unleashed-firmware/targets/f7/furi_hal/furi_hal_resources.h

233 lines
5.9 KiB
C
Raw Normal View History

#pragma once
#include <furi.h>
#include <furi_hal_adc.h>
#ifdef __cplusplus
extern "C" {
#endif
/* Input Related Constants */
#define INPUT_DEBOUNCE_TICKS 4
/* Input Keys */
typedef enum {
InputKeyUp,
InputKeyDown,
InputKeyRight,
InputKeyLeft,
InputKeyOk,
InputKeyBack,
InputKeyMAX, /**< Special value */
} InputKey;
/* Light */
typedef enum {
LightRed = (1 << 0),
LightGreen = (1 << 1),
LightBlue = (1 << 2),
LightBacklight = (1 << 3),
} Light;
typedef struct {
const GpioPin* gpio;
const InputKey key;
const bool inverted;
const char* name;
} InputPin;
typedef struct {
const GpioPin* pin;
const char* name;
const FuriHalAdcChannel channel;
const uint8_t number;
const bool debug;
} GpioPinRecord;
extern const InputPin input_pins[];
extern const size_t input_pins_count;
extern const GpioPinRecord gpio_pins[];
extern const size_t gpio_pins_count;
extern const GpioPin gpio_swdio;
extern const GpioPin gpio_swclk;
extern const GpioPin gpio_vibro;
extern const GpioPin gpio_ibutton;
extern const GpioPin gpio_cc1101_g0;
extern const GpioPin gpio_rf_sw_0;
extern const GpioPin gpio_subghz_cs;
extern const GpioPin gpio_display_cs;
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168) * Disable USART in sleep * Restore UART state on suspend/resume * FuriHal: Enable stop mode and add insomnia to I2C and SPI * Remove IDLE interrupt * FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep * FuriHal: tie stop mode debug with debug rtc flag * FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag * FuriHal: move resource init to early stage * Add EXTI pending check, enable debug traps with compile-time flag * Wrap sleep debug functions in conditional compilation * Remove erroneous changed * Do not use CSS, remove it from everywhere * Enable/disable USB on VBUS connect (prototype) * FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores * FuriHal: honor c1 LMPS * USB mode switch fix * Applications: add flags and insomnia bypass system * Correct spelling * FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api * FuriHal: extra check on reinit request * FuriHal: rename gpio_display_rst pin to gpio_display_rst_n * FuriHal: add debug HAL * FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit * FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag * FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works * FuriHal: take insomnia while shutdown * Remove USB switch on/off on VBUS change * Better tick skew handling * Improve tick consistency under load * Add USB_HP dummy IRQ handler * Move interrupt check closer to sleep * Clean up includes * Re-enable Insomnia globally * FuriHal: enable CSS * FuriHal: remove questionable core2 clock shenanigans * FuriHal: use core1 RCC registers in idle timer config * FuriHal: return back CSS handlers, add lptim isr dispatching Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 13:29:51 +00:00
extern const GpioPin gpio_display_rst_n;
extern const GpioPin gpio_display_di;
extern const GpioPin gpio_sdcard_cs;
extern const GpioPin gpio_sdcard_cd;
extern const GpioPin gpio_nfc_cs;
[FL-2263] Flasher service & RAM exec (#1006) * WIP on stripping fw * Compact FW build - use RAM_EXEC=1 COMPACT=1 DEBUG=0 * Fixed uninitialized storage struct; small fixes to compact fw * Flasher srv w/mocked flash ops * Fixed typos & accomodated FFF changes * Alternative fw startup branch * Working load & jmp to RAM fw * +manifest processing for stage loader; + crc verification for stage payload * Fixed questionable code & potential leaks * Lowered screen update rate; added radio stack update stubs; working dfu write * Console EP with manifest & stage validation * Added microtar lib; minor ui fixes for updater * Removed microtar * Removed mtar #2 * Added a better version of microtar * TAR archive api; LFS backup & restore core * Recursive backup/restore * LFS worker thread * Added system apps to loader - not visible in UI; full update process with restarts * Typo fix * Dropped BL & f6; tooling for updater WIP * Minor py fixes * Minor fixes to make it build after merge * Ported flash workaround from BL + fixed visuals * Minor cleanup * Chmod + loader app search fix * Python linter fix * Removed usb stuff & float read support for staged loader == -10% of binary size * Added backup/restore & update pb requests * Added stub impl to RPC for backup/restore/update commands * Reworked TAR to use borrowed Storage api; slightly reduced build size by removing `static string`; hidden update-related RPC behind defines * Moved backup&restore to storage * Fixed new message types * Backup/restore/update RPC impl * Moved furi_hal_crc to LL; minor fixes * CRC HAL rework to LL * Purging STM HAL * Brought back minimal DFU boot mode (no gui); additional crc state checks * Added splash screen, BROKEN usb function * Clock init rework WIP * Stripped graphics from DFU mode * Temp fix for unused static fun * WIP update picker - broken! * Fixed UI * Bumping version * Fixed RTC setup * Backup to update folder instead of ext root * Removed unused scenes & more usb remnants from staged loader * CI updates * Fixed update bundle name * Temporary restored USB handler * Attempt to prevent .text corruption * Comments on how I spent this Saturday * Added update file icon * Documentation updates * Moved common code to lib folder * Storage: more unit tests * Storage: blocking dir open, differentiate file and dir when freed. * Major refactoring; added input processing to updater to allow retrying on failures (not very useful prob). Added API for extraction of thread return value * Removed re-init check for manifest * Changed low-level path manipulation to toolbox/path.h; makefile cleanup; tiny fix in lint.py * Increased update worker stack size * Text fixes in backup CLI * Displaying number of update stages to run; removed timeout in handling errors * Bumping version * Added thread cleanup for spawner thread * Updated build targets to exclude firmware bundle from 'ALL' * Fixed makefile for update_package; skipping VCP init for update mode (ugly) * Switched github build from ALL to update_package * Added +x for dist_update.sh * Cli: add total heap size to "free" command * Moved (RAM) suffix to build version instead of git commit no. * DFU comment * Some fixes suggested by clang-tidy * Fixed recursive PREFIX macro * Makefile: gather all new rules in updater namespace. FuriHal: rename bootloader to boot, isr safe delays * Github: correct build target name in firmware build * FuriHal: move target switch to boot * Makefile: fix firmware flash * Furi, FuriHal: move kernel start to furi, early init * Drop bootloader related stuff * Drop cube. Drop bootloader linker script. * Renamed update_hl, moved constants to #defines * Moved update-related boot mode to separate bitfield * Reworked updater cli to single entry point; fixed crash on tar cleanup * Added Python replacement for dist shell scripts * Linter fixes for dist.py +x * Fixes for environment suffix * Dropped bash scripts * Added dirty build flag to version structure & interfaces * Version string escapes * Fixed flag logic in dist.py; added support for App instances being imported and not terminating the whole program * Fixed fw address in ReadMe.md * Rpc: fix crash on double screen start * Return back original boot behavior and fix jump to system bootloader * Cleanup code, add error sequence for RTC * Update firmware readme * FuriHal: drop boot, restructure RTC registers usage and add header register check * Furi goes first * Toolchain: add ccache support * Renamed update bundle dir Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com> Co-authored-by: あく <alleteam@gmail.com>
2022-04-13 20:50:25 +00:00
extern const GpioPin gpio_button_up;
extern const GpioPin gpio_button_down;
extern const GpioPin gpio_button_right;
extern const GpioPin gpio_button_left;
extern const GpioPin gpio_button_ok;
extern const GpioPin gpio_button_back;
extern const GpioPin gpio_spi_d_miso;
extern const GpioPin gpio_spi_d_mosi;
extern const GpioPin gpio_spi_d_sck;
extern const GpioPin gpio_spi_r_miso;
extern const GpioPin gpio_spi_r_mosi;
extern const GpioPin gpio_spi_r_sck;
extern const GpioPin gpio_ext_pc0;
extern const GpioPin gpio_ext_pc1;
extern const GpioPin gpio_ext_pc3;
extern const GpioPin gpio_ext_pb2;
extern const GpioPin gpio_ext_pb3;
extern const GpioPin gpio_ext_pa4;
extern const GpioPin gpio_ext_pa6;
extern const GpioPin gpio_ext_pa7;
extern const GpioPin gpio_nfc_irq_rfid_pull;
extern const GpioPin gpio_rfid_carrier_out;
extern const GpioPin gpio_rfid_data_in;
extern const GpioPin gpio_rfid_carrier;
extern const GpioPin gpio_infrared_rx;
extern const GpioPin gpio_infrared_tx;
extern const GpioPin gpio_usart_tx;
extern const GpioPin gpio_usart_rx;
extern const GpioPin gpio_i2c_power_sda;
extern const GpioPin gpio_i2c_power_scl;
extern const GpioPin gpio_speaker;
extern const GpioPin gpio_periph_power;
[FL-2263] Flasher service & RAM exec (#1006) * WIP on stripping fw * Compact FW build - use RAM_EXEC=1 COMPACT=1 DEBUG=0 * Fixed uninitialized storage struct; small fixes to compact fw * Flasher srv w/mocked flash ops * Fixed typos & accomodated FFF changes * Alternative fw startup branch * Working load & jmp to RAM fw * +manifest processing for stage loader; + crc verification for stage payload * Fixed questionable code & potential leaks * Lowered screen update rate; added radio stack update stubs; working dfu write * Console EP with manifest & stage validation * Added microtar lib; minor ui fixes for updater * Removed microtar * Removed mtar #2 * Added a better version of microtar * TAR archive api; LFS backup & restore core * Recursive backup/restore * LFS worker thread * Added system apps to loader - not visible in UI; full update process with restarts * Typo fix * Dropped BL & f6; tooling for updater WIP * Minor py fixes * Minor fixes to make it build after merge * Ported flash workaround from BL + fixed visuals * Minor cleanup * Chmod + loader app search fix * Python linter fix * Removed usb stuff & float read support for staged loader == -10% of binary size * Added backup/restore & update pb requests * Added stub impl to RPC for backup/restore/update commands * Reworked TAR to use borrowed Storage api; slightly reduced build size by removing `static string`; hidden update-related RPC behind defines * Moved backup&restore to storage * Fixed new message types * Backup/restore/update RPC impl * Moved furi_hal_crc to LL; minor fixes * CRC HAL rework to LL * Purging STM HAL * Brought back minimal DFU boot mode (no gui); additional crc state checks * Added splash screen, BROKEN usb function * Clock init rework WIP * Stripped graphics from DFU mode * Temp fix for unused static fun * WIP update picker - broken! * Fixed UI * Bumping version * Fixed RTC setup * Backup to update folder instead of ext root * Removed unused scenes & more usb remnants from staged loader * CI updates * Fixed update bundle name * Temporary restored USB handler * Attempt to prevent .text corruption * Comments on how I spent this Saturday * Added update file icon * Documentation updates * Moved common code to lib folder * Storage: more unit tests * Storage: blocking dir open, differentiate file and dir when freed. * Major refactoring; added input processing to updater to allow retrying on failures (not very useful prob). Added API for extraction of thread return value * Removed re-init check for manifest * Changed low-level path manipulation to toolbox/path.h; makefile cleanup; tiny fix in lint.py * Increased update worker stack size * Text fixes in backup CLI * Displaying number of update stages to run; removed timeout in handling errors * Bumping version * Added thread cleanup for spawner thread * Updated build targets to exclude firmware bundle from 'ALL' * Fixed makefile for update_package; skipping VCP init for update mode (ugly) * Switched github build from ALL to update_package * Added +x for dist_update.sh * Cli: add total heap size to "free" command * Moved (RAM) suffix to build version instead of git commit no. * DFU comment * Some fixes suggested by clang-tidy * Fixed recursive PREFIX macro * Makefile: gather all new rules in updater namespace. FuriHal: rename bootloader to boot, isr safe delays * Github: correct build target name in firmware build * FuriHal: move target switch to boot * Makefile: fix firmware flash * Furi, FuriHal: move kernel start to furi, early init * Drop bootloader related stuff * Drop cube. Drop bootloader linker script. * Renamed update_hl, moved constants to #defines * Moved update-related boot mode to separate bitfield * Reworked updater cli to single entry point; fixed crash on tar cleanup * Added Python replacement for dist shell scripts * Linter fixes for dist.py +x * Fixes for environment suffix * Dropped bash scripts * Added dirty build flag to version structure & interfaces * Version string escapes * Fixed flag logic in dist.py; added support for App instances being imported and not terminating the whole program * Fixed fw address in ReadMe.md * Rpc: fix crash on double screen start * Return back original boot behavior and fix jump to system bootloader * Cleanup code, add error sequence for RTC * Update firmware readme * FuriHal: drop boot, restructure RTC registers usage and add header register check * Furi goes first * Toolchain: add ccache support * Renamed update bundle dir Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com> Co-authored-by: あく <alleteam@gmail.com>
2022-04-13 20:50:25 +00:00
extern const GpioPin gpio_usb_dm;
extern const GpioPin gpio_usb_dp;
#define BUTTON_BACK_GPIO_Port GPIOC
#define BUTTON_BACK_Pin LL_GPIO_PIN_13
#define BUTTON_DOWN_GPIO_Port GPIOC
#define BUTTON_DOWN_Pin LL_GPIO_PIN_6
#define BUTTON_LEFT_GPIO_Port GPIOB
#define BUTTON_LEFT_Pin LL_GPIO_PIN_11
#define BUTTON_OK_GPIO_Port GPIOH
#define BUTTON_OK_Pin LL_GPIO_PIN_3
#define BUTTON_RIGHT_GPIO_Port GPIOB
#define BUTTON_RIGHT_Pin LL_GPIO_PIN_12
#define BUTTON_UP_GPIO_Port GPIOB
#define BUTTON_UP_Pin LL_GPIO_PIN_10
#define CC1101_CS_GPIO_Port GPIOD
#define CC1101_CS_Pin LL_GPIO_PIN_0
#define CC1101_G0_GPIO_Port GPIOA
#define CC1101_G0_Pin LL_GPIO_PIN_1
#define DISPLAY_CS_GPIO_Port GPIOC
#define DISPLAY_CS_Pin LL_GPIO_PIN_11
#define DISPLAY_DI_GPIO_Port GPIOB
#define DISPLAY_DI_Pin LL_GPIO_PIN_1
#define DISPLAY_RST_GPIO_Port GPIOB
#define DISPLAY_RST_Pin LL_GPIO_PIN_0
#define IR_RX_GPIO_Port GPIOA
#define IR_RX_Pin LL_GPIO_PIN_0
#define IR_TX_GPIO_Port GPIOB
#define IR_TX_Pin LL_GPIO_PIN_9
#define NFC_CS_GPIO_Port GPIOE
#define NFC_CS_Pin LL_GPIO_PIN_4
#define PA4_GPIO_Port GPIOA
#define PA4_Pin LL_GPIO_PIN_4
#define PA6_GPIO_Port GPIOA
#define PA6_Pin LL_GPIO_PIN_6
#define PA7_GPIO_Port GPIOA
#define PA7_Pin LL_GPIO_PIN_7
#define PB2_GPIO_Port GPIOB
#define PB2_Pin LL_GPIO_PIN_2
#define PB3_GPIO_Port GPIOB
#define PB3_Pin LL_GPIO_PIN_3
#define PC0_GPIO_Port GPIOC
#define PC0_Pin LL_GPIO_PIN_0
#define PC1_GPIO_Port GPIOC
#define PC1_Pin LL_GPIO_PIN_1
#define PC3_GPIO_Port GPIOC
#define PC3_Pin LL_GPIO_PIN_3
#define QUARTZ_32MHZ_IN_GPIO_Port GPIOC
#define QUARTZ_32MHZ_IN_Pin LL_GPIO_PIN_14
#define QUARTZ_32MHZ_OUT_GPIO_Port GPIOC
#define QUARTZ_32MHZ_OUT_Pin LL_GPIO_PIN_15
#define RFID_OUT_GPIO_Port GPIOB
#define RFID_OUT_Pin LL_GPIO_PIN_13
#define RFID_PULL_GPIO_Port GPIOA
#define RFID_PULL_Pin LL_GPIO_PIN_2
#define RFID_RF_IN_GPIO_Port GPIOC
#define RFID_RF_IN_Pin LL_GPIO_PIN_5
#define RFID_CARRIER_GPIO_Port GPIOA
#define RFID_CARRIER_Pin LL_GPIO_PIN_15
#define RF_SW_0_GPIO_Port GPIOC
#define RF_SW_0_Pin LL_GPIO_PIN_4
#define SD_CD_GPIO_Port GPIOC
#define SD_CD_Pin LL_GPIO_PIN_10
#define SD_CS_GPIO_Port GPIOC
#define SD_CS_Pin LL_GPIO_PIN_12
#define SPEAKER_GPIO_Port GPIOB
#define SPEAKER_Pin LL_GPIO_PIN_8
#define VIBRO_GPIO_Port GPIOA
#define VIBRO_Pin LL_GPIO_PIN_8
#define iBTN_GPIO_Port GPIOB
#define iBTN_Pin LL_GPIO_PIN_14
#define USART1_TX_Pin LL_GPIO_PIN_6
#define USART1_TX_Port GPIOB
#define USART1_RX_Pin LL_GPIO_PIN_7
#define USART1_RX_Port GPIOB
#define SPI_D_MISO_GPIO_Port GPIOC
#define SPI_D_MISO_Pin LL_GPIO_PIN_2
#define SPI_D_MOSI_GPIO_Port GPIOB
#define SPI_D_MOSI_Pin LL_GPIO_PIN_15
#define SPI_D_SCK_GPIO_Port GPIOD
#define SPI_D_SCK_Pin LL_GPIO_PIN_1
#define SPI_R_MISO_GPIO_Port GPIOB
#define SPI_R_MISO_Pin LL_GPIO_PIN_4
#define SPI_R_MOSI_GPIO_Port GPIOB
#define SPI_R_MOSI_Pin LL_GPIO_PIN_5
#define SPI_R_SCK_GPIO_Port GPIOA
#define SPI_R_SCK_Pin LL_GPIO_PIN_5
#define NFC_IRQ_Pin RFID_PULL_Pin
#define NFC_IRQ_GPIO_Port RFID_PULL_GPIO_Port
void furi_hal_resources_init_early(void);
[FL-2263] Flasher service & RAM exec (#1006) * WIP on stripping fw * Compact FW build - use RAM_EXEC=1 COMPACT=1 DEBUG=0 * Fixed uninitialized storage struct; small fixes to compact fw * Flasher srv w/mocked flash ops * Fixed typos & accomodated FFF changes * Alternative fw startup branch * Working load & jmp to RAM fw * +manifest processing for stage loader; + crc verification for stage payload * Fixed questionable code & potential leaks * Lowered screen update rate; added radio stack update stubs; working dfu write * Console EP with manifest & stage validation * Added microtar lib; minor ui fixes for updater * Removed microtar * Removed mtar #2 * Added a better version of microtar * TAR archive api; LFS backup & restore core * Recursive backup/restore * LFS worker thread * Added system apps to loader - not visible in UI; full update process with restarts * Typo fix * Dropped BL & f6; tooling for updater WIP * Minor py fixes * Minor fixes to make it build after merge * Ported flash workaround from BL + fixed visuals * Minor cleanup * Chmod + loader app search fix * Python linter fix * Removed usb stuff & float read support for staged loader == -10% of binary size * Added backup/restore & update pb requests * Added stub impl to RPC for backup/restore/update commands * Reworked TAR to use borrowed Storage api; slightly reduced build size by removing `static string`; hidden update-related RPC behind defines * Moved backup&restore to storage * Fixed new message types * Backup/restore/update RPC impl * Moved furi_hal_crc to LL; minor fixes * CRC HAL rework to LL * Purging STM HAL * Brought back minimal DFU boot mode (no gui); additional crc state checks * Added splash screen, BROKEN usb function * Clock init rework WIP * Stripped graphics from DFU mode * Temp fix for unused static fun * WIP update picker - broken! * Fixed UI * Bumping version * Fixed RTC setup * Backup to update folder instead of ext root * Removed unused scenes & more usb remnants from staged loader * CI updates * Fixed update bundle name * Temporary restored USB handler * Attempt to prevent .text corruption * Comments on how I spent this Saturday * Added update file icon * Documentation updates * Moved common code to lib folder * Storage: more unit tests * Storage: blocking dir open, differentiate file and dir when freed. * Major refactoring; added input processing to updater to allow retrying on failures (not very useful prob). Added API for extraction of thread return value * Removed re-init check for manifest * Changed low-level path manipulation to toolbox/path.h; makefile cleanup; tiny fix in lint.py * Increased update worker stack size * Text fixes in backup CLI * Displaying number of update stages to run; removed timeout in handling errors * Bumping version * Added thread cleanup for spawner thread * Updated build targets to exclude firmware bundle from 'ALL' * Fixed makefile for update_package; skipping VCP init for update mode (ugly) * Switched github build from ALL to update_package * Added +x for dist_update.sh * Cli: add total heap size to "free" command * Moved (RAM) suffix to build version instead of git commit no. * DFU comment * Some fixes suggested by clang-tidy * Fixed recursive PREFIX macro * Makefile: gather all new rules in updater namespace. FuriHal: rename bootloader to boot, isr safe delays * Github: correct build target name in firmware build * FuriHal: move target switch to boot * Makefile: fix firmware flash * Furi, FuriHal: move kernel start to furi, early init * Drop bootloader related stuff * Drop cube. Drop bootloader linker script. * Renamed update_hl, moved constants to #defines * Moved update-related boot mode to separate bitfield * Reworked updater cli to single entry point; fixed crash on tar cleanup * Added Python replacement for dist shell scripts * Linter fixes for dist.py +x * Fixes for environment suffix * Dropped bash scripts * Added dirty build flag to version structure & interfaces * Version string escapes * Fixed flag logic in dist.py; added support for App instances being imported and not terminating the whole program * Fixed fw address in ReadMe.md * Rpc: fix crash on double screen start * Return back original boot behavior and fix jump to system bootloader * Cleanup code, add error sequence for RTC * Update firmware readme * FuriHal: drop boot, restructure RTC registers usage and add header register check * Furi goes first * Toolchain: add ccache support * Renamed update bundle dir Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com> Co-authored-by: あく <alleteam@gmail.com>
2022-04-13 20:50:25 +00:00
void furi_hal_resources_deinit_early(void);
[FL-2263] Flasher service & RAM exec (#1006) * WIP on stripping fw * Compact FW build - use RAM_EXEC=1 COMPACT=1 DEBUG=0 * Fixed uninitialized storage struct; small fixes to compact fw * Flasher srv w/mocked flash ops * Fixed typos & accomodated FFF changes * Alternative fw startup branch * Working load & jmp to RAM fw * +manifest processing for stage loader; + crc verification for stage payload * Fixed questionable code & potential leaks * Lowered screen update rate; added radio stack update stubs; working dfu write * Console EP with manifest & stage validation * Added microtar lib; minor ui fixes for updater * Removed microtar * Removed mtar #2 * Added a better version of microtar * TAR archive api; LFS backup & restore core * Recursive backup/restore * LFS worker thread * Added system apps to loader - not visible in UI; full update process with restarts * Typo fix * Dropped BL & f6; tooling for updater WIP * Minor py fixes * Minor fixes to make it build after merge * Ported flash workaround from BL + fixed visuals * Minor cleanup * Chmod + loader app search fix * Python linter fix * Removed usb stuff & float read support for staged loader == -10% of binary size * Added backup/restore & update pb requests * Added stub impl to RPC for backup/restore/update commands * Reworked TAR to use borrowed Storage api; slightly reduced build size by removing `static string`; hidden update-related RPC behind defines * Moved backup&restore to storage * Fixed new message types * Backup/restore/update RPC impl * Moved furi_hal_crc to LL; minor fixes * CRC HAL rework to LL * Purging STM HAL * Brought back minimal DFU boot mode (no gui); additional crc state checks * Added splash screen, BROKEN usb function * Clock init rework WIP * Stripped graphics from DFU mode * Temp fix for unused static fun * WIP update picker - broken! * Fixed UI * Bumping version * Fixed RTC setup * Backup to update folder instead of ext root * Removed unused scenes & more usb remnants from staged loader * CI updates * Fixed update bundle name * Temporary restored USB handler * Attempt to prevent .text corruption * Comments on how I spent this Saturday * Added update file icon * Documentation updates * Moved common code to lib folder * Storage: more unit tests * Storage: blocking dir open, differentiate file and dir when freed. * Major refactoring; added input processing to updater to allow retrying on failures (not very useful prob). Added API for extraction of thread return value * Removed re-init check for manifest * Changed low-level path manipulation to toolbox/path.h; makefile cleanup; tiny fix in lint.py * Increased update worker stack size * Text fixes in backup CLI * Displaying number of update stages to run; removed timeout in handling errors * Bumping version * Added thread cleanup for spawner thread * Updated build targets to exclude firmware bundle from 'ALL' * Fixed makefile for update_package; skipping VCP init for update mode (ugly) * Switched github build from ALL to update_package * Added +x for dist_update.sh * Cli: add total heap size to "free" command * Moved (RAM) suffix to build version instead of git commit no. * DFU comment * Some fixes suggested by clang-tidy * Fixed recursive PREFIX macro * Makefile: gather all new rules in updater namespace. FuriHal: rename bootloader to boot, isr safe delays * Github: correct build target name in firmware build * FuriHal: move target switch to boot * Makefile: fix firmware flash * Furi, FuriHal: move kernel start to furi, early init * Drop bootloader related stuff * Drop cube. Drop bootloader linker script. * Renamed update_hl, moved constants to #defines * Moved update-related boot mode to separate bitfield * Reworked updater cli to single entry point; fixed crash on tar cleanup * Added Python replacement for dist shell scripts * Linter fixes for dist.py +x * Fixes for environment suffix * Dropped bash scripts * Added dirty build flag to version structure & interfaces * Version string escapes * Fixed flag logic in dist.py; added support for App instances being imported and not terminating the whole program * Fixed fw address in ReadMe.md * Rpc: fix crash on double screen start * Return back original boot behavior and fix jump to system bootloader * Cleanup code, add error sequence for RTC * Update firmware readme * FuriHal: drop boot, restructure RTC registers usage and add header register check * Furi goes first * Toolchain: add ccache support * Renamed update bundle dir Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com> Co-authored-by: あく <alleteam@gmail.com>
2022-04-13 20:50:25 +00:00
void furi_hal_resources_init(void);
/** Get a corresponding external connector pin number for a gpio
*
* @param gpio GpioPin
*
* @return pin number or -1 if gpio is not on the external connector
*/
int32_t furi_hal_resources_get_ext_pin_number(const GpioPin* gpio);
#ifdef __cplusplus
}
#endif