u-boot/arch/arm/include/asm/arch-ls102xa/config.h
Tom Rini 308520b8f2 global: Remove unused CONFIG symbols
This removes the following unreferenced CONFIG symbols:
   CONFIG_FDTADDR
   CONFIG_FDTFILE
   CONFIG_FLASH_SECTOR_SIZE
   CONFIG_FSL_CPLD
   CONFIG_HDMI_ENCODER_I2C_ADDR
   CONFIG_I2C_MVTWSI
   CONFIG_I2C_RTC_ADDR
   CONFIG_IRAM_END
   CONFIG_IRAM_SIZE
   CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
   CONFIG_L1_INIT_RAM
   CONFIG_MACB_SEARCH_PHY
   CONFIG_MIU_2BIT_21_7_INTERLEAVED
   CONFIG_MTD_NAND_VERIFY_WRITE
   CONFIG_MVGBE_PORTS
   CONFIG_NETDEV
   CONFIG_NUM_DSP_CPUS
   CONFIG_PHY_BASE_ADR
   CONFIG_PHY_INTERFACE_MODE
   CONFIG_PSRAM_SCFG
   CONFIG_RAMBOOT_SPIFLASH
   CONFIG_RAMBOOT_TEXT_BASE
   CONFIG_RD_LVL
   CONFIG_ROCKCHIP_SDHCI_MAX_FREQ
   CONFIG_SETUP_INITRD_TAG
   CONFIG_SH_QSPI_BASE
   CONFIG_SMDK5420
   CONFIG_SOCRATES
   CONFIG_SPI_ADDR
   CONFIG_SPI_FLASH_QUAD
   CONFIG_SPI_FLASH_SIZE
   CONFIG_SPI_HALF_DUPLEX
   CONFIG_SPI_N25Q256A_RESET
   CONFIG_TEGRA_SLINK_CTRLS
   CONFIG_TPM_TIS_BASE_ADDRESS
   CONFIG_UBOOT_SECTOR_COUNT
   CONFIG_UBOOT_SECTOR_START
   CONFIG_VAR_SIZE_SPL
   CONFIG_VERY_BIG_RAM

And also:
   BL1_SIZE
   PHY_NO
   RESERVE_BLOCK_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00

87 lines
3.1 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2014, Freescale Semiconductor
*/
#ifndef _ASM_ARMV7_LS102XA_CONFIG_
#define _ASM_ARMV7_LS102XA_CONFIG_
#define OCRAM_BASE_ADDR 0x10000000
#define OCRAM_SIZE 0x00010000
#define OCRAM_BASE_S_ADDR 0x10010000
#define OCRAM_S_SIZE 0x00010000
#define CFG_SYS_DCSRBAR 0x20000000
#define CFG_SYS_DCSR_DCFG_ADDR (CFG_SYS_DCSRBAR + 0x00220000)
#define SYS_FSL_DCSR_RCPM_ADDR (CFG_SYS_DCSRBAR + 0x00222000)
#define SYS_FSL_GIC_ADDR (CONFIG_SYS_IMMR + 0x00400000)
#define CFG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000)
#define CFG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR + 0x00510000)
#define CFG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000)
#define CFG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000)
#define CFG_SYS_FSL_SCFG_ADDR (CONFIG_SYS_IMMR + 0x00570000)
#define CFG_SYS_FSL_SEC_ADDR (CONFIG_SYS_IMMR + 0x700000)
#define CFG_SYS_FSL_JR0_ADDR (CONFIG_SYS_IMMR + 0x710000)
#define CFG_SYS_SEC_MON_ADDR (CONFIG_SYS_IMMR + 0x00e90000)
#define CFG_SYS_SFP_ADDR (CONFIG_SYS_IMMR + 0x00e80200)
#define CFG_SYS_FSL_SERDES_ADDR (CONFIG_SYS_IMMR + 0x00ea0000)
#define CFG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00ee0000)
#define CFG_SYS_FSL_LS1_CLK_ADDR (CONFIG_SYS_IMMR + 0x00ee1000)
#define CFG_SYS_FSL_RCPM_ADDR (CONFIG_SYS_IMMR + 0x00ee2000)
#define CFG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500)
#define CFG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011d0500)
#define CFG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x02100000)
#define CFG_SYS_FSL_SEC_OFFSET 0x00700000
#define CFG_SYS_FSL_JR0_OFFSET 0x00710000
#define SCTR_BASE_ADDR (CONFIG_SYS_IMMR + 0x01b00000)
#define I2C1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01180000)
#define I2C2_BASE_ADDR (CONFIG_SYS_IMMR + 0x01190000)
#define I2C3_BASE_ADDR (CONFIG_SYS_IMMR + 0x011a0000)
#define WDOG1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01ad0000)
#define QSPI0_BASE_ADDR (CONFIG_SYS_IMMR + 0x00550000)
#define DSPI1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01100000)
#define LPUART_BASE (CONFIG_SYS_IMMR + 0x01950000)
#define CFG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000)
#define CFG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000)
#define CFG_SYS_PCIE1_PHYS_BASE 0x4000000000ULL
#define CFG_SYS_PCIE2_PHYS_BASE 0x4800000000ULL
#define CFG_SYS_PCIE1_VIRT_ADDR 0x24000000UL
#define CFG_SYS_PCIE2_VIRT_ADDR 0x34000000UL
#define CFG_SYS_PCIE_MMAP_SIZE (192 * 1024 * 1024) /* 192M */
/*
* TLB will map VIRT_ADDR to (PHYS_BASE + VIRT_ADDR)
* So 40bit PCIe PHY addr can directly be converted to a 32bit virtual addr.
*/
#define CFG_SYS_PCIE1_PHYS_ADDR (CFG_SYS_PCIE1_PHYS_BASE + \
CFG_SYS_PCIE1_VIRT_ADDR)
#define CFG_SYS_PCIE2_PHYS_ADDR (CFG_SYS_PCIE2_PHYS_BASE + \
CFG_SYS_PCIE2_VIRT_ADDR)
/* SATA */
#define AHCI_BASE_ADDR (CONFIG_SYS_IMMR + 0x02200000)
#ifdef CONFIG_DDR_SPD
#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
#endif
#define DCU_LAYER_MAX_NUM 16
#ifdef CONFIG_ARCH_LS1021A
#else
#error SoC not defined
#endif
#define FSL_IFC_COMPAT "fsl,ifc"
#define FSL_QSPI_COMPAT "fsl,ls1021a-qspi"
#define FSL_DSPI_COMPAT "fsl,ls1021a-v1.0-dspi"
#endif /* _ASM_ARMV7_LS102XA_CONFIG_ */