Val::Undefined` to `Val::Auto`.
It's unlikely to cause any issues with existing code.
# Objective
- The stageless executor keeps track of systems that have run, but have not applied their system buffers. The bitset for that was being cloned into apply_system_buffers and cleared in that function, but we need to clear the original version instead of the cloned version
## Solution
- move the clear out of the apply_system_buffers function.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Clearing the reader doesn't require iterating the events. Updating the `last_event_count` of the reader is enough.
I rewrote part of the documentation as some of it was incorrect or harder to understand than necessary.
## Changelog
Added `ManualEventReader::clear()`
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
During testing, I observed that the `FrameCount` resource (`bevy_core`) was being incremented by `FrameCountPlugin` non-deterministically, during update, subject to the whims of the execution order.
The effect was that the counter could and did change while a frame was still in flight, while user-systems were still executing.
## Solution
I have delayed the incrementing of the `FrameCount` resource to `CoreStage::Last`. The resource was described in the documentation as "*a count of rendered frames*" and, after my change, it actually will match that description.
## Changes
- `CoreStage::Last` was chosen so that the counter will be `0` during all earlier stages of the very first execution of the schedule.
- Documentation added declaring *when* the counter is incremented.
- Hint added, directing users towards `u32::wrapping_sub()` because integer overflow is reasonable to expect.
## Note
Even though this change might have a short time-to-live in light of the upcoming *Stageless* changes, I think this is worthwhile – at least as an in-code reminder that this counter should behave predictably.
# Objective
- Resolve a Fixme to remove the `Default` impl for `HandleType`, once Reflection no longer requires it.
- Presumebly this Comment was made before the `FromReflect` Derive used the `#[reflect(Default)]`, to substitute for the requirment that a ignored field has a `Default`.
## Solution
- Just remove the `Default` derive and comment.
## Objective
A common easy to miss mistake is to write something like:
``` rust
Size::new(Val::Percent(100.), Val::Px(100.));
```
`UiRect` has the `left`, `right`, `all`, `vertical`, etc constructor functions, `Size` is used a lot more frequently but lacks anything similar.
## Solution
Implement `all`, `width` and `height` functions for `Size`.
## Changelog
* Added `all`, `width` and `height` functions to `Size`.
Since the new renderer, no frustum culling is applied to 2d components
(be it Sprite or Mesh2d), the stress_tests docs is therefore misleading
and should be updated.
Furthermore, the `many_animated_sprites` example, unlike `many_sprites`
kept vsync enabled, making the stress test less useful than it could be.
We now disable vsync for `many_animated_sprites`.
Also, `many_animated_sprites` didn't have the stress_tests warning
message, instead, it had a paragraph in the module doc. I replaced the
module doc paragraph by the warning message, to be more in line with
other examples.
## Solution
- Remove the paragraph about frustum culling in the `many_sprites`
and `many_animated_sprites` stress tests
# Objective
- Avoid hitting the 6 hours default timeout
- Waiting for 6 hours for a job to fail is wasteful and slow down CI for other PRs
## Solution
- Put shorter timeouts on all jobs
# Problem
The field is called `background_color` but it is also used to hold the colors of text glyphs and images.
It's mildly confusing and longer to type than just `color`.
## Solution
Rename `background_color` to `color`.
## Changelog
* Renamed the `background_color` field of `ExtractedUiNode` to `color`.
## Migration Guide
* The `background_color` field of `ExtractedUiNode` is now named `color`.
# Objective
- Fixes#7430.
## Solution
- Changed fields of `ArrayIter` to be private.
- Add a constructor `new` to `ArrayIter`.
- Replace normal struct creation with `new`.
---
## Changelog
- Add a constructor `new` to `ArrayIter`.
Co-authored-by: Elbert Ronnie <103196773+elbertronnie@users.noreply.github.com>
## Objective
Remove `QueuedText`.
`QueuedText` isn't useful. It's exposed in the `bevy_ui` public interface but can't be used for anything because its `entities` field is private.
## Solution
Remove the `QueuedText` struct and use a `Local<Vec<Entity>` in its place.
## Changelog
* Removed `QueuedText`
# Objective
- Bevy should not have any "internal" execution order ambiguities. These clutter the output of user-facing error reporting, and can result in nasty, nondetermistic, very difficult to solve bugs.
- Verifying this currently involves repeated non-trivial manual work.
## Solution
- [x] add an example to quickly check this
- ~~[ ] ensure that this example panics if there are any unresolved ambiguities~~
- ~~[ ] run the example in CI 😈~~
There's one tricky ambiguity left, between UI and animation. I don't have the tools to fix this without system set configuration, so the remaining work is going to be left to #7267 or another PR after that.
```
2023-01-27T18:38:42.989405Z INFO bevy_ecs::schedule::ambiguity_detection: Execution order ambiguities detected, you might want to add an explicit dependency relation between some of these systems:
* Parallel systems:
-- "bevy_animation::animation_player" and "bevy_ui::flex::flex_node_system"
conflicts: ["bevy_transform::components::transform::Transform"]
```
## Changelog
Resolved internal execution order ambiguities for:
1. Transform propagation (ignored, we need smarter filter checking).
2. Gamepad processing (fixed).
3. bevy_winit's window handling (fixed).
4. Cascaded shadow maps and perspectives (fixed).
Also fixed a desynchronized state bug that could occur when the `Window` component is removed and then added to the same entity in a single frame.
# Objective
- Fix a bug causing performance to drop over time because the GPU fog buffer was endlessly growing
## Solution
- Clear the fog buffer every frame before populating it
# Objective
- Fix `post_processing` and `shader_prepass` examples as they fail when compiling shaders due to missing shader defs
- Fixes#6799
- Fixes#6996
- Fixes#7375
- Supercedes #6997
- Supercedes #7380
## Solution
- The prepass was broken due to a missing `MAX_CASCADES_PER_LIGHT` shader def. Add it.
- The shader used in the `post_processing` example is applied to a 2D mesh, so use the correct mesh2d_view_bindings shader import.
# Objective
- Trying to make it easier to have a more user friendly debugging name for when you want to print out an entity.
## Solution
- Add a new `WorldQuery` struct `DebugName` to format the `Name` if the entity has one, otherwise formats the `Entity` id.
This means we can do this and get more descriptive errors without much more effort:
```rust
fn my_system(moving: Query<(DebugName, &mut Position, &Velocity)>) {
for (name, mut position, velocity) in &mut moving {
position += velocity;
if position.is_nan() {
error!("{:?} has an invalid position state", name);
}
}
}
```
---
## Changelog
- Added `DebugName` world query for more human friendly debug names of entities.
# Objective
In simple cases we might want to derive the `ExtractComponent` trait.
This adds symmetry to the existing `ExtractResource` derive.
## Solution
Add an implementation of `#[derive(ExtractComponent)]`.
The implementation is adapted from the existing `ExtractResource` derive macro.
Additionally, there is an attribute called `extract_component_filter`. This allows specifying a query filter type used when extracting.
If not specified, no filter (equal to `()`) is used.
So:
```rust
#[derive(Component, Clone, ExtractComponent)]
#[extract_component_filter(With<Fuel>)]
pub struct Car {
pub wheels: usize,
}
```
would expand to (a bit cleaned up here):
```rust
impl ExtractComponent for Car
{
type Query = &'static Self;
type Filter = With<Fuel>;
type Out = Self;
fn extract_component(item: QueryItem<'_, Self::Query>) -> Option<Self::Out> {
Some(item.clone())
}
}
```
---
## Changelog
- Added the ability to `#[derive(ExtractComponent)]` with an optional filter.
# Objective
- Fixes#4592
## Solution
- Implement `SrgbColorSpace` for `u8` via `f32`
- Convert KTX2 R8 and R8G8 non-linear sRGB to wgpu `R8Unorm` and `Rg8Unorm` as non-linear sRGB are not supported by wgpu for these formats
- Convert KTX2 R8G8B8 formats to `Rgba8Unorm` and `Rgba8UnormSrgb` by adding an alpha channel as the Rgb variants don't exist in wgpu
---
## Changelog
- Added: Support for KTX2 `R8_SRGB`, `R8_UNORM`, `R8G8_SRGB`, `R8G8_UNORM`, `R8G8B8_SRGB`, `R8G8B8_UNORM` formats by converting to supported wgpu formats as appropriate
# Objective
Add a `FromReflect` derive to the `Aabb` type, like all other math types, so we can reflect `Vec<Aabb>`.
## Solution
Just add it :)
---
## Changelog
### Added
- Implemented `FromReflect` for `Aabb`.
# Objective
Update Bevy to wgpu 0.15.
## Changelog
- Update to wgpu 0.15, wgpu-hal 0.15.1, and naga 0.11
- Users can now use the [DirectX Shader Compiler](https://github.com/microsoft/DirectXShaderCompiler) (DXC) on Windows with DX12 for faster shader compilation and ShaderModel 6.0+ support (requires `dxcompiler.dll` and `dxil.dll`, which are included in DXC downloads from [here](https://github.com/microsoft/DirectXShaderCompiler/releases/latest))
## Migration Guide
### WGSL Top-Level `let` is now `const`
All top level constants are now declared with `const`, catching up with the wgsl spec.
`let` is no longer allowed at the global scope, only within functions.
```diff
-let SOME_CONSTANT = 12.0;
+const SOME_CONSTANT = 12.0;
```
#### `TextureDescriptor` and `SurfaceConfiguration` now requires a `view_formats` field
The new `view_formats` field in the `TextureDescriptor` is used to specify a list of formats the texture can be re-interpreted to in a texture view. Currently only changing srgb-ness is allowed (ex. `Rgba8Unorm` <=> `Rgba8UnormSrgb`). You should set `view_formats` to `&[]` (empty) unless you have a specific reason not to.
#### The DirectX Shader Compiler (DXC) is now supported on DX12
DXC is now the default shader compiler when using the DX12 backend. DXC is Microsoft's replacement for their legacy FXC compiler, and is faster, less buggy, and allows for modern shader features to be used (ShaderModel 6.0+). DXC requires `dxcompiler.dll` and `dxil.dll` to be available, otherwise it will log a warning and fall back to FXC.
You can get `dxcompiler.dll` and `dxil.dll` by downloading the latest release from [Microsoft's DirectXShaderCompiler github repo](https://github.com/microsoft/DirectXShaderCompiler/releases/latest) and copying them into your project's root directory. These must be included when you distribute your Bevy game/app/etc if you plan on supporting the DX12 backend and are using DXC.
`WgpuSettings` now has a `dx12_shader_compiler` field which can be used to choose between either FXC or DXC (if you pass None for the paths for DXC, it will check for the .dlls in the working directory).
# Objective
- Fix#7315
- Add IME support
## Solution
- Add two new fields to `Window`, to control if IME is enabled and the candidate box position
This allows the use of dead keys which are needed in French, or the full IME experience to type using Pinyin
I also added a basic general text input example that can handle IME input.
https://user-images.githubusercontent.com/8672791/213941353-5ed73a73-5dd1-4e66-a7d6-a69b49694c52.mp4
# Objective
- Make CI friendlier
## Solution
- CI now says hello to new contributor
- for some jobs with non obvious solutions to failures, give more context
- example run should say which example failed
- example doc should say the next action to do (add metadata or run the update script)
- MSRV will say when it needs updating
I'm not completely sure everything is working and will try to trigger failures in this PR
<img width="1392" alt="image" src="https://user-images.githubusercontent.com/418473/203873533-44c029af-13b7-4740-8ea3-af96bd5867c9.png">
<img width="1392" alt="image" src="https://user-images.githubusercontent.com/418473/203873549-36be7a23-b341-42a2-8a9f-ceea8ac7a2b8.png">
# Objective
- Add support for the “classic” distance fog effect, as well as a more advanced atmospheric fog effect.
## Solution
This PR:
- Introduces a new `FogSettings` component that controls distance fog per-camera.
- Adds support for three widely used “traditional” fog falloff modes: `Linear`, `Exponential` and `ExponentialSquared`, as well as a more advanced `Atmospheric` fog;
- Adds support for directional light influence over fog color;
- Extracts fog via `ExtractComponent`, then uses a prepare system that sets up a new dynamic uniform struct (`Fog`), similar to other mesh view types;
- Renders fog in PBR material shader, as a final adjustment to the `output_color`, after PBR is computed (but before tone mapping);
- Adds a new `StandardMaterial` flag to enable fog; (`fog_enabled`)
- Adds convenience methods for easier artistic control when creating non-linear fog types;
- Adds documentation around fog.
---
## Changelog
### Added
- Added support for distance-based fog effects for PBR materials, controllable per-camera via the new `FogSettings` component;
- Added `FogFalloff` enum for selecting between three widely used “traditional” fog falloff modes: `Linear`, `Exponential` and `ExponentialSquared`, as well as a more advanced `Atmospheric` fog;
# Objective
Found while working on #7385.
The struct `EntityMut` has the safety invariant that it's cached `EntityLocation` must always accurately specify where the entity is stored. Thus, any time its location might be invalidated (such as by calling `EntityMut::world_mut` and moving archetypes), the cached location *must* be updated by calling `EntityMut::update_location`.
The method `world_scope` encapsulates this pattern in safe API by requiring world mutations to be done in a closure, after which `update_location` will automatically be called. However, this method has a soundness hole: if a panic occurs within the closure, then `update_location` will never get called. If the panic is caught in an outer scope, then the `EntityMut` will be left with an outdated location, which is undefined behavior.
An example of this can be seen in the unit test `entity_mut_world_scope_panic`, which has been added to this PR as a regression test. Without the other changes in this PR, that test will invoke undefined behavior in safe code.
## Solution
Call `EntityMut::update_location()` from within a `Drop` impl, which ensures that it will get executed even if `EntityMut::world_scope` unwinds.
# Objective
I recently had an issue, where I have a struct:
```
struct Property {
inner: T
}
```
that I use as a wrapper for internal purposes.
I don't want to update my struct definition to
```
struct Property<T: Reflect>{
inner: T
}
```
because I still want to be able to build `Property<T>` for types `T` that are not `Reflect`. (and also because I don't want to update my whole code base with `<T: Reflect>` bounds)
I still wanted to have reflection on it (for `bevy_inspector_egui`), but adding `derive(Reflect)` fails with the error:
`T cannot be sent between threads safely. T needs to implement Sync.`
I believe that `bevy_reflect` should adopt the model of other derives in the case of generics, which is to add the `Reflect` implementation only if the generics also implement `Reflect`. (That is the behaviour of other macros such as `derive(Clone)` or `derive(Debug)`.
It's also the current behavior of `derive(FromReflect)`.
Basically doing something like:
```
impl<T> Reflect for Foo<T>
where T: Reflect
```
## Solution
- I updated the derive macros for `Structs` and `TupleStructs` to add extra `where` bounds.
- Every type that is reflected will need a `T: Reflect` bound
- Ignored types will need a `T: 'static + Send + Sync` bound. Here's the reason. For cases like this:
```
#[derive(Reflect)]
struct Foo<T, U>{
a: T
#[reflect(ignore)]
b: U
}
```
I had to add the bound `'static + Send + Sync` to ignored generics like `U`.
The reason is that we want `Foo<T, U>` to be `Reflect: 'static + Send + Sync`, so `Foo<T, U>` must be able to implement those auto-traits. `Foo<T, U>` will only implement those auto-traits if every generic type implements them, including ignored types.
This means that the previously compile-fail case now compiles:
```
#[derive(Reflect)]
struct Foo<'a> {
#[reflect(ignore)]
value: &'a str,
}
```
But `Foo<'a>` will only be useable in the cases where `'a: 'static` and panic if we don't have `'a: 'static`, which is what we want (nice bonus from this PR ;) )
---
## Changelog
> This section is optional. If this was a trivial fix, or has no externally-visible impact, you can delete this section.
### Added
Possibility to add `derive(Reflect)` to structs and enums that contain generic types, like so:
```
#[derive(Reflect)]
struct Foo<T>{
a: T
}
```
Reflection will only be available if the generic type T also implements `Reflect`.
(previously, this would just return a compiler error)
# Objective
The function `EntityMut::world_scope` is a safe abstraction that allows you to temporarily get mutable access to the underlying `World` of an `EntityMut`. This function is purely stateful, meaning it is not easily possible to return a value from it.
## Solution
Allow returning a computed value from the closure. This is similar to how `World::resource_scope` works.
---
## Changelog
- The function `EntityMut::world_scope` now allows returning a value from the immediately-computed closure.
# Objective
## Use Case
A render node which calls `post_process_write()` on a `ViewTarget` multiple times during a single run of the node means both main textures of this view target is accessed.
If the source texture (which alternate between main textures **a** and **b**) is accessed in a shader during those iterations it means that those textures have to be bound using bind groups.
Preparing bind groups for both main textures ahead of time is desired, which means having access to the _other_ main texture is needed.
## Solution
Add a method on `ViewTarget` for accessing the other main texture.
---
## Changelog
### Added
- `main_texture_other` API on `ViewTarget`
# Objective
There's no period at the end of the first line of the `Name` documentation, and this messes up the grammar of the summary rustdoc creates:
```
↓
Component used to identify an entity. Stores a hash for faster comparisons The hash is eagerly re-computed upon each update to the name.
```
## Solution
I added it.
# Objective
I found several words in code and docs are incorrect. This should be fixed.
## Solution
- Fix several minor typos
Co-authored-by: Chris Ohk <utilforever@gmail.com>
# Objective
Bump the MSRV to 1.67. Enable cleanup PRs like #7346 to work.
## Solution
Bump it to 1.67
---
## Changelog
Changed: The MSRV of the engine is now 1.67.
alternative to #5922, implements #5956
builds on top of https://github.com/bevyengine/bevy/pull/6402
# Objective
https://github.com/bevyengine/bevy/issues/5956 goes into more detail, but the TLDR is:
- bevy systems ensure disjoint accesses to resources and components, and for that to work there are methods `World::get_resource_unchecked_mut(&self)`, ..., `EntityRef::get_mut_unchecked(&self)` etc.
- we don't have these unchecked methods for `by_id` variants, so third-party crate authors cannot build their own safe disjoint-access abstractions with these
- having `_unchecked_mut` methods is not great, because in their presence safe code can accidentally violate subtle invariants. Having to go through `world.as_unsafe_world_cell().unsafe_method()` forces you to stop and think about what you want to write in your `// SAFETY` comment.
The alternative is to keep exposing `_unchecked_mut` variants for every operation that we want third-party crates to build upon, but we'd prefer to avoid using these methods alltogether: https://github.com/bevyengine/bevy/pull/5922#issuecomment-1241954543
Also, this is something that **cannot be implemented outside of bevy**, so having either this PR or #5922 as an escape hatch with lots of discouraging comments would be great.
## Solution
- add `UnsafeWorldCell` with `unsafe fn get_resource(&self)`, `unsafe fn get_resource_mut(&self)`
- add `fn World::as_unsafe_world_cell(&mut self) -> UnsafeWorldCell<'_>` (and `as_unsafe_world_cell_readonly(&self)`)
- add `UnsafeWorldCellEntityRef` with `unsafe fn get`, `unsafe fn get_mut` and the other utilities on `EntityRef` (no methods for spawning, despawning, insertion)
- use the `UnsafeWorldCell` abstraction in `ReflectComponent`, `ReflectResource` and `ReflectAsset`, so these APIs are easier to reason about
- remove `World::get_resource_mut_unchecked`, `EntityRef::get_mut_unchecked` and use `unsafe { world.as_unsafe_world_cell().get_mut() }` and `unsafe { world.as_unsafe_world_cell().get_entity(entity)?.get_mut() }` instead
This PR does **not** make use of `UnsafeWorldCell` for anywhere else in `bevy_ecs` such as `SystemParam` or `Query`. That is a much larger change, and I am convinced that having `UnsafeWorldCell` is already useful for third-party crates.
Implemented API:
```rust
struct World { .. }
impl World {
fn as_unsafe_world_cell(&self) -> UnsafeWorldCell<'_>;
}
struct UnsafeWorldCell<'w>(&'w World);
impl<'w> UnsafeWorldCell {
unsafe fn world(&self) -> &World;
fn get_entity(&self) -> UnsafeWorldCellEntityRef<'w>; // returns 'w which is `'self` of the `World::as_unsafe_world_cell(&'w self)`
unsafe fn get_resource<T>(&self) -> Option<&'w T>;
unsafe fn get_resource_by_id(&self, ComponentId) -> Option<&'w T>;
unsafe fn get_resource_mut<T>(&self) -> Option<Mut<'w, T>>;
unsafe fn get_resource_mut_by_id(&self) -> Option<MutUntyped<'w>>;
unsafe fn get_non_send_resource<T>(&self) -> Option<&'w T>;
unsafe fn get_non_send_resource_mut<T>(&self) -> Option<Mut<'w, T>>>;
// not included: remove, remove_resource, despawn, anything that might change archetypes
}
struct UnsafeWorldCellEntityRef<'w> { .. }
impl UnsafeWorldCellEntityRef<'w> {
unsafe fn get<T>(&self, Entity) -> Option<&'w T>;
unsafe fn get_by_id(&self, Entity, ComponentId) -> Option<Ptr<'w>>;
unsafe fn get_mut<T>(&self, Entity) -> Option<Mut<'w, T>>;
unsafe fn get_mut_by_id(&self, Entity, ComponentId) -> Option<MutUntyped<'w>>;
unsafe fn get_change_ticks<T>(&self, Entity) -> Option<Mut<'w, T>>;
// fn id, archetype, contains, contains_id, containts_type_id
}
```
<details>
<summary>UnsafeWorldCell docs</summary>
Variant of the [`World`] where resource and component accesses takes a `&World`, and the responsibility to avoid
aliasing violations are given to the caller instead of being checked at compile-time by rust's unique XOR shared rule.
### Rationale
In rust, having a `&mut World` means that there are absolutely no other references to the safe world alive at the same time,
without exceptions. Not even unsafe code can change this.
But there are situations where careful shared mutable access through a type is possible and safe. For this, rust provides the [`UnsafeCell`](std::cell::UnsafeCell)
escape hatch, which allows you to get a `*mut T` from a `&UnsafeCell<T>` and around which safe abstractions can be built.
Access to resources and components can be done uniquely using [`World::resource_mut`] and [`World::entity_mut`], and shared using [`World::resource`] and [`World::entity`].
These methods use lifetimes to check at compile time that no aliasing rules are being broken.
This alone is not enough to implement bevy systems where multiple systems can access *disjoint* parts of the world concurrently. For this, bevy stores all values of
resources and components (and [`ComponentTicks`](crate::component::ComponentTicks)) in [`UnsafeCell`](std::cell::UnsafeCell)s, and carefully validates disjoint access patterns using
APIs like [`System::component_access`](crate::system::System::component_access).
A system then can be executed using [`System::run_unsafe`](crate::system::System::run_unsafe) with a `&World` and use methods with interior mutability to access resource values.
access resource values.
### Example Usage
[`UnsafeWorldCell`] can be used as a building block for writing APIs that safely allow disjoint access into the world.
In the following example, the world is split into a resource access half and a component access half, where each one can
safely hand out mutable references.
```rust
use bevy_ecs::world::World;
use bevy_ecs::change_detection::Mut;
use bevy_ecs::system::Resource;
use bevy_ecs::world::unsafe_world_cell_world::UnsafeWorldCell;
// INVARIANT: existance of this struct means that users of it are the only ones being able to access resources in the world
struct OnlyResourceAccessWorld<'w>(UnsafeWorldCell<'w>);
// INVARIANT: existance of this struct means that users of it are the only ones being able to access components in the world
struct OnlyComponentAccessWorld<'w>(UnsafeWorldCell<'w>);
impl<'w> OnlyResourceAccessWorld<'w> {
fn get_resource_mut<T: Resource>(&mut self) -> Option<Mut<'w, T>> {
// SAFETY: resource access is allowed through this UnsafeWorldCell
unsafe { self.0.get_resource_mut::<T>() }
}
}
// impl<'w> OnlyComponentAccessWorld<'w> {
// ...
// }
// the two interior mutable worlds borrow from the `&mut World`, so it cannot be accessed while they are live
fn split_world_access(world: &mut World) -> (OnlyResourceAccessWorld<'_>, OnlyComponentAccessWorld<'_>) {
let resource_access = OnlyResourceAccessWorld(unsafe { world.as_unsafe_world_cell() });
let component_access = OnlyComponentAccessWorld(unsafe { world.as_unsafe_world_cell() });
(resource_access, component_access)
}
```
</details>
# Objective
Prevent things from breaking tomorrow when rust 1.67 is released.
## Solution
Fix a few `uninlined_format_args` lints in recently introduced code.
# Objective
Fixes#6952
## Solution
- Request WGPU capabilities `SAMPLED_TEXTURE_AND_STORAGE_BUFFER_ARRAY_NON_UNIFORM_INDEXING`, `SAMPLER_NON_UNIFORM_INDEXING` and `UNIFORM_BUFFER_AND_STORAGE_TEXTURE_ARRAY_NON_UNIFORM_INDEXING` when corresponding features are enabled.
- Add an example (`shaders/texture_binding_array`) illustrating (and testing) the use of non-uniform indexed textures and samplers.
## Changelog
- Added new capabilities for shader validation.
- Added example `shaders/texture_binding_array`.
Co-authored-by: Robert Swain <robert.swain@gmail.com>
# Objective
Implements cascaded shadow maps for directional lights, which produces better quality shadows without needing excessively large shadow maps.
Fixes#3629
Before
After
## Solution
Rather than rendering a single shadow map for directional light, the view frustum is divided into a series of cascades, each of which gets its own shadow map. The correct cascade is then sampled for shadow determination.
---
## Changelog
Directional lights now use cascaded shadow maps for improved shadow quality.
## Migration Guide
You no longer have to manually specify a `shadow_projection` for a directional light, and these settings should be removed. If customization of how cascaded shadow maps work is desired, modify the `CascadeShadowConfig` component instead.
