u-boot/arch/arm
Lokesh Vutla b9f035e9c8 arm: dts: k3-j721e-mcu: Add MCU domain R5F cluster node
The J721E SoCs have 3 dual-core Arm Cortex-R5F processor (R5FSS)
subsystems/clusters. One R5F cluster (MCU_R5FSS0) is present within
the MCU domain, and the remaining two clusters are present in the
MAIN domain (MAIN_R5FSS0 & MAIN_R5FSS1). Each of these can be
configured at boot time to be either run in a LockStep mode or in
an Asymmetric Multi Processing (AMP) fashion in Split-mode. These
subsystems have 64 KB each Tightly-Coupled Memory (TCM) internal
memories for each core split between two banks - ATCM and BTCM
(further interleaved into two banks). There are some IP integration
differences from standard Arm R5 clusters such as the absence of
an ACP port, presence of an additional TI-specific Region Address
Translater (RAT) module for translating 32-bit CPU addresses into
larger system bus addresses etc.

Add the DT node for the MCU domain R5F cluster/subsystem, the two
R5 cores are added as child nodes to the main cluster/subsystem node.
The cluster is configured to run in LockStep mode by default, with the
ATCMs enabled to allow the R5 cores to execute code from DDR with
boot-strapping code from ATCM. The inter-processor communication
between the main A72 cores and these processors is achieved through
shared memory and Mailboxes.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:34 -04:00
..
cpu u-boot-imx-20191009 2019-10-09 11:44:45 -04:00
dts arm: dts: k3-j721e-mcu: Add MCU domain R5F cluster node 2019-10-11 10:07:34 -04:00
include imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB 2019-10-08 16:36:37 +02:00
lib board_f: fix noncached reservation calculation 2019-08-30 14:17:11 -04:00
mach-aspeed
mach-at91 ARM: at91: Add SFR definitions 2019-10-08 09:16:11 +03:00
mach-bcm283x ARM: bcm283x: Include definition for additional emmc clock 2019-09-06 18:16:59 +02:00
mach-bcmstb board: arm: Add support for Broadcom BCM7260 2018-09-10 21:19:31 -04:00
mach-davinci ARM: omapl138_lcdk: Enable DM_GPIO and DM and GPIO Commands 2019-09-13 11:56:08 -04:00
mach-exynos CONFIG_SPL_SYS_[DI]CACHE_OFF: add 2019-05-18 08:15:35 -04:00
mach-highbank
mach-imx Revert "spl: imx6: Let spl_boot_device return USDHC1 or USDHC2" 2019-10-08 16:36:37 +02:00
mach-integrator
mach-k3 arm: K3: sysfw-loader: Allow loading SYSFW via Y-Modem 2019-10-11 10:07:33 -04:00
mach-keystone arm: mach-keystone: Use appended original image size in image processing 2019-07-29 17:58:52 -04:00
mach-kirkwood env: Move env_get() to env.h 2019-08-11 16:43:41 -04:00
mach-mediatek board: mediatek: Add pumpkin board support 2019-07-29 09:32:11 -04:00
mach-meson - amlogic: add support for the SEI Robotic SEI510 2019-08-12 23:03:35 -04:00
mach-mvebu arm: mvebu: set 38x and 39x AVS on lower frequency 2019-07-11 10:58:03 +02:00
mach-omap2 spl: Allow tiny printf() to be controlled in SPL and TPL 2019-10-08 13:57:45 +08:00
mach-orion5x arm: remove prototype for get_timer_masked 2018-10-10 13:35:09 -04:00
mach-owl
mach-qemu Kconfig: Sort bool, default, select and imply options 2018-07-30 07:18:48 -04:00
mach-rmobile spl: Allow tiny printf() to be controlled in SPL and TPL 2019-10-08 13:57:45 +08:00
mach-rockchip spl: pass args to board_return_to_bootrom 2019-10-08 16:35:16 +02:00
mach-s5pc1xx CONFIG_SPL_SYS_[DI]CACHE_OFF: add 2019-05-18 08:15:35 -04:00
mach-snapdragon arm: mach-snapdragon: pinctrl: clarify gpio disable bit 2019-01-25 12:12:56 -05:00
mach-socfpga spl: Convert CONFIG_SPL_SIZE_LIMIT to hex 2019-10-08 13:57:45 +08:00
mach-sti
mach-stm32 mach-stm32: Fix MPU region size dedicated to SDRAM for STM32F4 2019-06-28 09:45:27 +02:00
mach-stm32mp bsec: update after MISC u-class update 2019-08-27 11:19:23 +02:00
mach-sunxi sunxi: H6: Enable USB for existing boards 2019-07-16 17:13:15 +05:30
mach-tegra Revert "ARM: tegra: reserve unmapped RAM so EFI doesn't use it" 2019-10-06 16:02:37 +02:00
mach-uniphier dm: core: Add device_foreach_child() 2019-10-08 13:57:39 +08:00
mach-versal arm64: versal: Move common board dtb search 2019-10-08 13:14:54 +02:00
mach-versatile
mach-zynq CONFIG_SPL_SYS_[DI]CACHE_OFF: add 2019-05-18 08:15:35 -04:00
mach-zynqmp arm64: zynqmp: Use mailbox driver for PMUFW config loading 2019-10-08 09:55:11 +02:00
mach-zynqmp-r5
thumb1/include/asm/proc-armv
config.mk efi_loader: Rename sections to allow for implicit data 2018-07-25 14:57:44 +02:00
Kconfig Xilinx/FPGA changes for v2020.01 2019-10-09 16:22:03 -04:00
Kconfig.debug
Makefile arm: imx: build mach-imx for i.MX8 2019-01-28 20:35:47 +01:00