mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-24 21:54:01 +00:00
doc: cleanup - move board READMEs into respective board directories
Also drop a few files referring to no longer / not yet supported boards. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Jason Jin <jason.jin@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
This commit is contained in:
Wolfgang Denk
parent
631fea8f2d
commit
702e6014f1
83 changed files with 565 additions and 626 deletions
|
|
@ -13,3 +13,170 @@ Derived from au1x00 with a lot of things cut out.
|
|||
Supports emulated flash (patch Jean-Christophe PLAGNIOL-VILLARD) with
|
||||
recent qemu versions. When using emulated flash, launch with
|
||||
-pflash <filename> and erase mips_bios.bin.
|
||||
|
||||
|
||||
|
||||
Notes for the Qemu MIPS port
|
||||
----------------------------
|
||||
|
||||
I) Example usage:
|
||||
|
||||
# ln -s u-boot.bin mips_bios.bin
|
||||
start it:
|
||||
qemu-system-mips -L . /dev/null -nographic
|
||||
|
||||
or
|
||||
|
||||
if you use a qemu version after commit 4224
|
||||
|
||||
create image:
|
||||
# dd of=flash bs=1k count=4k if=/dev/zero
|
||||
# dd of=flash bs=1k conv=notrunc if=u-boot.bin
|
||||
start it:
|
||||
# qemu-system-mips -M mips -pflash flash -monitor null -nographic
|
||||
|
||||
2) Download kernel + initrd
|
||||
|
||||
On ftp://ftp.denx.de/pub/contrib/Jean-Christophe_Plagniol-Villard/qemu_mips/
|
||||
you can downland
|
||||
|
||||
#config to build the kernel
|
||||
qemu_mips_defconfig
|
||||
#patch to fix mips interrupt init on 2.6.24.y kernel
|
||||
qemu_mips_kernel.patch
|
||||
initrd.gz
|
||||
vmlinux
|
||||
vmlinux.bin
|
||||
System.map
|
||||
|
||||
4) Generate uImage
|
||||
|
||||
# tools/mkimage -A mips -O linux -T kernel -C gzip -a 0x80010000 -e 0x80245650 -n "Linux 2.6.24.y" -d vmlinux.bin.gz uImage
|
||||
|
||||
5) Copy uImage to Flash
|
||||
# dd if=uImage bs=1k conv=notrunc seek=224 of=flash
|
||||
|
||||
6) Generate Ide Disk
|
||||
|
||||
# dd of=ide bs=1k cout=100k if=/dev/zero
|
||||
|
||||
# sfdisk -C 261 -d ide
|
||||
# partition table of ide
|
||||
unit: sectors
|
||||
|
||||
ide1 : start= 63, size= 32067, Id=83
|
||||
ide2 : start= 32130, size= 32130, Id=83
|
||||
ide3 : start= 64260, size= 4128705, Id=83
|
||||
ide4 : start= 0, size= 0, Id= 0
|
||||
|
||||
7) Copy to ide
|
||||
|
||||
# dd if=uImage bs=512 conv=notrunc seek=63 of=ide
|
||||
|
||||
8) Generate ext2 on part 2 on Copy uImage and initrd.gz
|
||||
|
||||
# Attached as loop device ide offset = 32130 * 512
|
||||
# losetup -o 16450560 -f ide
|
||||
# Format as ext2 ( arg2 : nb blocks)
|
||||
# mke2fs /dev/loop0 16065
|
||||
# losetup -d /dev/loop0
|
||||
# Mount and copy uImage and initrd.gz to it
|
||||
# mount -o loop,offset=16450560 -t ext2 ide /mnt
|
||||
# mkdir /mnt/boot
|
||||
# cp {initrd.gz,uImage} /mnt/boot/
|
||||
# Umount it
|
||||
# umount /mnt
|
||||
|
||||
9) Set Environment
|
||||
|
||||
setenv rd_start 0x80800000
|
||||
setenv rd_size 2663940
|
||||
setenv kernel BFC38000
|
||||
setenv oad_addr 80500000
|
||||
setenv load_addr2 80F00000
|
||||
setenv kernel_flash BFC38000
|
||||
setenv load_addr_hello 80200000
|
||||
setenv bootargs 'root=/dev/ram0 init=/bin/sh'
|
||||
setenv load_rd_ext2 'ide res; ext2load ide 0:2 ${rd_start} /boot/initrd.gz'
|
||||
setenv load_rd_tftp 'tftp ${rd_start} /initrd.gz'
|
||||
setenv load_kernel_hda 'ide res; diskboot ${load_addr} 0:2'
|
||||
setenv load_kernel_ext2 'ide res; ext2load ide 0:2 ${load_addr} /boot/uImage'
|
||||
setenv load_kernel_tftp 'tftp ${load_addr} /qemu_mips/uImage'
|
||||
setenv boot_ext2_ext2 'run load_rd_ext2; run load_kernel_ext2; run addmisc; bootm ${load_addr}'
|
||||
setenv boot_ext2_flash 'run load_rd_ext2; run addmisc; bootm ${kernel_flash}'
|
||||
setenv boot_ext2_hda 'run load_rd_ext2; run load_kernel_hda; run addmisc; bootm ${load_addr}'
|
||||
setenv boot_ext2_tftp 'run load_rd_ext2; run load_kernel_tftp; run addmisc; bootm ${load_addr}'
|
||||
setenv boot_tftp_hda 'run load_rd_tftp; run load_kernel_hda; run addmisc; bootm ${load_addr}'
|
||||
setenv boot_tftp_ext2 'run load_rd_tftp; run load_kernel_ext2; run addmisc; bootm ${load_addr}'
|
||||
setenv boot_tftp_flash 'run load_rd_tftp; run addmisc; bootm ${kernel_flash}'
|
||||
setenv boot_tftp_tftp 'run load_rd_tftp; run load_kernel_tftp; run addmisc; bootm ${load_addr}'
|
||||
setenv load_hello_tftp 'tftp ${load_addr_hello} /examples/hello_world.bin'
|
||||
setenv go_tftp 'run load_hello_tftp; go ${load_addr_hello}'
|
||||
setenv addmisc 'setenv bootargs ${bootargs} console=ttyS0,${baudrate} rd_start=${rd_start} rd_size=${rd_size} ethaddr=${ethaddr}'
|
||||
setenv bootcmd 'run boot_tftp_flash'
|
||||
|
||||
10) Now you can boot from flash, ide, ide+ext2 and tfp
|
||||
|
||||
# qemu-system-mips -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide
|
||||
|
||||
II) How to debug U-Boot
|
||||
|
||||
In order to debug U-Boot you need to start qemu with gdb server support (-s)
|
||||
and waiting the connection to start the CPU (-S)
|
||||
|
||||
# qemu-system-mips -S -s -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide
|
||||
|
||||
in an other console you start gdb
|
||||
|
||||
1) Debugging of U-Boot Before Relocation
|
||||
|
||||
Before relocation, the addresses in the ELF file can be used without any problems
|
||||
by connecting to the gdb server localhost:1234
|
||||
|
||||
# mipsel-unknown-linux-gnu-gdb u-boot
|
||||
GNU gdb 6.6
|
||||
Copyright (C) 2006 Free Software Foundation, Inc.
|
||||
GDB is free software, covered by the GNU General Public License, and you are
|
||||
welcome to change it and/or distribute copies of it under certain conditions.
|
||||
Type "show copying" to see the conditions.
|
||||
There is absolutely no warranty for GDB. Type "show warranty" for details.
|
||||
This GDB was configured as "--host=i486-linux-gnu --target=mipsel-unknown-linux-gnu"...
|
||||
(gdb) target remote localhost:1234
|
||||
Remote debugging using localhost:1234
|
||||
_start () at start.S:64
|
||||
64 RVECENT(reset,0) /* U-boot entry point */
|
||||
Current language: auto; currently asm
|
||||
(gdb) b board.c:289
|
||||
Breakpoint 1 at 0xbfc00cc8: file board.c, line 289.
|
||||
(gdb) c
|
||||
Continuing.
|
||||
|
||||
Breakpoint 1, board_init_f (bootflag=<value optimized out>) at board.c:290
|
||||
290 relocate_code (addr_sp, id, addr);
|
||||
Current language: auto; currently c
|
||||
(gdb) p/x addr
|
||||
$1 = 0x87fa0000
|
||||
|
||||
2) Debugging of U-Boot After Relocation
|
||||
|
||||
For debugging U-Boot after relocation we need to know the address to which
|
||||
U-Boot relocates itself to 0x87fa0000 by default.
|
||||
And replace the symbol table to this offset.
|
||||
|
||||
(gdb) symbol-file
|
||||
Discard symbol table from `/private/u-boot-arm/u-boot'? (y or n) y
|
||||
Error in re-setting breakpoint 1:
|
||||
No symbol table is loaded. Use the "file" command.
|
||||
No symbol file now.
|
||||
(gdb) add-symbol-file u-boot 0x87fa0000
|
||||
add symbol table from file "u-boot" at
|
||||
.text_addr = 0x87fa0000
|
||||
(y or n) y
|
||||
Reading symbols from /private/u-boot-arm/u-boot...done.
|
||||
Breakpoint 1 at 0x87fa0cc8: file board.c, line 289.
|
||||
(gdb) c
|
||||
Continuing.
|
||||
|
||||
Program received signal SIGINT, Interrupt.
|
||||
0xffffffff87fa0de4 in udelay (usec=<value optimized out>) at time.c:78
|
||||
78 while ((tmo - read_c0_count()) < 0x7fffffff)
|
||||
|
|
|
|||
|
|
@ -13,3 +13,401 @@ seem to maintain it any more. I can be reached by mail as
|
|||
tkoeller@gmx.net.
|
||||
|
||||
Thomas Koeller
|
||||
|
||||
|
||||
|
||||
|
||||
The port was tested on a Sandpoint 8240 X3 board, with U-Boot
|
||||
installed in the flash memory of the CPU card. Please use the
|
||||
following DIP switch settings:
|
||||
|
||||
Motherboard:
|
||||
|
||||
SW1.1: on SW1.2: on SW1.3: on SW1.4: on
|
||||
SW1.5: on SW1.6: on SW1.7: on SW1.8: on
|
||||
|
||||
SW2.1: on SW2.2: on SW2.3: on SW2.4: on
|
||||
SW2.5: on SW2.6: on SW2.7: on SW2.8: on
|
||||
|
||||
|
||||
CPU Card:
|
||||
|
||||
SW2.1: OFF SW2.2: OFF SW2.3: on SW2.4: on
|
||||
SW2.5: OFF SW2.6: OFF SW2.7: OFF SW2.8: OFF
|
||||
|
||||
SW3.1: OFF SW3.2: on SW3.3: OFF SW3.4: OFF
|
||||
SW3.5: on SW3.6: OFF SW3.7: OFF SW3.8: on
|
||||
|
||||
|
||||
The followind detailed description of installation and initial steps
|
||||
with U-Boot and QNX was provided by Jim Sandoz <sandoz@lucent.com>:
|
||||
|
||||
|
||||
Directions for installing U-Boot on Sandpoint+Unity8240
|
||||
using the Abatron BDI2000 BDM/JTAG debugger ...
|
||||
|
||||
Background and Reference info:
|
||||
http://u-boot.sourceforge.net/
|
||||
http://www.abatron.ch/
|
||||
http://www.abatron.ch/BDI/bdihw.html
|
||||
http://www.abatron.ch/DataSheets/BDI2000.pdf
|
||||
http://www.abatron.ch/Manuals/ManGdbCOP-2000C.pdf
|
||||
http://e-www.motorola.com/collateral/SPX3UM.pdf
|
||||
http://e-www.motorola.com/collateral/UNITYX4CONFIG.pdf
|
||||
|
||||
|
||||
Connection Diagram:
|
||||
===========
|
||||
=== ===== |----- |
|
||||
| | <---------------> | | | | |
|
||||
|PC | rs232 | BDI |=============[] | |
|
||||
| | |2000 | BDM probe | | |
|
||||
| | <---------------> | | |----- |
|
||||
=== ethernet ===== | |
|
||||
| |
|
||||
===========
|
||||
Sandpoint X3 with
|
||||
Unity 8240 proc
|
||||
|
||||
|
||||
PART 1)
|
||||
DIP Switch Settings:
|
||||
|
||||
Sandpoint X3 8240 processor board DIP switch settings, with
|
||||
U-Boot to be installed in the flash memory of the CPU card:
|
||||
|
||||
Motorola Sandpoint X3 Motherboard:
|
||||
SW1.1: on SW1.2: on SW1.3: on SW1.4: on
|
||||
SW1.5: on SW1.6: on SW1.7: on SW1.8: on
|
||||
SW2.1: on SW2.2: on SW2.3: on SW2.4: on
|
||||
SW2.5: on SW2.6: on SW2.7: on SW2.8: on
|
||||
|
||||
Motorola Unity 8240 CPU Card:
|
||||
SW2.1: OFF SW2.2: OFF SW2.3: on SW2.4: on
|
||||
SW2.5: OFF SW2.6: OFF SW2.7: OFF SW2.8: OFF
|
||||
SW3.1: OFF SW3.2: on SW3.3: OFF SW3.4: OFF
|
||||
SW3.5: on SW3.6: OFF SW3.7: OFF SW3.8: on
|
||||
|
||||
|
||||
PART 2)
|
||||
Connect the BDI2000 Cable to the Sandpoint/Unity 8240:
|
||||
|
||||
BDM Pin 1 on the Unity 8240 processor board is towards the
|
||||
PCI PMC connectors, or away from the socketed SDRAM, i.e.:
|
||||
|
||||
====================
|
||||
| ---------------- |
|
||||
| | SDRAM | |
|
||||
| | | |
|
||||
| ---------------- |
|
||||
| |~| |
|
||||
| |B| ++++++ |
|
||||
| |D| + uP + |
|
||||
| |M| +8240+ |
|
||||
| ~ 1 ++++++ |
|
||||
| |
|
||||
| |
|
||||
| |
|
||||
| PMC conn ====== |
|
||||
| ===== ====== |
|
||||
| |
|
||||
====================
|
||||
|
||||
|
||||
PART 3)
|
||||
Setting up the BDI2000, and preparing for TCP/IP network comms:
|
||||
|
||||
Connect the BDI2000 to the PC using the supplied serial cable.
|
||||
Download the BDI2000 software and install it using setup.exe.
|
||||
|
||||
[Note: of course you can also use the Linux command line tool
|
||||
"bdisetup" to configure your BDI2000 - the sources are included on
|
||||
the floppy disk that comes with your BDI2000. Just in case you don't
|
||||
have any Windows PC's - like me :-) -- wd ]
|
||||
|
||||
Power up the BDI2000; then follow directions to assign the IP
|
||||
address and related network information. Note that U-Boot
|
||||
will be loaded to the Sandpoint via tftp. You need to either
|
||||
use the Abatron-provided tftp application or provide a tftp
|
||||
server (e.g. Linux/Solaris/*BSD) somewhere on your network.
|
||||
Once the IP address etc are assigned via the RS232 port,
|
||||
further communication with the BDI2000 will happen via the
|
||||
ethernet connection.
|
||||
|
||||
PART 4)
|
||||
Making a TCP/IP network connection to the Abatron BDI2000:
|
||||
|
||||
Telnet to the Abatron BDI2000. Assuming that all of the
|
||||
networking info was loaded via RS232 correctly, you will see
|
||||
the following (scrolling):
|
||||
|
||||
- TARGET: waiting for target Vcc
|
||||
- TARGET: waiting for target Vcc
|
||||
|
||||
|
||||
PART 5)
|
||||
Power up the target Sandpoint:
|
||||
If the BDM connections are correct, the following will now appear:
|
||||
|
||||
- TARGET: waiting for target Vcc
|
||||
- TARGET: waiting for target Vcc
|
||||
- TARGET: processing power-up delay
|
||||
- TARGET: processing user reset request
|
||||
- BDI asserts HRESET
|
||||
- Reset JTAG controller passed
|
||||
- Bypass check: 0x55 => 0xAA
|
||||
- Bypass check: 0x55 => 0xAA
|
||||
- JTAG exists check passed
|
||||
- Target PVR is 0x00810101
|
||||
- COP status is 0x01
|
||||
- Check running state passed
|
||||
- BDI scans COP freeze command
|
||||
- BDI removes HRESET
|
||||
- COP status is 0x05
|
||||
- Check stopped state passed
|
||||
- Check LSRL length passed
|
||||
- BDI sets breakpoint at 0xFFF00100
|
||||
- BDI resumes program execution
|
||||
- Waiting for target stop passed
|
||||
- TARGET: Target PVR is 0x00810101
|
||||
- TARGET: reseting target passed
|
||||
- TARGET: processing target startup ....
|
||||
- TARGET: processing target startup passed
|
||||
BDI>
|
||||
|
||||
|
||||
PART 6)
|
||||
Erase the current contents of the flash memory:
|
||||
|
||||
BDI>era 0xFFF00000
|
||||
Erasing flash at 0xfff00000
|
||||
Erasing flash passed
|
||||
BDI>era 0xFFF04000
|
||||
Erasing flash at 0xfff04000
|
||||
Erasing flash passed
|
||||
BDI>era 0xFFF06000
|
||||
Erasing flash at 0xfff06000
|
||||
Erasing flash passed
|
||||
BDI>era 0xFFF08000
|
||||
Erasing flash at 0xfff08000
|
||||
Erasing flash passed
|
||||
BDI>era 0xFFF10000
|
||||
Erasing flash at 0xfff10000
|
||||
Erasing flash passed
|
||||
BDI>era 0xFFF20000
|
||||
Erasing flash at 0xfff20000
|
||||
Erasing flash passed
|
||||
|
||||
|
||||
PART 7)
|
||||
Program the flash memory with the U-Boot image:
|
||||
|
||||
BDI>prog 0xFFF00000 u-boot.bin bin
|
||||
Programming u-boot.bin , please wait ....
|
||||
Programming flash passed
|
||||
|
||||
|
||||
PART 8)
|
||||
Connect PC to Sandpoint:
|
||||
Using a crossover serial cable, attach the PC serial port to the
|
||||
Sandpoint's COM1. Set communications parameters to 8N1 / 9600 baud.
|
||||
|
||||
|
||||
PART 9)
|
||||
Reset the Unity and begin U-Boot execution:
|
||||
|
||||
BDI>reset
|
||||
- TARGET: processing user reset request
|
||||
- TARGET: Target PVR is 0x00810101
|
||||
- TARGET: reseting target passed
|
||||
- TARGET: processing target init list ....
|
||||
- TARGET: processing target init list passed
|
||||
|
||||
BDI>go
|
||||
|
||||
Now see output from U-Boot running, sent via serial port:
|
||||
|
||||
U-Boot 1.1.4 (Jan 23 2002 - 18:29:19)
|
||||
|
||||
CPU: MPC8240 Revision 1.1 at 264 MHz: 16 kB I-Cache 16 kB D-Cache
|
||||
Board: Sandpoint 8240 Unity
|
||||
DRAM: 64 MB
|
||||
FLASH: 2 MB
|
||||
PCI: scanning bus0 ...
|
||||
bus dev fn venID devID class rev MBAR0 MBAR1 IPIN ILINE
|
||||
00 00 00 1057 0003 060000 13 00000008 00000000 01 00
|
||||
00 0b 00 10ad 0565 060100 10 00000000 00000000 00 00
|
||||
00 0f 00 8086 1229 020000 08 80000000 80000001 01 00
|
||||
In: serial
|
||||
Out: serial
|
||||
Err: serial
|
||||
=>
|
||||
|
||||
|
||||
PART 10)
|
||||
Set and save any required environmental variables, examples of some:
|
||||
|
||||
=> setenv ethaddr 00:03:47:97:D0:79
|
||||
=> setenv bootfile your_qnx_image_here
|
||||
=> setenv hostname sandpointX
|
||||
=> setenv netmask 255.255.255.0
|
||||
=> setenv ipaddr 192.168.0.11
|
||||
=> setenv serverip 192.168.0.10
|
||||
=> setenv gatewayip=192.168.0.1
|
||||
=> saveenv
|
||||
Saving Environment to Flash...
|
||||
Un-Protected 1 sectors
|
||||
Erasing Flash...
|
||||
done
|
||||
Erased 1 sectors
|
||||
Writing to Flash... done
|
||||
Protected 1 sectors
|
||||
=>
|
||||
|
||||
**** Example environment: ****
|
||||
|
||||
=> printenv
|
||||
baudrate=9600
|
||||
bootfile=telemetry
|
||||
hostname=sp1
|
||||
ethaddr=00:03:47:97:E4:6B
|
||||
load=tftp 100000 u-boot.bin
|
||||
update=protect off all;era FFF00000 FFF3FFFF;cp.b 100000 FFF00000 ${filesize};saveenv
|
||||
filesize=1f304
|
||||
gatewayip=145.17.228.1
|
||||
netmask=255.255.255.0
|
||||
ipaddr=145.17.228.42
|
||||
serverip=145.17.242.46
|
||||
stdin=serial
|
||||
stdout=serial
|
||||
stderr=serial
|
||||
|
||||
Environment size: 332/8188 bytes
|
||||
=>
|
||||
|
||||
here's some text useful stuff for cut-n-paste:
|
||||
setenv hostname sandpoint1
|
||||
setenv netmask 255.255.255.0
|
||||
setenv ipaddr 145.17.228.81
|
||||
setenv serverip 145.17.242.46
|
||||
setenv gatewayip 145.17.228.1
|
||||
saveenv
|
||||
|
||||
PART 11)
|
||||
Test U-Boot by tftp'ing new U-Boot, overwriting current:
|
||||
|
||||
=> protect off all
|
||||
Un-Protect Flash Bank # 1
|
||||
=> tftp 100000 u-boot.bin
|
||||
eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
|
||||
ARP broadcast 1
|
||||
TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
|
||||
gateway 145.17.228.1
|
||||
Filename 'u-boot.bin'.
|
||||
Load address: 0x100000
|
||||
Loading: #########################
|
||||
done
|
||||
Bytes transferred = 127628 (1f28c hex)
|
||||
=> era all
|
||||
Erase Flash Bank # 1
|
||||
done
|
||||
Erase Flash Bank # 2 - missing
|
||||
=> cp.b 0x100000 FFF00000 1f28c
|
||||
Copy to Flash... done
|
||||
=> saveenv
|
||||
Saving Environment to Flash...
|
||||
Un-Protected 1 sectors
|
||||
Erasing Flash...
|
||||
done
|
||||
Erased 1 sectors
|
||||
Writing to Flash... done
|
||||
Protected 1 sectors
|
||||
=> reset
|
||||
|
||||
You can put these commands into some environment variables;
|
||||
|
||||
=> setenv load tftp 100000 u-boot.bin
|
||||
=> setenv update protect off all\;era FFF00000 FFF3FFFF\;cp.b 100000 FFF00000 \${filesize}\;saveenv
|
||||
=> saveenv
|
||||
|
||||
Then you just have to type "run load" then "run update"
|
||||
|
||||
=> run load
|
||||
eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
|
||||
ARP broadcast 1
|
||||
TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
|
||||
gateway 145.17.228.1
|
||||
Filename 'u-boot.bin'.
|
||||
Load address: 0x100000
|
||||
Loading: #########################
|
||||
done
|
||||
Bytes transferred = 127748 (1f304 hex)
|
||||
=> run update
|
||||
Un-Protect Flash Bank # 1
|
||||
Un-Protect Flash Bank # 2
|
||||
Erase Flash from 0xfff00000 to 0xfff3ffff
|
||||
done
|
||||
Erased 7 sectors
|
||||
Copy to Flash... done
|
||||
Saving Environment to Flash...
|
||||
Un-Protected 1 sectors
|
||||
Erasing Flash...
|
||||
done
|
||||
Erased 1 sectors
|
||||
Writing to Flash... done
|
||||
Protected 1 sectors
|
||||
=>
|
||||
|
||||
|
||||
PART 12)
|
||||
Load OS image (ELF format) via U-Boot using tftp
|
||||
|
||||
|
||||
=> tftp 800000 sandpoint-simple.elf
|
||||
eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
|
||||
ARP broadcast 1
|
||||
TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
|
||||
gateway 145.17.228.1
|
||||
Filename 'sandpoint-simple.elf'.
|
||||
Load address: 0x800000
|
||||
Loading: #################################################################
|
||||
#################################################################
|
||||
#################################################################
|
||||
########################
|
||||
done
|
||||
Bytes transferred = 1120284 (11181c hex)
|
||||
==>
|
||||
|
||||
PART 13)
|
||||
Begin OS image execution: (note that unless you have the
|
||||
serial parameters of your OS image set to 9600 (i.e. same as
|
||||
the U-Boot binary) you will get garbage here until you change
|
||||
the serial communications speed.
|
||||
|
||||
=> bootelf 800000
|
||||
Loading @ 0x001f0100 (1120028 bytes)
|
||||
## Starting application at 0x001f1d28 ...
|
||||
Replace init_hwinfo() with a board specific version
|
||||
|
||||
Loading QNX6....
|
||||
|
||||
Header size=0x0000009c, Total Size=0x000005c0, #Cpu=1, Type=1
|
||||
<...loader and kernel messages snipped...>
|
||||
|
||||
Welcome to Neutrino on the Sandpoint
|
||||
#
|
||||
|
||||
|
||||
other information:
|
||||
|
||||
CVS Retrieval Notes:
|
||||
|
||||
U-Boot's SourceForge CVS repository can be checked out
|
||||
through anonymous (pserver) CVS with the following
|
||||
instruction set. The module you wish to check out must
|
||||
be specified as the modulename. When prompted for a
|
||||
password for anonymous, simply press the Enter key.
|
||||
|
||||
cvs -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot login
|
||||
|
||||
cvs -z6 -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot co -P u-boot
|
||||
|
|
|
|||
|
|
@ -1,24 +0,0 @@
|
|||
This document contains different information about the port
|
||||
of U-Boot for the OXC board designed by Lucent Technologies,
|
||||
Inc.
|
||||
|
||||
1. Showing activity
|
||||
|
||||
U-Boot for the OXC board can show its current status using
|
||||
the Active LED. This feature is configured by the following
|
||||
options:
|
||||
|
||||
CONFIG_SHOW_ACTIVITY
|
||||
|
||||
When this option is on, the Active LED is blinking fast
|
||||
when U-Boot runs in the idle loop (i.e. waits for user
|
||||
commands from serial console) and blinking slow when it
|
||||
downloads an image over network. When U-Boot loads an image
|
||||
over serial line the Active LED does not blink and its state
|
||||
is random (i.e. either constant on or constant off).
|
||||
|
||||
CONFIG_SHOW_BOOT_PROGRESS
|
||||
|
||||
When this option is on, U-Boot switches the Active LED
|
||||
off before booting an image and switches it on if booting
|
||||
failed due to some reasons.
|
||||
|
|
@ -1,394 +0,0 @@
|
|||
The port was tested on a Sandpoint 8240 X3 board, with U-Boot
|
||||
installed in the flash memory of the CPU card. Please use the
|
||||
following DIP switch settings:
|
||||
|
||||
Motherboard:
|
||||
|
||||
SW1.1: on SW1.2: on SW1.3: on SW1.4: on
|
||||
SW1.5: on SW1.6: on SW1.7: on SW1.8: on
|
||||
|
||||
SW2.1: on SW2.2: on SW2.3: on SW2.4: on
|
||||
SW2.5: on SW2.6: on SW2.7: on SW2.8: on
|
||||
|
||||
|
||||
CPU Card:
|
||||
|
||||
SW2.1: OFF SW2.2: OFF SW2.3: on SW2.4: on
|
||||
SW2.5: OFF SW2.6: OFF SW2.7: OFF SW2.8: OFF
|
||||
|
||||
SW3.1: OFF SW3.2: on SW3.3: OFF SW3.4: OFF
|
||||
SW3.5: on SW3.6: OFF SW3.7: OFF SW3.8: on
|
||||
|
||||
|
||||
The followind detailed description of installation and initial steps
|
||||
with U-Boot and QNX was provided by Jim Sandoz <sandoz@lucent.com>:
|
||||
|
||||
|
||||
Directions for installing U-Boot on Sandpoint+Unity8240
|
||||
using the Abatron BDI2000 BDM/JTAG debugger ...
|
||||
|
||||
Background and Reference info:
|
||||
http://u-boot.sourceforge.net/
|
||||
http://www.abatron.ch/
|
||||
http://www.abatron.ch/BDI/bdihw.html
|
||||
http://www.abatron.ch/DataSheets/BDI2000.pdf
|
||||
http://www.abatron.ch/Manuals/ManGdbCOP-2000C.pdf
|
||||
http://e-www.motorola.com/collateral/SPX3UM.pdf
|
||||
http://e-www.motorola.com/collateral/UNITYX4CONFIG.pdf
|
||||
|
||||
|
||||
Connection Diagram:
|
||||
===========
|
||||
=== ===== |----- |
|
||||
| | <---------------> | | | | |
|
||||
|PC | rs232 | BDI |=============[] | |
|
||||
| | |2000 | BDM probe | | |
|
||||
| | <---------------> | | |----- |
|
||||
=== ethernet ===== | |
|
||||
| |
|
||||
===========
|
||||
Sandpoint X3 with
|
||||
Unity 8240 proc
|
||||
|
||||
|
||||
PART 1)
|
||||
DIP Switch Settings:
|
||||
|
||||
Sandpoint X3 8240 processor board DIP switch settings, with
|
||||
U-Boot to be installed in the flash memory of the CPU card:
|
||||
|
||||
Motorola Sandpoint X3 Motherboard:
|
||||
SW1.1: on SW1.2: on SW1.3: on SW1.4: on
|
||||
SW1.5: on SW1.6: on SW1.7: on SW1.8: on
|
||||
SW2.1: on SW2.2: on SW2.3: on SW2.4: on
|
||||
SW2.5: on SW2.6: on SW2.7: on SW2.8: on
|
||||
|
||||
Motorola Unity 8240 CPU Card:
|
||||
SW2.1: OFF SW2.2: OFF SW2.3: on SW2.4: on
|
||||
SW2.5: OFF SW2.6: OFF SW2.7: OFF SW2.8: OFF
|
||||
SW3.1: OFF SW3.2: on SW3.3: OFF SW3.4: OFF
|
||||
SW3.5: on SW3.6: OFF SW3.7: OFF SW3.8: on
|
||||
|
||||
|
||||
PART 2)
|
||||
Connect the BDI2000 Cable to the Sandpoint/Unity 8240:
|
||||
|
||||
BDM Pin 1 on the Unity 8240 processor board is towards the
|
||||
PCI PMC connectors, or away from the socketed SDRAM, i.e.:
|
||||
|
||||
====================
|
||||
| ---------------- |
|
||||
| | SDRAM | |
|
||||
| | | |
|
||||
| ---------------- |
|
||||
| |~| |
|
||||
| |B| ++++++ |
|
||||
| |D| + uP + |
|
||||
| |M| +8240+ |
|
||||
| ~ 1 ++++++ |
|
||||
| |
|
||||
| |
|
||||
| |
|
||||
| PMC conn ====== |
|
||||
| ===== ====== |
|
||||
| |
|
||||
====================
|
||||
|
||||
|
||||
PART 3)
|
||||
Setting up the BDI2000, and preparing for TCP/IP network comms:
|
||||
|
||||
Connect the BDI2000 to the PC using the supplied serial cable.
|
||||
Download the BDI2000 software and install it using setup.exe.
|
||||
|
||||
[Note: of course you can also use the Linux command line tool
|
||||
"bdisetup" to configure your BDI2000 - the sources are included on
|
||||
the floppy disk that comes with your BDI2000. Just in case you don't
|
||||
have any Windows PC's - like me :-) -- wd ]
|
||||
|
||||
Power up the BDI2000; then follow directions to assign the IP
|
||||
address and related network information. Note that U-Boot
|
||||
will be loaded to the Sandpoint via tftp. You need to either
|
||||
use the Abatron-provided tftp application or provide a tftp
|
||||
server (e.g. Linux/Solaris/*BSD) somewhere on your network.
|
||||
Once the IP address etc are assigned via the RS232 port,
|
||||
further communication with the BDI2000 will happen via the
|
||||
ethernet connection.
|
||||
|
||||
PART 4)
|
||||
Making a TCP/IP network connection to the Abatron BDI2000:
|
||||
|
||||
Telnet to the Abatron BDI2000. Assuming that all of the
|
||||
networking info was loaded via RS232 correctly, you will see
|
||||
the following (scrolling):
|
||||
|
||||
- TARGET: waiting for target Vcc
|
||||
- TARGET: waiting for target Vcc
|
||||
|
||||
|
||||
PART 5)
|
||||
Power up the target Sandpoint:
|
||||
If the BDM connections are correct, the following will now appear:
|
||||
|
||||
- TARGET: waiting for target Vcc
|
||||
- TARGET: waiting for target Vcc
|
||||
- TARGET: processing power-up delay
|
||||
- TARGET: processing user reset request
|
||||
- BDI asserts HRESET
|
||||
- Reset JTAG controller passed
|
||||
- Bypass check: 0x55 => 0xAA
|
||||
- Bypass check: 0x55 => 0xAA
|
||||
- JTAG exists check passed
|
||||
- Target PVR is 0x00810101
|
||||
- COP status is 0x01
|
||||
- Check running state passed
|
||||
- BDI scans COP freeze command
|
||||
- BDI removes HRESET
|
||||
- COP status is 0x05
|
||||
- Check stopped state passed
|
||||
- Check LSRL length passed
|
||||
- BDI sets breakpoint at 0xFFF00100
|
||||
- BDI resumes program execution
|
||||
- Waiting for target stop passed
|
||||
- TARGET: Target PVR is 0x00810101
|
||||
- TARGET: reseting target passed
|
||||
- TARGET: processing target startup ....
|
||||
- TARGET: processing target startup passed
|
||||
BDI>
|
||||
|
||||
|
||||
PART 6)
|
||||
Erase the current contents of the flash memory:
|
||||
|
||||
BDI>era 0xFFF00000
|
||||
Erasing flash at 0xfff00000
|
||||
Erasing flash passed
|
||||
BDI>era 0xFFF04000
|
||||
Erasing flash at 0xfff04000
|
||||
Erasing flash passed
|
||||
BDI>era 0xFFF06000
|
||||
Erasing flash at 0xfff06000
|
||||
Erasing flash passed
|
||||
BDI>era 0xFFF08000
|
||||
Erasing flash at 0xfff08000
|
||||
Erasing flash passed
|
||||
BDI>era 0xFFF10000
|
||||
Erasing flash at 0xfff10000
|
||||
Erasing flash passed
|
||||
BDI>era 0xFFF20000
|
||||
Erasing flash at 0xfff20000
|
||||
Erasing flash passed
|
||||
|
||||
|
||||
PART 7)
|
||||
Program the flash memory with the U-Boot image:
|
||||
|
||||
BDI>prog 0xFFF00000 u-boot.bin bin
|
||||
Programming u-boot.bin , please wait ....
|
||||
Programming flash passed
|
||||
|
||||
|
||||
PART 8)
|
||||
Connect PC to Sandpoint:
|
||||
Using a crossover serial cable, attach the PC serial port to the
|
||||
Sandpoint's COM1. Set communications parameters to 8N1 / 9600 baud.
|
||||
|
||||
|
||||
PART 9)
|
||||
Reset the Unity and begin U-Boot execution:
|
||||
|
||||
BDI>reset
|
||||
- TARGET: processing user reset request
|
||||
- TARGET: Target PVR is 0x00810101
|
||||
- TARGET: reseting target passed
|
||||
- TARGET: processing target init list ....
|
||||
- TARGET: processing target init list passed
|
||||
|
||||
BDI>go
|
||||
|
||||
Now see output from U-Boot running, sent via serial port:
|
||||
|
||||
U-Boot 1.1.4 (Jan 23 2002 - 18:29:19)
|
||||
|
||||
CPU: MPC8240 Revision 1.1 at 264 MHz: 16 kB I-Cache 16 kB D-Cache
|
||||
Board: Sandpoint 8240 Unity
|
||||
DRAM: 64 MB
|
||||
FLASH: 2 MB
|
||||
PCI: scanning bus0 ...
|
||||
bus dev fn venID devID class rev MBAR0 MBAR1 IPIN ILINE
|
||||
00 00 00 1057 0003 060000 13 00000008 00000000 01 00
|
||||
00 0b 00 10ad 0565 060100 10 00000000 00000000 00 00
|
||||
00 0f 00 8086 1229 020000 08 80000000 80000001 01 00
|
||||
In: serial
|
||||
Out: serial
|
||||
Err: serial
|
||||
=>
|
||||
|
||||
|
||||
PART 10)
|
||||
Set and save any required environmental variables, examples of some:
|
||||
|
||||
=> setenv ethaddr 00:03:47:97:D0:79
|
||||
=> setenv bootfile your_qnx_image_here
|
||||
=> setenv hostname sandpointX
|
||||
=> setenv netmask 255.255.255.0
|
||||
=> setenv ipaddr 192.168.0.11
|
||||
=> setenv serverip 192.168.0.10
|
||||
=> setenv gatewayip=192.168.0.1
|
||||
=> saveenv
|
||||
Saving Environment to Flash...
|
||||
Un-Protected 1 sectors
|
||||
Erasing Flash...
|
||||
done
|
||||
Erased 1 sectors
|
||||
Writing to Flash... done
|
||||
Protected 1 sectors
|
||||
=>
|
||||
|
||||
**** Example environment: ****
|
||||
|
||||
=> printenv
|
||||
baudrate=9600
|
||||
bootfile=telemetry
|
||||
hostname=sp1
|
||||
ethaddr=00:03:47:97:E4:6B
|
||||
load=tftp 100000 u-boot.bin
|
||||
update=protect off all;era FFF00000 FFF3FFFF;cp.b 100000 FFF00000 ${filesize};saveenv
|
||||
filesize=1f304
|
||||
gatewayip=145.17.228.1
|
||||
netmask=255.255.255.0
|
||||
ipaddr=145.17.228.42
|
||||
serverip=145.17.242.46
|
||||
stdin=serial
|
||||
stdout=serial
|
||||
stderr=serial
|
||||
|
||||
Environment size: 332/8188 bytes
|
||||
=>
|
||||
|
||||
here's some text useful stuff for cut-n-paste:
|
||||
setenv hostname sandpoint1
|
||||
setenv netmask 255.255.255.0
|
||||
setenv ipaddr 145.17.228.81
|
||||
setenv serverip 145.17.242.46
|
||||
setenv gatewayip 145.17.228.1
|
||||
saveenv
|
||||
|
||||
PART 11)
|
||||
Test U-Boot by tftp'ing new U-Boot, overwriting current:
|
||||
|
||||
=> protect off all
|
||||
Un-Protect Flash Bank # 1
|
||||
=> tftp 100000 u-boot.bin
|
||||
eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
|
||||
ARP broadcast 1
|
||||
TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
|
||||
gateway 145.17.228.1
|
||||
Filename 'u-boot.bin'.
|
||||
Load address: 0x100000
|
||||
Loading: #########################
|
||||
done
|
||||
Bytes transferred = 127628 (1f28c hex)
|
||||
=> era all
|
||||
Erase Flash Bank # 1
|
||||
done
|
||||
Erase Flash Bank # 2 - missing
|
||||
=> cp.b 0x100000 FFF00000 1f28c
|
||||
Copy to Flash... done
|
||||
=> saveenv
|
||||
Saving Environment to Flash...
|
||||
Un-Protected 1 sectors
|
||||
Erasing Flash...
|
||||
done
|
||||
Erased 1 sectors
|
||||
Writing to Flash... done
|
||||
Protected 1 sectors
|
||||
=> reset
|
||||
|
||||
You can put these commands into some environment variables;
|
||||
|
||||
=> setenv load tftp 100000 u-boot.bin
|
||||
=> setenv update protect off all\;era FFF00000 FFF3FFFF\;cp.b 100000 FFF00000 \${filesize}\;saveenv
|
||||
=> saveenv
|
||||
|
||||
Then you just have to type "run load" then "run update"
|
||||
|
||||
=> run load
|
||||
eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
|
||||
ARP broadcast 1
|
||||
TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
|
||||
gateway 145.17.228.1
|
||||
Filename 'u-boot.bin'.
|
||||
Load address: 0x100000
|
||||
Loading: #########################
|
||||
done
|
||||
Bytes transferred = 127748 (1f304 hex)
|
||||
=> run update
|
||||
Un-Protect Flash Bank # 1
|
||||
Un-Protect Flash Bank # 2
|
||||
Erase Flash from 0xfff00000 to 0xfff3ffff
|
||||
done
|
||||
Erased 7 sectors
|
||||
Copy to Flash... done
|
||||
Saving Environment to Flash...
|
||||
Un-Protected 1 sectors
|
||||
Erasing Flash...
|
||||
done
|
||||
Erased 1 sectors
|
||||
Writing to Flash... done
|
||||
Protected 1 sectors
|
||||
=>
|
||||
|
||||
|
||||
PART 12)
|
||||
Load OS image (ELF format) via U-Boot using tftp
|
||||
|
||||
|
||||
=> tftp 800000 sandpoint-simple.elf
|
||||
eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
|
||||
ARP broadcast 1
|
||||
TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
|
||||
gateway 145.17.228.1
|
||||
Filename 'sandpoint-simple.elf'.
|
||||
Load address: 0x800000
|
||||
Loading: #################################################################
|
||||
#################################################################
|
||||
#################################################################
|
||||
########################
|
||||
done
|
||||
Bytes transferred = 1120284 (11181c hex)
|
||||
==>
|
||||
|
||||
PART 13)
|
||||
Begin OS image execution: (note that unless you have the
|
||||
serial parameters of your OS image set to 9600 (i.e. same as
|
||||
the U-Boot binary) you will get garbage here until you change
|
||||
the serial communications speed.
|
||||
|
||||
=> bootelf 800000
|
||||
Loading @ 0x001f0100 (1120028 bytes)
|
||||
## Starting application at 0x001f1d28 ...
|
||||
Replace init_hwinfo() with a board specific version
|
||||
|
||||
Loading QNX6....
|
||||
|
||||
Header size=0x0000009c, Total Size=0x000005c0, #Cpu=1, Type=1
|
||||
<...loader and kernel messages snipped...>
|
||||
|
||||
Welcome to Neutrino on the Sandpoint
|
||||
#
|
||||
|
||||
|
||||
other information:
|
||||
|
||||
CVS Retrieval Notes:
|
||||
|
||||
U-Boot's SourceForge CVS repository can be checked out
|
||||
through anonymous (pserver) CVS with the following
|
||||
instruction set. The module you wish to check out must
|
||||
be specified as the modulename. When prompted for a
|
||||
password for anonymous, simply press the Enter key.
|
||||
|
||||
cvs -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot login
|
||||
|
||||
cvs -z6 -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot co -P u-boot
|
||||
|
|
@ -1,12 +0,0 @@
|
|||
AmigaOne U-Boot and the SciTech emulator
|
||||
|
||||
The directory board/MAI/bios_emulator contains the source code
|
||||
of the SciTech x86 emulator. This emulator is normally available
|
||||
under a BSD license. However, SciTech kindly gave us permission
|
||||
to use their emulator in PPCBoot for the AmigaOne. It's available
|
||||
in this form only under GPL.
|
||||
|
||||
Thanks to Kendall Bennett and the rest of the team at SciTech.
|
||||
See http://www.scitechsoft.com for their web site
|
||||
|
||||
The GPL license can be found at http://www.gnu.org/licenses/gpl.html
|
||||
|
|
@ -1,32 +0,0 @@
|
|||
Overview
|
||||
--------
|
||||
The P4080DS is a Freescale reference board that hosts the eight-core P4080 SOC.
|
||||
|
||||
SerDes hwconfig configuration
|
||||
-----------------------------
|
||||
The P4080 RCW includes three sets of bits the specify which SerDes lanes
|
||||
should be powered down: SRDS_LPD_B1 (for bank one), SRDS_LPD_B2 (for bank two),
|
||||
and SRDS_LPD_B3 (for bank three). Each of these contains four bits, one for
|
||||
each lane in the bank. SerDes Erratum SERDES8 requires that SRDS_LPD_B2 and
|
||||
SRDS_LPD_B3 be set to 0b1111. This forces banks two and three to be powered
|
||||
down at reset.
|
||||
|
||||
To re-enable these banks in U-Boot, two hwconfig are available:
|
||||
"fsl_srds_lpd_b2" and "fsl_srds_lpd_b3". The value passed via fsl_srds_lpd_b2
|
||||
is written into SRDS_LPD_B2, and the value passed via fsl_srds_lpd_b3 is into
|
||||
SRDS_LPD_B3. Each bit represents one of each bank, and a value of '1'
|
||||
indicates that the lane should be powered down.
|
||||
|
||||
For example, to indicate that both SerDes banks 2 and 3 are powered down, add
|
||||
the following to hwconfig:
|
||||
|
||||
serdes:fsl_srds_lpd_b2=0xf,fsl_srds_lpd_b3=0xf
|
||||
|
||||
The "0xf" is a mask that corresponds to the 4 lanes A-D. The most significant
|
||||
bit corresponds to lane A. To indicate that just lane A of bank 3 is to be
|
||||
powered down, use:
|
||||
|
||||
serdes:fsl_srds_lpd_b3=8
|
||||
|
||||
These options should be specified only if U-Boot does not automatically power
|
||||
on the correct lanes.
|
||||
|
|
@ -1,164 +0,0 @@
|
|||
|
||||
Notes for the Qemu MIPS port
|
||||
|
||||
I) Example usage:
|
||||
|
||||
# ln -s u-boot.bin mips_bios.bin
|
||||
start it:
|
||||
qemu-system-mips -L . /dev/null -nographic
|
||||
|
||||
or
|
||||
|
||||
if you use a qemu version after commit 4224
|
||||
|
||||
create image:
|
||||
# dd of=flash bs=1k count=4k if=/dev/zero
|
||||
# dd of=flash bs=1k conv=notrunc if=u-boot.bin
|
||||
start it:
|
||||
# qemu-system-mips -M mips -pflash flash -monitor null -nographic
|
||||
|
||||
2) Download kernel + initrd
|
||||
|
||||
On ftp://ftp.denx.de/pub/contrib/Jean-Christophe_Plagniol-Villard/qemu_mips/
|
||||
you can downland
|
||||
|
||||
#config to build the kernel
|
||||
qemu_mips_defconfig
|
||||
#patch to fix mips interrupt init on 2.6.24.y kernel
|
||||
qemu_mips_kernel.patch
|
||||
initrd.gz
|
||||
vmlinux
|
||||
vmlinux.bin
|
||||
System.map
|
||||
|
||||
4) Generate uImage
|
||||
|
||||
# tools/mkimage -A mips -O linux -T kernel -C gzip -a 0x80010000 -e 0x80245650 -n "Linux 2.6.24.y" -d vmlinux.bin.gz uImage
|
||||
|
||||
5) Copy uImage to Flash
|
||||
# dd if=uImage bs=1k conv=notrunc seek=224 of=flash
|
||||
|
||||
6) Generate Ide Disk
|
||||
|
||||
# dd of=ide bs=1k cout=100k if=/dev/zero
|
||||
|
||||
# sfdisk -C 261 -d ide
|
||||
# partition table of ide
|
||||
unit: sectors
|
||||
|
||||
ide1 : start= 63, size= 32067, Id=83
|
||||
ide2 : start= 32130, size= 32130, Id=83
|
||||
ide3 : start= 64260, size= 4128705, Id=83
|
||||
ide4 : start= 0, size= 0, Id= 0
|
||||
|
||||
7) Copy to ide
|
||||
|
||||
# dd if=uImage bs=512 conv=notrunc seek=63 of=ide
|
||||
|
||||
8) Generate ext2 on part 2 on Copy uImage and initrd.gz
|
||||
|
||||
# Attached as loop device ide offset = 32130 * 512
|
||||
# losetup -o 16450560 -f ide
|
||||
# Format as ext2 ( arg2 : nb blocks)
|
||||
# mke2fs /dev/loop0 16065
|
||||
# losetup -d /dev/loop0
|
||||
# Mount and copy uImage and initrd.gz to it
|
||||
# mount -o loop,offset=16450560 -t ext2 ide /mnt
|
||||
# mkdir /mnt/boot
|
||||
# cp {initrd.gz,uImage} /mnt/boot/
|
||||
# Umount it
|
||||
# umount /mnt
|
||||
|
||||
9) Set Environment
|
||||
|
||||
setenv rd_start 0x80800000
|
||||
setenv rd_size 2663940
|
||||
setenv kernel BFC38000
|
||||
setenv oad_addr 80500000
|
||||
setenv load_addr2 80F00000
|
||||
setenv kernel_flash BFC38000
|
||||
setenv load_addr_hello 80200000
|
||||
setenv bootargs 'root=/dev/ram0 init=/bin/sh'
|
||||
setenv load_rd_ext2 'ide res; ext2load ide 0:2 ${rd_start} /boot/initrd.gz'
|
||||
setenv load_rd_tftp 'tftp ${rd_start} /initrd.gz'
|
||||
setenv load_kernel_hda 'ide res; diskboot ${load_addr} 0:2'
|
||||
setenv load_kernel_ext2 'ide res; ext2load ide 0:2 ${load_addr} /boot/uImage'
|
||||
setenv load_kernel_tftp 'tftp ${load_addr} /qemu_mips/uImage'
|
||||
setenv boot_ext2_ext2 'run load_rd_ext2; run load_kernel_ext2; run addmisc; bootm ${load_addr}'
|
||||
setenv boot_ext2_flash 'run load_rd_ext2; run addmisc; bootm ${kernel_flash}'
|
||||
setenv boot_ext2_hda 'run load_rd_ext2; run load_kernel_hda; run addmisc; bootm ${load_addr}'
|
||||
setenv boot_ext2_tftp 'run load_rd_ext2; run load_kernel_tftp; run addmisc; bootm ${load_addr}'
|
||||
setenv boot_tftp_hda 'run load_rd_tftp; run load_kernel_hda; run addmisc; bootm ${load_addr}'
|
||||
setenv boot_tftp_ext2 'run load_rd_tftp; run load_kernel_ext2; run addmisc; bootm ${load_addr}'
|
||||
setenv boot_tftp_flash 'run load_rd_tftp; run addmisc; bootm ${kernel_flash}'
|
||||
setenv boot_tftp_tftp 'run load_rd_tftp; run load_kernel_tftp; run addmisc; bootm ${load_addr}'
|
||||
setenv load_hello_tftp 'tftp ${load_addr_hello} /examples/hello_world.bin'
|
||||
setenv go_tftp 'run load_hello_tftp; go ${load_addr_hello}'
|
||||
setenv addmisc 'setenv bootargs ${bootargs} console=ttyS0,${baudrate} rd_start=${rd_start} rd_size=${rd_size} ethaddr=${ethaddr}'
|
||||
setenv bootcmd 'run boot_tftp_flash'
|
||||
|
||||
10) Now you can boot from flash, ide, ide+ext2 and tfp
|
||||
|
||||
# qemu-system-mips -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide
|
||||
|
||||
II) How to debug U-Boot
|
||||
|
||||
In order to debug U-Boot you need to start qemu with gdb server support (-s)
|
||||
and waiting the connection to start the CPU (-S)
|
||||
|
||||
# qemu-system-mips -S -s -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide
|
||||
|
||||
in an other console you start gdb
|
||||
|
||||
1) Debugging of U-Boot Before Relocation
|
||||
|
||||
Before relocation, the addresses in the ELF file can be used without any problems
|
||||
by connecting to the gdb server localhost:1234
|
||||
|
||||
# mipsel-unknown-linux-gnu-gdb u-boot
|
||||
GNU gdb 6.6
|
||||
Copyright (C) 2006 Free Software Foundation, Inc.
|
||||
GDB is free software, covered by the GNU General Public License, and you are
|
||||
welcome to change it and/or distribute copies of it under certain conditions.
|
||||
Type "show copying" to see the conditions.
|
||||
There is absolutely no warranty for GDB. Type "show warranty" for details.
|
||||
This GDB was configured as "--host=i486-linux-gnu --target=mipsel-unknown-linux-gnu"...
|
||||
(gdb) target remote localhost:1234
|
||||
Remote debugging using localhost:1234
|
||||
_start () at start.S:64
|
||||
64 RVECENT(reset,0) /* U-boot entry point */
|
||||
Current language: auto; currently asm
|
||||
(gdb) b board.c:289
|
||||
Breakpoint 1 at 0xbfc00cc8: file board.c, line 289.
|
||||
(gdb) c
|
||||
Continuing.
|
||||
|
||||
Breakpoint 1, board_init_f (bootflag=<value optimized out>) at board.c:290
|
||||
290 relocate_code (addr_sp, id, addr);
|
||||
Current language: auto; currently c
|
||||
(gdb) p/x addr
|
||||
$1 = 0x87fa0000
|
||||
|
||||
2) Debugging of U-Boot After Relocation
|
||||
|
||||
For debugging U-Boot after relocation we need to know the address to which
|
||||
U-Boot relocates itself to 0x87fa0000 by default.
|
||||
And replace the symbol table to this offset.
|
||||
|
||||
(gdb) symbol-file
|
||||
Discard symbol table from `/private/u-boot-arm/u-boot'? (y or n) y
|
||||
Error in re-setting breakpoint 1:
|
||||
No symbol table is loaded. Use the "file" command.
|
||||
No symbol file now.
|
||||
(gdb) add-symbol-file u-boot 0x87fa0000
|
||||
add symbol table from file "u-boot" at
|
||||
.text_addr = 0x87fa0000
|
||||
(y or n) y
|
||||
Reading symbols from /private/u-boot-arm/u-boot...done.
|
||||
Breakpoint 1 at 0x87fa0cc8: file board.c, line 289.
|
||||
(gdb) c
|
||||
Continuing.
|
||||
|
||||
Program received signal SIGINT, Interrupt.
|
||||
0xffffffff87fa0de4 in udelay (usec=<value optimized out>) at time.c:78
|
||||
78 while ((tmo - read_c0_count()) < 0x7fffffff)
|
||||
Loading…
Reference in a new issue