u-boot/board/ti
Jon Hunter 5faba1eac6 omap5912-osk: Fix booting from NOR flash
The omap5912-osk board is using a RAM based address as the linker
location for code. This is causing several problems when attempting
to run the latest u-boot code base on this board from flash. Update
the default linker location for code to be in NOR flash at address
0x00000000.

The omap5912-osk board only has 32MB of RAM and so fix the comment
in the omap5912-osk config.mk file as well.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
2013-04-10 16:03:01 -04:00
..
am335x am335x: Update timings for the beaglebone again 2013-04-10 10:04:40 -04:00
am3517crane omap_hsmmc: add driver check for write protection 2013-03-08 16:41:13 -05:00
beagle omap3: allow dynamic selection of gfx_format 2013-03-08 16:41:13 -05:00
dra7xx arm: dra7xx: Add board files for DRA7XX socs 2013-03-11 11:39:30 -04:00
evm omap_hsmmc: add driver check for write protection 2013-03-08 16:41:13 -05:00
omap5_uevm ARM: OMAP5: Rename omap5_evm to omap5_uevm 2013-04-08 11:29:05 -04:00
omap730p2 doc: cleanup - move board READMEs into respective board directories 2012-07-29 15:42:02 +02:00
omap1510inn punt unused clean/distclean targets 2011-10-15 22:20:36 +02:00
omap2420h4 omap2420-h4: Fix booting from NOR flash 2013-04-08 11:29:05 -04:00
omap5912osk omap5912-osk: Fix booting from NOR flash 2013-04-10 16:03:01 -04:00
panda omap_hsmmc: add driver check for write protection 2013-03-08 16:41:13 -05:00
sdp3430 omap_hsmmc: add driver check for write protection 2013-03-08 16:41:13 -05:00
sdp4430 omap_hsmmc: add driver check for write protection 2013-03-08 16:41:13 -05:00
ti814x ti814x_evm: add ti814x evm board support 2013-03-24 12:49:12 -04:00
tnetv107xevm punt unused clean/distclean targets 2011-10-15 22:20:36 +02:00