u-boot/arch/arm
Geert Uytterhoeven 68083b897b renesas: Fix RPC-IF compatible values
The compatible values used for device nodes representing Renesas Reduced
Pin Count Interfaces were based on preliminary versions of the Device
Tree Bindings.

Correct them in both DTSi files and drivers, to match the final DT
Bindings.

Note that there are no DT bindings for RPC-IF on RZ/A1 yet, hence the
most logical SoC-specific value is used, without specifying a
family-specific value.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-09-02 13:25:01 +02:00
..
cpu layerscape: Disable CONFIG_FMAN_ENET on *aqds* platforms 2022-08-20 21:18:15 -04:00
dts renesas: Fix RPC-IF compatible values 2022-09-02 13:25:01 +02:00
include net: lpc32xx_eth.c ethernet driver 2022-08-20 21:18:15 -04:00
lib arm: smh: Fix uninitialized parameters with newer GCCs 2022-08-31 12:21:47 -04:00
mach-apple arm: apple: Add initial Apple M2 support 2022-07-25 09:38:47 -04:00
mach-aspeed aspeed/spl: Remove OVERLAY from linker script 2022-07-06 14:32:00 -04:00
mach-at91 arm: Remove snapper9260 board 2022-08-12 16:10:50 -04:00
mach-bcm283x doc: replace @return by Return: 2022-01-19 18:11:34 +01:00
mach-bcmbca arm: bcmbca: introduce the bcmbca architecture and 47622 SOC 2022-06-10 13:37:32 -04:00
mach-bcmstb
mach-cortina
mach-davinci arm: Remove unused references to CONFIG_SOC_DM* 2022-07-25 14:57:27 -04:00
mach-exynos arm: samsung: Migrate a number of symbols to Kconfig 2022-06-28 17:04:37 -04:00
mach-highbank
mach-hpe ARM: hpe: gxp: add core support 2022-06-22 21:30:04 -04:00
mach-imx arm: Remove warp board 2022-08-20 22:45:00 -04:00
mach-integrator arm: integrator: Migrate platform-specific options and cleanup armcoremodule.h 2022-04-08 09:05:19 -04:00
mach-ipq40xx
mach-k3 arm: mach-k3: security: Remove certificate if detected on GP device 2022-08-04 15:32:20 -04:00
mach-keystone i2c: Remove non-DM_I2C support from davinci_i2c.c 2022-07-08 17:57:34 -04:00
mach-kirkwood board: lsxl: make last resort recovery more reliable 2022-08-23 12:40:00 +02:00
mach-lpc32xx net: lpc32xx_eth.c ethernet driver 2022-08-20 21:18:15 -04:00
mach-mediatek
mach-meson ARM: meson: fixup error on efuse commands return 2022-08-08 09:56:38 +02:00
mach-mvebu arm: kirkwood: make it CONFIG_TIMER aware 2022-08-23 12:38:54 +02:00
mach-nexell video: Drop references to CONFIG_VIDEO et al 2022-03-28 20:17:07 +02:00
mach-npcm arm: nuvoton: Add support for Nuvoton NPCM750 BMC 2022-05-05 09:28:47 -04:00
mach-octeontx
mach-octeontx2
mach-omap2 arm: Remove cm_t335 board 2022-08-20 21:18:15 -04:00
mach-orion5x arm: Remove edminiv2 board 2022-08-20 21:18:15 -04:00
mach-owl
mach-qemu
mach-rmobile arm: Remove kzm9g board 2022-08-20 21:18:15 -04:00
mach-rockchip Merge branch 'next' 2022-07-11 14:58:57 -04:00
mach-s5pc1xx doc: replace @return by Return: 2022-01-19 18:11:34 +01:00
mach-snapdragon board: qualcomm: Add support for QCS404 EVB 2022-07-25 13:02:04 -04:00
mach-socfpga socfpga: arria10: Allow dcache_enable before relocation 2022-07-01 14:57:15 +08:00
mach-sti stm32mp1: fix reference for STMicroelectronics 2022-06-17 14:12:27 +02:00
mach-stm32 configs: stm32f746-disco: Migrate SPL flags to defconfig 2022-05-10 13:56:12 +02:00
mach-stm32mp stm32mp: add support of STM32MP13x Rev.Y 2022-07-12 11:47:34 +02:00
mach-sunxi sunxi: Move INITIAL_USB_SCAN_DELAY to driver Kconfig 2022-07-18 23:48:09 +01:00
mach-tegra Convert CONFIG_TEGRA_GPU to Kconfig 2022-06-28 17:03:31 -04:00
mach-u8500
mach-uniphier serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
mach-versal spi: cadence_qspi: Enable apb linear mode for apb read & write operations 2022-06-29 16:00:31 +02:00
mach-versatile
mach-zynq fpga: xilinx: add bitstream flags to driver desc 2022-07-26 09:34:21 +02:00
mach-zynqmp mailbox: zynqmp: Move struct zynqmp_ipi_msg from sys_proto.h 2022-07-26 08:36:20 +02:00
mach-zynqmp-r5
thumb1/include/asm/proc-armv
config.mk linker_lists: Rename sections to remove . prefix 2022-06-23 12:58:18 -04:00
Kconfig arm: Set default MACH_TYPE in Kconfig 2022-08-20 16:17:50 -04:00
Kconfig.debug
Makefile arm: makefile: cleanup mach-imx usage 2022-07-26 11:29:00 +02:00