u-boot/doc/device-tree-bindings
Patrick Delaunay 53bb831658 stm32mp1: ram: update parameter array initialization
Force alignment of the size of parameters array with
the expected value in the binding, that allows compilation
error when the array size change.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23 11:38:10 +02:00
..
adc dt-bindings: Document STM32 ADC DT bindings 2018-08-03 19:53:10 -04:00
ata x86: ivybridge: Add SATA init 2014-11-25 06:34:01 -07:00
clock stm32mp1: update RCC binding after kernel realignment 2019-05-23 11:36:46 +02:00
cpu nios2: convert nios2 cpu to driver model 2015-10-23 07:37:03 +08:00
exynos s5p: cpu_info: print "cpu-model" if exists in dts 2015-11-02 10:37:59 +09:00
firmware dt/bindings: add bindings for optee 2018-10-07 10:47:38 -04:00
fpga ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10 2019-05-10 22:48:10 +02:00
gpio mips: mscc_sgpio: Add DT bindings documentation 2019-01-16 13:56:43 +01:00
gpu tegra124: dts: Add host1x node to provide display information 2015-05-13 09:24:08 -07:00
i2c DM: I2C: Introduce 'u-boot, i2c-transaction-bytes' property 2019-04-11 15:21:33 +02:00
input x86: Add an i8042 device for boards that have it 2015-11-19 20:13:41 -07:00
leds led: add initial support for bcm6858 2019-04-22 18:13:24 -04:00
mailbox mailbox: Introduce K3 Secure Proxy Driver 2018-09-11 08:32:55 -04:00
memory fdt: Add device tree memory bindings 2018-07-09 09:11:00 -06:00
memory-controllers stm32mp1: ram: update parameter array initialization 2019-05-23 11:38:10 +02:00
misc doc: dtbinding: Add file system firmware loader binding document 2018-09-28 20:22:33 -04:00
mmc ARC: dwmmc: Adding DesignWare MMC driver support for ARC devboards 2019-04-18 09:12:38 +03:00
mtd dt-bindings: mtd: stm32_fmc2: add STM32 FMC2 NAND controller documentation 2019-04-12 16:09:13 +02:00
nand tegra: fdt: Add NAND controller binding and definitions 2012-09-07 13:54:30 -07:00
net net: phy: micrel: Use correct skew values on KSZ9021 2019-05-08 17:27:01 -05:00
pci mvebu: pcie: Add support for GPIO reset for PCIe device 2017-03-23 08:45:25 +01:00
phy phy: usbphyc: Binding update of vdda supply 2019-04-21 10:26:51 +02:00
pinctrl doc: device-tree-bindings: switch from spi-flash to jedec, spi-nor 2019-04-12 10:54:27 +05:30
pmic power: pmic: add Ricoh RN5T567 PMIC support 2016-10-07 12:26:15 +02:00
power power domain: Introduce TI System Control Interface (TI SCI) power domain driver 2018-09-11 08:32:55 -04:00
pwm doc: dtbinding: add pwm binding file 2017-05-10 13:37:21 -06:00
regulator regulator: Add support for ramp delay 2019-03-11 15:53:19 +09:00
remoteproc remoteproc: Introduce K3 remoteproc driver 2018-09-11 08:32:55 -04:00
reset reset: Introduce TI System Control Interface (TI SCI) reset driver 2018-09-11 08:32:55 -04:00
rtc doc: Move device tree bindings documentation to doc/device-tree-bindings 2018-07-24 09:25:23 -04:00
serial serial: pl01x: expose skip_init platdata option in DT 2016-11-28 20:09:47 -05:00
sound sound: Add support for Intel HDA 2019-02-20 15:27:09 +08:00
spi doc: device-tree-bindings: switch from spi-flash to jedec, spi-nor 2019-04-12 10:54:27 +05:30
spmi drivers: spmi: Add support for Qualcomm SPMI bus driver 2016-04-01 17:18:12 -04:00
sysreset sysreset: Add TI System Control Interface (TI SCI) sysreset driver 2018-09-11 08:32:55 -04:00
thermal thermal: ti-bandgap: Add support for temperature sensor 2017-11-21 08:03:38 -05:00
timer dt-bindings: timer: Add andestech atcpit100 timer 2017-11-30 09:39:12 +08:00
tpm2 doc: device-tree-bindings: add Sandbox TPMv2.0 module info 2018-05-25 20:13:00 -04:00
usb stm32mp1: add stusb1600 support for DK1 and DK2 board 2019-04-21 10:26:52 +02:00
video video_osd: Add ihs_video_out driver 2018-09-28 18:26:44 +02:00
w1 w1: Add driver for i.MX bus master controller 2019-01-01 14:12:18 +01:00
w1-eeprom w1-eeprom: Add support for Maxim DS2502 add only memory 2018-11-16 16:51:55 -05:00
chosen.txt bootcount: add uclass for bootcount 2018-12-10 10:04:44 +01:00
config.txt rockchip: rk3399-puma: add code to allow forcing a power-on reset 2017-11-30 22:59:54 +01:00
README fdt: Add staging area for device tree binding documentation 2012-03-29 08:12:47 +02:00
root.txt fdt: Pass the device serial number through devicetree 2015-06-05 08:32:07 -06:00

Device Tree Bindings Staging Area
=================================

This directory contains device tree bindings for U-Boot.

These follow along with Linux kernel bindings, with a few additions. By
adding the files here, U-Boot patches can clearly show thees additions.
This makes it easier for device tree people to review these additions in
patches sent to the U-Boot mailing list.

The intent IS to commit these files to U-Boot. Hopefully at some point
the files will be stored in another repo (shared with Linux) which is
brought in as needed. Changes here are intended to mirror changes in the
Linux Documentation/devicetree/bindings/ directory.

sjg@chromium.org
17-Jan-12