Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-12 06:12:58 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/configs
History
Cyril Chemparathy b87996d24a ARM1176: Coexist with other ARM1176 platforms 
The current ARM1176 CPU specific code is too specific to the SMDK6400
architecture.  The following changes were necessary prerequisites for the
addition of other SoCs based on ARM1176.

Existing board's (SMDK6400) configuration has been modified to keep behavior
unchanged despite these changes.

1. Peripheral port remap configurability
The earlier code had hardcoded remap values specific to s3c64xx in start.S.
This change makes the peripheral port remap addresses and sizes configurable.

2. U-Boot code relocation support
Most architectures allow u-boot code to run initially at a different
address (possibly in NOR) and then get relocated to its final resting place
in RAM.  Added support for this capability in ARM1176 architecture.

3. Disable TCM if necessary
If a ROM based bootloader happened to have initialized TCM, we disable it here
to keep things sane.

4. Remove unnecessary SoC specific includes
ARM1176 code does not really need this SoC specific include.  The presence
of this include prevents builds on other ARM1176 archs.

5. Modified virt-to-phys conversion during MMU disable
The original MMU disable code masks out too many bits from the load address
when it tries to figure out the physical address of the jump target label.
Consequently, it ends up branching to the wrong address after disabling the
MMU.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07 14:13:27 -04:00
..
manroland configs: remove unused CONFIG_COMMAND_HISTORY 2010-05-04 23:38:50 +02:00
a320evb.h arm: A320: Add support for Faraday A320 evaluation board 2009-11-27 16:26:17 -06:00
A3000.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
acadia.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
actux1.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
actux2.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
actux3.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
actux4.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
ADCIOP.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
Adder.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
AdderUSB.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ADS860.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
aev.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
afeb9260.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
Alaska8220.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
alpr.h ppc4xx: alpr: Remove some not needed commands to make image fit again 2010-04-14 10:26:28 +02:00
amcc-common.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
AmigaOneG3SE.h stdio/device: rework function naming convention 2009-07-18 00:27:46 +02:00
AMX860.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ap325rxa.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
AP1000.h configs: remove unused CONFIG_COMMAND_HISTORY 2010-05-04 23:38:50 +02:00
APC405.h ppc4xx: Fix APC405 build breakage 2010-04-29 10:16:30 +02:00
apollon.h Remove superfluous uses of V_PROMPT macro. 2010-01-04 08:48:16 -06:00
AR405.h ppc4xx: Remove unused feature from AR405 board 2010-02-03 09:17:56 +01:00
aria.h mpc5121: determine RAM size using get_ram_size() 2010-04-24 22:56:35 +02:00
armadillo.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
ASH405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
assabet.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
astro_mcf5373l.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
at91cap9adk.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
at91rm9200dk.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
at91rm9200ek.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
at91sam9m10g45ek.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
at91sam9rlek.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
at91sam9260ek.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
at91sam9261ek.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
at91sam9263ek.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
atc.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
atngw100.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
atstk1002.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
atstk1003.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
atstk1004.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
atstk1006.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
ATUM8548.h ppc/85xx: Clean up ATUM8548 PCI setup code 2010-01-05 13:49:06 -06:00
B2.h Move lib_$ARCH directories to arch/$ARCH/lib 2010-04-13 09:13:03 +02:00
BAB7xx.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
bamboo.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
barco.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
BC3450.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
bf518f-ezbrd.h Blackfin: bf518f-ezbrd: increase monitor length 2010-01-17 09:17:27 -05:00
bf526-ezbrd.h Blackfin: tweak embedded LDR env config option 2010-01-17 09:17:26 -05:00
bf527-ezkit.h Blackfin: add support for BF527-EZKIT v2.1 2010-01-17 09:17:27 -05:00
bf533-ezkit.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
bf533-stamp.h blackfin: Move cpu/blackfin/* to arch/blackfin/cpu/* 2010-04-13 09:13:25 +02:00
bf537-minotaur.h Blackfin: tweak embedded LDR env config option 2010-01-17 09:17:26 -05:00
bf537-pnav.h blackfin: Move cpu/blackfin/* to arch/blackfin/cpu/* 2010-04-13 09:13:25 +02:00
bf537-srv1.h Blackfin: tweak embedded LDR env config option 2010-01-17 09:17:26 -05:00
bf537-stamp.h blackfin: Move cpu/blackfin/* to arch/blackfin/cpu/* 2010-04-13 09:13:25 +02:00
bf538f-ezkit.h blackfin: Move cpu/blackfin/* to arch/blackfin/cpu/* 2010-04-13 09:13:25 +02:00
bf548-ezkit.h Blackfin: convert bfin_sdh to generic mmc 2010-01-17 09:17:27 -05:00
bf561-acvilon.h Blackfin: bf561-acvilon: new board port 2010-01-17 09:17:26 -05:00
bf561-ezkit.h blackfin: Move cpu/blackfin/* to arch/blackfin/cpu/* 2010-04-13 09:13:25 +02:00
bfin_adi_common.h Blackfin: add support for kgdb 2010-01-17 20:36:09 -05:00
blackstamp.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
BMW.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
bubinga.h i2c: Update references to individual i2c commands 2009-06-12 20:39:46 +02:00
c2mon.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
CANBT.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
canmb.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
canyonlands.h ppc4xx: Canyonlands: Change EBC bus config to drive always (no high-z) 2009-11-09 13:30:19 +01:00
CATcenter.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
CCM.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
cerf250.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
cm-bf527.h Blackfin: update tiny board settings (voltage/default env) 2010-01-17 09:17:26 -05:00
cm-bf533.h Blackfin: update tiny board settings (voltage/default env) 2010-01-17 09:17:26 -05:00
cm-bf537e.h blackfin: Move cpu/blackfin/* to arch/blackfin/cpu/* 2010-04-13 09:13:25 +02:00
cm-bf537u.h blackfin: Move cpu/blackfin/* to arch/blackfin/cpu/* 2010-04-13 09:13:25 +02:00
cm-bf548.h Blackfin: update tiny board settings (voltage/default env) 2010-01-17 09:17:26 -05:00
cm-bf561.h Blackfin: cm-bf561: update network/env settings 2010-04-07 01:10:34 -04:00
cm41xx.h ks8695: move serial driver to drivers/serial 2009-03-29 23:01:42 +02:00
cm4008.h ks8695: move serial driver to drivers/serial 2009-03-29 23:01:42 +02:00
cm5200.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
cmc_pu2.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
cmi_mpc5xx.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
CMS700.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
cobra5272.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
cogent_common.h * Patch by Shlomo Kut, 29 Mar 2004: 2004-09-29 11:02:56 +00:00
cogent_mpc8xx.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
cogent_mpc8260.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
CPC45.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
CPCI2DP.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
CPCI405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
CPCI405AB.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
CPCI405DT.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
CPCI750.h 74xx_7xx: CPCI750: Add ECC support on esd CPCI-CPU/750 board 2010-05-06 00:22:53 +02:00
CPCI4052.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
cpci5200.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
CPCIISER4.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
CPU86.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
CPU87.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
cpu9260.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
cpuat91.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
cradle.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
CRAYL1.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
csb226.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
csb272.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
csb472.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
csb637.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
CU824.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
da830evm.h da830evm: Add support for TI EMAC 2010-03-07 12:36:35 -06:00
DASA_SIM.h ppc4xx: Update TEXT_BASE for DASA_SIM boards 2009-03-20 22:39:13 +01:00
davinci_dm355evm.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_dm355leopard.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_dm365evm.h musb: Add host support for DM365 EVM 2010-02-03 22:06:59 +01:00
davinci_dm6467evm.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_dvevm.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_schmoogie.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_sffsdr.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_sonata.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
DB64360.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
DB64460.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
dbau1x00.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
debris.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
delta.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
devkit8000.h OMAP3 Move declaration of gpmc_cfg. 2010-02-12 12:31:53 -06:00
digsy_mtc.h digsy_mtc: Add TCR register value for RTC (DS1339) 2009-09-24 00:21:06 +02:00
dlvision.h ppc4xx: Add DL-Vision 405EP board support 2009-07-24 06:42:31 +02:00
dnp1110.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
DP405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
DU405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
DU440.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
EB+MCF-EV123.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
eb_cpux9k2.h new board (eb_cpux9k2) 2010-02-12 12:36:04 -06:00
ebony.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
edb93xx.h Add support for EDB93xx boards 2010-02-12 12:31:54 -06:00
ELPPC.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
ELPT860.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
eNET.h eNET: Implement eNET Watchdog 2010-05-06 00:20:04 +02:00
EP1C20.h nios2: Set CONFIG_SYS_HZ to 1000 all nios2 boards. 2010-04-02 12:28:41 -04:00
EP1S10.h nios2: Set CONFIG_SYS_HZ to 1000 all nios2 boards. 2010-04-02 12:28:41 -04:00
EP1S40.h nios2: Set CONFIG_SYS_HZ to 1000 all nios2 boards. 2010-04-02 12:28:41 -04:00
ep82xxm.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
EP88x.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ep7312.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
ep8248.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
ep8260.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
ERIC.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
espt.h sh: Add support ESPT-GIGA borad 2009-07-11 09:02:21 +09:00
ESTEEM192E.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ETX094.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
evb4510.h arm: clean cache management 2009-04-05 13:06:31 +02:00
EVB64260.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
eXalion.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
EXBITGEN.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
FADS823.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
FADS850SAR.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
FADS860T.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
favr-32-ezkit.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
FLAGADM.h 8xx, icache: enabling ICache not before running from RAM 2009-03-18 20:48:29 +01:00
FPS850L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
FPS860L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
fx12mm.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
G2000.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
galaxy5200.h Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
gcplus.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
gdppc440etx.h ppc4xx: Add GDsys PowerPC 440 ETX board support. 2009-01-26 10:13:30 +01:00
GEN860T.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
GENIETV.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
gr_cpci_ax2000.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
gr_ep2s60.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
gr_xc3s_1500.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
grsim.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
grsim_leon2.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
GTH.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
gth2.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
guruplug.h Marvell GuruPlug Board Support 2010-04-30 05:23:24 -05:00
gw8260.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
h2_p2_dbg_board.h * Code cleanup (ARM mostly) 2004-07-01 16:30:44 +00:00
hammerhead.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
hcu4.h ppc4xx: Update configs for Netstal boards 2008-10-21 17:34:57 +02:00
hcu5.h ppc4xx: Update configs for Netstal boards 2008-10-21 17:34:57 +02:00
hermes.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
HH405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
HIDDEN_DRAGON.h remove _IO_BASE and KSEG1ADDR from board configuration files 2009-07-11 00:19:16 +02:00
HMI10.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
hmi1001.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
HUB405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
hymod.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
IAD210.h boards: move board_get_enetaddr() into board-specific init 2009-03-20 22:39:12 +01:00
ibf-dsp561.h blackfin: Move cpu/blackfin/* to arch/blackfin/cpu/* 2010-04-13 09:13:25 +02:00
IceCube.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
icon.h ppc4xx: Add support for ICON board (PPC440SPe) 2010-04-29 10:16:20 +02:00
ICU862.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
idmr.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
IDS8247.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
impa7.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
imx27lite-common.h arm, i.mx27: add support for magnesium board from projectiondesign 2010-04-30 05:23:23 -05:00
imx27lite.h arm, i.mx27: add support for magnesium board from projectiondesign 2010-04-30 05:23:23 -05:00
imx31_litekit.h MX: RTC13783 uses general function to access PMIC 2010-05-05 09:48:41 +02:00
imx31_phycore.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
incaip.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
inka4x0.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
innokom.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
integratorap.h integratorap/cp: use cfi driver 2009-06-23 00:10:04 +02:00
integratorcp.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
intip.h ppc4xx: Make DDR2 timing for intip more robust 2009-09-23 15:46:02 +02:00
ip04.h Blackfin: IP04: new board port 2010-04-07 01:11:17 -04:00
IP860.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
ipek01.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
IPHASE4539.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ISPAN.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
IVML24.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
IVMS8.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
ixdp425.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
ixdpg425.h arm: timer and interrupt init rework 2009-06-12 20:39:48 +02:00
JSE.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
jupiter.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
KAREF.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
katmai.h ppc4xx: Add option for PPC440SPe ports without old Rev. A support 2010-04-14 10:27:39 +02:00
kb9202.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
keymile-common.h configs: remove unused CONFIG_COMMAND_HISTORY 2010-05-04 23:38:50 +02:00
kilauea.h Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
km8xx.h powerpc: updates for the keymile boards 2009-07-21 00:06:11 +02:00
km_arm.h arm: add support for the suen3 board from keymile 2010-03-07 12:36:36 -06:00
kmeter1.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
kmsupx4.h 8xx: add support for new keymile kmsupx4 board. 2009-03-18 20:50:05 +01:00
korat.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
KUP4K.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
KUP4X.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
kvme080.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
LANTEC.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
lart.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
linkstation.h Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
logodl.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
lpc2292sodimm.h arm: cleanup remaining CONFIG_INIT_CRITICAL 2009-06-12 20:39:48 +02:00
lpd7a400-10.h Fix SMC91111 regression: lpd7a40x build failures 2009-11-09 21:56:18 -08:00
lpd7a400.h lh7a40x: move serial driver to drivers/serial 2009-06-12 20:39:53 +02:00
lpd7a404-10.h Fix SMC91111 regression: lpd7a40x build failures 2009-11-09 21:56:18 -08:00
lpd7a404.h Fix SMC91111 regression: lpd7a40x build failures 2009-11-09 21:56:18 -08:00
luan.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
lubbock.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
lwmon.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
lwmon5.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
m501sk.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
M5208EVBE.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5235EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5249EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5253DEMO.h ColdFire: Fix incorrect M5253DEMO default environment 2010-03-24 11:09:39 -05:00
M5253EVBE.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5271EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5272C3.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5275EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5282EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5329EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5373EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5475EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5485EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M52277EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M53017EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M54451EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M54455EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
magnesium.h arm, i.mx27: add support for magnesium board from projectiondesign 2010-04-30 05:23:23 -05:00
makalu.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MBX.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MBX860T.h ppc: cleanup compiler errors/warnings 2009-03-27 20:23:32 +01:00
mcc200.h mcc200: fix build error 2009-10-19 09:18:57 +02:00
mcu25.h ppc4xx: Update configs for Netstal boards 2008-10-21 17:34:57 +02:00
mecp5123.h mpc5121: determine RAM size using get_ram_size() 2010-04-24 22:56:35 +02:00
mecp5200.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
meesc.h at91: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT 2010-04-03 15:24:27 -05:00
METROBOX.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
mgcoge.h FDT: remove obsolete OF_CPU and OF_SOC macros. 2009-09-22 22:59:27 +02:00
mgsuvd.h 8xx, mgsuvd: rename board to a more generic name 2009-03-18 20:50:04 +01:00
MHPC.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
microblaze-generic.h microblaze: Stop stack clobbering in microblaze-generic. 2009-12-08 08:51:42 +01:00
MigoR.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
mimc200.h MIMC200: set default fbmem value 2009-11-22 22:07:17 +01:00
MIP405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
ML2.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
ml507.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
modnet50.h netarm: move serial driver to drivers/serial 2009-03-29 23:01:41 +02:00
motionpro.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
MOUSSE.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mp2usb.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
MPC86xADS.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MPC832XEMDS.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
MPC837XEMDS.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
MPC837XERDB.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
MPC885ADS.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mpc5121-common.h mpc5121: add support for PDM360NG board 2010-04-24 22:56:37 +02:00
mpc5121ads.h mpc5121: determine RAM size using get_ram_size() 2010-04-24 22:56:35 +02:00
mpc7448hpc2.h FDT: remove obsolete OF_CPU and OF_SOC macros. 2009-09-22 22:59:27 +02:00
MPC8260ADS.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
MPC8266ADS.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
MPC8313ERDB.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
MPC8315ERDB.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
MPC8323ERDB.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
MPC8349EMDS.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
MPC8349ITX.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
MPC8360EMDS.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
MPC8360ERDK.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
MPC8536DS.h ppc/85xx: Use CONFIG_NS16550_MIN_FUNCTIONS to reduce NAND_SPL size 2010-04-07 01:34:39 -05:00
MPC8540ADS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8540EVAL.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
MPC8541CDS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8544DS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8548CDS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8555CDS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8560ADS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8568MDS.h 83xx, uec: split enet_interface in two variables 2010-01-31 22:37:12 -08:00
MPC8569MDS.h ppc/85xx: Use CONFIG_NS16550_MIN_FUNCTIONS to reduce NAND_SPL size 2010-04-07 01:34:39 -05:00
MPC8572DS.h ppc/85xx: Remove CONFIG_SYS_DDR_TLB_START 2010-01-05 13:49:08 -06:00
MPC8610HPCD.h fsl: improve the PIXIS code and fix a few bugs 2010-04-07 00:21:27 -05:00
MPC8641HPCN.h mpc86xx: set the DDR BATs after calculating true DDR size 2010-03-30 10:50:22 -05:00
mpr2.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
ms7720se.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
ms7722se.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
ms7750se.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
muas3001.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
mucmc52.h mpc5200, mucmc52, uc101: config cleanup 2009-09-25 01:19:17 +02:00
munices.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
MUSENKI.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mv88f6281gtw_ge.h Marvell MV88F6281GTW_GE Board support 2009-07-18 20:41:42 +02:00
MVBC_P.h Remove deprecated 'autoscr' command/variables 2009-09-22 23:03:24 +02:00
MVBLM7.h mpc83xx/mvBLM7: add usb commands and cleanup. 2010-05-07 12:20:15 -05:00
MVBLUE.h MVBLUE: Remove CONFIG_CMD_IRQ 2009-12-14 21:31:17 +01:00
MVS1.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
MVSMR.h Add initial support for Matrix Vision mvSMR board based on MPC5200B. 2010-04-10 00:06:05 +02:00
mx1ads.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
mx1fs2.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
mx31ads.h MX: RTC13783 uses general function to access PMIC 2010-05-05 09:48:41 +02:00
mx31pdk.h MX: RTC13783 uses general function to access PMIC 2010-05-05 09:48:41 +02:00
mx51evk.h Add SPI support to mx51evk board 2010-05-05 09:48:41 +02:00
NC650.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
neo.h ppc4xx: Add GDSys neo 405EP board support 2008-10-21 17:35:02 +02:00
NETPHONE.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
netstal-common.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
netstar.h netstar.h: do not exceed 80 columns 2010-03-07 12:36:35 -06:00
NETTA.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
NETTA2.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
NETVIA.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
nhk8815.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
nios2-generic.h nios2: add gpio support to nios2-generic board 2010-05-28 10:56:03 -04:00
ns9750dev.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
NSCU.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
NX823.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
o2dnt.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
ocotea.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
OCRTC.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
omap3_beagle.h OMAP3 Move declaration of gpmc_cfg. 2010-02-12 12:31:53 -06:00
omap3_evm.h OMAP3 Move declaration of gpmc_cfg. 2010-02-12 12:31:53 -06:00
omap3_overo.h OMAP3 Move declaration of gpmc_cfg. 2010-02-12 12:31:53 -06:00
omap3_pandora.h OMAP3 Move declaration of gpmc_cfg. 2010-02-12 12:31:53 -06:00
omap3_sdp3430.h OMAP3 Move declaration of gpmc_cfg. 2010-02-12 12:31:53 -06:00
omap3_zoom1.h OMAP3 Move declaration of gpmc_cfg. 2010-02-12 12:31:53 -06:00
omap3_zoom2.h OMAP3 Move declaration of gpmc_cfg. 2010-02-12 12:31:53 -06:00
omap730.h ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h 2008-09-12 02:20:40 +02:00
omap730p2.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
omap1510.h ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h 2008-09-12 02:20:40 +02:00
omap1510inn.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
omap1610h2.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
omap1610inn.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
omap2420h4.h Remove superfluous uses of V_PROMPT macro. 2010-01-04 08:48:16 -06:00
omap5912osk.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
openrd_base.h configs/openrd_base.h: reordered macros 2010-04-30 05:23:24 -05:00
ORSG.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
otc570.h at91: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT 2010-04-03 15:24:27 -05:00
OXC.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
P1_P2_RDB.h ppc/85xx: Use CONFIG_NS16550_MIN_FUNCTIONS to reduce NAND_SPL size 2010-04-07 01:34:39 -05:00
P3G4.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
p3mx.h p3mx: Remove serial relocation fixups 2009-10-03 10:17:57 +02:00
p3p440.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
P2020DS.h p2020ds: add alternate boot bank support using the ngPIXIS FPGA 2010-04-07 00:21:28 -05:00
PATI.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
pb1x00.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
PCI405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
PCI5441.h nios2: Set CONFIG_SYS_HZ to 1000 all nios2 boards. 2010-04-02 12:28:41 -04:00
PCIPPC2.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
PCIPPC6.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
pcm030.h board support patch for phyCORE-MPC5200B-tiny 2009-07-10 23:21:32 +02:00
pcs440ep.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
pcu_e.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
pdm360ng.h mpc5121: pdm360ng: add coprocessor POST 2010-04-24 22:56:41 +02:00
pdnb3.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
pf5200.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
PIP405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
PK1C20.h nios2: Set CONFIG_SYS_HZ to 1000 all nios2 boards. 2010-04-02 12:28:41 -04:00
pleb2.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
PLU405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
PM520.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
PM826.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
PM828.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
PM854.h 8xxx: Break out DMA code to a common file 2009-07-01 23:01:51 -05:00
PM856.h 8xxx: Break out DMA code to a common file 2009-07-01 23:01:51 -05:00
pm9261.h pm9261: remove CONFIG_CMD_AUTOSCRIPT 2010-04-30 05:23:22 -05:00
pm9263.h pm9263 converted to at91 soc access 2010-04-30 05:23:26 -05:00
PMC405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
PMC405DE.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
PMC440.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
PN62.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
PPChameleonEVB.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
ppmc7xx.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
ppmc8260.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
purple.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
pxa255_idp.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
qemu-mips.h Refresh LZMA-lib to v4.65 2009-07-22 09:43:27 +02:00
qong.h MX31: Added support for the Casio COM57H5M10XRC to QONG 2010-05-19 09:15:50 +02:00
QS823.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
QS850.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
QS860T.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
quad100hd.h Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
quantum.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
r2dplus.h Merge branch 'master' of /home/wd/git/u-boot/custodians 2009-07-13 23:37:59 +02:00
R360MPI.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
r7780mp.h r7780mp: fix typo in Ethernet chip model number comment. 2009-09-10 23:11:03 +02:00
Rattler.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
RBC823.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
rd6281a.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
redwood.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
rmu.h rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared 2009-06-10 00:15:11 +02:00
RPXClassic.h boards: move board_get_enetaddr() into board-specific init 2009-03-20 22:39:12 +01:00
RPXlite.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
RPXlite_DW.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
RPXsuper.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
RRvision.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
rsdproto.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
rsk7203.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
sacsng.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
Sandpoint8240.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
Sandpoint8245.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
sbc35_a9g20.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
sbc405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
sbc2410x.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
sbc8240.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
sbc8260.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
sbc8349.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
SBC8540.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
sbc8548.h sbc8548: reclaim wasted sector in boot flash 2009-09-30 08:29:47 -05:00
sbc8560.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
sbc8641d.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
sc3.h Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
sc520_cdp.h i386: Fix malloc initialization 2009-12-05 01:02:10 +01:00
sc520_spunk.h i386: Fix malloc initialization 2009-12-05 01:02:10 +01:00
sc520_spunk_rel.h * Code cleanup: 2003-06-27 21:31:46 +00:00
scb9328.h Convert DM9000 driver for CONFIG_NET_MULTI 2009-06-15 00:13:55 -07:00
SCM.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
sequoia.h Adds EHCI definitions to sequoia board configuration file. 2010-01-09 10:27:21 +01:00
sh7763rdp.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
sh7785lcr.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
shannon.h arm: clean cache management 2009-04-05 13:06:31 +02:00
sheevaplug.h configs/sheevaplug: added a few additional commands 2010-04-30 05:23:24 -05:00
SIMPC8313.h Fix SICRL setting in SIMPC8313 2010-05-17 14:44:25 -05:00
SM850.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
smdk2400.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
smdk2410.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
smdk6400.h ARM1176: Coexist with other ARM1176 platforms 2010-06-07 14:13:27 -04:00
smdkc100.h SAMSUNG: SMDKC100: Adds ethernet support. 2010-04-03 15:24:26 -05:00
smmaco4.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
SMN42.h arm: cleanup remaining CONFIG_INIT_CRITICAL 2009-06-12 20:39:48 +02:00
socrates.h 85xx/socrates: Remove NFS support to fit image size. 2010-04-26 22:37:55 -05:00
sorcery.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
spc1920.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
SPD823TS.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
spear-common.h SPEAr : Support added for SPEAr600 board 2010-01-23 08:15:49 -06:00
spear3xx.h mod change 755 => 644 for multiple files 2010-03-21 22:22:53 +01:00
spear6xx.h mod change 755 => 644 for multiple files 2010-03-21 22:22:53 +01:00
spieval.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
stxgp3.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
stxssa.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
stxxtc.h FDT: remove obsolete OF_CPU and OF_SOC macros. 2009-09-22 22:59:27 +02:00
suen3.h arm: add support for the suen3 board from keymile 2010-03-07 12:36:36 -06:00
svm_sc8xx.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
SX1.h arm925t: Fix CONFIG_SYS_HZ to 1000 2009-04-29 21:39:46 +02:00
SXNI855T.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
taihu.h i2c: Update references to individual i2c commands 2009-06-12 20:39:46 +02:00
taishan.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
TASREG.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
tb0229.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
TB5200.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
tcm-bf518.h Blackfin: tcm-bf518: new board port 2010-01-17 09:17:27 -05:00
tcm-bf537.h blackfin: Move cpu/blackfin/* to arch/blackfin/cpu/* 2010-04-13 09:13:25 +02:00
TK885D.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
tny_a9260.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
TOP860.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
TOP5200.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
Total5200.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
TQM85xx.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
TQM823L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM823M.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM834x.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
TQM850L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM850M.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM855L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM855M.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM860L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM860M.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM862L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM862M.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM866M.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM885D.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM5200.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
TQM8260.h TQM8260: fix locations of kernel and ramdisk images in flash 2009-02-17 10:26:38 +01:00
TQM8272.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
trab.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
trizepsiv.h xscale: add support for the polaris board 2009-07-06 21:52:58 +02:00
tx25.h Add support for KARO TX25 board 2010-03-07 12:36:36 -06:00
uc100.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
uc101.h mpc5200, mucmc52, uc101: config cleanup 2009-09-25 01:19:17 +02:00
utx8245.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
v5fx30teval.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
v37.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
v38b.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
VCMA9.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
vct.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
versatile.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
virtlab2.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
vme8349.h mpc83xx: turn on icache in core initialization to improve u-boot boot time 2010-04-22 18:44:56 -05:00
VOH405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
voiceblue.h VoiceBlue: limit line lenght to 80 characters 2010-03-07 12:36:35 -06:00
VOM405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
VoVPN-GW.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
W7OLMC.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
W7OLMG.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
walnut.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
wepep250.h pxa: move serial driver to drivers/serial 2009-06-12 20:39:52 +02:00
WUH405.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
xaeniax.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
xilinx-ppc.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
xilinx-ppc405-generic.h ppc4xx: Generic architecture for xilinx ppc405(v3) 2008-10-24 17:26:09 +02:00
xilinx-ppc405.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
xilinx-ppc440-generic.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
xilinx-ppc440.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
xm250.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
XPEDITE1000.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
XPEDITE5170.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
XPEDITE5200.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
XPEDITE5370.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
xsengine.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
yosemite.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
yucca.h ppc4xx: Add option for PPC440SPe ports without old Rev. A support 2010-04-14 10:27:39 +02:00
Yukon8220.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
zeus.h i2c: Move PPC4xx I2C driver into drivers/i2c directory 2010-04-06 08:10:41 +02:00
ZPC1900.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
ZUMA.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
zylonite.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00