# Objective
- The `path` module was getting fairly large.
- The code in `AccessRef::read_element` and mut equivalent was very
complex and difficult to understand.
- The `ReflectPathError` had a lot of variants, and was difficult to
read.
## Solution
- Split the file in two, `access` now has its own module
- Rewrite the `read_element` methods, they were ~200 lines long, they
are now ~70 lines long — I didn't change any of the logic. It's really
just the same code, but error handling is separated.
- Split the `ReflectPathError` error
- Merge `AccessRef` and `Access`
- A few other changes that aim to reduce code complexity
### Fully detailed change list
- `Display` impl of `ParsedPath` now includes prefix dots — this allows
simplifying its implementation, and IMO `.path.to.field` is a better way
to express a "path" than `path.to.field` which could suggest we are
reading the `to` field of a variable named `path`
- Add a test to check that dot prefixes and other are correctly parsed —
Until now, no test contained a prefixing dot
- Merge `Access` and `AccessRef`, using a `Cow<'a, str>`. Generated code
seems to agree with this decision (`ParsedPath::parse` sheds 5% of
instructions)
- Remove `Access::as_ref` since there is no such thing as an `AccessRef`
anymore.
- Rename `AccessRef::to_owned` into `AccessRef::into_owned()` since it
takes ownership of `self` now.
- Add a `parse_static` that doesn't allocate new strings for named
fields!
- Add a section about path reflection in the `bevy_reflect` crate root
doc — I saw a few people that weren't aware of path reflection, so I
thought it was pertinent to add it to the root doc
- a lot of nits
- rename `index` to `offset` when it refers to offset in the path string
— There is no more confusion with the other kind of indices in this
context, also it's a common naming convention for parsing.
- Make a dedicated enum for parsing errors
- rename the `read_element` methods to `element` — shorter, but also
`read_element_mut` was a fairly poor name
- The error values now not only contain the expected type but also the
actual type.
- Remove lifetimes that could be inferred from the `GetPath` trait
methods.
---
## Change log
- Added the `ParsedPath::parse_static` method, avoids allocating when
parsing `&'static str`.
## Migration Guide
If you were matching on the `Err(ReflectPathError)` value returned by
`GetPath` and `ParsedPath` methods, now only the parse-related errors
and the offset are publicly accessible. You can always use the
`fmt::Display` to get a clear error message, but if you need
programmatic access to the error types, please open an issue.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
- attempt to clarify with better docstrings the default behaviour of
WindowPlugin and the component type it accepts.
# Objective
- I'm new to Rust and Bevy, I got a bit confused about how to customise
some window parameters (title, height, width etc) and while the docs do
show the struct code for that field `Option<Window>` I was a bit of a
doofus and skipped that to read the docstring entry for `primary_window`
and then the `Window` component directly which aren't linked together.
This is a minor improvement which I think will help in-case others, like
me, have a doofus moment.
---------
Co-authored-by: Sélène Amanita <134181069+Selene-Amanita@users.noreply.github.com>
# Objective
The documentation for the `print_when_completed` system stated that this
system would tick the `Timer` component on every entity in the scene.
This was incorrect as this system only ticks the `Timer` on entities
with the `PrintOnCompletionTimer` component.
## Solution
We suggest a modification to the documentation of this system to make it
more clear.
# Objective
This PR updates the name of the enum variant used in the docs for
`OrthographicProjection`.
## Solution
- Change the outdated 'WindowScale` to `WindowSize`.
# Objective
- Reduce the number of rebindings to enable batching of draw commands
## Solution
- Use the new `GpuArrayBuffer` for `MeshUniform` data to store all
`MeshUniform` data in arrays within fewer bindings
- Sort opaque/alpha mask prepass, opaque/alpha mask main, and shadow
phases also by the batch per-object data binding dynamic offset to
improve performance on WebGL2.
---
## Changelog
- Changed: Per-object `MeshUniform` data is now managed by
`GpuArrayBuffer` as arrays in buffers that need to be indexed into.
## Migration Guide
Accessing the `model` member of an individual mesh object's shader
`Mesh` struct the old way where each `MeshUniform` was stored at its own
dynamic offset:
```rust
struct Vertex {
@location(0) position: vec3<f32>,
};
fn vertex(vertex: Vertex) -> VertexOutput {
var out: VertexOutput;
out.clip_position = mesh_position_local_to_clip(
mesh.model,
vec4<f32>(vertex.position, 1.0)
);
return out;
}
```
The new way where one needs to index into the array of `Mesh`es for the
batch:
```rust
struct Vertex {
@builtin(instance_index) instance_index: u32,
@location(0) position: vec3<f32>,
};
fn vertex(vertex: Vertex) -> VertexOutput {
var out: VertexOutput;
out.clip_position = mesh_position_local_to_clip(
mesh[vertex.instance_index].model,
vec4<f32>(vertex.position, 1.0)
);
return out;
}
```
Note that using the instance_index is the default way to pass the
per-object index into the shader, but if you wish to do custom rendering
approaches you can pass it in however you like.
---------
Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>
Co-authored-by: Elabajaba <Elabajaba@users.noreply.github.com>
# Objective
My attempt at implementing #7515
## Solution
Added struct `Pitch` and implemented on it `Source` trait.
## Changelog
### Added
- File pitch.rs to bevy_audio crate
- Struct `Pitch` and type aliases for `AudioSourceBundle<Pitch>` and
`SpatialAudioSourceBundle<Pitch>`
- New example showing how to use `PitchBundle`
### Changed
- `AudioPlugin` now adds system for `Pitch` audio
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
The previous formatting didn't render as you'd expect, with 'For CSS
Grid containers' getting adopted by the prior bullet point. Rather than
fixing that directly I opted for a slight reformatting for consistency
with other fields, notably left/right/top/bottom.
# Objective
Fixes#9298 - Default window title leaks "bevy" context
## Solution
I just replaced the literal string "Bevy App" with "App" in Window's
Default trait implementation.
# Objective
Cloning a `WorldQuery` type's "fetch" struct was made unsafe in #5593,
by adding the `unsafe fn clone_fetch` to `WorldQuery`. However, as that
method's documentation explains, it is not the right place to put the
safety invariant:
> While calling this method on its own cannot cause UB it is marked
`unsafe` as the caller must ensure that the returned value is not used
in any way that would cause two `QueryItem<Self>` for the same
`archetype_index` or `table_row` to be alive at the same time.
You can clone a fetch struct all you want and it will never cause
undefined behavior -- in order for something to go wrong, you need to
improperly call `WorldQuery::fetch` with it (which is marked unsafe).
Additionally, making it unsafe to clone a fetch struct does not even
prevent undefined behavior, since there are other ways to incorrectly
use a fetch struct. For example, you could just call fetch more than
once for the same entity, which is not currently forbidden by any
documented invariants.
## Solution
Document a safety invariant on `WorldQuery::fetch` that requires the
caller to not create aliased `WorldQueryItem`s for mutable types. Remove
the `clone_fetch` function, and add the bound `Fetch: Clone` instead.
---
## Changelog
- Removed the associated function `WorldQuery::clone_fetch`, and added a
`Clone` bound to `WorldQuery::Fetch`.
## Migration Guide
### `fetch` invariants
The function `WorldQuery::fetch` has had the following safety invariant
added:
> If this type does not implement `ReadOnlyWorldQuery`, then the caller
must ensure that it is impossible for more than one `Self::Item` to
exist for the same entity at any given time.
This invariant was always required for soundness, but was previously
undocumented. If you called this function manually anywhere, you should
check to make sure that this invariant is not violated.
### Removed `clone_fetch`
The function `WorldQuery::clone_fetch` has been removed. The associated
type `WorldQuery::Fetch` now has the bound `Clone`.
Before:
```rust
struct MyFetch<'w> { ... }
unsafe impl WorldQuery for MyQuery {
...
type Fetch<'w> = MyFetch<'w>
unsafe fn clone_fetch<'w>(fetch: &Self::Fetch<'w>) -> Self::Fetch<'w> {
MyFetch {
field1: fetch.field1,
field2: fetch.field2.clone(),
...
}
}
}
```
After:
```rust
#[derive(Clone)]
struct MyFetch<'w> { ... }
unsafe impl WorldQuery for MyQuery {
...
type Fetch<'w> = MyFetch<'w>;
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fixes https://github.com/bevyengine/bevy/issues/9234
re-breaks: The issues that were linked in #9169
## Solution
Revert the PR that broke tonemapping/postprocessing/etc.
Any passes that are post msaa resolve need to use the main textures, not
the msaa texture.
## Changelog
Idk what to put here since it's a revert.
# Objective
- CI job `check-bans` fails often for unrelated reasons to a PR. Reduce
those failures
## Solution
- Currently, the job only runs if a `Cargo.toml` file changed. This PR
would run the job only if the output of `cargo tree --depth 3` is
different in a PR from main. the job would still always run on main
# Objective
Fixes#9097
## Solution
Reorder the `ExtractSchedule` so that the `extract_text_uinodes` and
`extract_uinode_borders` systems are run after `extract_atlas_uinodes`.
## Changelog
`bevy_ui::render`:
* Added the `ExtractAtlasNode` variant to `RenderUiSystem`.
* Changed `ExtractSchedule` so that `extract_uinode_borders` and
`extract_text_uinodes` run after `extract_atlas_uinodes`.
This is not used directly within the rendering code.
# Objective
- Remove extraneous dependency on `wgpu-hal` as it is not used.
## Solution
- The dependency has been removed and should have no externally visible
impact.
# Objective
The `QueryParIter::for_each_mut` function is required when doing
parallel iteration with mutable queries.
This results in an unfortunate stutter:
`query.par_iter_mut().par_for_each_mut()` ('mut' is repeated).
## Solution
- Make `for_each` compatible with mutable queries, and deprecate
`for_each_mut`. In order to prevent `for_each` from being called
multiple times in parallel, we take ownership of the QueryParIter.
---
## Changelog
- `QueryParIter::for_each` is now compatible with mutable queries.
`for_each_mut` has been deprecated as it is now redundant.
## Migration Guide
The method `QueryParIter::for_each_mut` has been deprecated and is no
longer functional. Use `for_each` instead, which now supports mutable
queries.
```rust
// Before:
query.par_iter_mut().for_each_mut(|x| ...);
// After:
query.par_iter_mut().for_each(|x| ...);
```
The method `QueryParIter::for_each` now takes ownership of the
`QueryParIter`, rather than taking a shared reference.
```rust
// Before:
let par_iter = my_query.par_iter().batching_strategy(my_batching_strategy);
par_iter.for_each(|x| {
// ...Do stuff with x...
par_iter.for_each(|y| {
// ...Do nested stuff with y...
});
});
// After:
my_query.par_iter().batching_strategy(my_batching_strategy).for_each(|x| {
// ...Do stuff with x...
my_query.par_iter().batching_strategy(my_batching_strategy).for_each(|y| {
// ...Do nested stuff with y...
});
});
```
# Objective
Fixes#9121
Context:
- `ImageTextureLoader` depends on `RenderDevice` to work out which
compressed image formats it can support
- `RenderDevice` is initialised by `RenderPlugin`
- https://github.com/bevyengine/bevy/pull/8336 made `RenderPlugin`
initialisation async
- This caused `RenderDevice` to be missing at the time of
`ImageTextureLoader` initialisation, which in turn meant UASTC encoded
ktx2 textures were being converted to unsupported formats, and thus
caused panics
## Solution
- Delay `ImageTextureLoader` initialisation
---
## Changelog
- Moved `ImageTextureLoader` initialisation from `ImagePlugin::build()`
to `ImagePlugin::finish()`
- Default to `CompressedImageFormats::NONE` if `RenderDevice` resource
is missing
---------
Co-authored-by: 66OJ66 <hi0obxud@anonaddy.me>
### **Adopted #6430**
# Objective
`MutUntyped` is the untyped variant of `Mut<T>` that stores a `PtrMut`
instead of a `&mut T`. Working with a `MutUntyped` is a bit annoying,
because as soon you want to use the ptr e.g. as a `&mut dyn Reflect` you
cannot use a type like `Mut<dyn Reflect>` but instead need to carry
around a `&mut dyn Reflect` and a `impl FnMut()` to mark the value as
changed.
## Solution
* Provide a method `map_unchanged` to turn a `MutUntyped` into a
`Mut<T>` by mapping the `PtrMut<'a>` to a `&'a mut T`
This can be used like this:
```rust
// SAFETY: ptr is of type `u8`
let val: Mut<u8> = mut_untyped.map_unchanged(|ptr| unsafe { ptr.deref_mut::<u8>() });
// SAFETY: from the context it is known that `ReflectFromPtr` was made for the type of the `MutUntyped`
let val: Mut<dyn Reflect> = mut_untyped.map_unchanged(|ptr| unsafe { reflect_from_ptr.as_reflect_ptr_mut(ptr) });
```
Note that nothing prevents you from doing
```rust
mut_untyped.map_unchanged(|ptr| &mut ());
```
or using any other mutable reference you can get, but IMO that is fine
since that will only result in a `Mut` that will dereference to that
value and mark the original value as changed. The lifetimes here prevent
anything bad from happening.
## Alternatives
1. Make `Ticks` public and provide a method to get construct a `Mut`
from `Ticks` and `&mut T`. More powerful and more easy to misuse.
2. Do nothing. People can still do everything they want, but they need
to pass (`&mut dyn Reflect, impl FnMut() + '_)` around instead of
`Mut<dyn Reflect>`
## Changelog
- add `MutUntyped::map_unchanged` to turn a `MutUntyped` into its typed
counterpart
---------
Co-authored-by: Jakob Hellermann <jakob.hellermann@protonmail.com>
Co-authored-by: JoJoJet <21144246+JoJoJet@users.noreply.github.com>
# Objective
Fix#8936.
## Solution
Stop using `unwrap` in the core pipelined rendering logic flow.
Separately also scoped the `sub app` span to just running the render app
instead of including the blocking send.
Current unknowns: should we use `std::panic::catch_unwind` around
running the render app? Other engine threads use it defensively, but
we're letting it bubble up here, and a user-created panic could cause a
deadlock if it kills the thread.
---
## Changelog
Fixed: Pipelined rendering should no longer have spurious panics upon
app exit.
# Objective
Implements #9082 but with an option to toggle minimize and close buttons
too.
## Solution
- Added an `enabled_buttons` member to the `Window` struct through which
users can enable or disable specific window control buttons.
---
## Changelog
- Added an `enabled_buttons` member to the `Window` struct through which
users can enable or disable specific window control buttons.
- Added a new system to the `window_settings` example which demonstrates
the toggling functionality.
---
## Migration guide
- Added an `enabled_buttons` member to the `Window` struct through which
users can enable or disable specific window control buttons.
# Objective
Currently the panic message if a duplicate plugin is added isn't really
helpful or at least can be made more useful if it includes the location
where the plugin was added a second time.
## Solution
Add `track_caller` to `add_plugins` and it's called dependencies.
# Objective
This attempts to make the new IRect and URect structs in bevy_math more
similar to the existing Rect struct.
## Solution
Add reflect implementations for IRect and URect, since one already
exists for Rect.
# Objective
- #8960 isn't optimal for very distinct AABB colors, it can be improved
## Solution
We want a function that maps sequential values (entities concurrently
living in a scene _usually_ have ids that are sequential) into very
different colors (the hue component of the color, to be specific)
What we are looking for is a [so-called "low discrepancy"
sequence](https://en.wikipedia.org/wiki/Low-discrepancy_sequence). ie: a
function `f` such as for integers in a given range (eg: 101, 102, 103…),
`f(i)` returns a rational number in the [0..1] range, such as `|f(i) -
f(i±1)| ≈ 0.5` (maximum difference of images for neighboring preimages)
AHash is a good random hasher, but it has relatively high discrepancy,
so we need something else.
Known good low discrepancy sequences are:
#### The [Van Der Corput
sequence](https://en.wikipedia.org/wiki/Van_der_Corput_sequence)
<details><summary>Rust implementation</summary>
```rust
fn van_der_corput(bits: u64) -> f32 {
let leading_zeros = if bits == 0 { 0 } else { bits.leading_zeros() };
let nominator = bits.reverse_bits() >> leading_zeros;
let denominator = bits.next_power_of_two();
nominator as f32 / denominator as f32
}
```
</details>
#### The [Gold Kronecker
sequence](https://extremelearning.com.au/unreasonable-effectiveness-of-quasirandom-sequences/)
<details><summary>Rust implementation</summary>
Note that the implementation suggested in the linked post assumes
floats, we have integers
```rust
fn gold_kronecker(bits: u64) -> f32 {
const U64_MAX_F: f32 = u64::MAX as f32;
// (u64::MAX / Φ) rounded down
const FRAC_U64MAX_GOLDEN_RATIO: u64 = 11400714819323198485;
bits.wrapping_mul(FRAC_U64MAX_GOLDEN_RATIO) as f32 / U64_MAX_F
}
```
</details>
### Comparison of the sequences
So they are both pretty good. Both only have a single (!) division and
two `u32 as f32` conversions.
- Kronecker is resilient to regular sequence (eg: 100, 102, 104, 106)
while this kills Van Der Corput (consider that potentially one entity
out of two spawned might be a mesh)
I made a small app to compare the two sequences, available at:
https://gist.github.com/nicopap/5dd9bd6700c6a9a9cf90c9199941883e
At the top, we have Van Der Corput, at the bottom we have the Gold
Kronecker. In the video, we spawn a vertical line at the position on
screen where the x coordinate is the image of the sequence. The
preimages are 1,2,3,4,… The ideal algorithm would always have the
largest possible gap between each line (imagine the screen x coordinate
as the color hue):
https://github.com/bevyengine/bevy/assets/26321040/349aa8f8-f669-43ba-9842-f9a46945e25c
Here, we repeat the experiment, but with with `entity.to_bits()` instead
of a sequence:
https://github.com/bevyengine/bevy/assets/26321040/516cea27-7135-4daa-a4e7-edfd1781d119
Notice how Van Der Corput tend to bunch the lines on a single side of
the screen. This is because we always skip odd-numbered entities.
Gold Kronecker seems always worse than Van Der Corput, but it is
resilient to finicky stuff like entity indices being multiples of a
number rather than purely sequential, so I prefer it over Van Der
Corput, since we can't really predict how distributed the entity indices
will be.
### Chosen implementation
You'll notice this PR's implementation is not the Golden ratio-based
Kronecker sequence as described in
[tueoqs](https://extremelearning.com.au/unreasonable-effectiveness-of-quasirandom-sequences/).
Why?
tueoqs R function multiplies a rational/float and takes the fractional
part of the result `(x/Φ) % 1`. We start with an integer `u32`. So
instead of converting into float and dividing by Φ (mod 1) we directly
divide by Φ as integer (mod 2³²) both operations are equivalent, the
integer division (which is actually a multiplication by `u32::MAX / Φ`)
is probably faster.
## Acknowledgements
- `inspi` on discord linked me to
https://extremelearning.com.au/unreasonable-effectiveness-of-quasirandom-sequences/
and the wikipedia article.
- [this blog
post](https://probablydance.com/2018/06/16/fibonacci-hashing-the-optimization-that-the-world-forgot-or-a-better-alternative-to-integer-modulo/)
for the idea of multiplying the `u32` rather than the `f32`.
- `nakedible` for suggesting the `index()` over `to_bits()` which
considerably reduces generated code (goes from 50 to 11 instructions)
# Objective
- Add a type for uploading a Rust `Vec<T>` to a GPU `array<T>`.
- Makes progress towards https://github.com/bevyengine/bevy/issues/89.
## Solution
- Port @superdump's `BatchedUniformBuffer` to bevy main, as a fallback
for WebGL2, which doesn't support storage buffers.
- Rather than getting an `array<T>` in a shader, you get an `array<T,
N>`, and have to rebind every N elements via dynamic offsets.
- Add `GpuArrayBuffer` to abstract over
`StorageBuffer<Vec<T>>`/`BatchedUniformBuffer`.
## Future Work
Add a shader macro kinda thing to abstract over the following
automatically:
https://github.com/bevyengine/bevy/pull/8204#pullrequestreview-1396911727
---
## Changelog
* Added `GpuArrayBuffer`, `GpuComponentArrayBufferPlugin`,
`GpuArrayBufferable`, and `GpuArrayBufferIndex` types.
* Added `DynamicUniformBuffer::new_with_alignment()`.
---------
Co-authored-by: Robert Swain <robert.swain@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: Teodor Tanasoaia <28601907+teoxoy@users.noreply.github.com>
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
Co-authored-by: Vincent <9408210+konsolas@users.noreply.github.com>
Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>
# Objective
Fixes#9200
Switches ()'s to []'s when talking about the optional `_mut` suffix in
the ECS Query Struct page to have more idiomatic docs.
## Solution
Replace `()` with `[]` in appropriate doc pages.
When building Bevy using Bazel, you don't need a 'Cargo.toml'... except
Bevy requires it currently. Hopefully this can help illuminate the
requirement.
# Objective
I recently started exploring Bazel and Buck2. Currently Bazel has some
great advantages over Cargo for me and I was pretty happy to find that
things generally work quite well!
Once I added a target to my test project that depended on bevy but
didn't use Cargo, I didn't create a Cargo.toml file for it and things
appeared to work, but as soon as I went to derive from Component the
build failed with the cryptic error:
```
ERROR: /Users/photex/workspaces/personal/mb-rogue/scratch/BUILD:24:12: Compiling Rust bin hello_bevy (0 files) failed: (Exit 1): process_wrapper failed: error executing command (from target //scratch:hello_bevy) bazel-out/darwin_arm64-opt-exec-2B5CBBC6/bin/external/rules_rust/util/process_wrapper/process_wrapper --arg-file ... (remaining 312 arguments skipped)
error: proc-macro derive panicked
--> scratch/hello_bevy.rs:5:10
|
5 | #[derive(Component)]
| ^^^^^^^^^
|
= help: message: called `Result::unwrap()` on an `Err` value: Os { code: 2, kind: NotFound, message: "No such file or directory" }
error: proc-macro derive panicked
--> scratch/hello_bevy.rs:8:10
|
8 | #[derive(Component)]
| ^^^^^^^^^
|
= help: message: called `Result::unwrap()` on an `Err` value: Os { code: 2, kind: NotFound, message: "No such file or directory" }
```
## Solution
After poking around I realized that the proc macros in Bevy all use
bevy_macro_utils::BevyManifest, which was attempting to load a Cargo
manifest that doesn't exist.
This PR doesn't address the Cargo requirement (I'd love to see if there
was a way to support more than Cargo transparently), but it *does*
replace some calls to unwrap with expect and hopefully the error
messages will be more helpful for other folks like me hoping to pat down
a new trail:
```
ERROR: /Users/photex/workspaces/personal/mb-rogue/scratch/BUILD:23:12: Compiling Rust bin hello_bevy (0 files) failed: (Exit 1): process_wrapper failed: error executing command (from target //scratch:hello_bevy) bazel-out/darwin_arm64-opt-exec-2B5CBBC6/bin/external/rules_rust/util/process_wrapper/process_wrapper --arg-file ... (remaining 312 arguments skipped)
error: proc-macro derive panicked
--> scratch/hello_bevy.rs:5:10
|
5 | #[derive(Component)]
| ^^^^^^^^^
|
= help: message: Unable to read cargo manifest: /private/var/tmp/_bazel_photex/135f23dc56826c24d6c3c9f6b688b2fe/execroot/__main__/scratch/Cargo.toml: Os { code: 2, kind: NotFound, message: "No such file or directory" }
error: proc-macro derive panicked
--> scratch/hello_bevy.rs:8:10
|
8 | #[derive(Component)]
| ^^^^^^^^^
|
= help: message: Unable to read cargo manifest: /private/var/tmp/_bazel_photex/135f23dc56826c24d6c3c9f6b688b2fe/execroot/__main__/scratch/Cargo.toml: Os { code: 2, kind: NotFound, message: "No such file or directory" }
```
Co-authored-by: Chip Collier <chip.collier@avid.com>
# Objective
Fixes#8894Fixes#7944
## Solution
The UI pipeline's `MultisampleState::count` is set to 1 whereas the
`MultisampleState::count` for the camera's ViewTarget is taken from the
`Msaa` resource, and corruption occurs when these two values are
different.
This PR solves the problem by setting `MultisampleState::count` for the
UI pipeline to the value from the Msaa resource too.
I don't know much about Bevy's rendering internals or graphics hardware,
so maybe there is a better solution than this. UI MSAA was probably
disabled for a good reason (performance?).
## Changelog
* Enabled multisampling for the UI pipeline.
# Objective
- in #9168 I did some change to the showcase script, introducing the
notion of web api and setting the default Web API to webgl2
- that script was actually only called for webgpu example, so that
should have been the default value
# Objective
- Building all examples at once in CI takes too long
- Tool can only build for WebGPU
## Solution
- Add pagination to commands
- Add option to build examples for WebGL2
- Add option to build Zola files for WebGL2
# Objective
AssetPath shader imports check if the shader is added using the path
without quotes. this causes them to be re-added even if already present,
which can cause previous dependents to get unloaded leading to a
"missing import" error.
## Solution
fix the module name of AssetPath shaders used for checking if it's
already added to correctly use the quoted name.
# Objective
In
[`AssetLoader::load()`](https://docs.rs/bevy/0.11.0/bevy/asset/trait.AssetLoader.html#tymethod.load),
I have an
[`AssetPath`](https://docs.rs/bevy/0.11.0/bevy/asset/struct.AssetPath.html)
to a dependency asset.
I get a handle to this dependency asset using
[`LoadContext::get_handle()`](https://docs.rs/bevy/0.11.0/bevy/asset/struct.LoadContext.html#method.get_handle)
passing the `AssetPath`. But I also need to pass this `AssetPath` to
[`LoadedAsset::with_dependency()`](https://docs.rs/bevy/0.11.0/bevy/asset/struct.LoadedAsset.html#method.with_dependency)
later.
The current solution for this problem is either use `clone()`, but
`AssetPath` may contains owned data.
```rust
let dependency_path: AssetPath = _;
let dependency = load_context.get_handle(dependency_path.clone());
// ...
load_context.set_default_asset(LoadedAsset::new(my_asset).with_dependency(dependency_path));
```
Or to use `AssetPathId::from(&path)` which is a bit verbose.
```rust
let dependency_path: AssetPath = _;
let dependency = load_context.get_handle(AssetPathId::from(&dependency_path));
// ...
load_context.set_default_asset(LoadedAsset::new(my_asset).with_dependency(dependency_path));
```
Ideal solution (introduced by this PR) is to pass a reference to
`get_handle()`.
```rust
let dependency_path: AssetPath = _;
let dependency = load_context.get_handle(&dependency_path);
// ...
load_context.set_default_asset(LoadedAsset::new(my_asset).with_dependency(dependency_path));
```
## Solution
Implement `From<&AssetPath>` for `HandleId`
---
## Changelog
- Added: `HandleId` can be build from a reference to `AssetPath`.
# Objective
Continue #7867 now that we have URect #7984
- Return `URect` instead of `(UVec2, UVec2)` in
`Camera::physical_viewport_rect`
- Add `URect` and `IRect` to prelude
## Changelog
- Changed `Camera::physical_viewport_rect` return type from `(UVec2,
UVec2)` to `URect`
- `URect` and `IRect` were added to prelude
## Migration Guide
Before:
```rust
fn view_physical_camera_rect(camera_query: Query<&Camera>) {
let camera = camera_query.single();
let Some((min, max)) = camera.physical_viewport_rect() else { return };
dbg!(min, max);
}
```
After:
```rust
fn view_physical_camera_rect(camera_query: Query<&Camera>) {
let camera = camera_query.single();
let Some(URect { min, max }) = camera.physical_viewport_rect() else { return };
dbg!(min, max);
}
```
# Objective
Gizmos are intended to draw over everything but for some reason I set
the sort key to `0` during #8427 :v
I didn't catch this mistake because it still draws over sprites with a Z
translation of `0`.
## Solution
Set the sort key to `f32::INFINITY`.
# Objective
Some of the conversion methods on the new rect types introduced in #7984
have misleading names.
## Solution
Rename all methods returning an `IRect` to `as_irect` and all methods
returning a `URect` to `as_urect`.
## Migration Guide
Replace uses of the old method names with the new method names.
# Objective
In my application, I'm manually wrapping the built-in Bevy loaders with
a wrapper loader that stores some metadata before calling into the inner
Bevy loader. This worked for the glTF loader in Bevy 0.10, but in Bevy
0.11 it became impossible to do this because the glTF loader became
unconstructible outside Bevy due to the new private fields within it.
It's now in fact impossible to get a reference to a GltfLoader at all
from outside Bevy, because the only way to construct a GltfLoader is to
add the GltfPlugin to an App, and the GltfPlugin only hands out
references to its GltfLoader to the asset server, which provides no
public access to the loaders it manages.
## Solution
This commit fixes the problem by adding a public `new` method to allow
manual construction of a glTF loader.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
In both Text2d and Bevy UI text because of incorrect text size and
alignment calculations if a block of text has empty leading lines then
those lines are ignored. Also, depending on the font size when leading
empty lines are ignored the same number of lines of text can go missing
from the bottom of the text block.
## Example (from murtaugh on discord)
```rust
use bevy::prelude::*;
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.add_systems(Startup, setup)
.run();
}
fn setup(mut commands: Commands) {
commands.spawn(Camera2dBundle::default());
let text = "\nfirst line\nsecond line\nthird line\n";
commands.spawn(TextBundle {
text: Text::from_section(
text.to_string(),
TextStyle {
font_size: 60.0,
color: Color::YELLOW,
..Default::default()
},
),
style: Style {
position_type: PositionType::Absolute,
..Default::default()
},
background_color: BackgroundColor(Color::RED),
..Default::default()
});
}
```
## Solution
`TextPipeline::queue_text`,
`TextMeasureInfo::compute_size_from_section_texts` and
`GlyphBrush::process_glyphs` each have a nearly duplicate section of
code that calculates the minimum bounds around a list of text sections.
The first two functions don't apply any rounding, but `process_glyphs`
also floors all the values. It seems like this difference can cause
conflicts where the text gets incorrectly shaped.
Also when Bevy computes the text bounds it chooses the smallest possible
rect that fits all the glyphs, ignoring white space. The glyphs are then
realigned vertically so the first glyph is on the top line. Any empty
leading lines are missed.
This PR adds a function `compute_text_bounds` that replaces the
duplicate code, so the text bounds are rounded the same way by each
function. Also, since Bevy doesn't use `ab_glyph` to control vertical
alignment, the minimum y bound is just always set to 0 which ensures no
leading empty lines will be missed.
There is another problem in that trailing empty lines are also ignored,
but that's more difficult to deal with and much less important than the
other issues, so I'll leave it for another PR.
<img width="462" alt="fixed_text_align_bounds"
src="https://github.com/bevyengine/bevy/assets/27962798/85e32e2c-d68f-4677-8e87-38e27ade4487">
---
## Changelog
Added a new function `compute_text_bounds` to the `glyph_brush` module
that replaces the text size and bounds calculations in
`TextPipeline::queue_text`,
`TextMeasureInfo::compute_size_from_section_texts` and
`GlyphBrush::process_glyphs`. The text bounds are calculated identically
in each function and the minimum y bound is not derived from the glyphs
but is always set to 0.
# Objective
`ExtractedUiNodes` is cleared by the `extract_uinodes` function during
the extraction schedule. Because the Bevy UI renderer uses a painters
algorithm, this makes it impossible for users to create a custom
extraction function that adds items for a node to be drawn behind the
rectangle added by `extract_uniodes`.
## Solution
Drain `ExtractedUiNodes` in `prepare_ui_nodes` instead, after the
extraction schedule has finished.
