Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-11 07:34:31 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/x86/cpu
History
Bin Meng 554778c240 x86: quark: Initialize thermal sensor properly 
Thermal sensor on Quark SoC needs to be properly initialized per
Quark firmware writer guide, otherwise when booting Linux kernel,
it triggers system shutdown because of wrong temperature in the
thermal sensor is detected by the kernel driver (see below):

[    5.119819] thermal_sys: Critical temperature reached(206 C),shutting down
[    5.128997] Failed to start orderly shutdown: forcing the issue
[    5.135495] Emergency Sync complete

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-16 19:53:53 -06:00
..
baytrail x86: baytrail: Remove the fsp_init_phase_pci() call 2015-08-26 07:54:12 -07:00
coreboot x86: coreboot: Convert to use more dm drivers 2015-09-09 07:48:03 -06:00
efi x86: Add relocation and link script for a 64-bit EFI application 2015-08-05 08:44:06 -06:00
ivybridge x86: Enable DM RTC support for all x86 boards 2015-07-28 10:36:22 -06:00
qemu x86: Add DSDT table for supporting ACPI on QEMU 2015-08-26 07:54:14 -07:00
quark x86: quark: Initialize thermal sensor properly 2015-09-16 19:53:53 -06:00
queensbay x86: queensbay: Move unprotect_spi_flash() to arch_misc_init() 2015-08-26 07:54:12 -07:00
call32.S x86: Add a way to call 32-bit code from 64-bit mode 2015-08-05 08:44:07 -06:00
call64.S x86: Tidy up the 64-bit calling code 2015-08-05 08:42:41 -06:00
config.mk x86: Add Kconfig options to be used by arch/x86/cpu/config.mk 2015-07-14 18:03:15 -06:00
cpu.c x86: Switch to using generic global_data setup 2015-08-14 09:50:10 -06:00
cpu_x86.c x86: Move MP initialization codes into a common place 2015-07-14 18:03:16 -06:00
interrupts.c x86: Show the un-relocated IP address in exceptions 2015-08-14 09:50:12 -06:00
ioapic.c x86: Add I/O APIC register access routines 2015-07-14 18:03:17 -06:00
irq.c x86: Allow pirq_init() to return an error 2015-08-14 03:24:21 -06:00
lapic.c x86: Remove inline for lapic access routines 2015-07-14 18:03:17 -06:00
Makefile x86: Add a way to call 32-bit code from 64-bit mode 2015-08-05 08:44:07 -06:00
mp_init.c x86: Set APs' req_seq to the reg number from device tree 2015-08-14 09:50:12 -06:00
mtrr.c x86: Test mtrr support flag before accessing mtrr msr 2015-01-23 17:24:55 -07:00
pci.c x86: Return -1 when reading a PCI config register fails 2015-08-14 09:50:13 -06:00
resetvec.S Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
sipi_vector.S x86: Add multi-processor init 2015-04-30 16:13:38 -06:00
start.S x86: fsp: Add comments about U-Boot entering start.S twice 2015-08-26 07:54:11 -07:00
start16.S x86: fsp: Load GDT before calling FspInitEntry 2015-07-14 18:03:15 -06:00
turbo.c x86: Add Intel speedstep and turbo mode code 2014-11-25 06:34:02 -07:00
u-boot.lds x86: Factor out common values in the link script 2014-11-25 06:33:59 -07:00