u-boot/arch/arm
Lukasz Majewski 4a9099ef1c arm: dts: Add DTS description for MMC2 am33xx devices
This code has been ported from Linux v5.16.9 arch/arm/boot/dts/am33xx.dtsi
file to allow correct usage of MMC2 controller in U-Boot.

This IP block is a bit specific as it is connected to L3 interconnect bus,
whereas mmc[01] are connected to L4.

Proper configuration of this block (including providing clock) is handled
in ti-sysc.c driver.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2022-03-07 11:36:12 -05:00
..
cpu Convert CONFIG_CHIP_SELECTS_PER_CTRL to Kconfig 2022-03-03 16:51:20 -05:00
dts arm: dts: Add DTS description for MMC2 am33xx devices 2022-03-07 11:36:12 -05:00
include armv8: Fix and simplify branch_if_master/branch_if_slave 2022-03-02 13:59:29 -05:00
lib efi_loader: fix SectionAlignment, FileAlignment 2022-01-15 10:57:22 +01:00
mach-apple arm: apple: Switch to fully dynamic mem layout 2022-02-28 10:33:45 -05:00
mach-aspeed
mach-at91 Convert CONFIG_AT91_EFLASH to Kconfig 2022-01-21 14:01:35 -05:00
mach-bcm283x doc: replace @return by Return: 2022-01-19 18:11:34 +01:00
mach-bcmstb
mach-cortina
mach-davinci Finish conversion of CONFIG_SYS_CLK_FREQ to Kconfig 2021-12-27 16:20:18 -05:00
mach-exynos Convert CONFIG_BOARD_COMMON to Kconfig 2022-03-03 16:51:19 -05:00
mach-highbank
mach-imx imx8m: Drop unused function env_get_offset 2022-02-19 14:46:54 +01:00
mach-integrator
mach-ipq40xx
mach-k3 arm: j721e: Add support for selecting DT based on board name 2022-02-16 14:19:30 -05:00
mach-keystone arch/arm/mach-keystone/ddr3.c: Fix spelling of "resetting". 2022-01-13 07:57:50 -05:00
mach-kirkwood Convert CONFIG_SYS_IDE_MAXBUS et al to Kconfig 2022-02-09 09:16:47 -05:00
mach-lpc32xx
mach-mediatek
mach-meson
mach-mvebu Convert CONFIG_BOARD_ECC_SUPPORT to Kconfig 2022-03-03 16:51:19 -05:00
mach-nexell Convert CONFIG_CONS_INDEX et al to Kconfig 2021-12-27 08:41:38 -05:00
mach-octeontx Convert CONFIG_SYS_PCI_64BIT to Kconfig 2021-12-27 16:20:17 -05:00
mach-octeontx2 Convert CONFIG_SYS_PCI_64BIT to Kconfig 2021-12-27 16:20:17 -05:00
mach-omap2 arm: omap3: Make some memory functions static and clean headers 2022-02-21 08:35:40 -05:00
mach-orion5x Convert CONFIG_88F5182 et al to Kconfig 2021-12-27 16:20:19 -05:00
mach-owl
mach-qemu
mach-rmobile armv8: Fix and simplify branch_if_master/branch_if_slave 2022-03-02 13:59:29 -05:00
mach-rockchip - disable CONFIG_NET_RANDOM_ETHADDR when unnecessary on amlogic based configs 2022-01-09 07:56:31 -05:00
mach-s5pc1xx doc: replace @return by Return: 2022-01-19 18:11:34 +01:00
mach-snapdragon
mach-socfpga armv8: Fix and simplify branch_if_master/branch_if_slave 2022-03-02 13:59:29 -05:00
mach-sti
mach-stm32
mach-stm32mp configs: stm32mp15: Enable OF_BOARD flag 2022-01-24 11:03:21 +01:00
mach-sunxi mach-sunxi: Add support for SUNIV architecture 2022-02-04 00:09:57 +00:00
mach-tegra Merge https://source.denx.de/u-boot/custodians/u-boot-marvell 2022-01-20 12:40:20 -05:00
mach-u8500
mach-uniphier
mach-versal xilinx: Remove GPIO_EXTRA_HEADER selection 2022-02-15 13:06:13 +01:00
mach-versatile
mach-zynq ARM: zynq: Fix debug uart initialization 2022-02-21 13:20:24 +01:00
mach-zynqmp arm64: zynqmp: Fix debug uart initialization 2022-02-21 13:20:29 +01:00
mach-zynqmp-r5 Convert CONFIG_CPU_FREQ_HZ to Kconfig 2021-12-27 16:20:19 -05:00
thumb1/include/asm/proc-armv
config.mk
Kconfig bcm96753ref: add initial support 2022-03-07 11:36:12 -05:00
Kconfig.debug
Makefile