u-boot/include/dt-bindings
Felix Brack fdce9d35dc arm: dts: am33xx: Sync dts with Linux 4.20.0
This patch synchronizes the am33xx SoC specific files with those from
Linux 4.20.0. Hence all board maintainers of am33xx based boards are
on the cc list.
The main purpose of this patch is to prevent further diverging of the
dts files from U-Boot and those from Linux. It aims to set the stage
for the synchronization of board specific dts files. Example: I'm the
maintainer of the PDU001 board: once this patch is applied successfully
I will make changes to the board specific dts file in Linux only and
then post a patch with a copy of this exact dts file to U-Boot. This
will make U-Boot and Linux remain in sync.
The stumbling block of https://patchwork.ozlabs.org/patch/943627 was
removed by the patch https://patchwork.ozlabs.org/patch/962428 from
Lokesh Vutla (many thanks!). This omap-serial driver allows using the
Linux am33xx.dtsi file in U-Boot.
Other changes to dts and dtsi files made by this patch are mainly to
prevent _new_ warnings during the build process. Especially the warning
at pinmux@800 stating 'unnecessary #address-cells/#size-cells without
"ranges" or child "reg"' was not removed. This warning is a good example
showing the benefit of the synchronization: if it needs to be fixed it
will be fixed in Linux and ported back to U-Boot.
Buildman reports all 46 am33xx SoC based boards to build fine, with
warnings of course. Nevertheless this patch should be tested thoroughly
on as many boards as possible to prevent any collateral damage.

Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07 08:13:51 -05:00
..
bus ARM: dts: Resync OMAP3 and omap36xx with Linux 4.18-RC4 2018-07-23 14:33:21 -04:00
clk clk: Add MPC83xx clock driver 2018-09-18 00:01:18 -06:00
clock arm: dts: am33xx: Sync dts with Linux 4.20.0 2018-12-07 08:13:51 -05:00
comphy SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
dma arm: at91: dts: Bring in device tree file for AT91SAM9G45 2016-06-12 23:49:38 +02:00
gpio ARM: dts: Sync Amlogic Meson AXG DT from Linux 4.20-rc1 2018-11-26 14:40:52 +01:00
input include/dt-bindings: Sync some files with the kernel 2016-03-23 22:04:13 +01:00
interrupt-controller STiH410-B2260: Add device tree 2017-03-14 20:40:21 -04:00
interrupt-router SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
leds ARM: kirkwood: Add device-tree for netspace & inetspace 2018-05-29 08:33:03 +02:00
mailbox ARM: tegra: adapt to latest HSP DT binding 2016-08-04 13:36:58 -07:00
media omap3630: Copy Device tree from Linux 4.9.y stable 2017-05-09 20:35:36 -04:00
memory ram: Add driver for MPC83xx 2018-09-18 00:01:18 -06:00
mfd ARM: dts: stm32mp157c-ed1: Add regulator node 2018-05-08 09:07:39 -04:00
mrc SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
net net: phy: ti: Add binding for the CLK_OUT pin muxing 2018-10-10 12:28:54 -05:00
phy dt-bindings: Add include/dt-bindings/phy/phy.h from Linux v4.4 2016-04-04 11:21:59 +02:00
pinctrl dt-bindings: pinctrl: add i.MX8QXP pads definition 2018-10-22 12:59:01 +02:00
pmic SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
power ARM: dts: rmobile: Sync Gen3 DTs with Linux 4.19.6 2018-12-04 09:21:07 +01:00
power-domain SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
pwm am437x: Add am437x_gp_evm_defconfig using CONFIG_DM 2015-10-22 14:44:00 -04:00
regulator dts: Add clock and regulator binding files for max77802 2016-05-25 13:25:18 +09:00
reset ARM: dts: Sync Amlogic Meson AXG DT from Linux 4.20-rc1 2018-11-26 14:40:52 +01:00
soc dt-bindings: soc: add i.MX8QXP pm and rsrc definition 2018-10-22 12:59:01 +02:00
sound ARM: dts: AM43x-EPOS Initial Support 2016-05-27 15:47:46 -04:00
thermal ARM: tegra: pull Tegra124 SoC DT from Linux v4.7 2016-09-27 09:11:02 -07:00
video rockchip: Add a binding file for rk3288 video 2016-03-14 22:03:11 +01:00